Program Features: AUTHORIZED SERVICE AGENT. Quality repairs using genuine IR parts Access to an IR owned service center

AUTHORIZED SERVICE AGENT Proper service of Ingersoll Rand/ARO air motors with quality-authorized parts will help prevent wear and tear, eliminate downtime and extend a product s life. That s why Ingersoll Rand (IR) has created a program that provides service and repairs to the end user through the use of Authorized Service Agents. This newly developed program ensures that Ingersoll Rand maintenance and repair standards are met, through the use of genuine parts and service. maintenance, products can be taken directly to any program has been set up to make certain that the air motor is put into the hands of reliable, fully trained IR service technicians. This process ensures that you have access to the expertise and resources of a full service center, regardless of geographic location. Program Features: Quality repairs using genuine IR parts Access to an IR owned service center Receive your quote in 48 hours or less 9 day repair warranty

B 321 214 17 W.) 153 229.5 117.4 176.1 89 133.5 46.2 69.3 T..) 76.5 58.7 A 44.5 W 24 23.1 18 12 6 339 678 117 3.3 484M 484P 484Q 484S 339 678 165 122 89 59 AIR CO S MPTIO 9 PS T 9 PSI 7 PSI 7 PSI B 9 PSI 33 244 178 118 177 144 96 48 2.2 1.1 117 495 366 267 PO

STALL TORQUE STARTING TORQUE TORQUE TORQUE POWER POWER SPEED

STALL TORQUE STARTING TORQUE TORQUE AT 9 PSIG (62 kpa) TORQUE POWER AT 9 PSIG (62 kpa) POWER POWER AT 6 PSIG (414 kpa) TORQUE AT 6 PSIG (414 kpa) SPEED TORQUE 9:1 TORQUE POWER 9:1 POWER 3:1 POWER, DIRECT DRIVE POWER TORQUE 3:1 TORQUE, DIRECT DRIVE SPEED

A i r S p e e d a t T o r q u e a t A i r Air Free Consumption Maximum Maximum Maximum Consumption Stall or Pressure Speed at Free Speed Power Horsepower Horsepower at Max. Power Starting Torque (psig) (rpm) (scfm) (hp) (rpm) (Ib.-ft.) (scfm) (Ib.-ft.) 4 8% 45% 3% 8% 37.5% 45% 45% 5 84% 56% 44% 84% 52.4% 56% 56% 6 88% 67% 58% 88% 65.9% 67% 67% 7 92% 78% 72% 92% 78.3% 78% 78% 8 96% 89% 86% 96% 89.6% 89% 89% 9 1% 1% 1% 1% 1.% 1% 1% 1 14% 111% 114% 14% 19.6% 111% 111% C h a r a c t e r i s t i c P e r f o r m a n c e P e r c e n t a g e P e r f o r m a n c e at 9 psig Reduction at 6 psig M a x i m u m P o w e r ( h p ) 1. 3 5 x 5 8 % =. 7 8 F r e e S p e e d ( r p m ) 4 4 x 8 8 % = 3 8 7 Speed at Max Power (rpm) 215 x 88% = 189 Max (Stall) Torque (Ib.-ft.) 53.5 x 67% = 35.8 Torque at Max Power (Ib.-ft.) 33 x 65.9% = 21.7 S t a r t i n g T o r q u e ( I b. - f t. ) 4 x 6 7 % = 2 6. 8 Air Consumption at Free Speed (scfm) 54 x 67% = 36.2 Air Consumption at Max HP (scfm) 44 x 67% = 29.5 Air Regulation Speed Torque Reduced air pressure, or Reduced Greatly r e s t r i c t i n g v o l u m e o f a i r t o R e d u c e d motor Choking or restricting exhaust Greatly Reduced Reduced

NON-REVERSIBLE -.1 H.P. REVERSIBLE -.1 H.P.. 1 1 2.16.51.12 1.44.34.8 TORQUE (LB. FT.). 8 8. 6 6. 4 4 POWER (HP).72.17.4. 2 2 SPEED ( RPM ) M o d e l 8 6 1 8 - A, 1 8 6 1 1 - A, 8 6 1 4 - A, 8 6 1 7 - A, 6 5 8 6 1 - A, 8 6 1 3 - A, 8 6 1 6 - A 3 8 16, 2 2 4, 3 1 3, 3 4, 9 5 3 66 9 9 4158 4157

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. M2RHRAR3.25.19 12,25 26,.15.2.2.27 12..34 1.46 M2RHR4AR3.22.16 325 692.45.61.61.83 11.9.34 1.46 M2RHR6AR3.22.16 26 4385.72.98.96 1.3 11 9.34 1 8.49 M2RHR8AR3.22.16 152 324.98 1.33 1.31 1.78 11.9.34 1.46 M2RHR13AR3.19.14 88 184 1.36 2.5 1.82 2.47 11.8.33 1 1 8.5 M2RHR21AR3.19.14 555 1165 2.16 2.93 2.88 3.9 11.8.33 1 1 8.5 M2RHR28AR3.19.14 41 86 2.92 3.96 3.9 5.29 11.8.33 1 1 8.5 M2RHR44AR3.19.14 262 545 4.61 6.25 6.15 8.34 11.8.33 1 1 8.5 M2RHR11AR3.16.12 112 228 *8.32 *11.2 *11.1 *15. 11.7.33 1 3 16.54 M2RHR159AR3.16.12 71 145 *13.1 *17.7 *17.5 *23.7 11.7.33 1 3 16.54 Reversible M2RVRAR3.2.15 11,5 23,.13.18.18.24 9.8.28 1.46 M2RVR4AR3.17.13 345 69.4.54.54.73 9.7.27 1.46 M2RVR6AR3.17.13 193 386.64.87.86 1.17 9.7.27 1 8.49 M2RVR8AR3.17.13 1425 285.87 1.18 1.16 1.57 9.7.27 1.46 M2RVR13AR3.14.1 82 1645 1.17 1.58 1.56 2.11 9.6.27 1 1 8.5 M2RVR21AR3.14.1 52 145 1.85 2.51 2.47 3.35 9.6.27 1 1 8.5 M2RVR28AR3.14.1 385 77 2.5 3.39 3.34 4.53 9.6.27 1 1 8.5 M2RVR44AR3.14.1 24 485 3.96 5.37 5.28 7.16 9.6.27 1 1 8.5 M2RVR11AR3.11.8 14 29 *6.78 *9.19 *9.5 *12.2 9.5.27 1 3 16.54 M2RVR159AR3.11.8 66 132 *1.7 *14.5 *14.2 *19.3 9.5.27 1 3 16.54 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. * Applications with these models must be limited to 12 lb.-ft. (16.3 Nm) torque. Performance figures are at 9 psig (62 kpa) air pressure. W.) 24 16 8.96 1.44.7 1.5.44.66.14.21 T..) W AIR CO MPTIO 9 PSI 24 48 72.24 9 PSI 7 PSI T 9 PSI OA 15 1 5.16.8 PO 6.69 4.46 W.) 4.26 2.84 3.15 2.1 1.98 1.32 24 16 8 T..) W AIR CO S MPTIO 9 PS 7 PSI A 635 127 195.21 9 PSI 7 PSI T 15 1 5.14.7 PO.48.35.22.7 7 PSI 2.23 1.42 1.5.66 7 PSI 3 3 3 3 9 18 24 152 112 48 34 224 27 72 456 336 635 127 4 3 185 8 6 37 195 12 9 555

W.) T T 8 24 16 8 T..) W AIR CO S MPTIO 7 PS 8 16 24.18 9 PSI 7 PSI T 15 1 5.12.6 PO 1.26.84 W.).93.62.6.4.21.14 24 16 8 2115 423 6345 T..) AIR COPTIO 9 PSI 7 PSI.18 9 PSI 7 PSI T OA 15 1 5.12.6 PO 6.3 4 8 16 24 5 1 15 W.) 24 16 8 T..) W 57 114 171.15 15 1 5.1.5 1.88 1.19.88.56.42.31.2.7 7 PSI M2RVRAR3 M2RVR4AR3 M2RVR6AR3 M2RVR8AR3 8 16 2115 134 99 423 268 198 24 6345 42 297 5.64 3.76 3.57 2.38 2.64 1.76 1.68 1.12 9 PSI 7 PS T 9 PSI 7 PSI PO W.) T 1.2 9.69 6.46 24 16 8 T..) W 7 14 215.12 9 PSI 7 PSI 15 1 5.8.4 PO 7 PSI 5.1 3.23 T 9 PSI 9 PSI 7 PSI A M2RVR13AR3 M2RVR21AR3 M2RVR28AR3 M2RVR44AR3 57 114 36 27 17 72 54 34 171 18 81 51 M2RVR11AR3 M2RVR159AR3 7 14 21 45 9 135

1.25" (31.75mm) 1.25" (31.75mm).394" R (1.mm) 1.624" DIA (41.25mm).33" DIA (8.375mm) "A" FLANGE.965" DIA (24.5mm) #6-32 UNC-2B THD. 4-PLACES.325" (8.25mm) DEEP.125" SQ. KEY (3.175mm).625" LONG (15.88mm).3748" DIA.374" DIA (9.52mm) (9.5mm) 1.498" DIA 1.496" DIA (38.5mm) (38.mm) INLETS AND FLANGES CAN BE RELOCATED RELATIVE TO EACH OTHER IN INCREMENTS OF 15.88" (2.25mm) 1." (25.4mm).315" (8.mm) SHAFT RADIAL LOAD 1.34" DIA (33.125mm) FEMALE PILOT.671" DIA (17.5mm).669" DIA (17.mm).128" DEEP (3.25mm) "B" FLANGE 4 HOLE MOUNTING Mounting Face of "B" Flange Mounting Face of "A" Flange 1.34" DIA (33.125mm).345" (8.75mm) E NON-REVERSIBLE A 1.156" (29.38mm) 1.34" DIA (33.125mm) PRIMARY EXHAUST 1/8" NPT INLET 1/4" NPT EXHAUST 1/8" NPT 3-PLACES FORWARD INLET.665" (16.89mm) PRIMARY EXHAUST 2.1" (51.6mm) 1.34" DIA (33.125mm) E E REVERSIBLE 1.34" (33.125mm) 1.67" (42.44mm) OPTIONAL SIDE EXHAUST HOUSING FOR REVERSIBLE MODELS.659" (16.75mm).556" (14.13mm).58" (14.72mm) 1/8" NPT 3-PLACES.522" (13.27mm) M 2 RV R 28 A R3 Motor HP Rotation Air Inlet Gear Flange Shaft & Exhaust Ratio G e a r R a t i o s A (Refer to Model No.) in. mm, 4, 8 4.989 126.73 6, 13, 21, 28, 44 5.51 139.93 11, 159 6.2 152.91 Furnished with Cataloged Models Standard Options Extra Options 2 Hole Flange 4 Hole Face R144-212-1 Mounting Mounting 3 8" Square Drive Adapter, 1" long with 3 8" Round Keyed 3 8"-24 Threaded Shaft 3 8" -24 Female threads S h a f t f o r u s e with Threaded Shaft. Side Inlet and Exhaust Housing Required for 3 8" Adapter (for Reversible (2) 4UA9-561 set screws Models only) (1) 8U-722 Bail

NON-REVERSIBLE -.25 H.P. REVERSIBLE -.25 H.P. *Requires installation for reversible motors - shown on page 85. 9.36 9.84 5.7 6. 1.92 2.1 1.17 1.26.258.264 6.24 6.56 3.8 4. 1.28 1.4.78.84.172.176 TORQUE (LB. FT.). 3. 2 4. 1 8. 1 2 POWER (HP) 3.12 3.28 1.9 2..64.7.39.42.86.88. 6 SPEED ( RPM ) M o d e l 7 5 3 7 - C, 7 5 3 7-2 - C, 7 5 4 2 - C, 6 7 5 4 7 - C, 5 9 7 5 3 6 - B, 7 5 3 6-2 - B, 7 5 4 1 - B, 4 7 7 5 4 6 - B, 4 6 5 7 5 3 5 - C, 7 5 3 5-2 - C, 7 5 4 - B 8 5 7 5 4 5 - B 8 7 5 3 4 - B, 7 5 3 4-2 - B, 7 5 3 9 - B 9 4 7 5 4 4 - B 8 9 7 5 3 3 - B, 7 5 3 3-2 - B, 7 5 3 8 - B 8 7 5 4 3 - B 7 5 6 13, 2 1 9, 8 6 13, 1 8 1 9, 7 7 1 2, 9 4 4, 4 1 1 2, 9 3 4, 3 9 5 8 1, 7 7 2, 6 5 5 8 1, 7 6 2, 6 4 2 58 8 8 8 2 2 57 8 8 6 7 1 36 5 4 1 35 5 2 5 37898 37899

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. M4RHRAR3.5.37 1, 18,.4.54.53.72 2..57 2 1 16.95 M4RHR4AR3.47.35 247 445 1.46 1.98 1.94 2.63 19.5.55 2 3 16 1. M4RHR6AR3.47.35 149 268 2.42 3.28 3.22 4.37 19.5.55 2 3 16 1. M4RHR11AR3.44.33 825 149 3.92 5.32 5.22 7.8 19..54 2 3 8 1.9 M4RHR15AR3.44.33 61 195 5.32 7.21 7.1 9.63 19..54 2 3 8 1.9 M4RHR23AR3.44.33 395 715 8.1 11. 1.8 14.6 19..54 2 3 8 1.9 M4RHR33AR3.44.33 28 55 11.5 15.6 15.4 2.8 19..54 2 3 8 1.9 M4RHR5AR3.41.31 175 315 *16.5 *22.4 *22.1 *3. 18.5.52 2 11 16 1.22 M4RHR83AR3.41.31 16 19 *27.5 *37.3 *36.7 *49.7 18.5.52 2 11 16 1.22 M4RHR167AR3.41.31 53 95 *55. *74.5 *73.3 *99.4 18.5.52 2 11 16 1.22 Reversible M4RVRAR3.4.3 8 16,.32.43.42.57 19..54 2 1 16.95 M4RVR4AR3.37.28 1975 3955 1.13 1.53 1.51 2.5 18.5.52 2 3 16 1. M4RVR6AR3.37.28 119 238 1.88 2.55 2.51 3.4 18.5.52 2 3 16 1. M4RVR11AR3.34.25 66 1325 3. 4.7 4. 5.42 18..51 2 3 8 1.9 M4RVR15AR3.34.25 485 975 4.7 5.52 5.43 7.36 18..51 2 3 8 1.9 M4RVR23AR3.34.25 315 635 6.23 8.45 8.3 11.2 18..51 2 3 8 1.9 M4RVR33AR3.34.25 225 45 8.85 12. 11.8 16. 18..51 2 3 8 1.9 M4RVR5AR3.31.23 14 28 *12.3 *16.7 *16.5 *22.4 17.5.5 2 11 16 1.22 M4RVR83AR3.31.23 84 169 *2.6 *27.9 *27.5 *37.3 17.5.5 2 11 16 1.22 M4RVR167AR3.31.23 42 85 *41.3 *56. *55. *74.5 17.5.5 2 11 16 1.22 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. * Applications with these models must be limited to 33 lb.-ft. (44.7 Nm) torque. Performance figures are at 9 psig (62 kpa) air pressure. W.) 3.48 2.32 2.1 1.4.57.38 45 3 15 T..) W AIR CO MPTIO 9 PS 16 32 48.51 9 PSI 7 PSI 24 16 8.34.17 PO 19.5 13. W.) 13.8 9.2 9 6 6.6 4.4 45 3 15 T..) W 4 8 12.48 9 PSI 7 PSI 7 PSI OA 24 16 8.32.16 PO 1.16.7.19 647 1294 16 964 T 9 PSI 7 PSI 32 1928 1941 48 2892 6.5 4.6 3 2.2 542 184 4 262 184 7 PSI T 9 PSI 7 PSI 8 524 368 1626 12 786 552

W.) T) T) 26 23.4 31.2 15.6 45 3 15 T..) W 9 PSI 7 14 21.45 9 PSI 7 PSI 7 PSI 24 16 8.3.15 26 13 7.8 T 9 PSI A PO W.) 3. 2. 1.8 1.2.51.34 45 3 15 T..) W 9 PSI 135 27 45.39 9 PSI 7 PSI T 24 16 8.26.13 PO 116 232 7 35 14 7 348 21 15 13.5 8.7 1..6.17 M4RVRAR3 M4RVR4AR3 M4RVR6AR3 546 192 135 813 27 1626 1638 45 2439 4.35 W.) 9.3 6.2 3.1 6 4 2 4.41 2.94 1.47 45 3 15 T..) W 9 PSI 34 68 12.36 9 PSI 7 PSI T 7 PS 24 16 8.24.12 PO W.) T) 2 T) 3 2 1 24 3 18 12 6 45 3 15 T..) W 6 12 18.36 9 PSI 7 PSI TORQ 9 PSI 7 PSI 24 16 8.24.12 PO M4RVR11AR3 M4RVR15AR3 M4RVR23AR3 M4RVR33AR3 46 92 34 222 156 68 444 312 138 12 666 468 M4RVR5AR3 M4RVR83AR3 M4RVR167AR3 ) 1 2 6 3 12 6 3 18 9

M 4 RV R 23 A R3 Motor HP Rotation Air Inlet Gear Flange Shaft & Exhaust Ratio G e a r R a t i o s A (Refer to Model No.) in. mm, 4, 6 6.248 158.69 11, 15, 23, 33 6.984 177.38 5, 83, 167 7.745 196.73 Furnished with Cataloged Models Standard Options Extra Options 2 Hole Flange 4 Hole Face R144-212-1 Mounting Mounting 3 8" Square Drive Adapter, 1" long with 3 8" Round Keyed 3 8"-24 Threaded Shaft 3 8" -24 Female threads S h a f t f o r u s e with Threaded Shaft. Side Inlet and Exhaust Housing Required for 3 8" Adapter (for Reversible (2) 4UA9-561 set screws Models only)

NON-REVERSIBLE -.6 H.P. REVERSIBLE -.5 H.P. *Requires installation for reversible motors - shown on page 88.. 6 5. 5 5. 5 2. 4 4 28.8 23.52 17.76 14.4 9. 5.4 4.2 2.58.84 19.2 15.68 11.84 9.6 6. 3.6 2.8 1.72.56 TORQUE (LB. FT.). 3 9. 2 6 POWER (HP) 23.28 18.6 14.16 11.4 7.8 4.2 3.48 2.4.63 15.52 12.4 9.44 7.6 4.72 2.8 2.32 1.36.42 TORQUE (LB. FT.). 3 3. 2 2 POWER (HP) 9.6 7.84 5.92 4.8 3. 1.8 1.4.86.28. 1 3 7.76 6.2 4.72 3.8 2.36 1.4 1.16.68.21. 1 1 SPEED ( RPM ) SPEED ( RPM ) M o d e l 8 2 2 9-1 A, 8 2 3-1 A, 8 2 3 2-1, 8 2 2 9-2 A, 8 2 3-2 A, 8 2 3 2-2, 8 8 2 2 9-3 A, 8 2 3-3 A, 8 2 3 2-3, 1 1 8 2 2 9-4 A, 8 2 3-4 A, 8 2 3 2-4 8 8 8 2 2 9-5 A, 8 2 3-5 A, 8 2 3 2-5 2 8 2 2 9-6 A, 8 2 3-6 A, 8 2 3 2-6 1 5 8 2 2 9-7 A, 8 2 3-7 A, 8 2 3 2-7 5 2 8 2 2 9-8 A, 8 2 3-8 A 8 9 8 2 2 9-9 A, 8 2 3-9 A 5 9 6 12, 1 8, 1 3, 6 5, 4 1 2, 2 2 3, 3 3 8 1, 7 7 6 2, 6 6 4 5 1, 4 1, 5 6 3 63 9 4 5 2 5 4 7 5 6 1 37 8 5 6 7 1 31 8 4 7 7 M o d e l 8 2 3 1-1 B 5, 7 11, 4 1 7, 1 8 2 3 1-2 B 1, 6 8 3, 3 6 5, 4 8 2 3 1-3 B 1, 2 2, 4 3, 6 8 2 3 1-4 B 8 2 5 1, 6 5 2, 4 7 5 8 2 3 1-5 B 4 7 1 94 2 1, 4 1 3 8 2 3 1-6 B 3 6 9 8 2 3 1-7 B 2 3 7 47 4 7 1 1 8 2 3 1-8 B 1 8 3 36 6 5 4 9 8 2 3 1-9 B 1 5 3 4 5 37896 37897

5.16

NON-REVERSIBLE -.6 H.P. REVERSIBLE -.5 H.P. *Requires installation for reversible motors - shown on page 88.. 5 5. 4 4 54. 3. 24. 16.56 13.44 4.2 3.48 44. 36. 2. 16. 11.4 8.96 2.8 2.32 45.92 36.8 22. 18. 1. 8. 5.52 4.48 1.4 1.16 TORQUE (LB. FT.). 3 3. 2 2. 1 1 POWER (HP) 42.6 34. SPEED ( RPM) M o d e l 8 2 2 8-2 B 1, 2 2, 4 3, 6 8 2 2 8-3 B 8 2 5 1, 6 5 2, 4 7 5 8 2 2 8-5 B 2 5 5 51 7 6 5 8 2 2 8-6 B 2 4 4 8 6 1 2 8 2 2 8-7 B 1 3 5 27 4 5 8 2 2 8-8 B 1 1 1 222 3 3 3 8 2 2 8-9 B 6 3 12 6 1 8 9 8 2 2 8-1 B 5 1 1 2 1 5 3 8 2 2 8-1 1 B * 3 2 64 96 8 2 2 8-1 2 B * 2 7 54 81 8 2 2 8-1 3 B * 1 6 32 48 8 2 2 8-1 4 B * 1 3 26 39 * N O T E : Maximum torque recommended for p l a n e t a r y ge a r system on th ese models r e q u i r e s s h e a r k e ywith 6 ft. / lbs. s h e a r s t r e n g t h. 37895-1

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. M7RHRAR4.85.63 11, 22,.58.79.77 1.4 36 1.2 3 1 16 1.4 M7RHR4AR4.82.61 2445 489 2.39 3.24 3.19 4.33 36 1.2 3 1 16 1.4 M7RHR6AR4.82.61 1675 335 3.5 4.75 4.66 6.32 36 1.2 3 1 16 1.4 M7RHR9AR4.82.61 123 246 4.76 6.45 6.34 8.6 36 1.2 3 1 16 1.4 M7RHR12AR4.79.59 87 174 6.19 8.39 8.25 11.2 36 1.2 3 1 2 1.6 M7RHR15AR4.79.59 685 137 7.8 1.6 1.4 14.1 36 1.2 3 1 2 1.6 M7RHR21AR4.79.59 47 94 11.5 15.6 15.3 2.7 36 1.2 3 1 2 1.6 M7RHR27AR4.79.59 37 74 14.5 19.7 19.3 26.2 36 1.2 3 1 2 1.6 M7RHR37AR4.79.59 27 54 19.7 26.7 26.3 35.7 36 1.2 3 1 2 1.6 M7RHR44AR4.79.59 232 465 23.2 31.5 3.9 41.9 36 1.2 3 1 2 1.6 M7RHR63BR6.79.59 161 321 33.5 45.4 44.7 6.6 36 1.2 7 1 8 3.2 M7RHR86BR6.79.59 118 236 45.7 62. 6.9 82.6 36 1.2 7 1 8 3.2 M7RHR119BR6.76.57 82 163 6.5 82. 8.7 19. 36 1.2 7 3 8 3.4 M7RHR151BR6.76.57 65 129 76.5 14. 12. 138. 36 1.2 7 3 8 3.4 M7RHR188BR6.76.57 52 13 96. 13. 128. 174. 36 1.2 7 3 8 3.4 M7RHR275BR6.76.57 35 7 *14. *19. *187. *254. 36 1.2 7 3 8 3.4 M7RHR374BR6.76.57 26 52 *191. *259. *254. *344. 36 1.2 7 3 8 3.4 Reversible M7RVRAR4.7.52 1, 2,.47.64.63.85 33.93 3 1 16 1.4 M7RVR4AR4.67.5 2225 445 1.94 2.63 2.59 3.51 33.93 3 1 16 1.4 M7RVR6AR4.67.5 152 345 2.84 3.85 3.78 5.13 33.93 3 1 16 1.4 M7RVR9AR4.67.5 112 224 3.86 5.23 5.14 6.97 33.93 3 1 16 1.4 M7RVR12AR4.64.48 79 158 4.97 6.74 6.63 8.99 33.93 3 1 2 1.6 M7RVR15AR4.64.48 625 125 6.29 8.53 8.38 11.4 33.93 3 1 2 1.6 M7RVR21AR4.64.48 425 855 9.2 12.5 12.2 16.5 33.93 3 1 2 1.6 M7RVR27AR4.64.48 335 675 11.6 15.7 15.5 2.1 33.93 3 1 2 1.6 M7RVR37AR4.64.48 245 495 15.8 21.4 21.1 28.6 33.93 3 1 2 1.6 M7RVR44AR4.64.48 21 42 18.6 25.2 24.8 33.6 33.93 3 1 2 1.6 M7RVR63BR6.64.48 146 292 26.9 36.5 35.9 48.7 33.93 7 1 8 3.2 M7RVR86BR6.64.48 17 215 36.7 49.8 48.9 66.3 33.93 7 1 8 3.2 M7RVR119BR6.61.46 74 148 48.1 65.3 64.1 87. 33.93 7 3 8 3.4 M7RVR151BR6.61.46 58 117 61. 82.7 81.3 11. 33.93 7 3 8 3.4 M7RVR188BR6.61.46 47 94 76.5 14. 12. 138. 33.93 7 3 8 3.4 M7RVR275BR6.61.46 32 64 *111. *151. *148. *21. 33.93 7 3 8 3.4 M7RVR374BR6.61.46 23 47 *152. *26. *22. *274. 33.93 7 3 8 3.4 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. * Applications with these models must be limited to 224 lb.-ft. (34 Nm) torque. Performance figures are at 9 psig (62 kpa) air pressure.

6.84 4.56 W.) 5.4 3.36 3.45 2.3.84.56 6 4 2 T..) W 17 34 51.9 9 PSI 7 PSI 45 3 15.6.3 PO 66.3 44.2 22.1 48.6 32.4 16.2 33.6 22.4 11.2 28.5 19. 9.5 21. 14. 7. W.) 16.8 11.2 5.6 11.4 7.6 3.8 9 6 3 12 8 4 W 6 12 18.84 T..) 9 PSI 9 PSI 7 PSI 7 PSI B OA A T 9 PSI 7 PSI 45 3 15.56.28 PO 2.28 1.68 1.15.28 7635 1527 17 1164 855 TORQ 9 PS 7 PS 34 2328 171 2295 51 3492 2565 6 12 474 325 256 948 65 512 18 1422 975 768 188 376 564 16 32 48 11 81 22 162 33 243 A B T ) T ) 21 W.) 138 111 87 182 134 92 74 58 12 8 4 T..) W 7 PSI 58 116 174.84 9 PSI 7 PSI A 45 3 15.56.28 PO 5.67 91 67 46 37 29 3.78 W.) 4.17 2.78 2.85 1.9.69.46 6 4 2 T..) W 9 PSI 155 31 465.75 9 PSI 7 PSI 45 3 15.5.25 PO T 9 PSI 7 PSI 1.89 1.39.95.23 TORQ 9 PS 7 PSI 58 116 46 37 25 18 92 74 5 36 174 138 111 75 54 M7RVRAR4 M7RVR4AR4 M7RVR6AR4 M7RVR9AR4 6965 1393 155 16 78 31 212 156 2895 465 318 234

55.5 37. 4.8 27.2 18.5 13.6 28.2 18.8 9.4 24. 16. 8. 17.7 11.8 5.9 W.) 13.8 9.2 4.6 9.6 6.4 3.2 7.5 5. 2.5 12 8 4 W 55 11 165.69 T..) 9 PSI 7 PSI B OA A T 9 PSI 7 PSI 45 3 15.46.23 PO T 219 T 159 W.) 111 9 69 146 16 74 6 46 12 8 4 T..) W 52 14 156.66 9 PSI 7 PSI 9 PSI T 9 PSI A 45 3 15.44.22 PO M7RVR12AR4 M7RVR15AR4 M7RVR21AR4 M7RVR27AR4 M7RVR37AR4 M7RVR44AR4 M7RVR63BR6 M7RVR86BR6 55 11 435 298 235 12 75 87 596 47 24 15 165 135 894 75 173 346 519 147 294 441 36 225 RV A B 73 53 37 3 23 M7RVR119BR6 M7RVR151BR6 M7RVR188BR6 M7RVR275BR6 M7RVR374BR6 52 14 41 33 22 17 7 PSI 82 66 44 34 156 123 99 66 51 Furnished with Cataloged Models 2 Hole Flange Mounting on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 6 Hole Face Mounting on Gear Ratios: 63, 86, 119, 151, 188, 275, 374 1 2" Round Keyed Shaft on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 3 4" Round Keyed Shaft on Gear Ratios: 63, 86, 119, 151, 188, 275, 374 Standard Options 4 Hole Flange Mounting on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 Side Inlet and Exhaust Housing (for Reversible Models only) 3 8" 24 or 1 2" 2 Threaded Shaft on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 Extra Options 1 2" Square Drive Shaft on Gear Ratios:, 4, 6, 9, 12, 15, 21, 27, 37, 44 5 8" Square Drive Shaft on Gear Ratios: 63, 86, 119, 151, 188, 275, 374

M 7 RV R 21 A R4 Motor HP Rotation Air Inlet Gear Flange Shaft & Exhaust Ratio Gear Ratios A B C (Refer to Model No.) in. mm in. mm in. mm, 4, 6, 9 7.362 187. 12, 15, 21, 27, 37, 44 8.133 26.56 63, 86 9.343 237.3.41 1 2.3 58.4 119, 188, 275, 374, 151 1.937 277.8 2.19 56 3.9 99.

NON-REVERSIBLE -.85 H.P. REVERSIBLE -.7 H.P. *Requires installation for reversible motors - shown on page 88.. 9. 7 5. 7 2. 6 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8 TORQUE (LB. FT.). 5 4. 3 6 POWER (HP) 64.8 34.8 18.6 8.88 4.8 1.2 43.2 23.2 12.4 5.92 3.2.8 TORQUE (LB. FT.). 4 5. 3 POWER (HP) 22. 12. 6.4 3. 1.6.4. 1 8 21.6 11.6 6.2 2.96 1.6.4. 1 5 SPEED ( RPM ) SPEED ( RPM) M o d e l 7 8 - B ( - 1 B, - 2 B, - 4 B ), 7 1 1, 4 7 8 1 - B ( - 1 B, - 2 B, - 3 B, - 4 B ), 4 4 2, 8 8 7 8 2 - B ( - 1 B, - 2 B, - 4 B ) 79 5, 5 9 7 8 3 - B ( - 1 B, - 2 B, - 3 B, - 4 B ) 37 8 5 6 7 8 4 - B ( - 1 B, - 2 B, - 3 B ) 2 4 8 7 8 5 - B ( - 1 B, - 3 B, - 4 B ) 11 2 5 1 7, 1 1 4, 3 2 1 2, 3 8 5 7 1, 1 3 4 4 6 1 2 2 3 3 M o d e l 7 8 6 - B ( - 1 B ) 4, 3 8 5 8, 7 7 1 3, 1 5 5 7 8 7 - B ( - 1 B ) 1, 8 6 2, 1 7 2 3, 2 5 8 7 8 8 - B ( - 1 B ) 5 7 6 1, 1 5 2 1, 7 2 8 7 8 9 - B ( - 1 B ) 2 7 3 54 6 8 1 9 7 8 1 - B ( - 1 B ) 1 4 4 28 8 4 3 2 7 8 1 1 - B ( - 1 B ) 8 16 2 4 37893 37894

G H I L

NON-REVERSIBLE -.85 H.P. REVERSIBLE -.7 H.P. *Requires installation for reversible motors - shown on page 88.. 9. 9. 7 2. 7 2 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8 TORQUE (LB. FT.). 5 4. 3 6 POWER (HP) 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8 TORQUE (LB. FT.). 5 4. 3 6 POWER (HP) 22. 12. 6.4 3. 1.6.4. 1 8 22. 12. 6.4 3. 1.6.4. 1 8 SPEED ( RPM ) SPEED ( RPM ) M o d e l 7 8 - B ( - 1 B, - 2 B, - 4 B ), 7 1 1, 4 7 8 1 - B ( - 1 B, - 2 B, - 3 B, - 4 B ), 4 4 2, 8 8 7 8 2 - B ( - 1 B, - 2 B, - 4 B ) 79 5, 5 9 7 8 3 - B ( - 1 B, - 2 B, - 3 B, - 4 B ) 37 8 5 6 7 8 4 - B ( - 1 B, - 2 B, - 3 B ) 2 4 8 7 8 5 - B ( - 1 B, - 3 B, - 4 B ) 11 2 5 1 7, 1 1 4, 3 2 1 2, 3 8 5 7 1, 1 3 4 4 6 1 2 2 3 3 M o d e l 78 1 4 - B ( - 1 B ) 5, 7 1 1, 4 1 7, 1 78 1 6 - B ( - 1 B ) 1, 4 4 2, 8 8 4, 3 2 78 1 7 - B ( - 1 B ) 7 9 5 1, 5 9 2, 3 8 5 78 1 5 - B ( - 1 B ) 3 7 8 7 5 6 1, 1 3 4 78 1 3 - B ( - 1 B ) 2 4 4 8 6 1 2 78 1 2 - B ( - 1 B ) 1 1 2 2 3 3 37895-1

NON-REVERSIBLE -.9 H.P. REVERSIBLE -.65 H.P. *Requires installation for reversible motors - shown on page 88. 1. 7 5. 8. 6 126. 72. 6. 32.4 147. 84. 48. 4. 21.6 TORQUE (LB. FT.). 6. 4 POWER (HP) 19.2 62.4 51.6 27.6 15.6 127.4 72.8 41.6 34.4 18.4 1.4 TORQUE (LB. FT.). 4 5. 3 POWER (HP) 136.5 73.5 42. 24. 2. 1.8. 2 118.29 63.7 36.4 2.8 17.2 9.2 5.2. 1 5 SPEED ( RPM ) SPEED ( RPM ) M o d e l 82 7 6-1 A 2 2 5 4 5 6 7 5 82 7 6-2 A 1 1 2 2 2 4 3 3 6 82 7 6-3 A 9 7 1 9 4 2 9 1 82 7 6-4 A 5 2 1 4 1 5 6 82 7 6-5 A * 3 2 64 9 6 82 7 6-6 A * 1 6 32 4 8 * N O T E : Maximum torque recommended for p l a n e t a r y g e a r s y s t e m o n t hese models r e q u i r e s s h e a r k e y w i th 15 ft. / lbs. s h e a r s t r e n g t h. M o d e l 8 2 7 4 - A 2 5 5 51 7 6 5 8 2 7 4-1 A 1 5 3 3 6 4 5 9 8 2 7 4-2 A 7 8 15 6 2 3 4 8 2 7 4-3 A 6 3 12 6 1 8 9 8 2 7 4-4 A 3 8 76 1 1 4 8 2 7 4-5 A * 2 1 42 63 8 2 7 4-6 A * 1 1 22 33 * N O T E : Maximum torque recommended for p l a n e t a r y g e a r s y s t e m o n t hese models r e q u i r e s s h e a r k e y w i th 15 ft. / lbs. s h e a r s t r e n g t h. 37892-1

KEY 3/16" SQ. x 7/8" (4.76mm SQ. x 22.mm) 1.75" +.1" (44.45mm +.25mm) DIA 1-3/4" (45.mm) 1-3/8" (35.mm) 1/8" + 1/64" (3.17mm +.4mm) A B 3/4" (19.mm) 1-1/8" (28.575mm) 1-1/8" (28.575mm) 5/16-18 UNC-2B 2 HOLES 5/8" (16.mm) DEEP 2-1/32" (52.mm) DIA 1/2" (13.mm).625".5" (15.875mm.127mm) DIA 1/2" (13.mm) SHAFT RADIAL LOAD 43/64" (17.mm) 1-13/32" (36.mm) 1-13/32" (36.mm) 2-13/16" (71.mm) DIA OPTIONAL 3/4" NPT PIPED-AWAY EXHAUST (36 ROTATABLE) 2-5/16" (59.mm) DIA 1-5/8" (41.mm) DIA 1-15/16" (49.mm) 2." (51.mm) REVERSE INLET 9/16" (14.mm) 3/8" NPT INLETS FORWARD INLET SERIES 1841 NON-REVERSIBLE (Forward Rotation Shown) SERIES 1841 REVERSIBLE A B Models in. mm in. mm 181N, 1841N 9 7 16 24 6 15 16 176 181P, 181Q, 181U, 1 13 16 275 8 5 16 211 181W, 1841P, 1841Q, 1841U, 1841W Furnished with Cataloged Models Extra Options 2 H o l e F a c e M o u n t i n g R181 - A123 Exhaust D e f l e c t o r A s s e m b l y w i t h 3 4" Pipe Tap *To order Motor with Square Drive Shaft, add the suffix 2 to the Model Number. Example: 1841Q2. * 1 2" Square Drive Shaft on Gear Ratios: P, Q, U Shaft Extension 1.19" (3.23mm)

A 5/16-18 UNC-2B 6 HOLES 7/16" (11.mm) DEEP 1-1/8" R (28.575mm) KEY 3/16" SQ. x 1-1/2" (4.76mm SQ. x 38.mm) 2-3/16" (56.mm 1-25/32" (45.mm C B 3-1/4" (83.mm) DIA 1-5/8" (41.mm) DIA 1-11/16" (43.mm) OPTIONAL 3/4" NPT PIPED-AWAY EXHAUST (36 ROTATABLE) 7/8" (22.mm) 2-3/8" (6.mm) 3-5/8" (92.mm) DIA 2-3/4" (7.mm) DIA 1/2" NPT INLET 6 6 7/8" (22.mm) 1.75" +.1" (44.45mm +.254mm) SHAFT RADIAL LOAD 1/8" + 1/64" (3.17mm +.4mm) 2-11/16" (68.mm) DIA 1/2" NPT INLET REVERSE INLET 1/2" NPT INLETS FORWARD INLET.75".5" (19.5mm.127mm) DIA 1/2" (13.mm) 21/32" (17.mm) 21/32" (17.mm) SERIES 38 NON-REVERSIBLE SERIES 384 REVERSIBLE MODELS A B C in. mm in. mm in. mm 38M, 384M 1 1 16 256 7 178 1 1 16 27 38P, 38Q, 38R, 11 3 4 299 8 11 16 221 2 3 16 56 38S, 38U 384P, 384Q, 384R, 384S, 384U Furnished with Cataloged Models Extra Options 6 H o l e F a c e M o u n t i n g R38 - A123 Exhaust D e f l e c t o r A s s e m b l y w i t h 3 4" Pipe Tap * 5 8" Square Drive Shaft Shaft Extension 1.25" (31.75mm) *To order Motor with Square Drive Shaft, add the suffix 2 to the Model Number. Example: 384Q2.

NON-REVERSIBLE - 2. H.P. REVERSIBLE - 1.9 H.P. *Requires installation for reversible motors - shown on page 88. 2 126. 72. 42. 18. 1.2 2.64 84. 48. 28. 12. 6.8 1.76 TORQUE (LB. FT.) 1. 6 1. 2. 8 POWER (HP) 42. 24. 14. 6. 3.4.88. 4 SPEED ( RPM ) M o d e l 8211-A 82-A 4,5 9, 13,5 821-A 821-A 1,125 2,25 3,375 829-A 822-A 639 1,278 1,917 828-A 288 576 864 827-A 824-A 16 32 48 826-A 825-A 88 176 264 37892-1 FOOT BRACKET

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. 48D 3.8 2.83 525 985 5.8 7.8 7.7 1.4 98 2.77 15 1 4 6.92 48K 3.7 2.76 821 1538 35.3 47.8 47 63.7 95 2.69 15 1 4 6.92 48M 3.7 2.76 56 15 51 69.2 69 93.6 95 2.69 15 1 4 6.92 48N 3.7 2.76 387 726 75 12 1 136 95 2.69 15 1 4 6.92 48P 3.5 2.61 26 51 98 133 131 178 95 2.69 19 3 4 8.96 48Q 3.5 2.61 194 375 129 175 173 235 95 2.69 19 3 4 8.96 48S 3.5 2.61 146 275 178 241 238 323 95 2.69 19 3 4 8.96 48U 3.5 2.61 97 185 265 359 354 48 95 2.69 19 3 4 8.96 Reversible 484D 3.3 2.46 455 91 5.2 7. 6.9 9.4 95 2.69 15 1 4 6.92 484K 3.2 2.39 711 1429 32 43.4 42.7 57.9 95 2.69 15 1 4 6.92 484M 3.2 2.39 485 975 47.3 64. 63. 85.4 95 2.69 15 1 4 6.92 484N 3.2 2.39 336 675 67.7 91.7 9.2 122 95 2.69 15 1 4 6.92 484P 3 2.24 228 475 93 126 125 17 95 2.69 2 1 8 9.13 484Q 3 2.24 167 35 123 167 165 224 95 2.69 2 1 8 9.13 484S 3 2.24 125 255 161 218 215 292 95 2.69 2 1 8 9.13 484U 3 2.24 83 17 225 35 3 47 95 2.69 2 1 8 9.13 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. W 24 W 24 127.1 254.2 381.3 85.4 17.8 256.2 186.3 124.2 62.1 141 94 47 15 7 35 W.) 74.4 49.6 24.8 51 34 17 8.1 5.4 2.7 18 12 6 365 73 195 3.9 T..) AIR CO S MPTIO 9 PS 7 PSI 9 PSI 7 PSI T 9 PSI 7 PSI B A A 144 96 48 2.6 1.3 PO 17 214 321 76.5 153 229.5 176.1 117.4 58.7 133.5 89 44.5 94.5 63 31.5 W.) 69.3 46.2 23.1 47.4 31.6 15.8 7.5 5. 2.5 18 12 6 339 678 117 3.3 T..) 7 PSI 9 PSI 7 PSI T 7 PSI B A 144 96 48 2.2 1.1 PO 48K 48M 48P 48Q 3325 665 535 365 25 17 73 5 9975 165 195 75 177 354 531 13 26 39 48S 96 192 288 64 128 192 484K 484M 484P 484Q 389 6178 497 339 233 994 678 466 9267 1491 117 699 165 33 495 122 244 366 484S 89 178 267 59 118 177

5/16-18 UNC-2B 6 HOLES 7/16" (11.mm) DEEP KEY 1/4" SQ. x 1-5/8" (6.35mm SQ. x 41.mm) 1-1/2" R (38.1mm) 2-1/4" (57.mm) C 1/8" + 1/64" (3.17mm +.4mm) A B TOP DETAIL SHOWN BELOW OPTIONAL 1" NPT PIPED-AWAY EXHAUST (36 ROTATABLE) 1/8" (3.mm) 1-15/16" (49.mm) 7/8" (22.mm) 2-7/8" (73.mm) 3.5".15" (88.9mm.381mm) DIA 4-3/8" (111mm) DIA 4." (12mm) DIA 6 6 1." DIA.3" (25.4mm.76mm) 1." (25.mm) SHAFT RADIAL LOAD 2.5" +.1" (63.5mm +.254mm) DIA 1/2" NPT INLETS 1/2" NPT INLET 3/4" (19.mm) REVERSE INLET FORWARD INLET 1-3/4" (44.5mm) 1/2" NPT REVERSE INLET 1-1/2" (38.mm) 1/2" NPT FORWARD INLET OPTIONAL SIDE INLET BACK HEAD (MOTOR CAN BE ROTATED 12 EITHER DIRECTION TO RELOCATE INLET PORTS) SERIES 48 NON-REVERSIBLE 11/16" (18.mm) SERIES 484 REVERSIBLE 11/16" (18.mm) MODELS A B C in. mm in. mm in. mm 48D, 48K, 48M, 48N 12 1 8 38 9 229 29 32 23 484D, 484K, 484M, 484N 48P, 48Q, 48S, 48U 14 1 2 368 11 3 8 289 2 7 8 73 484P, 484Q, 484S, 484U UP TOP DETAIL ASSEMBLE TO APPLICATION IN "UP" ORIENTATION FOR BEST STARTING CAPABILITY Furnished with Cataloged Models 6 H o l e F a c e M o u n t i n g Extra Options R48 - A123 Exhaust D e f l e c t o r A s s e m b l y with 1 " P i p e T a p ** R491-12 Side Inlet Backhead Requires (3) 518-14 Screws *To order Motor with Square Drive Shaft, add the suffix 2 to the Model Number. Example: 484Q2. **Contact Ingersoll Rand for Model Number with these options. * 5 8" Square Drive Shaft on Gear Ratio: M Shaft Extension 1.38" (35.5mm) * 3 4" Square Drive Shaft on Gear Ratios: P, Q, S, U Shaft Extension 1.47" (37.44mm)

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 17RA5 2.3 1.72 562 111 24 32.5 37 5.2 13 2.92 4 18.1 17RA8 2.3 1.72 383 76 35 47.5 54.5 73.9 13 2.92 4 18.1 17RA11 2.3 1.72 254 55 53 71.9 82 111 13 2.92 4 18.1 17RA14 2.3 1.72 21 4 67 91 14 141 13 2.92 4 18.1 17RA17 2.3 1.72 169 335 8 19 124 168 13 2.92 4 18.1 17RA22 2.3 1.72 129 255 15 142 163 221 13 2.92 4 18.1 17RB29 2.2 1.64 97 187 12 163 21 273 1 2.83 72 32.7 17RB36 2.2 1.64 79 152 148 21 248 336 1 2.83 72 32.7 17RB45 2.2 1.64 62 121 187 254 312 423 1 2.83 72 32.7 17RB78 2.2 1.64 36 69 327 443 545 739 1 2.83 72 32.7 34RA5 4.1 3.6 56 18 41 6 69 93.6 183 5.18 43 19.5 34RA8 4.1 3.6 385 74 65 88 11 137 183 5.18 43 19.5 34RA11 4.1 3.6 255 49 98 133 152 26 183 5.18 43 19.5 34RA14 4.1 3.6 21 39 124 168 192 26 183 5.18 43 19.5 34RA17 4.1 3.6 168 325 148 21 229 311 183 5.18 43 19.5 34RA22 4.1 3.6 128 245 195 264 31 48 183 5.18 43 19.5 34RB29 4 2.98 99 187 224 34 374 57 18 5.1 75 34 34RB36 4 2.98 8 152 277 376 462 627 18 5.1 75 34 34RB45 4 2.98 63 121 348 472 581 788 18 5.1 75 34 34RB78 4 2.98 36 69 66 822 11 137 18 5.1 75 34 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. W 6 345 4 23 B 273 222 182 148 18 12 138 92 A 117 9.3 78 6.2 T ) 6 4 2 4 6 27.2 4.8 TO.) 9 PSI 7 PSI 156 14 385 77 1155 2.4 9 PSI 7 PSI A 52 1.6.8 ) 1113 742 642 428 39 3.1 51 414 2 34 276 13.6 333 222 TO 6 252 46 168 213 168 142 112 W.) 91 74 114 76 75.9 2 115 5.6 6 4 2 375 75 1125 4.5 TO..) 9 PSI 7 PSI 9 PSI 7 PSI B A 3 2 1 3. 1.5 PO TOR 9 PSI 7 PSI 371 214 17 138 111 84 71 56 38 25.3 7 PSI 17RA5 17RA8 17RA11 17RA14 17RA17 17RA22 17RB29 17RB36 17RB45 17RB78 385 77 264 176 139 528 352 278 1155 792 528 417 117 234 351 89 178 267 65 53 13 16 195 159 42 84 126 24 48 72 34RA5 34RA8 34RA11 34RA14 34RA17 34RA22 34RB29 34RB36 34RB45 34RB78 375 75 257 17 135 514 34 27 1125 771 51 45 113 226 339 89 17 255 65 53 13 16 195 159 42 84 126 24 48 72

REVERSE INLET E D FORWARD INLET B C A 9/16" (14.mm) 7-19/32" (196.mm) 9/16" (14.mm) 1/8" (3.mm) 3/8" SQ. x 2." LONG KEY (1.mm SQ. x 51.mm) 2-11/16" (68.mm) 4.5".2" (114.3mm.51mm) DIA 2-1/2" (64.mm) 1.5".5" (38.1mm.13mm) DIA MOTOR CAN BE ROTATED IN INCREMENTS OF 9 TO CHANGE LOCATION OF INLET PORTS 5.732" (146.mm) 3-1/16" (78.mm) SERIES 17RB AND 34RB 2-1/2" (64.mm) 6-1/8" (156.mm) 9-11/32" (237.mm) SHAFT RADIAL LOAD 1." (25.4mm) SERIES A B C D E in. mm in. mm in. mm NPT in. mm 17RB 13 1 16 332 4 29 32 125 2 3 16 56 3 8" 7 8 22 34RB 14 13 16 376 6 21 32 169 2 9 32 58 1 2" 1 3 16 3 9/16" (14.mm) 4-7/32" (17.mm) 1/4" SQ. x 1-5/8" LONG KEY (6.mm SQ. x 41.mm) 3/8-16 TAP 12 HOLES 5/8" (16.mm) DEEP ON 5.875" (149.mm) DIA 3-13/16" (97.mm) 5-13/16" (148.mm) 1/8" (3.mm) 4.5".2" (114.3mm.51mm) DIA 45 3 3 45 1.".5" (25.4mm.13mm) DIA 1-1/2" (267.mm) 2-1/16" (52.mm) 4." (12.mm) 7/8" (22.mm) 2-1/4" (57.mm) 2-1/2" (64.mm) 5-3/8" (137.mm) 2-5/32" (55.mm) 13/16" (2.7mm) 11/16" 4 HOLES (18.mm) DIA 8." (23.mm) 4." (12.mm) 3/4" (19.mm) SERIES 17RA AND 34RA (MOTOR DIMENSIONS ARE SAME AS 17RB AND 34RB) SHAFT RADIAL LOAD FRONT END VIEW ALL SERIES

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 48RA5 3.1 2.31 93 169 26 35.3 35 47.5 95 2.69 44 2 48RA8 3.1 2.31 638 116 38 51.5 51.5 69.8 95 2.69 44 2 48RA11 3.1 2.31 423 772 57 77.3 77.5 15 95 2.69 44 2 48RA14 3.1 2.31 332 612 72 97.6 98 133 95 2.69 44 2 48RA17 3.1 2.31 278 511 86 117 117 159 95 2.69 44 2 48RA22 3.1 2.31 213 39 113 153 154 29 95 2.69 44 2 48RB29 3 2.24 162 292 135 183 189 256 9 2.55 75 34 48RB36 3 2.24 131 236 167 227 234 317 9 2.55 75 34 48RB45 3 2.24 15 188 29 283 295 4 9 2.55 75 34 48RB78 3 2.24 6 18 364 494 513 696 9 2.55 75 34 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. W 567 378 327 218 258 172 21 14 W.) 6 4 2 114 171 86 129 72 18 57 85.5 37.8 56.7 25.8 38.7 TO..) 9 PSI B 15 1 43 86 129 3.36 9 PSI 7 PSI A 5 2.24 1.12 PO Furnished with Cataloged Models Side Inlet Backhead Standard Options R484-12 Rear Inlet Backhead 189 19 86 7 57 43 36 28.5 18.9 12.9 TO 7 PS 48RA5 48RA8 48RA11 48RA14 48RA17 48RA22 48RB29 48RB36 48RB45 48RB78 586 1172 43 268 213 86 536 426 1758 129 84 639 178 356 534 136 272 48 12 82 24 164 36 246 66 132 198 38 76 114

15-7/8" (43.mm) 1-3/4" (44.5mm) 1/2" NPT REVERSE INLET 1-1/2" (38.mm) 1." (25.44mm) 1/2" NPT FORWARD INLET REAR INLET BACK HEAD 7-23/32" (196.mm) 4-3/8" 111.mm) DIA 4." (12.mm) DIA 2-7/8" (73.mm) 9/16" (14.mm) 7-19/32" (193.mm) 9/16" (14.mm) KEY 3/8" SQ. x 2." LONG (1.mm SQ. x 51.mm) 1/8" (3.mm) 4.5" DIA.2" (114.3mm.51mm) SIDE INLET BACK HEAD (MOTOR CAN BE ROTATED 12 EITHER DIRECTION TO RELOCATE INLET PORTS) 3/4" (19.mm) 2-3/16" (55.5mm) 2." (51.mm) DIA 5.732" (146.mm) 3-1/16" (78.mm) 1.5" DIA.5" (38.1mm.13mm) 1." (25.4mm) 1/2" NPT REVERSE INLET 1-1/2" (38.mm) OPTIONAL REAR INLET BACK HEAD 1/2" NPT FORWARD INLET OPTIONAL 1." NPT PIPED-AWAY EXHAUST (36 ROTATABLE) 2-1/2" (64.mm) 6-1/8" (156.mm) 9-11/32" (237.mm) SERIES 48RB SHAFT RADIAL LOAD 9/16" (14.mm) 4-7/32" (17.mm) KEY 1/4" SQ. x 1-5/8" LONG (6.mm SQ. x 41.mm) 3/8-16 TAP 12 HOLES 5/8" (16.mm) DEEP ON 5.875" (149.mm) DIA 3-13/16" (97.mm) 5-13/16" (148.mm) 1/8" (3.mm) 4.5".2" (114.3mm.51mm) DIA 45 3 3 45 1.".5" (25.4mm.13mm) DIA 1-1/2" (267.mm) 2-1/16" (52.mm) 4." (12.mm) 7/8" (22.mm) 2-1/4" (57.mm) 2-1/2" (64.mm) 5-3/8" (137.mm) 2-5/32" (55.mm) SERIES 48RA (MOTOR DIMENSIONS ARE SAME AS 48RB) SHAFT RADIAL LOAD 13/16" (2.7mm) 11/16" 4 HOLES (18.mm) DIA 8." (23.mm) FRONT END VIEW ALL SERIES 4." (12.mm) 3/4" (19.mm)

7 PS Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 92RA5 8.15 6.8 91 139 56 75.9 75 12 23 6.51 46 2.9 92RA8 8.15 6.8 62 1296 8 19 19 148 23 6.51 46 2.9 92RA11 8.15 6.8 415 852 12 163 164.5 223 23 6.51 46 2.9 92RA14 8.15 6.8 327 682 152 26 28 282 23 6.51 46 2.9 92RA17 8.15 6.8 274 571 18 244 248 336 23 6.51 46 2.9 92RA22 8.15 6.8 29 435 235 319 326 442 23 6.51 46 2.9 92RB29 7.9 5.89 16 327 28 38 42 545 225 6.37 78 35.4 92RB36 7.9 5.89 13 264 345 468 497 674 225 6.37 78 35.4 92RB45 7.9 5.89 13 21 44 597 626 849 225 6.37 78 35.4 92RB78 7.9 5.89 59 12 77 144 19 1478 225 6.37 78 35.4 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. W 1191 794 69 46 543 362 441 294 W.) 6 4 2 24 36 18 27 152 228 12 18 8 12 54 81 TO..) 9 PSI 7 PSI B 39 26 13 3 6 9 8.7 TOR A 7 PSI P 9 PS 5.8 2.9 PO 12 9 76 6 4 27 397 23 181 147 92RA5 92RA8 92RA11 92RA14 92RA17 92RA22 92RB29 92RB36 92RB45 92RB78 656 1312 45 3 237 9 6 474 1968 135 9 711 198 396 594 151 32 453 114 92 228 184 342 276 73 146 219 42 84 126

1." NPT REVERSE INLET 1-1/4" (32.mm) 1." NPT FORWARD INLET 1-1/4" (32.mm) 7-1/16" (179.mm) 3-5/32" (8.mm) 15-7/32" (386.mm) 9/16" (14.mm) 7-19/32" (193.mm) 9/16" (14.mm) KEY 3/8" SQ. x 2." LONG (1.mm SQ. x 51.mm) 1/8" (3.mm) 4.5".2" (114.3mm.51mm) DIA PILOT 3-9/16" (9.mm) 3-1/4" (82.mm) 5.732" (146.mm) 3-1/16" (78.mm) 1-1/4" NPT EXHAUST MOTOR END VIEW 1-1/8" (29.mm) NOTE: INLET AND EXHAUST PORTS CAN BE RELOCATED RELATIVE TO EACH OTHER IN INCREMENTS OF 9 3-1/4" (82.mm) 2-1/2" (64.mm) 9-11/32" (237.mm) SERIES 92RB 6-1/8" (156.mm) 1." (25.4mm) SHAFT RADIAL LOAD 1.5".5" (38.1mm.13mm) DIA 9/16" (14.mm) 4-7/32" (17.mm) 3/8-16 TAP 12 HOLES 5/8" (16.mm) DEEP ON 5.875" (149.mm) DIA 3-13/16" (97.mm) 5-13/16" (148.mm) KEY 1/4" SQ. x 1-5/8" LONG (6.mm SQ. x 41.mm) 1/8" (3.mm) 4.5".2" (114.3mm.51mm) DIA 45 3 3 45 1.".5" (25.4mm.13mm) DIA 1-1/2" (267.mm) 2-1/16" (52.mm) 4." (12.mm) 7/8" (22.mm) 2-1/4" (57.mm) 2-1/2" (64.mm) 5-3/8" (137.mm) 2-5/32" (55.mm) 13/16" (2.7mm) 11/16" 4 HOLES (18.mm) DIA 8." (23.mm) 4." (12.mm) 3/4" (19.mm) SERIES 92RA (MOTOR DIMENSIONS ARE SAME AS 92RB) SHAFT RADIAL LOAD FRONT END VIEW ALL SERIES

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Non-Reversible Direction of rotation is counterclockwise when facing the shaft. 92RM1 9.9 7.38 295 398 33 44.7 45 61 24 6.79 24 1 4 11 92RM2 9.9 7.38 295 398 33 44.7 45 61 24 6.79 24 1 4 11 Reversible 992RM1 8.15 6.8 173 36 28.7 38.9 39 52.9 23 6.51 25 1 4 11.3 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. Direction of rotation of Model 92RM1 is clockwise, and of Model 92RM2 is counter clockwise when facing the shaft end of the motor. MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 6 4 2 32.4 48.6 32.4 48.6 TORQUE (LB. FT.) 16.2 16.2 MAXIMUM ALLOWABLE SPEED AIR CONSUMPTION 9 PSIG LOAD 7 PSIG 399 266 133 1396 2792 4188 SPEED FOR DETERMINING SHAFT RADIAL LOAD 1.8 TORQUE 9 PSIG 7 PSIG HP 7 PSIG HP 9 PSIG 7.2 3.6 POWER (HP) AIR CONSUMPTION (SCFM) MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 6 4 2 13.9 27.8 41.7 TORQUE (LB. FT.) MAXIMUM ALLOWABLE SPEED 39 26 13 1248 2496 3744 SPEED FOR DETERMINING SHAFT RADIAL LOAD 8.7 TORQUE 9 PSIG 7 PSIG HP 7 PSIG AIR CONSUMPTION 9 PSIG HP 9 PSIG 7 PSIG LOAD 5.8 2.9 POWER (HP) AIR CONSUMPTION (SCFM) MODEL 92RM1 92RM2 SPEED (RPM) 1396 2792 4188 1396 2792 4188 MODEL SPEED (RPM) 992RM1 1248 2496 3744

1." NPT AIR INLET NOTE: INLET AND EXHAUST PORTS CAN BE RELOCATED RELATIVE TO EACH OTHER IN INCREMENTS OF 9 9-5/16" (237.mm) REVERSIBLE 9-3/16" (233.mm) NON-REVERSIBLE 3-5/32" (8.mm) 2-15/32" (63.mm) KEY 1/4" SQ. x 1-5/8" (6.35mm SQ. x 41.28mm) 2-1/4" (57.mm) DIA 2-1/4" (57.mm) 3-9/16" (91.mm) 1/8" (3.mm) 2-5/16" (59.mm).875" -.5" (22.23mm -.13mm) DIA 13/16" (21.mm) 1." NPT AIR INLET FOR COUNTER- CLOCKWISE SHAFT ROTATION 1-1/4" (32.mm) 1." NPT AIR INLET FOR CLOCKWISE SHAFT ROTATION 8-11/16" (221.mm) 3-1/4" (83.mm) 1-63/64" (5.mm) 3-1/4" (83.mm) 1-1/4" NPT EXHAUST 2-9/32" (58.mm) 4-15/16" (125.mm) 1/4" (6.mm) SHAFT RADIAL LOAD 7/8" (22.mm) 6-7/8" (175.mm) DIA 5-1/4" (133.mm) DIA 1/4-2 UNC-3B 18 HOLES 3/8" (1.mm) DEEP 2 4.718" ±.5" (119.84mm ±.127mm) DIA 4.374".1" (111.1mm.25mm) DIA

Air S p e e d a t C o n s u m p t i o n Model* Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. A suffix denotes foot mount model, B suffix denotes flange mount models. * Reversible MVA17A 1.93 1.44 28 545 4.5 6.1 7 9.5 76 2.15 12 1 2 5.67 MVA17B 1.93 1.44 28 545 4.5 6.1 7 9.5 76 2.15 12 1 2 5.67 MVA34A 4.15 3.9 3 625 8.3 11.3 12.8 17.4 181 5.12 16 1 2 7.48 MVA34B 4.15 3.9 3 625 8.3 11.3 12.8 17.4 181 5.12 16 1 2 7.48 MOV5AA.75.56 33 68 1.65 2.2 2.2 2.98 3.84 6 1 2 2.95 MOV75AA 1.5 7.8 26 56 22.5 3.5 3 4.7 26 7.36 64 29 MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 7.8 2.6 5.2 24 16 8 TORQUE (LB. FT.) MAXIMUM ALLOWABLE SPEED 1893 3786 5679 SPEED FOR DETERMINING SHAFT RADIAL LOAD TORQUE 9 PSIG 7 PSIG AIR CONSUMPTION 9 PSIG HP 9 PSIG HP 7 PSIG 7 PSIG LOAD 117 78 39 2.1 1.4.7 POWER (HP) AIR CONSUMPTION (SCFM) MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 4.48 8.96 13.44 24 16 8 TORQUE (LB. FT.) MAXIMUM ALLOWABLE SPEED AIR CONSUMPTION 9 PSIG 217 434 651 SPEED FOR DETERMINING SHAFT RADIAL LOAD HP 9 PSIG HP 7 PSIG TORQUE 9 PSIG 7 PSIG 7 PSIG LOAD 315 21 15 4.35 2.9 1.45 POWER (HP) AIR CONSUMPTION (SCFM) MODEL SPEED (RPM) MVA17 1893 3786 5679 MODEL SPEED (RPM) MVA34 217 434 651

MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.).79 1.58 2.37 15 1 5 TORQUE (LB. FT.) MAXIMUM ALLOWABLE SPEED AIR CONSUMPTION 9 PSIG 7 PSIG 2361 4722 783 SPEED FOR DETERMINING SHAFT RADIAL LOAD.81 HP 9 PSIG HP 7 PSIG TORQUE 9 PSIG 7 PSIG LOAD 51 34 17.54.27 POWER (HP) AIR CONSUMPTION (SCFM) MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 1.8 21.6 32.4 45 3 15 1945 389 5835 SPEED FOR DETERMINING SHAFT RADIAL LOAD 11.25 HP TORQUE (LB. FT.) MAXIMUM ALLOWABLE SPEED AIR CONSUMPTION 9 PSIG 7 PSIG LOAD 9 PSIG HP 7 PSIG TORQUE 9 PSIG 7 PSIG 315 21 15 7.5 3.75 POWER (HP) AIR CONSUMPTION (SCFM) MODEL SPEED (RPM) MOV5 2361 4722 783 E C (2 INLETS) A D 1/8" (3.mm) 2-1/16" (52.mm) 5/8" (16.mm) 5-7/8" (149.mm) DIA KEY 3/16" SQ. x 1-1/4" (4.76mm SQ. x 31.75mm) MODEL SPEED (RPM) MOV75 1945 389 5835 45 TYP. FORWARD INLET B B REVERSE INLET 3/8-16 UNC-2B 4 HOLES-THRU 4.5" 4.498" (114.3mm) (114.25mm) DIA F SHAFT RADIAL LOAD 3-1/2" (89.mm) 2." (51.mm) 2." (51.mm) OPTIONAL MOUNTING BASE USED ON A MODELS ONLY 1." (25.mm) 11/32" x 1-3/32" SLOTS (9.mm x 28.mm) 4 PLACES 1-11/16" (43.mm) 2-1/2" (64.mm) 1-11/16" (43.mm) 5." (127.mm) 1/4" (6.mm) SERIES A B C D E F DIA. in. mm in. mm NPT in. mm in. mm in. mm MVA17 6 11 16 17 7 8 22 3 8" 1 7 8 48 2 1 2 64.625 15.88.6245 15.86 MVA34 8 7 16 214 1 3 16 3 1 2" 2 51 2 5 8 67.875 22.23.8745 22.21

3/8" (9.5mm) 4-11/16" (119.mm) DIA 1-11/32" (34.mm) 2-27/32" (72.mm) 1-29/32" (48.mm) 5/8" (16.mm) 2.999".1" (76.175mm.25mm) DIA FORWARD INLET 3/4" (19.mm) 1/4" NPT INLET REVERSE INLET 3/4" (19.mm) 1/4" NPT INLET 3/8-16 UNC-2B 4 HOLES-17/32" (13.5mm) DEEP KEY 3/16" SQ. x 1-1/4" (4.76mm SQ. x 32.mm) 45 45 4.5".2" (114.3mm.51mm) DIA 3.875" (98.4mm) DIA 3-1/8" (79.mm) 7/8" (REF) (22.mm) 1-3/8" (35.mm) SHAFT RADIAL LOAD 3-3/4" (95.mm) 9/32" (7.mm) 1-1/2" (38.mm) 9/32" 4 HOLES (7.mm) DIA.625".1" (15.875mm.25mm) DIA 3/4" (19.mm) 1-1/2" (38.mm)

KEY 5/16" SQ. x 2-3/4" (7.94mm SQ. x 7.mm) 3 2-7/8" (73.mm) 6-1/2" (165mm) 1." (254.mm).375" (9.5mm) 39/64" (16.mm) 1-3/8" (35.mm) 5." (127.mm) 1-1/4" (32.mm) 1-1/4" NPT INLET FORWARD INLET REVERSE INLET 1-1/4" (32.mm) 1-1/4" NPT INLET 6 5/32" (4.mm) 3-1/2" (89.mm) 3.875" (98.43mm) DIA 8." (23.mm) DIA 9-7/8" (251.mm) 3.998".2" (11.55mm.51mm) DIA 5-1/4" (133.mm) DIA 3/8-16 UNC-2B 6 HOLES 1/2" (13.mm) DEEP 5-7/8" (149.mm) 1-1/4" (32.mm) SHAFT RADIAL LOAD 1-1/4" NPT EXHAUST 1.375".1" (34.93mm.25mm) DIA 7-3/4" (197.mm) 6-1/2" (165.mm) 2-3/8" (6.mm) 1/2" (13.mm) 4." (12.mm) 5-1/4" (133.mm) 7/16" HOLES (11.mm) DIA Models MVA17A MVA17B MVA34A MVA34B MOV5AA Furnished with Cataloged Models *Foot Mounting NEMA C Face 56C Frame Size **Foot Mounting NEMA C Face 182C Frame Size Foot/4 Hole Face Mounting Standard Options MVA8-K4 Mounting Foot Kit MOV1AA-674 Muffler MVA8-K4 Mounting Foot Kit MOV1AA-674 Muffler MRV15-AC 98 Muffler MOV75AA Foot/6 Hole Face Mounting 15BM-A674 Muffler * Removal of Foot Mounting results in Motor having NEMA C Face Mounting, 56C Frame Size. ** Removal of Foot Mounting results in Motor having NEMA C Face Mounting, 182C Frame Size.

Max Power Speed at Free Starting Stall Air Consumption Max Power Speed Torque Torque at Max. Power Weight Series hp kw rpm rpm lb.-ft. Nm lb.-ft. Nm scfm m 3 /m lb. kg reversible SM1AMA.33.25 76 15,2.29.39.38.52 17.5 1.5.7 SM1AMAL.33.25 76 15,2.29.39.38.52 17.5 1.5.7 SM1UPC.6.37 6 12,5.45.6.6.81 42 1.2 1.75.8 SM1UPCL.6.37 6 12,5.45.6.6.81 42 1.2 1.75.8 SM1UPCR.6.37 6 12,5.45.6.6.81 42 1.2 1.75.8 SM2AMAN.88.66 3 87 1.7 2.3 2.3 3.1 48 1.4 7.5 3.4 SM2AMC.88.66 3 87 1.7 2.3 2.3 3.1 48 1.4 7.5 3.4 SM4AMAN 1.5 1.1 3 79 2.6 3.5 4.1 5.6 67 1.9 8.25 3.7 SM4AMB 1.5 1.1 3 79 2.6 3.5 4.1 5.6 67 1.9 8.25 3.7 SM6AMA 3.6 2.7 3 79 5.3 7.2 8.7 11.8 12 3.4 16.25 7.4 SM6AMAN 3.6 2.7 3 79 5.3 7.2 8.7 11.8 12 3.4 16.25 7.4 SM8AMA 4.8 3.6 25 7 1 13.6 14 19 152 4.3 22.5 1.2 SM8AMAN 4.8 3.6 25 7 1 13.6 14 19 152 4.3 22.5 1.2 SM 2AM A N Select Series Air Motor Power Series S h a f t / I n t e r f a c e R o t a t i o n M o u n t i n g 1AM A = Round shaft w/ square key L=Left Hand Bias (CCW)* N=NEMA mount 1UP (Round shaft on SM1AM series) R=Right Hand Bias (CW)* None= Face or Footmount 2AM B = Round shaft with Woodruff Key (#3) None=Reversible (Footmount is an optional 4AM C = Round shaft with flat on the shaft *when facing shaft accessory) 6AM 8AM Series Furnished with Cataloged Models Optional Accessories S M 1 A M S M 1 U P S M 2 A M S M 4 A M S M 6 A M S M 8 A M Hub Mounting Muffler Hub Mounting Muffler 3 H o l e F a c e M o u n t i n g Muffler NEMA 56C Flange with Model SM2AMAN 3 H o l e F a c e M o u n t i n g Muffler NEMA 56C Flange with Model SM4AMAN 3 H o l e F a c e M o u n t i n g Muffler NEMA 56C Flange with Model SM6AMAN 4 H o l e F a c e M o u n t i n g M u f f l e r NEMA 182C Flange, 184C Flange Mount with Model SM8AMAN S M 1 A M - A G 5 8 7 F o o t m o u n t S M 1 A M - A G 5 8 7 F o o t m o u n t S M 2 A M - A H 6 3 6 F o o t m o u n t S M 4 A M - A H 6 3 4 F o o t m o u n t S M 6 A M - A H 6 3 4 F o o t m o u n t S M 8 A M - A H 6 4 F o o t m o u n t

GAST FENNER IR SELECT Series Max. Max. Free Model Rotation Model Model Style Power Speed Mounting Style Bias Style (w/ Foot Bracket) (hp) (rpm) Style 1AM-NCC-12 Left Hand (CCW) SM1AMAL.33 15,2 Hub Mount 1AM-NCW-14 Right Hand (CW) SM1AMA.33 15,2 Hub Mount 1AM-NRV-39A Reversible SM1AMA.33 15,2 Hub Mount 1AM-NRV-63A Reversible SM1AMA.33 15,2 Hub Mount 1UP-NCC-1A Left Hand (CCW) SM1UPCL.6 12,5 Hub Mount 1UP-NCW-2A Right Hand (CW) SM1UPCR.6 12,5 Hub Mount 1UP-NRV-3A Reversible V1X SM1UPC.6 12,5 Hub Mount 1UP-NRV-1 Reversible SM1UPC.6 12,5 Hub Mount AG585 1AM Foot Mount (SM1AM-AG587) Bracket 2AM-NCC-16 Left Hand (CCW) 2VMX/CCW SM2AMC.88 8,7 Hub or Face Mount 2AM-NCC-16F Left Hand (CCW) SM2AMC.88 8,7 Hub or Face Mount 2AM-NCW-7A Right Hand (CW) 2VMX/CW SM2AMC.88 8,7 Hub or Face Mount 2AM-NCW-7B Right Hand (CW) SM2AMC.88 8,7 Hub or Face Mount 2AM-NRV-89 Reversible VA2X SM2AMC.88 8,7 Hub or Face Mount 2AM-FCC-1 Left Hand (CCW) 2VMJ/CCW SM2AMC (w/ SM2AM-AH636).88 8,7 Foot Mount 2AM-FCW-13 Right Hand (CW) 2VMJ/CW SM2AMC (w/ SM2AM-AH636).88 8,7 Foot Mount 2AM-FRV-51 Reversible VA2J SM2AMC (w/ SM2AM-AH636).88 8,7 Foot Mount 2AM-NCC-43A Left Hand (CCW) 2VMC/CCW SM2AMAN.88 8,7 NEMA 56C Mount Right Hand (CW) 2VMC/CW SM2AMAN.88 8,7 NEMA 56C Mount 2AM-NRV-9 Reversible VA2C SM2AMAN.88 8,7 NEMA 56C Mount Left Hand (CCW) 4VMX/CCW SM4AMB 1.5 7,9 Hub or Face Mount Right Hand (CW) 4VMX/CW SM4AMB 1.5 7,9 Hub or Face Mount 4AM-NRV-22B Reversible VA4X SM4AMB 1.5 7,9 Hub or Face Mount 4AM-NRV-22F Reversible SM4AMB 1.5 7,9 Hub or Face Mount 4AM-NRV-54A Reversible SM4AMB 1.5 7,9 Hub or Face Mount Left Hand (CCW) 4VMJ/CCW SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount Right Hand (CW) 4VMJ/CW SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount 4AM-FRV-13C Foot Mount VA4J SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount 4AM-FRV-13H Foot Mount SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount 4AM-FRV-63A Foot Mount SM4AMB (w/ SM4AM-AH634) 1.5 7,9 Foot Mount Left Hand (CCW) 4VMC/CCW SM4AMAN 1.5 7,9 NEMA 56C Mount Right Hand (CW) 4VMC/CW SM4AMAN 1.5 7,9 NEMA 56C Mount 4AM-NRV-5C Reversible VA4C SM4AMAN 1.5 7,9 NEMA 56C Mount 4AM-NRV-7C Reversible SM4AMAN 1.5 7,9 NEMA 56C Mount 6AM-NRV-7A Reversible VA6X SM6AMA 3.6 7,9 Face Mount 6AM-FRV-5A Reversible VA6J SM6AMA (w/ SM6AM-AH634) 3.6 7,9 Foot Mount 6AM-FRV-23A Reversible SM6AMA (w/ SM6AM-AH634) 3.6 7,9 Foot Mount 6AM-NRV-11A Reversible VA6C SM6AMAN 3.6 7,9 NEMA 56C Mount 6AM-NRV-22A Reversible SM6AMAN 3.6 7,9 NEMA 56C Mount 8AM-NRV-5B Reversible VA8X SM8AMA 4.8 7, Face Mount 8AM-NRV-42A Reversible SM8AMA 4.8 7, Face Mount 8AM-FRV-2B Reversible VA8J SM8AMA (w/ SM8AM-AH64) 4.8 7, Foot Mount 8AM-FRV-3A Reversible SM8AMA (w/ SM8AM-AH64) 4.8 7, Foot Mount 8AM-NRV-28A Reversible VA8C SM8AMAN 4.8 7, NEMA 145TC Mount 8AM-NRV-32A Reversible SM8AMAN 4.8 7, NEMA 145TC Mount

1.73 [44.] MAXIMUM.87 [22.] 2X.1.8 [27.4] 1 8 NPT 3.16 [8.3] 4.41 [111.9] 1.25 [31.75].375 [9.52] 1.1 [28.] 2.45 [62.1] 4.18 [16.1] MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 6 4 2 ALLOWABLE SPEED LOAD AIR CONSUMPTION 9 PSIG 7 PSIG 52 14 156 3 2 1 AIR CONSUMPTION (SCFM) 2.52 [64.] 2X 45 2X ø.25 [6.4] SPEED FOR DETERMINING SHAFT RADIAL LOAD.36 HP 9 PSIG 2.81 [71.4] 4.91 [124.8] 1.75 [44.5] 1.58 [4.].1 [2.7].14.28.42 TORQUE (LB. FT.) HP 7 PSIG TORQUE 9 PSIG 7 PSIG.24.12 POWER (HP) 2X.22 [5.6] 1.5 [38.1].75 [19.] 2X 2.5 [63.5] 2X.28 [7.1] MODEL SPEED (RPM) SM1AM 52 14 156 2.44 [62.] 1.73 [44.].87 [22.] 1.8 [27.4] 1 2X 8 NPT 3.16 [8.3] 4.41.375 [9.52] [111.9] 1.25 [31.75].33 [8.4] 2X.54 [13.7] 1.14 [29.].81 [2.6] 2X 45.25 [6.4] 2.71 [68.7] 4.66 [118.3] MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 6 4 2 MAXIMUM ALLOWABLE SPEED LOAD AIR CONSUMPTION 9 PSIG SPEED FOR DETERMINING SHAFT RADIAL LOAD.36 HP 9 PSIG 7 PSIG 52 14 156 3 2 1 AIR CONSUMPTION (SCFM) 4.91 [124.8] 2.81 [71.4] 1.75 [44.5] 1.58 [4.].1 [2.7].22.44.68 TORQUE (LB. FT.) HP 7 PSIG TORQUE 9 PSIG 7 PSIG.24.12 POWER (HP) 2X.22 [5.6] 1.5 [38.1].75 [19.] 2X 2.5 [63.5] 2X.28 [7.1] MODEL SPEED (RPM) SM1UP 432 864 1296 2.44 [62.]

5.2 [127.4] 3X 2.5 [63.6] 1-2UNC - 2B THD 4 2x 15 2.5 [63.5] 1.25 [31.8] 2X 1 4 1.72 [43.7] NPT 3.29 [83.5] 5.53 [14.5] 1.75 [44.45].5 [12.71].63 [16.] 1.13 [28.7] 1. [25.4] 2.86 [72.5].45 [11.4] 4.49 [114.] 1.51 [38.4] 5. [127.] 6.87 [174.5] 3.5 [88.9].25 [6.4] 4x.28 [7.1] 1.5 [38.1] 2X 2.34 [59.5] 3. [76.2] 2X 3.28 [83.4] 3.75 [95.3] 4x.5 [12.7] ø 6.5 [165.] 2.6 [52.3] 1.41 [35.8].19 [4.8] SQ KEY 5.76 [146.2] 1.54 [39.].7 [17.8] 4.5 [114.3] 4X 3-16UNC - 2B THD 8 4X 9 45 ø 5.88 [149.4].625 [15.88].13 [3.3] SPEED FOR DETERMINING SHAFT RADIAL LOAD.96.8 1.6 2.4 TORQUE (LB. FT.) MODEL HP 7 PSIG TORQUE 9 PSIG 7 PSIG SPEED (RPM) HP 9 PSIG SM2AM 272 544 816.64.32 POWER (HP) MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 4 8 12 MAXIMUM ALLOWABLE SPEED MODEL LOAD SPEED (RPM) AIR CONSUMPTION 9 PSIG 7 PSIG SM2AM 272 544 816 6 4 2 AIR CONSUMPTION (SCFM)

3X 2.5 [63.6] 1-2UNC - 2B THD 4 2x 15 2.5 [63.5] 1.25 [31.8] 2X 1 4 1.72 [43.7] NPT 3.37 [85.6] 5.61 [142.6].63 [16.] 1.12 [28.4].5 [12.7] NUMBER 3 WOODRUFF KEYWAY.5 [12.71] 1.75 [44.45].56 [14.1] 5.81 [147.7] 3.25 [82.5] 4.49 [114.] 1.5 [38.] 5. [127.] 6.87 [174.5] 3.5 [88.9].25 [6.4] 4x.28 [7.1] 3. [76.2] 3.75 [95.3] 1.5 [38.1] 2X 2.53 [64.2] 2X 3.47 [88.2] 6.56 [166.7] 1.94 [49.3] 4x.5 [12.7] ø 6.5 [165.].7 [17.8] ø 5.88 [149.4] 4.5 [114.3] 2.6 [52.3] 1.41 [35.8].19 [4.8] SQ KEY.625 [15.88] 4X 4X 9 3-16UNC - 2B THD 8 SPEED FOR DETERMINING SHAFT RADIAL LOAD 45 1.65.13 [3.3] 1.45 2.9 4.35 TORQUE (LB. FT.) MODEL HP 7 PSIG TORQUE 9 PSIG 7 PSIG SPEED (RPM) HP 9 PSIG SM4AM 277 554 831 1.1.55 POWER (HP) MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 1.45 2.9 4.35 MAXIMUM ALLOWABLE SPEED MODEL LOAD SPEED (RPM) AIR CONSUMPTION 9 PSIG 7 PSIG SM4AM 277 554 831 12 8 4 AIR CONSUMPTION (SCFM)

5 6X 16-18UNC - 2B THD.44 [11.11] MIN DEEP 2X 12 4. [11.6].7 2.76 [7.] 1.38 2X 1 2 2.17 [55.2] NPT 4.34 [11.2] 7.3 [178.5].43 [11.] 1.51 [38.4] 1. [25.4].19 [4.8] SQ KEY 2.5 [63.5] 7.23 [183.5] 4.32 [183.5].625 [15.88] 5. [127.] 1.69 [42.9] 7.84 [199.1] 3.12 [79.2] 3.5 [88.9].25 [6.4] 4X.34 [8.6] 4.25 [18.] 5. [127.] 2.13 [54.] 2X 3.14 [79.6] 2X 4.88 [123.8] 4X.75 [19.1] 8. [23.3] 2.84 [72.1] 2.6 [52.3] 4X 3 8-16UNC - 2B THD 6.5 [165.].7 [17.8] 5.88 [149.4] 1.41 [35.8].19 [4.8] SQ KEY 4.5 [114.3].625 [15.88] 4X 9 45.13 [3.3] SPEED FOR DETERMINING SHAFT RADIAL LOAD 3.9 3 6 9 TORQUE (LB. FT.) MODEL TORQUE 9 PSIG 7 PSIG HP 7 PSIG HP 9 PSIG SPEED (RPM) SM6AM 277 554 831 2.6 1.3 POWER (HP) MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 15 3 45 MAXIMUM ALLOWABLE SPEED MODEL LOAD SPEED (RPM) AIR CONSUMPTION 9 PSIG 7 PSIG SM6AM 277 554 831 225 15 75 AIR CONSUMPTION (SCFM)

2.76 [7.] 1.38 [35.] 8.55 [217.1] 5.23 [133.].56 [14.2] 135.83 [21.1] 2x 1 NPT 2 4.43 [112.5] 2.38 [6.5] 7.32 [186.] 1.53 [38.9] 1.41 [35.8].19 [4.8] SQ KEY ø 3. [76.19] ø 3.88 [98.6] ø.75 [19.5] 5.59 [142.] 4x 3-16UNC - 2B THD 8.47 [12.] MIN DEEP 1.84 [46.8] 7.93 [21.4] 2.5 [63.5] 3.5.25 [6.4] 4X.34 [8.6] 2.25 [57.2] 4.5 [114.3] 4X 3.53 [89.8] 4X 5.54 [14.6] 4X.75 [19.1] 5.49 [139.5] 2.13 [54.1] 9.45 [239.9] 3.81 [96.7] ø 6.5 [165.1] 1.41 [35.8].19 [4.8] SQ KEY.96 [24.3] ø 5.88 [149.3] 4x 3-16UNC - 2B THD 8 ø 4.5 [114.3] ø.875 [22.22] 4X 9 45.13 [3.3] SPEED FOR DETERMINING SHAFT RADIAL LOAD 5.4 TORQUE (LB. FT.) 4.9 9.8 14.7 MODEL TORQUE 9 PSIG 7 PSIG HP 7 PSIG HP 9 PSIG SPEED (RPM) SM8AM 2425 485 7275 3.6 1.8 POWER (HP) MAXIMUM ALLOWABLE SHAFT RADIAL LOAD (LBS.) 2 4 6 MAXIMUM ALLOWABLE SPEED LOAD AIR CONSUMPTION 9 PSIG 7 PSIG MODEL SPEED (RPM) SM8AM 2425 485 7275 3 2 1 AIR CONSUMPTION (SCFM)

NON-REVERSIBLE -.25 H.P.. 3. 2 4 9.36 9.84 5.7 6. 1.92 2.1 1.17 1.26.258.264 6.24 6.56 3.8 4. 1.28 1.4.78.84.172.176 3.12 3.28 1.9 2..64.7.39.42.86.88 TORQUE (LB. FT.). 1 8. 1 2. 6 POWER (HP) SPEED ( RPM ) M o d e l 7 5 3 7 - C, 7 5 3 7-2 - C, 7 5 4 2 - C, 6 7 5 4 7 - C, 5 9 7 5 3 6 - B, 7 5 3 6-2 - B, 7 5 4 1 - B, 4 7 7 5 4 6 - B, 4 6 5 7 5 3 5 - C, 7 5 3 5-2 - C, 7 5 4 - B 8 5 7 5 4 5 - B 8 7 5 3 4 - B, 7 5 3 4-2 - B, 7 5 3 9 - B 9 4 7 5 4 4 - B 8 9 7 5 3 3 - B, 7 5 3 3-2 - B, 7 5 3 8 - B 8 7 5 4 3 - B 7 5 6 13, 2 1 9, 8 6 13, 1 8 1 9, 7 7 1 2, 9 4 4, 4 1 1 2, 9 3 4, 3 9 5 8 1, 7 7 2, 6 5 5 8 1, 7 6 2, 6 4 2 58 8 8 8 2 2 57 8 8 6 7 1 36 5 4 1 35 5 2 5 4588 FOOT MOUNTING BRACKET 41563 FLANGE MOUNTING BRACKET

NON-REVERSIBLE -.6 H.P.. 6 5 28.8 23.52 17.76 14.4 9. 5.4 4.2 2.58.84 19.2 15.68 11.84 9.6 6. 3.6 2.8 1.72.56 TORQUE (LB. FT.). 5 2. 3 9. 2 6 POWER (HP) 9.6 7.84 5.92 4.8 3. 1.8 1.4.86.28. 1 3 SPEED ( RPM ) M o d e l 8 2 2 9-1 A, 8 2 3-1 A, 8 2 3 2-1, 8 2 2 9-2 A, 8 2 3-2 A, 8 2 3 2-2, 8 8 2 2 9-3 A, 8 2 3-3 A, 8 2 3 2-3, 1 1 8 2 2 9-4 A, 8 2 3-4 A, 8 2 3 2-4 8 8 8 2 2 9-5 A, 8 2 3-5 A, 8 2 3 2-5 2 8 2 2 9-6 A, 8 2 3-6 A, 8 2 3 2-6 1 5 8 2 2 9-7 A, 8 2 3-7 A, 8 2 3 2-7 5 2 8 2 2 9-8 A, 8 2 3-8 A 8 9 8 2 2 9-9 A, 8 2 3-9 A 5 9 6 12, 1 8, 1 3, 6 5, 4 1 2, 2 2 3, 3 3 8 1, 7 7 6 2, 6 6 4 5 1, 4 1, 5 6 3 63 9 4 5 2 5 4 7 5 6 1 37 8 5 6 7 1 31 8 4 7 7 4557 FOOT MOUNTING BRACKET 41561 FLANGE MOUNTING BRACKET

NON-REVERSIBLE -.85 H.P.. 9. 7 2 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8 TORQUE (LB. FT.). 5 4. 3 6 POWER (HP) 22. 12. 6.4 3. 1.6.4. 1 8 SPEED ( RPM ) M o d e l 7 8 - B ( - 1 B, - 2 B, - 4 B ), 7 1 1, 4 7 8 1 - B ( - 1 B, - 2 B, - 3 B, - 4 B ), 4 4 2, 8 8 7 8 2 - B ( - 1 B, - 2 B, - 4 B ) 79 5, 5 9 7 8 3 - B ( - 1 B, - 2 B, - 3 B, - 4 B ) 37 8 5 6 7 8 4 - B ( - 1 B, - 2 B, - 3 B ) 2 4 8 7 8 5 - B ( - 1 B, - 3 B, - 4 B ) 11 2 5 1 7, 1 1 4, 3 2 1 2, 3 8 5 7 1, 1 3 4 4 6 1 2 2 3 3 4558 FOOT MOUNTING BRACKET 41559 FLANGE MOUNTING BRACKET

NON-REVERSIBLE -.85 H.P.. 9 66. 36. 19.2 9. 4.8 1.2 44. 24. 12.8 6. 3.2.8 TORQUE (LB. FT.). 7 2. 5 4. 3 6 POWER (HP) 22. 12. 6.4 3. 1.6.4. 1 8 SPEED ( RPM ) M o d e l 7 8 - B ( - 1 B, - 2 B, - 4 B ), 7 1 1, 4 7 8 1 - B ( - 1 B, - 2 B, - 3 B, - 4 B ), 4 4 2, 8 8 7 8 2 - B ( - 1 B, - 2 B, - 4 B ) 79 5, 5 9 7 8 3 - B ( - 1 B, - 2 B, - 3 B, - 4 B ) 37 8 5 6 7 8 4 - B ( - 1 B, - 2 B, - 3 B ) 2 4 8 7 8 5 - B ( - 1 B, - 3 B, - 4 B ) 11 2 5 1 7, 1 1 4, 3 2 1 2, 3 8 5 7 1, 1 3 4 4 6 1 2 2 3 3

NON-REVERSIBLE - 2. H.P. 2. 2 5 148.8 84.6 48.6 21.6 12.24 3.42 99.2 56.4 32.4 14.4 8.16 2.28 TORQUE (LB. FT.) 1. 8 1. 3 5. 9 POWER (HP) 49.6 28.2 16.2 7.2 4.8 1.14. 4 5 SPEED ( RPM ) M o d e l 8 2 5 - A, 8 2 5-4 A - ( ) 4, 5 9, 1 3, 5 8 2 4 - A, 8 2 4-4 A - ( ) 1, 1 2 5 2, 2 5 3, 3 7 5 8 2 3-4 A - ( ) 6 3 8 1, 2 7 6 1, 9 1 4 8 2 2 - A, 8 2 2-4 A - ( ) 2 9 1 58 2 8 7 3 8 2 1 - A, 8 2 1-4 A - ( ) 1 6 32 4 8 8 2 - A, 8 2-4 A - ( ) 8 9 17 8 2 6 7 459 FOOT MOUNTING BRACKET 41557 FLANGE MOUNTING BRACKET

Air Speed at Consumption Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 22N51-W/RC 1.75 1.31 28 28 49 66.4 66 89.5 55 1.6 21 9.5 Performance figures are at 9 psig (62 kpa) air pressure. W.) 25 5 75 24 16 8 TO..) W 9 PSI 1 2 3 1.8 7 PSI 7 PS TO 6 4 2 1.2.6 PO 1-17/32" (39.mm) 1/2" NPT REVERSE INLET 3." (76.mm) 12-7/16" (316.mm) 2-1/4" (57.mm) 3-1/4" (83.mm) 5-1/2" (14.mm) 1/2" NPT FORWARD INLET 1-1/4" (32.mm) 1/2" NPT EXHAUST PORT 13/32" (1.mm) DIA 4 HOLES 7-3/16" (183.mm).75" D.5" (19.5mm.13mm) 1 2 3 9/16" (14.mm) 1-3/4" (273.mm) 12-7/32" (31.mm) 9-1/2" (241.mm) KEY 3/16" SQ. x 1-1/8" (4.75mm SQ. x 28.6mm) SHAFT RADIAL LOAD

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible 551SM51-W/RC 5.6 4.18 95 12 4 542 545 739 16 4.53 93 42.2 551SO51-W/RC 5.6 4.18 59 77 65 881 885 12 16 4.53 93 42.2 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. W.) 966 644 322 6 4 2 24 16 8 TO..) W 41 82 123 551SM51 551SO51 A TOR 9 PSI 9 PSI 7 PSI 41 82 123 26 52 78 18 12 6 6 4 2 PO 1-3/4" (45.mm) 3/4" NPT REVERSE INLET 6." (152.mm) 4-1/4" (18.mm) 21/32" (17.mm) DIA 4 HOLES 5-3/8" (137.mm) 19-1/16" (484.mm) 2-3/4" (7.mm) 7." (178.mm) 3/4" NPT FORWARD INLET 3." (76.mm) 1." NPT EXHAUST 15." (381.mm) 2.".5" (51.mm.13mm) 1-3/8" (35.mm) 14." (356.mm) 18-11/16" (475.mm) 12-1/2" (318.mm) KEY 1/2" SQ. x 2-3/4" (13.mm SQ. x 7.mm) SHAFT RADIAL LOAD

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Direct Drive Reversible CCM 2.5 1.53 175 214 13.2 17.9 18.8 25.5 97 2.7 135 61.2 DD6M 2.6 1.94 75 149 24 32.5 34.2 46.4 79 2.2 135 61.2 EEM 4.4 3.28 735 145 41 55.6 59 8 137 3.9 2 9.7 EE5M 7.8 5.82 95 1875 6 81.4 8.5 19.2 22 6.2 21 95.3 HHM 11.3 8.43 73 145 16 144 152 26 27 7.6 235 17 HH5M 15.2 11.33 75 15 146 198 195 264 4 11.3 25 113 KK6M 25 18.64 755 15 26 353 325 441 68 19.3 475 216 Geared Drive Reversible EE3G 5 3.73 275 56 122 165 175 237 155 4.4 2 9.7 EE53G 6.8 5.7 35 6 154 29 25 278 22 6.2 22 99.8 EE9G 4.7 3.51 92 19 357 484 51 692 155 4.4 21 95.3 EE59G 6.5 4.85 1 2 45 61 6 814 22 6.2 23 14 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. All of the above motors are furnished less valve and piping as standard. Performance figures are at 9 psig (62 kpa) air pressure. W.) 6 4 2 6.6 13.2 19.8 TO..) W AIR COPTIO 152.4 11.6 5.8 742 1484 2226 2.16 9 PSI 7 PSI TORQ 9 PS 7 PSI 1.44.72 PO W.) W 8 6 4 2 11.9 23.8 35.7 T..) 126 517 134 1551 2.7 TORQ 9 PS 7 PS 7 PSI 9 PSI 84 42 1.8.9 PO CCM 742 1484 2226 517 134 1551

W.) 21.4 42.8 64.2 W 8 6 4 2 53 16 159 T..) 9 PSI 216 144 4.8 9 PSI 7 PSI TORQ 9 PS 7 PSI 72 3.2 1.6 PO W.) W 8 6 4 2 28.1 56.2 84.3 T..) AIR CO S MPTIO 9 PS 7 PS 65 13 195 8.1 T 7 PSI 9 PSI 345 23 115 5.4 2.7 PO 53 16 159 65 13 195 W.) W 2 15 1 5 54 18 162 T..) 9 PSI 53 16 159 12 9 PSI 7 PSI T 7 PS 423 282 141 8 4 PO 53 16 159

W.) W 2 71 142 213 15 1 5 52 14 156 T..) 7 PSI 642 428 214 16.5 9 PSI 7 PSI T 7 PS 11 5.5 PO W.) W 2 15 1 5 117 234 351 T..) 9 PSI 52 14 156 27 9 PSI 7 PSI T 9 PSI 7 PSI 174 716 358 18 9 PO 52 14 156 KK6M 52 14 156 W W.) 27 18 9 64 128 192 T..) 9 PSI 246 164 198 396 594 5.4 9 PSI 7 PSI T 9 PSI 82 3.6 1.8 PO 198 396 594

W.) 76 152 228 24 16 8 28 416 624 T..) W AIR CO S MPTIO 9 PS A 345 23 115 7.5 9 PSI 7 PSI TO 5. 2.5 PO W.) 6 4 2 185 37 555 T..) W 66 132 198 5.1 9 PSI 7 PSI T 7 PSI 7 PS 225 15 75 3.4 1.7 PO 28 416 624 66 132 198 W W.) 45 3 15 214 428 642 T..) 9 PSI 7 PSI 36 24 12 7 14 21 6.9 9 PSI 7 PSI T 9 PSI 7 PSI 4.6 2.3 PO 7 14 21

F G H O P Q V T WA T EXHAUST T L R J Y X T K W ST B C D A S- S E T Model A B C D E F G H J K L O P** Q R* S T V W X Y Thd. Key Dia. NPT NPT CCM, DD6M 23 9 16 3 3 4 7 3 4 7 7 8 1 1 2 25 32 7 13 32 11 3 16 3 8 3 4 15 5 8 13 3 4 1"-8 1 4 x 1 4 1.125 25 32 2 11 16 3 4 1 7 8 2 11 16 EEM, EE5M 27 3 13 16 9 3 4 9 9 32 12 1 2 25 32 9 17 32 12 17 32 3 9 5 16 16 13 16 15 1"-8 1 4 x 1 4 1.125 25 32 2 15 16 1 1 7 8 2 11 16 HHM 24 3 16 4 5 16 7 9 7 8 13 1 2 3 16 7 14 3 8 7 8 17 1 4 17 1 4 + 3 8 x 3 8 1.375 21 32 3 13 16 1 1 1 4 1 1 4 1 5 16 HH5M 24 3 16 4 5 16 7 9 7 8 13 1 2 3 16 7 14 3 8 7 8 17 1 4 17 1 4 + 3 8 x 3 8 1.375 21 32 3 13 16 1 1 1 4 1 1 4 1 5 16 KK6M 3 1 4 4 3 4 8 5 8 12 5 8 13 1 2 1 8 7 11 16 18 3 16 4 1 4 12 1 8 22 1 4 22 + 3 8 x 3 8 1.625 21 32 4 5 16 1 1 4 1 1 2 1 3 8 1 7 8 + The end of the shaft is not threaded on these Motors and no nut is used. *Tolerance: + -.5" **Thd. UNC2A. Model A B C D E F G H J K L O P Q R* S T X Y Thd. Key Dia. CCM, DD6M 599 95 197 2 267 2 188 284 76 222 397 349 1"-8 6 x 6 28 2 68 22 68 EEM, EE5M 686 97 248 236 318 2 242 318 76 237 427 381 1"-8 6 x 6 28 2 75 22 68 HHM 614 11 178 251 343 5 178 356 76 225 438 438 + 1 x 1 35 17 97 32 33 HH5M 614 11 178 251 343 5 178 356 76 225 438 438 + 1 x 1 35 17 97 32 33 KK6M 768 121 219 321 343 3 195 462 18 38 565 559 + 1 x 1 41 17 11 35 48 + The end of the shaft is not threaded on these Motors and no nut is used. *Tolerance: + -.13mm 15." (381.mm) 3/4-16 UNF-2A AC 1-1/8" (29.mm) 1-15/16" (49.mm) 2-3/32" (53.mm) SHAFT RADIAL LOAD B 15-1/4" (387.mm) 5-3/4" (146.mm) 7-3/4" (197.mm) 1." (25.mm) 23-1/2" (597.mm) 13-9/16" (345.mm) 12-9/16" (315.mm) 1." NPT AIR INLET BOTH SIDES 1." NPT EXHAUST 2-15/16" (65.mm) CENTER OF POWER SHAFT FOR MODELS EE3G AND EE53G FORWARD INLET FOR EE9G / EE59G REVERSE INLET FOR EE3G / EE53G 3-9/32" (83.mm) 7-3/4" (194.mm) 1-5/8" (41.mm) 11-3/4" (299.mm) 1-25/32" (45.mm) 4-1/8" (15.mm) FORWARD INLET FOR EE3G / EE53G REVERSE INLET FOR EE9G / EE59G CENTER OF POWER SHAFT FOR MODELS EE9G AND EE59G 25/32" (2.mm) 1/4" (6.mm) DIA 5/8" (16.mm) MODELS A* B KEY C in. mm in. mm in. mm EE3G, EE53G 1.251 31.78 4 15 32 114 1 4 x 1 4 x 1 25 32 6 x 6 x 45 EE9G, EE59G 1.51 38.13 3 5 8 92 3 8 x 3 8 x 1 11 16 1 x 1 x 43 *Tolerance: + -.5" (.13mm)

E x a m p l e : M M P 1 5 - A - - B - 2 - A M M P 1 5 - A B 2 A Series: MMP15 Air Motor Interface/Shaft Options: A = Standard Spline D = Keyed Shaft (Fenner RM41) Mounting Options: = Standard 1 = Base Mount Control Options: A = None B = Manual Valve C = Panel Mount Valve D = Pendant E = Accu-Trol Rotary Valve Bias Options: 1 = CCW (counter-clockwise), Standard Bias Rotation* 2 = CW (clockwise), Reverse Bias Rotation* Power Options: A = Air B = Natural Gas *As viewed from crankshaft end of motor. Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m MMP 15 16. 11.9 18 38 61. 82.7 78. 15.8 425 12. Performance figures are at 9 psig (6.2 Bar) air pressure. Motor Torque (ft-lbf) 8 7 6 5 4 3 2 1 Figure 1: MMP15 Air Motor Performance 425 cfm Air Supply at 9 psi Maximum Allowable Speed Torque Horsepower 5 1 15 2 25 3 35 4 Motor RPM 16 14 12 1 8 6 4 2 Motor Horsepower Maximum Allowable Shaft Radial Load (lbs) [With Fenner or NEMA 215TC Output Shafts] 8 6 4 2 Figure 2: MMP15 Air Motor Performance Load Maximum Allowable Speed Air Consumption (9 psig) 6. 45. 3. 15.. 5 1 15 2 25 3 35 4 Motor RPM Air Consumption (CFM)

1.63 (41 mm) 4 x M8 x 1.25 t 9.75 (248 mm) 2 x 3.18 (81 mm) 4.88 (124 mm) 2.62 (67 mm).81 (21 mm) 1.62 (27 mm) 11.97 (34 mm) Reverse Inlet 13 tooth Internal Spline h 3 Pressure Angle 9.523 (229.93 mm) to 9.551 (23. mm) 4 Places at 9 e STANDARD MOTOR CONFIGURATION 4 (113 mm) BASE MOUNT OPTION 1 (21 mm) 2.5 (52 mm) 5.75 (146 mm) 11.5 (292 mm) Crank Rotation 6.5 (165 mm) Inlet 12.8 (325 mm) 14.21 (361 mm) 8.82 (224 mm) Inlet 2 Places T 3.3 (84 mm) 2 Places t Plug one for Operation.44 (11 mm) (35 mm).66 (17 mm).33 (8 mm) Crankshaft.16 (4 mm) 4. (12 mm).95 (24 mm) 8.46 (215 mm).29 (7 mm) 4 x M12 x 1.75.72 (18 mm) 13.94 (354 mm) FENNER OPTION 2.71 (69 mm) Keyway 2.16 (55 mm) 4.9 (14 mm) 4.44 (113 mm) Key.3134 (7.96 mm) to.315 (8 mm) Shaft 1.12 (28 mm) to 1.128 (28.1 mm) Over Key 1.29 (3.71 mm) to 1.221 (31.1 mm) MANUAL CONTROL VALVE OPTION d Signal Valve t 4.25 (18 mm) 2.13 (54 mm) Reverse Signal 9.81 (249 mm) Inlet, 2 Places Plug One for Operation 8.38 (213 mm) 4.25 (18 mm) 4.36 (111 mm) 5.35 (136 mm) 3.19 (81 mm) 13.79 (35 mm) 2.75 (7 mm)

Air S p e e d a t C o n s u m p t i o n Model Max. Power Max. Power Free Speed Starting Torque Stall Torque at Max. Power Weight hp kw rpm rpm Ib.-ft. Nm Ib.-ft. Nm scfm m 3 /m lb. kg Reversible KK5B546 29 21.6 9 18 183 248 3 47 795 22.5 KK5B55 3 22.3 88 175 22 274 325 441 85 24.1 ALL models must be operated with sufficient load to prevent speed from exceeding maximum allowable speed shown on performance curve. Performance figures are at 9 psig (62 kpa) air pressure. KK5B55 - STD ROTARY VALVE KK5B546 - STD ROTARY VALVE 12 12 AIR CONSUMPTION (SCFM) 1 8 6 4 2 9 PSIG 7 PSIG AIR CONSUMPTION (SCFM) 1 8 6 4 2 9 PSIG 7 PSIG 5 1 15 2 SPEED (RPM) 5 1 15 2 SPEED (RPM) KK5B55 - STD ROTARY VALVE KK5B546 - STD ROTARY VALVE TORQUR (LB.FT.) 35 3 25 2 15 1 9 PSIG 7 PSIG MAXIMUM ALLOWABLE SPEED 9 PSIG HP 7 PSIG TORQUE 35 3 25 2 15 1 HORSEPOWER TORQUE (LB.FT.) 35 3 25 2 15 1 7 PSIG 9 PSIG MAXIMUM ALLOWABLE SPEED 9 PSIG HP 7 PSIG TORQUE 35 3 25 2 15 1 HORSEPOWER 5 5 5 5 5 1 15 2 SPEED (RPM) 5 1 15 2 SPEED (RPM)

KK5B55 B 2 B A Motorsize Mounting Output Control Controller Rotary Options Options Shaft Options Options Valve Options Options KK5B55-B2BA Rotary Valve Option A Equal Powered Controller Option None Control Option B Manual Throttle Output Shaft Option 2 Keyed Shaft 1 5 8" Dia. Mounting Option B Base Mount Motor Option 55 3 HP Motor O p t i o n C o d e D e s c r i p t i o n Weight l b. k g P a r t N u m b e r M o t o r O p t i o n s 5 4 6 5 5 2 9 H o r s e p o w e r M o t o r 3 H o r s e p o w e r M o t o r 2 5 1 2 5 1 1 1 3 1 1 3 K K 5 B 5 4 6 K K 5 B 5 5 M o u n t i n g O p t i o n s A B F l a n g e M o u n t, S T D w i t h S A E C 2 & 4 B a s e M o u n t, S t a t i o n a r y M o u n t i n g B o l t M o u n t 4 5 2 S t a n d a r d K 5 B - F o o t O u t p u t S h a f t O p t i o n s * S A E C, S T D w i t h S A E C 1 4 T o o t h F e m a l e S p l i n e I n p u t S t a n d a r d 1 **NEMA 213TC and 215TC, Keyed Shaft 1 3 8" dia. 13 6 K5B - NEMA - 213 2 ***Keyed Shaft 1 5 8" d i a. 2 4 1 1 K 5 B - S h a f t - 1. 6 2 5 Control Options A None Standard B Manual Throttle, Control Mounted Directly on Motor 19 19 K5B - Manual C Pilot Air Control, Required for Remote Controller Options 9 4 K5B - Pilot Controller Options None Standard 12 P e n d a n t C o n t r o l, S T D 2 B u t t o n P e n d a n t M L K - K 2 6 9 C Panel Control, Required for Remote Stationery Mounted Control UWD - A686 R o t a r y V a l v e O p t i o n s A B C E q u a l P o w e r e d B i a s e d P o w e r e d C C W B i a s e d P o w e r e d C W S t a n d a r d P O A P O A *Flange Gasket Required **Single Bearing Mount ***Double Bearing Mount 36 3/8 KEY x 3.5 LONG 11.25.) 27 18 9 K5B-SHAFT-1.625 KIT K5B-NEMA-213 KIT 1.6 9. 8.27 2 4 6 8 1 12

72 TYP FORWARD INLET 6.5 REVERSE INLET 3.94 1-1/4-11-1/2 NPT - 2 PLACES 16.123 16.12 DIA 2.253 14 TOOTH INTERNAL SPLINE 36 9 SAE C 2 OR 4 BOLT MOUNTING PAD 3.63 13.373 13.371 DIA 3.63 17.88 EXHAUST 2-1/2-8 NPT 16.65.38.81 2.253 5.3 5.1 DIA.375 DEEP 5/8-11 UNC - 2B 2 PLACES 1/2-13 UNC - 2B 4 PLACES.63 DIA.5 DEEP 2 PLACES.56 DIA -1 PLACES 15. DIA BOLT CIRCLE 2. 2 5 3 3.562 2. 2 5 3 (FACING SHAFT) A TOP VIEWS A A A B B B 9. 1.31 1.31 1/4 NPT 1-1/4 NPT 1.31 1.19 3.87 8.15 CONTROL INLET CCW (4) OUTLET CW 3.12 4.25 7.76 13.98 1/4 NPT CONTROL 1-1/2 NPT EXHAUST 3.82 1-1/2 NPT INLET 1-1/4 NPT INLET (CHOICE OF 3 PLACES) 4.5 1.2 6.5 1-1/4 NPT INLET CW (4) OUTLET CCW 4.94 11.4 13.63 C 6. 6. SIDE VIEWS.56 DIA 4 PLACES C 1.375 1.374 5/16 KEY x 1.5 LONG C 1.625 1.624 3/8 KEY x 3.5 LONG PILOT VALVE (OPTION) K5B-PILOT SEE NOTES 1, 2, AND 3 1-1/2 NPT EXHAUST 4.25 MANUAL THROTTLE (OPTION) K5B-MANUAL SEE NOTES 1 AND 5 PILOT CONTROL (OPTIONS) 2-1/2 NPT EXHAUST 3.94 16.123 STD. MOTOR KK5B546/KK5B55 STD. WITH SAE C 2 AND 4 BOLT MOUNT 14 TOOTH INTERNAL SPLINE 1/8 NPT SUPPLY 1.6 FOOT MOUNT (OPTION) K5B-FOOT 11.25 NEMA C (OPTION) K5B-NEMA-213 NEMA 213 AND 215 KEYED SHAFT (OPTION) K5B-SHAFT-1.625 1) PERFORMANCE REDUCTION OF 2% - SAME STARTING AND STALL TORQUE BUT REDUCED HORSEPOWER AND FREE SPEED AS VALVING RESTRICTS MAX. AIR FLOW PENDANT MLK-K269C (INCLUDES FITTINGS) 3/16" ID HOSE MUST BE PURCHASED SEPARATELY 5923 - SPECIFY LENGTH IN FEET 3 HOSES REQUIRED SEE NOTES 2 AND 3 1/8 NPT CONTROL PANEL MOUNT UWD-A686 HOSE-FITTINGS-TUBING NOT INCLUDED 3/16 TO 1/4 RECOMMENDED 3 LINES REQUIRED SEE NOTES 2 AND 3 2) FOR CONTROL LINE LENGTHS GREATER THAN 5 FT. AND FOR EVERY 5 FT. THEREAFTER, INSTALL TWO QUICK EXHAUST VALVES IN CONTROL LINES: MK-939-6, 1/4" ID HOSE 3) AIR PILOT CONTROLS GIVE GOOD CONTROL UP TO 1 FT. AS THE CONTROL LINES LENGTHEN, THE CONTROL RESPONSE DETERIORATES. ROUTE CONTROL LINES IN THE SHORTEST MANNER PRACTICAL 4) CW-CLOCKWISE ROTATION OF MOTOR LOOKING AT OUTPUT SHAFT OR SPLINE CCW-COUNTERCLOCKWISE ROTATION OF MOTOR LOOKING AT OUTPUT SHAFT OR SPLINE 5) THE MANUAL THROTTLE MAY BE REMOTELY MOUNTED UP TO 3 FT. AWAY USING EITHER 1-1/2" ID HOSE OR PIPE

Motor NPT Flow Rate Bowl Capacity Height Width Depth Motor Series Inlet Size Part No. Size scfm oz. in. in. in. M2, SM1AM, SM1UP 1/8 F35121-42 1/4 49.7 4.3 2. 2., 22, M4, M7, MV5AA, SM2AM 1/4 F35221-41 1/4 73 1.2 6. 2.3 2.3 SM4AM 1/4 F35231-41 3/8 17 1.2 6. 2.3 2.3 181, 1841 3/8 F35331-41 3/8 15 2.4 7. 2.8 2.8 17RA, 17RB, MVA17 3/8 F35341-41 1/2 19 2.4 7. 2.8 2.8 38, 384, 48, 484, 48RA, 48RB, 1/2 F35341-41 1/2 19 2.4 7. 2.8 2.8 22N51-W/RC, SM6AM SM8AM 1/2 F35351-41 3/4 211 2.4 7. 2.8 2.8 34RA, 34RB, MVA34 1/2 F35461-41 1 297 5.3 1.75 3.6 3.9 551, CCM, DD6M 3/4 F35451-41 3/4 273 5.3 1.75 3.6 3.9 92RA, 92RB, 92RM, 992RM, EEM, EE5M, HHM, 1 F35461-41 1 297 5.3 1.75 3.6 3.9 EE3G, EE9G, EE53G, EE59G HH5M 1 F42-A- 1-1/4 86 13. 14.9 8.5 8.5 KK6M, MMP15, MV75AA 1-1/4 F42-A- 1-1/4 86 13. 14.9 8.5 8.5 KK5B546, KK5B55 1-1/4 F35-B-C28 1-1/2 128 12.5 19. 7.8 7.8 Motor NPT Flow Rate Adj. Pressure Range Height Width Depth Motor Series Inlet Size Part No. Size scfm psi in. in. in. M2, SM1AM, SM1UP 1/8 R37121-6 1/4 55 5-25 3.5 2.9 2. M4, M7, MV5AA, SM2AM 1/4 R37221-6 1/4 73 5-25 4.75 2.2 2.7 SM4AM 1/4 R37231-6 3/8 84 5-25 4.75 2.2 2.7 181, 1841 3/8 R37331-6 3/8 167 5-25 5.5 3.2 2.8 17RA, 17RB, MVA17 3/8 R37341-6 1/2 198 5-25 5.5 3.2 2.8 38, 384, 48, 484, 48RA, 48RB, 1/2 R37341-6 1/2 198 5-25 5.5 3.2 2.8 22N51-W/RC, SM6AM 34RA, 34RB, MVA34, SM8AM 1/2 R37351-6 3/4 2 5-25 5.5 3.2 2.8 551, CCM, DD6M 3/4 R37451-6 3/4 29 5-25 7. 3.5 4. 92RA, 92RB, 92RM, 992RM, EEM, EE5M, HHM, 1 R37461-6 1 29 5-25 7. 3.5 4. EE3G, EE9G, EE53G, EE59G HH5M 1 R3-A-G 1-1/4 8 5-125 1.3 4.3 4.3 KK6M, MMP15, MV75AA 1-1/4 R3-A-G1 1-1/4 12 5-125 1.3 4.3 4.3 KK5B546, KK5B55 1-1/4 R4-B-G 1-1/2 12 5-125 11.9 5.3 5.3 Motor NPT Flow Rate Bowl Capacity Height Width Depth Motor Series Inlet Size Part No. Size scfm oz. in. in. in. M2, SM1AM, SM1UP 1/8 L36121-12 1/4 57.5 5. 2. 2. M4, M7, MV5AA, SM2AM 1/4 L36221-11 1/4 51 1.5 6. 2.25 2.25 SM4AM 1/4 L36231-11 3/8 15 1.5 6. 2.25 2.25 181, 1841 3/8 L36331-11 3/8 85 4. 7.7 2.75 2.9 17RA, 17RB, MVA17 3/8 L36341-11 1/2 156 4. 7.7 2.75 2.9 38, 384, 48, 484, 48RA, 48RB, SM6AM, 1/2 L36341-11 1/2 156 4. 7.7 2.75 2.9 22N51-W/RC SM8AM 1/2 L36351-11 3/4 222 4. 7.7 2.75 2.9 34RA, 34RB, MVA34 1/2 L36461-11 1 332 4. 1. 3.6 3.9 551, CCM, DD6M 3/4 L36451-11 3/4 368 4. 1. 3.6 3.9 92RA, 92RB, 92RM, 992RM, EEM, EE5M, HHM, 1 L36461-11 1 332 4. 1. 3.6 3.9 EE3G, EE9G, EE53G, EE59G HH5M 1 L4-A- 1-1/4 927 26. 11.61 5.5 5. KK6M, MMP15, MV75AA 1-1/4 L4-A- 1-1/4 927 26. 11.61 5.5 5. KK5B546, KK5B55 1-1/4 L4-B- 1-1/2 927 26. 11.61 5.5 5.

M2, SM1AM, SM1UP 1/8 C38121-82 1/4 46 5-25 FILTER =.4 5.2 4.75 3.2 LUBRICATOR =.4 M4, M7, MV5AA, SM2AM 1/4 C38221-81 1/4 51 5-25 FILTER = 1.2 6.6 6.6 3.2 LUBRICATOR = 1.5 SM4AM 1/4 C38231-81 3/8 63 5-25 FILTER = 1.2 6.6 6.6 3.2 LUBRICATOR = 1.5 181, 1841 3/8 C38331-81 3/8 99 5-25 FILTER = 2.4 7.7 8.7 3.6 LUBRICATOR = 3.7 17RA, 17RB, MVA17 3/8 C38341-81 1/2 15 5-25 FILTER = 2.4 7.7 8.7 3.6 LUBRICATOR = 3.7 38, 384, 22N51-W/RC 1/2 C38341-81 1/2 15 5-25 FILTER = 2.4 7.7 8.7 3.6 LUBRICATOR = 3.7 48, 484, 48RA, 48RB, SM6AM 1/2 C38341-81 1/2 15 5-25 FILTER = 2.4 7.7 8.7 3.6 LUBRICATOR = 3.7 SM8AM 1/2 C38351-81 3/4 155 5-25 FILTER = 2.4 7.7 8.7 3.6 LUBRICATOR = 3.7 34RA, 34RB, MVA34 1/2 C38461-81 1 215 5-25 FILTER = 5.3 1.75 11.1 4.3 LUBRICATOR = 3.2 551, CCM, DD6M 3/4 C38451-81 3/4 199 5-25 FILTER = 5.3 1.75 11.1 4.3 LUBRICATOR = 3.2 92RA, 92RB, 92RM, 992RM, EEM, EE5M, HHM, 1 C38461-81 1 215 5-25 FILTER = 5.3 1.75 11.1 4.3 EE3G, EE9G, EE53G, EE59G LUBRICATOR = 3.2 HH5M 1 Must use individual units KK5B546, KK5B55, KK6M, MMP15, MV75AA 1/4 Must use individual units Female IR Flow Rate Female ARO Flow Rate NPT Part Number scfm NPT Part Number scfm 1 4" 8842-W1-35 35 1 4" F25221-3 4 3 8" 8843-W1-35 35 3 8" F25231-3 51 1 2" 8844-W1-9 9 1 2" F25241-3 53 3 4" 8846-W1-9 9 3 4" F25452-31 5 1" 8828-W2-* 175 1" F25462-31 15 1 1 4" 883-W1-4 1 1 4" F25472-31 15 2" 8834-W1-7 *Two separate canisters Part Oil Number Number Quantity Recommended Use 1P 1 1 pt Fractional horsepower 1G 1 1 gal Air Motors 5P 5 1 pt One horsepower and 5G 5 1 gal larger Air Motors Part Grease Quantity Number Number lb. Recommended Use 28 1 LB 28 1 Motor gearing and 28 8 LB 28 8 bearings

1/8 F35111-42 1/8 38.7 4.3 2. 2. 1/8 F35121-42 1/4 49.7 4.3 2. 2., 22 1/4 F35221-41 1/4 73 1.2 6. 2.3 2.3 44 3/8 F35331-41 3/8 15 2.4 7. 2.8 2.8 1/8 R37111-6 1/8 43 5-25 3.5 2.9 2. 1/8 R37121-6 1/4 55 5-25 3.5 2.9 2., 22 1/4 R37221-6 1/4 73 5-25 4.75 2.2 2.7 SM4AM 1/4 R37231-6 3/8 84 5-25 4.75 2.2 2.7 44 3/8 R37331-6 3/8 167 5-25 5.5 3.2 2.8 1/8 L36111-12 1/8 32.5 5. 2. 2. 1/8 L36121-12 1/4 57.5 5. 2. 2., 22 1/4 L36221-11 1/4 51 1.5 6. 2.25 2.25 SM4AM 1/4 L36231-11 3/8 15 1.5 6. 2.25 2.25 44 3/8 L36331-11 3/8 85 4. 7.7 2.75 2.9 1/8 C38111-82 1/8 34 5-25 FILTER =.4 5.2 4.75 3.2 LUBRICATOR =.4 1/8 C38121-82 1/4 46 5-25 FILTER =.4 5.2 4.75 3.2 LUBRICATOR =.4, 22 1/4 C38221-81 1/4 51 5-25 FILTER = 1.2 6.6 6.6 3.2 LUBRICATOR = 1.5 44 3/8 C38331-81 3/8 99 5-25 FILTER = 2.4 7.7 8.7 3.6 LUBRICATOR = 3.7

5 5 16-1/2" (419.mm) Part Number MALE NPT Size MRV3A-AF35** 1 8" MRV15A-AC98* 1 4" SRA1A1-A212*** 3 8" MRV4A-AC99** 1 2" MOV1AA-674* 1 2" 3BM-WM7 3 4" 3 B M - A 6 7 4 * 1 " 1 5 B M - A 6 7 4 * 1 1 4" S S 3 5 - A 6 7 4 * 1 1 2" S T 5-6 7 4 2 " S S 8 - A 6 7 4 * 2 1 2" * High scfm Capacity ** Medium scfm Capacity *** Low scfm Capacity Part Number R144-212-1 R144-212-3 Description 3 8" square drive, 1" long 3 8" square drive, 3" long ARO motion control and air preparation components include the Alpha valve, Economair cylinder and Module Air air prep lines. Routinely used throughout industry, these lines have made their own name for their precision, durability and overall efficiency. fluids.ingersollrand.com 1-8-276-4658 M o t o r P i p e T a p Series Part Name Part Number NPT 181 Exhaust Deflector R181-A123 3 4'' 1841 Assembly 38 Exhaust Deflector R38-A123 3 4'' 384 Assembly 48 Exhaust Deflector R48-A123 1" 484 Assembly Part Number Female NPT Size Flow Rate D e s c r i p t i o n E252LM 1/4" 26 scfm 3-Way Hand Lever/Manual Return E212LM 1/4" 26 scfm 4-Way Hand Lever/Manual Return E312LS 1/4" 26 scfm 4-Way, 3-Position Hand Lever, Spring Return K214LM 1/2" 9 scfm 4-Way Hand Lever/Manual Return K314LS 1/2" 9 scfm 4-Way, 3-Position Hand Lever, Spring Return M512LR 1/4" 41 scfm 4-Way, 3-Position Rotary Lever, Manual Return M513LR 3/8" 65 scfm 4-Way, 3-Position Rotary Lever, Manual Return M514LR 1/2" 85 scfm 4-Way, 3-Position Rotary Lever, Manual Return

WARRANTY AIR MOTORS Ingersoll Rand warrants to the original user its air motors products to be free of defects in material and workmanship for a period of one year from the date of purchase. IR will repair, without cost, any Product found to be defective, including parts and labor charges, or at its option, will replace such Products or refund the purchase price less a reasonable allowance for depreciation, in exchange for the Product. Repairs or replacements are warranted for the remainder of the original warranty period. If any product proves defective within its original one year warranty period, it should be returned to an appropriate Ingersoll Rand Service Distributor, transportation prepaid with proof of purchase or warranty card. This warranty does not apply to Products which IR has determined to have been misused or abused, improperly maintained by the purchaser: or where the malfunction or defect can be attributed to the use of non-genuine IR parts. IR makes no other warranty, and all implied warranties including any warranty of merchantability or fitness for a particular purpose are limited to the duration of the expressed warranty period as set for the above. IR s maximum liability is limited to the purchase price of the Product and in no event shall IR be liable for any consequential, indirect, incidental, or special damages of any nature arising from the sale or use of the Product, whether based on contract, tort, or otherwise.