A TechForAg 'Ready-To-Milk' Modular Parlor Model:

Similar documents
A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 12 Thorp/Germania ParaBone Key Features:

i.e. no cost shown in the column on the right either If the Quantity in the very left column is shown as the item is not included

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 16 Heritage ProTime I HerringBone - New!

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 12 Original Germania ProTime II HerringBone

(Picture of Parlor Stalls not available at this time) This parlor should milk from 160 cows to 220 cows per hour with two milkers

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 4 Original Germania ProTime II HerringBone

A TechForAg 'Ready-To-Milk' Modular Parlor

TechForAg Modular Parlor

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 12 HERITAGE ProTime I HerringBone - Everything New!

A TechForAg 'Ready-To-Milk' Modular Parlor

A TechForAg 'Ready-To-Milk' Modular Parlor

A TechForAg 'Ready-To-Milk' Modular Parlor

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 8 Original Germania ProTime I HerringBone - Remanufactured

Germania, TechForAg & Heritage Parts

Germania, TechForAg & Heritage Parts

Germania, TechForAg & Heritage Parts

Germania, TechForAg & Heritage Parts. Automatic TakeOff Parts

Parts for ProTime I and ProTime II Parlors

TechForAg 1855-A W. Davenport Str.Rhinelander, WI Fax Kim Rolf

Germania, TechForAg & Heritage Parts. CIP Systems & Receiver Groups

C l 3774 EAST NEWPORT ROAD, GORDONVILLE, PA TOLL FREE: PHONE: FAX: CUSTOM PARLOR CATALOG

GEA Milfos iflow Rotary Parlour. engineering for a better world

NUPULSE AND HOLDREN CATALOG

CITY AND COUNTY OF DENVER DEPARTMENT OF PUBLIC WORKS Engineering Division PROJECT NO INCA STREET MULTI-USE PATH 38 TH AVE. TO 43 RD AVE.

ATTACHMENT I BID SCHEDULE IFB NO , CHURCH FARMS EAST STORAGE TANK AND BOOSTER PUMP STATION

Table of Contents. Item Page #

Protect. Enviro-Guard. environment. the. with

STATE OF MINNESOTA PRICING Page % DISCOUNT

ROADSIDE PARK CONTRACT JANITORIAL AND GROUNDS MAINTENANCE SERVICES

Small vents make a big difference

Porta John Systems, Inc.

SLURRY HANDLING SYSTEMS

3,000-5,500 lb CapaCity Stand-Up End Control lift trucks

Automatic Scrubber MODEL Ace 20C Parts List & Service Manual

Deadline for advance rate is 15 days prior to show opening.

E-Zee Product Disclaimer. Terms. Return Goods. Warranty Information. Ordering/Shipping/Pricing

Switchgear Skid, C1192

MIDLAND PRECAST COMPANY, L.C. Tel: Hwy 14 PO Box 63 Toll Free: Corydon, Iowa Fax:

5,000-17,000 HOPPER BIN packages

Cutterhead Dredge 55ft Ladder 20 X 18 X 46 In Hull Mount Pump Noble Spirit 2

I. SCOPE The supply of Water Tanker Trucks (Brand New), LHD, Suitable for Use in extreme climatic and physical conditions in Iraq. LOT 1 WATER TRUCKS

I. SCOPE The supply of Water Tanker Trucks (Brand New), LHD, Suitable for Use in extreme climatic and physical conditions in Iraq.

Parts List Book CPE CPVS

Shenandoah City Council AGENDA REPORT

Washer-Extractor Pocket Hardmount

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Models UW60P2 and UW60P3.

PARTS LIST FOR VIPER VIPER

Washer-Extractor. Parts. Pocket Hardmount. Refer to Page 3 for Model Numbers. Models UW35P2 and UW35P3.

Access Riser Fits PRO370 and PRO380 Series

BEDDING MANAGEMENT TOOLS

DRY PUMP / STAINLESS BUCKET

QUOTE For a 2017 Fire Department Conventional Truck Chassis-Water Tender With PTO Pump

THREE BRUSH ROLLOVER OR STATIONARY TRUCK WASH SYSTEM

Battery Backup Sump Pump System Instruction Manual

Towing and Road Service Guide For 2010 Lexus GX460. Quality and Education Services AAA Automotive 1000 AAA Drive Heathrow, FL 32746

STATE OF MINNESOTA PRICING PAGE (Typed Responses Required) Crawler Dozer. Spec # Information Requested Answer. Cold weather starting aid(s)

Washer-Extractor Cabinet Freestanding SF35, UF35, SF50, UF50, SF85, UF85

PARTS LIST FOR GX271. (Gasoline & LPG) GX271

Shades Technics. 2050RS Toilet Cubicle. Manual

Specifications/price list CMA CNC controlled gantry drilling machines type RAPID-DRILL GRD CNC and GRD 50Z CNC

CANTON COMMUNITY REQUEST FOR BOARD ACTION. ITEM: Consider Approving the Purchase of Three Fire Apparatus Vehicles

Washer-Extractor Pocket Hardmount

It s so easy. It will save time and money. Managing your change process and maintaining your cluster will improve animal health and milk quality.

LED Fog Light. Conflicts Note: 1832, 1852, 1856, 1872, General Applicability Fits Models

Operating & Maintenance Manual

Partnering with you in the dairy industry

HORSE BARNS & GARDEN SHEDS

HILLS MATERIALS COMPANY UNIT COST TOTAL COST UNIT COST TOTAL COST UNIT COST $294, $294, $74, $74, $35, $35,000.

NOTE: All dimensions shown are rounded up to the nearest inch to get even dimensions. TM.400NMTVP doc Page 1 of 5

Town of Medley Office of Capital Projects & Development Services 7777 NW 72 Avenue, Medley, Florida 33166

FREEDOM FILL AUXILIARY SYSTEM Gauge & Switch Console

SA-200-F163 (K6090-SM OR -SB)

PARTS LIST FOR ZR-8 ZR-8

VERTICAL PLATFORM LIFT USER GUIDE

Clean Water Made Easy

RENU ENERGY. Please note the following price quote for a 10 Million gallon per year biodiesel refinery in Montana:

Light-Duty And Heavy-Duty Walkie Stackers. Capacity: 2,200-3,500 lb

GENERAL PLANNING GUIDELINES MULTI-BAY CAR WASH

STATE OF MINNESOTA PRICING Page % DISCOUNT

VERTICAL ELECTRIC PUMPS

MNOSHA Fatality Investigation Summary (updated June 26, 2018) FFY 2017 (October 1, 2016 September 30, 2017)

In-Ground Passenger Elevator

Project Book Worksheet for Cost Estimation

BLASTMASTER 250 CFM 12-VOLT DC AFTERCOOLER

RESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS SECTION VI RESIDENTIAL SUBDIVISION SERVICE REQUIREMENTS

COMPACT RACK TYPE DISHWASHER

PUBLIC WORKS AND SERVICES PETROLEUM PRODUCTS DIVISION STANDARD DETAILED DRAWINGS FOR NORTHERN FUEL STORAGE AND DISTRIBUTION FACILITIES

Center Console Wood Grain Panel Cracked

ARIZONA DEPARTMENT OF TRANSPORTATION INFRASTRUCTURE DELIVERY AND OPERATIONS DIVISION CONTRACTS AND SPECIFICATIONS SECTION TABULATION OF BIDS

BLASTMASTER 400 CFM 12-VOLT DC AFTERCOOLER

T E C H N I C A L S P E C I F I C A T I O N WORKSHOP LUBRICATION TRUCK

Parts & Service Savings

YOUR TECHNICAL NEWSLETTER January 2011

Washer-Extractor Pocket Hardmount

INSPECTION PACKAGES. $110 Value! buy one, get one. free. plus, select inspections. free dri-fit jacket with 2 paid inspections

A/C-D/C Battery Backup Sump Pump System

NISSAN GENUINE ACCESSORIES. Print Close

Nice 'N Clean Car Wash On Sheridan Road

Big Easy RV & Boat Storage A Green Energy Project Jana Lane Wildomar, California

PRODUCT DATA. Parking Automat P kg 1

Transcription:

A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 8 Surge HerringBone - Conventional Exit - Remanufactured This parlor should milk from 60 to 75 cows per hour with one Milker Proposal for TechForAg WebSite # 183-0505216-3 What are we trying to accomplish with this Parlor? To make a very reasonably priced parlor available to a customer with few cows and a very limited budget. Dbl. 8 Surge HerringBone - This is the actual parlor. Page 1 of 25

Please Note: This is a standardized Bid Format we use for all parlors. Pictures match the equipment sometimes, but not always. If the Quantity in the very left column is shown as - 0 - that item is not included and there's no cost shown in the very right column. 16 Stalls Splash Shields & Front End - 45" Cow-to-Cow Spacing $ 3,429 16 Stalls TFA stainless Curbing & Gutter - New! Plus Original Germania Heave Grates cold galvanized - Reman'd Page $ 2 of 4,714 25

4 Entrance and Exit Gates 1 1/4" schedule 40 pipe $ 1,714 Straight Pipe Front End - no Rapid Exit, no Automatic Indexing Page 3 of 25

1 Group Germania Cow Traffic Controls for Entrance & Exit Gates (4) New Cylinders for Indexing $ 6,971 2 Units 32 ft long Brisket Bars - Cold Galvanized Double 4" schedule 40 Pipe, over-and-under - New! $ 5,486 Sorry for the lousy picture. (I couldn't get there right after the Brisket Bars were installed) Page 4 of 25

16 Units AIC 'Presto' TakeOffs and Milk Meters $ 13,600 Page 5 of 25

Surge Eclipse Claw Clusters 16 Units - Air Forks - Surge Shells - 60" Milk Hose - 108" Pulsation Hose - Short air tubes - Liners of your choice: Brand & Model - with Surge black and grey alternating Pulsators $ 7,771 Page 6 of 25

Pulsation System - New! 16 Stalls - 3" PVC Pulsation line with hoses, fittings & wiring harness - 3" PVC FreshAir line with fittings & hoses - (4) FreshAir Filters, two per side - (2) 3" PVC Cross-Overs in front & back - Pulsators iuncluded with Claw-Clusters $ 1,257 16-Unit Surge Pulsation Controller 2 Units Electrician provides 120 volt receptacle nearby - bid separately! $ 1,857 Page 7 of 25

100 ft 3" Lo-Line Incl. all brackets, nipples, clamps and gaskets Single loop, double slope line $ 3,571 100 ft 2" CIP Lines Incl. all brackets, nipples, clamps and gaskets $ 2,857 80 ft 2" Discharge line from Receiver Group to Milk Tank and back to the Receiver Group; includes special adapter and Safety Switch at Milk Tank. $ 2,857 Page 8 of 25

1 Group Surge Receiver Group $ 3,143 1 Group Conventional Surge CIP System Qty Units Description $ 6,310 Page 9 of 25

10 Hp Vacuum System with Lobe-Style Pump Gardner-Denver/Sutor-Built Pump 1 Group 1 Group Includes Frequency Controller/Variable Speed Drive - New! $ 9,063 6" PVC Header Lines with 3" fittings to Pulsation and to the Receiver Group; includes Filter, Check Valve. Slide ShutOff Valve, Safety valve, Drains, etc. $ 1,143 Electrician provides 430 volt 3 phase to this Group 6" Header Line supplies CIP Receiver Group and Pulsation System Page 10 of 25

1 Group On-Farm Spare Parts Kit (Contains only new parts) Includes all essential parts for at least (1) year of operation: an extra LLC, seal kit for the milk pump, an extra Pulsator, etc. $ 3,786 2 x 5-ft Stainless Curb Extensions in Front - New! 11 ft from Exit Gate to Breezeway Wall. Prevents manure from running into the pit; Includes concrete guard. $ 707 0 Pcs Double Compartment Sink $ - Accessories Group 1 Group Hand Wash Sink, Filter Sock Holder with (1) box of Filters, SST paper towel holder, Soap Dispenser, Hose Rack for garden hose in Milk House, etc. $ 214 Page 11 of 25

Pit Mats for 8 ft x 35 ft pit floor 0 sq ft Color of your choice - Blue, Green, Red or White $ - Page 12 of 25

1 Unit Stainless Pit Steps - 3 steps, 18" wide $ 143 Page 13 of 25

1 Unit Hose Reel with new Hose $ 214 (1) x 20 ft 1" clean-up hoses for the pit plus 0 Group (2) 40ft hoses for the cow platforms $ - 16 Units Traditional CIP Cup Holders $ 490 Page 14 of 25

Unit Stainless Breezeway Fence with (2) 3ft 'Side Wings' - Made from 2.5" x 2.5" square stainless tubing - 10- ft + 3 ft long, with - (2) Horizontals and - (4) 3 ft Verticals $ - Page 15 of 25

0 Stalls 1" Kraiburn Rubber Mats (Made in Germany) - New! For the (2) Modular Cow Platforms Plus Cost of Installation $ - Page 16 of 25

8-Stall stainless Modular Platforms - New! 2 Units The structural bases of the Modules; Height of your concrete cow platform should be 34" - if you are comfortable with a 38" working height. To be discussed! $ 3,643 We build our parlor modules on platforms, a frame work made form 2" x 4" steel tubing and usually 53" wide x 50.6 ft long for the typical dbl. 12. Normally, we slide the Modules into place on this steel frame work, pushed by a Skid Loader. Parlors up to dbl. 12 come on two trucks, all larger ones need four. Page 17 of 25

Summary Page Sub-Total Materials $ 72,483 Pre-Installation Labor and Supplies provided by TechForAg at it's factory to convert the above materials into a Ready-To- Milk Modular Parlor (calculated at 15% of Sub Total Materials) $ 10,872 Less 18 % Dairy-Direct-Discount no Dealer $ (13,047) 0 Truck Freigh to be quoted once we know where the parlor is going Freight - @ $3.15 per mile $ - On-Site Installation Labor, Supplies & Expenses (if parlor is installed in the State of Wisconsin) $ 15,600 (1) TechForAg Technician for (2) days to assist with unloading the Modules and installing them on the cow platform $ - Travel Expenses $ - Grand Total Parlor with Freight & Installation $ 85,909 Financing Available! Per Stall $ 5,369.30 Page 18 of 25

Terms - I If production at TFA starts several months in the future 1) 15% down at signing of contract 2) 35% on start of production 3) 45% on delivery of parlor to the dairy 4) 5% on Start-up of Milking 4) $1,000 Rebate for prompt payment Terms - II If production at TFA starts more or less immdiately 1) 35% at signing of contract, plus 2) 25% six weeks later 2) 35% on delievery of parlor to the dairy 3) 5% on start-up of milking 4) $1,000 Rebate for prompt payment Page 19 of 25

How much cash to re-instal this parlor? Page 20 of 25

Purchase cost Total $ 20,000.00 $ 2,400 $ 3,429 $ 3,300 $ 4,714 Page 21 of 25

$ 1,200 $ 1,714 Page 22 of 25

(8) new cylinders (2) used boxes installed in center of parlor (6) PT-421 with Red & Green Buttons, push - pull No Versa Valves Page 23 of 25

$ 9,520 $ 13,600 Page 24 of 25

$ 5,440 $ 7,771 $ 1,600.00 Page 25 of 25