Pixus Technologies Catalog

The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 916.524.8242 CAN: 519.885.5775

Individual Subrack Components Side Panels And Flanges Side Panels For Vario, Vario EMC, Compact And Vario Mobil System Attachment holes and anti-twist half shears on a mm pitch pattern. 2.5 mm aluminum Mounting flanges,see page 169 Rear flange,see page 170 D (T) a Packs Height (U) Order No. mm mm of 3 4 (3 + 1) 4 (3 + 2 x 1/2) 6 7 (6 + 1) 7 (6 + 2 x 1/2) 9 11 185 160 1 3684511 3684529 225 200 1 3684512 3685793 3685890 3684530 3685896 3685893 3685797 245 220 1 3684513 3685850 3685891 3684531 3685897 3685894 285 260 1 3684514 3684523 3684526 3684532 3685743 3685895 305 280 1 3684515 3685794 3684533 3685798 345 320 1 3684516 3684524 3684527 3684534 3685744 3685745 3684547-365 340 1 3684517 3685795 3684535 3685799 405 380 1 3684518 3684525 3684528 3684536 3684541 3684543 3684548 3684545 425 400 1 3684519 3684537 465 440 1 3684520 3685796 3685892 3684538 3684542 3684544 3684549 3684546 3684552 525 500 1 3684521 3684539 3685898 3685959 3684550 3685899 3684553 585 560 1 3684522 3684540 3684551 3684554 1 11 74 fl 2 3U 4U (3U + 1U) 4U (3U + 2 x 1/2U) T a fl 4.1 12.5 1 11 74 18 132 44.45 21.1 fl 2 fl 4.1 T a 12.5 22.23 11 T a 12.5 18 176.45 154.45 1 74 18 176.45 fl 2 fl 4.1 6U 7U (6U + 1U) 7U (6U + 2 x 1/2U) 133.35 121.68 1 11 fl 2 74 T a fl 4.1 12.5 18 265.35 133.35 121.68 1 74 11 44.45 21.75 fl 4.1 T a 12.5 18 fl 2 309.8 132.23 133.35 121.68 22.23 1 74 11 fl 4.1 T a 12.5 fl 2 18 309.8 9U U 11U 266.7 133.35 121.68 1 74 11 T a 18 12.5 398.7 133.35 121.68 1 88.9 74 65.55 11 T a 12.5 266.7 400.05 443.15 21.1 11 266.7 133.35 121.68 1 74 T a 12.5 18 400.05 487.6 fl 2 fl 4.1 21.1 fl 2 fl 4.1 18 fl 2 fl 4.1 168

Individual Subrack Components Side Panels And Flanges 482.6 mm (19") Mounting Flange 5 For all Ripac Vario subracks. 1 mounting flange EMC gaskets, vertical, see pages 171,179 U Packs Order No. Order No. of With Without Handle Holes Handle Holes 2 1 3684614 3 1 3684622 3684615 4 1 3684623 3684616 6 1 3684624 3684617 7 1 3684625 3684618 9 1 3684619 1 3684620 11 1 3684621 2.5 2.5 20 28 482.6 mm (19") Front Flange With T Channel To fit all Ripac Vario, Ripac Vario EMC, Ripac Compact and Ripac Vario Mobil subracks. The T-slot can be used for the attachment of components, for strain relief or for cable routing. EMC gaskets may be fitted for EMC applications. section U Packs Order No. of 3 1 3686192 6 1 3686193 9 1 3686194 5 2.5 1 front flange 20 2.5 EMC gaskets, vertical, see pages 171,179 3.8 4.3 8.2 2.25 7.5 28 482.6 mm (19") Mounting Flange, Recessed 2.5 To fit all Ripac Vario, Ripac Vario EMC, Ripac Compact and Ripac Vario Mobil subracks. For recessed mounting in the enclosure. 1 mounting flange U Packs Order No. of 3 1 3684626 4 1 3684627 6 1 3684628 7 1 3684629 9 1 3684630 1 3684631 11 1 3684632 Note: Assembly screws, nuts and washers should be ordered separately. Packs of Order No. 4 set 3687015 25 2.5 EMC gaskets, vertical, see page 179 22.75 169

Individual Subrack Components Side Panels And Flanges Side Panels For ECO System Attachment holes for 160 / 220 mm PCB installation. Continuous pitch pattern of holes top and bottom for cover attachment. 2.5 mm aluminum clear chromate 1 side panel D (T) Packs of Max. board Height (U) Order No. mm depth mm 3U 6U 180 1 160 3684502 3684505 240 1 220 3684503 3684506 3U 6U T1 a 12.5 T1 a 12.1 2.5 27.8 2.6 Top view of side plate 132 1 ø 2 74 11 ø 4.1 19" flange 18 Handles For Subracks The handles are mounted on the flanges via handle holes. Die-cast aluminum Painted, silver-gray U 4 2 36360 3 2 36360 7 2 36660 6 2 36660 2 handles, assembly parts Rear Flange 5 To fit all subrack versions. Guarantees an 84HP trim on the rear of the subrack. Integral profile to accommodate EMC gaskets. 1 trim EMC gaskets, vertical, see pages 171,179 For all subracks Ripac Vario, Ripac Vario EMC, Ripac Compact and Ripac Vario Mobil U Order No. Packs of 1 Order No. Packs of 2 2 3684633 3 3684634 3685276 4 3684635 6 3684636 3685277 7 3684637 9 3684638 3684639 11 3684640 2 2.5 20 133.35 121.68 1 ø 2 74 11 19" flange 18 265.35 ø 4.1 170

Individual Subrack Components Side Panels And Flanges Rear Flange With T Channel To fit all subrack versions. Guarantees an 84HP trim on the rear of the subrack. Additional T channels e.g. for cable routing, attachment of components or strain relief. EMC gaskets may be fitted for EMC applications. U 3 1 3686195 6 1 3686196 9 1 3686197 20 5 2 1 trim EMC gaskets, vertical, see pages 171,179 3.8 8.2 4.3 2.25 7.5 EMC Gaskets, Vertical To guarantee EMC protection between subrack sides and front and rear panels. There is a choice of two versions: Version 1: Segmented Version 2: One-piece For mounting on: 482.6 mm (19") flanges Rear trim EMC contact strip U-shaped front panels Trims for Ripac Vario-Module Mounting flanges for Ripac Vario-Module Stainless steel Version 1 Segmented U Order No. Order No. Packs of 1 Packs of 1 3686973 3684236 2 3686974 3684237 3 3686975 3684238 4 3686976 3684239 6 3686977 3684240 7 3686978 3684241 9 3686979 3684242 3686980 3684243 11 3686981 3684244 12 3686982 Version 2 One Piece U Order No. Packs of 1 2 36886 3 3688611 4 3688612 5 3688613 6 3688614 7 3688615 8 3688634 9 3688616 3688609 11 3688633 12 3688606 EMC Contact Strip To guarantee EMC protection when horizontal rails (PCB s) are set back. Integral groove to accommodate vertical EMC gaskets. 2 strips are required per subrack. 1 contact strip U 3 1 3684643 6 1 3684644 9 1 3684645 Note: Assembly screws should be ordered separately. M3 x 6 0 3684233 Also Required: EMC gaskets, vertical, see above 171

Individual Subrack Components Horizontal Rails Ripac Extrusion System: Complete, Simple And Well-Organized Main extrusions A Front horizontal rail B Front horizontal rail with mm extension for extractor handle type IV or VII B1 Double front horizontal rail with mm extension C1 Rear horizontal rail C3 Rear horizontal rail with integral Z rail C4 Rear horizontal rail for Ripac ECO C5 Rear horizontal rail with integral Z rail for Ripac ECO D1 Rear horizontal rail, center D2 Rear horizontal rail, center, with integral Z rail Additional extrusions E Rear adapter rail, center, to accommodate plastic guide rails F Z rail for connectors G Insulating strip* H Conductive strip* I Threaded insert J Identification strip K EMC gasket, horizontal * For conductive or insulated attachment of backplanes All system requirements are covered by just a few basic horizontal rail types. This is a well-organized, cost-effective range to fit all subrack systems and the instrument case/ rackmounted enclosure range Ripac Vario-Module. 172

Individual Subrack Components Horizontal Rails Front Horizontal Rail (A) 2.3 15.25 27 For accommodation of guide rails and securing of front panels. HP pitch pattern of holes for exact mounting of guide rails M 4 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length 2) Flash anodized Note: Order assembly screws separately. M4 x 12 0 3654300 Usable 4 (left) 1 3684592 4 (right) 1 3684955 8 (left) 1 3684593 8 (right) 1 3684956 12 1 3684594 16 1 3684595 20 1 3684596 21 1 3685985 40 1 3684960 42 1 3684560 63 1 3684561 84 1 3684562 84 2 3685267 1) 192 1 3688000 2) 1) Including 4 assembly screws 1.2 EMC gaskets, see page 177 3.4 5.2 6.6 24.5 Front Horizontal Rail (B) With mm Extension For Type IV And VII Injector/Extractor Handle For accommodation of guide rails and securing of front panels. Front projection and hole pattern based on IEEE 11. when using type IV and VII injectors/extractors HP pitch pattern of holes for exact mounting of guide rails M 4 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length Usable 40 1 3684961 42 1 3684565 63 1 3684566 84 1 3684567 84 2 3685269 1) 192 1 3688001 2) 1) Including 4 assembly screws Note: Order assembly screws separately. M4 x 12 0 3654300 2) Flash anodized EMC gaskets, see page 177 173

Individual Subrack Components Double Horizontal Rails Under B1 there are 3 Versions available: Version 1 for Dual PCB sizes (2 x 3U or 3U and 6U) above each other or mixed PCB sizes (2 x 3U next to 6U or 6U + 3U next to 9U) Version 2 for maximum load carrying in a minimum overall system height or for the horizontal mounting of PCBs in a Pizza Box Version 3 for max load carrying in combinations with other standard front horizontal rails (see above) Double horizontal rails are designed for: Improved load carrying (48 kg [8.8 lbs] per PCB at 4HP Improved connector force encounter (over 00N [225 lbf] per slot) Anti twist Injector/Extractor Handle interface 9U applications Max airflow design (max gap between front/rear rail) EMC improvement (no gap between 2 rails) Dual or mixed PCB size applications (2 x 3U in 6U, etc) Double Front Horizontal Rail, With mm Extension (B1)-Version 1 For the attachment of Guide Rails on both sides. One side with mm extension One side without mm extension Material/ EMC gaskets, see page 177 Usable 84 1 3688704 Note: Order assembly screws separately. M4 x 12 0 3654300 20.00 12.75.00 6.00 23.35 9.35 Double Front Horizontal Rail, With mm Extension (B1)-Version 2 For the attachment of Guide Rails on one side only. One side with mm extension One side without mm extension Material/ EMC gaskets, see page 177 Usable 84 1 3687724 Note: Order assembly screws separately. M4 x 12 0 3654300 20.00 12.75.00 6.00 19.95 9.35 Double Front Horizontal Rail, With mm Extension (B1)-Version 3 For the attachment of guide rails on one side only. Material/Surface: EMC gaskets, see page 177 Usable 84 1 3688024 Note: Order assembly screws separately. M4 x 12 0 3654300 34.35 20.00 12.75 6.00 9.35 19.00 11.00 174

Individual Subrack Components Horizontal Rails Rear Horizontal Rail (C1) For accommodation of guide rails and securing of Z rails, insulating or contact strips. HP pitch pattern of holes for precise installation of guide rails M 2.5 for fastening the Z rails, insulating or contact strips and backplanes M4 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length Usable 21 1 3685991 40 1 3684962 42 1 3684570 63 1 3684571 84 1 3684572 84 2 3685268 1) 192 1 3688002 2) 1) Including 4 assembly screws 6 9 5.4 6 2) Flash anodized Note: Order assembly screws separately. M4 x 12 0 3654300 8 11.75 23.5 Rear Horizontal Rail With Channel For Ripac ECO (C4) To accommodate guide rails and for the attachment of Z rails, insulating strips or contact strips. HP pitch pattern of holes for precise installation of guide rails Channel to slide in cover plates Threaded inserts (PS36846) are additionally required for mounting backplanes/z rails M4 thread at ends Straight-through core hole Not suitable for mounting under cover plates Usable 84 1 36884 Note: M4 x 12 assembly screws should be ordered separately, see above. 1.4 2.3 3.4 1.4 1.45 11.75 23.5 175

Individual Subrack Components Horizontal Rails Rear Horizontal Rail With Integral Z Rail (C3) For accommodation of guide rails. Integral Z rail for mounting of DIN 41 612 connectors. HP pitch pattern of holes for exact mounting of guide rails 84 threaded holes M2.5 for fitting DIN 41 612 connectors M4 thread at ends Straight-through core hole Usable 42 1 3686191 63 1 3686919 84 1 3686159 Note: Order assembly screws separately. M4 x 12 0 3654300 11.8 12.2 2.1 11 9.6 6.3 3.5 22.4 12.8 2 20 28 Rear Horizontal Rail, Center (D1).5 6.75 When using 6 U PCBs or modules. Mounting facility for Z rails, insulating or contact strips and backplanes. 84 threaded holes M2.5 M4 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length 2) Flash anodized Usable 40 1 3684963 42 1 3684580 63 1 3684581 84 1 3684582 84 1 3685270 1) 192 1 3688003 2) 1) including 2 assembly screws Note: Order assembly screws separately. M4 x 12 0 3654300 3.2 7.25 21.3 15.3 8 Rear Adapter Rail, Center (E) 6.15 When dividing 6U into 2 x 3U, the adapter rail fastened to the center horizontal rail accommodates the guide rails. HP pitch pattern of holes for precise installation of guide rails M4 and M2.5 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length 2) Flash anodized Usable 4 1 3684585 8 1 3684586 12 1 3684587 16 1 3684588 20 1 3684589 40 1 3684964 42 1 3684590 63 1 3686005 84 1 3684591 84 1 3685272 1) 192 1 3688004 2) 21.3 16.8 12.3 15.2 1) including 2 assembly screws 3.2 6 13 2.15 Note: Order assembly screws separately. 14.9 M4 x 12 0 3654300 176

Individual Subrack Components Horizontal Rails Z Rail For Connectors DIN 41 612 (F) 3 With 84 x M2.5 thread. Usable 4 1 3684597 8 1 3684598 20 1 3684599 40 1 3684965 42 1 3684600 63 1 3684601 84 1 3684602 84 2 3685271 Note: Order assembly screws separately. 8.25 21.5 M2.5 x 6 0 3654340 1 Threaded Insert (I) With M 2.5 threaded holes in a 1HP pitch pattern. For pushing into front horizontal rails and rear rails of Ripac ECO, type A and type B. Steel Zinc-plated, passivated Usable 4 1 3684603 8 1 3684604 12 1 3684605 16 1 3684606 20 1 3684607 21 1 3686149 40 1 3684966 42 1 3684608 63 1 3684609 84 1 36846 EMC Gaskets, Horizontal (K) As horizontal EMC protection. For snapping onto the front horizontal rails. Stainless steel Usable For upper / lower horizontal rail 40 1 3684974 84 1 3684808 84 3684246 When dividing 6U into 2 x 3U, between two horizontal rails 84 1 3685789 84 3685229 Identification Strips (J) For identifying the installation positions on the subrack, self-adhesive. The following versions are available: 4 mm wide: For front rails, horizontal rails 4 mm wide: For rear horizontal rails 2 mm wide: For front horizontal rails (groove) Width Packs of Labeling Order No. 4 mm 2 1... 84 3687575* 4 mm 2 1... 168 3687577 4 mm 2 84... 1 3687574* 2 mm 2 1... 84 3687576* * Extended delivery times 177

Individual Subrack Components Horizontal Rails Contact Strip (H) For conductive mounting of backplanes. Length 8HP Slides onto the rear horizontal rail Aluminum Usable 84 1 3684612 84 2 3685273 4.2 Insulating Strip (G) For insulated mounting of backplanes. Length 21HP Snaps onto the rear horizontal rail Plastic, self-extinguishing to UL 94-V0 Usable 21 1 3684611 21 8 3685274 Rear horizontal rail equipped with insulating strip (top) and contact strip (bottom). 8.75 8.75 4.2 Perforated Strip Aluminum Usable 84 2 3685275 15 EMC Gaskets, Horizontal For horizontal EMC protection. Snap onto the front horizontal rails. Stainless steel Usable For upper/lower horizontal rail 40 1 3684974 84 1 3684808 84 3684246 When dividing 6U into 2 x 3U, between two horizontal rails 84 1 3685789 84 3685229 178

Accessories n Components For EMC Assembly EMC Gaskets, Vertical To guarantee EMC protection between subrack sides and front and rear panels. There is a choice of two versions: Version 1: Segmented Version 2: One-piece For mounting on: 482.6 mm (19") flanges Rear trim EMC contact strip U-shaped front panels Trims for Ripac Vario-Module Mounting flanges for Ripac Vario-Module Stainless steel Version 1 Segmented U Order No. Order No. Packs of 1 Packs of 1 3686973 3684236 2 3686974 3684237 3 3686975 3684238 4 3686976 3684239 6 3686977 3684240 7 3686978 3684241 9 3686979 3684242 3686980 3684243 11 3686981 3684244 12 3686982 Version 2 One Piece U Order No. Packs of 1 2 36886 3 3688611 4 3688612 5 3688613 6 3688614 7 3688615 8 3688634 9 3688616 3688609 11 3688633 12 3688606 EMC Gaskets For Cover Plates For EMC shielding between the horizontal rails and covers. Stainless steel HP 84 3684245 EMC Contact Strip To guarantee EMC protection when horizontal rails are set back. Integral groove to accommodate vertical EMC gaskets. 2 strips are required per subrack. 1 contact strip U 3 1 3684643 6 1 3684644 9 1 3684645 Note: Assembly screws should be ordered separately. M3 x 6 0 3684233 Also Required: EMC gaskets, vertical, see above 179

Accessories Vertical Divider Kits n Divider Kit A A B For combined installation of Euroboards and double Euroboards in 6U and 9U subracks. Aluminum 2 front horizontal rails 1 adapter rail 2 threaded inserts 1 vertical support (from 12HP) Assembly parts Front panels, see below EMC gaskets, see pages 177-179 6U (2 x 3U) HP (B) HP (A) Order No. 6U 2 x 3U 68 14 3684220 61 21 3684221 54 28 3684222 42 40 3684223 40 42 3684224 9U (1 x 6U + 1 x 3U) HP (B) HP (A) Order No. 9U 1 x 6/1 x 3U 80 4 3684225 76 8 3684226 70 12 3684227 66 16 3684228 62 20 3684229 Divider Kit Incl. Guide Rails B A A For combined installation of Euroboards and double Euroboards in 6U subracks. 2 front horizontal rails 1 adapter rail 2 threaded inserts 1 vertical support (from 12HP) 2 guide rails per slot Assembly parts Front panels, see below EMC gaskets, see pages 177-179 6U (2 x 3U) HP HP Number Order No. Order No.* (B) (A) of slots for extrator 3U handles 80 4 1 3685037 3685137 76 8 2 3685038 3685138 70 12 3 3685039 3685139 66 16 4 3685040 3685140 62 20 5 3685041 3685141 *Front horizontal rail with mm extension See page 172 for details. Divider Kit, Recessed For set back installation of 6U PCBs in 9U subracks of more than 160 mm PCB depth. 2 front horizontal rails 1 divider panel 2 threaded inserts 2 guide rails per slot Assembly parts EMC gaskets, see pages 177-179 9U (6U Recessed) HP HP Number Order No. Order No.* (B) (A) of slots for extractor 3U handles 80 4 1 3685058 3685158 76 8 2 3685059 3685159 70 12 3 3685060 3685160 66 16 4 3685061 3685161 62 20 5 3685062 3685162 *Front horizontal rail with mm extension See page 172 for details. Front Panel front panel To conceal the vertical rails of the divider kit; must be ordered in addition to the divider kit for Euroboards/double Euroboards. Aluminum 1 front panel 1 vertical EMC gasket (for EMC) Assembly part U HP 6 2 1 3685176 9 2 1 3685268 EMC Version U HP 6 2 1 9 2 1 3684738 180

Accessories Vertical Divider Kits/Horizontal Mounting Kits Vertical Support Required for combined installation of single, double and triple Euroboards in one subrack. U 6 1 3684678 9 1 3684679 Horizontal Mounting Kit For horizontal installation of 6U/9U PCBs in 3U/4U subracks. Horizontal installation space: 3U subrack: 20HP (5 slots) 4U subrack: 28HP (7 slots) Vertical installation space: (for double Euroboards only) 31HP (without trim frame) 28HP (with trim frame) Aluminum, clear chromated 2 front horizontal rails 2 rear horizontal rails.5 rear horizontal rails, center 2 threaded inserts 4/6 insulating strips 4 connecting parts Assembly parts 3U 4U Order No. Order No. 6U horizontal 3684206 3684208 9U horizontal 3684207 3684209 3U 4U Order No. Order No. 6U horizontal 36842 3684212 9U horizontal 3684211 3684213 Trim Frame For Horizontal Mounting Kit To cover the front rails of the horizontal mounting kit. Aluminum Anodized 1 trim frame U HP For 3U For 4U horizontal subracks subracks Order No. Order No. 6 56 3685783 3685785 9 84 3685784 3685786 Trim Frame For Horizontal Mounting Kit, Vented To cover the front rails of the horizontal mounting kit. Ventilation holes prevent hot spots from developing on the printed circuit boards. Aluminum Anodized, clear chromated (EMC version) 1 trim frame EMC accessories (for EMC version) U HP For 3U For 4U horizontal subracks subracks Order No. Order No. 6 63 3685787 3685788 Note: Captive screws and plastic collars should be ordered separately. EMC Trim Frame: U HP For 3U For 4U horizontal subracks subracks Order No. Order No. 6 63 3685291 3685292 Note: Alignment screws should be ordered separately. Order No. 3687.050 (slotted), packs of 0 181

Subrack Accessories Guide Rails Guide Rails (Plastic) For 160, 220 and 280 mm PCBs up to a nominal thickness of 2 mm. 2 versions are available: for snap-in and screw fastening for snap-in fastening (see photo) Fiberglass-reinforced polycarbonate (UL 94 V-1), RAL 7032 PCB Packs Order No. Order No. depth of snap-in/screw snap-in fastening* fastening 160 mm 1 3684657 3684654 220 mm 1 3684658 3684655 280 mm 1 3684659 3684656 *Note: Order assembly screws separately. Packs of Order No. 0 3654360 Guide Rails (Plastic) For ESD Clip Installation For 160, 220 and 280 mm PCBs up to a nominal thickness of 2 mm. By installing ESD clips, an electrical connection can be made between the PCB and the subrack assembly. Fiberglass-reinforced polycarbonate (UL 94 V-1), RAL 7032 ESD clips, see below PCB Packs Order No. depth of 160 mm 1 3684660 220 mm 1 3684661 280 mm 1 3684662 ESD Clips To create an electrical connection between the PCB and subrack, or to discharge static charges of the PCB. May be installed in guide rails for ESD clips installation and end pieces for guide rails. Packs of Order No. 3687726 50 3650990 Guide Rails (Aluminum) For extreme mechanical loads. Suitable for nominal PCB thicknesses of 1.6 mm. A distinction is made between guide rails with and without end pieces. Guide rails without end pieces are screwed directly onto the horizontal rail. Aluminum PCB Packs Order No. Order No. depth of without* for end pieces endpieces 160 mm 1 3687526 3684663 220 mm 1 3687527 3684664 280 mm 1 3687528 3684665 1 meter 1 3684666 Note: Order assembly material separately. Screw M2.5 x 6 0 3654340 Nut M2.5 0 3654370 Retaining cage M2.5 0 9901417 End Pieces For Guide Rails (Aluminum) Metal ESD clips, Order No. 3687726 may be fitted in order to discharge static charges. Fiberglass-reinforced polycarbonate, UL 94-V1 ESD clips, see above End piece, front 1 3684668 End piece, rear 1 3685759 ESD clips 3687726 182

Subrack Accessories n Guide Rails Guide Rails (Plastic), Keyable Guide rails 4HP, keyable, to IEEE 11.. For a nominal thickness of 1.6 2.0 mm Keying areas for the installation of keys (see page 186) Option of installing ESD clips to discharge static charges (see page 185) Narrow design for maximum air flow Various color variants for distinction between the slots: red for CPU, green for power supply, yellow and gray for board type plug-in units slot identification. Only for use in conjunction with injector/extractor handles, types IV and VII (see page 98). Polycarbonate, basic material to UL 94-V0 Keys, see page 186 ESD clips, see page 182 ESD clip PCB guide For PCB Packs Gray Red Green Yellow depth of Order No. Order No. Order No. Order No. 160 mm 3685257 220 mm 3685258 280 mm 3685259 160 mm 1 3684669 3686063 3687832* 3689089 3688055 3689090 220 mm 1 3686136 3689092 280 mm 1 3684954 3689093 * With 1/2HP offset Keys ESD clip for front panel Keyable Guide Rails For I/O Assemblies Guide rails 4HP, keyable, to IEEE 11.. Designed to accommodate a ground contact for assembly of a pluggable earth connection. For a nominal thickness of 1.6 2.0 mm For 75 mm deep PCBs Keying areas for the installation of keys (see page 186) Option of installing ESD clips to discharge static charges (see page 185) Narrow design for maximum air flow For cpci or VME applications Color For PCB Packs Guide Rail Guide Rail depth of top bottom Order No. Order No. Grey 75 mm 1 3687936 3687937 Yellow 75 mm 1 3689097 3689098 Only for use in conjunction with injector/extractor handles, types IV and VII (see page 98). Polycarbonate, basic material to UL 94-V0 Keys, see page 186 ESD clips, see page 182 Ground contact, see below Ground Contact Ensures a pluggable ground connection. Only for use with 80 mm guide rails for I/O board type plug-in units. UL recognized for 30A. Die-cast zinc Housing, contact spring Housing + 1 set 3689036 contact spring Housing + 50 sets 3687951 contact spring Assembly screw 50 36849 M3.5 x 12 mm 183

Accessories Guide Rails n Keyable Guide Rails, With 1/2 HP Offset Guide rails with.5hp offset. Guide part for use in telecommunications applications. This allows PCBs to be populated on both sides. Green guide rails with offset are prescribed in the Compact PCI standard for the installation of power packs (PICMG 2.11) For PCB thickness 1.6 2.0 mm 4HP x 160/220 mm Narrow design for maximum air flow Coding areas for the installation of keys (see page 186) Option of installing ESD clips to discharge static charges (see page 185) Only for use in conjunction with type IV and VII handles Telecom (see page 98). For PCB Packs Color Order No. depth of Gray 3686137 160 mm 1 Yellow 3689090 Green 3687832 Gray 3686136 220 mm 1 Yellow 3689092 Green Polycarbonate, self-extinguishing to UL94-VO 1 guide rail Keys, see page 186 ESD clips, see page 182 Extractor handles, type IV, VII with offset, see page 98 Keyable Universal Guide Rails (Aluminum), Three-Part Guide rails, keyable, with aluminum center part, for high mechanical loads. Suitable for a nominal thickness of 1.6 2.0 mm. The guide rails comprise the following individual components: 2 end pieces 1 aluminum center part Insulating center part(s) End Pieces For Three-Part Guide Rails For a PCB thickness of 1.6 2.0 mm. Polycarbonate, self-extinguishing to UL94-VO Front end piece 1 3685790 Rear end piece 1 3684670 Note: When ordering individually, one front and one rear end piece is required for each guide rail. Aluminum Center Part For Three-Part Guide Rails For a PCB thickness of 1.6 2.0 mm. Aluminum For PCB Order No. Order No. depth Packs of 1 Packs of 220 mm 3684673 3685260 280 mm 3684674 3685261 340 mm 3684675 3685262 400 mm 3684676 3685263 Insulating Center Part For Three-Part Guide Rails The insulating center part slides onto the aluminum center part. Length: 60 mm Plastic, self-extinguishing to UL 94-V0 Packs of Order No. 1 3684677 3685264 For PCB depth No. of insulating strips required 160 mm 1 220 mm 2 280 mm 3 340 mm 4 400 mm 5 184

Accessories Guide Rails Air Block Panel For Unused Slots 4HP To conceal unused slots and prevent airflow. Snap-fastens onto keyable guide rails in unused slots. Suitable for all 4HP x 160 mm standard Guide Rails (not offset) Polycarbonate UL 94-V0 Color: Blue For 4HP plastic guide rail 160 mm 1 3687924 ESD Clip For keyable guide rails. To discharge static charges. ESD clip for PCB guide (B) For permanent, direct discharge from the PCB before connector contact ESD clip for front panel (A) To discharge static charges in conjunction with an ESD pin (C). Inserted into the end piece of the guide rail Only for use in conjunction with extractor handle with ESD pin (type IV, type VII). Order No. ESD clip ESD clip for for PCB front panel 50 3684204 3684205 Stainless steel 50 ESD clips ESD Clip PCB guide Keys ESD Clip front panel 185

Accessories n Keying n Keys Keys are used for keying plug-type assemblies, and prevent them from being used in incorrect slots. The keys are inserted into the chambers of keyable guide rails and type IV and VII injector/extractor handles. There are 64 different keying options in total for each guide rail. When the upper and lower guide rail are both keyed, this produces a total of 4,096 different combinations. Plastic, self-extinguishing to UL 94-V0 0 keys Keying tool for simple assembly of up to 3 keys Color Gray 0 3684325 Red 0 3684326 Standards: IEEE 11., IEC 60 297-5-3, PICMG 2. Position 1 Position 2 Position 3 Position 4 Keying Tool For simple assembly of keys. Up to 3 coding keys may be fitted simultaneously. An integral alignment pin makes positioning easier. Plastic, UL 94-V0 1 keying tool Packs of Order No. 1 3687956 186

n Accessories Board Ejector PCB Ejector/Retainer To secure and extract PCBs without a front panel. Fastens to the PCB. The retainer can be used on its own as a PCB retainer. Fiberglass-reinforced polycarbonate (UL 94-V0), RAL 7032 PCB ejector/retainer PCB retainer Order No. PCB ejector/ PCB retainer retainer only 3687014 3687052 Plastic Guide Rails For Box Type Plug-In Units For PCB thickness 1.6 mm. For use in conjunction with slotted cover plates for box type plug-in units. Order No. see page 213. Noryl guide rails For PCB depth 160 mm 3606140 220 mm 3606200 187

Accessories Covers n Covers Version 1 To fit all Vario System subracks, Vario EMC, Compact and Mobil. To cover the overall subrack depth (EMC application) or to protect connectors. Flat design top and bottom Optionally perforated or solid For mounting on the subrack side panel with the aid of mounting blocks. For EMC applications, additional mounting blocks must be fitted over the entire subrack depth 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated Set 2 covers 8 mounting blocks at 28.5 mm 24 assembly screws Single Unit 1 cover T d1 Single Unit Set HP For side panel Cover depth Order No. Order No. depth T (mm) d1 (mm) Perforated Solid Perforated Solid 21 225 192 3687618* 3687620* 21 285 252 3687619* 3687621* 42 175 142 3684957* 3687626* 42 225 192 3687623* 3687627* 42 245 212 3684958* 3687628* 42 285 252 3685642* 3687629* 84 175 142 3684681* 3684680* 3685245 3685250 84 225 192 3684694* 3684683* 84 235 202 3685851* 3685813* 84 245 212 3684695* 3684684* 3685246 3685251 84 285 252 3684696* 3684685* 84 295 262 3685855* 3685814* 84 305 272 3685852* 3684686* 3685247 3685252 84 345 312 3684698* 3684687* 84 365 332 3685853* 3684688* 3685248 3685253 84 405 372 3684700* 3684689* 3685249 3685254 84 465 432 3684701* 3684691* 84 525 492 3684702* 3684692* 84 585 552 3684703* 3684693* *The following should be ordered separately: Mounting blocks 3684234 Assembly screws 0 3684233 EMC gaskets 3684245 EMC Gaskets For Covers For EMC shielding between the horizontal rails and covers. Stainless steel HP 84 3684245 188

Accessories Covers Covers Version 2 To fit all subracks Vario System subracks, Vario EMC, Compact and Mobil. To cover the PCB depth. Flat design top and bottom Optionally perforated or solid For mounting on the subrack side panel with the aid of mounting blocks 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated Set 2 covers 8 mounting blocks @ 28.5 mm 24 assembly screws Single Unit 1 cover d2 d1 Single Unit Set HP For side panel Cover depth Order No. Order No. depth T (mm) d1 (mm) Perforated Solid Perforated Solid 21 160 142 3687630* 3687634* 21 220 202 3687631* 3687635* 42 160 142 3684957* 3687636* 42 220 202 3687633* 3687637* 42 280 262 3687638* 3687639* 84 160 142 3684681* 3684680* 3685245 3685250 84 220 202 3685851* 3685813* 84 280 262 3685855* 3685814* 84 340 322 3685856* 84 400 382 3685857* *The following should be ordered separately: Mounting blocks 3684234 Assembly screws 0 3684233 Covers Version 3 To fit all Vario System subracks, Vario EMC, and Mobil.To cover the overall subrack depth (EMC application). Cover with 1U fold (no. 1), to conceal the 1U section in the subrack In addition, a flat cover (no. 2) is also required Front optionally perforated or solid Suitable for subracks 4U (3 + 1), 7U (6 + 1), 11U For mounting on the subrack side panel with the aid of mounting blocks. For EMC applications, mounting blocks must be fitted over the entire subrack depth 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated Single Unit 1 cover with 1U fold d3 T Pos. 2 Pos. 1 Single Unit HP For side panel Cover depth Order No. depth T (mm) d1 (mm) Perforated Solid 84 285 270 3684720* 3684714* 84 345 330 3684721* 3684715* 84 405 390 3684722* 3684716* 84 465 450 3684723* 3684717* 84 525 5 3684724* 3684718* 84 585 570 3684725* 3684719* *The following should be ordered separately: Mounting blocks 3684234 Assembly screws 0 3684233 EMC gaskets 3684245 189

Accessories Covers n Covers Version 4 To fit all Vario System subracks, Vario EMC, and Vario Mobil. To cover the overall subrack depth. Covers top/bottom with.5u fold to cover the.5u section in the subrack Front optionally perforated or solid Suitable for subracks 4U (3 + 2 x.5) and 7U (6 + 2 x.5) For mounting on the subrack side panel with the aid of mounting blocks For EMC applications, additional mounting blocks must be mounted across the entire depth 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated Single Unit 1 cover with.5u edge fold d3 T Single Unit HP For side panel Cover depth Order No. depth T (mm) d1 (mm) Perforated Solid 84 285 270 3684732 3684726 84 345 330 3684733 3684727 84 405 390 3684734 3684728 84 465 450 3684735 3684729 84 525 5 3684736 3684730 84 585 570 3684737 3684731 *The following should be ordered separately: Mounting blocks 3684234 Assembly screws 0 3684233 EMC gaskets 3684245 Mounting Blocks For mounting covers, versions 1 4, on the subrack side panel. For EMC applications, additional mounting blocks must be fitted across the entire subrack depth. Die-cast Nickel-plated The table shows the number of mounting blocks required to install 1 cover with EMC shielding. Mounting blocks 3684234 28.5 mm long *The following should be ordered separately: Assembly 0 3684233 screws M3 x 6 No. of mounting Cover blocks for maximum depth (mm) EMC protection 4 142 8 192 212 12 252 14 272 16 312 18 332 20 372 24 432 28 492 32 552 190

Accessories Covers Covers (Snap Fastening) Version 5 To fit all Vario System subracks, Vario EMC, Compact and Vario Mobil.To cover the overall subrack depth or PCB depth. Simple Assembly: Side folds with half shears facilitates fast assembly (without mounting blocks) by simply snap-fastening Side notches for fitting horizontal rails in 160, 220 or 280 mm depth Optionally perforated or solid 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated 1 cover 2 gaskets Single Unit HP For side panel Cover depth Order No. depth T (mm) d1 (mm) Perforated Solid 21 160 mm 175/185 3687624 21 160/220 mm 235 3687692 42 160 mm 175/185 3687625 42 160/220 mm 235 3687677 42 160 mm 245 3687640 84 160 mm 175/185 3687641 3687647 84 160 mm 245 3687642 3687648 84 160/220 mm 235 3687643 3687649 84 160/220 mm 285 3687644 3687650 84 160/220 mm 305 3687645 3687651 84 160/220/280 mm 345 3687646 3687652 Covers For Ripac ECO subracks. Covers the entire subrack depth. Optionally perforated or solid Covers are inserted into the horizontal rails and secured at the sides Mounting clips may optionally be used for additional support Sheet steel Zinc-plated 1 cover HP For side panel Order No. depth (mm) Perforated Solid 84 175 36885 36887 84 235 36886 36888 Mounting clips, Order No. 36889, packs of 1 Assembly screws, Order No. 9902188, packs of 1 191