H SUPPORT EQUIPMENT Support Equipment In This Section Mobile Ingredient Bins H-1...198 Kettle Drainer H-2...199 Rack/Tray Carts H-3...200 Tray, Cup or Glass Rack Carts H-3-B...201 Cup & Glass Rack Carts & Dollies H-3-C...202 Slicer Table and Mixer Stand H-4...203 Mobile Utility Tables H-4-B...204 Utility Delivery Carts H-5...205 Mobile Under Counter Soak Sink H-6...207 Storage Cabinets H-7...208
Mobile Ingredient Bins 47-75 47-150 47-250 47-75 DIMENSIONS Bins are available in three sizes 75 lb. capacity measures 19-1/4 deep, 14-1/4 wide and 27-1/2 high 150 lb. capacity measures 22-3/8 deep 17-3/8 wide and 27-1/2 high 250 lb. capacity measures 24-3/8 deep 22-3/8 wide and 27-1/2 high WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. The Piper Ingredient Bins are used for storing and handling various dry bakery products, such as flour or sugar. The mobility allows the worker to store the bins under work tables or other various storage areas. Bins are available in three separate sizes to meet your needs. Use stainless steel in applications where ruggedness is required. STANDARD FEATURES 20-gauge stainless steel sides, with vertical seam welded, ground smooth and polished Vertical corners rounded on radius of 1-3/4 Top edge rolled-diameter 7/16 Bottom edge flanged outward approximately 3/8 Bottom is deep drawn 18-gauge stainless steel, 5 deep, with vertical corners rounded on 1-1/4 radiushorizontal corners rounded on 1 radius. Top edge flanged outward to correspond with flange on bottom edge of sides Two parts are welded together - inside seam soldered smooth One piece fully enclosed rubber bumper encircles bin and is tightly cemented to the extended metal flange Four 4 diameter, ball bearing, swivel casters 16-gauge stainless steel slide-off cover with rolled edges is provided Card holder Model# Capacity 47-75 75 lbs 12 gallons 47-150 150 lbs 27 gallons 47-250 250 lbs 40 gallons (A) Length (B). Width (C). Height Ship Wt. (lbs) 19-1/4 14-1/4 27-1/4 44 22-3/8 17-3/8 27-1/4 50 24-3/8 22-3/8 27-1/4 60 LIMITED WAANTY: piper products warrants to the original purchaser parts and H-1 198
Kettle Drainer 325-3560 325-3560 The Kettle Drainer manufactured by Piper can stand up to the many demands of every day use. This unit is constructed of heavy-duty stainless steel. STANDARD FEATURES 18-gauge stainless steel body 1 diameter stainless steel tube handle 18-gauge stainless steel strainer, perforated with 3/16 diameter holes Drain shall be 1-1/2 diameter with 8-1/2 long stainless steel extension arm Protective rubber bumper encircles unit HEAVY-DUTY CASTERS 5 diameter x 1/1/4 wide swivel sealed wheels, two with brakes Delrin bearing, each with 350 lb. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility or superior performance even in freezing temperatures COMMON OPTION R R (311-1248) Drain with shut-off valve WAANTY One year parts and labor. Warranty is detailed on inside front cover of the price list. Model# Outside Dimensions at Rubber Bumper 325-3560 22-1/4 x 17-1/4 Height of handle from floor - 31-1/2 Height to top of side from floor - 9-1/2 Inside Dimensions Length Width Depth Ship Wt. (lbs) 19-3/4 14-3/4 5 28 LIMITED WAANTY: piper products warrants to the original purchaser parts and H-2 199
Rack/Tray Carts 912 Cabinet w/ 2-2128 RACK DOLLY 337-2404 311-1215 Rack Cart 337-3475 337-3475 337-2404 Tray Cart 337-3470 Cabinet Dolly 2-2128 RACK DOLLY Stainless dolly of 14 gauge stainless steel. Model No. 337-2404 Aluminum dolly of.125 aluminum Model No. 311-1215 All models are engineered to safely transport and store any load of 20" x 20" racks filled with cups and glasses. Four 4" swivel-type casters TRAY CART Model No. 337-3470 Stainless steel shelf and handle Four 4" swivel-type casters 31-1/2" high; 6-1/2" to top of shelf RACK CART Model No. 337-3475 Stainless steel shelf and handle Four 4" swivel-type casters 31-1/2" high; 6-1/2" to top of shelf Cabinet Dolly Model No. 2-2128 Aluminum dolly of.125 aluminum Four 4" swivel-type casters Dolly for 912 (Stackable Cabinet; Spec J-5) OPTIONS B - Corner bumper (Not available on 2-2128) (337-3470 & 337-3475 receive two corner bumpers on side opposite handle and two rotating bumpers on handle side) PB - Perimeter bumper (Available for 337-2404 & 311-1215 only) WB - Two locking casters Y4 - Polyurethane 4" casters (set of 4) Y5 - Polyurethane 5" casters (set of 4) CP - Correctional Package (Casters welded on unit) MODEL# DESCRIPTION SHELF SIZE HT. FROM FLOOR TO TOP OF HANDLE 337-3470 Stainless Steel Tray Cart (with Tubular handle) 337-3475 Stainless Steel Rack Cart (with Tubular handle) LIMITED WAANTY: piper products warrants to the original purchaser parts and GAUGE OF NO. OF SHELVES SHELF HT. FROM FLOOR OVERALL HEIGHT SHIP WT. H-3 LIST PRICE 21 1/2 X 16 1/2 31 18 ga. SS 1 10 N/A 500 24 $562.00 21 1/2 X 21 1/2 31 18 ga. SS 1 10 N/A 500 24 $584.00 337-2404 Stainless Steel Rack Dolly 20 1/2 Sq. N/A 14 ga. SS 1 N/A 5 7/8 500 14 $389.00 311-1215 Aluminum Rack Dolly 20 1/2 Sq. N/A.125 Al 1 N/A 5 7/8 500 14 $281.00 2-2128 Aluminum Cabinet Dolly 21 3/4 W X 28 3/8 D N/A.125 Al 1 N/A 7 3/4 500 25 $194.00 200
Tray, Cup or Glass Rack Carts 720 720-1 722 721 721-1 723 720 723 Models 720, 720-1, 722, 721, 721-1 and 723 mobile tray, cup or glass rack carts. FRAME AND PLATFORM The frame is constructed of 1" O.D. 16 ga. stainless steel tubing, with 3/4" O.D. integrally welded cross rails for rigidity. The platform is constructed of 18 ga. stainless steel flanged down 1-1/4" for rigidity. The platform is set 12" above the floor. Tray units include a vertical tray stop. CASTERS The units are mounted on four 4" diameter heavy duty, swivel casters. MODEL 720: Sized for 14" x 18" trays. MODEL 720-1: Same as Model 720, except sized for 16" x 22" trays. MODEL 722: Same as Model 720, except sized for 20" x 20" racks. MODEL 721: Sized for two stacks of 14" x 18" trays or one stack of 18" x 26" pans. MODEL 721-1: Same as Model 721, except sized for two stacks of 15-1/4" x 20-1/2" trays. MODEL 723: Same as Model 721, except sized to accept two stacks of 20" x 20" cup or glass racks. Options R - Rotating bumper WB - Wheel brakes (set of 2) Y4 - Polyurethane 4" casters (set of 4) Y5 - Polyurethane 5" casters (set of 4) MODEL No. OVERALL DIMENSIONS L W H SHIP WT. APPROXIMATE CAPACITIES 720 23" 22" 36" 30 90: 14" x 18" trays 720-1 23" 22" 36" 35 90: 16" x 22" trays 722 23" 22" 36" 35 6: 20" x 20" x 4" 721 33" 22" 36" 55 Two stacks of trays, 14 x 18" maximum size, or one stack of 18 x 26" pans. 721-1 35" 22" 36" 60 Two stacks of trays, 15-1/4" x 20-1/2" maximum size. 723 43" 22" 36" 65 Two stacks of racks, 20" x 20 maximum size. Add 3" to length and width for rotating bumpers. LIMITED WAANTY: piper products warrants to the original purchaser parts and H-3-B 201
Cup & Glass Rack Carts & Dollies 750 750-1 R-470 750-1 750 R-470 Shown with optional rotating bumpers. IFICATIONS Models 750 and 750-1 cup or glass rack dollies for 20" x 20" rack size. PLATFORM The platform is constructed of 14 ga. stainless steel turned up 1-1/4" on all four sides. On Model 750-1 a 1" O.D. 16 ga. tubular "U" shaped stainless steel handle is welded to the platform corners. The platform has a 1/2" hole in the center to permit drainage when the dolly is washed. CASTERS The units are mounted on four 4" diameter heavy duty casters. MODEL 750: Unit with platform only. MODEL 750-1: Unit with platform and tubular handle. Options B - Corner bumper PB - Perimeter bumper (Available for 750 only) WB - Wheel brakes (set of 2) Y4 - Polyurethane 4" casters (set of 4) Y5 - Polyurethane 5" casters (set of 4) NOTE: Other size platforms are available. CAPACITY One stack of 20" x 20" racks. OVERALL DIMENSIONS: Model 750: 20-1/2" long, 20-1/2" wide, 6-1/2" high. Model 750-1: 20-1/2" long, 20-1/2" wide, 36" high. Approximate shipping weight: 30 LIMITED WAANTY: piper products warrants to the original purchaser parts and IFICATIONS Model R-470 cup or glass rack cart for 20" x 20" rack size. FRAME The frame is constructed of 1" O.D. 16 ga. stainless steel tubing with 3/4" O.D. integrally welded cross rails for rigidity. SHELVES AND SLIDES The unit contains two solid 18 ga. stainless steel shelves, formed with three sides turned up 1" and the front edge turned down 1", and with all edges hemmed. All corners are notched to the contour of, and welded to the frame to form a unitized assembly. One pair of 1" x 2" 16 ga. stainless steel angle slides are welded to the frame between the two shelves. The bottom shelf is 12" above the floor, the angle slides are 6-1/2" above the bottom shelf and the top shelf is 26-1/2" above the floor. CASTERS The unit is mounted on four 4" diameter heavy duty casters. Options R - Rotating bumper WB - Wheel brakes (set of 2) Y4 - Polyurethane 4" casters (set of 4) Y5 - Polyurethane 5" casters (set of 4) CAPACITY Five 20" x 20" cup or glass racks. OVERALL DIMENSIONS 24" long, 23" wide, 36" high. NOTE: Add 3" to length and width for rotating bumpers. Add 2" to length and width for circular bumpers. Shipping weight: 60 H-3-C 202
Slicer Table and Mixer Stand MX-52-R Accessory Rack SLICER TABLE 331-3424 MIXER STAND MX-29-TSS 121-23-29TSS MX-52-R MX-29-TSS 121-23-29TSS Mixer Stand Piper s Mixer or Tray Stand is versatile and heavy-duty. Add the Accessory Rack and the unit becomes a portable work station. STANDARD FEATURES 14-gauge stainless steel top with stainless steel plug over opening marine edge Top shall have a marine edge to retain any drippings Base of stand shall be of 1-5/8 O.D. steel tubing legs with stainless steel under shelf Welded bottom shelf Four 4 diameter heavy duty casters, two with brakes OPTIONS 341-3500 - Rotating bumper 3313429 - Bullet feet in lieu of casters WB - Two locking casters Y4 - Polyurethane 4" casters (set of 4) Y5 - Polyurethane 5" casters (set of 4) MIXER STAND IFICATIONS Model# Length Width Height Ship Wt. (lbs) MX-29-TSS 29 23 28-1/2 63 121-23-29TSS 29 23 23-1/4 60 MX-52-R - - 52 7 Slicer Table The Slicer Stand manufactured by Piper can stand up to the many demands of every day use. This unit is constructed of heavy-duty stainless steel and is fully welded. STANDARD FEATURES 14-gauge stainless steel top with marine edge Stainless steel legs and cross rail Pan slides shall be of stainless angle and removable in gang of five slides Pan slides to be welded on 4-1/2 centers Welded bottom shelf Four 4 diameter heavy duty casters SLICER TABLE IFICATIONS 331-3424 Model# Length Width Height Ship Wt. (lbs) 331-3424 27-1/8 31-1/8 34 95 LIMITED WAANTY: piper products warrants to the original purchaser parts and H-4 203
Mobile Utility Tables 705-1 705-1 Model 705-1 mobile utility table. FRAME The frame is constructed of 1-5/8" O.D. 14 ga. stainless steel tubing welded to round stainless steel flanged gussets for attaching to the underside of the top. TOP The top is formed of 14 ga. stainless steel with all sides flanged down 1-1/2" and securely anchored to the frame assembly. UNDERSHELVES The undershelves are formed of 16 ga. stainless steel, with all edges turned down 1-1/2" and back at a 30º angle for rigidity. The corners of the undershelves are notched to the contour of the uprights, and welded to them to form a unitized assembly. The bottom shelf is set 10" above the floor, with 10" clearance between the shelves. CASTERS The unit is mounted on 5" diameter extra heavy duty, double ball bearing swivel casters. Two casters are fitted with brakes. OVERALL DIMENSIONS Model Width Depth Height 705-1 30" 30" 34" Shipping weight: 130 OPTIONS R - Rotating bumper 3313429 - Bullet feet in lieu of casters WB - Two locking casters Y4 - Polyurethane 4" casters (set of 4) Y5 - Polyurethane 5" casters (set of 4) LIMITED WAANTY: piper products warrants to the original purchaser parts and H-4-B 204
Utility Delivery Carts 4-UCS-3 4-UCM-3 6-UCS-2 6-UCS-3 6-UCM-2 6-UCM-3 6-UCL-2 6-UCL-3 1-UCS-2 1-UCS-3 1-UCM-2 1-UCM-3 1-UCL-2 1-UCL-3 6-UCM-2 4-UCS-3 Built for heavy-duty service. Carts are available in two and three shelf models, they come with load capacities from 400 to 1000 pounds. All Piper Products are built to the highest standards of construction. STANDARD FEATURES Reinforced handle with bumper Vertical bumpers on 600 lb. and 1000 lb. models Four swivel casters on 400 lb. models Two fixed and two swivel casters on 600 lb. and 1000 lb. models Shelves and supports all stainless steel construction All carts meet National Sanitation Foundation specifications CONSTRUCTION All Carts Cart to be constructed of stainless steel. Cart handle to be constructed of one-inch diameter, 18 gauge stainless steel tube. Handles to be equipped with donut bumpers attached to cart with 14 gauge mounting brackets. 400 lb. Carts Frame to be constructed of 14 gauge stainless steel corner supports with 18 gauge shelving hemmed on all four edges. All shelves and corner supports to be tig welded at joints and corners. 12 gauge aluminized steel caster supports to run the length of the entire bottom shelf, designed for swivel plate casters. CONSTRUCTION CONTINUED 6-UCL-2 600 lb. Carts Frame to be constructed of 16 gauge stainless steel 1 x1 tubing. Shelves to be constructed of stainless steel. All shelves and corner supports to be tig welded at joints and corners. Cart to include two vertical, non-marking, bumpers. Carts wheel assembly shall be constructed of 3/4 diameter, solid stainless steel axle, 12 gauge stainless steel caster supports and 8 wheels. 1000 lb. Carts Frame to be constructed of 16 gauge stainless steel 1 x1 tubing. Shelves to be constructed of stainless steel. All shelves and corner supports to be tig welded at joints and corners. Shelves to also include a 1 x1 stainless steel tube brace. Cart to include two vertical, non-marking, bumpers. Carts wheel assembly shall be constructed of 3/4 diameter, solid stainless steel axle, 12 gauge stainless steel caster supports and 8 wheels. HEAVY-DUTY CASTERS Plate casters for added rigidity and stability 5" x 1-1/4" sealed wheels Delrin bearing, each with 350 lbs. capacity Maximum resistance to chemicals, acids, bases, alcohol, water and steam Maximum low temperature flexibility for superior performance, even in freezing temperatures Caster brakes optional H-5 205
Utility Delivery Carts 4-UCS-3 6-UCM-2 MODEL # DESCRIPTION DIMENSIONS CAPACITY L W H (LBS) SHIP WT 4-UCS-3 3 Shelf Small 24" 15.5" 33" 400 45 4-UCM-3 3 Shelf Medium 30" 20" 37" 400 80 6-UCS-2 2 Shelf Small 28" 17-1/2" 39-1/4" 600 60 6-UCS-3 3 Shelf Small 28" 17-1/2" 39-1/4" 600 70 6-UCM-2 2 Shelf Medium 39-1/4" 23" 39-1/4" 600 80 6-UCM-3 3 Shelf Medium 39-1/4" 23" 39-1/4" 600 94 6-UCL-2 2 Shelf Large 54" 32" 39-1/4" 600 109 6-UCL-3 3 Shelf Large 54" 32" 37-5/16" 600 135 1-UCS-2 2 Shelf Small 28" 17-1/2" 39-1/4" 1,000 100 1-UCS-3 3 Shelf Small 28" 17-1/2" 39-1/4" 1,000 120 1-UCM-2 2 Shelf Medium 39-1/4" 23" 39-1/4" 1,000 142 1-UCM-3 3 Shelf Medium 39-1/4" 23" 39-1/4" 1,000 175 1-UCL-2 2 Shelf Large 54" 32" 37-5/16" 1,000 155 1-UCL-3 3 Shelf Large 54" 32" 37-5/16" 1,000 185 OPTIONS / ACCESSORIES R R R R (-SL) Slotted for holddown straps (Straps available in three different lengths: Please specify when ordering) 96 Straps (Strap-96") 120 Straps (Strap-120") 126 Straps (Strap-126") (-WB) Wheel brakes Note: (SL) and (Straps) are not available for the 4-series units H-5 LIMITED WAANTY: piper products warrants to the original purchaser parts and labor for a period of twelve (12) months from the date of purchase. See manufacturer s complete accredited at the Federal Level by the Occupational Safety and Health Agency (OSHA) and ANSI as a National Recognized Testing Laboratory. These companies include CSA International, Underwriters Laboratories, and the National Sanitation Foundation. However, a continuing they are developed. Consequently, all models may not bear the appropriate labels at all times. do not entitle buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. Information is not for design purposes. 206
Mobile Under Counter Soak Sink 337-3474 337-3477 337-3555 337-3557 337-3474 The Piper heavy-duty Under Counter Soak Sink is designed to fit under most counters that allow silverware or similar products to be placed into for soaking purposes. STANDARD FEATURES Heavy gauge stainless steel sink has coved corners on a 1-3/4" radius Sink bottom is sloped toward the center of the compartment and fitted with a lever handle drain Sink bowl is mounted on four stainless steel legs All welds are ground smooth Four swivel stem casters, two with brakes DIMENSIONS 337-3474 - 24" x 24" x 18" (with chute) 337-3477 - 24" x 24" x 18" (without chute) 337-3555 - 24" x 24" x 32" (without chute) X X 337-3557 - 24" x 24" x 32" (with chute) NOTE: Furnished standard with lever handle drain. Bowl size 24" x 24" x 8" deep. *Add 10" for height from back of chute to front of sink. Model# Length Width Height 337-3474 24" 24" 18" 337-3477 24" 24" 18" 337-3555 24" 24" 32" 337-3557 24" 24" 32" LIMITED WAANTY: piper products warrants to the original purchaser parts and H-6 207
Storage Cabinets 7773-B 7773-M OPTIONS R R (SRA) - Single reinforcing angles R R (DRA) - Double reinforcing angles 7773-B MODEL NUMBER DIMENSIONS W-D-H NO. OF SHELVES BASE FRAME SHIPPING WEIGHT (LBS.) 7773 36" x 24" x 72" 4 No base 270 7773-B 36" x 24" x 78" 4 Stationary 280 7773-M 36" x 24" x 78" 4 Mobile 280 7773-M Series 7700 enclosed stainless steel storage cabinets, stationary or mobile. CABINET The cabinet is constructed of stainless steel panels, assembled into a rigid structure and reinforced at the base and corners. The interior of the cabinet is fitted with four vertical slotted channels which accept shelf clips adjustable on 2" centers. DOORS Each door is fabricated of a single sheet of stainless steel, turned in 1-1/4" and hemmed on all four sides, and reinforced with a full height channel in the center. Each door is supported on three concealed hinges. Each pair of doors is equipped with a paracentric lock and handle connecting to locking bars which secure the doors at top, bottom and center. The handle has a built-in key lock. SHELVES Each shelf is formed of a single sheet of stainless steel, with all four sides turned down and in for rigidity. Shelf support clips fit into the slotted channels and are adjustable on 2" centers. STANDARD FORMED EDGES OPTION1 SINGLE REINFORCING ANGLE OPTION2 STATIONARY (-B) Raises Cabinet Off Floor. Adjustable Bullet Feet For Leveling SHELF SELECTION DOUBLE REINFORCING ANGLES MOBILE (-M) Permits Easy Movement Of Cabinets. LIMITED WAANTY: piper products warrants to the original purchaser parts and H-7 208