S C R E W C O M P R E S S O R S M A D E I N I T A L Y Choose quality. FIMA 1
AIR COMPRESSORS AND ACCESSORIES FIMA has been operating on the international market for over 15 years. Its staff has over 40 years of experience in the sector of compressed air. FIMA is able to constantly adapt to meet the most diverse and ever-changing market requirements, without ever forgetting its primary objective: offering a top quality product. A wide range of products is able to meet the requirements of the various sectors, from the diy market to the industrial market. FIMA products are made using top quality raw materials and components. Each product is tested during the various production steps, in accordance with the ISO 9001 quality standards. All Fima products are made in accordance with the applicable European directives and meet the requirements for a proper environmental-friendly plant management, for an efficient but especially sustainable development. Choosing a FIMA product reflects a strong technical know-how and the ability to understand a top quality product on behalf of the buyer. FIMA 3
index SCREW AIR COMPRESSORS 06 08 14 16 24 26 28 30 34 FIRE high performance FIRE construction benefits FIRE configuration FIRE belt drive MIG maximum performance MIG construction benefits MIG belt drive MIG direct drive Inverter technology FIMA 5
ire Choose quality with high performance, ease of use 5.5/100Hp Screw compressors FIRE and small footprint. FIMA screw compressors of the FIRE series were designed to ensure high performance, wide-ranging flexibility, ease of use, reduced overall dimensions and reliability over time. With power ratings from 5.5 Hp to 100 Hp and a wide choice of configurations, from the machine only [SCREW] to the complete station [SCREW+TANK+DRYER], the FIRE series turns out to be the best choice for a variety of applications both for craft shops and small-scale industry. The FIRE range is now enriched by inverter technology in the 15 Hp and 20 Hp power ratings. FIRE compact air end Electronic control system All components used are top quality and the special screw unit is compact, featuring a simple design but cutting-edge technical solutions, and is the beating heart of this range. Thermostatically controlled electrofan Warranty extension Maintenance kit Fima screw compressors are covered by ONE YEAR STANDARD WARRANTY with the option to extend it to TWO YEARS FULL WARRANTY only in case of regular maintenance using FIMA recommended genuine parts. MODEL Type KIT Code OIL quantity (Lt.) FIRE 5,5K 20K (ON-OFF and inverter) KIT F000520 10 FIRE 25K 30K KIT F002530 10 FIRE 40K 50K KIT F004050 20 Fire 75K 100K KIT F075100 23 Genuine parts for WARRANTY EXTENSION recommended every 2500 hours or once per year. KIT composition: one oil filter,one air filter, one separator filter and mineral oil. High performance Belt drive Power ratings from 5.5 Hp to 100 Hp FIRE 5,5K Small footprint Lenghts from 820 to 2040 mm Depths from 540 to 730 mm Heights from 750 to 1540 mm 6 FIMA FIMA 7
ire Choose quality of construction and 5.5/100Hp Belt Drive FIRE its benefits. Compact air end of contained 1 overall dimensions thanks to a simple and compact design granting high performance, great output and maximum reliability. Conceived for easy accessibility, all to-be maintained components are located in the right position for easy and fast replacement in case of need. Reduced connections and almost absence of piping system for fewer loading losses and energy saving. Premium efficiency electric motor 2 IE3 for energy saving and for an environmental-friendly usage. Transmission by belt longitudinal 3 ribbing to achieve high power transmission and high linear speed and pulley made in cast iron, guarantee a long life and a high yield in time. 4 Anti-vibration base. Sliding plate with manual 5 tensioner granting an optimal belts tensioning, reducing the belts wear and eventual vibrations. This system allows also quick and safe belt maintenance. The intake or unloader valve 6 controls the compression volume of the screw compressor. It is actuated by an hydraulic unloader piston. The unloader piston mechanism makes use of the pressure differential between the oil inlet and the outlet of the piston, with pressure reversal being controlled by a solenoid valve. The screw compressor unit is provided with a power source on/off control switch and a potentiometer which correlates movement of the hydraulic unloader piston with electric resistance, making the system suitable for automatic and remote control. 7 Separator tank. 8 Oil level. 9 10 Drain cock. High precision Danfoss pressure switch. 11 Large and efficient air filter. 12 SPIN-ON separator filter. 13 SPIN-ON oil filter. The Solenoid valve providing the 14 input for opening and closing the intake valve. 15 16 Minimum pressure valve. Scavenge line visor. Thermostatically controlled 17 electro-fan and oil radiator for ideal working temperature. 18 19 20 21 Air cooler. Fireproof, oilproof and sound absorbing material. Oil pressure gauge. Stop emergency button. User friendly electronic control 22 system operating the main functions of the compressor and constantly monitoring all the functional parameters for a correct usage of the machine. Fuses box provides overcurrent 23 protection, preserving the electrical system of the machine 13 17 18 12 14 15 16 4 1 6 9 8 11 3 7 FIRE 5,5K 19 5 2! 23 10 21 20 22 Start-delta starting (YA) from Hp 7,5. All the machines are equipped! with a sequence phase relay for the right electric motor rotation. 8 FIMA FIMA 9
10 FIMA FIMA 11
ire Belt Drive Screw compressors Scavenge line visor Dryer controller Transmission Condensate drain FIRE 30K 12 FIMA Danfoss pressure switch Air tank s metal plate FIMA 13
ire Choose the best layout for your application. 5.5/100Hp Belt Drive FIRE FIRE [ SCREW ] PAGE 16 FIRE [ SCREW + DRYER ] PAGE 17 FIRE [ SCREW + TANK ] PAGE 18 FIRE [ SCREW + TANK + DRYER ] PAGE 19 FIRE [ SCREW + INVERTER ] PAGE 21 FIRE [ SCREW + DRYER + INVERTER ] PAGE 21 FIRE [ SCREW + TANK + INVERTER ] PAGE 21 FIRE [ SCREW + TANK + DRYER + INVERTER ] PAGE 21 FIRE 7,5K/270E 14 FIMA FIMA 15
ire FIRE 8.10.13bar Belt Drive FIRE FIRE 8.10.13.Bar [ SCREW ] Belt Drive Screw compressors Model Power Tank Dryer Free Air Delivery Compressor Dryer Outlet BSP Max Noise Dimensions Weight FIRE F. A. D. Power supply Power supply Connection Pressure Level L x D x H Type Hp Kw Lt. L/Min CFM M3/h V/Hz V/Hz in Bar Psi db(a) mm Kg 5,5K-8 5,5 4 - - 560 19,78 33,6 400/50-1/2 8 116 65 820 x 540 x 750 138 5,5K-10 5,5 4 - - 450 15,89 27 400/50-1/2 10 145 65 820 x 540 x 750 138 5,5K-13 5,5 4 - - 400 14,13 24 400/50-1/2 13 188 65 820 x 540 x 750 138 7,5K-8 7,5 5,5 - - 820 28,96 49,2 400/50-1/2 8 116 66 820 x 540 x 750 143 7,5K-10 7,5 5,5 - - 720 25,43 43,2 400/50-1/2 10 145 66 820 x 540 x 750 143 7,5K-13 7,5 5,5 - - 640 22,60 38,4 400/50-1/2 13 188 66 820 x 540 x 750 143 10K-8 10 7,5 - - 950 33,55 57 400/50-1/2 8 116 67 820 x 540 x 750 148 10K-10 10 7,5 - - 860 30,37 51,6 400/50-1/2 10 145 67 820 x 540 x 750 148 10K-13 10 7,5 - - 690 24,37 41,4 400/50-1/2 13 188 67 820 x 540 x 750 148 15K-8 15 11 - - 1560 55,09 93,6 400/50-3/4 8 116 65 940 x 630 x 850 254 15K-10 15 11 - - 1430 50,50 85,8 400/50-3/4 10 145 65 940 x 630 x 850 254 15K-13 15 11 - - 1210 42,73 72,6 400/50-3/4 13 188 65 940 x 630 x 850 254 20K-8 20 15 - - 2010 70,98 120,6 400/50-3/4 8 116 67 940 x 630 x 850 280 20K-10 20 15 - - 1900 67,10 114 400/50-3/4 10 145 67 940 x 630 x 850 280 20K-13 20 15 - - 1670 58,98 100,2 400/50-3/4 13 188 67 940 x 630 x 850 280 25K-8 25 18,5 - - 2700 95,35 162 400/50-1 8 116 73 950 x 850 x 1180 468 25K-10 25 18,5 - - 2500 82,29 150 400/50-1 10 145 73 950 x 850 x 1180 468 25K-13 25 18,5 - - 2200 77,69 132 400/50-1 13 188 73 950 x 850 x 1180 468 30K-8 30 22 - - 3280 115,83 196,8 400/50-1 8 116 74 950 x 850 x 1180 498 30K-10 30 22 - - 2970 104,88 178,2 400/50-1 10 145 74 950 x 850 x 1180 498 30K-13 30 22 - - 2390 84,40 143,4 400/50-1 13 188 74 950 x 850 x 1180 498 40K-8 40 30 - - 4500 158,92 270 400/50-1 8 116 74 1200 x 890 x 1350 679 40K-10 40 30 - - 3900 137,73 234 400/50-1 10 145 74 1200 x 890 x 1350 679 40K-13 40 30 - - 3500 123,6 210 400/50-1 13 188 74 1200 x 890 x 1350 679 50K-8 50 37 - - 5350 188,93 321 400/50-1 8 116 75 1200 x 890 x 1350 700 50K-10 50 37 - - 5000 176,57 300 400/50-1 10 145 75 1200 x 890 x 1350 700 50K-13 50 37 - - 4200 148,32 252 400/50-1 13 188 75 1200 x 890 x 1350 700 75K-8 75 55 - - 8000 282,52 480 400/50-1.1/4 8 116 74 1680 x 1285 x 1640 1230 75K-10 75 55 - - 7900 278,98 474 400/50-1.1/4 10 145 74 1680 x 1285 x 1640 1230 75K-13 75 55 - - 7000 247,20 420 400/50-1.1/4 13 188 74 1680 x 1285 x 1640 1230 100K-8 100 75 - - 11000 388,46 660 400/50-1.1/4 8 116 76 1680 x 1285 x 1640 1230 100K-10 100 75 - - 10000 353,14 600 400/50-1.1/4 10 145 76 1680 x 1285 x 1640 1230 100K-13 100 75 - - 8500 300,17 510 400/50-1.1/4 13 188 76 1680 x 1285 x 1640 1230 8.10.13.Bar [ SCREW + DRYER ] Belt Drive Screw compressors Model Power Tank Dryer Free Air Delivery Compressor Dryer Outlet BSP Max Noise Dimensions Weight FIRE F. A. D. Power supply Power supply Connection Pressure Level L x D x H Type Hp Kw Lt. L/Min CFM M3/h V/Hz V/Hz in Bar Psi db(a) mm Kg 5,5K-8E 5,5 4 - E 560 19,78 33,6 400/50 230/50 1/2 8 116 65 1105 x 540 x 750 168 5,5K-10E 5,5 4 - E 450 15,89 27 400/50 230/50 1/2 10 145 65 1105 x 540 x 750 168 5,5K-13E 5,5 4 - E 400 14,13 24 400/50 230/50 1/2 13 188 65 1105 x 540 x 750 168 7,5K-8E 7,5 5,5 - E 820 28,96 49,2 400/50 230/50 1/2 8 116 66 1105 x 540 x 750 173 7,5K-10E 7,5 5,5 - E 720 25,43 43,2 400/50 230/50 1/2 10 145 66 1105 x 540 x 750 173 7,5K-13E 7,5 5,5 - E 640 22,60 38,4 400/50 230/50 1/2 13 188 66 1105 x 540 x 750 173 10K-8E 10 7,5 - E 950 33,55 57 400/50 230/50 1/2 8 116 67 1105 x 540 x 750 178 10K-10E 10 7,5 - E 860 30,37 51,6 400/50 230/50 1/2 10 145 67 1105 x 540 x 750 178 10K-13E 10 7,5 - E 690 24,37 41,4 400/50 230/50 1/2 13 188 67 1105 x 540 x 750 178 15K-8E 15 11 - E 1560 55,09 93,6 400/50 230/50 3/4 8 116 65 1215 x 630 x 850 290 15K-10E 15 11 - E 1430 50,50 85,8 400/50 230/50 3/4 10 145 65 1215 x 630 x 850 290 15K-13E 15 11 - E 1210 42,73 72,6 400/50 230/50 3/4 13 188 65 1215 x 630 x 850 290 20K-8E 20 15 - E 2010 70,98 120,6 400/50 230/50 3/4 8 116 67 1215 x 630 x 850 316 20K-10E 20 15 - E 1900 67,10 114 400/50 230/50 3/4 10 145 67 1215 x 630 x 850 316 20K-13E 20 15 - E 1670 58,98 100,2 400/50 230/50 3/4 13 188 67 1215 x 630 x 850 316 25K-8E 25 18,5 - E 2100 95,35 162 400/50 230/50 1 8 116 73 1170 x 850 x 1180 488 25K-10E 25 18,5 - E 2500 88,29 150 400/50 230/50 1 10 145 73 1170 x 850 x 1180 488 25K-13E 25 18,5 - E 2200 77,69 132 400/50 230/50 1 13 188 73 1170 x 850 x 1180 488 30K-8E 30 22 - E 3280 115,83 196,8 400/50 230/50 1 8 116 74 1170 x 850 x 1180 518 30K-10E 30 22 - E 2970 104,88 178,2 400/50 230/50 1 10 145 74 1170 x 850 x 1180 518 30K-13E 30 22 - E 2390 84,40 143,4 400/50 230/50 1 13 188 74 1170 x 850 x 1180 518 Dimensions : Lenght x Depth x Height Dimensions : Lenght x Depth x Height 16 FIMA FIMA 17
ire FIRE 8.10.13bar Belt Drive FIRE FIRE 8.10.13.Bar [ SCREW + TANK ] Belt Drive Screw compressors Model Power Tank Dryer Free Air Delivery Compressor Dryer Outlet BSP Max Noise Dimensions Weight FIRE F. A. D. Power supply Power supply Connection Pressure Level L x D x H Type Hp Kw Lt. L/Min CFM M3/h V/Hz V/Hz in Bar Psi db(a) mm Kg 5,5K-8/200 5,5 4 200-560 19,78 33,6 400/50-1/2 8 116 65 1525 x 540 x 1225 195 5,5K-10/200 5,5 4 200-450 15,89 27 400/50-1/2 10 145 65 1525 x 540 x 1225 195 5,5K-13/200 5,5 4 200-400 14,13 24 400/50-1/2 13 188 65 1525 x 540 x 1225 195 5,5K-8/270 5,5 4 270-560 19,78 33,6 400/50-1/2 8 116 65 1625 x 540 x 1250 205 5,5K-10/270 5,5 4 270-450 15,89 27 400/50-1/2 10 145 65 1625 x 540 x 1250 205 5,5K-13/270 5,5 4 270-400 14,13 24 400/50-1/2 13 188 65 1625 x 540 x 1250 205 7,5K-8/270 7,5 5,5 270-820 28,96 49,2 400/50-1/2 8 116 66 1625 x 540 x 1250 212 7,5K-10/270 7,5 5,5 270-720 25,43 43,2 400/50-1/2 10 145 66 1625 x 540 x 1250 212 7,5K-13/270 7,5 5,5 270-640 22,60 38,4 400/50-1/2 13 188 66 1625 x 540 x 1250 212 10K-8/270 10 7,5 270-950 33,55 57 400/50-1/2 8 116 67 1625 x 540 x 1250 217 10K-10/270 10 7,5 270-860 30,37 51,6 400/50-1/2 10 145 67 1625 x 540 x 1250 217 10K-13/270 10 7,5 270-690 24,37 41,4 400/50-1/2 13 188 67 1625 x 540 x 1250 217 15K-8/270 15 11 270-1560 55,09 93,6 400/50-3/4 8 116 65 1625 x 630 x 1300 325 15K-10/270 15 11 270-1430 50,50 85,8 400/50-3/4 10 145 65 1625 x 630 x 1300 325 15K-13/270 15 11 270-1210 42,73 72,6 400/50-3/4 13 188 65 1625 x 630 x 1300 325 20K-8/270 20 15 270-2010 70,98 120,6 400/50-3/4 8 116 67 1625 x 630 x 1300 351 20K-10/270 20 15 270-1900 67,10 114 400/50-3/4 10 145 67 1625 x 630 x 1300 351 20K-13/270 20 15 270-1670 58,98 100,2 400/50-3/4 13 188 67 1625 x 630 x 1300 351 7,5K-8/500 7,5 5,5 500-820 28,96 49,2 400/50-1/2 8 116 66 2030 x 540 x 1460 255 7,5K-10/500 7,5 5,5 500-720 25,43 43,2 400/50-1/2 10 145 66 2030 x 540 x 1460 255 7,5K-13/500 7,5 5,5 500-640 22,60 38,4 400/50-1/2 13 188 66 2030 x 540 x 1460 255 10K-8/500 10 7,5 500-950 33,55 57 400/50-1/2 8 116 67 2030 x 540 x 1460 260 10K-10/500 10 7,5 500-860 30,37 51,6 400/50-1/2 10 145 67 2030 x 540 x 1460 260 10K-13/500 10 7,5 500-690 24,37 41,4 400/50-1/2 13 188 67 2030 x 540 x 1460 260 15K-8/500 15 11 500-1560 55,09 93,6 400/50-3/4 8 116 65 2030 x 630 x 1430 349 15K-10/500 15 11 500-1430 50,50 85,8 400/50-3/4 10 145 65 2030 x 630 x 1430 349 15K-13/500 15 11 500-1210 42,73 72,6 400/50-3/4 13 188 65 2030 x 630 x 1430 349 20K-8/500 20 15 500-2010 70,98 120,6 400/50-3/4 8 116 67 2030 x 630 x 1430 392 20K-10/500 20 15 500-1900 67,10 114 400/50-3/4 10 145 67 2030 x 630 x 1430 392 20K-13/500 20 15 500-1670 58,98 100,2 400/50-3/4 13 188 67 2030 x 630 x 1430 392 25K-8/500 25 18,5 500-2700 95,35 162 400/50-1 8 116 73 2040 x 850 x 1770 670 25K-10/500 25 18,5 500-2500 88,29 150 400/50-1 10 145 73 2040 x 850 x 1770 670 25K-13/500 25 18,5 500-2200 77,69 132 400/50-1 13 188 73 2040 x 850 x 1770 670 30K-8/500 30 22 500-3280 115,83 196,8 400/50-1 8 116 74 2040 x 850 x 1770 700 30K-10/500 30 22 500-2970 104,88 178,2 400/50-1 10 145 74 2040 x 850 x 1770 700 30K-13/500 30 22 500-2390 84,4 143,4 400/50-1 13 188 74 2040 x 850 x 1770 700 Dimensions : Lenght x Depth x Height 8.10.13.Bar [ SCREW + TANK + DRYER ] Belt Drive Screw compressors Model Power Tank Dryer Free Air Delivery Compressor Dryer Outlet BSP Max Noise Dimensions Weight FIRE F. A. D. Power supply Power supply Connection Pressure Level L x D x H Type Hp Kw Lt. L/Min CFM M3/h V/Hz V/Hz in Bar Psi db(a) mm Kg 5,5K-8/200E 5,5 4 200 E 560 19,78 33,6 400/50 230/50 1/2 8 116 65 1525 x 540 x 1225 225 5,5K-10/200E 5,5 4 200 E 450 15,89 27 400/50 230/50 1/2 10 145 65 1525 x 540 x 1225 225 5,5K-13/200E 5,5 4 200 E 400 14,13 24 400/50 230/50 1/2 13 188 65 1525 x 540 x 1225 225 5,5K-8/270E 5,5 4 270 E 560 19,78 33,6 400/50 230/50 1/2 8 116 65 1625 x 540 x 1250 235 5,5K-10/270E 5,5 4 270 E 450 15,89 27 400/50 230/50 1/2 10 145 65 1625 x 540 x 1250 235 5,5K-13/270E 5,5 4 270 E 400 14,13 24 400/50 230/50 1/2 13 188 65 1625 x 540 x 1250 235 7,5K-8/270E 7,5 5,5 270 E 820 28,96 49,2 400/50 230/50 1/2 8 116 66 1625 x 540 x 1250 242 7,5K-10/270E 7,5 5,5 270 E 720 25,43 43,2 400/50 230/50 1/2 10 145 66 1625 x 540 x 1250 242 7,5K-13/270E 7,5 5,5 270 E 640 22,60 38,4 400/50 230/50 1/2 13 188 66 1625 x 540 x 1250 242 10K-8/270E 10 7,5 270 E 950 33,55 57 400/50 230/50 1/2 8 116 67 1625 x 540 x 1250 247 10K-10/270E 10 7,5 270 E 860 30,37 51,6 400/50 230/50 1/2 10 145 67 1625 x 540 x 1250 247 10K-13/270E 10 7,5 270 E 690 24,37 41,4 400/50 230/50 1/2 13 188 67 1625 x 540 x 1250 247 15K-8/270E 15 11 270 E 1560 55,09 93,6 400/50 230/50 3/4 8 116 65 1625 x 630 x 1300 361 15K-10/270E 15 11 270 E 1430 50,50 85,8 400/50 230/50 3/4 10 145 65 1625 x 630 x 1300 361 15K-13/270 15 11 270 E 1210 42,73 72,6 400/50 230/50 3/4 13 188 65 1625 x 630 x 1300 361 20K-8/270E 20 15 270 E 2010 70,98 120,6 400/50 230/50 3/4 8 116 67 1625 x 630 x 1300 387 20K-10/270E 20 15 270 E 1900 67,10 114 400/50 230/50 3/4 10 145 67 1625 x 630 x 1300 387 20K-13/270E 20 15 270 E 1670 58,98 100,2 400/50 230/50 3/4 13 188 67 1625 x 630 x 1300 387 7,5K-8/500E 7,5 5,5 500 E 820 28,96 49,2 400/50 230/50 3/4 8 116 66 2030 x 540 x 1460 290 7,5K-10/500E 7,5 5,5 500 E 720 25,43 43,2 400/50 230/50 3/4 10 145 66 2030 x 540 x 1460 290 7,5K-13/500E 7,5 5,5 500 E 640 22,60 38,4 400/50 230/50 3/4 13 188 66 2030 x 540 x 1460 290 10K-8/500E 10 7,5 500 E 950 33,55 57 400/50 230/50 1/2 8 116 67 2030 x 540 x 1460 295 10K-10/500E 10 7,5 500 E 860 30,37 51,6 400/50 230/50 1/2 10 145 67 2030 x 540 x 1460 295 10K-13/500E 10 7,5 500 E 690 24,37 41,4 400/50 230/50 1/2 13 188 67 2030 x 540 x 1460 295 15K-8/500E 15 11 500 E 1560 55,09 93,6 400/50 230/50 3/4 8 116 65 2030 x 630 x 1430 385 15K-10/500E 15 11 500 E 1430 50,50 85,8 400/50 230/50 3/4 10 145 65 2030 x 630 x 1430 385 15K-13/500E 15 11 500 E 1210 42,73 72,6 400/50 230/50 3/4 13 188 65 2030 x 630 x 1430 385 20K-8/500E 20 15 500 E 2010 70,98 120,6 400/50 230/50 3/4 8 116 67 2030 x 630 x 1430 428 20K-10/500E 20 15 500 E 1900 67,10 114 400/50 230/50 3/4 10 145 67 2030 x 630 x 1430 428 20K-13/500E 20 15 500 E 1670 58,98 100,2 400/50 230/50 3/4 13 188 67 2030 x 630 x 1430 428 25K-8/500E 25 18,5 500 E 2700 95,35 162 400/50 230/50 1 8 116 73 2040 x 850 x 1770 690 25K-10/500E 25 18,5 500 E 2500 88,29 150 400/50 230/50 1 10 145 73 2040 x 850 x 1770 690 25K-13/500E 25 18,5 500 E 2200 77,69 132 400/50 230/50 1 13 188 73 2040 x 850 x 1770 690 30K-8/500E 30 22 500 E 3280 115,83 196,8 400/50 230/50 1 8 116 74 2040 x 850 x 1770 720 30K-10/500E 30 22 500 E 2970 104,88 178,2 400/50 230/50 1 10 145 74 2040 x 850 x 1770 720 30K-13/500E 30 22 500 E 2390 84,4 143,4 400/50 230/50 1 13 188 74 2040 x 850 x 1770 720 Dimensions : Lenght x Depth x Height 18 FIMA FIMA 19
ire Inverter technology for energy saving. FIRE 8.10.13.Bar [ SCREW + INVERTER ] Belt Drive Screw compressors Model Power Tank Dryer Free Air Delivery Free Air Delivery Compressor Dryer Outlet BSP Max Noise Dimensions Weight MIG F. A. D. Min F. A. D. Max Power supply Power supply Connection Pressure Level L x D x H Type Hp Kw L/Min CFM L/Min CFM V/Hz V/Hz in Bar Psi db(a) mm Kg 15K-8 IVR 15 11 - - 320 11,30 1560 55,09 400/50-3/4 8 116 65 1100 x 730 x 935 280 15K-10 IVR 15 11 - - 300 10,59 1430 50,50 400/50-3/4 10 145 65 1100 x 730 x 935 280 15K-13 IVR 15 11 - - 260 9,18 1210 42,73 400/50-3/4 13 188 65 1100 x 730 x 935 280 20K-8 IVR 20 15 - - 340 12,01 2010 70,98 400/50-3/4 8 116 67 1100 x 730 x 935 310 20K-10 IVR 20 15 - - 320 11,30 1900 67,10 400/50-3/4 10 145 67 1100 x 730 x 935 310 20K-13 IVR 20 15 - - 280 9,89 1670 58,98 400/50-3/4 13 188 67 1100 x 730 x 935 310 FIRE 8.10.13.Bar [ SCREW + DRYER + INVERTER ] Belt Drive Screw compressors Model Power Tank Dryer Free Air Delivery Free Air Delivery Compressor Dryer Outlet BSP Max Noise Dimensions Weight MIG F. A. D. Min F. A. D. Max Power supply Power supply Connection Pressure Level L x D x H Type Hp Kw L/Min CFM L/Min CFM V/Hz V/Hz in Bar Psi db(a) mm Kg 15K-8E IVR 15 11 - E 320 11,30 1560 55,09 400/50 230/50 3/4 8 116 65 1375 x 730 x 935 320 15K-10E IVR 15 11 - E 300 10,59 1430 50,50 400/50 230/50 3/4 10 145 65 1375 x 730 x 935 320 15K-13E IVR 15 11 - E 260 9,18 1210 42,73 400/50 230/50 3/4 13 188 65 1375 x 730 x 935 320 20K-8E IVR 20 15 - E 340 12,01 2010 70,98 400/50 230/50 3/4 8 116 67 1375 x 730 x 935 345 20K-10E IVR 20 15 - E 320 11,30 1900 67,10 400/50 230/50 3/4 10 145 67 1375 x 730 x 935 345 20K-13E IVR 20 15 - E 280 9,89 1670 58,98 400/50 230/50 3/4 13 188 67 1375 x 730 x 935 345 FIRE 8.10.13.Bar [ SCREW + TANK + INVERTER ] Belt Drive Screw compressors Model Power Tank Dryer Free Air Delivery Free Air Delivery Compressor Dryer Outlet BSP Max Noise Dimensions Weight MIG F. A. D. Min F. A. D. Max Power supply Power supply Connection Pressure Level L x D x H Type Hp Kw L/Min CFM L/Min CFM V/Hz V/Hz in Bar Psi db(a) mm Kg 15K-8/500 IVR 15 11 500-320 11,30 1560 55,09 400/50-3/4 8 116 65 2040 x 730 x 1540 385 15K-10/500 IVR 15 11 500-300 10,59 1430 50,50 400/50-3/4 10 145 65 2040 x 730 x 1540 385 15K-13/500 IVR 15 11 500-260 9,18 1210 42,73 400/50-3/4 13 188 65 2040 x 730 x 1540 385 20K-8/500 IVR 20 15 500-340 12,01 2010 70,98 400/50-3/4 8 116 67 2040 x 730 x 1540 430 20K-10/500 IVR 20 15 500-320 11,30 1900 67,10 400/50-3/4 10 145 67 2040 x 730 x 1540 430 20K-13/500 IVR 20 15 500-280 9,89 1670 58,98 400/50-3/4 13 188 67 2040 x 730 x 1540 430 FIRE 20K/500E IVR FIRE 8.10.13.Bar [ SCREW + TANK + DRYER + INVERTER ] Belt Drive Screw compressors Model Power Tank Dryer Free Air Delivery Free Air Delivery Compressor Dryer Outlet BSP Max Noise Dimensions Weight A variable speed drive (VSD) or inverter system is one of the most effective ways of saving energy, frequently providing energy savings of 30% or more in compressor applications. The FIRE range is now enriched by inverter technology in the 15 Hp and 20 Hp power ratings. MIG F. A. D. Min F. A. D. Max Power supply Power supply Connection Pressure Level L x D x H Type Hp Kw L/Min CFM L/Min CFM V/Hz V/Hz in Bar Psi db(a) mm Kg 15K-8/500E IVR 15 11 500 E 320 11,30 1560 55,09 400/50 230/50 3/4 8 116 65 2040 x 730 x 1540 430 15K-10/500E IVR 15 11 500 E 300 10,59 1430 50,50 400/50 230/50 3/4 10 145 65 2040 x 730 x 1540 430 15K-13/500E IVR 15 11 500 E 260 9,18 1210 42,73 400/50 230/50 3/4 13 188 65 2040 x 730 x 1540 430 20K-8/500E IVR 20 15 500 E 340 12,01 2010 70,98 400/50 230/50 3/4 8 116 67 2040 x 730 x 1540 485 20K-10/500E IVR 20 15 500 E 320 11,30 1900 67,10 400/50 230/50 3/4 10 145 67 2040 x 730 x 1540 485 20K-13/500E IVR 20 15 500 E 280 9,89 1670 58,98 400/50 230/50 3/4 13 188 67 2040 x 730 x 1540 485 Dimensions : Lenght x Depth x Height 20 FIMA FIMA 21
Power unit FIMA 22 FIMA 23
ig Choose quality with maximum performance without compromise. 10/125Hp Screw compressors MIG Belt drive Power ratings from 10 Hp to 60 Hp Direct drive Power ratings from 75 Hp to 125 Hp FIMA screw compressors of the MIG series ensure maximum performance without compromise. have placed this series at the top of this category. The MIG series is available in the belt drive version with power ratings from 10 Hp to 60 Hp, and in the direct drive version with power ratings from 75 Hp to 125 Hp. Machines also come with the inverter system, ideal for increasing efficiency by optimizing energy consumption. Electronic control system MIG air end Our fixed-workstation production system allows us to ensure maximum precision and accuracy in machine assembly. Ongoing research and development, the use of selected high-grade quality components and the attention to detail Thermostatically controlled radial electrofan Warranty extension Fima screw compressors are covered by ONE YEAR STANDARD WARRANTY with the option to extend it to TWO YEARS FULL WARRANTY only in case of regular maintenance using FIMA recommended genuine parts. Maintenance kit MODEL Type KIT Code OIL quantity (Lt.) MIG 10K 15K KIT M001015 10 MIG 20K KIT M000020 10 MIG 25K 30K KIT M002530 20 MIG 40K 50K (ON-OFF and inverter) KIT M004050 30 MIG 60K (ON-OFF and inverter) KIT M000060 30 MIG 75K (ON-OFF and inverter) KIT M000075 60 MIG 100K 125K (ON-OFF and inverter) KIT M100125 60 MIG 30K Genuine parts for WARRANTY EXTENSION recommended every 2500 hours or once per year. KIT composition: one oil filter,one air filter, one separator filter and mineral oil. 24 FIMA FIMA 25
ig Choose quality of construction and 10/125Hp Screw compressors MIG its benefits. 18 Oil injected screw air end with 1 high volumetric output, low power consumption, reduced noise and low vibration. Premium efficiency electric motor 2 IE3 for energy saving and for an environmental-friendly usage. Belt driven transmission performed by Poly-V belts ensuring 3 long life and minimum maintenance. Pneumatically controlled butterfly 12 regulator with incorporated automatic non return valve, adjusting compressor working, reducing capacity then the air consumption and consequently the energy cost. 13 14 15 Solenoid valve. Minimum pressure valve. Scavenge line visor. Industrial-grade controller featuring a modern LCD display 22 with Easy-To-Use user interface, monitoring the main operating parameters through intuitive icons. Trip data log, convenient maintenance organizer, remote control and master/slave feature, guarantee constant efficiency, reliability and a flexible use of FIMA MIG screw compressors. 23 Base for easy moving. 22 21 20 9 10 11 15 14 1 13 12 19 5 4 Anti-vibration base. Automatic belt tensioner from 5 MIG 10K to MIG 30K and manual belt tensioner from MIG 40K to MIG 60K. 6 7 8 9 10 11 Separator tank. Oil level. Drain cock. Large and efficient air filter. SPIN-ON separator filter. SPIN-ON oil filter. 16 Temperature sensor. Thermostatically controlled radial 17 electrofan for ideal working temperature also in extreme working conditions. Its advanced design guarantees high performance and a low noise level. 18 19 20 21 Air-oil radiator. Sound absorbing, oil-proof and fireproof panel. Pressure gauge. Stop emergency button. 23 17 7 6 16 2 4 3 8 MIG 30K 26 FIMA FIMA 27
ig 8.10.13bar Belt Drive MIG MIG 8.10.13.Bar Belt Drive Screw compressors MIG 8.10.13.Bar INVERTER Belt Drive Screw compressors Model Power Free Air Delivery Power Outlet BSP Max Noise Dimensions Weight MIG F. A. D. supply Connection Pressure Level L x D x H Type Hp Kw L/Min CFM M3/h V/Hz in Bar Psi db(a) mm Kg 10K-8 10 7,5 1200 42,38 72 400/50 3/4 8 116 65 930 x 695 x 1120 278 10K-10 10 7,5 1020 36,02 61,2 400/50 3/4 10 145 65 930 x 695 x 1120 278 10K-13 10 7,5 810 28,60 48,6 400/50 3/4 13 188 65 930 x 695 x 1120 278 15K-8 15 11 1650 58,27 99 400/50 3/4 8 116 67 930 x 695 x 1120 283 15K-10 15 11 1500 52,97 90 400/50 3/4 10 145 67 930 x 695 x 1120 283 15K-13 15 11 1170 41,31 70,2 400/50 3/4 13 188 67 930 x 695 x 1120 283 20K-8 20 15 2400 84,75 144 400/50 3/4 8 116 68 930 x 695 x 1120 288 20K-10 20 15 2035 71,86 122,1 400/50 3/4 10 145 68 930 x 695 x 1120 288 20K-13 20 15 1770 62,51 106,2 400/50 3/4 13 188 68 930 x 695 x 1120 288 25K-8 25 18,5 2860 101 171,6 400/50 1 8 116 66 1215 x 870 x 1300 415 25K-10 25 18,5 2520 89 151,2 400/50 1 10 145 66 1215 x 870 x 1300 415 25K-13 25 18,5 2020 71,33 121,2 400/50 1 13 188 66 1215 x 870 x 1300 415 30K-8 30 22 3360 118,66 201,6 400/50 1 8 116 67 1215 x 870 x 1300 435 30K-10 30 22 3050 107,71 183 400/50 1 10 145 67 1215 x 870 x 1300 435 30K-13 30 22 2430 85,81 145,8 400/50 1 13 188 67 1215 x 870 x 1300 435 40K-8 40 30 4780 168,80 286,8 400/50 1.1/4 8 116 65 1500 x 1000 x 1450 707 40K-10 40 30 4110 145,14 246,6 400/50 1.1/4 10 145 65 1500 x 1000 x 1450 707 40K-13 40 30 3720 131,37 223,2 400/50 1.1/4 13 188 65 1500 x 1000 x 1450 707 50K-8 50 37 5670 200,23 340,2 400/50 1.1/4 8 116 65 1500 x 1000 x 1450 715 50K-10 50 37 5120 180,81 307,2 400/50 1.1/4 10 145 65 1500 x 1000 x 1450 715 50K-13 50 37 4460 157,50 267,6 400/50 1.1/4 13 188 65 1500 x 1000 x 1450 715 60K-8 60 45 6850 241,90 411 400/50 1.1/4 8 116 65 1500 x 1000 x 1450 778 60K-10 60 45 6190 218,60 371,4 400/50 1.1/4 10 145 65 1500 x 1000 x 1450 778 60K-13 60 45 5530 195,29 331,8 400/50 1.1/4 13 188 65 1500 x 1000 x 1450 778 75K-8 75 55 9100 321,36 546 400/50 1.1/2 8 116 73 2200 x 1450 x 1990 1720 75K-10 75 55 8150 287,81 489 400/50 1.1/2 10 145 73 2200 x 1450 x 1990 1720 75K-13 75 55 7400 261,33 444 400/50 1.1/2 13 188 73 2200 x 1450 x 1990 1720 100K-8 100 75 12700 448,49 762 400/50 1.1/2 8 116 75 2200 x 1450 x 1990 1820 100K-10 100 75 10300 363,74 618 400/50 1.1/2 10 145 75 2200 x 1450 x 1990 1820 100K-13 100 75 8950 316,06 537 400/50 1.1/2 13 188 75 2200 x 1450 x 1990 1820 125K-8 125 90 13700 483,81 822 400/50 1.1/2 8 116 75 2200 x 1450 x 1990 1920 125K-10 125 90 13000 459,09 780 400/50 1.1/2 10 145 75 2200 x 1450 x 1990 1920 125K-13 125 90 11800 416,71 708 400/50 1.1/2 13 188 75 2200 x 1450 x 1990 1920 Dimensions : Lenght x Depth x Height Model Power Free Air Delivery Min Free Air Delivery Max Power Outlet BSP Max Noise Dimensions Weight MIG F. A. D. F. A. D. supply Connection Pressure Level L x D x H Type Hp Kw L/Min CFM L/Min CFM V/Hz in Bar Psi db(a) mm Kg 25K-8 IVR 25 18,5 820 28,96 2900 102,41 400/50 1 8 116 66 1215 x 870 x 1300 523 25K-10 IVR 25 18,5 780 27,55 2540 89,70 400/50 1 10 145 66 1215 x 870 x 1300 523 25K-13 IVR 25 18,5 750 26,49 2120 74,87 400/50 1 13 188 66 1215 x 870 x 1300 523 30K-8 IVR 30 22 860 30,37 3400 120,07 400/50 1 8 116 67 1215 x 870 x 1300 543 30K-10 IVR 30 22 810 28,60 3120 110,18 400/50 1 10 145 67 1215 x 870 x 1300 543 30K-13 IVR 30 22 780 27,55 2670 94,29 400/50 1 13 188 67 1215 x 870 x 1300 543 40K-8 IVR 40 30 1715 60,56 4900 173,04 400/50 1.1/4 8 116 65 1500 x 1000 x 1450 963 40K-10 IVR 40 30 1620 57,21 4370 154,32 400/50 1.1/4 10 145 65 1500 x 1000 x 1450 963 40K-13 IVR 40 30 1430 50,50 3770 133,14 400/50 1.1/4 13 188 65 1500 x 1000 x 1450 963 50K-8 IVR 50 37 2140 75,57 6085 214,89 400/50 1.1/4 8 116 65 1500 x 1000 x 1450 971 50K-10 IVR 50 37 1940 68,51 5530 195,29 400/50 1.1/4 10 145 65 1500 x 1000 x 1450 971 50K-13 IVR 50 37 1830 64,63 4800 169,51 400/50 1.1/4 13 188 65 1500 x 1000 x 1450 971 60K-8 IVR 60 45 2600 91,82 7400 261,33 400/50 1.1/4 8 116 65 1500 x 1000 x 1450 1033 60K-10 IVR 60 45 2400 84,75 6500 229,54 400/50 1.1/4 10 145 65 1500 x 1000 x 1450 1033 60K-13 IVR 60 45 2100 74,16 5500 194,23 400/50 1.1/4 13 188 65 1500 x 1000 x 1450 1033 75K-8 IVR 75 55 2560 90,41 9100 321,36 400/50 1.1/2 8 116 73 2200 x 1450 x 1990 1750 75K-10 IVR 75 55 2950 104,18 8150 287,81 400/50 1.1/2 10 145 73 2200 x 1450 x 1990 1750 75K-13 IVR 75 55 3470 122,54 7400 261,33 400/50 1.1/2 13 188 73 2200 x 1450 x 1990 1750 100K-8 IVR 100 75 3600 127,13 12700 448,49 400/50 1.1/2 8 116 75 2200 x 1450 x 1990 1850 100K-10 IVR 100 75 3700 130,66 10300 363,74 400/50 1.1/2 10 145 75 2200 x 1450 x 1990 1850 100K-13 IVR 100 75 4200 148,32 8950 316,06 400/50 1.1/2 13 188 75 2200 x 1450 x 1990 1850 125K-8 IVR 125 90 3600 127,13 13700 483,81 400/50 1.1/2 8 116 75 2200 x 1450 x 1990 1950 125K-10 IVR 125 90 3700 130,66 13000 459,09 400/50 1.1/2 10 145 75 2200 x 1450 x 1990 1950 125K-13 IVR 125 90 4200 148,32 11800 416,71 400/50 1.1/2 13 188 75 2200 x 1450 x 1990 1950 Dimensions : Lenght x Depth x Height Safety valve 28 FIMA FIMA 29
ig 8.10.13bar Direct Drive MIG MIG 8.10.13.Bar Direct Drive Screw compressors Model Power Free Air Delivery Power Outlet BSP Max Noise Dimensions Weight MIG F. A. D. supply Connection Pressure Level L x D x H Type Hp Kw L/Min CFM M3/h V/Hz in Bar Psi db(a) mm Kg 75K-8 D 75 55 9000 317,83 540 400/50 1.1/2 8 116 72 2200 x 1100 x 1950 1550 75K-10 D 75 55 8050 284,28 483 400/50 1.1/2 10 145 72 2200 x 1100 x 1950 1550 75K-13 D 75 55 7300 257,80 438 400/50 1.1/2 13 188 72 2200 x 1100 x 1950 1550 100K-8 D 100 75 12600 444,96 756 400/50 1.1/2 8 116 73 2200 x 1100 x 1950 1750 100K-10 D 100 75 10200 360,21 612 400/50 1.1/2 10 145 73 2200 x 1100 x 1950 1750 100K-13 D 100 75 8850 312,53 531 400/50 1.1/2 13 188 73 2200 x 1100 x 1950 1750 125K-8 D 125 90 16000 565,03 960 400/50 1.1/2 8 116 75 2200 x 1100 x 1950 1850 125K-10 D 125 90 14200 501,47 852 400/50 1.1/2 10 145 75 2200 x 1100 x 1950 1850 Dimensions : Lenght x Depth x Height MIG 8.10.13.Bar INVERTER Direct Drive Screw compressors Model Power Free Air Delivery Min Free Air Delivery Max Power Outlet BSP Max Noise Dimensions Weight MIG F. A. D. F. A. D. supply Connection Pressure Level L x D x H Type Hp Kw L/Min CFM L/Min CFM V/Hz in Bar Psi db(a) mm Kg 75K-8 D IVR 75 55 2950 104,18 9000 317,83 400/50 1.1/2 8 116 72 2200 x 1100 x 1950 1600 75K-10 D IVR 75 55 2830 99,94 8050 284,28 400/50 1.1/2 10 145 72 2200 x 1100 x 1950 1600 75K-13 D IVR 75 55 2710 95,70 7300 257,80 400/50 1-1/2 13 188 72 2200 x 1100 x 1950 1600 100K-8 D IVR 100 75 2970 104,88 12600 444,96 400/50 1-1/2 8 116 73 2200 x 1100 x 1950 1800 100K-10 D IVR 100 75 2850 100,65 10200 360,21 400/50 1.1/2 10 145 73 2200 x 1100 x 1950 1800 100K-13 D IVR 100 75 2780 98,17 8850 312,53 400/50 1.1/2 13 188 73 2200 x 1100 x 1950 1800 125K-8 D IVR 125 90 2850 100,65 14000 494,40 400/50 1.1/2 8 116 75 2200 x 1100 x 1950 1900 125K-10 D IVR 125 90 2791 98,56 13000 459,09 400/50 1.1/2 10 145 75 2200 x 1100 x 1950 1900 Dimensions : Lenght x Depth x Height MIG 100K 30 FIMA FIMA 31
Thermostatically controlled radial electrofan Control panel Condensate drain Direct drive Intake grid ABB contactors Oil level Oil separator tank Electrical cabinet Labels FIMA 32 FIMA 33 Air end Handle
nverter Choose quality with efficient ABB VSD control system. The traditional way of controlling a compressor is by running the motor at full speed and then stopping it when the air has been compressed to the correct pressure. A variable speed drive (VSD) or INVERTER control reduces the energy output of a compressor, by controlling the speed of the motor, ensuring it runs no faster than necessary. Available on Fire and Mig series Direct energy savings of 15-35% can be achieved through lower consumption at partial loads. Accurate control also means that lower discharge pressures can be used. Reducing system pressure from 7 to 6 bar, for example, reduces energy consumption by 7%. Other benefits include stable system pressure through rapid reaction to pressure changes, typically within 0.1 bar; smooth starting which means no peak current penalties, less stress on mechanical parts and unlimited start-ups; and a fixed power factor. A variable speed drive (VSD) or INVERTER system is one of the most effective ways of saving energy, frequently providing energy savings of 30% or more in compressor applications. The major advantage of VSD control is that compressed air production precisely follows variations in demand. 34 FIMA FIMA 35
Piston compressors, screw compressors and compressed air accessories. A wide range of Made in Italy products absolutely match each customer s need from the simplest to the most complicated. The fast responses to the customers, the accuracy with which every single product is manufactured and tested, the quick and positive reaction to any particular client s demand, even out of FIMA standard, make of the whole FIMA production the right choice and the right reply to the customer s compressed air daily needs. Fima genuine parts Original spare parts ensure optimum air compressors performance. They are more than a simple new for old replacement and can substantially improve the performance of your equipment. Our commitment to continuous improvement often allows us to supply parts with improved features over the original, thus enhancing the performance of the equipment. Original spare parts are machined to the correct profiles, tolerances and clearances to give a perfect fit first time, every time. This, together with parts interchangeability offers: Reduced downtime for maintenance Reduction of spare part inventories High equipment performance Parts traceability and compliance Fast, reliable, single-source delivery All parts for FIMA products, from bearings and gaskets to rings and valves, are always available in our stock. Our consolidated warehousing and advanced logistics grant quick deliveries of parts. All rights reserved Unless otherwise indicated, all materials on this catalogue are property of Fima. No part of these pages, either text or images may be used for any purpose other than consultation and promotion. Therefore, reproduction, modification, storage in a retrieval system or retransmission, in any form or by any means, electronic, mechanical or otherwise, for reasons other than consultation and promotion, is strictly prohibited without prior written permission by Fima. In the interest of product improvement or other reason, Fima reserved the right to change specifications without prior notice or obligation. You are kindly invited to verify the characteristics through Fima distributors. FIMA S.r.L. Via P. Gobetti, 17/2 40055 Castenaso (Bo) Italy Tel. +39 051 5875263 Fax +39 051 5875455 info@fimacompressors.com www.fimacompressors.com
38 FIMA PRINTED_07.2016 ARLETTI.IT