Cast Iron Liquid Relief Valves

Similar documents
Model descriptions. 2. For other pressure and temperature limits, consult ANSI B16 cast iron flange standards.

Kunkle Models 91/218/228 liquid relief valves Safety and relief products

Kunkle Models 91/218/228 liquid relief valves Safety and relief products

Model descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:

KUNKLE MODELS 19/19M/20/20M/20P/20MP/200A/200H LIQUID RELIEF VALVES SAFETY AND RELIEF PRODUCTS

Kunkle Safety and Relief Products. Series 6000

Kunkle Safety and Relief Products

Safety and Relief Valves Product Overview

61W - Wafer style resilient seated butterfly valves 61L - Lugged style resilient seated butterfly valves

Crosby Style JQ Pressure Relief Device. Flow Control

Double door, spring loaded, wafer check valve designed to protect your gas or liquid piping systems.

Anderson Greenwood Series 5100 Pilot Operated Pressure Relief Valves

Anderson Greenwood MLCP. Modulating Large Capacity Pilot Valve

Direct contact, metal-to-metal seating, make the gate valve ideal for most shut-off applications. Class 800 ANSI.

Cash Valve. Type G-60. High Capacity Pressure Regulator. Flow Control. Issued - February 2001 CAVMC-0511-US-0609 ISO 9001 Certified

Double block and bleed style stainless steel butterfly valve sizes 1" to 6" [25 mm to 150 mm]. F250D for imperial tubing F251D for metric tubing

Cash Valve. A Series. Pressure Regulators. Flow Control. Issued - January 2001 CAVMC-0508-US-0609 ISO 9001 Certified

Spring return pneumatic quarter-turn actuator for spring end torques to 685,500 lb.in.

Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/

ANDERSON GREENWOOD. Flow Control. Anderson Greenwood Tank and Equipment Blanketing Systems. Pad Valves. De-Pad Valves. Total Flow Control Solutions

310 Wafer high performance butterfly valve 312 Lugged high performance butterfly valve

Models 912, 913, 918, 919 ASME Section VIII, Steam/Air/Gas/Liquid, UV National Board Certified. Also available for Vacuum Service.

Model descriptions. Technical data. Pressure and Temperature Limits Model 6252: 10 to 250 psig [0.7 to 17.2 barg] -20 to 406 F [-28 to 208 C]

ANDERSON GREENWOOD. Before installation these instructions must be fully read and understood.

Keystone Hygienic Products Figure 267J/268J (Reversible) Single Seal Piston Valves

Prince Wafer Swing Check Valves Sizes 2 thru 36

Crosby Series 800 and 900 OMNI-TRIM Pressure Relief Valves. Flow Control

KunKle SAFETY AND RELIEF VALVE PRODUCTS OVERVIEW

Crosby Series BP OMNI-TRIM Pressure Relief Valves for applications involving variable back pressure.

KUNKLE Safety and Relief ValVe PRoductS overview

Kunkle Models 189/363/389 safety valves Safety and relief products

Kunkle Safety and Relief Products Models 6252 and 6254

A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves.

Flow Control. Before installation or maintenance, these instructions must be fully read and understood.

PDC Elastomer Lined Series 27 Butterfly Valve 2" thru 36" for 125/150 lb. Flanging

Pressure Relief Valves Series. Consolidated Safety Valve

Consolidated* Valves 1511 Series Safety Valve

A self-contained system, the 7100 Series ARC valve has a pressure reducing trim and is in-line repairable.

* Contact your sales representative for compliance to NACE MR or later requirements.

394C. Series 6400/6600. Safety Valves for Power Boiler Service

* Contact your sales representative for compliance to NACE MR or later requirements.

KINGSTON. Model 710. Side Outlet Safety Relief Valve. Manufacturing reliable industrial valves for industry since 1908.

Spring loaded Thermal Relief Safety Valves, manufacturers standard Medium and high pressure

K-LOK Installation, Operation, Maintenance and Troubleshooting

197C. Valve Group. Series Farris Engineering Pressure Relief Valves

Designed for blow-off service in boiler systems with pressures of 3,206 psig.

MILLCENTRIC FULL/100% POR T ECCENTRIC PLUG VALVE

RP-1350 Rev. 1. Parts List. Model 441-S Regulator. Parts List. Copyright 1999 Invensys Energy Metering

67 Series Pressure Regulators

CLOW CANADA - M-67 HERITAGE BRIGADIER FIRE HYDRANT SPECIFICATION

Morin Figure HP Actuator

ISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901

Model-1 Natural Gas Valves

Industrial Bronze and Iron Price List

Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve

GRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description

Approved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81

KENNEDY VALVE KS-RW RESILIENT WEDGE VALVES

Model descriptions. Applications

516509_tabs 11/16/10 4:55 AM Page 1 FIRE HYDRANTS

January 2016 GLOBE VALVES MIXING & DIVERTING SERIES 8600 MODEL Previously manufactured by Dezurik and Honeywell

A-C Fire Pump. Fitting and Accessories A-C 100A

P200 Pressure Regulator

Type 441 CATALOG. Flanged Safety Relief Valves. The-Safety-Valve.com

Installation and Maintenance Instructions for Grinnell GRP Pneumatic Rack and Pinion Actuators

T200 Pressure Regulator

Industrial Bronze and Iron Price List

Installation Operation and Maintenance Instructions Model Contents

Model DFLP Linear Actuator

Direct contact, metal-to-metal seating, make the gate valve ideal for most shutoff applications. Class 800 ANSI.

P3M3H, P6M3H 3-VALVE HARD SEAT MANIFOLD

9100 SERIES Flanged MERCER VALVE THINK...MERCER FIRST

P3M5S, P4M5S, P6M5S 5-VALVE SOFT SEAT MANIFOLD

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List

Industrial Bronze and Iron Price List

P200 Pressure Regulator

P200 Pressure Regulator

Index. Butterfly Valves

PRESSURE REDUCING CONTROL VALVE

CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.

Cash Valve B SERIES PRESSURE REGULATORS. ISSUED - JANUARY 1999 CAVMC-0509-US-0208 ISO 9001 Certified

KUNKLE SERIES 6000 SAFETY VALVES SAFETY AND RELIEF PRODUCTS

Series Pressure Relief Valves 197C

67C Series Instrument Supply Regulators

P99 Pressure Reducing Regulator

Safety and Relief Valves for Industrial and Commercial Applications.

GRINNELL MODEL CB800 CIRCUIT BALANCING VALVE INSTALLATION & SETTING HANDBOOK

CASH VALVE B SERIES PRESSURE REGULATORS

Specialty Products. Strainers. Check Valves. Butterfly Valves

CASH VALVE SERIES FR BACK PRESSURE VALVES

Crosby Style JQ pressure relief device

MERCER VALVE SERIES Flanged THINK...MERCER FIRST MERCER VALVE CO., INC. AUTO SEAT TECHNOLOGY

Model CV-1FR Grooved-End Riser Check Valves 2 Inch to 12 Inch (DN50 to DN300) General Description. Installation. Technical Data

GD N (not shown) No Switches. GD N Grooved 2¹ ₂", 3", 4", 6", 8", 10"

Price List. Specialty Products / Strainers / Check Valves / Butterfly Valves. Effective July 2, MuellerSteam.com 2018 MUELLER PRICE LIST

MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL

Iron Check Valves Illustrated Index

CASH VALVES TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES

Ductile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A

Transcription:

Cast Iron Liquid Relief Valves Features Bolted bonnet permits easy inspection and servicing without removal from system. Quality cast iron body and bonnet, insert and disc are available in either bronze or SS and lapped for optimum performance. Springs are steel with plating for corrosion protection. High lift, wing-guided disc offers high relieving capacity. Pivot between disc and spring corrects misalignment and compensates for spring side thrust. Model Descriptions Model 91: Bronze trim, with pressuretight cap. Suitable for maximum back pressure of 0 psig. Variation 0 for field adjustability. Model 18: Bronze trim, UL and FM approved for fire pump installations. Special design offers minimum set pressure of 0 psig. Easily adjustable with handwheel to 00 psig (17 psig with optional 1# inlet flange). Model 8: Bronze trim, with pressuretight cap. UL and FM approved for fire pump installations. Suitable for maximum back pressure of 0 psig. Supplied with handwheel. Applications Fire Pump Service, UL and FM approved. (Models 18, 8) Overpressure relief and protection of pumps, tanks, lines and hydraulic systems. Pressure regulation. Options SS trim. (insert and disc) (Variation 0) Female x Female NPT connections. (1 1 /-inch through -inch sizes) Inlet and outlet flanges per ANSI B1.1, 1-inch - 1#. Limited to 17 psig maximum set pressure. Model 8 Pressure and Temperature Limits 1 Model 91: to 00 psig; -0 to 0 F Models 18, 8: 0 to 00 psig; -0 to 0 F Furnished standard with ANSI rated B1.1-0# inlet flange and ANSI rated B1.1-1# outlet flange. Note 1. For other pressure and temperature limits, consult ANSI B1 cast iron flange standards. Flow Control Kunkle is either a trademark or registered trademark of Tyco International Services AG or its affiliates in the United States and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Total Flow Control Solutions Copyright 00 Tyco Flow Control. All rights reserved. -US-00

Parts and Materials Model 91, - Non-code, Liquid Relief Valve No. Part Name Materials 1 Body Iron, A1 Class A or B O-ring BUNA-N Insert 1 Disc 1 Spring Step Spring Steel, Aluminum Coated 7 Bonnet Gasket Fiber and Nitrile, Klinger C-00 or C-01 8 Hex Head Cap Screw Steel, SAE Gr. 9 Bonnet Iron, A1 Class A or B 10 Cap Gasket Fiber and Nitrile, Klinger C-00 or C-01 11 Compression Screw Bushing Iron, A 80--0 1 Jam Nut 1 Compression Screw 1 Cap Iron, A1 Class A or B 1 Socket Set Screw Steel, Commercial 1 Stem 1 1 1 11 10 9 8 7 1 1 Items not shown Handwheel Handwheel Jam Nut Iron, A1 Class A or B Steel Plated, Commercial 1 Model 91 Notes 1. Disc (item ) and insert (item ) material Bronze, B-8 Alloy 800 or B, also available in SS, A7 Gr. CF-8, as a package option.. Material CS with corrosion preventative coating, commercial Gr. or Brass, B1.. bolts required for - and -inch sizes, and 8 bolts required for -inch size.. Material Brass, B1 or Bronze, B8 casting.. Handwheel option available, delete cap (item 1) and gasket (item 10).. Inlet and outlet flanges per ANSI B1.1 0#, inlet flange standard and 1# inlet flange optional. Outlet flange 1#. Copyright 00 Tyco Flow Control. All rights reserved.

Parts and Materials 1 1 1 11 10 9 8 7 1 1 1 17 Models 18 and 8 - Non-code No. Part Name Materials 1 Body 1 Iron, A1 Class A or B O-ring BUNA-N Insert Disc Spring Step Spring Steel, Aluminum Coated 7 Bonnet Gasket Fiber and Nitrile, Klinger C-00 or C-01 8 Hex Head Cap Screw Steel, SAE Gr. 9 Bonnet Iron, A1 Class A or B 10 Compression Screw Bushing Brass, B1 11 Jam Nut Brass, B1 1 Compression Screw 1 Handwheel Iron, A1 Class A or B 1 Handwheel Locknut Steel Plated, Commercial Gr. 1 Spring Pin Steel, Commercial Gr. 1 Socket Set Screw Steel, Commercial Gr. 17 Stem Compression Screw Locknut Wrench Installation Instruction Steel, A Paper, Commercial Gr. 18 1 1 Model 18 Model 8 only 18 Cap 7 Iron, A1 Class A or B 19 Cap Gasket 7 Gasket, Klinger Silicone C-00 1 11 10 19 9 8 7 1 1 17 Notes 1. Inlet and outlet flanges per ANSI B1.1 0#, inlet flange standard and 1# inlet flange optional. Outlet flange 1#.. Disc (item ) and insert (item ) material Bronze, B-8 Alloy 800 or B, also available in SS, A7 Gr. CF-8, as a package option.. Material CS with corrosion preventative coating, commercial Gr., Brass, B1 or SS, A8 TY 1.. bolts required for - and -inch sizes, and 8 bolts required for -inch size.. Material Brass, B1 or Bronze, B8 casting (Model 18 only), B8 Alloy 800 (Model 8 only).. Not shown on assembly. 7. Cap (item 18), Gasket (item 19) and Locknut (item 11) factory installed. Handwheel (item 1) shipped unassembled (Models 18 and 8). 1 Model 8 Copyright 00 Tyco Flow Control. All rights reserved.

Specifications Model 91 1 Model Valve Connections Valve Dimensions Min/Max Approx. Number Size ANSI Standard in Set Pressure Weight (in) Inlet Outlet A B C (psig) (lb) 091A-G 1 1 / x 1 1 / Female NPT Female NPT / 1 / 11 7 /8 /00 7 091H-G 1 1 / x 1 1 / 1# Flange 1# Flange / 1 / 11 1 / /17 091K-G 1 1 / x 1 1 / 0# Flange 1# Flange / 11 1 / /00 091A-H x Female NPT Female NPT 1 /8 1 /8 1 / /00 091H-H x 1# Flange 1# Flange / /8 1 / /17 7 091K-H x 0# Flange 1# Flange /8 1 / /00 7 091A-J 1 / x 1 / Female NPT Female NPT 1 / 1 / 1 1 / /00 8 091H-J 1 / x 1 / 1# Flange 1# Flange 1 / / 1 1 / /17 091K-J 1 / x 1 / 0# Flange 1# Flange 1 / / 1 1 / /00 091A-K x Female NPT Female NPT 7 /8 7 /8 1 /00 81 091H-K x 1# Flange 1# Flange 7 /8 7 /8 1 / /17 98 091K-K x 0# Flange 1# Flange 1 / 7 /8 1 / /00 98 091A-M x Female NPT Female NPT /8 1 / /00 1 091H-M x 1# Flange 1# Flange /8 1 / /17 170 091K-M x 0# Flange 1# Flange /8 1 / /00 170 091H-P x 1# Flange 1# Flange 9 /8 8 1 / 1 /17 0 091K-P x 0# Flange 1# Flange 9 /8 8 1 / 1 /00 0 Models 18 and 8 1 Model Valve Connections Valve Dimensions Min/Max Approx. Number Size ANSI Standard in Set Pressure Weight (in) Inlet Outlet A B C (18) C (8) (psig) (lb) *8A-K x Female NPT Female NPT 1 /8 7 /8 0 /8 1 /8 0/00 8 *8H-K x 1# Flange 1# Flange 1 /8 7 /8 0 /8 1 /8 0/17 110 *8K-K x 0# Flange 1# Flange 1 /8 7 /8 0 /8 1 /8 0/00 110 *8A-M x Female NPT Female NPT /8 1 / 0/00 1 *8H-M x 1# Flange 1# Flange /8 1 / 0/17 18 *8K-M x 0# Flange 1# Flange /8 1 / 0/00 18 *8H-P x 1# Flange 1# Flange 9 /8 8 1 / 0 1 0/17 0 *8K-P x 0# Flange 1# Flange 9 /8 8 1 / 0 1 0/00 0 Notes 1. Temperature limits -0 F to 0 F.. Replace asterisk with desired model number. Data applicable to Models 18, 8. C C A A B Model 91 Models 18, 8 B Copyright 00 Tyco Flow Control. All rights reserved.

Capacities Liquid Overpressure Factors To determine capacities at other than % overpressure/accumulation, multiply capacity shown by: 10% Acc. = 0. 1% Acc. = 0.8 0% Acc. = 0.9 Models 18, 8 Capacities Note UL/FM Certified Capacities 1 Size, in GPM x 00 x 1000 x 000 1. Rated at 100 psig set pressure and % accumulation 1 psig. Non-code Liquid - % Accumulation (GPM) Set Pressure Inlet Size (psig) 1 1 / 1 / 10 79 1 177 1 0 111 17 0 7 89 0 77 1 1 07 8 109 0 88 17 1 0 99 17 7 9 707 11 0 108 19 01 77 19 70 117 08 8 87 17 80 1 8 01 89 1789 90 1 9 1 99 1897 100 10 9 89 0 1000 000 110 17 1 08 87 109 097 10 1 7 1 109 191 10 19 8 8 110 80 10 1 9 0 118 10 171 0 7 8 1 9 10 177 1 9 708 1 0 170 18 07 70 10 07 180 188 71 1 8 190 19 77 179 77 00 198 0 79 11 88 10 0 1 811 19 898 0 07 9 77 81 18 9 0 1 78 90 89 117 0 0 17 8 0 87 19 098 0 1 9 1 88 181 1 0 01 7 90 11 70 0 09 9 90 1 8 80 17 0 97 17 90 8 9 170 0 00 1 7 970 17 10 8 8 98 171 0 0 9 100 1789 0 70 1017 1817 0 8 9 717 10 18 0 1 77 108 1871 0 7 78 10 1898 70 9 79 78 1077 19 80 7 8 78 109 190 90 7 9 78 110 197 00 80 98 777 110 000 Copyright 00 Tyco Flow Control. All rights reserved.

Model Number/Order Guide Model Number Position Example 1 7 8 9 10 11 1 1 1 1 0 9 1 K M 0 1 A M S 0 0 0 Model 091 18 8 Connection Model A - Female x Female NPT H - 1# Flange x 1# Flange K - 0# Flange x 1# Flange Inlet Size G - 1 1 /-inch H - -inch J - 1 /-inch K - -inch M - -inch P - -inch Variation (01 through 99) 01 - Catalog standard 0 - SS seat and disc 0 - Model 91 w/handwheel (K, M and P inlet only) 1 - Viton O-ring - Viton O-ring with SS seat and disc Design Revision Indicates non-interchangeable revision. Current Design at Revision A. Valve Service M - Liquid Spring Material C - Aluminum Painted, ASTM A1 Steel (G, H, J inlet sizes only) S - Aluminum Painted, ASTM A9 Steel (K, M, P inlet sizes only) Set Pressure 000 - psig 000-00 psig Note 1. Viton is a registered trademark of DuPont Dow Elastomers. Facility Phone: 88-9-700 Tyco Valves & Controls www.kunklevalve.com Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide to TFC products and services. Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for their particular purpose and system requirements. TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco reserves the right to change product designs and specifications without notice. Copyright 00 Tyco Flow Control. All rights reserved.

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback