Contact Us: BB Technologies is a 100% black owned corporation registered in terms of the T: +27 51 430 5328 CIPRO F: +27 act 86 636 of 1998; 3217 we are a professional national suppliers and installers of emergency www.bbtechonline.co.za lights and sirens for traffic departments, health departments, both public and private sector, we are based in Bloemfontein, Free State. The company was Suite founded 03 Westdene in 2010. Park, 57 Kellner Street Westdene, Bloemfontein, 9301 BB Technologies aims to provide an excellent service to its customers that will enable it to grow to be amongst the best emergency lights and sirens suppliers in South Africa, Our dedicated technicians strives to offer top quality service at all time. 1
LED (LIGHT EMITTING DIODE) WHAT IS AN LED? An LED is a special diode that emits light when connected to a circuit board. Inside the diode is a semi-conductor chip with positive and negative electrons separated by a junction. When sufficient voltage is supplied, the electrons cross the junction and join together to create light. WHY LED S ARE THE LIGHT OF THE FUTURE Energy efficient - extremely low consumption compared to incandescent globes Reliability - a light source with a lifetime of up to 50 000 hours of constant use Safety - rapid switching characteristics leads to quicker response times Damage resistant - epoxy resined instead of glass housing Shock resistant - a chip encased in epoxy resin instead of a filament Vibration resistant - soldered circuit board has no moving or loose parts Water resistant - no service required therefore can be fully enclosed in a unit Flexibility - because of its versatility, any design is possible Module Generation 3 (Amber, Blue, Red, White) 2
SM3 LIGHTBARS MAGNETIC MOUNT MINI LIGHTBAR WITH BUILT-IN SPEAKER & NON P.A. AMPLIFIER MOTOR CYCLE LIGHTBAR 3
SPECIFICATIONS Height - 70mm Width - 220mm Length - 200mm to 2300mm FEATURES Aerodynamic design to reduce drag and increase fuel economy of vehicle 360º light output on a horizontal line Extremely low current draw (0.3 amps per module) 1W LED s in each module 4 head LED modules available on request LED modules and lenses are separate components which reduces replacement costs Customers option for LED integrated lenses or separate lens and LED modules SAE certified top quality LED s No form of atmospheric charge can interfere with LED s With correct installation practices, the lightbar can withstand the toughest road conditions Multiple colour combinations of LED modules and lenses available Available with a magnet kit for mini lightbars (refer RB80 or RB90 on page 17) Available with TR DECO and/or TR SIGN (refer to pg 17) Our 90kg magnets (RB90) are currently used by traffic departments nationally for their strength and durability ASSEMBLY Specifically designed aluminum with 10 micron anodising for protection against rust and cracks Ultra violet stabilisation on polycarbonate lenses guaranteed not to fade or crack under normal conditions Epoxy resined printed circuit boards for extreme weather conditions Stainless steel, powder coated mounting brackets for strength and durability Pure natural moulded rubber pads for protection between vehicle and lightbar, and reduction of vibration related faults High quality brushed stainless steel (304) clamps for drill-less mounting to vehicles Two button touchpad with LED indicator lamps for easy control of lightbar Can be built to house 100W speaker (41004) and/or amplifier (refer to pg 7) 4
SM2 LIGHTBARS SPECIFICATIONS Height - 70mm Width - 220mm Length - 200mm to 2300mm FEATURES Aerodynamic design to reduce drag and increase fuel economy of vehicle 360º light output on a horizontal line Extremely low current draw (0.4 amps per head) 5mm LED s used (75 in each head) 5mm LED strips available on request LED heads and lenses are separate components which reduces replacement costs No form of atmospheric charge can interfere with the LED s With correct installation practices, the lightbar can withstand the toughest road conditions Multiple colour combinations of LED strips and lenses available Available with a magnet kit for mini lightbars (refer RB80 or RB90 on page 17) Available with TR DECO and/or TR SIGN (refer to pg 17) Our 90kg magnets (RB90) are currently used by traffic departments nationally for their strength and durability 5
ASSEMBLY Specifically designed aluminum with 10 micron anodising for protection against rust and cracks Ultra violet stabilisation on polycarbonate lenses guaranteed not to fade or crack under normal conditions Epoxy resined printed circuit boards for extreme weather conditions Stainless steel, powder coated mounting brackets for strength and durability Pure natural moulded rubber pads for protection between vehicle and lightbar, and reduction of vibration related faults High quality brushed stainless steel (304) clamps for drill less mounting to vehicles Two button touchpad with LED indicator lamps for easy control of lightbar Can be built to house 100W speaker (41004) and/or amplifier (refer to pg 7) MINE LIGHTBARS Designed for use by vehicles on mine sites Reverse alarm buzzer can be installed insidelightbar or on vehicle Can include signage on front side of lightbar Number of modules can vary SPECIFICATIONS Height - 70mm Width - 220mm Length - 600mm to 2300mm 6
FEATURES Aerodynamic design to reduce drag and increase fuel economy of vehicle 360º light output on a horizontal line Extremely low current draw (0.3 amps per module) 1W LED s used inside the module LED modules and lenses are separate components which reduces replacement costs Customers option for LED integrated lenses or separate lens and LED module SAE certified top quality LED s No form of atmospheric charge can interfere in LED s With correct installation practices, the lightbar can withstand the toughest road conditions Reverse alarm buzzer built into lightbar or separately mounted on vehicle Available with TR SIGN (refer to pg 17) The purpose of a mine lightbar is to createa high level of visibility for vehicles travellingon a mine site under a variety of low visibility conditions. ASSEMBLY Specifically designed aluminum with 10 micron anodising for protection against rust and cracks Ultra violet stabilisation on polycarbonate lenses guaranteed not to fade or crack under normal conditions Stainless steel, powder coated mounting brackets for strength and durability Pure natural moulded rubber pads for protection between vehicle and lightbar, and reduction of vibration related faults High quality brushed stainless steel (304) clamps for drill less mounting to vehicles 7
AMPLIFIERS & SPEAKERS MICROPHONES MDM-350 Microphone and controller for amplifiers MDM-350N P.A. and Non-P.A. option Easily removeable from amplifier AMPLIFIERS 41001 12V or 24V available (P.A.) 100W or 200W systems Radio talk through Standard tones (Yelp, Phaser, Wail) HRT (Horn Ring Transfer) hooter activation 41002 11 ohm output to minimise current draw (Non P.A.) Anodised aluminium housing SPEAKER DRIVER 41003 100W speaker 11 ohm resistance for compatability to the amplifier Complete with bell, tip and bracket MILLED SPEAKER DRIVER 41004 100W speaker for lightbar 11 ohm resistance for compatability to the amplifier Modified throat for easy installation into lightbar SPEAKER TRUMPET 41005 Speaker trumpet for lightbar Used together with 41004 Custom made for our aluminium lightbar base to allow for easy installation 8
STROBE LIGHT SYSTEMS 60W strobe power supply Individually fused power supply Screened cabling for zero interference Complete with four strobe tubes Installed inside headlights and tail lights Control unit mounted inside vehicle LED strobe systems also available DASH LIGHTS & SM3 FLAT BAR DASH LIGHT Generation 3 LED s Detachable or permanent mount Length can vary per customers requirements Different colour combinations available Can house multiple modules Two button touchpad with LED indicator lamps for easy control of lighting unit SM3 FLAT BAR Generation 3 LED s Magnetic or permanent mount Any length up to 2m Ideal for canopied vehicles Multiple colour combinations Can be linked to driving system as an attachment for towed vehicles via trailer plug 9
BEACON LIGHTS Available in 12V or 24V Mounted on a full stainless steel bearing Multistage chrome mirroring for durability High quality polycarbonate lenses (Available in blue, amber, red or clear) Silent running thanks to nylatron gearing LED option with 300 5mm LED s Magnetic or permanent mount MARKER LIGHTS TR180 TR 100 10 Available in 12V or 24V Dimensions - TR100 100mm x 50mm TR180 200mm x 100mm Waterproofed for exterior mounting on vehicles High quality polycarbonate lenses (Available in blue, amber, red or clear) Available with a built-in flasher for independent operation
SPARE PARTS & ACCESSORIES TRF060 Flasher unit for lightbar Resined to prevent moisture damage Labelled for easy installation Maximum draw per channel is 6 x Generation 3 3 head modules or 5 x Generation 3 4 head modules TRF066 Flasher unit for lightbar Positive switching Works together with TRC066 Maximum draw per channel is 6 x Generation 3 3 head modules or 5 x Generation 3 4 head modules Installed inside the vehicle together with control box TRF022 Used for lightbars with less than 10 modules Preprogrammed with 6 flash patterns Easily connected to lightbar Harness length as per customer Colour coding ensures easy connection to lightbar TRC022 Works with TRF060 Preprogrammed with 6 flash patterns Easily connected to light bar Harness length as per customer For lightbars with 10 or more modules Colour coding ensures easy connection to lightbar TRC066 Controller for TRF066 6 LED s showing lightbar flashing pattern Auxillary connection for other lights Built-in amplifier control 48304 48303 Generation 3 3 head or 4 head LED module 1W per LED Low current draw Available in blue, red, white, amber or green Comes with bezel for external mounting Self flashing modules also available TR1000 Lens kit for lightbar (including seals) All lenses are UV stabilised Available in blue, clear, opaque white, red, amber, purple or green 11
SPARE PARTS & ACCESSORIES SM BRACKET KIT Premium mounting kit for lightbars Various size clamps available to suite different vehicles Powder coated to prevent rusting Z BRACKET KIT Standard mounting kit for lightbars Various size clamps available to suite different vehicles Powder coated to prevent rusting RB80 Magnet for lightbar and beacon light Pulling power up to 45kgs Not suitable for high speed vehicles RB90 Magnet for lightbar and beacon light Pulling power up to 90kgs Suitable for high speed vehicles Available with rubber boot TR SIGN Signage available to show company name, vehicle number or telephone number TR DECO Deco globes available as spotlights for police and security lightbars Positioned on the side or front of lightbar TR1001 Lens for beacon light Available in blue, red, amber or clear 12
SPARE PARTS & ACCESSORIES 84055 Rotating module for beacon light TR1006 Lens for lightbar Available in blue, red, amber, clear, opaque white, green or purple TR1007 End cap for lightbar Available in blue, red, amber, clear, opaque white, green or purple OTHER ACCESSORIES MAP LIGHTS MAP LIGHTS ALSO AVAILABLE DRIVING LAMPS 13
14
15
TM8250 mobile radio The robust, high performance TM8250 mobile radio is the ideal choice for fastmoving mobile teams who rely on instant voice and data communications. Large LCD display 14 characters and four lines of alphanumeric text User-friendly menu structure for easy navigation Four programmable function keys Optional keypad microphone for enhanced dialing capability 1500 conventional channels with built-in CTCSS and DCS Data capable supports 1200/2400 baud FFSK data as standard Internal high speed data modem (12 kbps on NB channels/19.2 kbps on WB channels) (software option) 300 scanning/voting groups and 26 channel zones Full Selcall functionality Displays and supports short data messages via CCDI (Computer Controlled Data Interface) Voice inversion scrambling MDC 1200 encode (software option) Type 99 (2-tone) decode Lone Worker function to improve worker safety Multiple auxiliary ports and expansive internal options area Direct connect GPS and GPS display option 16