SPUN (MELT-BLOWN) POLYPROPYLENE MICRON FILTER CARTRIDGE Description: Spun Filter Cartridge with inner supporting Polypropylene Core is the latest development in nominal rated filter cartridge, giving longer life and overall performance from the controlled manufacturing process. Produced from virgin polypropylene. These filter elements have been designed using the latest techniques in fiber production to give optimum all round performance with regard to both flow and dirt holding capacity. The techniques used during the construction of the cartridge ensure that each element is produced without the need for binders or lubricants. The spun bonding process literally blows continuous molten polypropylene fine fibers some as small as 1 micron in diameter onto a polypropylene support core, which results in a one piece bonded structure resistant to unloading and media shedding. The cartridges are produced in controlled environment and strict monitoring during production ensuring the consistent quality of the filter. Spun Filter Cartridge is ideally suited for a wide range of product and process filtration applications where absolute filtration is not required. Spun Filter Cartridge will fit most industrial metal housings using double open ended sealing arrangement, as well as standard polypropylene, PVC, and polycarbonate housings. In addition the elements are available with end caps for most plug in style O ring fittings, making them ideally suited for more critical applications requiring the assurance of these double seals. Cartridge filtration systems generally operate most effectively and economical on applications having contamination levels less than 0.01% by approx weight (100ppm). For heavier contamination applications, cartridges are normally used as final polishing filters. Material of Construction: Standard Cartridges Jumbo (Big Blue) Cartridges Length : 10 /254mm, 20 /508mm, 10 /254mm, 20 /508mm, 30 /762mm, 40 /1016mm 30 /762mm, 40 /1016mm Approx Outer/Inner Diameter: 61-63mm/27-28mm 114mm/27-28mm 2.5, 4.5, Outer /1, 2 inner diameter Products & Specifications: Materials Filtering Medium : Polypropylene. Core : Polypropylene. Micron Rating : 1µm, 3µm, 5µm, 10µm, 20µm On request. Operating Conditions : Maximum Temperature: 65ºC Polypropylene Maximum Differential Pressure: 4 Bar at 20 ºC Maximum Rec. Differential Pressure:2 Bar Application : Food and Beverages Resins, Paints & Inks Process & Potable Water High Purity Chemicals Pharmaceuticals and cosmetics Photography Emulsions End Cap/Inner Core Configuration: DOE. End Caps/Inner Core/Adapters/Gasket/O Rings : Nil.
MELT-BLOWN POLYPROPYLENE MICRON FILTER CARTRIDGE Description: These are popular water filters that have multiple layers of Polypropylene Fibre. These filters work on the principle of depth filtration, offering a gradual rise in pressure drop across the life of the filter equipment. The filter equipment functions independently by simply fixing it on the nozzle of any pipeline in the industries for getting clean drinking water. Melt Blown cartridge filters are made up of thermally bonded polypropylene micro fibers. Thermal bonding imparts integrity and batter efficiency to the filter element. Depth filter elements will not impart taste, odour or colour to the liquid being filtered which makes it ideal for food and beverage applications. They are also not brittle or prone to breakage problems unlike resin bonded cartridge filters. They have high void volume resulting in low differential pressure and excellent dirt holding capacity. All these features coupled with economical pricing make them a product of choice. The filters are meant for water filtration applications and can be mfg. in different weights. As the density of the PP in the filter increases, its strength and efficiency also increases. Excellent dirt holding capacity and hence longer on-stream life. Thermally bonded Polypropylene microfiber construction. High flow volume, resulting in low differential pressure. Good combination of economy and performance. Consistent flow rate and superior filtration performance. Materials Filtering Medium : Polypropylene, Nylon (Other yarn tapes on request) Core : Polypropylene. Micron Rating : 1µm, 5µm, 10µm, 20µm & on request, customized micron rating (0.55µm-100µm) can be also provided. The filters are of nominal rating with an efficiency of 88-90%. Material of Construction : Standard Cartridges Jumbo (Big Blue) Cartridges Length : 10 /254mm, 20 /508mm, 10 /254mm, 20 /508mm, 30 /762mm, 40 /1016mm 30 /762mm, 40 /1016mm Approx Outer/Inner Diameter : 61-63mm/27-28mm 114mm/27-28mm 2.5, 4.5, 6 and 8 Outer /1, 2 inner diameter End Cap/Inner Core Configuration: DOE. End Caps/Inner Core/Adapters/Gasket/O Rings : Nil. Effective Surface Are : 0.05m2/10 Operating Conditions : Maximum Temperature: 70ºC Polypropylene 120ºC Cotton with SS Core & 300ºC Fiber Glass with SS Core Maximum Differential Pressure: 2.2Kg/Cm2 Collapse Pressure: 3.5Kg/Cm2 Application : Water Filtration Portable & Demineralized Water Organic Solvent & Acid Plating Solutions Photographic Solutions Chemicals Animal and Vegetable Oils Zinc Chloride Pre-Membrane Filtration Ferric Hydroxide Food & Beverage Caustic Soda Etlyl Alcohol Mineral Acid Oxidizing Agent General Process Ind. Other Grades : Eco : Nominal rated melt blown filters for low tech commercial applications Ultra : Great combination of economy and performance with dual zone, graded density structure Extreme : Multi zone high performance melt blown filters with high differential pressure capabilities Absolute : Fine filtration at efficiency of 99.9% (Beta Ratio : 1000)
RO-Protect ECO Melt-Blown Filter Cartridges Description: Nominal Rated Melt Blown Cartridge Filters for Low Tech Commercial Applications RO - Protect ECO Melt Blown cartridge filters are made up of thermally bonded polypropylene micro fibers. Thermal bonding imparts integrity and batter efficiency to the filter element. RO - Protect ECO depth filter elements will not impart taste, odour or colour to the liquid being filtered which makes it ideal for food and beverage applications. They are also not brittle or prone to breakage problems unlike resin bonded cartridge filters. They have high void volume resulting in low differential pressure and excellent dirt holding capacity. All these features coupled with economical pricing make them a product of choice. Excellent dirt holding capacity and hence longer on-stream life. Thermally bonded Polypropylene microfiber construction. High flow volume, resulting in low differential pressure. Good combination of economy and performance. Consistent flow rate and superior filtration performance. Materials Filtering Medium : Polypropylene Micron Rating : 1µm, 2µm, 3µm, 5µm, 10µm, 15µm, 20µm, 25µm, 50µm, Dimensions : Standard Cartridges Jumbo (Big Blue) Cartridges Length : 10 /254mm, 20 /508mm, 10 /254mm, 20 /508mm, 30 /762mm, 40 /1016mm Approx Outer/Inner Diameter : 61-63mm/27-28mm 114mm/27-28mm Effective Surface Are : 0.05 m2/10 0.09m2/10 Maximum Differential Pressure: 1.4Kg/Cm2 Collapse Pressure: 2.2Kg/Cm2 Application : Process Water Portable Water Electroplating Chemicals Pre-Filtration to R. O. Petrochemicals Metal Finishing Water Filtration
RO-Protect ULTRA Melt-Blown Filter Cartridges Description:Great Combination of Economy and Performance with Dual Zone, Graded Density Structure RO - Protect ULTRA is a high performance Polypropylene Melt Blown Cartridge Filters which is constructed from high-tech and precisely automatic controlled machines. The fiber matrix of the filter cartridges has been engineered to provide structural integrity throughout the long service life and stable pressure drop. Excellent character of nonfiber releasing provides optimum fluid purity and eliminates foaming. RO - Protect ULTRA cartridge combine quality and cost effectiveness to provide excellent filtration value. Free of binders, additives and lubricants. Low pressure drop, high dirt holding capacity & long service life. 100% Polypropylene construction provides excellent chemical compatibility with a variety of process fluids and applications. Graded pore construction provides optimum particle retention and prevents media migration, ensuring consistent filtration performance. Materials Filtering Medium : Polypropylene Micron Rating : 1µm, 2µm, 3µm, 5µm, 10µm, 15µm, 20µm, 25µm, 50µm, Dimensions : Length : 10 /254mm, 20 /508mm, 30 /762mm, 40 /1016mm Approx Outer/Inner Diameter : 61-63mm/27-28mm Effective Surface Are : 0.05 m2/10 Maximum Differential Pressure: 1.8Kg/Cm2 Collapse Pressure: 3Kg/Cm2 Application : Pre RO/DI Plating Solution Chemicals Petrochemical Process Food Beverage Electronics
RO-Protect EXTREMER Melt-Blown Filter Cartridge Description: Multi Zone High Performance Melt Blown Cartridge Filters with High Differential Pressure Capabilities RO - Protect EXTREME depth cartridge filter is Two-Layers structure cartridge with fine fibers in inner layer and coarse fiber in outer layer in order to filter different diameter of dust in different layer. This design has high contaminant holding capacity, which also ensures a longer service life and lower pressure drop. Micro-denier melt-blown filtration fiber, high removal rating. Formed by thermal bond without use of any binders and adhesive. 100% Polypropylene for compatibility with a wide range of process fluids. Graded density structure cartridge, high contaminant holding capacity, long filter service life. In compliance with EU directive 2002/72/EC for plastic in food contact. Materials Filtering Medium : Polypropylene Micron Rating : 1µm, 2µm, 3µm, 5µm, 10µm, 15µm, 20µm, 25µm Dimensions : Length : 10 /254mm, 20 /508mm, 30 /762mm, 40 /1016mm Approx Outer/Inner Diameter : 61-63mm/27-28mm Effective Surface Are : 0.05 m2/10 Maximum Differential Pressure: 2.1Kg/Cm2 Collapse Pressure: 4Kg/Cm2 Application : Pre-Filtration of DI & RO water filtration system for industry. Filtration of process water and recycled water. Filtration of medium & low viscosity chemicals fluids. Filtration of electroplating fluid in conventional electroplating industry. Filtration of Etching and images development process solution in PCB industry.
RO-Protect ABSOLUTE Melt-Blown Filter Cartridges Description:: Fine Filtration at efficiency of 99.9% (Beta Ratio : 1000) RO - Protect ABSOLUTE melt Blown Cartridge Filter are construction by an innovative design that utilizes flow pattern progressively from exterior surface to interior center. This Cartridge design provides significant service life while maintaining consistent filtration efficiency. Manufactured with a truly graded density, the cartridge exhibit absolute rate at 99.9% and exceptional dirt holding capacity. Micro-denier melt-blown filtration fiber, high removal rating. Formed by thermal bond without use of any binders and adhesive. Continuously gradient pore construction increases dirt holding capacity. In compliance with EU directive 2002/72/EC for plastic in food contact. 100% Polypropylene for compatibility with a wide range of process fluids. Absolute rate 99.9% efficiency (Beta Ratio : 1000) with micron rating from 1+ µm to 5 µm Materials Filtering Medium : Polypropylene Micron Rating : 1+µm, 1µm, 3µm, 5µm Dimensions : Length : 10 /254mm, 20 /508mm, 30 /762mm, 40 /1016mm Approx Outer/Inner Diameter : 61-63mm/27-28mm Effective Surface Are : 0.05 m2/10 Maximum Differential Pressure: 2.2Kg/Cm2 Collapse Pressure: 4Kg/Cm2 Application : Cooling water filtration in semiconductor industry (PCW). RO Pre-Filtration in water waste water applications. Medium & low viscosity chemicals filtration. Paint filtration in panel painting industry. Process water and recycled water Filtration. DI Water filtration. CMP Slurries filtration.