TECHNICAL GUIDE LX SERIES SPLIT-SYSTEM HEAT PUMPS 13 SEER R-410A 3 PHASE 2.5 THRU 5 NOMINAL TONS S: THJD30 THRU 60 (3 ) Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at www.upgnet.com Additional rating information can be found at: www.ahridirectory.org WARRANTY SUMMARY* Standard 1-Year limited parts warranty. Standard 5-Years limited compressor warranty. *Does not apply to R-22 models or internet sales. See Limited Warranty certificate in User's Information Manual for details. DESCRIPTION 571924-BTG-D-0714 The 13 SEER Series unit is the outdoor part of a versatile climate system. It is designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for typical applications this climate system is supported with accessories and documents to serve specific functions. FEATURES Small Footprint - The compact footprint is a perfect fit for any application. Quality Condenser Coils - The coil is constructed of copper tubing and enhanced aluminum fins for increased performance. Coil Protection - Coils are protected from damage by a slotted, stamped steel coil guard. Protected Compressor - Compressors are protected internally by a high pressure relief valve and a temperature sensor, and externally by the system high and low pressure switches. A factory installed liquid line filter-drier further protects the compressor against moisture and debris. Environmentally Friendly Refrigerant - The next generation refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion. Durable Finish - The cabinet is made of G90-equivalent galvanized steel, finished in a durable titanium colored powdercoat. The coated steel wire fan guard and pre-treated, galvanized steel chassis components resist corrosion and rust creep. Lower Installed Cost - Installation time and costs are reduced by easy power and control wiring connections. The unit is factory charged for a 15-foot lineset. The small base dimension means less space is required on the ground or roof. Top Discharge - Warm air from the top mounted fan is blown up, away from the structure and any landscaping. This allows compact location on multi-unit applications. Low Operating Sound Level - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the condenser coil muffle the normal fan motor and compressor operating sounds. Low Maintenance - Long life, permanently lubricated motorbearings need no annual servicing. Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls make for easy servicing of the unit. Secured Service Valves - Secured, re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging. Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program. FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
Physical and Electrical Data THJD30 S43S4 THJD36 S43S4 THJD42 S43S4 THJD48 S43S3 THJD60 S43S5 THJD30 S44S4 THJD36 S44S4 THJD42 S44S4 THJD48 S44S3 Unit Supply Voltage 208-230V, 3 60Hz 460V, 3 60Hz Normal Voltage Range 1 187 to 252 432 to 504 Minimum Circuit Ampacity 11.0 12.9 12.9 15.5 21.2 6.0 7.0 7.2 7.2 9.1 Max. Overcurrent Device Amps 2 15 20 20 25 35 15 15 15 15 15 THJD60 S44S5 Min. Overcurrent Device Amps 3 15 15 15 20 25 15 15 15 15 15 Type Recip Recip Recip Recip Scroll Recip Recip Recip Recip Scroll Compressor Amps Rated Load 8.1 9.1 12.9 11.2 15.9 4.2 4.5 5.1 5.1 6.6 Locked Rotor 63 68 68 88 110 30 34 34 44 52 Crankcase Heater No No No No Yes No No No No Yes Factory External Discharge Muffler No No No No No No No No No No Factory External Check Valve No No No No No No No No No No Fan Diameter Inches 24 24 24 24 24 24 24 24 24 24 Rated HP 1/8 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Fan Motor Rated Load Amps 0.8 1.3 1.3 1.3 1.3 0.8 0.8 0.8 0.8 0.8 Nominal RPM 1050 850 850 850 850 850 850 850 850 850 Nominal CFM 3100 3800 3800 3800 3500 3500 3800 3800 3800 3500 Face Area Sq. Ft. 21.00 23.58 23.58 23.58 23.58 21.00 23.58 23.58 23.58 23.58 Coil Rows Deep 1 1 1 1 2 1 1 1 1 2 Fins / Inch 22 22 22 22 18 22 22 22 22 18 Liquid Line Set OD (Field Installed) 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Vapor Line Set OD (Field Installed) 3/4 3/4 7/8 7/8 1-1/8 3/4 3/4 7/8 7/8 1-1/8* Unit Charge (Lbs. - Oz.) 4 9-0 10-0 10-11 10-14 13-6 9-0 10-0 10-11 10-14 13-6 Charge Per Foot, Oz. 0.62 0.62 0.67 0.67 0.67 0.62 0.62 0.67 0.67 0.67 Operating Weight Lbs. 196 208 208 248 280 196 208 208 248 280 1. Rated in accordance with AHRI Standard 110-2012, utilization range A. 2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection. 3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection. 4. The Unit Charge is correct for the outdoor unit, smallest matched indoor unit, and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant, using the difference in actual lineset length (not equivalent length) multiplied by the per foot value. A C Unit Model Dimensions (Inches) Refrigerant Connection Service Valve Size A B C Liquid Vapor 30 36-1/4 34 34 36 40-1/4 34 34 3/4 42 40-1/4 34 34 3/8 48 40-1/4 34 34 7/8 60 40-1/4 34 34 7/8* * Adapter fitting must be field installed for the required 1-1/8 line set. All dimensions are in inches and are subject to change without notice. Overall height is from bottom of base pan to top of fan guard. Overall length and width include screw heads. B 2 Johnson Controls Unitary Products
System Charge for Various Matched Systems Outdoor Unit THJD30S4(3,4)S4 THJD36S4(3,4)S4 THJD42S4(3,4)S4 THJD48S4(3,4)S3 THJD60S4(3,4)S5 Required Orifice or TXV 1,2.063/4G1.071/4H1.075/4H1.078/4J1 4K1 Indoor Unit 3,4,5 Additional Charge, Oz AHE30B.063 / TXV + 0 AHE36C.063 / TXV + 6.071 / TXV + 0 AHE42D.071 / TXV + 10 AHE48D.075 / TXV + 0.078 / TXV - 14 AHE60D TXV + 0 AHR30B.063 / TXV + 0 AHR36B.063 / TXV + 6.071 / TXV + 0 AHR42C.071 / TXV + 10 AHR48D.075 / TXV + 0 AHR60D TXV + 0 AHV30B.063 / TXV + 0 AHV36C.063 / TXV + 6.071 / TXV + 0 AHV42D.071 / TXV + 10 AHV48D.075 / TXV + 0.078 / TXV - 14 AHV60D TXV + 0 FC/MC/PC32.063 / TXV + 0 FC/MC/PC35.063 / TXV + 0 FC/MC/PC37.063 / TXV + 6.071 / TXV + 0 FC/MC/PC43.063 / TXV + 6.071 / TXV + 0 FC/MC/PC/UC48.071 / TXV + 10.075 / TXV + 0 FC/MC/PC/UC60.075 / TXV + 0.078 / TXV - 14 FC/MC62.078 / TXV + 8 TXV + 0 FC64 TXV + 29 Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil only matches, please see the COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils table. FOOTNOTES: 1. For applications requiring a TXV use S1-1TVM*** series kit. 2. Approved orifice shipped with outdoor unit. 3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224. 4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications. 5. Refer to Cooling and Heating Performance Data tables for actual system performance for specified system matches. PROCEDURES: 1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnecting line tubing. 2. Verify the TXV and additional charge required for specific matched indoor unit in the system using the above table. 3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table. 4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and actual lineset length. 5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit + charge adder for actual lineset length. Johnson Controls Unitary Products 3
COOLING CAPACITY - With Air Handler Coils UNIT THJD30S4(3,4)S4 THJD36S4(3,4)S4 THJD42S4(3,4)S4 THJD48S4(3,4)S3 For Notes See Page 5. AIR HANDLER WIDTH COIL 1 RATED CFM 13 SEER HP WITH AIR HANDLERS TOTAL NET MBH COOLING SENS. SEER AHE30B 17.5 985 29.2 21.0 14.00 12.00 AHE36C 21.0 1000 29.8 21.8 14.00 12.00 AHR30B 17.5 1090 29.2 21.8 13.00 11.00 AHR36B 17.5 1060 29.6 21.6 13.00 11.00 AHV30B 17.5 1000 29.6 27.0 13.50 11.50 AHV36C 21.0 895 29.8 26.6 14.00 12.00 MV12B 17.5 FC/MC35B 1010 30.0 22.0 14.50 12.00 MV12B 17.5 FC/MC43B 1000 30.0 22.2 14.50 12.00 MV16C 21.0 FC/MC35C 1070 30.0 23.0 14.50 12.00 MV16C 21.0 FC/MC43C 1000 30.0 22.2 14.50 12.00 MX12BN21 17.5 FC/MC35B 975 29.8 22.0 14.00 12.00 MX12BN21 17.5 FC/MC43B 975 30.0 22.6 14.00 12.00 MX16CN21 21.0 FC/MC35C 1000 29.8 22.0 14.00 12.00 MX16CN21 21.0 FC/MC43C 950 30.2 22.0 14.50 12.50 AHE36C 21.0 1190 35.6 25.7 14.50 12.00 AHE42D 21.0 1180 35.6 25.6 14.50 12.00 AHR36B 21.0 1245 35.6 26.1 13.00 11.00 AHR42C 21.0 1230 35.6 25.8 13.00 11.00 AHV36C 21.0 1215 36.0 27.4 14.00 12.00 AHV42D 24.5 1180 36.0 27.6 14.50 12.00 MV12B 17.5 FC/MC43B 1225 36.0 27.2 14.50 12.00 MV12D 24.5 FC/MC48D 1160 36.0 26.6 14.50 12.00 MV16C 21.0 FC/MC43C 1200 36.0 26.8 14.50 12.00 MV16C 21.0 FC/MC48C 1200 36.0 26.6 14.50 12.00 MX12BN21 17.5 FC/MC43B 1125 36.0 26.0 13.50 11.35 MX16CN21 21.0 FC/MC43C 1200 36.0 26.8 13.50 11.35 MX12DN21 24.5 FC/MC48D 1125 36.0 26.6 14.00 12.00 MX16CN21 21.0 FC/MC48C 1200 36.0 27.0 13.50 11.35 MX20DN21 24.5 FC/MC48D 1200 36.0 27.4 14.20 12.00 AHE48D 24.5 1380 40.5 33.2 14.00 12.00 AHR48D 24.5 1320 39.5 29.6 13.00 11.00 AHV48D 24.5 1300 39.5 30.2 13.75 11.50 MV16C 21.0 FC/MC48C 1400 40.0 32.0 13.50 11.50 MV16C 21.0 FC/MC60C 1400 41.5 32.4 14.00 12.00 MV20D 24.5 FC/MC48D 1440 40.5 32.8 14.00 12.00 MV20D 24.5 FC/MC60D 1400 42.0 32.4 14.00 12.00 MX16CN21 21.0 FC60C 1400 40.0 28.4 13.50 11.35 MX20DN21 24.5 FC/MC60D 1375 40.5 28.8 14.20 12.00 AHE48D 24.5 1635 44.0 33.2 14.00 12.00 AHV48D 24.0 1585 47.0 33.4 13.00 11.00 AHV60D 24.0 1570 47.0 34.2 13.00 11.00 MV20D 24.5 FC/MC60D 1595 47.0 35.3 13.00 11.80 MV20D 24.5 FC/MC62D 1595 47.5 35.5 13.00 11.80 MX16CN21 21.0 FC60C 1600 47.5 33.4 13.25 11.35 MX20DN21 24.5 FC/MC60D 1525 47.0 33.8 13.25 11.35 MX20DN21 24.5 FC/MC62D 1525 46.5 34.0 13.25 11.35 EER 4 Johnson Controls Unitary Products
COOLING CAPACITY - With Air Handler Coils (Continued) UNIT AIR HANDLER WIDTH COIL 1 RATED CFM COOLING NET MBH TOTAL SENS. SEER EER 13 SEER HP WITH AIR HANDLERS AHE60D 24.5 1835 55.0 41.5 13.70 11.35 AHR60D 24.5 1840 54.5 41.0 13.00 11.00 AHV60D 24.5 1635 54.0 39.0 13.70 11.50 THJD60S4(3,4)S5 MV20D 24.5 FC/MC62D 1855 55.0 41.5 13.70 11.35 MV20D 24.5 FC64D 1855 58.0 42.0 13.70 11.35 MX20DN21 24.5 FC/MC62D 1750 55.0 41.0 14.50 12.00 MX20DN21 24.5 FC64D 1750 58.0 42.0 13.70 11.35 Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standard 210/240. Cooling MBH based on 80 F entering air temperature, 50% RH (Relative Humidity), and rated air flow. EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 F outdoor ambient divided by the total electric power in watt-hours at those conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period. 1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. = Not applicable. MA Modular Air Handlers use Coil Only Ratings. COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings) UNIT COIL WIDTH CFM RANGE (Min.-max.) RATED CFM COOLING NET MBH TOTAL SENS. SEER 1 EER 13 SEER HP COIL ONLY RATINGS FC/MC/PC32 14.5 800-1200 1000 29.8 21.8 13.00 11.00 THJD30S4(3,4)S4 THJD36S4(3,4)S4 THJD42S4(3,4)S4 THJD60S4(3,4)S5 FC/MC/PC35 17.5,21.0 800-1200 1000 29.8 21.8 13.00 11.00 FC/MC/PC37 14.5 800-1200 1000 30.0 22.2 13.00 11.00 FC/MC/PC43 17.5,21.0 800-1200 1000 30.0 22.2 13.00 11.00 FC/MC/PC37 14.5 1000-1400 1200 36.0 26.8 13.00 11.00 FC/MC/PC43 17.5,21.0 1000-1400 1200 36.0 26.6 13.00 11.00 FC/MC/PC48 21.0,24.5 1000-1400 1200 36.0 26.6 13.00 11.00 UC48 21.0,24.5 1000-1400 1200 36.0 26.8 13.00 11.00 FC/MC/PC60 21.0,24.5 1200-1600 1400 41.0 31.8 13.00 11.00 UC60 21.0,24.5 1200-1600 1400 40.5 31.0 13.00 11.00 FC/MC62 24.5 1600-2000 1800 54.5 40.0 13.25 11.25 FC64 24.5 1600-2000 1950 57.0 42.0 13.25 11.35 1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one. MA Modular Air Handlers use Coil Only Ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. Johnson Controls Unitary Products 5
COOLING CAPACITY - With High Efficiency Motor Furnaces UNIT THJD30S4(3,4)S4 For Notes See Page 9. FURNACE WIDTH COIL 1 RATED CFM TOTAL 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 Net MBH COOLING SENS. SEER T*(8,L)V*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00 T*(8,L)V*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00 T*(8,L)V*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00 T*(8,L)V*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.50 12.00 T*(8,L)V*C16 21.0 FC/MC/PC35C 1025 30.0 22.0 14.50 12.00 T*(8,L)V*C16 21.0 FC/MC/PC43C 990 30.0 22.2 14.50 12.00 T*(8,L)V*C20 21.0 FC/MC/PC35C 1080 30.0 23.0 14.50 12.00 T*(8,L)V*C20 21.0 FC/MC/PC43C 1000 30.0 22.2 14.50 12.00 T*9(C,V)*B12 17.5 FC/MC/PC35B 1045 30.0 22.0 14.00 11.50 T*9(C,V)*B12 17.5 FC/MC/PC43B 1035 30.0 22.2 14.50 12.00 T*9(C,V)*C16 21.0 FC/MC/PC35C 1005 30.0 22.0 14.50 12.00 T*9(C,V)*C16 21.0 FC/MC/PC43C 1030 30.0 22.2 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC35C 985 30.0 22.0 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC43C 995 30.0 22.2 14.50 12.00 TM8X080B12MP11 17.5 FC/MC/PC35B 950 29.4 21.4 13.70 11.35 TM8X080B12MP11 17.5 FC/MC/PC43B 975 30.0 22.4 14.20 12.00 TM8X080C16MP11 21.0 FC/MC/PC35C 975 30.0 22.2 14.50 12.50 TM8X080C16MP11 21.0 FC/MC/PC43C 950 30.0 22.0 14.20 12.00 TM8X100C16MP11 21.0 FC/MC/PC35C 975 30.0 22.2 14.50 12.50 TM8X100C16MP11 21.0 FC/MC/PC43C 950 30.0 22.0 14.20 12.00 TM8X100C20MP11 21.0 FC/MC/PC35C 1000 30.0 22.0 14.20 12.00 TM8X100C20MP11 21.0 FC/MC/PC43C 1000 30.0 22.6 14.20 12.00 TM8X120C20MP11 21.0 FC/MC/PC35C 1000 30.0 22.0 14.20 12.00 TM8X120C20MP11 21.0 FC/MC/PC43C 1000 30.0 22.6 14.20 12.00 TM9E060B12MP11 17.5 FC/MC/PC35B 950 29.4 21.2 13.70 11.35 TM9E060B12MP11 17.5 FC/MC/PC43B 950 29.8 21.8 13.70 11.35 TM9E080B12MP11 17.5 FC/MC/PC35B 950 29.4 21.2 13.70 11.35 TM9E080B12MP11 17.5 FC/MC/PC43B 950 29.8 21.8 13.70 11.35 TM9E080C16MP11 21.0 FC/MC/PC35C 1000 30.0 22.0 14.20 12.00 TM9E080C16MP11 21.0 FC/MC/PC43C 1000 30.0 22.6 14.20 12.00 TM9E100C16MP11 21.0 FC/MC/PC35C 1000 30.0 22.0 14.20 12.00 TM9E100C16MP11 21.0 FC/MC/PC43C 1000 30.0 22.6 14.20 12.00 TM9E100C20MP11 21.0 FC/MC/PC35C 1000 29.6 21.8 13.25 11.35 TM9E100C20MP11 21.0 FC/MC/PC43C 1000 30.0 22.2 13.50 11.35 TM9X060B12MP11 17.5 FC/MC/PC35B 950 29.4 21.2 13.70 11.35 TM9X060B12MP11 17.5 FC/MC/PC43B 950 29.8 21.8 13.70 11.35 TM9X080B12MP11 17.5 FC/MC/PC35B 950 29.4 21.2 13.70 11.35 TM9X080B12MP11 17.5 FC/MC/PC43B 950 29.8 21.8 13.70 11.35 TM9X080C16MP11 21.0 FC/MC/PC35C 1000 30.0 22.0 14.20 12.00 TM9X080C16MP11 21.0 FC/MC/PC43C 1000 30.0 22.6 14.20 12.00 TM9X100C16MP11 21.0 FC/MC/PC35C 1000 30.0 22.0 14.20 12.00 TM9X100C16MP11 21.0 FC/MC/PC43C 1000 30.0 22.6 14.20 12.00 TM9X100C20MP11 21.0 FC/MC/PC35C 1000 29.6 21.8 13.25 11.35 TM9X100C20MP11 21.0 FC/MC/PC43C 1000 30.0 22.2 13.50 11.35 TMLX080B12MP11 17.5 FC/MC/PC35B 950 29.4 21.4 13.70 11.35 TMLX080B12MP11 17.5 FC/MC/PC43B 975 30.0 22.4 14.20 12.00 TMLX080C16MP11 21.0 FC/MC/PC35C 975 30.0 22.2 14.50 12.50 TMLX080C16MP11 21.0 FC/MC/PC43C 950 30.0 22.0 14.20 12.00 EER 6 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT THJD30S4(3,4)S4 THJD36S4(3,4)S4 For Notes See Page 9. FURNACE WIDTH COIL 1 RATED CFM TOTAL 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 Net MBH COOLING SENS. 571924-BTG-D-0714 SEER TMLX100C16MP11 21.0 FC/MC/PC35C 975 30.0 22.2 14.50 12.50 TMLX100C16MP11 21.0 FC/MC/PC43C 950 30.0 22.0 14.20 12.00 TMLX100C20MP11 21.0 FC/MC/PC35C 1000 30.0 22.0 14.20 12.00 TMLX100C20MP11 21.0 FC/MC/PC43C 1000 30.0 22.6 14.20 12.00 TMLX120C20MP11 21.0 FC/MC/PC35C 1000 30.0 22.0 14.20 12.00 TMLX120C20MP11 21.0 FC/MC/PC43C 1000 30.0 22.6 14.20 12.00 T*(8,L)V*A12 14.5 FC/MC/PC37A 1150 36.0 26.4 13.75 11.50 T*(8,L)V*B12 17.5 FC/MC/PC43B 1270 36.0 27.2 13.75 11.50 T*(8,L)V*C16 21.0 FC/MC/PC43C 1205 36.0 26.8 14.50 12.00 T*(8,L)V*C16 21.0 FC/MC/PC48C 1210 36.0 26.6 14.50 12.00 T*(8,L)V*C16 21.0 UC48C 1210 36.0 26.8 14.50 12.00 T*(8,L)V*C20 21.0 FC/MC/PC43C 1190 36.0 26.8 14.50 12.00 T*(8,L)V*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00 T*(8,L)V*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00 T*9(C,V)*B12 17.5 FC/MC/PC43B 1200 36.0 26.8 14.00 11.50 T*9(C,V)*C16 21.0 FC/MC/PC43C 1240 36.0 27.0 14.00 12.00 T*9(C,V)*C16 21.0 FC/MC/PC48C 1195 36.0 26.6 14.50 12.00 T*9(C,V)*C16 21.0 UC48C 1195 36.0 26.8 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC43C 1200 36.0 26.8 14.50 12.00 T*9(C,V)*C20 21.0 FC/MC/PC48C 1330 36.0 27.6 14.50 12.00 T*9(C,V)*C20 21.0 UC48C 1330 36.0 27.8 14.50 12.00 T*9(C,V)*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00 T*9(C,V)*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00 TM8X080B12MP11 17.5 FC/MC/PC43B 1175 36.0 26.0 13.10 11.00 TM8X080C16MP11 21.0 FC/MC/PC43C 1150 36.0 26.2 13.70 11.35 TM8X080C16MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.70 11.35 TM8X100C16MP11 21.0 FC/MC/PC43C 1150 36.0 26.2 13.70 11.35 TM8X100C16MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.70 11.35 TM8X100C20MP11 21.0 FC/MC/PC43C 1200 36.0 27.2 13.70 11.35 TM8X100C20MP11 21.0 FC/MC/PC48C 1200 36.0 27.4 13.70 11.35 TM8X120C20MP11 21.0 FC/MC/PC43C 1200 36.0 27.2 13.70 11.35 TM8X120C20MP11 21.0 FC/MC/PC48C 1200 36.0 27.4 13.70 11.35 TM9E060B12MP11 17.5 FC/MC/PC43B 1125 36.0 26.0 13.10 11.00 TM9E080B12MP11 17.5 FC/MC/PC43B 1125 36.0 26.0 13.10 11.00 TM9E080C16MP11 21.0 FC/MC/PC43C 1175 36.0 26.2 13.50 11.35 TM9E080C16MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.50 11.35 TM9E080C16MP11 21.0 UC48C 1150 35.8 24.8 13.25 11.35 TM9E100C16MP11 21.0 FC/MC/PC43C 1175 36.0 26.2 13.50 11.35 TM9E100C16MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.50 11.35 TM9E100C16MP11 21.0 UC48C 1150 35.8 24.8 13.25 11.35 TM9E100C20MP11 21.0 FC/MC/PC43C 1150 36.0 26.2 13.50 11.35 TM9E100C20MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.50 11.35 TM9E100C20MP11 21.0 UC48C 1150 35.8 24.8 13.25 11.35 TM9E120D20MP11 24.5 FC/MC/PC48D 1175 36.0 26.6 13.50 11.35 TM9E120D20MP11 24.5 UC48D 1175 35.8 24.8 13.50 11.35 TM9X060B12MP11 17.5 FC/MC/PC43B 1125 36.0 26.0 13.10 11.00 TM9X080B12MP11 17.5 FC/MC/PC43B 1125 36.0 26.0 13.10 11.00 TM9X080C16MP11 21.0 FC/MC/PC43C 1175 36.0 26.2 13.50 11.35 EER Johnson Controls Unitary Products 7
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT THJD36S4(3,4)S4 THJD42S4(3,4)S4 For Notes See Page 9. FURNACE WIDTH COIL 1 RATED CFM TOTAL 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 Net MBH COOLING SENS. SEER TM9X080C16MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.50 11.35 TM9X080C16MP11 21.0 UC48C 1150 35.8 24.8 13.25 11.35 TM9X100C16MP11 21.0 FC/MC/PC43C 1175 36.0 26.2 13.50 11.35 TM9X100C16MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.50 11.35 TM9X100C16MP11 21.0 UC48C 1150 35.8 24.8 13.25 11.35 TM9X100C20MP11 21.0 FC/MC/PC43C 1150 36.0 26.2 13.50 11.35 TM9X100C20MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.50 11.35 TM9X100C20MP11 21.0 UC48C 1150 35.8 24.8 13.25 11.35 TM9X120D20MP11 24.5 FC/MC/PC48D 1175 36.0 26.6 13.50 11.35 TM9X120D20MP11 24.5 UC48D 1175 35.8 24.8 13.50 11.35 TMLX080B12MP11 17.5 FC/MC/PC43B 1175 36.0 26.0 13.10 11.00 TMLX080C16MP11 21.0 FC/MC/PC43C 1150 36.0 26.2 13.70 11.35 TMLX080C16MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.70 11.35 TMLX080C16MP11 21.0 UC48C 1150 35.8 25.0 13.50 11.35 TMLX100C16MP11 21.0 FC/MC/PC43C 1150 36.0 26.2 13.70 11.35 TMLX100C16MP11 21.0 FC/MC/PC48C 1150 36.0 26.6 13.70 11.35 TMLX100C16MP11 21.0 UC48C 1150 35.8 25.0 13.50 11.35 TMLX100C20MP11 21.0 FC/MC/PC43C 1200 36.0 27.2 13.70 11.35 TMLX100C20MP11 21.0 FC/MC/PC48C 1200 36.0 27.4 13.70 11.35 TMLX100C20MP11 21.0 UC48C 1200 35.8 24.8 13.25 11.35 TMLX120C20MP11 21.0 FC/MC/PC43C 1200 36.0 27.2 13.70 11.35 TMLX120C20MP11 21.0 FC/MC/PC48C 1200 36.0 27.4 13.70 11.35 TMLX120C20MP11 21.0 UC48C 1200 35.8 24.8 13.25 11.35 T*(8,L)V*C16 21.0 FC/MC/PC48C 1435 40.0 29.8 13.25 11.50 T*(8,L)V*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 12.00 T*(8,L)V*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50 T*(8,L)V*C20 21.0 FC/MC/PC48C 1410 40.0 29.6 13.50 11.50 T*(8,L)V*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00 T*(8,L)V*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.00 T*9(C,V)*C16 21.0 FC/MC/PC48C 1395 40.0 29.2 13.20 11.50 T*9(C,V)*C16 21.0 FC/PC60C 1445 41.0 32.0 13.25 11.50 T*9(C,V)*C16 21.0 UC60C 1445 40.5 31.0 13.20 11.50 T*9(C,V)*C20 21.0 FC/MC/PC48C 1430 40.0 29.6 13.15 11.50 T*9(C,V)*C20 21.0 FC/PC60C 1445 41.5 32.0 13.75 11.50 T*9(C,V)*C20 21.0 UC60C 1445 41.0 31.2 13.50 11.50 T*9(C,V)*D20 24.5 FC/MC/PC48D 1450 40.5 29.8 13.25 11.50 T*9(C,V)*D20 24.5 FC/MC/PC60D 1445 41.5 32.2 13.75 11.50 T*9(C,V)*D20 24.5 UC60D 1445 41.0 31.4 13.50 11.50 TM8X080C16MP11 21.0 FC/PC60C 1350 40.0 30.2 13.50 11.35 TM8X080C16MP11 21.0 UC60C 1350 39.5 29.6 13.25 11.35 TM8X100C16MP11 21.0 FC/PC60C 1350 40.0 30.2 13.50 11.35 TM8X100C16MP11 21.0 UC60C 1350 39.5 29.6 13.25 11.35 TM8X100C20MP11 21.0 FC/PC60C 1375 40.0 30.2 13.50 11.35 TM8X100C20MP11 21.0 UC60C 1375 39.5 29.6 13.25 11.35 TM8X120C20MP11 21.0 FC/PC60C 1375 40.0 30.2 13.50 11.35 TM8X120C20MP11 21.0 UC60C 1375 39.5 29.6 13.25 11.35 TM9E120D20MP11 24.5 FC/MC/PC60D 1325 40.0 29.4 13.50 11.35 TM9E120D20MP11 24.5 UC60D 1325 39.5 29.6 13.25 11.35 EER 8 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT FURNACE WIDTH COIL 1 RATED CFM TOTAL Net MBH COOLING SENS. 571924-BTG-D-0714 SEER EER THJD42S4(3,4)S4 THJD48S4(3,4)S3 THJD60S4(3,4)S5 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 2 TM9X120D20MP11 24.5 FC/MC/PC60D 1325 40.0 29.4 13.50 11.35 TM9X120D20MP11 24.5 UC60D 1325 39.5 29.6 13.25 11.35 TMLX080C16MP11 21.0 FC/PC60C 1350 40.0 30.2 13.50 11.35 TMLX080C16MP11 21.0 UC60C 1350 39.5 29.6 13.25 11.35 TMLX100C16MP11 21.0 FC/PC60C 1350 40.0 30.2 13.50 11.35 TMLX100C16MP11 21.0 UC60C 1350 39.5 29.6 13.25 11.35 TMLX100C20MP11 21.0 FC/PC60C 1375 40.0 30.2 13.50 11.35 TMLX100C20MP11 21.0 UC60C 1375 39.5 29.6 13.25 11.35 TMLX120C20MP11 21.0 FC/PC60C 1375 40.0 30.2 13.50 11.35 TMLX120C20MP11 21.0 UC60C 1375 39.5 29.6 13.25 11.35 T*(8,L)V*C20 24.5 FC/MC62D 1670 47.0 35.3 13.00 11.00 T*9(C,V)*C20 24.5 FC/MC62D 1605 47.0 35.3 13.00 11.00 T*9(C,V)*D20 24.5 FC/MC62D 1595 47.0 35.3 13.00 11.00 TM8X100C20MP11 21.0 FC/MC62D 1575 47.0 35.2 13.00 11.00 TM8X120C20MP11 21.0 FC/MC62D 1575 47.0 35.2 13.00 11.00 TM9E100C20MP11 21.0 FC/MC62D 1550 47.0 35.2 13.00 11.00 TM9E120D20MP11 24.5 FC/MC62D 1550 47.0 35.2 13.00 11.00 TM9X100C20MP11 21.0 FC/MC62D 1550 47.0 35.2 13.00 11.00 TM9X120D20MP11 24.5 FC/MC62D 1550 47.0 35.2 13.00 11.00 TMLX100C20MP11 21.0 FC/MC62D 1575 47.0 35.2 13.00 11.00 TMLX120C20MP11 21.0 FC/MC62D 1575 47.0 35.2 13.00 11.00 T*(8,L)V*C20 21.0 FC/MC62D 1600 54.0 37.8 13.70 11.35 T*(8,L)V*C20 21.0 FC64D 1855 57.5 42.0 13.70 11.35 T*9V*C20 21.0 FC/MC62D 1655 54.0 38.5 13.70 11.35 T*9V*C20 21.0 FC64D 1655 57.0 40.5 13.70 11.35 T*9V*D20 24.5 FC/MC62D 1630 54.0 38.5 13.70 11.35 T*9V*D20 24.5 FC64D 1630 57.0 40.0 13.70 11.35 TM8X080C16MP11 21.0 FC/MC62D 1550 53.5 37.4 13.70 11.35 TM8X080C16MP11 21.0 FC64D 1550 56.5 39.0 13.70 11.35 TM8X100C16MP11 21.0 FC/MC62D 1550 53.5 37.4 13.70 11.35 TM8X100C16MP11 21.0 FC64D 1550 56.5 39.0 13.70 11.35 TM8X100C20MP11 21.0 FC/MC62D 1575 53.5 37.8 13.70 11.35 TM8X120C20MP11 21.0 FC/MC62D 1575 53.5 37.8 13.70 11.35 TM9E100C20MP11 21.0 FC/MC62D 1550 53.5 37.4 13.70 11.35 TM9E100C20MP11 21.0 FC64D 1550 56.5 39.0 13.70 11.35 TM9E120D20MP11 24.5 FC/MC62D 1550 53.5 37.4 13.70 11.35 TM9E120D20MP11 24.5 FC64D 1525 56.5 39.0 13.70 11.35 TM9X100C20MP11 21.0 FC/MC62D 1550 53.5 37.4 13.70 11.35 TM9X100C20MP11 21.0 FC64D 1550 56.5 39.0 13.70 11.35 TM9X120D20MP11 24.5 FC/MC62D 1550 53.5 37.4 13.70 11.35 TM9X120D20MP11 24.5 FC64D 1525 56.5 39.0 13.70 11.35 TMLX080C16MP11 21.0 FC/MC62D 1550 53.5 37.4 13.70 11.35 TMLX080C16MP11 21.0 FC64D 1550 56.5 39.0 13.70 11.35 TMLX100C16MP11 21.0 FC/MC62D 1550 53.5 37.4 13.70 11.35 TMLX100C16MP11 21.0 FC64D 1550 56.5 39.0 13.70 11.35 TMLX100C20MP11 21.0 FC/MC62D 1575 53.5 37.8 13.70 11.35 TMLX120C20MP11 21.0 FC/MC62D 1575 53.5 37.8 13.70 11.35 1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number. 2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. Johnson Controls Unitary Products 9
HEATING CAPACITY - With Air Handler UNIT THJD30S4(3,4)S4 THJD36S4(3,4)S4 THJD42S4(3,4)S4 THJD48S4(3,4)S3 For Notes See Page 12. AIR HANDLER COIL 1 13 SEER HP WITH AIR HANDLERS HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD AHE30B 26.6 3.40 2.29 15.5 2.42 1.88 7.70 AHE36C 26.8 3.56 2.21 15.3 2.50 1.79 7.70 AHR30B 27.6 3.30 2.45 16.2 2.32 2.05 7.70 AHR36B 27.8 3.36 2.42 16.2 2.32 2.05 7.70 AHV30B 28.0 3.48 2.36 15.5 2.30 1.97 7.70 AHV36C 27.6 3.62 2.23 15.0 2.42 1.82 8.20 MV12B FC/MC35B 26.8 3.50 2.24 15.4 2.48 1.82 8.00 MV12B FC/MC43B 27.4 3.58 2.24 15.6 2.46 1.86 8.20 MV16C FC/MC35C 27.0 3.56 2.22 15.4 2.50 1.80 8.15 MV16C FC/MC43C 27.4 3.60 2.23 15.5 2.48 1.83 8.20 MX12BN21 FC/MC35B 28.0 3.58 2.29 15.3 2.40 1.87 8.05 MX12BN21 FC/MC43B 28.6 3.68 2.28 15.4 2.42 1.86 8.05 MX16CN21 FC/MC35C 28.0 3.58 2.29 15.3 2.38 1.88 8.05 MX16CN21 FC/MC43C 28.0 3.70 2.22 14.9 2.46 1.77 8.20 AHE36C 30.6 3.44 2.61 21.6 2.84 2.23 8.20 AHE42D 30.6 3.48 2.58 21.4 2.88 2.18 8.20 AHR36B 31.4 3.28 2.80 22.6 2.68 2.47 7.70 AHR42C 31.4 3.32 2.77 22.2 2.70 2.41 7.70 AHV36C 30.8 3.42 2.64 22.0 2.78 2.32 8.00 AHV42D 30.6 3.46 2.59 21.6 2.88 2.20 8.20 MV12B FC/MC43B 34.2 3.58 2.80 21.8 2.76 2.31 8.20 MV12D FC/MC48D 33.8 3.70 2.68 21.6 2.86 2.21 8.20 MV16C FC/MC43C 33.8 3.60 2.75 21.6 2.78 2.28 8.20 MV16C FC/MC48C 34.0 3.64 2.74 21.8 2.82 2.27 8.20 MX12BN21 FC/MC43B 31.2 3.38 2.70 22.2 2.78 2.34 7.75 MX16CN21 FC/MC43C 31.6 3.42 2.71 22.4 2.80 2.34 7.75 MX12DN21 FC/MC48D 31.0 3.48 2.61 21.8 2.88 2.22 8.05 MX16CN21 FC/MC48C 31.6 3.44 2.69 22.4 2.78 2.36 7.75 MX20DN21 FC/MC48D 31.4 3.54 2.60 22.0 2.90 2.22 8.20 AHE48D 39.5 3.86 3.00 22.2 2.58 2.52 8.00 AHR48D 40.0 3.66 3.20 22.4 2.48 2.65 7.70 AHV48D 39.5 3.86 3.00 21.0 2.54 2.42 8.20 MV16C FC/MC48C 36.0 3.58 2.95 23.4 2.76 2.48 8.20 MV16C FC/MC60C 39.5 3.90 2.97 22.4 2.62 2.51 8.20 MV20D FC/MC48D 36.0 3.66 2.88 23.4 2.82 2.43 8.20 MV20D FC/MC60D 39.5 3.94 2.94 22.2 2.66 2.45 8.20 MX16CN21 FC/MC60C 40.5 3.82 3.11 21.6 2.44 2.59 7.75 MX20DN21 FC/MC60D 40.0 3.92 2.99 21.2 2.52 2.46 8.05 AHE48D 45.5 3.68 3.62 26.8 2.84 2.76 8.20 AHV48D 45.5 3.90 3.42 26.2 2.70 2.84 8.20 AHV60D 46.0 3.98 3.39 26.6 2.74 2.84 8.20 MV20D FC/MC60D 46.0 4.00 3.10 27.0 2.78 1.82 8.20 MV20D FC/MC62D 46.0 4.00 3.10 27.0 2.78 1.82 8.20 MX16CN21 FC60C 46.5 4.02 3.39 26.4 2.76 2.80 7.75 MX20DN21 FC/MC60D 46.0 4.14 3.26 26.0 2.84 2.68 7.75 MX20DN21 FC/MC62D 45.0 4.18 3.22 21.4 2.54 2.47 7.75 10 Johnson Controls Unitary Products
HEATING CAPACITY - With Air Handler (Continued) UNIT AIR HANDLER COIL 1 HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 13 SEER HP WITH AIR HANDLERS AHE60D 57.0 3.74 4.47 35.2 2.72 3.79 7.75 AHR60D 57.5 3.62 4.65 35.8 2.64 3.97 7.70 AHV60D 56.0 3.56 4.61 34.8 2.60 3.92 7.75 THJD60S4(3,4)S5 MV20D FC/MC62D 57.0 3.68 4.54 35.4 2.68 3.87 7.75 MV20D FC64D 58.0 3.70 4.59 30.6 2.40 3.74 7.75 MX20DN21 FC/MC62D 55.5 3.70 4.39 35.8 1.10 2.53 8.20 MX20DN21 FC64D 56.0 3.74 4.39 35.8 0.96 2.50 7.75 1. Rated CFM same as for cooling. 2. Heating MBH based on AHRI standards of 70 DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. MA Modular Air Handlers use Coil Only Ratings. HEATING CAPACITY - Upflow, Downflow, and Horizontal Furnaces and Coils (Coil Only Ratings) UNIT COIL 1 HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 13 SEER HP COIL ONLY RATINGS FC/MC/PC32 27.4 3.28 2.45 16.0 2.30 2.04 7.70 THJD30S4(3,4)S4 THJD36S4(3,4)S4 THJD42S4(3,4)S4 THJD60S4(3,4)S5 FC/MC/PC35 27.4 3.28 2.45 16.0 2.30 2.04 7.70 FC/MC/PC37 28.0 3.38 2.43 16.1 2.32 2.03 7.70 FC/MC/PC43 28.0 3.38 2.43 16.1 2.32 2.03 7.70 FC/MC/PC37 34.4 3.42 2.95 22.4 2.62 2.51 8.00 FC/MC/PC43 34.6 3.40 2.98 22.2 2.60 2.50 8.00 FC/MC/PC48 34.8 3.44 2.96 22.6 2.64 2.51 8.00 UC48 35.0 3.52 2.91 22.4 2.62 2.51 8.00 FC/MC/PC60 40.5 3.72 3.19 23.0 2.50 2.70 7.70 UC60 40.0 3.68 3.18 22.8 2.48 2.69 7.70 FC/MC62 57.5 3.64 4.63 35.6 2.66 3.92 7.75 FC64 58.0 3.68 4.62 31.8 2.40 3.88 7.75 1. Rated CFM same as for cooling. 2. Heating MBH based on ARI standards of 70 F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. MA Modular Air Handlers use Coil Only Ratings. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. Johnson Controls Unitary Products 11
HEATING CAPACITY - With High Efficiency Motor Furnaces UNIT S THJD30S4(3,4)S4 For Notes See Page 15. FURNACE COIL 1 HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 T*(8,L)V*A12 FC/MC/PC32A 27.4 3.30 2.43 16.0 2.32 2.02 7.85 T*(8,L)V*A12 FC/MC/PC37A 27.2 3.48 2.29 15.7 2.42 1.90 8.05 T*(8,L)V*B12 FC/MC/PC35B 27.0 3.42 2.31 15.6 2.42 1.89 7.95 T*(8,L)V*B12 FC/MC/PC43B 27.6 3.52 2.30 15.7 2.42 1.90 8.15 T*(8,L)V*C16 FC/MC/PC35C 26.8 3.48 2.26 15.5 2.44 1.86 8.00 T*(8,L)V*C16 FC/MC/PC43C 27.4 3.60 2.23 15.5 2.50 1.82 8.20 T*(8,L)V*C20 FC/MC/PC35C 27.2 3.50 2.28 15.5 2.44 1.86 8.10 T*(8,L)V*C20 FC/MC/PC43C 27.2 3.62 2.20 15.5 2.50 1.82 8.20 T*9(C,V)*B12 FC/MC/PC35B 27.2 3.36 2.37 15.8 2.36 1.96 7.90 T*9(C,V)*B12 FC/MC/PC43B 27.6 3.48 2.32 15.8 2.40 1.93 8.10 T*9(C,V)*C16 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00 T*9(C,V)*C16 FC/MC/PC43C 27.4 3.54 2.27 15.7 2.44 1.89 8.15 T*9(C,V)*C20 FC/MC/PC35C 26.8 3.46 2.27 15.5 2.44 1.86 8.00 T*9(C,V)*D20 FC/MC/PC43C 27.4 3.58 2.24 15.5 2.48 1.83 8.20 TM8X080B12MP11 FC/MC/PC35B 27.8 3.50 2.33 15.2 2.30 1.94 7.75 TM8X080B12MP11 FC/MC/PC43B 28.6 3.66 2.29 15.4 2.40 1.88 8.20 TM8X080C16MP11 FC/MC/PC35C 28.0 3.62 2.27 15.2 2.42 1.84 8.20 TM8X080C16MP11 FC/MC/PC43C 28.2 3.66 2.26 15.1 2.42 1.83 8.20 TM8X100C16MP11 FC/MC/PC35C 28.0 3.62 2.27 15.2 2.42 1.84 8.20 TM8X100C16MP11 FC/MC/PC43C 28.2 3.66 2.26 15.1 2.42 1.83 8.20 TM8X100C20MP11 FC/MC/PC35C 28.0 3.60 2.28 15.2 2.40 1.86 8.20 TM8X100C20MP11 FC/MC/PC43C 28.4 3.68 2.26 15.3 2.42 1.85 8.20 TM8X120C20MP11 FC/MC/PC35C 28.0 3.60 2.28 15.2 2.40 1.86 8.20 TM8X120C20MP11 FC/MC/PC43C 28.4 3.68 2.26 15.3 2.42 1.85 8.20 TM9E060B12MP11 FC/MC/PC35B 28.0 3.48 2.36 15.3 2.30 1.95 7.75 TM9E060B12MP11 FC/MC/PC43B 28.4 3.58 2.32 15.3 2.36 1.90 7.75 TM9E080B12MP11 FC/MC/PC35B 28.0 3.48 2.36 15.3 2.30 1.95 7.75 TM9E080B12MP11 FC/MC/PC43B 28.4 3.58 2.32 15.3 2.36 1.90 7.75 TM9E080C16MP11 FC/MC/PC35C 28.0 3.60 2.28 15.3 2.40 1.87 8.20 TM9E080C16MP11 FC/MC/PC43C 28.6 3.68 2.28 15.3 2.42 1.85 8.20 TM9E100C16MP11 FC/MC/PC35C 28.0 3.60 2.28 15.3 2.40 1.87 8.20 TM9E100C16MP11 FC/MC/PC43C 28.6 3.68 2.28 15.3 2.42 1.85 8.20 TM9E100C20MP11 FC/MC/PC35C 28.4 3.46 2.40 15.6 2.30 1.99 7.75 TM9E100C20MP11 FC/MC/PC43C 28.8 3.56 2.37 15.7 2.32 1.98 7.75 TM9X060B12MP11 FC/MC/PC35B 28.0 3.48 2.36 15.3 2.30 1.95 7.75 TM9X060B12MP11 FC/MC/PC43B 28.4 3.58 2.32 15.3 2.36 1.90 7.75 TM9X080B12MP11 FC/MC/PC35B 28.0 3.48 2.36 15.3 2.30 1.95 7.75 TM9X080B12MP11 FC/MC/PC43B 28.4 3.58 2.32 15.3 2.36 1.90 7.75 TM9X080C16MP11 FC/MC/PC35C 28.0 3.60 2.28 15.3 2.40 1.87 8.20 TM9X080C16MP11 FC/MC/PC43C 28.6 3.68 2.28 15.3 2.42 1.85 8.20 TM9X100C16MP11 FC/MC/PC35C 28.0 3.60 2.28 15.3 2.40 1.87 8.20 TM9X100C16MP11 FC/MC/PC43C 28.6 3.68 2.28 15.3 2.42 1.85 8.20 TM9X100C20MP11 FC/MC/PC35C 28.4 3.46 2.40 15.6 2.30 1.99 7.75 TM9X100C20MP11 FC/MC/PC43C 28.8 3.56 2.37 15.7 2.32 1.98 7.75 TMLX080B12MP11 FC/MC/PC35B 27.8 3.50 2.33 15.2 2.30 1.94 7.75 TMLX080B12MP11 FC/MC/PC43B 28.6 3.66 2.29 15.4 2.40 1.88 8.20 TMLX080C16MP11 FC/MC/PC35C 28.0 3.62 2.27 15.2 2.42 1.84 8.20 TMLX080C16MP11 FC/MC/PC43C 28.2 3.66 2.26 15.1 2.42 1.83 8.20 TMLX100C16MP11 FC/MC/PC35C 28.0 3.62 2.27 15.2 2.42 1.84 8.20 12 Johnson Controls Unitary Products
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT S THJD30S4(3,4)S4 THJD36S4(3,4)S4 For Notes See Page 15. FURNACE COIL 1 HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 TMLX100C16MP11 FC/MC/PC43C 28.2 3.66 2.26 15.1 2.42 1.83 8.20 TMLX100C20MP11 FC/MC/PC35C 28.0 3.60 2.28 15.2 2.40 1.86 8.20 TMLX100C20MP11 FC/MC/PC43C 28.4 3.68 2.26 15.3 2.42 1.85 8.20 TMLX120C20MP11 FC/MC/PC35C 28.0 3.60 2.28 15.2 2.40 1.86 8.20 TMLX120C20MP11 FC/MC/PC43C 28.4 3.68 2.26 15.3 2.42 1.85 8.20 T*(8,L)V*A12 FC/MC/PC37A 34.0 3.46 2.88 22.2 2.66 2.45 8.20 T*(8,L)V*B12 FC/MC/PC43B 34.6 3.48 2.91 22.4 2.66 2.47 8.20 T*(8,L)V*C16 FC/MC/PC43C 34.0 3.56 2.80 21.6 2.74 2.31 8.20 T*(8,L)V*C16 FC/MC/PC48C 34.2 3.62 2.77 21.8 2.78 2.30 8.20 T*(8,L)V*C16 UC48C 34.4 3.72 2.71 21.6 2.78 2.28 8.20 T*(8,L)V*C20 FC/MC/PC43C 33.8 3.58 2.77 21.6 2.76 2.29 8.20 T*(8,L)V*C20 FC/MC/PC48C 34.0 3.66 2.72 21.8 2.82 2.27 8.20 T*(8,L)V*C20 UC48C 34.4 3.74 2.69 21.6 2.80 2.26 8.20 T*9(C,V)*B12 FC/MC/PC43B 34.2 3.48 2.88 22.0 2.66 2.42 8.20 T*9(C,V)*C16 FC/MC/PC43C 34.0 3.52 2.83 22.0 2.70 2.39 8.20 T*9(C,V)*C16 FC/MC/PC48C 34.2 3.58 2.80 22.0 2.76 2.34 8.20 T*9(C,V)*C16 UC48C 34.6 3.68 2.75 21.8 2.76 2.31 8.20 T*9(C,V)*C20 FC/MC/PC48C 34.8 3.60 2.83 22.4 2.74 2.40 8.20 T*9(C,V)*C20 UC48C 35.2 3.68 2.80 22.4 2.74 2.40 8.20 T*9(C,V)*D20 FC/MC/PC43C 34.0 3.56 2.80 21.8 2.74 2.33 8.20 T*9(C,V)*D20 FC/MC/PC48D 34.2 3.60 2.78 21.8 2.78 2.30 8.20 T*9(C,V)*D20 UC48D 34.6 3.70 2.74 21.8 2.76 2.31 8.20 TM8X080B12MP11 FC/MC/PC43B 31.0 3.22 2.82 22.2 2.66 2.45 7.70 TM8X080C16MP11 FC/MC/PC43C 30.8 3.32 2.72 21.8 2.74 2.33 7.75 TM8X080C16MP11 FC/MC/PC48C 30.8 3.34 2.70 21.8 2.74 2.33 7.75 TM8X100C16MP11 FC/MC/PC43C 30.8 3.32 2.72 21.8 2.74 2.33 7.75 TM8X100C16MP11 FC/MC/PC48C 30.8 3.34 2.70 21.8 2.74 2.33 7.75 TM8X100C20MP11 FC/MC/PC43C 31.0 3.34 2.72 22.2 2.74 2.37 7.75 TM8X100C20MP11 FC/MC/PC48C 31.2 3.38 2.70 22.0 2.74 2.35 7.75 TM8X120C20MP11 FC/MC/PC43C 31.0 3.34 2.72 22.2 2.74 2.37 7.75 TM8X120C20MP11 FC/MC/PC48C 31.2 3.38 2.70 22.0 2.74 2.35 7.75 TM9E060B12MP11 FC/MC/PC43B 31.0 3.22 2.82 22.2 2.66 2.45 7.70 TM9E080B12MP11 FC/MC/PC43B 31.0 3.22 2.82 22.2 2.66 2.45 7.70 TM9E080C16MP11 FC/MC/PC43C 30.8 3.28 2.75 22.0 2.70 2.39 7.75 TM9E080C16MP11 FC/MC/PC48C 31.0 3.30 2.75 22.0 2.72 2.37 7.75 TM9E080C16MP11 UC48C 30.0 3.14 2.80 21.8 2.64 2.42 7.75 TM9E100C16MP11 FC/MC/PC43C 30.8 3.28 2.75 22.0 2.70 2.39 7.75 TM9E100C16MP11 FC/MC/PC48C 31.0 3.30 2.75 22.0 2.72 2.37 7.75 TM9E100C16MP11 UC48C 30.0 3.14 2.80 21.8 2.64 2.42 7.75 TM9E100C20MP11 FC/MC/PC43C 30.8 3.30 2.73 21.8 2.72 2.35 7.75 TM9E100C20MP11 FC/MC/PC48C 30.8 3.32 2.72 22.0 2.72 2.37 7.75 TM9E100C20MP11 UC48C 30.0 3.14 2.80 21.8 2.64 2.42 7.75 TM9E120D20MP11 FC/MC/PC48D 30.8 3.34 2.70 21.8 2.74 2.33 7.75 TM9E120D20MP11 UC48D 30.0 3.16 2.78 21.6 2.66 2.38 7.75 TM9X060B12MP11 FC/MC/PC43B 31.0 3.22 2.82 22.2 2.66 2.45 7.70 TM9X080B12MP11 FC/MC/PC43B 31.0 3.22 2.82 22.2 2.66 2.45 7.70 TM9X080C16MP11 FC/MC/PC43C 30.8 3.28 2.75 22.0 2.70 2.39 7.75 TM9X080C16MP11 FC/MC/PC48C 31.0 3.30 2.75 22.0 2.72 2.37 7.75 TM9X080C16MP11 UC48C 30.0 3.14 2.80 21.8 2.64 2.42 7.75 Johnson Controls Unitary Products 13
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT S THJD36S4(3,4)S4 THJD42S4(3,4)S4 For Notes See Page 15. FURNACE COIL 1 HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 TM9X100C16MP11 FC/MC/PC43C 30.8 3.28 2.75 22.0 2.70 2.39 7.75 TM9X100C16MP11 FC/MC/PC48C 31.0 3.30 2.75 22.0 2.72 2.37 7.75 TM9X100C16MP11 UC48C 30.0 3.14 2.80 21.8 2.64 2.42 7.75 TM9X100C20MP11 FC/MC/PC43C 30.8 3.30 2.73 21.8 2.72 2.35 7.75 TM9X100C20MP11 FC/MC/PC48C 30.8 3.32 2.72 22.0 2.72 2.37 7.75 TM9X100C20MP11 UC48C 30.0 3.14 2.80 21.8 2.64 2.42 7.75 TM9X120D20MP11 FC/MC/PC48D 30.8 3.34 2.70 21.8 2.74 2.33 7.75 TM9X120D20MP11 UC48D 30.0 3.16 2.78 21.6 2.66 2.38 7.75 TMLX080B12MP11 FC/MC/PC43B 31.0 3.22 2.82 22.2 2.66 2.45 7.70 TMLX080C16MP11 FC/MC/PC43C 30.8 3.32 2.72 21.8 2.74 2.33 7.75 TMLX080C16MP11 FC/MC/PC48C 30.8 3.34 2.70 21.8 2.74 2.33 7.75 TMLX080C16MP11 UC48C 30.0 3.18 2.76 21.6 2.68 2.36 7.75 TMLX100C16MP11 FC/MC/PC43C 30.8 3.32 2.72 21.8 2.74 2.33 7.75 TMLX100C16MP11 FC/MC/PC48C 30.8 3.34 2.70 21.8 2.74 2.33 7.75 TMLX100C16MP11 UC48C 30.0 3.18 2.76 21.6 2.68 2.36 7.75 TMLX100C20MP11 FC/MC/PC43C 31.0 3.34 2.72 22.2 2.74 2.37 7.75 TMLX100C20MP11 FC/MC/PC48C 31.2 3.38 2.70 22.0 2.74 2.35 7.75 TMLX100C20MP11 UC48C 30.0 3.16 2.78 21.8 2.66 2.40 7.75 TMLX120C20MP11 FC/MC/PC43C 31.0 3.34 2.72 22.2 2.74 2.37 7.75 TMLX120C20MP11 FC/MC/PC48C 31.2 3.38 2.70 22.0 2.74 2.35 7.75 TMLX120C20MP11 UC48C 30.0 3.16 2.78 21.8 2.66 2.40 7.75 T*(8,L)V*C16 FC/MC/PC48C 36.4 3.58 2.98 23.6 2.74 2.52 8.20 T*(8,L)V*C16 FC/PC60C 40.0 3.88 3.02 22.4 2.60 2.52 8.20 T*(8,L)V*C16 UC60C 39.5 3.84 3.01 22.4 2.58 2.54 8.20 T*(8,L)V*C20 FC/MC/PC48C 36.2 3.58 2.96 23.6 2.76 2.51 8.20 T*(8,L)V*C20 FC/PC60C 39.5 3.92 2.95 22.4 2.64 2.49 8.20 T*(8,L)V*C20 UC60C 39.5 3.92 2.95 22.4 2.64 2.49 8.20 T*9(C,V)*C16 FC/MC/PC48C 36.2 3.52 3.01 23.8 2.70 2.58 8.20 T*9(C,V)*C16 FC/PC60C 40.0 3.78 3.10 22.8 2.54 2.63 8.20 T*9(C,V)*C16 UC60C 40.0 3.78 3.10 22.8 2.54 2.63 8.20 T*9(C,V)*C20 FC/MC/PC48C 36.4 3.52 3.03 23.8 2.70 2.58 8.20 T*9(C,V)*C20 FC/PC60C 40.0 3.82 3.07 22.6 2.56 2.59 8.20 T*9(C,V)*C20 UC60C 40.0 3.82 3.07 22.6 2.56 2.59 8.20 T*9(C,V)*D20 FC/MC/PC48D 36.4 3.56 3.00 23.8 2.74 2.55 8.20 T*9(C,V)*D20 FC/MC/PC60D 40.0 3.86 3.04 22.6 2.60 2.55 8.20 T*9(C,V)*D20 UC60D 40.0 3.86 3.04 22.6 2.60 2.55 8.20 TM8X080C16MP11 FC/PC60C 40.5 3.80 3.12 21.6 2.44 2.59 7.75 TM8X080C16MP11 UC60C 40.0 3.76 3.12 21.4 2.40 2.61 7.75 TM8X100C16MP11 FC/PC60C 40.5 3.80 3.12 21.6 2.44 2.59 7.75 TM8X100C16MP11 UC60C 40.0 3.74 3.13 21.4 2.40 2.61 7.75 TM8X100C20MP11 FC/PC60C 40.5 3.80 3.12 21.6 2.44 2.59 7.75 TM8X100C20MP11 UC60C 40.0 3.76 3.12 21.4 2.40 2.61 7.75 TM8X120C20MP11 FC/PC60C 40.5 3.80 3.12 21.6 2.44 2.59 7.75 TM8X120C20MP11 UC60C 40.0 3.76 3.12 21.4 2.40 2.61 7.75 TM9E120D20MP11 FC/MC/PC60D 40.0 3.76 3.12 21.6 2.44 2.59 7.75 TM9E120D20MP11 UC60D 40.0 3.76 3.12 21.4 2.40 2.61 7.75 TM9X120D20MP11 FC/MC/PC60D 40.0 3.76 3.12 21.6 2.44 2.59 7.75 TM9X120D20MP11 UC60D 40.0 3.76 3.12 21.4 2.40 2.61 7.75 TMLX080C16MP11 FC/PC60C 40.5 3.80 3.12 21.6 2.44 2.59 7.75 14 Johnson Controls Unitary Products
HEATING CAPACITY - With High Efficiency Motor Furnaces (Continued) UNIT S THJD42S4(3,4)S4 THJD48S4(3,4)S3 THJD60S4(3,4)S5 FURNACE COIL 1 HEATING 2 47 F 17 F HSPF MBH COP KW MBH COP KW STD 13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES 3 TMLX080C16MP11 UC60C 40.0 3.74 3.13 21.4 2.40 2.61 7.75 TMLX100C16MP11 FC/PC60C 40.5 3.80 3.12 21.6 2.44 2.59 7.75 TMLX100C16MP11 UC60C 40.0 3.74 3.13 21.4 2.40 2.61 7.75 TMLX100C20MP11 FC/PC60C 40.5 3.80 3.12 21.6 2.44 2.59 7.75 TMLX100C20MP11 UC60C 40.0 3.76 3.12 21.4 2.40 2.61 7.75 TMLX120C20MP11 FC/PC60C 40.5 3.80 3.12 21.6 2.44 2.59 7.75 TMLX120C20MP11 UC60C 40.0 3.76 3.12 21.4 2.40 2.61 7.75 T*(8,L)V*C20 FC/MC62D 46.0 4.00 3.10 27.0 2.78 2.82 7.70 T*9(C,V)*C20 FC/MC62D 46.0 4.00 3.10 27.0 2.78 2.82 7.70 T*9(C,V)*D20 FC/MC62D 46.0 4.00 3.10 27.0 2.78 2.82 7.70 TM8X100C20MP11 FC/MC62D 44.0 4.04 3.19 21.8 2.44 2.62 7.70 TM8X120C20MP11 FC/MC62D 44.0 4.04 3.19 21.8 2.44 2.62 7.70 TM9E100C20MP11 FC/MC62D 44.0 4.00 3.22 22.0 2.42 2.66 7.70 TM9E120D20MP11 FC/MC62D 44.0 4.02 3.21 21.8 2.42 2.64 7.70 TM9X100C20MP11 FC/MC62D 44.0 4.00 3.22 22.0 2.42 2.66 7.70 TM9X120D20MP11 FC/MC62D 44.0 4.02 3.21 21.8 2.42 2.64 7.70 TMLX100C20MP11 FC/MC62D 44.0 4.04 3.19 21.8 2.44 2.62 7.70 TMLX120C20MP11 FC/MC62D 44.0 4.04 3.19 21.8 2.44 2.62 7.70 T*(8,L)V*C20 FC/MC62D 56.5 3.52 4.70 35.0 2.56 4.01 7.75 T*(8,L)V*C20 FC64D 58.0 3.68 4.62 30.8 2.38 3.79 7.75 T*9V*C20 FC/MC62D 56.5 3.56 4.65 35.0 2.60 3.94 7.75 T*9V*C20 FC64D 57.5 3.58 4.71 30.4 2.32 3.84 7.75 T*9V*D20 FC/MC62D 56.5 3.56 4.65 35.0 2.60 3.94 7.75 T*9V*D20 FC64D 57.0 3.58 4.67 30.4 2.32 3.84 7.75 TM8X080C16MP11 FC/MC62D 55.0 3.46 4.66 35.8 1.08 2.63 7.75 TM8X080C16MP11 FC64D 56.0 3.50 4.69 35.8 0.94 2.59 7.75 TM8X100C16MP11 FC/MC62D 55.0 3.46 4.66 35.8 1.08 2.63 7.75 TM8X100C16MP11 FC64D 56.0 3.50 4.69 35.8 0.94 2.59 7.75 TM8X100C20MP11 FC/MC62D 55.0 3.52 4.58 35.8 1.08 2.60 7.75 TM8X120C20MP11 FC/MC62D 55.0 3.52 4.58 35.8 1.08 2.60 7.75 TM9E100C20MP11 FC/MC62D 55.0 3.48 4.63 35.8 1.08 2.60 7.75 TM9E100C20MP11 FC64D 56.0 3.50 4.69 35.8 0.94 2.59 7.75 TM9E120D20MP11 FC/MC62D 55.0 3.48 4.63 35.8 1.08 2.60 7.75 TM9E120D20MP11 FC64D 55.5 3.48 4.67 35.8 0.94 2.59 7.75 TM9X100C20MP11 FC/MC62D 55.0 3.48 4.63 35.8 1.08 2.60 7.75 TM9X100C20MP11 FC64D 56.0 3.50 4.69 35.8 0.94 2.59 7.75 TM9X120D20MP11 FC/MC62D 55.0 3.48 4.63 35.8 1.08 2.60 7.75 TM9X120D20MP11 FC64D 55.5 3.48 4.67 35.8 0.94 2.59 7.75 TMLX080C16MP11 FC/MC62D 55.0 3.48 4.63 35.8 1.08 2.63 7.75 TMLX080C16MP11 FC64D 56.0 3.50 4.69 35.8 0.94 2.59 7.75 TMLX100C16MP11 FC/MC62D 55.0 3.46 4.66 35.8 1.08 2.63 7.75 TMLX100C16MP11 FC64D 56.0 3.50 4.69 35.8 0.94 2.59 7.75 TMLX100C20MP11 FC/MC62D 55.0 3.52 4.58 35.8 1.08 2.60 7.75 TMLX120C20MP11 FC/MC62D 55.0 3.52 4.58 35.8 1.08 2.60 7.75 1. Rated CFM same as for cooling. 2. eating MBH based on ARI standards of 70 F DB (Dry Bulb) entering indoor air, 72% RH (Relative Humidity) outdoor air with 25 feet of interconnecting piping and no supplemental electric heat operation. 3. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard. COP equals MBH output divided by (total KW input x 3.412). HSPF (Heating Seasonal Performance Factor) is the total heating output during a normal annual usage period for heating divided by the total electric power input during the same period. = Not Applicable. PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings. Johnson Controls Unitary Products 15
ACCESSORIES Refer to Price Manual for specific model numbers. Application Limits Maximum Lineset Equivalent Length 75 Ft Outdoor Ambient Temperature Limits Maximum DB 115 F Cooling Operation Minimum DB 50 F Maximum DB 75 F Heating Operation Minimum DB -10 F Low Ambient Pressure Switch Kit (S1-2LA06700424) - Allows the use of air conditioning at low outdoor ambient temperatures down to +20 F (-7 C). For use with single-stage models containing R-410A refrigerant only. TXV Kits - S1-1TVM series thermal expansion valves precisely meter refrigerant for optimum performance over a wide range of conditions. See System Charge table for TXV part number for each model. Blower Time Delay - Available to increase efficiency when installed. Installs on indoor section and maintains blower for approximately one minute after cooling thermostat has been satisfied. Low Temperature Cutout (S1-2LT06700224) - Prevents heat pump operation below -10 F ambient temperature. Compressor Blanket - Designed to further reduce the normal operating sound. Outdoor Thermostat (S1-2TD06700124) - Provides additional staging of supplemental electric heat. Long Lineset Applications - For installations with more than 75' of equivalent lineset length, refer to the current version of the Piping Application Guide 247077-UAD-H-0209, available in the Application Bulletins section on UPGnet. Thermostats - Compatible thermostat controls are available through accessory sourcing. For optimum performance and installation, refer to the UPGNET Low Voltage Wiring Diagram document to select and apply controls. SOUND LEVEL - TYPICAL OCTAVE BAND SPECTRUM (without tone adjustment) Size Test Condition 63 125 250 500 1000 2000 4000 8000 dba SQI 30 Cooling Mode 73 70 69 71 72 66 69 63 76 19.2 30 Heating Mode 71 73 69 71 73 68 65 62 76 19.1 36 Cooling Mode 72 73 71 72 73 67 66 63 76 19.0 36 Heating Mode 70 72 69 70 71 69 65 64 75 19.2 42 Cooling Mode 71 71 73 73 72 67 67 64 77 19.1 42 Heating Mode 71 71 71 72 72 69 69 65 77 19.1 48 Cooling Mode 73 73 72 71 73 70 68 64 77 19.1 48 Heating Mode 72 74 72 71 73 72 67 63 78 19.1 60 Cooling Mode 69 69 69 70 70 65 64 63 74 19.2 60 Heating Mode 68 69 68 69 71 65 63 62 74 19.0 Rated in accordance with ARI Standard 270. 16 Johnson Controls Unitary Products
TYPICAL INSTALLATION 60 OVERHEAD CLEARANCE MINIMUM 18 SERVICE ACCESS CLEARANCE ON ONE SIDE WEATHERPROOF DISCONNECT SWITCH THERMOSTAT NEC CLASS 1 WIRING NEC CLASS 2 WIRING 10 CLEARANCE AROUND PERIMETER TO FURNACE OR AIR HANDLER TERMINAL BLOCK TO INDOOR COIL NOTES: ALL OUTDOOR WIRING MUST BE WEATHERPROOF. MINIMUM 24 UNIT TO UNIT CLEARANCE. CONTROL ACCESS PANEL SEAL OPENING(S) WITH PERMAGUM OR EQUIVALENT TYPICAL FIELD WIRING ALL FIELD WIRING TO BE IN ACCORDANCE WITH ELECTRIC CODE (NEC) AND/OR LOCAL CODES THERMOSTAT INDOOR UNIT OUTDOOR UNIT 3,4 LOW VOLTAGE TERMINAL BLOCK IN AIR HANDLER WITH ELECTRIC HEAT DEFROST CONTROL R R RED R BorC C BLK C CONTACTOR Y Y YEL Y O O ORG O T3 T2 T1 W W2 WHT W M LorX PUR X L3 L2 L1 G G BRN W1/66 T 2 1 FIELD W1 5 GRY CC INSTALLED E 2 JUMPER GND. SCREW 1 JUMPER TERMINALS E AND W TO HEAT ON FIRST STAGE DURING EMERGENCY HEAT. 2 TERMINAL NOT USED ON ALL THERMOSTATS. GND. LUG POWER WIRING 24V CONTROL WIRING (NEC CLASS 2) 3 4 5 GRAY FOR USE WITH OPTIONAL OUTDOOR THERMOSTAT KITS. POWER SUPPLY 208/230-3-60 460-3-60 POWER WIRING 208/230-3-60 460-3-60 CHECK THE LOW VOLTAGE TERMINAL BLOCK ON THE INDOOR UNIT FOR THE ACTUAL ARRANGEMENT OF THE TERMINALS. CONNECT POWER WIRING TO TERMINAL BLOCK 3TB ON UNITS WITHOUT ELECTRIC HEAT OR CIRCUIT BREAKER. Johnson Controls Unitary Products 17
COOLING PERFORMANCE DATA CONDENSING UNIT NO. THJD30S4(3,4)S4 INDOOR COIL NO. AHP30 AIR TEMP. IDCFM 800 1000 1200 ENTERING ID DB ( F) 80 80 75 80 80 80 80 75 80 80 80 80 75 80 80 OUTDOOR UNIT ( F) ID WB ( F) 57 62 62 67 72 57 62 62 67 72 57 62 62 67 72 T.C. 29.1 31.3 31.4 34.3 36.1 31.0 32.7 32.8 35.2 36.6 33.0 34.1 34.1 36.1 37.2 65 S.C. 28.0 24.7 21.2 21.0 17.8 29.9 27.9 23.3 22.4 18.2 31.8 31.1 25.4 23.8 18.6 KW 2.00 2.00 2.00 2.10 2.00 2.10 2.10 2.10 2.10 2.10 2.20 2.20 2.20 2.20 2.20 T.C. 27.4 29.1 29.2 32.3 34.3 29.3 30.4 30.4 33.2 34.9 31.3 31.6 31.6 34.0 35.5 75 S.C. 26.4 23.7 20.2 20.1 16.8 28.3 26.5 22.3 21.7 17.4 30.2 29.3 24.4 23.3 18.0 KW 2.10 2.20 2.20 2.20 2.20 2.20 2.30 2.30 2.30 2.30 2.30 2.40 2.30 2.30 2.30 T.C. 25.7 26.9 27.0 30.3 32.5 27.6 28.0 28.0 31.1 33.2 29.6 29.1 29.1 31.9 33.9 85 S.C. 24.8 22.7 19.2 19.3 15.8 26.6 25.1 21.3 21.0 16.6 28.5 27.5 23.3 22.7 17.3 KW 2.20 2.30 2.30 2.30 2.40 2.40 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.50 T.C. 24.0 24.7 24.7 28.2 30.8 25.9 25.7 25.7 29.1 31.5 27.8 26.7 26.6 29.9 32.2 95 S.C. 23.1 21.8 18.2 18.4 14.8 25.0 23.7 20.2 20.3 15.8 26.8 25.7 22.3 22.1 16.7 KW 2.40 2.40 2.40 2.50 2.50 2.50 2.50 2.50 2.60 2.60 2.60 2.60 2.60 2.70 2.70 T.C. 21.8 22.2 21.8 25.3 28.3 23.6 23.5 22.6 26.1 29.0 25.4 24.8 23.4 26.9 29.7 105 S.C. 21.0 20.4 17.0 17.3 13.8 22.8 22.2 18.9 19.2 14.8 24.5 24.0 20.9 21.1 15.8 KW 2.50 2.50 2.50 2.60 2.70 2.70 2.70 2.60 2.70 2.80 2.80 2.80 2.70 2.80 2.90 T.C. 19.7 19.6 19.0 22.3 25.8 21.4 21.3 19.6 23.2 26.5 23.0 23.0 20.2 24.0 27.1 115 S.C. 19.0 18.9 15.8 16.1 12.7 20.6 20.6 17.6 18.0 13.8 22.2 22.2 19.5 20.0 14.9 KW 2.70 2.70 2.70 2.70 2.80 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 3.00 3.10 T.C. 17.5 17.1 16.1 19.4 23.4 19.1 19.1 16.5 20.3 24.0 20.7 21.2 16.9 21.1 24.6 125 S.C. 16.9 17.1 14.6 14.9 11.7 18.4 19.0 16.3 16.9 12.8 19.9 20.4 16.9 18.9 13.9 KW 2.80 2.80 2.80 2.90 2.90 2.90 2.90 2.90 3.00 3.10 3.10 3.10 3.00 3.10 3.30 NOTE: ALL CAPACITIES INCLUDE INDOOR FAN HEAT. KW VALUES ARE FOR THE SYSTEM (OUTDOOR + INDOOR). Multipliers for determining the performance with other indoor sections. NOTE: For dry bulb temperatures different than those listed (between 73-87 F), sensible capacity increases by 1060 BTUH per 1000 CFM per degree above the listed temperature and decreases by 1060 BTUH per 1000 CFM per degree below the listed temperature. Air Handlers Coils T.C. S.C. KW FC/MC/PC32 0.99 0.98 1.02 FC/MC/PC35 0.99 0.98 1.02 FC/MC/PC37 1.00 1.00 1.02 FC/MC/PC43 1.00 1.00 1.02 AHE30B 1.00 0.97 0.94 AHE36C 1.02 1.01 0.96 AHR30B 1.00 1.01 1.02 AHR36B 1.01 1.00 1.04 AHV30B 1.00 0.97 0.94 AHV36C 1.02 1.05 0.91 MV12B FC/MC35B 1.00 0.99 0.94 MV12B FC/MC43B 1.00 1.00 0.94 MV16C FC/MC35C 1.00 1.04 0.94 MV16C FC/MC43C 1.00 1.00 0.94 MX12BN21 FC/MC35B 1.03 1.10 0.94 MX12BN21 FC/MC43B 1.05 1.13 0.94 MX16CN21 FC/MC35C 1.03 1.09 0.94 MX16CN21 FC/MC43C 1.05 1.11 0.91 Continued on next page. 18 Johnson Controls Unitary Products
Furnaces Coils T.C. S.C KW T*(8,L)V*A12 FC/MC/PC32A 1.00 0.99 1.02 T*(8,L)V*A12 FC/MC/PC37A 1.00 0.99 0.94 T*(8,L)V*B12 FC/MC/PC35B 1.00 0.99 0.94 T*(8,L)V*B12 FC/MC/PC43B 1.00 1.03 0.94 T*(8,L)V*C16 FC/MC/PC35C 1.00 0.99 0.94 T*(8,L)V*C16 FC/MC/PC43C 1.00 1.00 0.94 T*(8,L)V*C20 FC/MC/PC35C 1.00 1.04 0.94 T*(8,L)V*C20 FC/MC/PC43C 1.00 1.00 0.94 T*9(C,V)*B12 FC/MC/PC35B 1.00 0.99 0.98 T*9(C,V)*B12 FC/MC/PC43B 1.00 1.00 0.94 T*9(C,V)*C16 FC/MC/PC35C 1.00 0.99 0.94 T*9(C,V)*C16 FC/MC/PC43C 1.00 1.00 0.94 T*9(C,V)*C20 FC/MC/PC35C 1.00 0.99 0.94 T*9(C,V)*C20 FC/MC/PC43C 1.00 1.00 0.94 TM8X080B12MP11 FC/MC/PC35B 1.02 1.08 0.95 TM8X080B12MP11 FC/MC/PC43B 1.05 1.12 0.95 TM8X080C16MP11 FC/MC/PC35C 1.04 1.11 0.92 TM8X080C16MP11 FC/MC/PC43C 1.04 1.11 0.93 TM8X100C16MP11 FC/MC/PC35C 1.04 1.11 0.92 TM8X100C16MP11 FC/MC/PC43C 1.04 1.11 0.93 TM8X100C20MP11 FC/MC/PC35C 1.03 1.09 0.93 TM8X100C20MP11 FC/MC/PC43C 1.05 1.12 0.93 TM8X120C20MP11 FC/MC/PC35C 1.03 1.09 0.93 TM8X120C20MP11 FC/MC/PC43C 1.05 1.12 0.93 TM9E060B12MP11 FC/MC/PC35B 1.02 1.07 0.96 TM9E060B12MP11 FC/MC/PC43B 1.03 1.10 0.95 TM9E080B12MP11 FC/MC/PC35B 1.02 1.07 0.96 Furnaces Coils T.C. S.C KW TM9E080B12MP11 FC/MC/PC43B 1.03 1.10 0.95 TM9E080C16MP11 FC/MC/PC35C 1.03 1.09 0.93 TM9E080C16MP11 FC/MC/PC43C 1.05 1.12 0.93 TM9E100C16MP11 FC/MC/PC35C 1.03 1.09 0.93 TM9E100C16MP11 FC/MC/PC43C 1.05 1.12 0.93 TM9E100C20MP11 FC/MC/PC35C 1.02 1.08 0.97 TM9E100C20MP11 FC/MC/PC43C 1.03 1.10 0.97 TM9X060B12MP11 FC/MC/PC35B 1.02 1.07 0.96 TM9X060B12MP11 FC/MC/PC43B 1.03 1.10 0.95 TM9X080B12MP11 FC/MC/PC35B 1.02 1.07 0.96 TM9X080B12MP11 FC/MC/PC43B 1.03 1.10 0.95 TM9X080C16MP11 FC/MC/PC35C 1.03 1.09 0.93 TM9X080C16MP11 FC/MC/PC43C 1.05 1.12 0.93 TM9X100C16MP11 FC/MC/PC35C 1.03 1.09 0.93 TM9X100C16MP11 FC/MC/PC43C 1.05 1.12 0.93 TM9X100C20MP11 FC/MC/PC35C 1.02 1.08 0.97 TM9X100C20MP11 FC/MC/PC43C 1.03 1.10 0.97 TMLX080B12MP11 FC/MC/PC35B 1.02 1.08 0.95 TMLX080B12MP11 FC/MC/PC43B 1.05 1.12 0.95 TMLX080C16MP11 FC/MC/PC35C 1.04 1.11 0.92 TMLX080C16MP11 FC/MC/PC43C 1.04 1.11 0.93 TMLX100C16MP11 FC/MC/PC35C 1.04 1.11 0.92 TMLX100C16MP11 FC/MC/PC43C 1.04 1.11 0.93 TMLX100C20MP11 FC/MC/PC35C 1.03 1.09 0.93 TMLX100C20MP11 FC/MC/PC43C 1.05 1.12 0.93 TMLX120C20MP11 FC/MC/PC35C 1.03 1.09 0.93 TMLX120C20MP11 FC/MC/PC43C 1.05 1.12 0.93 Johnson Controls Unitary Products 19