Indoor Lighting 2013
Welcome to Appleton Technologies lighting Here at AT we are concerned with the customer experience realted to using our advance lighting solutions. We strive to ensure that each customer interaction is an engaging and ultimately rewarding experience for all involved. Our production and component sourcing bring together the best technology available, in order to create outstanding products, engineered to operate flawlessly at peak performance, while satisfying the many needs of this dynamic market. Our production facility employs the latest technologies to aid in the design and testing of our industrial and consumer products. At all levels of the design, engineering and production process, our products undergo stringent testing procedures, to key international standards. Production excellence isn't just a desire, it is a requirement, and through this we will bring total customer satisfaction, if not, then our job isn't done. Research and Development Our testing and lighting research laboratories have adopted advanced electronic testing equipment, allowing for detailed analysis of the performance of components and finished lighting equipment. We are able to produce *.IES files which allow for accurate 3D modeling of our lighting equipment, this allows all products to be tested out in virtual reality before purchasing, streamlining the buying decisions while at the same time reducing the risk of capital equipment purchases. Our products use recognised components from major industry players allowing us to ensure that our final products are up to the necessary industry standards. While we strive, safely, to push the abilities of lighting technology in order to satisfy the growing global demand for lighting. CONTENTS Spot Lights 01-02 PAR Lights 03-06 Light Bulbs Tube Lights 07-08 09-10 Down Lights 11-12 Flood Lights 13-14 High Bay Lights 15-16
AT 01 AT 02 Spot Lights Spot Lights Product Features : Pure Aluminum alloy heat sink CREE or Edison Up to 90% energy savings Modular screw based construction: No glue allows for simple driver replacement Triac Dimmer compatible Halogen Retrofit ready 50,000 hrs rated life time 3 yrs warranty 15º 30º 45º 60º angles available CE UL certifications Mr16-6w 360 lm 400 lm 12v Typical illuminance of a 6w Spot Light 6w Warm White MR16 Spot Light Distance Luminance Beam Radius 0.5M 1.0M 1.5M 1300 650 325 2r = 0.45m 2r = 0.9m 2r = 1.35m Gu10-3w 240 lm 400 lm 280 lm 500 lm Mr11-1w 65 lm 85 lm 12v All our spot lights can be safely used inside standard fire rated (part L compliant) down lighters. Mr11-3w 240 lm 280 lm Gu10-9w Mr16-9w 400-lm 500 lm 12v
AT 03 AT 04 PAR Lights Product Features Pure Aluminum alloy heat sink CREE or Edison Up to 90% energy savings Modular screw based construction: No glue allows for simple driver replacement Triac Dimmer compatible Original PAR size retrofit lights 50,000 hrs rated life time 3 yrs warranty 15º 30º 45º 60º angles available CE / UL certifications Typical Illuminance of a 12w PAR38 PAR Lights 12w Cool White PAR38 Distance Luminance Beam Radius PAR30-9w 450 - lm 650 - lm 630 - lm 720 - lm PAR38-12w 780 - lm 1100 - lm PAR30-7w 0.5M 1.0M 1.5M 9000 4500 2250 2r = 0.65m 2r = 1.3m 2r = 1.95m PAR30-14w 750 - lm 950 - lm PAR30-15w 700 - lm 850 - lm 85-260v
PAR38-9w 630 - lm PARLights PAR Lights Typical Illuminance of a 9w PAR20 PAR20-9w PAR20-9w Cool White Distance Luminance Beam Radius 0.5M 2600 2r = 0.45m 1.0M 1300 2r = 0.9m 1.5M 650 400 - lm 500 - lm 720 - lm 2r = 1.35m PAR38-24w PAR20-6w 1200 - lm 360 - lm 1600 - lm 450 - lm PAR20-5w PAR38-27w 350 - lm 470 - lm 1100 - lm 1500 - lm AT 05 AT06
AT 07 AT08 Bulbs Bulbs Product Features Pure Aluminum alloy heat sink Proprietary design for high lumen output Up to 80% energy savings Triac Dimmer compatible Direct replacements for traditional bulb shapes Available 1w - 9w 50,000 hrs rated life time 3 yrs warranty Up to 360º+ viewing angle CE certification C35-6w G60-4w G60-8w 360 - lm 400 - lm 110/220/240v 360 - lm 400 - lm 110/220/240v 580 - lm 600 - lm 110/220/240v C35-3w 225 - lm 250 - lm 110/220/240v G60-5w 320 - lm 470 - lm 85-260v
Tube & Panel Lights Tube & Panel Lights Product Features Pure Aluminum alloy tube shell Clear or diffused PC cover High lumen output SMD s 101lm/w system output Up to 66% energy savings Direct replacements for T8 and T5 tubes 50,000 hrs rated life time 3w up to 33w 3 yrs warranty 140º viewing angle CE / ETL /UL certification Panels 15w ~ 70w Ultra thin 10mm 80 lm per watt used 300mm x 300mm 600mm x 600mm 1200mm x 600mm T5 Tube 3w ~ 33w 1ft ~ 5ft length 300 - lm ~ 3400 - lm 400 - lm ~ 3600 - lm 85-300v Special Features T8 tube 5w ~ 33w 1ft ~ 8ft Length 450 - lm ~ 3400 - lm 500 - lm ~ 3600 - lm 85-300v AT09 AT 10
otlights. Down Lights Down Lights Product Specifications Pure Aluminum alloy heat sink CREE or Edison Up to 80% energy savings Fully retrofit compatible 50,000 hrs rated life time 3 yrs warranty 15º 30º 45º 60º angles available CE certifications Available in varieties 1w - 40w 9w fitting 500 - lm 400 - lm 40w fitting 3000 - lm 3500 - lm 3w fitting 180 - lm 210 - lm 12w fitting 1100 - lm 780 - lm 8w fitting 720 - lm 520 - lm ***All Down lighters available in either design *** AT AT 11 12
Flood Lights Flood Lights Product Features Solid State Lighting Technology Single module light engine High energy savings Pure light colour IP65 - Environmental protection grade No lead, mercury or other contaminating chemicals High CRI Extremely long life 50,000hrs 10w - Flood Light Reflector available as 28º / 50º or 110º 30w - Flood Light 740 - lm 700 - lm 85-277v Available from 10w up to 200w CE certified Can be 2220 - lm Ex de IICT6 & Ex dii Bt5 explosion proofed 50w - PIR SENSOR Flood Light 2100 - lm Vandal Proof Caged light 85-277v 3700 - lm 3500 - lm 85-277v 100w - Flood Light 150w - Flood Light 10500 - lm 11100 - lm 85-277v AT 13 80w 120w Flood Light 7400 - lm 8400 - lm 7000 - lm 8880 - lm 85-277v 85-277v AT 14
Product Features High Bays Solid State Lighting Technology Single module light engine High energy savings Pure light colour IP65 - Environmental protection grade No lead, mercury or other contaminating chemicals High CRI Extremely long life Reflector available as 45º / 90º or 120º Available from 20w up to 200w CE certified / UL listed Key Facts 85-300v Input voltage Tested not calculated Lumen output: Up to 100lm/w tested not calculated lumen All IES files are available on request 200w Highbay 18000 - lm 20000 - lm 45º Reflector High Bays 20w Highbay 1400 - lm 1480 - lm 120w Highbay 8400 - lm 8880 - lm AT 120º Reflector AT 15 16
Appleton Technologies Ltd Unit 602, Causeway Bay Comm BLDG 1Sugar Street, Causeway Bay, Hong Kong. Hong Kong:+852 8198 0627 United Kingdom: +44 161 408 3522 China: +86 18688 936 914 www.appleton-tech.com David@appleton-tech.com Copyright Appleton Technologies 2012 - Information given here is subject to change without notice
Product Features Uses a single powerful (20W 100W) as the light source, using our proprietary encapsulation technology. Utilizes the special design of a multi-chip High power module. High heat conductivity, low luminous decay, pure light colour and no ghosting. Integrative heat sink and housing design for greater thermal efficiency. The is closely connected to the surface. The heat from the is removed through the heat dissipation wing and also by air ventilation. This ensures 50,000 hours life-span for the, if it works for 11-12 hours per day. The light engine is housed in high quality aluminum alloy housing. Its structure is compact and beautiful, It can achieves a protection level of IP65, ensuring there is no chance of dust or moisture damage to the lighting system. Great power-saving efficiency, when compared with HPS lighting, savings can be greater than 60%. Environment friendly, no lead, mercury or other contaminates. Can represent colours faithfully and offers a variety of colour temperature to suit the needs of the situation. The light delivers a light colour which is more suitable for lighting a public environment, rather than soft orange glow of a HPS, or the harsh blue of a metal Halide light. This industrial light is controlled by a constant current multiple voltage (85-265VAC) driver with built in voltage regulation protecting against dangerous spikes. Due to the nature of lighting glare is greatly reduced, thus eliminating fatigue of the eyes, while lifting the atmosphere of the working environment. Does not substantial add to the workload of the building environmental systems. Product Features : Classically designed to sit flush into the ceiling, these down lights will deliver up to 90% energy savings. Wrapped up in a thermally considered design for maximum life. 0 The casing is able to pivot by 90 They use 1W high-power, high efficiency modules for the light source. Products comply with CE, ROHS and UL certifications requirements; Good heat dissipation, under prolonged use, the temperature does not rise higher than 50 degrees Celsius; DIMMABLE