Seating
289 Executive chairs 290 Ergonomic chairs 304 Operar chairs 320 Specialist chairs 327 Meeting and visir chairs 330 Training and conference chairs 334
290 ExecutiveChairs / Ergonomics and buying guide Ergonomics and buying guide Mechanisms: Synchro > The synchronisation of the seat and backrest provide continued support the user in accordance with his bodyweight. > The mechanism is adjustable in tension and the backrest has a multi-position back lock (varies according seat model). > All our seats are fitted with a backrest reverse lock safety mechanism. > Ergonomics: Forward axis tilt mechanism > Seat tilts around a horizontal axis. The mechanism is located wards the front of the seat, enabling the user keep his or her feet in constant contact with the floor. > The mechanism is adjustable in tension and can be locked in determined user positions. > Ergonomics: Central axis tilt mechanism > Seat tilts around a horizontal axis located centrally beneath the seat. > Tension can be adjusted and locked in the forward position. > Ergonomics: EN 1335 1/2/3 EN 1728 EN 16139 EN 1022 EN 13761 EN 1021 1/2 Standards and certifications: EN1335: Office task chair standards > Part 1 : Dimensions > Part 2 : Safety requirements > Part 3 : Safety tests EN1728/EN16139/EN1022/EN13761: Office chair and collective seating standards > Safety, strength, durability and dimensions. EN1021 : Standard on fire resistance ratings for materials and coatings > Part 1 : Cigarette > Part 2 : Matches s: 2 3 5 7 > The seat mechanism and structure are guaranteed for use by one person under normal conditions. s do not cover: excessive or inappropriate use, environmental conditions (sunlight, humidity, wear and tear of fabrics, etc ) and the natural wear of materials. > Standard 2 year guarantee on parts subject wear (casrs, gaslifts, arms, fabrics etc..), extended guarantee available on certain fabric upholstery (see prices p 346-347). Years Years Years Years Leather and upholstery: FULL GRAIN LEATHER CORRECTED- GRAIN LEATHER CRUST LEATHER The selection of colours available is a reflection of the current trends. The choice of colours and upholstery varies depending on the seat ranges. A variety of fabrics and leathers are available from sck. There are three types of leather: > «Full-grain» leather refers a type of leather that has not been sanded. The leather s natural grain is preserved along with all its natural characteristics. > «Corrected-grain» refers a type of leather from which the tanner has corrected or sanded off imperfections. An artificial grain is then applied its surface. > Crust leather refers the underside of the hide, and is obtained by separating the layer of p-grain from the rest of the hide.
ExecutiveChairs / Executive chair specifications 291 Specifications - Executive chairs Models Style p.292 Berline p.293 Elysée p.294 Profil p.295 Futur p.296 High back Fabric Corrected and full-grain leather Forward axis tilt mechanism Synchro mechanism Aluminium base Polished aluminium base (chrome finish) Fixed arms Adjustable armrests Ergonomics 3 3 3 5 5 Models Manhattan p.297 Elegance p.298 Reflex p.299 Trek p.300 Harly p.301 Classic p.302 Low back High back Fabric Crust leather Corrected and full-grain leather Central axis tilt mechanism Forward axis tilt mechanism Synchro mechanism Nylon base Aluminium/black aluminium base Chrome/polished aluminium base Wooden base Fixed arms Adjustable armrests Ergonomics 5 3 5 5 2 3 Models Staff p.303 Prestige p.303 Select p.303 Nomina p.303 Low back High back Simulated leather Chrome base Wooden arms and/or base Wooden armrests Stackable 2 2 7 3
292 ExecutiveChairs / Style Style > Forward axis tilt mechanism, adjustable in tension by means of a pull-out lever at the side, lockable in 5 positions > Backrest reverse lock safety mechanism > See through designer casrs > Polished aluminium base with chrome finish (executive) and chrome finish tubular steel base (visir) > Dimensions: Executive: backrest: H. 64 x W. 43 cm and seat: X. 46 x D. 44 x H. 47/57 cm. Visir: backrest: H. 40 x W. 43 cm and seat: W. 46 x D. 44 x H. 48 cm. Overall W.: 69 cm. / standards 3 Years 9001 14001 5 choices of leather colour (+ leather) YBQW YHQY YDQX YFQW YUQW / black White/ white Brown/ brown CORRECTED- GRAIN LEATHER Red/ black* Graphite grey/ black* On request *Front of chair in red or graphite grey and back of chair in black Choice of 4 colours of leather available on request (4 6 weeks) Model without armrest trim Model with assorted leather armrest trim Coloured leather: + 55 premium on standard pricing of black leather YB QW Executive chair with arms 5 101 011 + leather + SQ 1794 Cantilever-base visir chair without arms 5 101 015 + leather + SQ 1046 Cantilever-base visir chair with arms (available on request, allow 4 6 weeks) 5 101 016 + leather + SQ 1360 (available on request, allow 4 6 weeks) Executive chair with arms 5 101 010 + leather + SQ 1870 Cantilever-base visir chair with arms 5 101 014 + leather + SQ 1403
ExecutiveChairs / Berline 293 Berline Choice of 8 colours of leather available on request (4 6 weeks) Synchro executive chair Coloured leather: + 55 premium on standard pricing of black leather YB > Wide-angle synchro mechanism, lockable in 5 positions > Backrest reverse lock safety mechanism > Polished aluminium base with chrome finish (executive and conference) and chrome finish tubular steel base (visir) > Dimensions: Executive: backrest: H. 95 x W. 57 cm and seat: W. 49 x D. 46 x H. 46/55 cm. Conference: backrest: H. 79 x W. 57 cm and seat: W. 49 x D. 45 x H. 47 cm. Overall W.: 71 cm. Visir: backrest: H. 31 x W. 44 cm and seat: W. 43 x D. 41 x H. 45 cm. Overall W.: 58 cm. / standards 3 Years 9001 14001 CORRECTED- GRAIN LEATHER 9 choices of leather colour (+ leather) 5 097 002 + leather + SQ 1279 Fixed point aumatic return conference chair (available on request, allow 4 6 weeks) YB YH White On request Ivory YC YQ Taupe Red YF 5 097 001 + leather + SQ 1190 Cantilever-base visir chair 5 097 004 + leather + SQ 956 YV Cognac On request YD Brown YE Chocolate YU Graphite grey
294 ExecutiveChairs / Elysée Elysée > Forward axis tilt mechanism, lockable in 5 positions > Backrest reverse lock safety mechanism > Aluminium base (executive) and steel base with aluminium finish epoxy coating (visir) > Leather/wood combinations available from sck : other combinations available on request (contact us for details) > Dimensions: Executive: backrest: H. 77 x W. 42 cm and seat: W. 50 x D. 48 x H. 48/58. Conference: backrest: H. 60 x W. 42 cm and seat: W. 50 x D. 48 x H. 44. Overall width: 63 cm. Visir: backrest: H. 61 x W. 45 cm and seat: W. 48 x D. 48 x H. 48 cm. Overall width : 55 cm. 4 choices of leather/ wood combinations on request (4 6 weeks) Other finishes available on request: + 55 premium on standard pricing of finishes available from sck / standards 3 9001 14001 CORRECTED- GRAIN LEATHER (KIPSKIN) 8 choices of leather/wood combinations (+ fin.) Forward axis tilt chair Finish available from sck 5 359 002 + fin. 961 Fixed point aumatic return conference chair YCSBXK Ivory/ walnut YBSBXK / walnut YBSBXM / cherry YBSBXJ / wenge Finish available from sck 5 359 007 + fin. 914 Cantilever-base visir chair Finish available from sck 5 359 008 + fin. 361 YESBXF Chocolate/ light oak On request YBSBXF / light oak YCSBXJ Ivory/ wenge YESBXJ Chocolate/ wenge
ExecutiveChairs / Profil 295 Profil > Synchro mechanism, lockable in 5 positions > Backrest reverse lock safety mechanism > Corrected-grain leather or fabric covering available for the synchro chair with high back and headrest > Aluminium base (executive) and steel base with aluminium epoxy finish (visir) > Dimensions: Executive leather/fabric: backrest: H.68 (+ 20 cm headrest) x W. 50 cm and seat: W. 50 x D. 44 x H. 43/53 cm Conference: backrest: H. 70 x W. 47 cm and seat: W. 48 x D. 46 x H. 41/50 cm. Overall width: 61.5 cm. Visir: backrest: H. 61 x W. 50 cm and seat: W. 51 x D. 45 x H. 48 cm. Overall width: 60 cm. / standards 5 9001 1 colour of leather available 14001 Complies with EN 1335 1/2/3 1 colour of cat. A fabric avail. (+ fab. A) CORRECTED- GRAIN LEATHER (KIPSKIN) 28 fabrics available on request (4 6 weeks) Shades and codes: see pages 346-347. leather models High back synchro chair with headrest With adjustable armrests 5 344 030 YB SB 769 With fixed arms 5 344 029 YB SB 723 High back synchro chair With adjustable armrests 5 344 026 YB SB 701 Leather high back conference chair on glides, with fixed point aumatic return mechanism 5 344 023 YB SB 616 Cantilever-base visir chair 5 344 022 YB SB 557 Fabric upholstered models Category B fabrics: + 17 premium on standard cat. A fabrics. Category C fabrics: not available YB FA High back synchro chair with headrest With adjustable armrests 5 344 030 + fab. A + SB 587 With fixed arms 5 344 029 + fab. A + SB 565
296 ExecutiveChairs / Futur Futur > Synchro mechanism, lockable in 5 positions, backrest reverse lock safety mechanism, integrated seat depth adjustment (through 60 mm) > Adjustable headrest height (through 50 mm) > Height-adjustable polyurethane arms on the executive chairs, and solid aluminium fixed arms with leather trim sleeves on the visir models > Two-ne base in polished aluminium and black aluminium (executive) and chrome finish tubular steel structure (visir) > Dimensions: Executive: backrest: H. 58 x W. 49 cm and seat W. 49 x D. 48 x H. 43/55 cm - Visir: backrest H. 52 x W. 49 cm and seat W. 49 x D. 48 x H. 45 cm. / standards 5 9001 14001 Complies with EN 1335 1/2/3 FULL GRAIN LEATHER 4 choices of leather colour available on request (allow 4 6 weeks for delivery) Coloured leather: + 55 premium on the standard pricing of black leather YB 5 choices of leather colour (+ leather) Synchro Executive chair YB YC YS YG Ivory Almond green On request Havana Red YF leather 5 035 003 + leather + SQ 616 Cantilever-base visir chair leather 5 035 004 + leather + SQ 407
ExecutiveChairs / Manhattan 297 Manhattan > Forward axis tilt mechanism > Adjustable in tension and lockable in 5 positions > Backrest reverse lock safety mechanism > Fixed arms with black polyurethane armrests > Polished aluminium base (executive) and chrome finish tubular steel base (visir) > Dimensions: Executive: backrest: H. 79 x W. 42 cm and seat W. 49 x D. 43 x H. 44/53 cm. Visir: backrest H. 65 x W. 51 cm and seat W. 51 x D. 48 x H. 50 cm. 4 choices of leather colour available on request (allow 4 6 weeks for delivery) FULL Coloured leather: + 55 premium on the standard pricing of black leather YB / standards Complies with 5 EN 1335 9001 14001 1/2/3 Complies with EN 16139 Complies with EN 10122 GRAIN LEATHER Executive Visir Visir Executive chair 5 choices of leather colour (+ leather) leather 5 090 001 + leather + SQ 557 Cantilever-base visir chair leather 5 090 003 + leather + SQ 383 YB YC YS YG Ivory On request Almond green Havana YF Red
298 ExecutiveChairs / Elegance Elegance High back executive chair model 5 313 016 YB SW 531 Wood model 5 313 017 YB + fin. 663 Low back executive chair (available on request, allow 4 6 weeks) model 5 313 015 YB SW 476 Wood model 5 313 018 YB + fin. 595 Visir chair model 5 313 014 YB SG 400 Wood model 5 313 014 YB + fin. 553 > Executive chair - wood model: - Forward axis tilt mechanism, lockable in 5 positions, adjustable in tension - Stained solid wood base - Fixed arms in beech plywood, stained match the base > Executive chair - black model: - Central axis tilt mechanism, lockable in the forward position, adjustable in tension - Aluminium base with black epoxy finish - Fixed armrests in beech plywood, upholstered with black leather > Visir: - Cantilever base in tubular steel with black epoxy finish, or in stained solid wood > Dimensions: Executive: backrest: H. 49 or 72 x W. 55 cm and seat: W. 55 x D. 47 or 43 x H. 44/53 cm. Visir: backrest H. 45 x W. 55 cm and seat: W. 55 x D. 43 x H. 46 cm. Overall W.: 66 (wood) and 64 (black) cm. / standards CORRECTED- GRAIN 3 LEATHER (KIPSKIN) 9001 14001 1 leather colour available 2 choices of wood finish (+ fin.) YB XM XN Cherry Mahogany
ExecutiveChairs / Reflex 299 Reflex > Synchro mechanism, adjustable in tension by means of a pull-out lever at the side, backrest reverse lock safety mechanism, lockable in 5 positions > Back height adjustable (through 70 mm) > Height and width-adjustable 2D arms > Polished aluminium base in chrome finish (executive) and 4-leg tubular structure in chrome finish (visir) > Optional chrome casrs available, see p. 309. > Dimensions: Executive: backrest: H. 77 x 45 cm and seat: W. 45 x D. 43 x H. 43/53 cm. Visir: backrest H. 52 x 45 cm / seat W. 47 x D. 44 x H. 47 cm Overall W.: 55 cm 4 choices of leather colour on request (allow 3 4 weeks for delivery) Coloured leather: + 55 premium on the standard pricing of black leather YB / standards 5 CORRECTED- GRAIN LEATHER (KIPSKIN) 5 choices of leather colour (+ leather) YB YC YQ YR YP Ivory Taupe Chestnut Plum Synchro Executive chair leather 5 888 015 + leather + SQ 540 Visir chair On request leather 5 888 002 + leather + SQ 463
300 ExecutiveChairs / Trek Trek 4 choices of leather colour available on request (4 6 weeks) Coloured leather: + 30 premium on the standard pricing of black leather YB Executive chair: > Synchro mechanism, adjustable in tension, lockable in 5 positions, backrest reverse lock safety mechanism > Height-adjustable black polyurethane 3D arms, armrest is adjustable in depth and width >Full grain leather covering on the front of the chair and fire-resistant certified simulated leather on the back > Polished aluminium base (executive) and chrome finish tubular cantilever base (visir) > Dimensions: Executive: backrest: H. 78 x W. 49 cm and seat W. 50 x D. 49 x H. 43/52 cm Visir: backrest H. 62 x W. 49 cm and seat W. 50 x D. 49 x H. 48 cm. Overall W. 63 x D. 65 cm / standards 5 Years 9001 14001 Complies with EN 1335 1/2/3 Complies with EN 1021 1/2 FULL GRAIN LEATHER Synchro Executive chair 5 choices of leather colour (+ leather) leather 5 036 003 + leather + SQ 489 Cantilever-base visir chair leather 5 036 004 + leather + SQ 400 YB YC YS YG Ivory On request Almond green Havana Red YF
ExecutiveChairs / Harly 301 Harly > Forward axis tilt mechanism, adjustable in tension, backrest reverse lock safety mechanism > crust leather covering or taupe coloured «suede-look» fabric upholstery > Polished aluminium base (executive) and chrome finish tubular cantilever base (visir) > Polished aluminium arms fitted with polyurethane armrests > Dimensions: Executive: backrest: H. 81 x W. 51 and seat W. 51 x D. 46 x H. 47/56 cm Visir: H. 74 x W. 50 and seat W. 52 x D. 52 x H. 43 cm. Overall W. 61 x D. 65 cm CRUST LEATHER Executive chair with forward axis tilt mechanism 1 fabric colour IT Taupe 1 leather colour YB Fabric 5 037 002 IT SQ 298 Crust leather 5 037 002 YB SQ 306 Cantilever-base Fabric 5 037 003 IT SQ 255 Crust leather 5 037 003 YB SQ 264
302 ExecutiveChairs / Classic Classic > Central axis tilt mechanism, adjustable in tension > Base in a choice of black nylon or chrome finish (executive) or tubular steel cantilever base in a black epoxy finish (visir) > polypropylene arms > Flat-packed > Dimensions: Executive: backrest: H. 68 x W. 52 cm and seat W. 53 x D. 49 x H. 42/50 cm. Visir: backrest H. 55 x 52 cm and seat W. 53 x D. 49 x H. 47 cm. / standards Executive chair with central axis tilt mechanism 3 CRUST LEATHER Nylon base 5 426 005 YB SV 230 Base in chrome finish 5 426 005 YB SQ 247 Cantilever-base visir chair Steel base in black finish 5 426 007 YB SG 221 1 leather colour YB
2 choices of simulated leather colour ExecutiveChairs / Classic Select 303 / standards 7 9001 14001 4 Complies with EN 13761 YI Ivory YA 3 choices of wood finish for armrest pads (+ fin.) WT Wi WU Cherry Brazilian etimoe Sold exclusively in pairs of the same colour. > Steel base in chrome finish > simulated leather covering with wooden armrest pads, from sck. Ivory colour simulated leather covering with wooden armrests in a Brazilian etimoe finish, on request. > Arms H. 65 cm > Dimensions: backrest: H. 46 x W. 46 cm / seat W. 48 x D. 45 x H. 47 cm. overall : H. 93 x W. 60.5 cm. Set of 2 5 455 015 YA SQ + fin. 276 Unit price 138 On request 5 455 015 YI SQ WI 276 Unit price 138 Nomina 1 simulated leather colour Sold exclusively in pairs of the same colour. > Steel base in a chrome finish fitted with 4 non-slip glides, 2 of which are designed prevent the chair from tipping over > simulated leather covering on seat, backrest and armrest pads > Arms H. 61 cm > Dimensions: backrest H. 46 x W. 50 cm / seat W. 51 x D. 45 x H. 47 cm. overall: H. 93 x W. 56.5 cm. / standards 3 9001 14001 Complies with EN 13761 YA Set of 2 5 291 003 YA SQ 238 Unit price 119 1 simulated leather colour (certified fire-resistant) YA Staff > 4-leg base in laminated beech plywood > Simulated leather covering (certified fire-resistant) > Protective plastic glides > Arms H. 65 cm > Dimensions: backrest: H. 28 x W. 48 cm / seat W. 43 x D. 42 x H. 48 cm. overall: H. 82 x W. 50 (staff chair) and 57 (armchair) cm. 2 choices of wood finish (+ fin.) Staff chair / standards 9001 14001 2 XM XN Cherry Mahogany 1 simulated leather colour (certified fire-resistant) YA 5 321 001 YA + fin. 217 Armchair 5 321 002 YA + fin. 230 Prestige > 4-leg base in laminated beech plywood > Simulated leather covering (certified fire-resistant) > Protective plastic glides > Arms H. 66 cm > Dimensions: backrest H. 46 x W. 50 cm / seat W. 50 x D. 44 x H. 47 cm overall: H. 86 x W. 52 (staff chair) et 59 (armchair) cm. 2 choices of wood finish (+ fin.) Staff chair / standards 9001 14001 *for use up 110 kg in weight 2 Complies with EN 1022-98 Complies with EN* 1728:2000 XM Cherry XN Mahogany 5 319 001 YA + fin. 310 Armchair 5 319 002 YA + fin. 327
304 ErgonomicSeats / Ergonomics and buying guide Ergonomics and buying guide Sitting posture : The choice of a good seat and a healthy sitting posture are crucial in preventing backache and avoiding MSDs (Musculoskeletal Disorders). It is therefore important have a seat that can adapt a user s size and body shape and can be adjusted for maximum comfort. How sit correctly > Adopt a healthy sitting position and use a seat that ensures appropriate support for the body. > Lean backwards regularly in order minimise pressure on your intervertebral discs. > Choose a chair with an adjustable seat. By synchronising seat and backrest movement, the angle of the sitting position can be increased from 90 110, thereby reducing pressure on the vertebral column. > Use a seat that features adjustment levers that are intuitive use and accessible from a sitting position. Adjustment controls must be logical and easy manage. Recommendations 1 Eye/screen distance 50 70 cm 2 Relaxed shoulders 3 Forearms in horizontal position with elbows bent at an angle slightly in excess of 90 4 Distance between knees and desk : 8 10 cm 5 Avoid pressure the area behind the knees 6 Legs at a 90 angle 7 Feet resting flat on the ground (use a footrest with a 0 15 pitch if necessary) 8 Lock the back against the backrest 9 Adjust the height of the backrest provide optimal support for the pelvic and lumbar region. 10 Occupy the entire surface of the seat 2 8 9 10 3 1 4 5 6 7 Mechanisms: Self-regulating > The mechanism aumatically adjusts tension according the weight of the user. > Optimal synchronisation of the seat/backrest positions for different users. > Backrest with end-of-run damping mechanism. > Ergonomics: Synchro > The synchronisation of the seat and backrest provide continued support a user in accordance with his weight. > The mechanism is adjustable in tension and the backrest can be locked in a range of predetermined positions (varies according seat model). > All our seats are fitted with a backrest reverse lock safety mechanism. > Ergonomics: Forward axis tilt mechanism > Seat tilts backwards around a horizontal axis located wards the front of the seat, enabling the user keep his or her feet in constant contact with the floor. > The mechanism is adjustable in tension and can be locked in multiple positions. > Ergonomics: Central axis tilt mechanism > Seat tilts backwards around a horizontal axis located centrally beneath the seat. > The mechanism is adjustable in tension and can be locked in a forward position. > Ergonomics: Permanent contact mechanism > The backrest stays in permanent contact with the user s back without affecting the seat position. > The mechanism may or may not be adjustable in tension. Textile fabrics, leather and upholstery: The selection of available colours follows current trends; the choice of colours and fabrics varies depending on the seat ranges and can be chosen co-ordinate with deskp screens and screens. Fabrics available from sck include polypropylene: category A, category B M1 fire-resistant polyester, fabrics specific certain models (antibacterial, 24h, etc.), leather, simulated leather > 62 fabric colours available on request divided in 3 categories: A, B or C depending on the material: polypropylene, polyester, wool, PVC coating... For characteristics, reference codes and available colours see p. 346-347. > Price guides and feasibility for each product category can be found under the relevant office chairs product range. In certain ranges it is possible opt for specific fabrics or coloured leathers. Details can be found under the relevant product section. 39 fabrics available on request (allow 4 6 weeks for delivery) Shades and codes : see pages 346-347. Cat. B fabrics: + xx premium on the category A fabrics pricing Tissus C : + xx premium on the category A fabrics pricing Adjustments: Backrest height adjustment > Allows a user adjust the position of the backrest provide optimal lumbar support. Seat depth adjustment > Allows a user adjust the position of the seat, in accordance with his size, along a front back axis and optimise the contact area between the seat and his thighs. Lumbar support adjustment > > Allows a user adjust the height and/or depth of lumbar region support on fixed backrests. Options Casrs for hard floors Our seats are fitted with soft-floor casrs (unless stated otherwise). Soft rubber casrs are available for use on hard floors (eg. parquet, tiled floors, linoleum, flagsnes). Armrests By providing forearm support the armrests allow a user adopt the best possible working position. Different fixed and adjustable designs are available (adjustable in height, width, depth, rotation). Details vary according the model. Standards and certifications: EN1335 : Office chair standard. > Part 1 : Dimensions > Part 2 : Safety requirements > Part 3 : Safety tests s: Complies with EN 1335 1/2/3 > The chair mechanism and structure are guaranteed for use by one person under normal conditions.. The product guarantee does not cover excessive or inappropriate use, the effects of environmental conditions (sunlight, humidity, wear and tear of fabrics, etc ) and the natural wear of materials. > Standard 2 year guarantee applies working components (casrs, pisns, arms, fabrics etc..), extended guarantees available on certain fabrics (see prices p 346-347). X
ErgonomicChairs / Chair specifications 305 Chair specifications Ergonomic chairs Models Dynamics p.306 Reflex p.307 Reflex p.308-309 Team p.310-311 Touch p.312-313 Cosmo p.314-317 Fabric backrest Mesh backrest Leather backrest Polypropylene backrest Height-adjustable backrest Lumbar support Headrest Central axis tilt mechanism Synchro mechanism Self-regulating mechanism Depth-adjustable seat Adjustable seat tilt nylon base White nylon base Aluminium base Polished aluminium base Fixed arms 2D adjustable arms 3D adjustable arms 4D adjustable arms Ergonomics 5 5 5 3 5 5 Ergonomic and operar chairs Models Win p.318-319 Opus p.320-321 Net@work p.322-323 Scoop p.324-325 Globe p.326 Fabric backrest Mesh backrest Polypropylene backrest Height-adjustable backrest Lumbar support Headrest Permanent contact Central axis tilt mechanism Synchro mechanism Self-regulating mechanism Depth-adjustable seat nylon base Aluminium base Polished aluminium base Fixed arms Arms adjustable in height and width 2D adjustable arms 3D adjustable arms 4D adjustable arms Ergonomics 5 5 5 3 3 Standard on at least one model in the range Optional
306 ErgonomicChairs / Dynamics Fabric upholstered chair with synchro mechanism and 3D armrests Leather chair with headrest and 3D armrests Dynamics 28 fabrics available on request (allow 4 6 weeks for delivery) Shades and codes : see pages 346-347. Leather models Synchro chair with headrest and 3D armrests 5 659 008 + leather + SB 871 Cantilever-base visir chair Sold exclusively in pairs of the same colour. 5 659 014 + leather + SB 527 Unit price (black leather) 263.50 Fabric models Synchro chair with headrest and 3D armrests 5 659 008 + fab. A + SB 697 Synchro chair with 3D armrests 5 659 006 + fab. A + SB 638 Cantilever-base visir chair Sold exclusively in pairs of the same colour. 5 659 013 + fab. A + SB 459 Unit price (cat. A fabric) 229.50 Category B fabrics: + 21 premium on the standard pricing of cat. A fabrics Category C fabrics: not available Coloured leather: + 55 premium on the standard pricing of cat. A fabrics > Synchro mechanism, adjustable in tension by means of a lever at the side, lockable in 11 positions. Seat depth is adjustable (through 50 mm) and tilt can be adjusted at angles between 0 and 4. > Backrest features a reverse lock safety mechanism and adjustable lumbar support (through 50 mm) > 3D adjustable armrests (height, width, depth) > > Tilt-adjustable headrest Dimensions: Backrest: H. 54 x W. 45 cm. Headrest: H. 19 cm. Seat: W. 45 x D. 46 x H. 46/58 cm. / standards 5 1 cat. A fabric colour (+ fab. A) FA 9001 YB 14001 3 choices of leather colour (+ leather) Ivory YC On request CORRECTED- GRAIN LEATHER (KIPSKIN) YE Chocolate 1 base finish SB Aluminium grey
ErgonomicChairs / Reflex 307 Chair with black polypropylene back and 4D armrests Chair with white polypropylene back and 2D arms Reflex > Synchro mechanism adjustable in tension by means of a lever at the side. Seat depth is adjustable (through 60 mm). > Polypropylene back made from innovative materials. Features a reverse lock safety mechanism, lockable in 5 positions and adjustable in height (through 70 mm). > Adjustable arms: 2D (height and width) or 4D (height, width, depth and rotation). > Chair supplied fully assembled > Alternative configurations available on request, contact us for further details. > Dimensions: Backrest: H. 58 x W. 47 cm. Seat: W. 45 x D. 43 x H. 43/55 cm / standards 5 2 choices of cat. B fabric colour (+ fab. B) DU DO SF SQ SV Plum 3 choices of finish for base White nylon Polished aluminium nylon optional chrome finish casrs, see p. 309 Choice of 37 fabrics available on request (cat. A and B fabrics: 4 weeks - cat. C fabrics: 6 weeks) Shades and codes: see pages 346-347. Category A fabrics: - 17 on the pricing of cat. B fabrics Category C fabrics: + 21 premium on the pricing of cat. B fabrics Models with white polypropylene backrest Synchro chair, black 4D armrests, polished alum. base, cat. B fabric 5 649 027 + fab. B + SQ 544 Synchro chair, white 2D arms, white nylon base, cat. B fabric 5 649 023 + fab. B + SF 485 Synchro chair, white nylon base, cat. B fabric 5 649 029 + fab. B + SF 412 Visir chair, 4 legs and casing in white finish, cat. B fabric 5 649 045 + fab. B + SP PD 106 Models with black polypropylene backrest Synchro chair, black 4D armrests, polished alum. base, cat. B fabric 5 649 035 + fab. B + SQ 531 Synchro chair, black 2D arms, black nylon base, cat. B fabric 5 649 033 + fab. B + SV 463 Synchro chair, black base, cat. B fabric 5 649 037 + fab. B + SV 400 Visir chair, 4 legs and casing in black finish, cat. B fabric 5 649 046 + fab B + SG PA 98
308 ErgonomicChairs / Reflex High back synchro chair with mesh back and optional 4D armrests High back synchro chair with fabric backrest and headrest. Optional 2D arms Optional chrome casrs Reflex > High back models with upholstered back and headrest or mesh back feature a synchro mechanism adjustable in tension by means of a lever at the side. High back upholstered model adjusts by hand wheel. > Mechanism is lockable in 5 positions with backrest reverse lock safety system > Back height adjustable (through 70 mm) > Seat depth adjustable (through 50 mm) Dimensions: Fabric back: H. 57 (with headrest + 20 cm) x W. 45 cm. Mesh back: H. 58 x W. 45 cm. Seat : W. 45 x D. 43 x H. 43/56 cm
309 High back synchro chair with fabric back. Optional width-adjustable arms High back synchro chair with mesh back and optional 4D armrests Stackable visir chair with upholstered back 2 choices of cat. A fabric colour (+ fab. A) / standards BLACK BASE VERSION, CAT. A FABRICS FROM STOCK FB FA Dark blue Celestial black 3 choices of fire-resistant B fabric colours UR DU DO Nougat Plum 1 mesh colour 5 High back synchro chair with fabric back and headrest Fitted with soft floor casrs 5 888 012 + fab. A + SV 366 Fitted with hard floor casrs 5 888 016 + fab. A + SV 374 IY 3 choices of finish for base High back synchro chair with mesh back Fitted with soft floor casrs 5 888 013 + fab. A + SV 327 Fitted with hard floor casrs 5 888 017 + fab. A + SV 336 SF White nylon Options SQ SV Polished aluminium nylon premium cat. A fabrics avail. on request - allow 4 weeks (+ fab. A) + 0* cat. B fabrics avail. on request - allow 4 weeks (+ fab. B) + 17* cat. C fabrics avail. on request - allow 6 weeks (+ fab. C) + 38* Shades and codes see pages 346-347 *compared cat. A fabrics (+ fab. A) white nylon base for seat avail. from sck (+ SF) + 10** polished aluminium base avail. from sck (+ SQ) + 34** **compared black base version (+ SV/SG) Accessories available from sck set of 5 chrome casrs ø 65 mm for hard floors* 5 888 019 33 set of 4D armrests (adjustable in height, width, depth and rotation) in chrome finish* 5 888 011 SQ 98 set of adjustable 2D arms (height and width) in chrome finish* 5 649 008 SQ 68 set of adjustable 2D arms (height and width) in black finish* 5 649 010 60 width-adjustable arms in chrome finish* 5 649 007 SQ 47 set of width-adjustable arms in black finish* 5 649 009 38 *for work chairs High back synchro chair with mesh back Fitted with soft floor casrs 5 888 014 + fab. A + SV IY 366 Fitted with hard floor casrs 5 888 018 + fab. A + SV IY 374 Cantilever-base visir chair with fabric back > FA fabric colour available from sck > Not available with white base 5 888 010 + fab. A + SG 191
310 ErgonomicChairs / Team Team Progress Synchro mechanism, adjustable seat, high fabric backrest and lumbar support. Optional HA arms. Team Team Progress Air Synchro mechanism, adjustable seat, high mesh backrest, lumbar support. Optional 4D armrests Fabric back model (Team Progress and Team Synchro) > Synchro mechanism, adjustable in tension by means of a lever at the side (Team Progress) or centrally positioned hand wheel (Team Synchro), lockable in 5 positions, backrest reverse lock safety mechanism > Height-adjustable lumbar support (through 75 mm) > Seat depth adjustable through 55 mm (Team Progress) Mesh back model (Team Progress Air and Team Synchro Air) > Synchro mechanism, adjustable in tension by means of a lever at the side, lockable in 5 positions, backrest reverse lock safety mechanism. > Seat depth adjustable through 55 mm and lumbar support adjustable in height through 75 mm (Team Progress Air) > Dimensions: Fabric model. Backrest: W. 53 x H. 54 cm. Seat: W. 51 x D. 47 x H. 45.5/55.5 cm. Mesh model. Backrest: W. 53 x H. 53.5 cm. Seat: W. 52 x D. 46 x H. 44.5/54.5 cm
311 Team Synchro Air Synchro, standard fixed seat, high back chair with mesh backrest. Optional HA arms Team Synchro Synchro mechanism, standard fixed seat, high fabric back with lumbar support. Optional HA arms. Cantilever-base medium back visir chair with fabric backrest. 2 choices of cat. A fabric colour (+ fab. A) FG Srm grey FA Celestial black / standards 3 14001 9001 Complies with EN 1335 1/2/3 *except Team synchro * BLACK BASE VERSION, CAT. A FABRICS FROM STOCK Team Progress Air chair, with adjustable seat and lumbar support 5 348 025 + fab A + SV TI 417 1 mesh colour TI Team Synchro Air chair, with standard fixed seat 5 348 007 + fab A + SV TI 361 3 choices of finish for base Team Progress chair, with adjustable seat and lumbar support SB SQ SV Grey aluminium Polished Aluminium nylon 5 350 002 + fab A + SV 319 Optional extras premium cat. A fabrics avail. on request - allow 5 6 weeks (+ fab A) + 00* cat. B fabrics avail. on request - allow 5 6 weeks (+ fab B) + 21* cat. C fabrics not available Shades and codes see pages 346-347 *compared cat. A fabrics (+ fab. A) grey aluminium base available from sck (+ SB) + 34** polished aluminium base avail. from sck (+ SQ) (+ SQ) + 38** **compared black base version (+ SV/SG) Accessories available from sck set of 4D armrests (adj. in height,width, depth, rotation)* 5 532 015 98 set of height-adjustable arms* 5 532 013 64 *for work chairs Team Synchro chair, with standard fixed seat 5 532 003 + fab A + SV 276 Team Synchro chair, with standard fixed seat and lumbar support > and aluminium frame models avail. from sck. Sold exclusively in pairs of the same colour. 5 532 034 + fab A + SG 344 Unit price 172
312 ErgonomicChairs/ Touch High back synchro chair with mesh back and optional 4D armrests Touch Executive leather high back synchro chair with headrest. Mesh backrest and 4D armrests. Optional chrome casrs. > Synchro mechanism, adjustable in tension by means of a lever at the side, backrest reverse lock safety mechanism > or self-regulating mechanism that aumatically adjusts tension according the weight of the user > Seat depth adjustable through 70 mm > Synchro mechanism lockable in 5 positions and 3 different lock-levels for the self-regulating chair. > Eco-friendly, hypoallergenic CMHR polyurethane foam (M4 fire resistance rating). 10993 certified. > Dimensions: Synchro and self-regulating backrest: H. 59 x W. 47 cm and seat: W. 47 x D. 48 x H. 45/58 cm Visir: backrest H. 50 x W. 47 and seat: W. 48 x D. 50 x H. from 43 48 depending on model.
313 Self-regulating high back synchro chair with mesh back and optional 4D arms. Cantilever-base armchair. Leather conference chair with fixed point aumatic return and fixed arms. 3 choices of cat. B fire-resistant (M1) fabric colour (+ fab. B) / standards BLACK BASE VERSION, CAT. B FABRICS FROM STOCK DU UZ DO Plum Iron grey 5 choices of leather colour (+ leather) 5 Self-regulating chair with lumbar support and headrest 5 074 033 + fab B + SV IL 485 Self-regulating chair with lumbar support 5 074 034 + fab B + SV IL 434 YB YC YQ YP IL SF IK SQ SV YR Ivory Taupe Plum Chestnut On request 2 choices of mesh colour (depending on model) Designer black Velvet black 3 choices of finish for base White Polished aluminium Optional extras premium cat. A fabrics avail. on request - allow 4 weeks (+ fab A) - 17* cat. B fabrics avail. on request - allow 4 weeks (+ fab B) + 00* cat. C fabrics avail. on request - allow 6 weeks (+ fab C) + 21* Shades and codes see pages 346-347 *premium on standard pricing of cat. B fabrics (+ fab. B) coloured leather avail. on request - allow 6 weeks + 55** **premium on standard pricing of black leather (+ YB) white nylon base for seat avail. from sck (+ SF) + 10*** polished aluminium base avail. from sck (+ SQ) + 34*** ***premium on standard pricing of black base version (+ SV/SG) Accessories available from sck set of 5 black casrs ø 65 mm for hard floors* 5 643 022 16 set of 5 chrome casrs ø 65 mm for hard floors* 5 888 019 33 set of adjustable soft uch 4D armrests (adjustable 5 074 009 in height, width, depth, rotation)* 118 set of adjustable soft uch 2D arms (adjustable in height and width)* 5 074 026 81 standard fixed arms in black nylon for visir chair 5 074 012 SV 36 standard fixed arms in polished aluminium for visir chair 5 074 012 SQ 84 *for work chairs Synchro chair with lumbar support and headrest 5 074 032 + fab B + SV IL 468 Synchro chair with lumbar support 5 074 035 + fab B + SV IL 417 Synchro chair 5 074 036 + fab B + SV IL 387 Conference chair, fixed point aumatic return available with polished aluminium base 5 074 023 + fab B + SQ IK 327 Cantilever-base chair, available with chrome finish base 5 074 024 + fab B + SQ IK 314 Cantilever-base visir chair 5 074 025 + fab B + SG IK 220 VERSION WITH POLISHED ALUMINIUM BASE, BLACK LEATHER AVAILABLE FROM STOCK Executive leather high back synchro chair, with lumbar support, headrest and 4D arms 5 074 031 + leather + SQ IK 684 Leather conference chair with fixed point aumatic return and fixed arms 5 074 019 + leather + SQ IK 400
314 ErgonomicChairs / Cosmo Synchro Plus - mesh backrest. Optional 3D arms Cosmo Self-regulating, high back chair with mesh backrest and lumbar support. Optional 4D arms > Synchro Plus mechanism, adjustable in tension according the weight of the user. Lockable in 5 positions, with backrest reverse lock safety mechanism > Self-regulating mechanism that aumatically adjusts its tension (6 comfort settings). Backrest lockable in 3 positions + 1 upright position + 1 free position. > Central axis tilt mechanism, lockable in 3 positions > Seat depth is adjustable on Synchro and Self-regulating models (through 55 mm) > Visir and tilting chairs fitted with eco-friendly, hypoallergenic CMHR polyurethane foam (M4 fire safety classification). Certified STANDARD 10993. > Visir chairs available in 3 models (white shell available on request, contact us for further information) - Cantilever-base visir chair - Stackable cantilever chair with arms - Visir conference chair with fixed point aumatic return Dimensions: Synchro and self-regulating. Backrest: H. 57 x W. 47 cm; Seat: W. 51 x D. 46 x H. 46/58 cm Visir and tilting chairs. Backrest: H. 50 x W. 47 cm; Seat: W. 48 x D. 50 x H. 37 48 cm depending on model
315 Central axis tilt chair, mesh backrest. Optional fixed black nylon arms Video-conference chair with fixed point aumatic return and mesh backrest. Fixed arms in polished aluminium Cantilever chair with mesh backrest and structural arms 2 choices of cat. A fabric colour (+ fab. A) / standards BLACK BASE VERSION, CAT. A FABRICS FROM STOCK FG* FA Srm grey Celestial black (*visir chairs only) 2 choices of cat. B fire-resistant (M1) fabric colour (+ fab. B) DU DO Plum 1 mesh colour IK Velvet black 3 choices of finish for base 5 Self-regulating chair with mesh backrest and lumbar support 5 080 035 + fab A + SV IK 370 Synchro Plus chair, mesh backrest and lumbar support 5 080 032 + fab A + SV IK 340 Synchro Plus chair, mesh backrest 5 080 044 + fab A + SV IK 332 Central axis tilt chair, mesh backrest 5 080 080 + fab A + SV IK 246 SB SQ SV Aluminium grey Polished aluminium nylon Optional extras premium cat. A fabrics avail. on request - allow 4 weeks (+ fab A) + 0* cat. B fabrics from sck or on request - allow 4 weeks (+ fab B) + 17* cat. C fabrics avail. on request - allow 6 weeks (+ fab C) + 38* *premium on standard pricing of cat. A fabrics (+ fab. A) grey aluminium base available from sck (+ SB) + 26** polished aluminium base avail. from sck (+ SQ) + 32** Shades and codes see pages 346-347 **premium on standard pricing of black base version (+ SV/SG) Accessories available from sck set of 5 casrs ø 50 mm for hard floors* 5 643 020 10 set of 5 self-locking casrs ø 50 mm* 5 643 032 8 set of 4D arms (adjustable in height, width, depth and 5 080 217 SQ rotation)* 93 set of 3D arms (adjustable in height, width and 5 080 216 SV rotation) for synchro, self-regulating and tilting chairs 72 set of fixed arms in polished aluminium for visir and 5 080 027 SQ tilting chairs 84 set of fixed arms in black nylon for visir and tilting chairs 5 080 027 SV 36 *for synchro and self-regulating chairs Video-conference chair with fixed point aumatic return and mesh backrest (only avail. with polished aluminium base SQ) 5 080 069 + fab A + SQ IK 310 Cantilever-base chair with structural arms and mesh backrest (only avail. with polished aluminium base SQ) 5 080 066 + fab A + SQ IK 297 Cantilever visir chair, mesh backrest (not avail. in alum. base SB ; + 9 for chrome base SQ) 5 080 068 + fab A + SG IK 203
316 ErgonomicChairs / Cosmo Synchro Plus chair, fabric backrest. Optional 3D arms Synchro Plus chair, fabric backrest. Optional 4D arms «Combining stylish, fluid design and ergonomics, COSMO adapts your anamy and offers superior comfort at all times.» PASCALE HUART, Head of Sales
317 Self-regulating chair, upholstered backrest. Optional 3D armrests Cantilever visir chair, upholstered back Cantilever chair, upholstered backrest. Structural arms 2 choices of cat. A fabric colour (+ fab. A) / standards BLACK BASE VERSION, CAT. A FABRICS FROM STOCK FG* FA Srm grey Celestial black (*visir chairs only) 5 Self-regulating chair, fabric backrest 5 080 059 + fab. A + SV 332 2 choices of cat. B fire-resistant (M1) fabric colour (+ fab. B) Synchro Plus chair, fabric backrest 5 080 056 + fab. A + SV 302 DU Plum DO Central axis tilt chair, fabric backrest 5 080 082 + fab. A + SV 237 3 choices of finish for base SB SQ SV Aluminium grey Polished aluminium nylon Optional extras premium cat. A fabrics avail. on request - allow 4 weeks (+ fab A) + 0* cat. A fabrics avail. from sck or on request - allow 4 weeks (+ fab B) + 17* cat. C fabrics avail. on request - allow 6 weeks (+ fab C) + 38* *premium on standard pricing of cat. A fabrics (+ fab. A) grey aluminium base available from sck (+ SB) + 26** polished aluminium base avail. from sck (+ SQ) + 32** Shades and codes see pages 346-347 **premium on standard pricing of black base version (+ SV/SG) Accessories available from sck set of 5 casrs ø 50 mm for hard floors* 5 643 020 10 set of 5 self-locking casrs ø 50 mm* 5 643 032 8 set of 4D arms (adjustable in height, width, depth and 5 080 217 SQ rotation)* 93 set of 3D arms (adjustable in height, width and 5 080 216 SV rotation) for synchro, self-regulating and tilting chairs 72 set of fixed arms in polished aluminium for visir and 5 080 027 SQ tilting chairs 84 set of fixed arms in black nylon for visir and tilting chairs 5 080 027 SV 36 *for synchro and self-regulating chairs Video-conference chair, fixed point aumatic return, fabric backrest (only available with polished aluminium SQ base) 5 080 076 + fab. A + SQ 302 Cantilever visir chair with arms and fabric backrest (only available with polished aluminium SQ base) 5 080 073 + fab. A + SQ 288 Cantilever visir chair, fabric backrest (not available in alu. grey finish SB; + xx for base in chrome finish SQ) 5 080 075 + fab. A + SG 195
318 ErgonomicChairs / Win High back synchro chair with fabric backrest, standard seat and 2D arms High back synchro chair with mesh backrest and lumbar support, ergonomic seat and 4D arms Win > Standard seat model: Synchro mechanism, adjustable in tension by means of a hand-wheel under the seat, lockable in 5 positions, backrest reverse lock safety mechanism. Fixed seat. > Ergonomic seat model : Synchro mechanism, adjustable in tension by means of a lever at the side, lockable in 5 positions. Backrest reverse lock safety mechanism and adjustable seat depth (through 60 mm) > Eco-friendly polyurethane foam (M4 fire resistance rating). 10993 certified. > Dimensions: Fabric backrest: H. 51 x W. 44cm; Mesh backrest: H. 62 x W. 49 cm, Standard seat: W. 51 x D. 45 x H. 45/57 cm; Ergonomic seat: W. 47 x D. 48 x H. 46/58 cm «WIN, where ergonomics and versatility converge produce the indispensable solution affordable seating.» ARNAUD AUTON, Regional Manager
319 High back synchro chair with fabric backrest, ergonomic seat and 2D arms High back synchro chair with fabric backrest, standard seat and arms ajdustable in width Cantilever visir chair, fabric back 3 choices of cat. A fabric colour for standard seat (+ fab. A) KP FG FA Aubergine Srm grey Celestial black 3 choices of cat. B fire-resistant fabric colour for ergonomic seats (+ fab. B) / standards 5 BLACK BASE VERSION, CAT. A FABRICS FOR STANDARD SEATS AND CAT. B FOR ERGONOMIC SEATS, BLACK MESH UH - FULLY ASSEMBLED CHAIRS High back synchro chair with mesh backrest and lumbar support With 4D adjustable arms, ergonomic seat* 5 653 014 + fab. B + SV UH 513 With 2D adjustable arms, ergonomic seat* 5 653 012 + fab. B + SV UH 476 DU UZ DO Plum Iron grey 5 choices of mesh colour (+ mesh) UH IE IF UG IG SQ Red On request 2 base finishes SV Polished aluminium (depending on model) Blue Optional extras Grey Graphite grey premium cat. A fabrics avail. on request - allow 4 weeks (+ fab. A) + 00* cat. B fabrics avail. on request - allow 4 weeks (+ fab. B) + 17* cat. C fabrics avail. on request - allow 6 weeks (+ fab. C) + 38* *premium on standard pricing for cat. A fabrics for standard seats cat. A fabrics avail. on request - allow 4 weeks (+ fab. A) - 17** cat. B fabrics avail. on request - allow 4 weeks (+ fab. B) + 00** cat. C fabrics avail. on request - allow 6 weeks (+ fab. C) + 21** **premium on standard pricing for cat. B fabrics for ergonomic seats (+ fab. B) coloured mesh avail. on request - allow 4 weeks (+ mesh) + 17*** ***premium on standard pricing for black mesh UH (+ mesh) polished aluminium base avail. from sck or on request (+ SQ) + 34**** ****premium on standard pricing for black base version (+ SV/SG) Models with hard-floor casrs ø 50 mm on request - allow 6 weeks contact us for details + 4 Other configurations avail. on request - allow 6 weeks contact us for details Accessories available from sck set of 5 casrs ø 50 mm for hard floors 5 643 020 10 High back synchro chair with mesh backrest With 2D adjustable arms, ergonomic seat 5 653 011 + fab. B + SV UH 451 Without arms, ergonomic seat 5 653 010 + fab. B + SV UH 370 With width-adjustable arms, standard seat 5 653 009 + fab. A + SV UH 319 Without arms, standard seat 5 653 008 + fab. A + SV UH 281 High back synchro chair with fabric backrest With 4D adjustable arms, ergonomic seat* 5 651 027 + fab. B + SV 437 With 2D adjustable arms, ergonomic seat* 5 651 023 + fab. B + SV 400 With 2D adjustable arms, standard seat 5 651 025 + fab. A + SV 285 Without arms, standard seat 5 651 024 + fab. A + SV 230 Synchro chair with fabric back With width-adjustable arms, standard seat 5 651 029 + fab. A + SV 259 Without arms, standard seat 5 651 028 + fab. A + SV 221 Cantilever visir chair with fabric back* > fabric FA from sck 5 893 015 + fab. A + SG 191 *Option : contact us for polished aluminium base from sck
320 OperarChairs / Opus High back synchro chair with fabric backrest and headrest. Optional fixed designer arms High back synchro chair with mesh backrest. Optional 3D arms, headrest with incorporated coat hanger and lumbar support Opus > Synchro mechanism, adjustable in tension, lockable in 5 positions and fitted with backrest reverse lock safety mechanism Seat depth adjustable through 60 mm > Height-adjustable backrest (through 60 mm for fabric backrest and 50 mm for mesh backrest) Dimensions: Fabric backrest: H. 55 x W. 46 cm; mesh backrest: H. 62 x W. 46 cm. Seat: W. 51 x D. 48 x H. 42/55 cm «A chair with a unique design that responds the tastes and needs of every user.» CAROLYN ANGUS, General manager UK & Ireland
321 High back synchro chair with fabric backrest. Optional fixed designer arms High back synchro chair with mesh backrest. Optional fixed designer arms Cantilever visir chair, fabric back. 2 choices of cat. A fabric colour (+ fab. A) / standards BLACK BASE VERSION, CAT. A FABRICS FROM STOCK FG Srm grey FA Celestial black 2 choices of cat. B fire-resistant fabric colour (+ fab. B) 5 High back synchro chair with fabric back and headrest 5 111 017 + fab. A + SV 332 DU DO Plum 1 mesh colour IZ 2 choices of finish for base High back synchro chair with fabric back 5 111 010 + fab. A + SV 272 SQ SV Polished aluminium nylon Optional extras Accessories available from sck premium cat. A fabrics avail. on request - allow 4 weeks (+ fab. A) + 00* cat. B fabrics avail. on request - allow 4 weeks (+ fab. B) + 17* cat. C fabrics avail. on request - allow 6 weeks (+ fab. C) + 38* Shades and codes see pages 346-347 *premium on standard pricing for cat. A fabrics (+ fab. A) polished aluminium base avail. from sck (+ SQ) + 38** **premium on standard pricing for black base version (+ SV/SG) set of 5 casrs ø 50 mm for hard floors* 5 643 020 10 set of 5 self-locking casrs ø 50 mm* 5 643 032 8 set of 3D arms (adjustable in height, width and rotation)* 5 111 004 SV 64 set of fixed arms* 5 111 001 SV 43 height-adjustable lumbar support for mesh backrest (adj. through 110 mm)* 5 111 016 SV 10 headrest with integrated coat hanger for mesh backrest* 5 111 018 + fab. A 77 5 111 018 + fab. B 81 headrest for mesh backrest* 5 111 015 + fab. A 64 5 111 015 + fab. B 68 *for task chairs High back synchro chair with mesh back 5 111 009 + fab. A + SV IZ 310 Cantilever-base visir chair with fabric back > FA fabric from sck 5 111 011 + fab. A + SG 191
322 OperarChairs / Net@work Synchro chair, standard seat and fabric backrest. Optional height-adjustable arms Net@work High back synchro chair with mesh backrest, headrest and adjustable seat. Optional 2D arms > Synchro mechanism with integrated seat depth adjustment system (through 50 mm), adjustable in tension by means of a lever at the side. Backrest reverse lock safety mechanism > Or standard synchro mechanism with standard fixed seat, adjustable in tension by means of a lever at the side. Backrest reverse lock safety mechanism > Synchro mechanisms lockable in 5 different positions - seats featuring the permanent contact mechanism are lockable in any position desired > Mesh fixed backrests and upholstered height-adjustable backrests (through 70 mm for high backrest and 60 mm for standard backrest) > Eco-friendly, hypoallergenic CMHR polyurethane foam (M4 fire resistance rating). 10993 certified. > Dimensions: high back model/ standard fabric backrest model: H. 54/48 x W. 50/47 cm; high mesh back with headrest / high mesh back: H. 92/62 x W. 46 cm; adjustable seat and fixed seat: W. 51 x D. 46 x H. 43/56 cm
323 High back synchro chair with mesh backrest and standard seat. Optional 2D arms Cantilever visir chair, standard fabric backrest. Cantilever visir chair, standard mesh backrest. 3 choices of cat. A fabric colour (+ fab. A) FI FG FA Bright red Srm grey Celestial black 8 choices of mesh colour (+ mesh) UH IB IC ID White Aniseed green Orange On request IE IF UG IG Red Blue Grey Graphite grey On request 2 choices of finish for base / standards 5 BLACK BASE VERSION, CAT. A FABRICS FROM STOCK BLACK MESH UH High back synchro chair with mesh backrest, headrest and adjustable seat 5 637 004 + fab. A + SV UH 279 High back synchro chair with mesh backrest and adjustable seat 5 637 006 + fab. A + SV UH 270 High back synchro chair, standard seat and mesh backrest 5 883 012 + fab. A + SV UH 217 High back synchro chair with fabric backrest and adjustable seat (available on request, allow 4 weeks) 5 883 015 + fab. A + SV 235 SB SV Aluminium grey nylon Optional extras premium cat. A fabrics avail. on request - allow 4 weeks (+ fab. A) + 00* cat. B fabrics avail. on request - allow 4 weeks (+ fab. B) + 21* cat. C fabrics avail. on request - allow 6 weeks (+ fab. C) + 43* Shades and codes see pages 346-347 *premium on standard pricing of cat. A fabrics (+ fab. A) coloured mesh avail. on request - allow 4 weeks (+ mesh) + 17** **premium on standard pricing of black mesh (+ UH) grey aluminium base available from sck (+ SB) + 26*** ***premium on standard pricing of black base version (+ SV/SG) Accessories available from sck set of 5 casrs ø 50 mm for hard floors* 5 643 020 10 set of 5 self-locking casrs ø 50 mm* 5 643 032 8 set of adjustable 4D arms (height,width, depth, rotation)* 5 883 036 93 set of adjustable 2D arms (height and width)* 5 883 035 58 set of height-adjustable arms* 5 883 034 36 *for task chairs High back synchro chair with fabric backrest and standard seat 5 883 024 + fab. A + SV 186 Permanent contact mechanism chair, standard seat, standard fabric backrest (available on request, allow 4 weeks) 5 883 021 + fab. A + SV 152 Cantilever visir chair, standard mesh backrest (available on request, allow 4 weeks) 5 637 003 + fab. A + SG UH 220 Cantilever visir chair, standard fabric backrest (available on request, allow 4 weeks) 5 615 079 + fab. A + SG 161
324 OperarChairs / Scoop High back synchro chair with fabric back. Optional 2D arms Scoop High back synchro chair, polypropylene back Optional 2D arms > Synchro mechanism, adjustable in tension, lockable in 5 positions, backrest reverse lock safety mechanism > Or permanent contact mechanism lockable in any position > Synchro chair: backrest adjustable in height by means of rack and pinion gear (through 60 mm) > Draughtman s chair fitted with glides or self-locking casrs (lock when user is seated) > Dimensions: Fabric backrest: H. 48 x W. 44 cm, polypro back: H. 52 x W. 45 cm and seat: W. 48 x D. 45 x H. 45/58 cm
325 High back draughtsman s chair with permanent contact mechanism, simulated leather covering High back chair with fabric backrest and permanent contact mechanism. Optional arms adjustable in width Cantilever visir chair, standard fabric backrest, height-adjustable. 5 choices of cat. A fabric colour/simulated leather (+ fab. A) / standards BLACK BASE VERSION, CAT. A FABRICS FROM STOCK FE FC Royal bordeaux Electric blue FG Srm grey 3 High back synchro chair with polypropylene backrest 5 509 024 + fab. A + SV 195 FA Celestial black YA simulated leather High back synchro chair with fabric/simulated leather back 5 509 005 + fab. A + SV 174 2 choices of cat. B fire-resistant fabric colour (+ fab. B) DU Plum DO High back permanent contact chair with fabric/simulated leather back 5 509 003 + fab. A + SV 135 1 base finish SV nylon Optional extras premium cat. A fabrics avail. on request - allow 4 weeks (+ fab. A) + 00* cat. B fabrics from sck or on request - allow 4 weeks (+ fab. B) + 21* cat. C fabrics avail. on request - allow 6 weeks (+ fab. C) + 43* Shades and codes see pages 346-347 *premium on standard pricing of cat. A fabrics (+ fab. A) Accessories available from sck set of 5 casrs ø 50 mm for hard floors* 5 643 019 10 set of 5 self-locking casrs ø 50 mm* 5 643 031 8 set of adjustable 2D arms (height and width)* 5 509 031 SV 55 set of width-adjustable arms* 5 509 030 SV 38 set of fixed arms for visir chairs 5 644 004 31 *for task chairs High back draughtsman s chair with permanent contact mechanism, fabric/ simulated leather covering On glides 5 509 001 + fab. A + SV 191 Fitted with self-locking casrs 5 509 027 + fab. A + SV 200 Cantilever visir chair, standard fabric/simulated leather backrest. > fabric FA and black simulated leather YA from sck 5 650 005 + fab. A + SG 145
326 OperarChairs / Globe High back synchro chair with height-adjustable arms High back synchro chair with height-adjustable arms Globe Choice of 35 fabrics available on request (4 weeks fab. A & B - 6 weeks fab. C) Shades and codes: see pages 346-347. High back synchro chair Cat. A fabric, black nylon base 5 655 001 + fab. A + SV 259 High back synchro chair, HA arms Cat. A fabric, black nylon base 5 655 002 + fab. A + SV 293 Cantilever-base visir chair FA fabric colour available from sck Cat. A fabric, black metal base 5 650 005 + fab. A + SG 145 Cat. B: + 21 premium on the standard pricing of cat. A fabrics Cat. C: + 43 premium on the standard pricing of cat. A fabrics > Synchro mechanism adjustable in tension, lockable in 5 positions. Seat depth is adjustable (through 50 mm) > Backrest features reverse lock safety mechanism and height adjustment through 60 mm (rack and pinion gear) > reinforced nylon base > Dimensions: Backrest: W. 48 x H. 58 cm and seat : W. 51 x D. 48 x H. 42/53 cm / standards 5 Optional extras > Set of 5 casrs Hard floors 5 643 019 10 Self-locking 5 643 031 8 4 choices of cat. A fabric colour (+ fab. A) KP FC FG FA Aubergine Electric blue Srm grey Celestial black
SpecialistChairs / Secretarial 327 24h Allday High back chair Standard back chair > Synchro mechanism lockable in multiple positions with backrest reverse lock safety mechanism > Standard back chair, adjustable seat depth and 2D arms > High back chair with fixed seat and arms > 5 point star base in black nylon > Dimensions: Standard back: Backrest: W. 51 x H. 79 cm and seat: W. 53 x D. 50 x H. 47/58 cm High back: Backrest: W. 52 x H. 87 cm and seat: W. 53 x D. 52 x H. 42/54 cm Standard back chair 24h Fabric 5 677 004 + fab. + SV 1097 High back chair 24h Fabric 5 677 001 + fab. + SV 1560 4 choices of 24h fabric colour (+ fab) 3 Onyx UD UE UF UC Blueberry Coal Cobalt blue On request N 1 > High back permanent contact mechanism, lockable in any position > Back height adjustable (through 70 mm) > 5 point star base in black nylon > Dimensions: Backrest: W. 44 x H. 50 cm and seat: W. 50 x D. 40.5 x H. 42/54 cm Cat. A fabric from sck 5 307 009 + fab. A + SV 149 Set of height-adjustable arms 5 307 013 SV 57 25 fabric colours available on request codes: see pages 346-347. Cat. B: + 21 premium on the standard pricing of cat. A fabrics Cat. C: not available 3 4 choices of cat. A fabric colour (+ fab. A) FI FC FG FA Bright red Electric blue Srm grey Celestial black Smile Optional fixed arms Buzz Optional fixed arms 3 1 M1 fabric colour UB > Asynchro mechanism, lockable in multiple positions > High back model > Foam is certif. CMHR fire-retardant > Fabric upholstering is certif. fireretardant British Standard > 5 point star base in black nylon > Dimensions: Dossier : Backrest: W. 45 x H. 50 cm and seat: W. 50 x D. 47 x H. 42/54 cm 3 choices of fabric colour (+ fab) TT TV TW Electric blue Srm grey > Permanent contact mechanism lockable in any position > nylon base > Dimensions: Backrest: W. 43 x H. 50 cm and seat: W. 47 x D. 46 x H. 44/56 cm fire-retardant fabric 5 280 019 UB SV 127 Fabric from sck 5 642 001 + fab. + SV 81 Set of fixed arms 5 280 020 SV 17 Set of fixed arms 5 280 024 SV 26
328 Pray SpecialistChairs / Workshop&Draughtsman schairs > Ergonomic kneeling chair : tiltable seat, fixed knee rest > Seat height adjustable by means of a gas lift mechanism > 5 point star base in black nylon > Dimensions: Seat: W. 40 x D. 34 x H. 49/61 cm and knee rest: W. 46 x D. 22 cm Cat. A black fabric 5 280 021 FA SV 174 1 cat. A fabric colour FA Celestial black Draughtsman s sol 18 mm thick 65 mm thick > Fitted with non-slip glides, fixed footrest and chrome base > Seat height adjustable by means of a gas lift mechanism > Dimensions: Wooden model: seat ø 35 x H. 66/75 cm, simulated leather model: seat ø 34 x H. 66/ 79 cm Beech seat from sck 5 511 001 WP 110 simulated leather from sck 5 511 001 YA 127 2 choices of colour Multi-purpose sol WP Natural beech plywood YA simulated leather > Padded and upholstered in black fabric > Seat height adjustable by means of a gas lift mechanism > nylon base on casrs > Dimensions: ø 35 x H. 47/65 cm Cat. A black fabric 5 052 012 FA SV 100 1 cat. A fabric colour FA Celestial black Jump sit-stand sol > Fire-resistant and antibacterial Ginkgo covering > Seat height adjusts by means of a gas lift mechanism, tilts suit any user position > Self-locking casrs (lock when user is seated) > nylon base on casrs > Dimensions: W. 42 x H. 66/79 cm Ginkgo fabrics 5 112 001 + fab. 203 5 5 choices of Ginkgo colour fabric (+ fab) II VQ IJ VV VT Apple green Graphite grey Putty Quetsche Night blue On request
SpecialistChairs / Workshop&Draughtsman schairs 329 Draughtsman s chairs, fabric or simulated leather 3 > Permanent contact mechanism > Seat height adjustable by hand wheel > Seat height adjustable by means of a gas lift mechanism > Dimensions: Backrest: W. 43 x H. 41 and seat : W. 46 x D. 43 x H. 65/77 cm On glides 5 114 006 + fab. + SV 157 Fitted with self-locking casrs (lock when user is seated) 5 114 007 + fab. + SV 166 7 choices of fabric/simulated leather colour (+ fab) KO KN FH FC FG FA YA Green Violet Coral orange Electric blue Srm grey Celestial black simulated leather Draughtsman s chairs, wood or simulated leather > Fitted with non-slip glides, fixed footrest and chrome base > Seat height adjustable by means of a gas lift mechanism > Dimensions: Wooden model: Backrest W. 41 x H. 18 cm and seat: W.40 x D. 40 x H. 62/75 cm / Simulated leather model: Backrest: W. 41 x H. 11 cm and seat: W. 44 x D. 38 x H. 64/77 cm Wooden model 5 511 002 WP 153 Simulated leather 5 511 002 YA 136 2 choices of colour WP Natural beech plywood YA simulated leather Polyurethane draughtsman s chair 3 Sit-stand sol > Height-adjustable seat > nylon base on glides > Dimensions: W. 34 x D. 24 x H. 49/68 cm Typist chair > Height-adjustable seat and backrest > nylon base on casrs > Dimensions: Backrest: W. 42 x H. 31 cm and seat: W. 46 x D. 43 x H. 43/56 cm Draughtsman > Height-adjustable seat and backrest > nylon base on glides, chrome finish tubular steel footrest > Dimensions: Backrest: W. 42 x H. 31 cm and seat: W. 46 x P. 43 x H. 53/74 cm 5 678 005 PA SV 136 5 678 004 PA SV 140 5 678 003 PA SV 169
330 Seating / Passe-parut Fabric cantilever chairs Sold exclusively in pairs of the same colour. > Tubular steel cantilever structure ø 25 mm. > Innovative seat design : «comfort air» system, made from flexible yet nondeformable high quality moulded polyurethane foam.. > Polypropylene armrests. 48 49 47 46 50 58 65 High back model Aluminium grey base Cat. A fabrics - set of 2 5 351 046 + fab. A + SB 459 Unit price 229.50 Chrome base (allow 5-6 weeks for delivery) Cat. A fabrics - set of 2 5 351 046 + fab. A + SQ 561 Unit price 280.50 49 31 49 46 49 58 65 Medium back model base Cat. A fabrics - set of 2 5 351 045 + fab. A + SG 344 Unit price 172 Aluminium grey base Cat. A fabrics - set of 2 5 351 045 + fab. A + SB 353 Unit price 176.50 / standards 3 9001 14001 3 choices of cat. A fabric colour (+ fab. A) FC FG FA DU DO Electric Srm grey blue Celestial black 2 choices of cat. B fire-resistant fabric colour (+ fab. B) Plum 24 fabrics available on request (allow 5-6 weeks for delivery). Shades and codes: see pages 346-347 Cat. B fabrics: + 21 premium on the standard pricing of cat. A fabrics (+ fab. B) Cat. C fabrics: not available
Seating / Passe-parut 331 Leather cantilever chairs with wooden back panel > Leather upholstered seat with stained beech plywood back panel > Tubular steel cantilever base with narrowing armrest profile. Polyurethane non-slip glides > Conical polypropylene armrests (pre-fitted). > Conured foam padding PP HD cuir/bois 48 49 48 46 64 48 56 High back model Aluminium grey base Finish from sck - unit price 5 351 034 + fin. 361 3 choices of finish on request (allow 5 6 weeks for delivery) Model on request: + 55 premium on the standard pricing for models from sck / standards CORRECTED- 3 GRAIN LEATHER 9001 14001 (KIPSKIN) 8 choices of leather/wood combinations (+ fin.) YCSBXK YBSBXK YBSBXM YCSBXJ YBSBXJ Leather / simulated leather cantilever chairs Sold exclusively in pairs of the same colour. > Tubular steel cantilever base ø 25 mm. > Innovative seat design : «comfort air» system, made from flexible yet non-deformable high quality moulded polyurethane foam > Polypropylene armrests YESBXF Ivory/ Walnut / Walnut / Cherry Ivory/ Wenge / Wenge Chocolate/ Light oak On request Matching with executive furniture in XF and JQ; XK and JS; XM and RH YBSBXF / Light oak YESBXJ Chocolate/ Wenge 48 49 47 46 50 58 65 High back model Aluminium grey base Simulated leather - set of 2 5 351 048 YA SB 408 Unit price 204 leather - set of 2 5 351 050 + leather + SB 570 Chrome base Unit price 285 Simulated leather - set of 2 5 351 048 YA SQ 506 Unit price 253 leather - set of 2 5 351 050 + leather + SQ 655 Unit price 327.50 49 31 49 46 49 58 65 Medium back model Aluminium grey base Simulated leather - set of 2 5 351 047 YA SB 349 Unit price 174.50 leather - set of 2 5 351 049 + leather + SB 527 Unit price 263.50 Chrome base (allow 5-6 weeks for delivery) Simulated leather - set of 2 5 351 047 YA SQ 455 Unit price 227.50 leather - set of 2 5 351 049 + leather + SQ 625 Unit price 312.50 / standards 1 simulated leather 3 colour 9001 14001 CORRECTED- GRAIN LEATHER (KIPSKIN) YA YB YC YQ YE YU 5 choices of leather colour (+ leather) Ivory Taupe On request Chocolate Graphite grey 4 choices of leather colour on request (allow 5-6 weeks for delivery) Coloured leather: + 55 premium on the standard pricing of black leather YB
332 Seating / Passe-parut Cantilever chairs mesh backrest 48 30 48 47 48 55 66 Sold exclusively in pairs of the same colour (fabric models) > Tubular steel cantilever base ø 25 mm with narrowing armrest profile. Conical polypropylene armrests (pre-fitted). > Chair with fabric seat fitted with black mesh backrest; chair with leather seat fitted with matching black, white or graphite grey mesh backrest. > Conured polyurethane foam padding Medium back model > Dimensions: backrest H. 30 x W. 48 cm and seat W. 48 x D. 47 x H. 48 cm base Cat. A fabrics - set of 2 5 351 006 + fab. A + SG TI 544 Aluminium grey base Unit price 272 Cat. A fabrics - set of 2 5 351 006 + fab. A + SB TI 595 Chrome base Unit price 297.50 leather unit price 5 380 011 + leather + SQ + mesh 395 / standards 3 9001 14001 CORRECTED- GRAIN LEATHER (KIPSKIN) 1 cat. A fabric colour (+ fab. A) FA Celestial black 3 choices of leather / mesh combinations (+ leather) YBSQTI / black YHSQIR White/ white On request YUSQIM Graphite grey/ graphite grey Cantilever chairs with tilting mesh backrest 28 choices of fabrics and 2 choices of leather colour on request (allow 5-6 weeks for delivery) Shades and codes: see pages 346-347 Cat. B fabrics: + 21 premium on the standard pricing of cat. A fabrics Cat. C fabrics: not available Leather/colour mesh: + 55 premium on standard pricing of black leather/mesh (YBSQTI) Sold exclusively in pairs of the same colour > Tubular steel cantilever base ø 25 mm with narrowing armrest profile. Conical polypropylene armrests (pre-fitted). > Conured polyurethane foam padding. > Tilting black mesh backrest / standards 3 9001 14001 1 cat. A fabric colour (+ fab. A) FA Celestial black 50 36 47 44 49 58 66 Medium back model Aluminium grey base Cat. A fabrics - set of 2 5 351 004 + fab. A + SB TI 676 Chrome base (allow 4-6 weeks for delivery) 28 choices of fabrics on request (allow 5-6 weeks for delivery) Shades and codes: see pages 346-347 Unit price 338 Cat. A fabrics - set of 2 5 351 004 + fab. A + SQ TI 757 Unit price 378.50 Cat. B fabrics: + 21 premium on the standard pricing of cat. A fabrics Cat. C fabrics: not available Cantilever chairs with tilting mesh backrest and mesh seat (Allow 5 6 weeks for delivery) Sold exclusively in pairs of the same colour. > Tubular steel cantilever base ø 25 mm with narrowing armrest profile. Conical polypropylene armrests (pre-fitted). > Conured polyurethane foam padding. > Mesh seat and tilting black mesh backrest 50 36 47 44 49 58 66 Medium back model Aluminium grey base mesh set of 2 5 351 010 + mesh + SB 629 Unit price 314.50 Chrome base (allow 4-6 weeks for delivery) mesh set of 2 5 351 010 + mesh + SQ 710 Unit price 355 / standards 3 9001 14001 3 choices of mesh colour (+ mesh) TI IR IM White Graphite grey On request 2 choices of mesh colour on request (Allow 5-6 weeks for delivery) Coloured mesh: + 13 premium on the standard pricing of black mesh TI
333 Cantilever chairs with polycarbonate backrest Sold exclusively in pairs of the same colour. > Tubular steel cantilever base ø 25 mm. Polycarbonate armrests designed as a continuation of the backrest >Chair with fabric seat with transparent polycarbonate backrest > Conured polyurethane foam padding 53 27 48 47 48 55 65 Medium back model Aluminium grey base Cat. A fabrics - set of 2 5 351 008 + fab. A + SB OP 421 Unit price 210.50 Chrome base (allow 5-6 weeks for delivery) Cat. A fabrics - set of 2 5 351 008 + fab. A + SQ OP 502 (allow 5-6 weeks for delivery) Unit price 251 / standards 3 9001 14001 CORRECTED- GRAIN LEATHER (KIPSKIN) 1 cat. A fabric colour (+ fab. A) FA Celestial black 28 choices of fabrics on request (allow 5-6 weeks for delivery). Shades and codes: see pages 346-347 Cat. B fabrics: + 21 premium on the standard pricing of cat. A fabrics Cat. C fabrics: not available
334 Seating / Inventiv > 4 models of chair choose from > Legs: Tubular steel ø 22 mm base, white SP epoxy coating (depending on the model), black SG (depending on the model) or aluminium grey SB from sck and chrome SQ on request. 4 black injection-moulded polyamide anti-slip glides > Available in 4 leg base, cantilever or casr-mounted 4 leg base (only available in an aluminium SB finish) > Seat description: Polyester foam padding glued the structure. Polypropylene shell, available in a black or white finish. > Backrest description: Fabric backrest: polyester foam padding glued the structure. Injection-moulded polypropylene shell available in a black or white finish. Mesh backrest in a black or coloured finish. Polypropylene shell, available in a black or white finish. Casr-mounted model 4 leg base Fabric model shell without arms Aluminium base* 5 616 008 + fab. A + SB 140 White shell without arms Aluminium base* 5 616 005 + fab. A + SB 140 Mesh backrest model shell without arms Aluminium base* 5 616 057 + fab. A + SB + mesh 140 *on request / Standards 3 4 legs with and without arms 6 5 3 Cantilever without arms 4 legs with writing shelf 35 choices of fabrics on request (allow 4 6 weeks for delivery). Shades and codes: see pages 346-347. Cat. B fabrics: + 4 premium on the standard pricing of cat. A fabrics Cat. C fabrics: + 17 premium on the standard pricing of cat. A fabrics 4 choices of cat. A fabric/ simulated leather colour (+ fab. A) 1 cat. B fabric colour 4 choices of finish for base 2 choices of polypropylene colour 4 choices of mesh colour (+ mesh) KP FG FA YA UO SP SB SG SQ PA PD UH IB UG IE Aubergine Srm grey Celestial black simulated leather Prairie green White* Aluminium grey *depending on the models Chrome On request (allow 4 weeks) White On request (allow 4 weeks) White Grey Red On request (allow 4 weeks)
335 Mesh backrest models Cantilever shell without arms Aluminium base 5 616 054 + fab. A + SB + mesh 149 White base* 5 616 054 + fab. A + SP + mesh 149 base* 5 616 054 + fab. A + SG + mesh 140 Chrome base* 5 616 054 + fab. A + SQ + mesh 166 4 legs shell without arms Aluminium base 5 616 009 + fab. A + SB + mesh 115 base 5 616 009 + fab. A + SG + mesh 106 White base* 5 616 009 + fab. A + SP + mesh 115 Chrome base* 5 616 009 + fab. A + SQ + mesh 132 shell designer arms Aluminium base 5 616 055 + fab. A + SB + mesh 157 base* 5 616 055 + fab. A + SG + mesh 149 Chrome base* 5 616 055 + fab. A + SQ + mesh 174 shell standard arms and writing shelf on right side base* 5 616 052 + fab. A + SG + mesh 183 Aluminium base* 5 616 052 + fab. A + SB + mesh 191 Chrome base* 5 616 052 + fab. A + SQ + mesh 208 White shell without arms White base 5 616 001 FA or KP + SP+ IB 115 base* 5 616 001 + fab. A + SG + mesh 106 Aluminium base* 5 616 001 + fab. A + SB + mesh 115 Chrome base* 5 616 001 + fab. A + SQ + mesh 132 *on request
336 Seating / Inventiv Polypropylene backrest models 4 legs shell without arms Aluminium base 5 616 009 + fab. A + SB PA 106 base 5 616 009 + fab. A + SG PA 98 White base* 5 616 009 + fab. A + SP PA 106 Chrome base* 5 616 009 + fab. A + SQ PA 123 shell designer arms base* 5 616 055 + fab. A + SG PA 140 Aluminium base* 5 616 055 + fab. A + SB PA 149 Chrome base* 5 616 055 + fab. A + SQ PA 166 shell standard arms and writing shelf on right side base* 5 616 052 + fab. A + SG PA 174 Aluminium base* 5 616 052 + fab. A + SB PA 183 Chrome base* 5 616 052 + fab. A + SQ PA 200 35 choices of fabrics on request (allow 4 6 weeks for delivery). Shades and codes: see pages 346-347. White shell without arms White base* 5 616 001 + fab. A + SP PD 106 base* 5 616 001 + fab. A + SG PD 98 Aluminium base* 5 616 001 + fab. A + SB PD 106 Chrome base* 5 616 001 + fab. A + SQ PD 123 Cat. B fabrics: + 4 premium on the *on request standard pricing of cat. A fabrics 2 choices of 4 choices of mesh colour polypropylene colour (+ mesh) 4 choices of cat. A fabric/ simulated leather colour (+ fab. A) 1 cat. B fabric colour 4 choices of finish for base KP FG FA YA UO SP SB SG SQ PA PD UH IB UG IE Aubergine Srm grey Celestial black simulated leather Prairie green White* Aluminium grey *depending on the models Chrome On request (allow 4 weeks) White On request (allow 4 weeks) White Grey Red On request (allow 4 weeks)
337 Fabric backrest models Cantilever shell without arms White base* 5 616 054 + fab. A + SP 149 base* 5 616 054 + fab. A + SG 140 Aluminium base* 5 616 054 + fab. A + SB 149 Chrome base* 5 616 054 + fab. A + SQ 166 4 legs shell without arms Aluminium base 5 616 007 + fab. A + SB 115 base 5 616 007 + fab. A + SG 106 White base* 5 616 007 + fab. A + SP 115 Chrome base* 5 616 007 + fab. A + SQ 132 shell designer arms base* 5 616 055 + fab. A + SG 149 Aluminium base* 5 616 055 + fab. A + SB 157 Chrome base* 5 616 055 + fab. A + SQ 174 shell standard arms and writing shelf on right side base* 5 616 044 + fab. A + SG 183 Aluminium base* 5 616 044 + fab. A + SB 191 Chrome base* 5 616 044 + fab. A + SQ 208 White shell without arms White base 5 616 006 FA SP 115 White base 5 616 006 KP SP 115 base* 5 616 006 + fab. A + SG 106 Aluminium base* 5 616 006 + fab. A + SB 115 Chrome base* 5 616 006 + fab. A + SQ 132 *on request
338 Seating / Evolutive Evolutive > 4 leg oval tubular steel frame > polypropylene shell > Protective non-slip glides 9001 Optional extras For the EVOLUTIVE range 5 Without arms 12 3 12 With arms > Set of 2 arms 10 Writing shelf models not stackable 35 34 48 47,5 FI FE FF FC FG FA 64 46 49 21 cat. A and B fabrics on request (allow 4 6 weeks for delivery). Shades and codes: see pages 346-347. 5 679 018 34 5 679 015 47 Evolutive Quality Plus With and without arms With arm + writing shelf 6 choices of cat. A fabric colour (+ fab. A) Bright red Royal bordeaux Cloud grey > Arms with writing shelf on right side Electric blue Srm grey 47 55 55 47 45,5 Celestial black 43 base Cat. A fabrics 5 680 001 + fab. A + SG 53 Cat. B fabrics 5 680 001 DU SG 59 Cat. A fabrics with mesh backrest 5 680 001 + fab. A + SG Ti 59 Cat. B fabrics with mesh backrest 5 680 001 DU SG Ti 65 simulated leather 5 680 001 YA SG 60 Wood shell 5 680 001 WP SG 64 Aluminium grey base Cat. A fabrics 5 680 001 + fab. A + SB 65 Cat. B fabrics 5 680 001 DU SB 72 simulated leather 5 680 001 YA SB 70 Chrome base Cat. A fabrics 5 680 001 + fab. A + SQ 65 simulated leather 5 680 001 YA SQ 70 Wood shell 5 680 001 WP SQ 77 1 mesh 1 simulated Cat. C fabrics: colour leather colour 1 wood finish not available TI YA WP FI FE FF FC FG FA DU > 4 leg oval tubular steel frame > Wooden seat and back structures > injection moulded polypropylene shell > Generous foam padding density and thickness (seat, backrest) > Straight backrest for improved back support base Cat. A fabrics 5 679 002 + fab. A + SG 68 Cat. B fabrics 5 679 002 + fab. B + SG 72 simulated leather 5 679 002 YA SG 76 Aluminium base Cat. A fabrics 5 679 002 + fab. A + SB 77 Cat. B fabrics 5 679 002 + fab. B + SB 81 simulated leather 5 679 002 YA SB 84 Chrome base simulated leather 5 679 002 YA SQ 92 DU YA 6 choices of cat. A fabric colour (+ fab. A) Bright red Royal bordeaux 1 cat. B fabric colour (+ fab. B) Cloud grey Electric blue 1 simulated leather colour Srm grey Plum Celestial black 21 cat. A and B fabrics on request (allow 4 6 weeks for delivery). Shades and codes: see pages 346-347. Cat. C fabrics: not available Beech plywood 1 cat. B fabric colour (+ fab. B) Plum Optional extras For the EVOLUTIVE QUALITY PLUS range (on request) > Set of 2 folding arms > Arm with anti-panic writing shelf on right side 5 679 028 34 5 679 029 55
339 Evolutive Deco > Oval shaped frame with 4 tubular steel legs in a black or chrome epoxy finish > Injection moulded polypropylene seat and backrest 47 33 46 47 41 55 41 base 5 681 002 + col. + SG 42 Chrome base (only available in black polypropylene) On request 5 681 002 PU SQ 45 12 3 choices of polypropylene colour (+ col.) PH PF PU Light grey Blue Optional extras For the EVOLUTIVE range. See p. 338 and 339 > Set of 2 black PVC adjustable connecr elements 5 679 027 5 5 679 022 156 > Trolley (12 chairs)
340 Seating / Training&Conference Altea Armchair Casr-mounted chair > 4 leg tubular steel base ø 22 mm > Fire-resistant chair on request (M4 foam and M1 cat. B fabric p. 346-347) 3 6 With and without arms 4 choices of cat. A fabrics (+fab. A) KP FE FG FA SB SG Aubergine Royal Bordeaux Srm grey Celestial black 34 choices of fabrics on request (allow 3 4 weeks for delivery) Shades and codes: see pages 346-347. 2 choices of finish for base Aluminium grey Trolley Cat. B fabrics: + 4 premium on the standard pricing of cat. A fabrics Cat. C fabrics: + 17 premium on the standard pricing of cat. A fabrics 32 47 32 49 55 56 45 45 45 52 45 45 51 44 Standard chairs base Cat. A fabrics from sck 5 591 067 + fab. A + SG 105 Fire-resistant model on request 5 591 066 + fab. B + SG 145 Aluminium grey base Cat. A fabrics from sck 5 591 067 + fab. A + SB 113 Fire-resistant model on request 5 591 066 + fab. B + SB 145 Armchairs base Cat. A fabrics from sck 5 591 068 + fab. A + SG 145 Aluminium grey base Cat. A fabrics from sck 5 591 068 + fab. A + SB 152 Casr-mounted chair Aluminium grey base Fabrics 5 591 063 FA SB 147 Optional extras Linking piece 5 591 005 (1 set of male/female connecrs) 14 Row spacing bar 5 591 003 27 Trolley (6 chairs) 5 591 004 108 Chair with writing shelf - Contact us for details Slim 37 31 43 50 42 56 49 Sold exclusively in pairs of the same colour > 4 leg tubular steel base > Incorporated handgrip for easy handling and compact design base Set of 2 Cat. A fabrics 5 486 002 + fab. A 145 Unit price 72.50 3 choices of cat. A fabric colour (+fab. A) Transport dolly 3 jaar 9001 5 FE Royal Bordeaux FC Electric blue FA Celestial black Transport dolly (5 chairs) 5 679 022 156 Sun 43 50 44 42 43 58 49 Sold exclusively in pairs of the same colour > 4 leg tubular steel base > mesh curved backrest Aluminium grey base Set of 2 Cat. A fabrics 5 487 002 + fab. A + SB 213 Unit price 106.50 20 choices of cat. B fabrics on request (allow 3 4 weeks for delivery). Shades and codes: see pages 346-347. Cat. B fabrics : + 22 premium per unit on the standard pricing of cat. A fabrics Cat. C fabrics : not available 3 9001 6 4 choices of cat. A fabric colour (+fab. A) TM Carmine red Blue TN TO Graphite grey Transport dolly (6 chairs) 5 679 022 156 (Pictured with Slim model here-above) TS
341 Integra Armchair Standard chair > Tubular steel ø 22 mm base with epoxy coating > 3 models choose from: wood, fabric upholstered or polypropylene > Standard chair or armchair (with arms) available Fabric chairs base Cat. A fabrics from sck 5 774 023 + fab. A + SG PU 111 Cat. B fire-resistant fabrics from sck 5 774 023 + fab. B + SG PU 115 Aluminium grey base Cat. A fabrics from sck 5 774 023 + fab. A + SB PU 115 Cat. B fire-resistant fabrics from sck 5 774 023 + fab. B + SB PU 119 Polypropylene chairs frame 5 774 013 + col. + SG 51 Aluminium grey base 5 774 013 + col. + SB 54 Polypropylene armchairs frame 5 774 024 + col. + SG 94 Aluminium grey base 5 774 024 + col. + SB 97 15 With or without armrests and writing shelf 6 choices of colour finish FC Electric blue FA Celestial black Cat. A fabrics (+fab. A) DO fireresistant Cat. B fabrics (+fab. B) PI PU WP SB SG Dark blue Beech plywood Polypropylene (+col.) Wood 2 choices of frame finish Aluminium grey Fire-resistant certified chair on request Aluminium grey base 5 774 012 PU SB 93 Wood chair Aluminium grey base 5 774 013 WP SB 122 35 choices of fabrics on request (3 4 weeks for delivery) Shades and codes: see pages 346-347 Cat. C fabrics : + 17 premium on the standard pricing of cat. A fabrics Optional extras > Writing shelf - attaches standard chair (stackable max. 15 with writing shelf) > Retractable armrest per unit 5 774 014 21 Short > Set of 5 linking pieces 5 774 017 31 > Row spacing bar Long (for chairs with armrests or writing shelf) 5 774 016 21 5 774 015 29 5 774 018 49 5 774 025 84 > Transport trolley (15 chairs)
342 Seating / Training&Conference Meeting > Polypropylene shell > Tubular steel ø 18 mm frame in a chrome finish > 2 models choose from: with or without linking piece Standard 5 432 004 + col. 28 With linking piece 5 432 003 + col. 31 Fire-resistant M2 linking piece 5 432 001 + col. 36 3 15 5 choices of colour finish (+ col.) PG PE PF PY PU Beige Bordeaux Blue Graphite grey Transport dolly (15 chairs) (pictured on p. 343) 5 679 022 156 Ono 36 45 42 > Tubular steel frame in an aluminium grey finish > Polypropylene seat and backrest > Stabilizing glides > Polypropylene arms in a graphite grey finish (for black and graphite grey chairs) or light grey (for all other colours) Standard chair 5 216 007 + col. 110 47 45 46 47 Armchair 5 216 006 + col. 127 68 36 47 46 58 42 22 7 With or without arms 5 choices of colour finish (+col.) PK PZ PF PY Beige Red Blue Graphite grey PU Transport dolly (7 chairs) (pictured on p. 343) 5 679 022 156 Pim s Sold exclusively in pairs of the same colour > Indoor/outdoor chairs > Polypropylene seat/backrest treated for protection against UVs > Tubular anodized aluminium frame > Outdoor table also available see p. 213 49 40 81,5 41,5 44 49 Set of 2 chairs 5 619 001 + col. + SB 162 Unit price 81 6 5 choices of colour finish (+col.) QW Taupe QB Aniseed green PZ QU Red Sky blue PU Transport dolly (6 chairs) (pictured on p. 343) 5 679 022 156
343 Feely 45,5 Integrated linking pieces 83 45 39 44,5 52 56 Sold exclusively in pairs of the same colour > Polypropylene seat/backrest > Tubular steel ø 11 mm frame in a chrome finish > Integrated linking pieces Set of 2 chairs 5 113 001 + col. 169 Unit price 84.50 10 5 choices of colour finish (+col.) QW QT PZ QS PU Taupe Green Red Dark blue Transport dolly Transport dolly (10 chairs) 5 679 022 156
344 Plius Seating / Training&Conference Sold exclusively in sets of 4 of the same colour > Tubular steel ø 22 mm frame with lacquered epoxy coating > Metal seat/backrest for black frame model > Foam padding seat/backrest with simulated leather for grey frame model frame Set of 4 chairs 5 810 003 SG SG 106 Unit price 26.50 Grey frame Set of 4 chairs 5 810 003 YA SD 127 Unit price 31.75 2 finishes Geo 3 5 choices of cat. A fabrics colour (+fab. A) FC FE FG Electric blue DO Royal Bordeaux Srm grey FA Celestial black 1 choice of cat. B fire-resistant fabric colour Plip YA Optional extras SGSG / black > Arm with integrated rotatable writing shelf YASD simulated leather/grey Sold exclusively in pairs of the same colour > Circular-section tubular steel ø 35 mm frame > polyurethane backrest shell > Incorporated handgrip for easy handling > Legs in a black or chrome finish frame Set of 2 chairs Cat. A fabrics from sck 5 282 001 + fab. A + SG 166 Unit price 83 Cat. B fire-resistant M1 from sck 5 282 001 DO SG 204 Unit price 102 Chrome frame Set of 2 chairs Cat. A fabrics on request 5 282 001 + fab. A + SQ 169 Unit price 84.50 simulated leather from sck 5 282 001 YA SQ 169 Unit price 84.50 > linking piece 5 379 006 SV 74 5 282 005 6 5 379 007 302 Sold exclusively in sets of 4 of the same colour > Rectangular-section tubular steel frame > Polypropylene seat/backrest > Less than 7 cm thick when folded > Legs in an aluminium grey finish > Transport trolley (12 chairs) on request Set of 4 chairs 5 809 005 + col. + SB 262 Unit price 65.50 Wall mount connecr for 4 chairs On request 5 809 006 SB 34 6 choices of polypropylene colour (+col.) QM Aniseed green Blue PF PY Graphite grey PT PZ QI White Red Orange On request