www.dauphin-group.com Lordo Real elasticity Office
2
Lordo An absolute top design with an innovative approach for supporting the back using a transparent, pressure-regulating fabric which is elastic over its entire area and a simple, self-aligning lumbar support. This is Lordo. 3 Design: Martin Ballendat
4 MS LO 33575 + Armrests 103
Lordo Swivel chair Transparent and comfortable MS LO 33575 + Armrests 072 MS LO 33575 + upholstery cushion in leather Lordo is an attractive chair whichever way you look at it. Its elastic, pressure-regulating backrest maintains its transparent and airy look at all times. What is so ingenious about Lordo is the clarity of its lines. It has an imposing appearance and yet is elastic and soft as soon as you sit back in it. This is all thanks to its lightfast and flexible woven fabric. The fabric is made of polyester and has Lycra threads specially woven into it, available in black or light grey. Lordo is also available with comfortable upholstery cushion. The cushion is available in black or coloured leather. 5
6
MS LO 33575 + Neckrest + Armrests 072 Lordo Swivel chair with neckrest Imposing and modern The woven backrest fabric consists of polyester and lightfast elastic Lycra threads and was specially developed for the Lordo chair. Thanks to this fabric, the backrest with its alternating black and transparent lines yields flexibly and adjusts to the user s body form whilst regulating pressure. The effect produced is similar to what would happen if a number of rubber bands were pulled tight one above the other and then connected together. With its high backrest, the Lordo executive chair offers a particularly high level of comfort. The neckrest area has the same elastic cushioning properties as the main backrest. This allows the back of your head to sink into it comfortably whilst remaining perfectly supported. 7
Lordo Swivel chair with comfortable upholstery pads Thanks to its area-elastic support material, with its upholstered pads Lordo offers optimum seated comfort in all work postures. Lordo features the Motionflex-Synchron mechanism with a rapid adjustment of the backrest counterpressure, a seat-depth adjustment of 6 cm and a seattilt adjustment up to -5 as standard. 8
9
Lordo Floating comfort 10
LO 33560 001 stackable LO 33560 001 + upholstery cushion in leather The Lordo cantilever and conference chair have also been created to match the Lordo swivel chairs. The backrests which were deliberately designed in accordance with the form-follows-function principle are harmoniously combined with a cylindrical armrest profile on a classic round tubular frame. The light and airy backrest appears to be floating, as the seat and backrest of the chair are not directly connected to each other. The elastic, transparent fabric emphasises this pleasant effect (alternatively available with upholstery cushion). The Lordo cantilever chair is available with an attractive, stackable frame. A smooth underseat shell protects the upholstery when a number of chairs are stacked one on top of the other. The conference swivel chair is height-adjustable and available with transparent stripe design mesh or with upholstery cushion, with glides or on castors. LO 33500 001 LO 33500 001 + upholstery cushion in leather 11
Lordo Options MS LO 33575 + Armrests 072 12
The woven backrest fabric consists of polyester and lightfast elastic Lycra threads and was specially developed for the Lordo chair. Thanks to this fabric, the backrest with its alternating black (optionally light grey) and transparent lines yields flexibly and adjusts to the user s body form whilst regulating pressure. The effect produced is similar to what would happen if a number of rubber bands were pulled tight one above the other and then connected together. The swing-mounted lordosis segment on the backrest features a separate tensioned cover. By tilting with respect to the backrest frame, it complements the elasticity of the fabric itself. As a result, this area adjusts optimally to the movements of the person sitting and has a mobilising effect on the lumbar spine. The segment ideally supports and harmonises with the elastic, pressure-regulating effect of the entire backrest. The backrest has a 10 cm height-adjustment range. The telescopic shanks on both sides of the backrest frame can easily be grasped from the seated position and are adjusted using attractive chrome buttons. The adjustment buttons on the backrest match those on the armrests perfectly from a design point of view. The armrests are height- and width-adjustable. The armrest pads are pleasently soft to the touch. The depth of the seat can also be adjusted while sitting, using a flat button located on the underside of the seat. The user can make the most of the large adjustment range (6 cm) because the seat is able to slide beneath the tensioned backrest cover. This makes it possible to reduce the seat area and select either a very large or very small seat depth. Users can therefore adjust the chair to suit their individual body size and preferred posture when sitting. The armrests 103 are made of polished die-cast aluminium and feature soft-touch armpads. 13
Lordo Technical features Tensioned elastic neckrest. Air-comfort backrest offering support for the back thanks to a tensioned elastic fabric which is breathable and regulates pressure. Tilting, self-aligning lumbar support, moves backwards and forwards in response to axial body movements. Armrests: height- (7 cm) and width-adjustable (each side 2.5 cm) with soft PU armpads Motionflex-Synchron mechanism: can be locked in 4 positions, seat-tilt adjustment up to 5 as standard Backrest height-adjustment feature (10 cm), can be operated in a sitting position using the buttons on either side. Side-mounted spring-force adjustment: rapid adjustment of the counterpressure with just a few turns while sitting Seat-depth adjustment: 6 cm by using a sliding seat which can be locked in 6 positions Infinite seat-height adjustment (40-51 cm) with safety gas unit Polished aluminium base (optional) with large, easy-run double castors (standard: plastic base). MS LO 33575 + Armrests 072 + Neckrest 14
Armrests Mesh 7 cm 2.5 cm Armrests 072 (2F, PU) Armrests 103 (fixed) Web K 4310 Black Transparent stripe design mesh Web K 4312 Light grey Transparent stripe design mesh Bases Leather cushion Base black plastic, with big castors (Ø 65 mm); standard Base polished aluminium, with big castors (Ø 65 mm); option Upholstered cushion covered with leather (black/coloured) 66336 Lordosis segment 66335 Middle backrest segment 66337 Neckrest segment Upholstered cushion covered with leather (black/coloured) 66338 Backrest segment MS LO 33575 52 MS LO 33575 072 MS LO 33575 103 45 51 52 45 51 52 52 45 51 MS LO 33575 072 + Neckrest 45 51 57 67 46 69 97 118 69 40 51 57 67 46 69 97 118 69 40 51 60 78 57 67 46 70 97 118 70 40 51 65 76 45 43 47 40 45 46 79 89 46 70 119 140 70 40 51 60 78 LO 33560 001 stackable LO 33500 001 45 58 88 61 43 67 46 70 87 95 70 15 41 49 66 74
Lordo www.dauphin-group.com Distribution: Dauphin HumanDesign Group GmbH & Co. KG Espanstraße 36 D 91238 Offenhausen Tel. +49 (0) 91 58-17- 7 00 E-Mail info@dauphin-group.com Manufacturer: Bürositzmöbelfabrik Friedrich-W. Dauphin GmbH & Co. or approved partner Espanstraße 29 D 91238 Offenhausen +49 (0) 91 58-17- 0 info@dauphin.de Dauphin HumanDesign Center international: Dauphin HumanDesign Australia Pty. Ltd. 2 Maas Street CROMER NSW 2099 / Australia +61 410 47 56 12 dirk.woywod@dauphin.com.au Your stockist Dauphin HumanDesign Group 10 187 01 04/13 34 Differences in colour, errors and modifications excepted.