ICF INSTRUCTION MANUAL H 1 Series Aluminum Sprinter Hightop Required Tools 1/2 Wrench Power Tool with Phillips head General Hardware/Accessories PART# DESCRIPTION 1 BAR 2 BAR 3 BAR 4 Bar ITEMs (not drawn to scale) SS-B016 5/16 X 1 1/4 CARRIAGE BOLT 4 8 12 16 SS-B018 5/16 X 1 3/4 Carriage bolt 1 2 4 5 SS-B201 1/2 PHILLIP TAP SCREWS` 4 8 12 16 SS-W008 5/16 X 3/4 WASHER 4 8 12 16 SS-N005 5/16 NYLON NUTS 4 8 12 16 N016 plastic knob 0 2 4 5 A02 Ladder Guide 0 1 2 2 A06 Ladder Stopper 0 1 2 3 a69 EZ velcro strap 0 1 2 3 A88 plastic bar guard 1 2 3 4 H11 DRIP RAIL CLAMP 2 X 8 2 4 6 8 H10 Upright Mounting base 16 2 4 6 8 A613-65 Cross Bar 65 1 2 3 4 rubber seat 2 4 6 8 1 Packaged by Date
Rubber Bar Guards for Aluminum Cross Bars - Press the Rubber Bar Guard into the channels of cross bars. - Use a solid object to press down if necessary ie. book, block or pipe. Rubber Seats for Upright Mounts - Slide the Rubber Seats onto th bottom of the Upright Mounts. - These prevent metal on metal contact for vehicles without a protective layer on their drip rail. EZ Velcro Strap How it works (Rear cross-bar) (Ladder) Insert rear cross-bar into opening of EZ-velcro straps. Slide strap around equipment the through steel ring. Pull EZ-velcro to secure via velcro. 2
For all vehicles secure the mounting place to the bottom holes of the upright mounts for a better grip. 3
N005 W008 +90 90 B201 B016 -Tightly secure hardware. -Upright mounting base will crimp the drip rail andangle outwards as hardware is tightened. Push the upright so it s 90 degrees then secure with tap screws. Ladder Stopper A02 (FRONT BAR) B018 N016 - Ladder Stopper can be installed in the front bar with tip facing the rear, allowing the ladder steps to fit in between. The bend of the Ladder Stopper prevent the ladder from rattling. Ladder Guide A06 B018 N016 (REAR or MIDDLE BAR) - Ladder Guide can be installed in the rear bar or middle bar to guide ladders down the system. 4
Accessories H1 S T E E L & A L U M I N U M A02 A06 Steel Cross Bar Plastic Bar Guards Part # Description Size Bar Type MSRP A02 Ladder Guide 5.5 1 X 2 14.95 A06 Ladder Stopper 5 1 X 2 15.95 Ladder Stopper and Guides prevent items from sliding forward and allows easy bungee and tie-down. Galvanized and dipped in rubber for durability. Easy turn knob allows quick adjustment and removal. Part # Description Height Bar Type Color MSRP A63 Push to Secure 6-8 1 X 2 Black or white $59.00 Secure your ladder with the Vantech push 2 secure system. Clamps onto cross bar with 2 X 1 with C clamps. Holds ladders 6-8 in height. Part # Description Length MSRP A42 Plastic Bar Guards 42 5.00 A50 Plastic Bar Guards 56 6.00 A88 Plastic Bar Guards 63 7.00 A89 Plastic Bar Guards 72 8.00 A41 Plastic Bar Guards 84 9.00 A60 Plastic Bar Guards 96 10.00 For Steel Systems Prevents scratch and damage to crossbars Aluminum Cross Bar Rubber Bar Guards Vantech 6 conduit carrier. Spring assist rear door for a water tight seal. Padlock tab for rear hatch door. A35 requires drilling into cross bars. A34 is a direct bolt-on if you have aluminum cross bars with built-in channels on top. Part # Description Length MSRP A51 Rubber Bar Guards 48" 12.00 A86 Rubber Bar Guards 65" 16.00 A52 Rubber Bar Guards 72" 18.00 A36 Rubber Bar Guards 84" 20.00 A85 Rubber Bar Guards 96" 22.00 Part # Description Length Capacity MSRP A69 EZ Velcro Strap 10 75 lbs 13.95 Strap a ladder with the EZ velcro straps. Holds up to a maximum of 75 lbs in combination with the ladder stopper or guide. Loops into cross bar up to 2 X 1. Part # Description Width Bar Type Color MSRP A35 A34 6 Conduit Carrier (drilling required) 6 Conduit Carrier (Slider bolt-on) 6 Universal Silver 89.00 6 Aluminum Channels Silver 89.00 Includes: Front cap, rear door, 2 U brackets and hardware. 6 PVC pipe not included. For aluminum systems with channels Prevents scratch and damage to crossbars Reduces windnoise if present Part # Description Length Color MSRP A81 Adjustable Extension Arm with 8 Convex Mirror 25-32 Black or White 79.00 Made from aluminum material. Bolts onto the eyehooks on the H series mounting base. No drilling is required. Extension arm can adjust in length and angle. Convex mirror is 8 wide stainless steel. Part # Description Width Bar Type Material Color MSRP A38 Wind Foil 24" 1 X 2 Aluminum Black / White 35.00 A39 Wind Foil 36" 1 X 2 Aluminum Black / White 36.00 A53 Wind Foil 48" 1 X 2 Aluminum Black / White 37.00 A54 Wind Foil 60" 1 X 2 Aluminum Black / White 40.00 A55 Wind Foil 63" 1 X 2 Aluminum Black / White 42.00 Reduces wind noise and vibration & still allows optional accessories for cross bar. 5 Part # Description Length Capacity MSRP Attach the Vantech Ratchet tie-down to the eyehooks on the mounting uprights with 1/2 bolts. A62 VR 500 Ratchet Tie-Down Installed onto eyehooks Sold as individuals 10 150 lbs 35.00