2015 PUSH BUMPERS PARTITIONS PRISONER SEATING FORD INTERCEPTOR SEDAN GORHINOPD.COM 888-980-4816
USH B PUSH BUMPERS The 5000 Road Defender push bumper series offers superior grille and bumper protection. Made from a fully welded one-piece construction with 4 gauge steel uprights. Upper cross bar made from 2 high-grade steel tubing. Cross plate for easy mounting of auxiliary lighting or additional equipment. Replaceable PVC trim. Will not interfere with SRS air bag system. PART NO. 5039 2 Center cross plate features pre-drilled holes for mounting of lights Sturdy steel uprights for maximum protection
LIGHT-READY LR SERIES PUSH BUMPERS The LR series push bumpers have all of the same great features and functions as the 5000 Series Road Defender and include holes and mounting points in the top cross bar to accomodate lights from the most popular brands. Available in 2 light and 4 light configurations. (Lights not included) Features a channel style light bar that allows for easy installation of lights. Custom cut-outs make it easy to install lights from the most popular brands 3 2 LIGHT PART NO. 5039-2L71 4 LIGHT PART NO. 5039-4L71 BRUSH GUARDS Brush guards can be added to customize the Go Rhino 5000 Series or LR Series Push Bumper. Optional brush guards are sold in pairs and offer additional protection from deer and other road hazards. The heavy duty brush guards are also designed to protect the vehicle during PIT manuevers. Constructed from 1 1/4 round high-grade steel tubing. STANDARD (LEFT) PART NO. 5039W HEAVY DUTY (ABOVE) PART NO. 5039WHD
PARTITIONS Preventing prisoners from harming law enforcement is the top priority for Go Rhino Public Safety. Partitions create a barrier in the vehicle, keeping prisoners contained in the rear of the vehicle. Available in 3 styles. Patented, easy-install mounting system. Quickest install in the industry. Optional lower panel kits allow complete separation between officer and prisoner at the bottom of the partition. Abrasion-resistant polycarbonate available for most part numbers. Installation Innovative design allows for easy installation. B-Pillar trim cutting is required. Bolt-on mounting brackets utilize existing hardware or holes in the vehicle. 50% Window - 50% Screen Partition Stationary window features a vinyl-coated 11 gauge expanded metal passenger section with a 1/4 clear polycarbonate driver section. PART NO. 5700FF 4 Full Window Partition Features a full clear polycarbonate window for complete closure. PART NO. 5700FW Sliding Window Partition Features a three piece 1/4 clear polycarbonate window with locking horizontal sliding center section. Optional screen also available to cover window opening. PART NO. 5700W OPTIONAL SCREEN PART NO. 5700SCR Brackets and Filler Panels This set of brackets and filler panels are required to fully install a partition into the vehicle. PART NO. 570811
ONS Each center panel & lower extension kit is custom made to fit each vehicle perfectly. CENTER PANEL & LOWER EXTENSION KITS Center panels & lower extensions allow complete separation of the front & rear areas of the vehicle. Lower extensions seal off the bottom of the partition so that prisoners will not be able to reach the front seat underneath the partition. Flat Center Panel & Lower Extension Kit The Flat Center Panel is a great way to close off the center of the partition with a sleek look that does not protrude into the back seat. PART NO. 5700FTF Recessed Center Panel & Lower Extension Kit Recessed Center Panel- The Recessed Center Panel provides more room in between the front seats to allow the installation of a gun rack. PART NO. 5700FTR 5 DUAL GUN RACK Gun racks from Go Rhino Public Safety offer the best way to secure firearms inside vehicles. The built-in shotgun trigger guard prevents any accidental discharges. Works in conjunction with any Go Rhino Public Safety partition with a Recessed Center Panel. PART NO. 58000 Built-In Trigger Guard Gun locks, tactical flashlights, and flashlight holders are not included.
PRISONER SEATING Go Rhino & AEDEC have teamed up to produce the safest prisoner seating system on the market today. Available in 2 different seat belting options: Factory or Center Belting System. (See page 7 for more details) Molded seating is constructed from TPO, one of the toughest, durable & most comfortable plastics on the market today. Trunk close-out panel comes standard with molded seats. Ultra-resilient and resistant to chemicals, UV rays, cracking or becoming brittle. Seat belts meet all SAE and FMVSS standards with patented Pro-Straint grip handles that tighten belts quickly & easily. Sleek form fitting trim lines do not require any fillers, gaskets or spacers. AEDEC s innovative & patented recessed prisoner arm cavity design makes for a more comfortable ride for prisoners. Low profile design maximizes head and leg room, allowing officers to get prisoners in and out easier. Patented recessed prisoner arm-restraining channels Two different belting system options 6 Perfect fit: No gaps or spaces to hide contraband Low profile allows for easier entering and exiting
R SEAT SEAT BELT SYSTEMS The Factory Belting System option utilizes existing seat belt locations while the innovative Center Belting System option allows the officer to belt in prisoners without reaching across their body. 7 Center Belting System Belts conveniently hang and buckle on the outside edges of the prisoner seat. PRO-STRAINT HANDLE Simply pull on the Pro-Straint handle to quickly tighten the seat belts and keep the prisoner restrained. Factory Belting System Belts buckle in the middle of the seat and utilizes the vehicle s normal seat belt setup. STEEL CLOSEOUT PANEL Upgrades the standard panel to a steel panel for extra toughness and durability. PART NO. 5MLP02-015
PUSH BUMPERS PAGE 2 2 Light LR Series Push Bumper Federal Signal IPX6 Code 3 Chase Whelen ION Soundoff Signal nforce 13-15 5039-2L71 5039-2L81 5039-2L61 5039-2L51 5000 Series Push Bumper 13-15 5039 4 Light LR Series Push Bumper Federal Signal IPX6 Code 3 Chase Whelen ION Soundoff Signal nforce 13-15 5039-4L71 5039-4L81 5039-4L61 5039-4L51 Brush Guard Type Standard Dual Coated Heavy Duty Part Number 5039W 5039WD 5039WHD PARTITIONS PAGE 4 8 Vehicle Type Mounting Brackets & Filler Panels Partition Window Type Optional Center Panel & Lower Extension Kits 50/50 Full Sliding Recessed Panel Flat Panel 13-15 SCA Vehicle 570811 5700FF* 5700FW* 5700W* 5700FTR 5700FTF Dual Gun Rack 58000 *To order abrasion-resistant polycarbonate, add A to the end of the part number. PRISONER SEATING PAGE 6 Molded Seating Factory Belting System Center Belting System 13-15 5CARFI121020 5CARFI121220 Prisoner Seating Accessories Steel Closeout Panel Upgrade 5MLP02-015 Distributed by: For more accessories and information, visit GORHINOPD.COM Part # EX0161