Contactors & Starters Index

Similar documents
28.1. NEMA Contactors and Starters. Contents. Contactors Non-Reversing and Reversing. Freedom Series. Product Description

E C N A A F -

Overload Relay Heater Tables

Motor Control. Contactors C 25 D N A 2 15 A A CATALOG SELECTION. Definite Purpose Contactors Catalog Numbering System. Contactors

SECTION MOTOR CONTROL

Variable Frequency AC Motor Drive Units

Multi-Pak Group Control

NEMA Control. Contactors & Starters Index

ECN A A A - B - C - D - E - F - A - B - C - D - E - F - NEMA Size 5 - Size Size Size Size Size 9

Magnetic Overload Relays

Open, NEMA Type 1, 3R, 4/4X and 12. Auxiliary Contacts

4.4. Definite Purpose Contactors and Starters A Starters A27, B27. NEMA Type 1 Enclosed Control

L2 FWD REV L1 L2 L1 L2 L3 FWD REV (L.H. UNIT) (R.H. UNIT) HIGH LOW HIGH LOW

Open & enclosed. Spec Tech Industrial 203 Vest Ave. Valley Park, MO Phone: 888 SPECTECH. Reduced voltage starters. Overload relay protection

4.2. Definite Purpose Contactors and Starters. Contents A, Two-, Three- and Four-Pole C25. Contactors

Enclosures. See Section Typical Description

Instructions for A200, A210, A250 size 6, two- or three-pole non-reversing or reversing motor controllers

3. Coils shall be of molded construction

AC Relays. Type IC5182. Ordering Information. Control Power Requirements. Contact Ratings (Amperes)

NEMA Contactors and Starters

R1000 Series Relays. Features and Benefits. Enclosed Relay Contacts Delivers maximum durability and extends life; inhibits corrosion and dust build-up

Machine Tool Industrial Control Transformers

NEMA Contactors & Starters (Freedom)

3.1. NEMA Manual Starters. Contents Description Types B230, B330, Switches... MS Series, Single-Phase Starters...

Industrial Control Transformers

NEMA Full Voltage Power Devices. Section 1. Control Catalog 1-1

IEC Utilization Categories (Explanation)

NEMA Vacuum Break Contactors and Starters

SECTION MOTORS & MOTOR CONTROLLERS

AF40... AF96 3-pole contactors Technical data

Softstarters Type PSS. Softstarters. General information

ICT TRANSFORMERS. Industrial Control Transformers provide a low and safe control voltage for the operation of many electromagnetic devices

NEMA Contactors and Starters

.1 NM ontactors and Starters Product Overview starters and contactors feature a compact, space-saving design, using state-of-the-art technology and th

A. Products shall be designed, manufactured, tested, and installed in compliance with the following standards:

9070T150D1 Industrial Control Transformer, 150VA

Contactors & Starters. Definite Purpose. Definite Purpose Contactors & Starters C-1. Contents

NMC Combination Line Starters and Enclosures

Definite Purpose Contactors and Starters

Starters + Enclosed Product

GE 8000-Line Motor Control Centers Mains, Feeders, Incoming Lines C-1

TYPE LS-K CONTACTORS TECHNICAL SPECIFICATIONS

Control Transformers

NEMA Contactors & Starters A200

Hazardous Factory Sealed Control Devices

6.1. Pump Panels EC N B A A - Industrial Pump Panels. Catalog Number Selection. Pump Panel. Design N = Freedom 2 = A200 V = Vacuum

A200 NEMA Contactors and Starters A200

Definite Purpose Contactors and Starters

Ktec Contactors and thermal overloads

Product Selection 3-Pole Contactors

TRI-SERVICE ELECTRICAL WORKING GROUP (TSEWG) 03/05/09 TSEWG TP-11: UFC N BEST PRACTICES

ECET 211 Electric Machines & Controls Lecture 6 Contactors and Motor Starters. Lecture 6 Contactors and Motor Starters

Programmable Logic Controller. Mat Nor Mohamad

The Enclosed Altistart 22 Soft Start/Soft Stop Motor Controller

Coil Data Nominal Current MA Nominal VA Sealed Single Pole Normally Open (SPNO) White Rodgers Q

Accessories - Field Installable

REVISIONS App PC. App Sud. App Thom TC 2014/03/25

CI-TI Contactors and motor starters Types CI 61 - CI 98

TABLE OF CONTENTS. Description Page Description Page. SETI Finland. Approvals:

SECTION PANELBOARDS

[V] Common Control Transformer Control (See page 1-78 Note)

TA Ta VA CTRL-XFRMR

Definite Purpose Contactors Types DP, DPA, and SYD Class 8910

Horizontal Circuit Switchers

June 2005 CN35 Electrically Held Vol. 2, Ref. No. [0494]

Horizontal Circuit Switchers

Enclosed Full-Voltage Starters

Bussmann series Quik-Spec Power Module Switch elevator disconnect

NEMA Pump Controls. Class 82 slim line NEMA pump controller for the agricultural industry

Comfort. Rugged Motor and Dynamically Balanced Fan provides a high volume of hot air.

Enclosed Full-Voltage Starters

CIRCUIT BREAKERS. Explosionproof Circuit Breaker Enclosures EXPLOSIONPROOF MOTOR CONTROL EXPLOSIONPRROOF MOTOR CONTROL BREAKERS ENCLOSURES

Micro Contactor MA Series

Well-Guard Control. Pumping Plant Panels. Catalog 8940CT9701R11/ Class 8940

User s Manual. ACH550-CC/CD Packaged Drive with Classic Bypass Supplement for ACH550-UH HVAC User s Manual

Definite Purpose Contactors and Starters

AF / AF12Z pole Contactors AC / DC Operated - with Screw Terminals

Definite Purpose Contactors and Starters

4 - Miniature controls

WARREN COUNTY, N.Y. M/E REFERENCE

and Refrigeration Institute). CNX Special Purpose Contactors

MOTOR TERMINAL CONNECTIONS

Instruction Bulletin. Enclosed ALTISTART 46 Controller Supplemental Instruction Bulletin Class 8638 and 8639 INTRODUCTION

Move to modern enclosed disconnect switch technology. Enclosed disconnect switches eot Manual motor controllers

Sprecher + Schuh s broad line of IEC/UL HP rated contactors can be purchased pre-installed in a variety of standard enclosures. Cataloged enclosures

AF series contactors (9 2650)

A. This Section includes ac, enclosed controllers rated 600 V and less, of the following types:

WARREN COUNTY, N.Y. M/E REFERENCE A. Submit manufacturer's product data on all motors and adjustable speed drives.

Type FEC Epoxy Encapsulated, Copper-Wound Industrial Control Transformers

DNH INDUSTRIES ***** COMPACT ***** EASY TO INSTALL ***** STATUS INDICATORS ***** DUAL LINE FUSING ***** INSULATED FRONT COVER ***** ADJUSTABLE OUTPUT

1. The term "withstand" means "the unit will remain in place without separation of any parts from the device when subjected to the seismic forces.

Data Bulletin. Ground-Censor Ground-Fault Protection System Type GC Class 931

Application Description

MAGNETIC MOTOR STARTERS

6.1. Pump Panels EC N B A A - Industrial Pump Panels. Catalog Number Selection. Pump Panel. Design N = Freedom 2 = A200 V = Vacuum

AF09... AF30 3-pole Contactors up to 25 HP / 600 VAC

User s Manual. ACS550-CC Packaged Drive with Bypass Supplement for ACS550-01/U1 Drives User s Manual

D I D /240 I. D x /240 I D / x x /24 I. D x /120

EDS / EFS Series Control Stations

Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON

Transcription:

ontactors & Starters Index NEMA ontrol Description Page Number General Information - HP... A Magnetic ontactors - HP...4 A Magnetic Reversing ontactors - HP... 4 A Magnetic Starters - HP... A Magnetic Reversing Starters - HP... A Magnetic ombination Starters - HP... 6 Modifications and Parts... Modification and Spare Parts... 8 Numbering System... Engineering Data... For HP Overload Heaters see SectionB Index

HP - NEMA ontrol General Information The Joslyn lark NEMA Starter That Saves You Money NEMA Type Enclosed Non - Reversing Starter NEMA Type Enclosed Reversing Starter 8 NEMA Type Enclosed ombination Starters Duplex Pump ontroller

General Information NEMA ontrol - HP Quality with economy of cost and space The Joslyn lark HP Motor Starter has been developed through many generations of controllers. losely related to the TM design, the HP starter is rated for its horsepower capability as well as in standard NEMA frame sizes. Like the TM starter, our HP starter was designed in one piece as a starter, a single integrated unit consisting of a power contactor and a thermal overload relay mounted on a rigid common base. This compact starter takes less than sq. in. of panel space, permitting the use of smaller, less costly enclosures. It provides more wiring space for easy wiring and requires only two mounting screws to save installation time and cost NEMA sizes,, & are the same small physical size, providing greater flexibility. Quality NEMA s,,, & with economy of cost and space LOW ENERGY 8.4 VA OIL OVER NAME PLATE Same energy efficient coil for NEMA sizes,, &. Reduces transformer size and cost. Small transformer size saves panel space. Low VA inrush coil reduces line disturbance, ideal for use with solid state control. lear and easy to identify size, rating, and catalog number. AUXILIARY ONTATS Easy to install lear side cover One Kit may be attached to each side of the starter providing up to four contacts TRUE "UP-FRONT" "STRAIGHT THROUGH" WIRING DESIGN Makes the HP Starter easy to wire and safe to trace. Save through reduced wiring time and panel cost. ontacts positive driven from main contact carrier ontact Kits - One N.O. KHP - M Two N.O. KHP - M N.O. & N.. KHP - M 4 8 SMALL SIZE Requires only sq. in. of panel space. "UNIQUE" SPRING LOAD TERMINALS For fast load connection. Save by reducing starter wiring time.

HP - NEMA ontrol A ontactors -Pole, Single Phase NEMA Reversing ontactors - Type HPR -Pole, Three Phase Maximum Motor Horsepower NEMA V V 46/ V Maximum Motor Horsepower V / -Pole, Three Phase / / / / ontinuous ontin- Ampere 46- V V V / / / / / HPOU HPAA HPRAO Non-Reversing ontactors - Type HP V 8 4 8 4 ontinuous Ampere 8 4 Tungs Lamp Load NEMA Type General Purpose atalog No. HPA HPA HPA HPA HPA HPA HPA HPA NEMA Type General Purpose atalog No. HPRA HPRA HPRA HPRA 88. 66. 8.. $4. 6. 6. 66. 4. 86. 6. 66. NEMA Type 4 Watertight atalog No. atalog No. atalog No. HPW $ 6. HPT $ 4. HPU $ 8. HPW 66. HPT 84. HPU. HPW 664. HPT 4. HPU 8. HPW 6. HPT 8. HPU. HPW HPW HPW HPW NEMA Type 4 Watertight atalog No HPRW HPRW HPRW HPRW 86. 66. 6. 6. 6.. 48. 484. NEMA Type Industrial - Dust-tight HPT HPT HPT HPT 64. 44. 46. 846. NEMA Type Industrial - Dust-tight atalog No. HPRT 8. HPRT 6. HPRT 8. HPRT 88. Open Type HPU HPU HPU HPU Open Type atalog No. HPRU HPRU HPRU HPRU. 6.. 4. 4. 648. 8. 8. Note:. includes contactor complete with one N.O. contol-circuit contact. Ordering Information Use complete catalog number. Replace the () with the suffix from coil table. Engineering Data pages - Modification pages -8. includes contactor complete with N.O. interlock on each contactor. All contactors are mechanically and electrically interlocked. oil Table 6Hz Voltage 4 Separate ontrol Separate ontrol Suffix -6-6 6Hz Voltage -4 44-48 -6 Suffix -6-66 -46-6 4 4 Discount Schedule J

A Starters NEMA ontrol - HP HPUO HPAA HPRUO Non-Reversing Starter Type HP -Pole, Single Phase NEMA Maximum Motor Horsepower / -Pole, Three Phase 46/ V V V 46/ V V V / / / / (Requires Overload Heater) ontinuous Ampere 8 NEMA Type General Purpose atalog No. HPAA HPAA HPAA (Requires Overload Heaters) 8 4 HPAA HPAA HPAA HPAA 86.. 4. 6. NEMA Type 4 Watertight atalog No. $ 86. HPWA 8. HPWA 66. HPWA HPWA HPWA HPWA HPWA atalog No. atalog No. $ 68. HPTA $ 6. HPU $ 6. 6. HPTA 46. HPU 4. 8. HPTA 44. HPU 4. 68. 684. 4. 8. NEMA Type Industrial - Dust-tight HPTA HPTA HPTA HPTA 6. 46.. 8. Open Type HPU HPU HPU HPU 6. 8. 6. 64. Reversing Starters - Type HPR -Pole, Three Phase NEMA Maximum Motor Horsepower 46/ V V V / / / / (Requires Overload Heaters) ontinuous Ampere 8 4 NEMA Type General Purpose atalog No. HPRAA HPRAA HPRAA HPRAA $ 6. 86. 6. 64. NEMA Type 4 Watertight atalog No. HPRWA HPRWA HPRWA HPRWA $ 4. 8. 6 66. NEMA Type Industrial - Dust-tight Open Type atalog No. atalog No. HPRTA $ 88. HPRU $ 64. HPRTA. HPRU 8. HPRTA 66. HPRU 84. HPRTA. HPRU 48. Note:. includes starter complete with N.O. interlock and overload relay less heaters.. includes starter complete with N.O. interlock on each contactor and overload relay less heaters. All starters are mechanically and electrically interlocked.. NEMA R add 6. to NEMA List Ordering Information Use complete catalog number. Replace the () with the suffix from oil Table. Order heater elements at $8 each from Section B Engineering Data page - Modification page -8 Spare Parts 8 oil Table 6Hz Voltage 4 Separate ontrol Separate ontrol Suffix -6-6 6Hz Voltage -4 44-48 -6 Suffix -6-66 -46-6 Discount Schedule J

HP - NEMA ontrol A ombination Starters HPSAA6 Non-Fusible Disconnect Switch - Type HPS HPSAA6 NEMA Maximum Motor Horsepower V V 46/V / / / / Starter Ampere 8 4 Disconnect Ampere 6 NEMA Type General Purpose Enclosure atalog No. HPSAA6 HPSAA6 HPSAA6 HPSAA6 $ 86. 84.. 8. NEMA Type R Raintight atalog No. HPSRA6 HPSRA6 HPSRA6 HPSRA6 $ 8. 4.. 68. Fusible Disconnect ( & Volts) Max. Motor Horsepower Disconnect Ampere Dual Element Non-Time Starter NEMA Fuse Delay Fuses Ampere Fuse V V V V Switch lips / / / / / 8 / / / 6 4 6 6 Fusible Disconnect (46 & Volts) NEMA.. 46V V 46V V / / Starter Ampere 8 4 4 Disconnect Ampere Switch 6 6 Notes: Motor Full load must not exceed starter continuous ampere rating. s includes starter complete with N.O. interlock, disconnect switch less fuses, and -phase overload relay less heaters. Fuse lips 6 6 NEMA Type General Purpose Enclosure atalog No. HPSAA HPSAA HPSAA HPSAA6 HPSAA6 $ 84. 4... 44. NEMA Type General Purpose Enclosure NEMA Type R Raintight atalog No. HPSRA HPSRA HPSRA HPSRA6 HPSRA6 NEMA Type R Raintight atalog No. atalog No. HPSAA6 $ 88. HPSRA6 $ 6. HPSAA6. HPSRA6. HPSAA6. HPSRA6. HPSAA66. HPSRA66. HPSAA6 44. HPSRA6. HPSAA66 4 HPSRA66 4.. For other Enclosure Types consult factory. $ 44. 4. 8.. 4. 6 Ordering Information Use complete catalog number. Replace the () with the suffix from coil table. Order heater elements at $8 each from Section page B Engineering Data pages -4 Modification pages -8 oil Table 6hz Voltage Suffix 4 Separate ontrol -6 Separate ontrol -6 6Hz Voltage -4 44-48 -6 Suffix -6-66 -46-6 6 Discount Schedule J

Modifications and Parts NEMA ontrol - HP Modifications Description over ontrols Factory Installation Addition - hange atalog No. as outlined on Page. For Bulletin Type HP Enclosure Type Number 4 & For Field Installation Kit atalog Number Kits Only For Type Enclosures Over Load Reset Hole plug for Internal Reset ( per pack) Reset Button (one reset per kit) Push Buttons & Selector Switches Start-Stop Push Buttons Hand-Off Auto Selector Switch Forward-Reverse-Stop Selector Switch Forward-Reverse-Stop Push Button Pilot Lights Without Electrical Interlocks, Standard Transformer Type, with Red Lens. Push Buttons & Selector Switches Start-Stop Buttons Hand-Off-Auto Selector Switch Pilot Lights Without Electrical Interlocks, Standard Transformer Type, with Red Lens. V 4V 48V 6V V 4V 48V 6, 6 & 68 6 & 6 68 6, 6, 6, & 6, 6, 6, & 68,, &,, & N/ $ 6. 6. 6. 48..... 6. 8. $ N/ 64. 64. 64. 48..... --- --- KTM-6 KHP-E A6-64 KHP-4 KHP-8 KHP-8 KTM-8 KTM-4 KTM- KTM-6 KTM- KTM- KTM- KTM-4 KTM- KTM-6 $ 48. 8. 6. 6. 6. 6.. 66. 66. 66. 66. 6. 6.... ontrol ircuit Auxillary ontacts Extra N.O. ontact Extra N.O. and N.. ontacts Two extra N.O. ontacts Enclosure Kits All 6 & 6 All. 8. 8.. 8. 8. KHP-M KHP-M KHP-M Same as type TM, see Section B 6... Power ircuit - For HPS ombination Starters 8 6 Fuse lips-kit includes 6 clips and mounting screws, without base for lower clips. Description Base Amp. Volts 6 Amp. Volts Amp. 6 Volts 6 Amp. 6 Volts Fuse lass R R R R Switch Amp. For Bulletin Number Type HP & 6 68 - atalog No. A6-4- A6-4- A6-46- A6-484- $ 48. 48... Note:. Kits may be changed in the field from -position to -position operation. In addition to HAND-OFF-AUTO, four labels are included, marked FORWARD-OFF-REVERSE: HIGH-OFF-LOW, TEST-LAG-LEAD, ON-OFF.. Lower Mounting Base for Fuse lips- required only when converting a non-fusable unit to a fusable unit. Discount Schedule J

HP - NEMA ontrol Modification and Parts Modifications Factory Installed Addition For Bulletin Number Type HP Description ontrol Transformer - Includes Single Fused Volt Secondary Add to NEMA Type, 4 & For Field Installtion Kit atalog Number Enclosure Type Only Discount Schedule J Standard apacity Extra apacity Miscellaneous VA apacity Primary Voltage 8 4 & 48 6 8 4 & 48 6 Hertz 6 6 & 68-4. 6. KTR6-6 KTR6- KTR6- KTR6- KTR6- KTR6- $6. $64. Ambient ompensated Overload Relay Fused ontrol ircuit: Fuse Holder for one fuse Fuse Holder for two fuses All All - - 4. 64. KHP-F KHP-F $48.. Enclosure Adaptor Kits: Starter Mounting Plate Mtg. Plate with O/L Reset - Required with Enclosure Kit Transformer Mtg. Plate KHP-E KHP-E KTM-8 $4. 4. 4. Renewal Parts Replacement Overload Ambient ompensated Replacement Power ontact Kit - Forward Side - Reverser Reverse Side - Reverser Forward Side Reverser Reverse Side Reverser Discount Schedule J8 KHP- KHPA- KHP- KHP- KHPR-S KHPR- Notes: KHPR-S. Reversing Starters require -KHP-E and -KHP- KHPR- E with reset.. s include larger cabinets required for Bul. 6 & 6. Replacement oil Kits Discount Schedule J8. Includes one secondary fuse and Voltage Hertz Primary Fuse lips. - 8-4 44-48 -6 8 4 or 6 or 6 or 6 or 6 or 6 or 6 or 6,, & KTB4- KTB4- KTB4- KTB4-6 KTB4- KTB4-4 KTB4- $ - - $ 4. 6. 66. 6. 8. 8. 8. 8........ 8 6 8 Discount Schedule J & J8

NEMA A- Magnetic Starters NEMA ontrol - HP Type of ontactor or Starter HP HP HPR HPR HPS - ontactor - Starter - Reversing ontactor - Reversing Starter - ombination Starter with Switch NEMA - - - - Enclosure Type A - NEMA B - NEMA R - NEMA R P - NEMA 4- Painted Steel W - NEMA 4-Stainless Steel T - NEMA U - Open Type Type W & T enclosures are not available with HPS combination starters. Use type TM for these applications. Number of Poles - Two Pole - Three Pole Fuse lip Fuse lip - ampere 6-6 ampere lass J Fuse lip - ampere 6-6 ampere lass R Fuse lip - ampere 6-6 ampere No number or - no clips Pilot Light L - Indicates a standard red pilot light. P - Indicates a "Push-To-Test" red transformer type pilot light with nameplates. No Letter - Pilot light not required. HPS A A 6 - T46 L M Indicates Quantity of Auxiliary ontacts 6 6 A - B - - E - F - O - over ontrol Bulletins 6, 68 & Reset button in cover for overloads. Reset button and Hand-Off- Auto selector switch. Reset button and Start-Stop push button. Selector switch no reset. Push button no reset. None (no reset button in cover) Bulletins 6 & 6 A - Reset button in cover for overloads. B - Reset button and Fwd.-Off- Rev. selector switch. - Reset button and Fwd.- Rev.-Stop push button. O - None (no reset button in cover) Indicates Type of Overload Relay A - Ambient compensated No Letter - Non Ambient compensated Disconnect - 4 Volts 4-48 Volts 6-6 Volts No number - No switch M = N.O. ontact M = N. O. ontacts M = N.O. N.. ontact Suffix Without Transformer oil Volts & Hertz -/ or 6-4/ or 6 44-48/ or 6-6/ or 6-8/ or 6 / or 6 4/ or 6 Suffix With Transformer (Secondary -V) Transformer Primary Volts & Hertz -4/ or 6 44-48/ or 6-6/ or 6-8/ or 6 Standard apacity - T6 - T46 - T6 - T86 Suffix Suffix - 6-6 - 46-6 - 86-66 - 6 Watt Extra apacity - 6-46 - 6-86

HP - NEMA ontrol Type HP NEMA s,, & Outline Drawings Engineering Data / /6 /8 /8 /4 6 / ontactor Type HP Reversing ontactor Type HPR Provision for #8/# screw (6) /8 /8 /6 / /6 /8 Starter Type HP Reversing Starters Type HPR Power Wiring Accommodations Wire Range Line Load Wire Type Pressure Terminal Type ontrol ircuit Provision for Ring Tongue Lugs A- Inductive Terminal Width in. Screw ontinuous Amperes Make Break # 4 - #8 #4 - #4 opper Pressure.4 # - 88VA 4VA (u) lamp Terminal Type Pressure Saddle opper Wire Max., #AWG Screw oil Burden Inrush Sealed #6-48VA 8.4VA Notes:. UL specifies only one () wire per lug.. One or two stranded copper wires of same size, or differing by two () gauge sizes.. oil terminal wire size is #4 AWG maximum.

Engineering Data NEMA ontrol - HP Approximate Dimensions In Inches Type HP NEMA s,, & Outline Drawings /8 D B /8 E A NEMA Type Enclosure NEMA Type 4 & Enclosures Starter Type HP & HP HPR & HPR NEMA Type Enclosure Without Transformer A B D E 6 /4 / 6 /4 /4 /8 / 6 /4 /4 NEMA Type 4 & Enclosure With Transformer Without Transformer With Transformer A B D E A B D E A B D E /8 / 6 /4 /4 /4 6 /8 / 4 /8 6 /8 / 6 /8 /8 6 /4 /4 /8 6 /8 / 6 6 /8 6 Type HPS NEMA s,, & Outline Drawings 8 6 NEMA Type Enclosure NEMA R-4& Enclosure

HP - NEMA ontrol Engineering Data Wiring Diagram Type HP - Non-ombination Starter ONTROL FUSE WHEN USED WIRE "A" "A" Pole, Three Phase Pole, Single Phase onnection For Pilot Devices over Mounted Pilot Devices Wire ontrol Remote Pilot Devices onnect To oil Terminals Automatic Reset Automatic reset operation should not be used with two wire control. Start-Stop Pushbutton Pilot Light Momentary ontact Pushbutton Position Selector Switch (Remove Lead from oil to Term No. ) Position Selector Switch (Remove Lead from oil to Term No. ) Two or More Momentary ontact Pushbutton Stations Separate ontrol Remove wire "A" when it is supplied. onnect separate control lines to the "" terminal on the pilot device and the "4" terminal on the starter.

Engineering Data NEMA ontrol - HP Wiring Diagram Type HPR - Non-ombination Starters Elementary Diagram ontactors "F" & "R" are Mechanically Interlocked Wiring Diagram Front View When Limit Switches are used, remove Jumpers "" & "D" and connect per dotted lines. Two Wire ontrol for Maintained Pushbuttons Three Wire ontrol for Momentary ontrol Pushbuttons Automatic Reset Automatic reset operation should not be used with two wire control. Separate ontrol Remove wire "A" when it is supplied. onnect separate control lines to the "" terminal on the pilot device and the "8" terminal on the starter. Pushbutton with Forward and Reverse Buttons Electrically Interlocked

HP - NEMA ontrol Engineering Data Wiring Diagram Type HPF - ombination Starter ontrol fuses when used Primary fuses when used J Without ontrol Transformer (Wiring Diagram - Front View) With ontrol Transformer (Wiring Diagram - Front View) onnection For Pilot Devices ON Position Selector Switch (Remove Lead from Aux. to Term No. ) START STOP OFF Start-Stop Pushbutton onnections for over Mounted or Remote Pilot Devices TWO WIRE ONTROL DEVIE Position Selector Switch (Remove Lead from Aux. to Term No. ) HAND START STOP OFF AUTO START STOP Two or More Momentary ontact Pushbutton Stations onnect to oil Terminals Push-To-Test Pilot Light Pilot Light Two Wire ontrol Device 4 Dual voltage transformer is shipped as shown connected for higher voltages. Reconnect jumpers "J" per table for lower voltage. Voltage onnect H to H H to H4 46 H to H All Single Primary Transformers L H H H L H4 H4 H Automatic Reset Automatic reset operation should not be used with two wire control. 4