PNEUMATIC CONVEYING SYSTEMS FOR PELLET & BIOMASS STORAGE SILOS CLEANING AND ASH-CLEANER

Similar documents
Flexible Silo. ACHBERG. flexible silo

4.7 Polymer Preparation and Dosing Systems Ultromat

SIMPLEX 2 DIMENSIONS TAB.1

TECHNICAL INFORMATION F25 AS LT3 12/2011 / B 1

PNEUMATIC TRANSPORT FOR SOLID FUELS Price list ADVANCE Easy Moving

TECHNICAL INFORMATION HXL 8015 S 11/2011 / 730-C 1

TECHNICAL INFORMATION HXL8018S-K 11/2012 / 733-B 1

Industrial vacuum cleaners

VACUUM CONVEYOR SYSTEM

LCP Cartridge Dust Collector

Industrial vacuum cleaners

AIR-T AIR-T AIR-T AIR-T

GBW22P. Main Features. Frequency Hz 50 Voltage V 400 Power factor cos ϕ 0.8 Phase and connection 3. Power Rating

Storage connection with 5 meter long rubber hose DN8, DILO coupling DN8, ball valve DN R050 and five different SF 6

Manual pneumatic operated valves for fixed installations, CO2 and inert gases. Series B0430

Plastics & Packaging ONE STOP SHOPPING. Canada USA

FOR ECONOMICAL DEDUSTING OF LOADERS, BUNKERS AND CONVEYOR BELTS

DOMESTIC LPG REGULATORS & ACCESSORIES MOVABLE TANKS TANK INSTALLATION CONNECTED WITH MANIFOLDS

Toll Free 1(800)

Dry Ice Blasting Unit

SIMPLEX BIG 2B PARTS WASHERS WITH ROTARY BASKET, PLC AND TOUCHSCREEN EQUIPMENT SIMPLEX BIG 2B

SMARTWOOD SRL Via Caduti sul don, Villar San Costanzo (CN) Tel

Fixed Asphalt Mixing Plant (120TPH) =====

MANUAL Con-Evator SVR-I

PI 1 Plug-in Injector

Bulk Material Handling System Integrator

Continuous level measuring system NB 3000 Selection list

About Pre-Separators. When a Pre-Separator is to be used the following should be considered: Pre-Separators should be used: Dustcontrol Pre-Separators

- all rights reserved

Vacuum Pumps. Oil-Lubricated Vacuum Pumps EVE-OG. Suction rate from 10 m³/h to 255 m³/h. Suitability for Industry-Specific Applications Schmalz -

DOCK & BARGE HOSE PRODUCTS

TECHNICAL INFORMATION

INFASTAUB. Breathe The Difference: Pure Air. INFA-JETRON Silo filter / Dust collector

CRS-D Powder Coating Booth with Reverse Jet Cleaning System

RAPIDMIX 400CW. Length of Machine (19.5m) Length when erected Width of Machine 9-10 (3.00 m) Width Same

More than 40 years' experience and quality you can rely on 2014/15. Heating systems

DRYRAPID. The versatile dry feed conveying system

Voltage 400V 3N 50Hz. L W H Weight Fans Surface. Air Flow [m 3 /h] Primary [m 2 ] Ø [mm]

Compact Vacuum Systems

AEROTECNICA FILTER AFCO

Horizontal And Vertical Centrifugal Pumps

AFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)

OIL BURNERS MAIOR P 45 AB. techniques for energy saving MODEL. HYDRAULIC SYSTEM 220/380 V 60 Hz LB

GBW22Y. Main Features Frequency Hz 50 Voltage V 230 Power factor cos ϕ 1 Phase and connection 1

GSW35Y. Main Features. Frequency Hz 50 Voltage V 400 Power factor cos ϕ 0.8 Phase and connection 3. Power Rating

1mm GALVANIZED PIPE SYSTEM

Mechanical and vacuum engineering. Kasseler Straße D Zierenberg. Telefon (56 (5606) 06) , o o.

MINI BLAST INTERNAL PIPE CLEANER

CORD-SETS. Diagram for flat cable cord-sets page 162. Diagram for round cable cord-sets page 163. Diagram for Cord-sets with Switch Item 310 page 164

FS Maximum savings when cleaning with extremely compact dimensions

SUCTION FILTRES. 3D drawings available at

RS MaxLiner System DN 70 - DN 400

Dry Ice Blasting Unit

aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Water Hoses

COMMERCIAL BOILERS Eco-HK / Eco-PK KW

TECHNICAL DESCRIPTION Rescue Rod s AIR DISPLACEMENT UNIT MODEL MEGAVAC LOADER 8000 EVO Wet & dry vacuum

where nature and technology meet FILTRATION Solutions for filtration applications PETROGAS GAS-SYSTEMS BV

FY 2019 FY 2020 FY 2021 Rate per Unit. Amount Unit. Amount Quantity

GSL30D. Main Features Frequency Hz 50 Voltage V 230 Power factor cos ϕ 0.8 Phase and connection 3

5 Compact Vacuum Systems. Compact Vacuum Systems

LCP Cartridge Dust Collector

Suspension tracks. Suspension tracks H 38. We put things in motion

GSW500DO. Main Features Frequency Hz 50 Voltage V 400 Power factor cos ϕ 0.8 Phase and connection 3

Continuous level measuring system NB 3000 Selection list. Overview

TECHNICAL INFORMATION

APPENDIX B FUNCTIONAL DESIGN SPECIFICATIONS (Sequence of Operation)

Terra TM 4300 B. PARTS LIST Advance model: (1)

Rietveld Equipment is the U.S. Distributor of ERME onion and garlic equipment.

ELLIPTICAL PUMP MODEL GAMMA 180

processing industry 1st choice for professionals worldwide

ACCESSORIES FOR BLOWERS

TECHNICAL INFORMATION

ITT FLYGT ORIGINAL O-RING/INTERMEDIATE SERVICE KITS

At Dyno we make the world of business go round. Up and down. And side to side.

HOPPER LOADER GS-4m/-10m Spare parts etc. Xenon beacon, 24 VDC, 30 ma Controller, ES-20, for -BV model. Suction motor, Lamb, 230 V AC, 1100W, 2-stage

METRIC VECO SYNCHRO BELTS Selection of Transmission / 6

m-csg Ultra-compact Clean Steam Generation System

General Accessories High Vaccuum units. Vaccuum units

TECHNICAL INFORMATION. performance max. cons. part cons. range load at max. ** load at part ** efficiency kw kw kg/h kw kg/h % Wood chip units:

TECHNICAL INFORMATION

Differential pressure sensor

DRAWING SET A M I SN L F S E

Combined pump and gripper Medium

Exhaust rail system 920, pneumatic system for vehicles in motion

5L Interface Unit. Australian Vacuum Systems TECHNICAL DATA SHEET. Australian Vacuum Systems. Unit 6/5 Vuko Place Warriewood, NSW 2102

GMS-015Y. Main Features Frequency Hz 50 Voltage V 400 Power factor cos ϕ 0.8 Phase and connection 3

Grease-lubricating pump FF... DSK US (05.05)

SIDE CHANNEL BLOWERS

> Vacuum Tubing 4040A...Standard, EPDM D...Reinforced EPDM T...High temperature, silicone...92

Multi-Stage Ejectors. Multi-Stage Ejectors SEM. Suction rate from 332 l/min to 2,370 l/min. Suitability for Industry-Specific Applications

LUBEMASTER Standard model. The Lubemaster OS600 Centrifugal Oil Filtration Unit standard model comes complete with :

Hot Air Devices for welding, heating, shaping of thermoplastic materials. Floor welding machine Nozzles Accessories

Dry Ice Blasting Unit

RAPIDMIX 600C CHASSIS

MAKE OF AUTOMOBILE: TYPE: V 70 PISTON DISPLACEMENT: 2521 NUMBER OF VALVES:

Solenoid valves "ENOVA" Series 2300

LCP Cartridge Dust Collector

HOPPER LOADER. Serie ITP. Serie ISP. Serie IPL. Serie IPL-P

REFCO Product Guide by Designation 2016

Committing to the future. The digital manifold testo 550, ideal for all measurement work on refrigeration systems and heat pumps

Transcription:

PNEUMATIC CONVEYING SYSTEMS FOR PELLET & BIOMASS STORAGE SILOS CLEANING AND ASH-CLEANER Price list 2016 V.01eng

PNEUMATIC CONVEYORS WX2 Pneumatic conveyor WX2 Accessories included: control panel with black-lit lcd display, cellulose filter, level sensor, product exhaust valve, alimentation schuko cable 2 mt, sensor alimentation cable 10 mt 1.610,00 WX5 Pneumatic conveyor WX5 Accessories included: control panel with black-lit lcd display, cellulose filter, level sensor, product exhaust valve, alimentation schuko cable 2 mt, sensor alimentation cable 10 mt 1.610,00 WX10 Pneumatic conveyor WX10 Accessories included: control panel with black-lit lcd display, cellulose filter, level sensor, product exhaust valve, alimentation schuko cable 2 mt, sensor alimentation cable 10 mt 1.660,00 WX10M Pneumatic conveyor WX10M (with motorized valve) Accessories included: control panel with black-lit lcd display, cellulose filter, level sensor, product exhaust valve, alimentation schuko cable 2 mt, sensor alimentation cable 10 mt 2.720,00 WX10C Pneumatic conveyor WX10C Accessories included: control panel with black-lit lcd display, cellulose filter, level sensor, product exhaust valve, alimentation schuko cable 2 mt, sensor alimentation cable 10 mt 1.810,00 WX15 Pneumatic conveyor WX15 Accessories included: control panel with black-lit lcd display, cellulose filter, level sensor, product exhaust valve, alimentation schuko cable 2 mt 1.800,00 WX52BFR Pneumatic conveyor WX52BFR Accessories included: electric panel installed on the motor base with black-lit lcd display, self-cleaning cartridge filter, level sensor, product exhaust valve, alimentation cable for discharge hopper 10 mt 5.800,00 WX52 Pneumatic conveyor WX52 Accessories included: electric panel installed on the motor base with black-lit lcd display, self-cleaning cartridge filter, level sensor, product exhaust valve, alimentation cable for discharge hopper 10 mt 5.280,00 WX52i Pneumatic conveyor WX52i Accessories included: electric panel installed on the motor base with black-lit lcd display, self-cleaning cartridge filter, level sensor, product exhaust valve, alimentation cable for discharge hopper 10 mt 5.660,00 WX55 Pneumatic conveyor WX55 Accessories included: control panel, self-cleaning cartridge filter, level sensor, product exhaust valve, alimentation cable for discharge hopper 10 mt, vacuum breaker 7.500,00 WX55x2 Pneumatic conveyor WX55x2 (with two discharge hoppers) Accessories included: control panel, self-cleaning cartridge filter, level sensor, product exhaust valve, alimentation cable for discharge hopper 10 mt, vacuum breaker, 2 hoppers included WX55x3 Pneumatic conveyor WX55x3 (with three discharge hoppers) Accessories included: control panel, self-cleaning cartridge filter, level sensor, product exhaust valve, alimentation cable for discharge hopper 10 mt, vacuum breaker, 3 hoppers included Pag 2

PNEUMATIC CONVEYORS WX55x4 Pneumatic conveyor WX55 (with four discharge hoppers) Accessories included: control panel, self-cleaning cartridge filter, level sensor, product exhaust valve, alimentation cable for discharge hopper 10 mt, vacuum breaker, 4 hoppers included WX60i Pneumatic conveyor WX60i Accessories included: control panel, with black-lit lcd display, self-cleaning cartridge filter, level sensor, product exhaust valve, alimentation cable for discharge hopper 10 mt, vacuum breaker 9.000,00 CPV20 Mobile pneumatic conveyor under pressure 300 kg/h / 2,2 kw 5.000,00 CPS22 Mobile pneumatic conveyor under pressure 1 ton/h /2,75 kw 5.700,00 SVP75 Mobile pneumatic conveyor under pressure 6 ton/h /8,25 kw 19.500,00 ACCESSORIES FOR SUCTION MOTORS WX11-PT23 Wall bracket for suction motor WX11 40,00 CV20 20 mt wire to connect discharge hopper-suction motor WX11 38,00 CV2052 20 mt wire with switch 5P for hopper-suction motor WX52 60,00 WX1005 Mini hopper for burners 500,00 MG50E Rubber sleeve for hose flex Ø50 10,00 FL0001 Fluidising 60,00 EINE01 Compressor with induction silencer 6 lt for model WX52 500,00 WX11-FPA Polyester antistatic filter for suction motor WX11 80,00 KTE3G Kit for remote control via LAN/3G for suction motors WX11-15-52 Pag 3 www.denawx.com info@denawx.com

SILOS SIT5 Fabric storage silo SIT of 5 m 3 Accessories: 1 Fuel filler Storz 4 2.860,00 SIT8 Fabric Accessories: 1 Fuel filler Storz 4 storage silo SIT of 8 m 3 3.100,00 SIT10 Fabric storage silo SIT of 10 m 3 Accessories: 1 Fuel filler Storz 4 3.500,00 ESA250-19 Galvanized steel Silo ESA of 8 m 3 (with 2 fuel fillers storz 4, suction probes, manual changeover unit) 3.200,00 ESA250-16 Glavanized steel silo ESA of 7,2 m 3 (with 2 fuel fillers storz 4,suction probes, manual changeover unit) 3.200,00 ESA200-19 Galvanized steel silo ESA of 5 m 3 (with 2 fuel fillers storz 4, with suction probes, manual change over unit) 2.600,00 ESA200-16 Galvanized steel silo ESA of 4,3 m 3 (with 2 fuel fillers storz 4, suction probes, manual changeover unit) 2.800,00 ESA160-19 Galvanized steel silo ESA of 3 m 3 (with 2 fuel fillers storz 4, suction probes, manual changeover unit) 2.300,00 ESA160-16 Galvanized steel silo ESA of 2,6 m 3 (with 2 fuel fillers storz 4, suction probes, manual changeover unit) 2.300,00 SL0001M Galvanized steel silo SUM1 of 1 m 3 570,00 SL0015M Galvanized steel silo SUM1 of 1,5 m 3 890,00 Pag 4

SILOS SL0002M Galvanized steel Silo SUM1 2 m 3 1.440,00 SL0003M Galvanized steel Silo SUM1 3 m 3 1.780,00 ACCESSORIES FOR SILOS PR12ES Pneumatic extraction unit for silo SIT 380,00 CE00WX Extraction unit with screw for silo SIT/SUM 1.000,00 SIT-R40 Adapter for screw connection silo SIT 360,00 PR000ES Pneumatic extraction unit for silo SUM 260,00 ES0050 Extension module of 0,5 m 3 for article SL0001M 320,00 GR0001 Safety greed for silo SUM 200,00 KITSUM1 KITSUM2 Kit for loading from tanker for articles SL0001M-SL0015M made of: n 1 storz 4 with fixing plate, fabric roof Kit for loading from tanker for articles SL0002M-SL0003M made of: n 1 storz 4 with fixing plate, fabric roof 300,00 350,00 BR0004 Storz 4 with plate for silo ESA/SUM 200,00 AC0001 Rubber protection for silo ESA/SUM 280,00 BR00ST Plug 4 for fuel filler storz 60,00 BR0005 Storz 4 with plate for silo SIT 200,00 SL0001 Weight system for silo SIT/SUM PR22ES Pneumatic extraction unit for silo SIT with double suction 480,00 Pag 5 www.denawx.com info@denawx.com

ASHCLEANER AND ACCESSORIES PRC01 Ash-preseparator 20 lt 160,00 PRC15 Ash-preseparator 150 lt 800,00 PRC15H Ash-preseparator 150 lt water system for incadescent ash 1.150,00 KTA01 Hose kit Ø 40 3 mt length with handle 70,00 KTA03 Hose kit Ø 40 6 mt lenght with handle 110,00 KTA02 Hose kit Ø 40 3 mt length with noozle 70,00 KTA04 Hose kit Ø 40 6 mt length with noozle 110,00 KTS01 Hose kit Ø50 for quick connection suction motor-ashcleaner 48,00 PRC-S1 Set 100 pieces plastic bags for model PRC 01 PRC-S15 Set 100 pieces plastic bags for model PRC 15 MG50E rubber sleeve for hose flex Ø50 10,00 Pag 6

ACCESSORIES FOR PELLET STORAGE ROOM PR0001 Suction probe 120,00 PR0011 Manual changeover unit for Nr. 2 suction probes 380,00 PR0012 Manual changeover unit for Nr. 3 suction probes 460,00 PR0014 Manual changeover unit for Nr. 4 suction probes 520,00 PR0018 Manual changeover unit for Nr. 8 suction probes 630,00 SPAUT04 Automatic change over unit for Nr. 4 suction probes 3.000,00 PP0004 Wall connection plate for Nr. 8 hoses Ø50 440,00 PP0008 Wall connection plate for Nr. 16 hoses Ø50 600,00 BR0006 Storz 4 with plate and extension cable 50 cm 280,00 AC0002 antischock rubber for storage room 280,00 RI0050 steel pipe reduction from Ø60 to Ø50 40,00 Pag 7 www.denawx.com info@denawx.com

ACCESSORIES FOR PLANT FS0001 Compression clamp for hose TB0001 Ø50 2,88 FS0004 Compression clamp for hose TB0003 Ø60 3,40 FS0002 Compression clamp for hose Ø50 TB0002 40,00 FS0003 Compression clamp Ø60 for hose TB0005 52,00 TB0001 Antistatic flexible hose Ø 50 (min. order 20 mt) 13,80 TB0003 Antistatic flexible hose Ø 60 (min. order 20 mt) 18,00 TB0004 Antistatic flexible hose HDS Ø 80 (min. order 20 mt) 60,00 TB0002 Galvanized steel rigid tube Ø50 mm (length 4mt) 14,00 TB0005 Galvanized steel rigid tube Ø60 mm (length 4mt) 20,00 CA5001 Galvanized steel bend 90 Ø50 mm 34,00 CA5002 Glavanized steel bend 90 Ø60 mm 46,00 MG50C Rubber sleeve for hose flex connection Ø50 mm 40,00 Pag 8

ACCESSORIES FOR PLANT PR3669 Suction probe for big-bag ( h 1.000 mm ) 494,00 PR3670 Suction probe for big-bag ( h 2.000 mm ) 560,00 PR3669T Big bag emptying unit with bag-breaker, bottom discharge. VLS001 Emptying valve pellet line Ø50 560,00 VAY-P Deviating valve type y, 2 ways pellet line Ø50 812,00 VAY-V Deviating valve type y, 2 ways vacuum line Ø50 760,00 VAY-P1 Deviating valve type y, 1 way pellet line Ø50 660,00 VAY-V1 Deviating valve type y, 1 way vacuum line Ø50 600,00 VAY-P3 Deviating valve type y, 3 ways pellet line Ø50 1.180,00 VAY-V3 Deviating valve type y, 3 ways vacuum line Ø50 1.090,00 VAY-P4 Deviating valve type y, 4 ways pellet line Ø50 1.450,00 VAY-V4 Deviating valve type y, 4 ways vacuum line Ø50 1.250,00 Pag 9 www.denawx.com info@denawx.com

ACCESSORIES FOR THE PLANT CM0001 Wall connection clamp for hose flex TB0001 Ø50 11,00 CM0002 Wall connection clamp for rigid hose TB0002 Ø50 10,00 VAC600 Vacuum gauger for sealing hoses test 0-600 mbar 160,00 TR0056 Steel hose Ø50 for gripping point vacuum gauger/ vacuum switch for rilsan hose Ø6 60,00 TR0066 Steel hose Ø60 for gripping point vacuum gauger/ vacuum switch for rilsan hose Ø60 70,00 TUEX06 Rilsan hose Ø6 extraflex for pneumatic connections 3,00 TUEX08 Rilsan hose Ø8 extraflex for pneumatic connections 3,50 FL0001 Fluidising 60,00 VAY-V21 Deviating valve y type, 1 way vacuum line hose Ø 2 610,00 VAY-V22 Deviating valve y type, 2 ways vacuum line hose Ø 2 760,00 VAY-V23 Deviating valve y type, 3 ways vacuum line hose Ø 2 1.090,00 VAY-V24 Deviating valve y type, 4 ways vacuum line hose Ø 2 1.250,00 Pag 10

SPARE PARTS MPB015 Monophase engine for suction motors WX11-15 216,00 MMWX50 Engine for suction motors WX52-WX52BFR 1.150,00 CEQ001 Unit control for suction motors WX11-15 (52) 264,00 MSP015 Kit brushes for suction motors WX11-15 30,00 SENS01 Sensor for discharge hoppers WX5-10-10C-52 72,00 SENS02 Sensor for discharge hopper WX55 120,00 CAR218H26 Filtering cartridge WX52/BFR 160,00 WX11-FPC Filter for suction motor WX11 26,00 WX11-FPA Polyester antistatic filter for suction motor WX11 80,00 GRZ005 Seal for discharge hopper WX5 11,00 GRZ010 Seal for discharge hoppers WX10-10C-15-52 12,00 Pag 11 www.denawx.com info@denawx.com

DENA GROUP srls Sede legale: Via Don Minzoni, 28 Lanciano (CH)- ITALY +39.0872.320.134 www.denaspirazioni.com info@denaspirazioni.com www.denawx.com info@denawx.com