Price quote for: Engine Driven Brush Chipper File: C796- Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Tri-State Bobcat, Inc Nick Kentros 71 Minnesota Ave Little Canada, MN 55117 651-407-3727 877-331-0295 651-788-9564 nickk@tristatebobcat.com Spec # Information Requested Answer Furnish separate price quote for: Engine Driven Brush Chipper 1.0 Engine Driven Brush Chipper Make & Model Bandit 21XP Drum Brush Bandit Is the Engine Tier IV Compliant (Yes/No) Yes, where indicated Chipper inch capacity 21" Weight 12,500 lbs (approximate) Engine type, model, HP, etc. Perkins 1204F, 174 hp - Tier 4 Fuel tank size 60 gallons Battery size (CCA) 1,400 Instrumentation Voltage, Amp, Temperature gauges Trailer tires (4) 235/85R 16" Trailer suspension type & capacity Tandem 7000 pound Torflex EZ lube axles Trailer Brakes Electric Brakes Trailer hitch type 2-1/2" Pintle Ring Feed table length 66-3/4" Distance from feed roller to ground 88-3/4" Feed rate 100 FPM Feed roller size and configuration (1) 32" wide x 15-3/4" diameter, (1) 32" wide x 10-5/8" diameter, horizontal Chipper cutting wheel size 37" diameter x 24" wide Number of chipper knives 4 Knife description information 5/8" thick x 5-1/2" wide x 12-1/8" long Height of discharge chute 9' 11" Chute rotation Manual 345 degree w/12" adj. chip deflector Hydraulic tank capacity 30 gallons
Warranty 1 year or 2000 hrs plus 5 year Bandit manufactured related to disc, drum & slide box components PRICE: $78,932.50
VENDOR NAME: TRI-STATE BOBCAT, INC MAKE AND MODEL OFFERED: BANDIT 21XP Spec # Description Qty Price Subtotal 2.0 ENGINE OPTIONS: Use this section to list optional engines, gauges, mufflers, etc. Number the items starting with 2.1, 2.2, etc., until you have listed all engine options. Use as many numbers as you need. 2.1 Perkins 1204F, 174 horsepower without clutch - Tier 4 FINAL (Includes Bandit control panel w/ fuel saver and reversing auto feed. Also includes 3 year / 3,500 engine warranty) (Track or loader units only) 1 $ - $ - 2.2 Caterpillar C4.4, 174 horsepower with over center style clutch - Tier 4 FINAL (Includes 3 year / 3,500 engine warranty) (Includes reversing auto feed with Bandit control panel and fuel saver) 1 $ 998.75 $ 998.75 2.3 Caterpillar C7.1L, 275 horsepower engine without clutch - Tier 4 FINAL (Includes Bandit control system w/ fuel saver and reversing auto feed. Also includes 3 year / 3,500 engine warranty) (Track or loader units only) 1 $ 12,622.50 $ 12,622.50 2.4 Caterpillar C7.1L, 275 horsepower engine with Twin Disc triple plate clutch - Tier 4 FINAL (Includes Bandit control panel, and 3 year / 3,500 hour engine warranty) 1 $ 13,961.25 $ 13,961.25 2.5 Caterpillar C7.1L, 321 horsepower with over center clutch - Tier 4 FINAL (Includes 2 position reversing fan, Bandit control panel, and 2 year / 3,000 hour engine warranty) 1 $ 33,341.25 $ 33,341.25 2.6 Caterpillar C7.1L, 321 horsepower engine without clutch - Tier 4 FINAL (Includes 2 position reversing fan, Bandit control panel, and 2 year / 3,000 hour engine warranty) 1 $ 31,152.50 $ 31,152.50 2.7 Perkins 1204F Twin Turbo, 174 horsepower with over center style clutch - Tier 4 FINAL (Includes 3 year / 3,500 engine warranty) (Includes reversing auto feed with Bandit control panel and fuel saver) 1 $ 892.50 $ 892.50 2.8 Perkins 1206F, 275 horsepower engine with Twin Disc triple plate clutch - Tier 4 FINAL (Includes 3 year / 3,500 engine warranty) 1 $ 13,238.75 $ 13,238.75 2.9 Perkins 1206F, 275 horsepower engine without clutch - Tier 4 FINAL (Includes Bandit control system w/ fuel saver and reversing auto feed. Also includes 3 year / 3,500 engine warranty) (Track or loader units only) 1 $ 11,900.00 $ 11,900.00 2.10 John Deere 6068HFC09, 300 horsepower engine without clutch - Tier 4 FINAL (Includes Bandit control panel, and 5 year / 5,000 hour engine warranty) 1 $ 23,672.50 $ 23,672.50 2.11 John Deere 6068HFC09, 300 horsepower engine with over center style clutch - Tier 4 FINAL (Includes Bandit control panel, and 5 year / 5,000 hour engine warranty) 1 $ 25,372.50 $ 25,372.50 2.12 John Deere 6090HFC09, 350 horsepower engine without clutch - Tier 4 FINAL (Includes Bandit control panel, and 2 year / 2,000 hour engine warranty) (MUST SELECT OFFSET BEARING PAD TO KEEP LEGAL WIDTH) 1 $ 38,441.25 $ 38,441.25 2.13 John Deere 6090HFC09, 350 horsepower engine with over center style clutch - Tier 4 FINAL (Includes Bandit control panel, and 2 year / 2,000 hour engine warranty) (MUST SELECT OFFSET BEARING PAD TO KEEP LEGAL WIDTH) 1 $ 40,141.25 $ 40,141.25 2.14 Volvo TAD870VE, 315 horsepower engine with SP314 Twin Disc clutch - Tier 4 FINAL (Includes Bandit control panel, reversing auto feed and 2 year / 3,000 hour engine warranty) 1 $ 42,733.75 $ 42,733.75 2.15 Standard manual clutch is included with engine 1 $ - $ - 2.16 311 WPT triple plate clutch with high drives 1 $ 8,032.50 $ 8,032.50 2.17 314 WPT triple plate clutch with high drives 1 $ 14,683.75 $ 14,683.75 2.18 Drive system for engines up to 275 horsepower 1 $ 871.25 $ 871.25 2.19 Drive system and frame for engines 300 horsepower and above 1 $ 2,571.25 $ 2,571.25 2.20 Dual steel battery box with two 1,400 CCA 8D batteries & aluminum tool box (Must be selected on Tier 4 engines 275 horsepower and above) 1 $ 420.75 $ 420.75 2.21 Offset bearing pad (Only to be used as an option when an engine calls for it) 1 $ 2,205.75 $ 2,205.75 2.22 Battery Disconnect Switch 1 $ 200.60 $ 200.60 2.23 Reversing Auto Feed with digital tach/hour meter (Units with heavy-duty or super-sized feed system) 1 $ 1,508.75 $ 1,508.75 2.24 Bolt-on shut-off switch for engine shut-down located on both sides of infeed hopper 1 $ 446.25 $ 446.25 2.25 Shut- off valve for fuel tank 1 $ 80.75 $ 80.75 2.26 Mesh strainer in hydraulic tank filler opening 1 $ 63.75 $ 63.75 2.27 Mesh strainer in fuel tank filler opening 1 $ 63.75 $ 63.75 2.28 Electric hydraulic tank sight gauge mounted on instrument panel 1 $ 250.75 $ 250.75 2.29 Electric fuel tank sight gauge mounted on instrument panel 1 $ 250.75 $ 250.75 TRAILER OPTIONS: Use this section to list trailer options such as flotation tires, different hitches, number these items 3.0 starting with 3.1, 3.2, etc. 3.1 Tandem 8,000 pound Torflex EZ lube axles with electric brakes 1 $ 1,432.25 $ 1,432.25 3.2 Tandem 10,000 pound Torflex axles with electric brakes 1 $ 2,677.50 $ 2,677.50 3.3 Tandem 10,000 pound Spring axles with air brakes 1 $ 5,478.25 $ 5,478.25 3.4 Tandem 12,000 pound Leaf Spring axles with electric brake 1 $ 4,462.50 $ 4,462.50 3.5 Tandem 12,000 pound Leaf Spring axles with air brakes 1 $ 7,437.50 $ 7,437.50 3.6 (4) ST235/80R 16" tires mounted on 8-bolt white spoke rims (Tire is approximately 9.43" wide, tire capacity is 3,520 pounds each) (Tandem 7,000 pound axles only) 1 $ - $ - 3.7 (4) ST235/80R 16â tires mounted on 8-bolt Aluminum rims (Tire is approximately 9.43" wide, tire capacity is 3,520 pounds each) (Tandem 7,000 pound axles only) 1 $ 361.25 $ 361.25 3.8 (4) 235/75R 17.5" tires mounted on 8-bolt heavy-duty gray rims (Tandem 8,000 pound axles on up) 1 $ 403.75 $ 403.75 3.9 (4) 235/75R 17.5" tires mounted on 8-bolt aluminum rims (Tandem 8,000 pound axles on up) 1 $ 1,678.75 $ 1,678.75 3.10 3/16" heavy-duty steel weld on tandem axle fenders 1 $ - $ - 3.11 Aluminum bolt on tandem axle fenders 1 $ 318.75 $ 318.75 3.12 3" Buyer's Product pintle hitch 1 $ 63.75 $ 63.75 3.13 3" pintle hitch with Model 20 actuator for hydraulic brake axles (18" shorter tongue) 1 $ 382.50 $ 382.50 3.14 Spare tire mounted on heavy-duty gray rim (235/75R 17.5") 1 $ 476.00 $ 476.00 3.15 Spare tire mounted on white modular rim (235/85R 16") 1 $ 408.00 $ 408.00 3.16 Spare tire mounted on aluminum rim (235/85R 16") 1 $ 446.25 $ 446.25 3.17 Spare tire mounted on heavy-duty gray rim (215/75R 17.5") 1 $ 403.75 $ 403.75 3.18 Spare tire mounted on aluminum rim for (215/75R 17.5") 1 $ 603.50 $ 603.50 3.19 Spare tire mounted on aluminum rim (235/75R 17.5") 1 $ 675.75 $ 675.75 3.20 Weld on spare tire mount (8 bolt rim) 1 $ 119.00 $ 119.00 3.21 7-PRONG (Round Pin) Male trailer plug 1 $ 42.50 $ 42.50 3.22 (2) Mud Flaps (1/4" x 12" x 18") 1 $ 80.75 $ 80.75 3.23 Hydraulic tongue jack w/ multiple position drop leg 1 $ 1,151.75 $ 1,151.75 3.24 Grapple barrel mounted on tongue 1 $ 1,083.75 $ 1,083.75 3.25 12" longer stationary tongue 1 $ 127.50 $ 127.50 3.26 Flag holder for Bolt-on fenders (includes flags) 1 $ 89.25 $ 89.25 3.27 Flag holder for Weld-on fenders (includes flags) 1 $ 59.50 $ 59.50 3.28 Single rear manual stabilizer 1 $ 97.75 $ 97.75
3.29 Dual rear manual stabilizers 1 $ 165.75 $ 165.75 3.30 7-PRONG (Flat Pin/RV-Style) Male trailer plug 1 $ 38.25 $ 38.25 3.31 10,000 pound capacity tongue jack with spring return pad 1 $ 106.25 $ 106.25 4.0 CHIPPER OPTIONS. Use this section to offer curbside feed, hydraulic swivel discharge, auto feed, etc. 4.1 Model 75 back hoe loader with swing-out operator's console, joystick controls, 60 gallon fuel and hydraulic tanks, and model 1850 tapered infeed hopper with 30" weld on tray. (Must select tandem 10,000 pound axle and (4) 235/75R 17.5" tire options.) 1 $ 26,770.75 $ 26,770.75 4.2 Model 75 back hoe loader controlled via wireless radio remote with tether back up. 1 $ 29,745.75 $ 29,745.75 4.3 Optional hydraulic bottom bump bar for infeed tray with override buttons on each side of infeed (painted red) (can be used to halt the forward motion of the feed wheels) 1 $ 1,615.00 $ 1,615.00 4.4 41" high x 64" wide tapered heavy-duty infeed with weld on pan and infeed deflectors (to be selected with 32" wide feed wheels only) 1 $ 276.25 $ 276.25 4.5 Radio remote control with tether back-up (Controls: feed forward / reverse, yoke up / down, discharge swivel, discharge flipper up/ down, winch, throttle and engine e-stop) (Must select hydraulic swivel discharge w/ flipper and hydraulic winch options) 1 $ 6,757.50 $ 6,757.50 4.6 Radio remote control with tether back-up (Controls: feed forward / reverse, yoke up / down, discharge swivel, discharge flipper up/ down, throttle and engine e-stop) (Must select hydraulic swivel discharge w/ flipper) 1 $ 6,332.50 $ 6,332.50 4.7 Radio remote control with tether back-up (Controls: feed forward / reverse, yoke up / down, throttle and engine e-stop) 1 $ 5,907.50 $ 5,907.50 4.8 Clear Infeed Curtain â 64â Infeed 1 $ 191.25 $ 191.25 4.9 Special over the top discharge (Folds back hydraulically for transport. Also includes hydraulic swivel and flipper) 1 $ 9,987.50 $ 9,987.50 4.10 Stops on discharge - 270 degree turn. 1 $ 34.00 $ 34.00 4.11 270 degree hydraulic controlled swivel discharge chute with manual 12" chip deflector 1 $ 722.50 $ 722.50 4.12 270 degree hydraulic controlled swivel discharge with hydraulic controlled 12" chip deflector 1 $ 1,317.50 $ 1,317.50 4.13 Stationary discharge system with up & down (50 Degrees) and side to side (50 Degrees) chip deflector, hydraulically operated. Also includes (1) bottom clean-out inspection door and replaceable back. 1 $ 3,612.50 $ 3,612.50 4.14 DELETE standard hand crank height and swivel discharge (to be manual swivel and non-height adjustable) 1 $ (552.50) $ (552.50) 4.15 Clean out and inspection door on transition 1 $ 148.75 $ 148.75 5.0 HYDRAULIC OPTIONS: Use this section to offer live hydraulics, hydraulic wench, etc. 5.1 Dinamic winch with line docking station with electronic joystick feed assist (Includes 5/16" diameter x 200' Samson Amsteel blue rope with HD thimble installed) 1 $ 5,057.50 $ 5,057.50 5.2 Dual rear hydraulic stabilizers 1 $ 1,572.50 $ 1,572.50 5.3 Hydraulic oil cooler 1 $ 845.75 $ 845.75 5.4 Hydraulic flow control for feed wheel rate adjustment 1 $ 446.25 $ 446.25 5.5 Pressure Check Gauge 1 $ 78.20 $ 78.20 5.6 Dual Rear Manual Stabilizers 1 $ 212.50 $ 212.50 6.0 OTHER OPTIONS: Use this section to offer other options 6.1 Standard Imron Industrial Urethane Bandit Yellow (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ - 6.2 Standard Imron Industrial Urethane White (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ - 6.3 Standard Imron Industrial Urethane Alert Orange (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ - 6.4 Standard Imron Industrial Urethane Cat. Yellow (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ - 6.5 Standard Imron Industrial Urethane Green (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ - 6.6 Standard Imron Industrial Urethane Black (For Whole Tree Chippers/Beast please specify Chipper Guard paint color or Bolt on parts color) 1 $ - $ - 6.7 Special Imron Industrial Paint (please specify paint color and number) (Requires specification) 1 $ 420.75 $ 420.75 6.8 Special Imron 5000 Paint (please specify paint color and number) (Requires specification) 1 $ 913.75 $ 913.75 6.9 Additional dual-edge knife 1 $ 72.25 $ 72.25 6.10 Knife saver kit (includes sharpener, file, safety gloves, and carrying case) 1 $ 51.00 $ 51.00 6.11 Debris resistant bearing package in lieu of standard 1 $ 165.75 $ 165.75 6.12 Intimidator 21XP wear kit (Includes 3 sets of knives, bolts, and nuts/washers, along with 1 anvil with hardware, knife sharpener, and anvil gauge) 1 $ 977.50 $ 977.50 6.13 Optional Chip Breaker 1 $ 1,100.75 $ 1,100.75 6.14 Double Teeth (Bottom Feed Wheel) - Available on 1890SS & Intimidator 12XP 1 $ 238.00 $ 238.00 6.15 Tool kit for Handfed Chippers Includes: - Screwdriver set (4 pc) - ½â Drive Torque wrench (25-250 ft) - ½â Drive Socket set w/ratchet (18 pc) - Crescent wrench - Open end wrench set (14 pc) - Balldriver tool set (13 pc) - ½â Drive slott 1 $ 403.75 $ 403.75 6.16 Extra set of oil, air, and fuel filters for Caterpillar and Perkins 225 and 275 horsepower engines 1 $ 182.75 $ 182.75 6.17 Chip Breaker (3/8â Belly Band) 1 $ 1,275.00 $ 1,275.00 6.18 Replaceable holders with Babbitted knives 1 $ 1,870.00 $ 1,870.00 6.19 Additional Hydac hydraulic filter 1 $ 42.50 $ 42.50 6.20 Tool kit to change knives for hydraulic drum chippers 1 $ 89.25 $ 89.25 6.21 Rubber Wheel Chocks (2) 1 $ 76.50 $ 76.50 6.22 Aluminum Bolt On Chock Holders (Does not include chocks) 1 $ 110.50 $ 110.50 6.23 Steel Weld On Chock Holders 1 $ 110.50 $ 110.50 6.24 4" x 6 1/2" inspection window on belt shield 1 $ 106.25 $ 106.25 6.25 Pole style cone holder (weld on) 1 $ 89.25 $ 89.25 6.26 Weld on hoop style cone holder 1 $ 106.25 $ 106.25 6.27 Bolt-on hoop style cone holder 1 $ 250.75 $ 250.75 6.28 Bolt-on Double Cone Holder 1 $ 297.50 $ 297.50 6.29 Extra chipper operators manual (standard version) 1 $ 34.00 $ 34.00 6.30 Extra engine operators manual 1 $ 76.50 $ 76.50 6.31 Wilton 5 1/2" swivel steel vice, w/ mount 1 $ 335.75 $ 335.75 6.32 Hydraulic Last Chance Cables 1 $ 374.00 $ 374.00 6.33 2 1/2 pound fire extinguisher with mount 1 $ 80.75 $ 80.75
6.34 Spring loaded cleanout door (in lieu of standard) 1 $ 127.50 $ 127.50 6.35 Combination English / Canadian French decals (Note: these would be the safety decals only) 1 $ 63.75 $ 63.75 6.36 Non skid coating on tongue and all step on areas 1 $ 148.75 $ 148.75 6.37 Grease gun (10,000 PSI) 1 $ 76.50 $ 76.50 6.38 Dual Wig Wag LED Strobe Lights 1 $ 446.25 $ 446.25 7.0 EXTENDED WARRANTY OPTIONS 7.1 Price: 8.0 DELIVERY CHARGES - SEE SPECIAL TERMS AND CONDITIONS NO FLAT RATE ALLOWED DELIVERY STARTING POINT - City, State, Zip PRICE PER LOADED MILE: $ MINIMUM DELIVERY CHARGE (if applicable) $ 9.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: $ Weekly Rental Rate: $ Monthly Rental Rate: $ Percent (%) of Rental Fee applied to purchase price: % If the new rental equipment is purchased and finance charges are applicable for the actual rental term only, state the actual interest rate here: VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price $ DISCOUNT OFF LIST PRICE FOR RELATED PARTS AND ACCESSORIES 10.0 (See Special Terms and Conditions) Price List Date and Number: 12/15/2017 % Discount