Parts Manual for REAR ENGINE RIDER SERIES 22 MODELS 280922B W280922B 2822BE 281222BE 00922B 022BE W022BE 01222BE 14522BVE 1522KVE IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT 2002 SNAPPER INC. ALL RIGHTS RESERVED (Rev. 1, 0/0/02) MANUAL No. 0128
CONTENTS DESCRIPTION PAGE WHEELS, FRONT... WHEELS, REAR...4 & 5 FRONT END, STEERING... & MAIN CASE...8 & 9 DIFFERENTIAL, R.H. FENDER... & 11 CHAIN CASE, L.H. FENDER...12 & 1 SMOOTH CLUTCH ASSEMBLY...14 & 15 CUTTING DECKS, DEFLECTORS...1 & 1 RAILS, LIFT ARMS, CAM LIFT...18 & 19 BLADE STOP PEDALS... 20 SPINDLE ASSEMBLY... 21 BELTS, BRAKES, INTERLOCK...22 & 2 DRIVE DISC ASSEMBLY... 24 FUEL TANK & OPERATOR S SEAT... 25 ENGINES & EXHAUST MUFFLER... 2 THROTTLE CONTROL... 2 DECALS...28 & 29 ELECTRICAL SYSTEMS (For 9 HP Briggs, Recoil Start)...0 & 1 ELECTRICAL SYSTEMS (For & 12 HP Briggs)...2 & ELECTRICAL SYSTEMS (For 14.5 HP Briggs)...4 & 5 ELECTRICAL SYSTEMS (For 15 HP Kohler)... & WIRING SCHEMATICS... 8 thru 41 HARDWARE BAGS...42 ACCESSORIES AND ATTACHMENTS... 44 MANUAL No. 0128 R. E. RIDER SERIES 22 2
WHEELS - FRONT 5 1 ASSEMBLY 9 2, 2A 12 4 4 11 8 1 5-894 ASSEMBLY, Front Tire & Rim (Complete) (Includes Items 2,, 4, 5 &, ) 2-5 TIRE, 11 x 4.00-4 (Kenda) 1-14 RIM (For 4./.50 x 4 Tire) 4 1-180 BEARING, Ball 5 1-224 VALVE, Air (Snap-in) 1-49 FITTING Lube 1-095 WASHER, /4 I.D. 8 1-22 CAP, Hub 9 1-2 SEAL, Felt -8 CAP, Dust 11 9-151 PIN, Cotter 5/2 x 1" (2) 12 1-0821 TUBE, Inner (For 4./.50 x 4 Tire) R. E. RIDER SERIES 22 MANUAL No. 0128
WHEELS - REAR 14 LEFT HAND 11 12 1 9 1 ASSEMBLY RIGHT HAND 2 15 1 8 5 4 MANUAL No. 0128 R. E. RIDER SERIES 22 4
WHEELS - REAR 1 5-8951 ASSEMBLY, Rear Tire & Rim (Includes Items 2, & 4) (28", 0 Models) 2-584 TIRE, 1-.50 x 8 (" Models) 1-14 RIM, Extra Wide, (For 1/.50 x 8 Tire) (" Models) 4 1-224 VALVE, Air (Snap-in) 5 1-22 CLAMP, Right Hand (8, & 1 HP) -- 1-4542 CLAMP, Right Hand (12, 14 & 15 HP) 9-1502 BOLT, 1/2-20 x /4" Lug () -12 BOOT, Right Hand 8 1-181 SEAL, Oil 9 4-04 HUB, Rear Wheel R. H. (Weldment) 2-895 CAP, Hub 11 2-522 CAP, Hub (Left Hand) 12 4-044 HUB, Rear Wheel L.H. (Weldment) 1 1-1201 NUT, 5/1-24 Hex Center Lock 14 1-5 BOLT, 5/1-24 x 1-5/8" Tapered (Left Hand) 15 1-1 BOLT, 5/1-24 x 2" Tapered (Right Hand) R. E. RIDER SERIES 22 MANUAL No. 0128 5
FRONT END, STEERING 2 1 8 45 9 4 22 24 2 2 5 19 20 5 29 1 18 21 2 4 8 28 2 11 20 9 41 25 40 1 1 12 12 12 15 1 12 1 0 1 14 0 MANUAL No. 0128 R. E. RIDER SERIES 22
FRONT END, STEERING 42 4 44 1 5-800 STEERING WHEEL (for 5/8 shaft) (includes item 2) 2 2-81 LOGO, Steering Wheel 1-82 PIN, 1/4" x 1-1/2" Roll 4-824 LATCH, Parking Brake 5 2-2449 CABLE, Clutch/Brake(54.2 ) (for 28 & 0 Decks) -- -411 CABLE, Clutch (55 long) (for & 42 Decks) 9-0122 WASHER, /8 Flat (2) 1-1815 PAD, Clutch/Brake Pedal 8 1-094 BUSHING, Nylon 9 4-888 PEDAL, Clutch/Brake (weldment) 1-098 BEARING, Nylon (4) 11 4-22 SHAFT, Steering (weldment) 12 1-21 BUSHING, Tie-Rod (4) 1 1-02 TIE-ROD, Left Hand (.41 long) -- 1-2541 TIE-ROD, Left Hand (9.91 long) 14 4-18 KING-PIN Weldment, Left Hand 15 1-29 TIE-ROD, R. H. (.41 long) -- 1-2540 TIE-ROD, R. H. (9.91 long) 1 4-188 KING-PIN, Weldment Right Hand 1 5-8040 WELDMENT, Front Axle, Narrow (28 & 0 Deck) -- 5-919 WELDMENT, Front Axle, Wide ( Deck) 18 1-4049 FOOT PAD, Short (2) -- 1-4048 FOOT PAD, Long (2) 19 1-5444 SPRING, Parking Brake 20 9-018 WASHER, 21/2 I. Dia.(2) 21 4-158 BUSHING, Nylon (2) 22 1-114 PIN, Hair 2 2- FOAM COVER, Steering Shaft 24 9-029 PIN, /1 x 1" Cotter 25 9-1514 WASHER, /8 Flat (2) 2 1-28 PIN, Hair (.125 Dia. Wire) 2 2-2881 SPACER, 1/2" (5) 28 1-0 RING, 1/2 External Retaining (Heavy Duty) 29 1-04 RING, /4 Ext. Retaining (2) 0 9-05 PIN, 1/8 x /4" Cotter (2) 1 1-095 WASHER, 5/8 Flat () 2 2-1 COVER, Steering Shaft 2-895 SPACER, Pivot 4 2-82 STUD, Shoulder (/8-24 Thread) 5 9-0854 NUT, /8-24 Hex Nyloc -248 CABLE, Brake (29 long) -414 CONNECTOR, Cable (2) 8 9-1495 SCREW, 1/4-20 x /4", Gr. 5 9 9-02 NUT, 1/4-20 Hex Center Lock 40 9-05 PIN, /1" x 1-1/2" Cotter 41 9-04 PIN, 5/2 x 1 Cotter (2) 42-450 HOLDER, Wire- Bottle 4 9-091 SCREW, #-24 x 1/2 Hex Washer Self-Tap (2) 44-451 BOTTLE, Water 45-4599 PLATE, Thrust R. E. RIDER SERIES 22 MANUAL No. 0128
MAIN CASE 19 9 8 49 5 50 2B 1 21 52 * 5 50 1 * 50 51 5 50 1 5 48 4 4 22 42 2 5 CONNECTS TO ITEM 15 ON PAGE 9 4C 50 5 0 1 5 11 4A 5 50 1 4 2A 29 8 9 9 12 8 21 19 * NOTE: The heads of these fasteners are located underneath the main case. MANUAL No. 0128 R. E. RIDER SERIES 22 29 2 29 8
2 29 SPRING (2-292) PART OF ITEM 1 MAIN CASE 20 14 18 24 25 4 2 1 41 5 50 40 45 44 4 1 2 28 15 1 5-8044 WELDMENT, Main Case -- 5-9202* WELDMENT, Main Case 2A -098 BUMPER, Rear (2) 2B - BUMPER (1-piece) ( Deck) -285 FENDER, Left Hand 4A -419* GUIDE, Belt 4B 1-5 GUIDE, Belt (not shown) 4C -418** GUIDE, Belt 5 4-189 BRACKET, Drive Support 9-0595 BOLT, 5/1-18 X /4" Hex Flange Lock, Grade 5 (2) 1-015 CAP, Bumper (2) 8 9-0585 NUT, 5/1-18 Hex Fl. Lock () 9 1-099 NUT, 5/1-24 Hex Flange Lock 2- LINK, Shift (Long) 11 4-184 ARM, Shift 12-99 BRACE, Cross 1 1-18 LINK, Shift (Short) 14 9-019 NUT, 5/1-18 Hex, Gr. 5 or B 15 4-0598 ARM, Shift Handle (weldment) 1 1-054 SPRING, Shift Handle 1 5-8 ASSEMBLY, Shift Detent (Incl. Spring, part no. 2-292) 18 5-9212 HANDLE, Shift (weldment) 19 9-150 HAIRPIN, /2 X 1-1/2" (2) 20 2-5 GRIP, Shift Handle 21-4299 WING, Rear (2) 22 2-2509 BUSHING, Pilot 2-5 BRACKET, Switch 24 9-00 PIN, /2 x /4" Cotter 25 2-914 PIN, 1/4 x 1-/4" Tapered Clevis 2 1-9245 BUSHING, Nylon 2 - WASHER, Thrust (2) 28 1-924 BUSHING, Nylon (2) 29 9-01 SCREW, 5/1-18 x 5/8" Self Tap (14) 0 9-0981 SCREW, #-2 x 1/4" Hex Washer Self-Tap (2) 1 9-129 WASHER, 5/1" Flat (4) 2 1-252 CLIP, Wire 9-091 WASHER, 5/1 Internal Tooth Lock 4 9-0484 SCREW, 5/1-18 x 1-1/2" (4) 5 9-151 SCREW, 5/1-24 x 1-1/2" Hex Head Cap, Grade 5 (4) 1-191 RETAINER, 5/1 Bolt (4) 9-020 SCREW, 5/1-18 x /4" Cap 8 9-09 SCREW, 5/1-18 X /4" Hex Self-Tap (4) 9 2-8200 SWIVEL (2) 40 2-8989 COVER, Switch (series 19 & earlier) -- -28 COVER, Solenoid (series 20 & later) 41 2-8990 COVER, Battery 42 9-122 FASTENER, 1/4 Ratchet () 4 1-51 BOLT, 5/1-18 Shoulder 44-289 LEVER, Over-Ride 45 9-1595 WASHER, /1 Flat 4 9-1298 NUT, 5/1-18 Nyloc 4 2-248 OIL DRAIN, Short 48 2-92 ASSEMBLY, Oil Valve 49-4190 PLATE, Engine (Kohler engine) 50 9-115 WASHER, 5/1 Split Lock (8) 51-92 BOLT, M8-1.25 x 25mm, Self- Tap (Kohler) 52 9-028 SCREW, 5/1-24 x 1 Gr. 5 (4) 5 9-129 NUT, 5/1-24 Hex, Grade 5 (8) *1522KVE Model only **14522BVE Model only R. E. RIDER SERIES 22 MANUAL No. 0128 9
DIFFERENTIAL, R. H. FENDER 2A 24 2 2 25 1 4 4 5 2 22 9 2 21 8 2 28 11 14 12 15 28 1 2 29 0 1 20 1 5 19 MANUAL No. 0128 R. E. RIDER SERIES 22 1 18 1
DIFFERENTIAL, R. H. FENDER 1 1-4401* COLLAR, Lock (Includes P.N. 9-0201, 5/1-18 x 5/1 Setscrew) 2 1-8822* BALL BEARING, Axle (Right Hand Fender) 2A 1-229 BEARING, Axle (Right Hand Fender) (standard bearing) 1-099 NUT, 5/1-24 Hex Flange Lock 4-9 WASHER, Thrust 5-80 PLATE, Differential 2-2115 SPACER, Pinion (4) 2-112 GEARS, Differential Pinion (4) 8 1-2 WASHER, Thrust 9 5-1584 ASSEMBLY, Drive Hex Tube 1-0988 WASHER, Hex Nylon Splash () 11 1-094 GEAR, 11 Teeth- Pitch 12 1-0941 CHAIN, 4 Pitch (No. 5) 1 2-1129 SPROCKET 14 1-095 RING, External Retaining 15 2-1128 SPACER 1 1-22 CLAMP, Boot (2) 1 1-08 BOOT, Oil Seal 18 1-24 PLUG, Oil Fill & Check 19-29 CASE, Transmission 20 2-82 GASKET, Transmission Case 21-280 FENDER, Right Hand (standard fender) (1.2 hole) -- -95 FENDER, Right Hand (optional fender) (2.498 hole) 22 2-1158 GEAR, Teeth- Pitch -- 2-44 GEAR, Teeth Pitch (1522KVE Model only) 2 4- AXLE, Long (Includes Gear) (Use Only With Short Axle P.N. 5-98) 24-441 SPACER 25 5-98 AXLE, Short (Includes Gear) (Use Only With Long Axle P.N. 4-) 2 1-2 SCREW, 5/1-24 x 1-5/8" Hex Cap Special Lock (4) 2 1-115 O-RING, 5/1 (2) 28 1-182 WASHER, 5/1 Belleville (2) 29 9-095 WASHER, 5/1 External Tooth Lock 0 9-0188 WASHER, 5/1 Flat 1 1-42 BOLT, 5/1-24 x 2-5/8" Idler 2 9-01 SCREW, 5/1-18 x 5/8" Hex Washer Self-Tap (11) 9-02 SCREW, 1/4-20 x 5/8" Hex Washer Self-Tap (1) 4-2 SPACER, Short Axle 5-1 GREASE, Transmission (24 oz. Required) -- -0411 KIT, Differential (Includes 2A & -280 Fender) -- -02 KIT, Differential (Includes items 2 & -95 Fender) *Optional Ball Bearing may be used (requires use of -95 fender R. E. RIDER SERIES 22 MANUAL No. 0128 11
CHAIN CASE, L. H. FENDER 1 ASSEMBLY 14 2 15 1 5 1 4 4 1 9 5 8 4 1 12 9 11 25 2 29 19 ASSEMBLY 28 2 25 2 1 ASSEMBLY 21 20 2 22 18 5 24 0 MANUAL No. 0128 R. E. RIDER SERIES 22 12
CHAIN CASE, L. H. FENDER 2 ASSEMBLY 9 8 1 5-28 ASSEMBLY, Chain Case (Includes items 2 thru 1, 15, 1, & 1 thru 5) 2 4-11 CASE, Sprocket 2-81 GASKET, Case Cover 4 1-1121 WASHER,.40 I.D. Belleville (2) 5 1-05 BEARING, Ball (2) 1-89 SPROCKET & SHAFT 1-014 KEY, 1/8 x 5/8" Woodruff 8-98 COVER, Chain Case 9 1-0942 BEARING, Needle (2) 1-8 WASHER, Nylon Thrust (2) 11 4-055 HUB & SPROCKET 12 1-0941 CHAIN 1 9-00 SCREW, #-24 x 5/8" Hex Washer Self-Tap () 14 1-24 PLUG, Oil Fill & Check 15 2-285 ROLLER 1 1-0 RING, 1/2 Heavy Duty External Retaining 1 5-918 ASSEMBLY, L. H. Fender & Bearing (Incl. items 18 & 19) 18-285 FENDER, Left Hand (1.28 I.D. hole) 19 5-282 ASSEMBLY, Axle Bearing (Incl. items 20 thru 2) 20-4184 BEARING, Axle 21 1-24 FITTING, Lube (for /1 hole) 22-4500 SEAL, Dust/Grease Axle 2-4182 BEARING, DX (2) 24 1-0 ROD, Cross-Tie 25 1-22 CLAMP, Boot (2) 2 1-084 BOOT, Oil Seal 2 1-1 WASHER, Thrust Nylon 28 1-2 WASHER, Thrust 29 9-1505 NUT, 5/8-18 Hex Nyloc 0 1-099 NUT, 5/1-24 Hex Flange Lock 1 1-920 O-RING (2) 2 2-44 SPACER (used with optional ball bearing, item 8 only) 1-221 WASHER, Shim (As Required) 4 2-981 WASHER, Shim () 5-1 GREASE, Transmission (Use 2 oz. maximum) 5-1451 ASS Y, L. H. Fender & Ball Bearing (optional, incl. items -9) -958 FENDER, Left Hand (1.44 I.D. hole) 8 1-424 BALL BEARING, Left Hand Fender 9 1-425 COLLAR, Lock (Includes #9-0 Setscrew 1/4-20 x 1/4") (Used with ball bearing, item 8, only) NOTES: 1- See Pages 14 & 15 For Illustration of brake lever assembly and related parts. 2- Item may be substituted for item 1 if ball bearings are preferred. R. E. RIDER SERIES 22 MANUAL No. 0128 1
SMOOTH CLUTCH ASSEMBLY 14 0 2 2 29 1 1 2 2 25 29 24 15 19 28 1 4 8 1 5 11 12 22 1 21 18 2 4 1 1 21 9 20 See page, Item 40 18 MANUAL No. 0128 R. E. RIDER SERIES 22 14
SMOOTH CLUTCH ASSEMBLY NOTE: Brake Return Replacement Kit (-119) is made up of items 11 and 1. 1 5-114 ASSEMBLY, Smooth Clutch (Includes Items 2 thru ) 2 5-424 HUB, Driven Disc (assembly) 5- DISC, Driven (rubber tire bonded to rim) 4 1-452 WASHER, Thrust 5-21 PLATE, Drive Disc 9-0585 NUT, 5/1-18 Hex Flange Lock (4) 5-249 ASSEMBLY, Brake Lever (Includes Brake Lining & Rivet) 8 1-21 RING, /8 External Retaining 9 9-00 NUT, 1/4-28 Hex Top Lock 9-1294 WASHER, 1/4 Flat 11-259 SPACER 12 9-1504 SCREW, 1/4-28 x 1" Hex Head Cap, Grade 5 (washer face) 1-240 SPRING, Brake Return 14 1-885 SPRING, Clutch Brake 15 4-12 LIFT, Yoke 1 1-48 BEARING, Yoke (2) 1 1-1201 NUT, 5/1-24 Hex Center Lock (2) 18 9-028 SCREW, 5/1-24 x 1" Hex Head Cap, Grade 5 (2) 19 9-1198 SCREW, /8-1 x 5/8" Hex Washer Self-Tap 20-291 COLLAR, Yoke 21 1-1 WASHER, 5/1 Flat (2) 22 - ARM, Yoke 2 9-059 SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap (2) 24 1-544 STUD (/8-24 thread) 25 9-090 WASHER, /8 Internal Tooth 2 9- NUT, /8-24 Hex, Grade 5 or B 2 4-190 BRACKET, Slide 28 9-00 PIN, /2 x /4 Cotter 29 1-4 SLIDE HALF (2) 0 1-44 BOLT, 5/1-18 Shoulder 1 9-018 WASHER, 5/1 Split Lock 2 9-019 NUT, 5/1-18 Hex, Grade 5 or B 9-0122 WASHER, /8 SAE Flat (2) 4 5-908 ASSEMBLY, Leaf Spring R. E. RIDER SERIES 22 MANUAL No. 0128 15
CUTTING DECKS, DEFLECTORS 1 4 22 2 0 2 29 28 2 2 1 41 42 40 RAILS & LIFT ARMS ASSEMBLY (See Pages 18 and 19) 21 1 1 21 2 14 15 12 1 11 8 2 (0 Deck) SILHOUETTE OF BLADE, ITEM 4 4 5 24 9 20 19 1 9 25 20 5 19 SILHOUETTE OF SPINDLE ASS Y. (See Page 21 For Parts Breakdown) 44 1 8 5 9 4 45 NOTE: Blade part number appears On blade. 18 NOTE: 4 The 25, 28 and decks are round. The 25 deck has no square rib on top. MANUAL No. 0128 R. E. RIDER SERIES 22 1
CUTTING DECKS, DEFLECTORS 1-44 COVER, Spindle 2-190 DECK, 28 (Painted w/decals) -- -191 DECK, 0 (Painted w/decals) -- -192 DECK, (Painted w/decals) -0480 KIT, Air Lift (25, 28 & Deck) (incl. items 4 thru ) -- -05 KIT, Air Lift (0 Deck) (incl. items 4 thru ) 4-2 AIR-LIFT (2) (25, Deck) -- -124 AIR-LIFT (2) (0 Deck) 5 9-0228 SCREW, 5/1-24 x 11/1 Machine () 9-091 WASHER, 5/1 Internal Tooth Lock () 9-022 NUT, 5/1-24 Hex () 8 5-2555 DEFLECTOR, 28 / Deck Discharge (includes items 9,, 11, 12, 14) 9 2-81 DECAL, Danger -80 HINGE, Deflector (1 long) A 2-459 HINGE, Deflector (8 long) 11 1-41 SPRING, Hinge (use with 2-24 Pin) 11A 1-428 SPRING, Hinge (use with 2-84 Pin) 12 2-24 PIN, Hinge ( L-shaped) (1-1/4 long) 12A 2-84 PIN, Hinge (straight) (8-/8 long) 1 9-0 NUT, 5/1-18 Hex Flange Lock 14 2-48 NUT, 1/4 Push (2) 15 9-0584 BOLT, 1/4-20 x 1/2 Hex Fl. Lock 1 5-255 DEFLECTOR, 0 Discharge (incl. items 9, A, 11A, 12A) 1 9-129 WASHER, 5/1 Flat (2) 18 9-092 SCREW, 1/2-20 x 1 Hex Head Cap, Grade 5 (2) 19 9-0509 WASHER, 1/2 Internal Tooth Lock (2) 20 9-0559 NUT, 1/2-20 Hex Jam (2) 21 9-1508 BOLT, 5/1-18 x /4 Short Neck Carriage, Grade 5 (2) 22 9-1 SCREW, 1/4-20 x 5/8 Hex Washer Self-Tap (4) 2 9-15 BOLT, 5/1-18 x 1/2 Hex Washer Self-Tap Gr. 5 () 24 9-1525 BOLT, 5/1-18 x 1/2 Hex Flange Lock (2) 25 9-01 NUT, /18-1 Hex Flange Lock (9) 2-50 BRACKET, Gage Wheel (Front) (28 & Decks) 2 9-152 SCREW, /8-24 x -/4 Hex Head Cap, Grade 5 () 28 1-9190 WHEEL, Gage () 29 1-522 SPACER () 0 9-1518 NUT, /8-24 Hex Nyloc () 1-51 BRACKET, Gage Wheel (Rear) (2) (28 & Decks) 2 9-01 BOLT, 5/1-18 x 1/2 Carriage () for 28 &, (8) for 0 Deck 9-0 NUT, 5/1-18 Hex Flange Lock (8) for 28 &, () for 0 Deck 4 9-15 SCREW, 1/4-20 x -1/2 Hex Washer Self-Tap (2) 5 9-0492 WING-NUT, 5/1-18 (2) 9-012 BOLT, /8-1 x /4 Hex Flange Lock () 1-98 COVER, 28 Mulcher -- 1-984 COVER, Mulcher 8 9-058 NUT, 1/4-20 Hex Flange Lock Grade 5 (2) 9-4025 BRACKET, Anti-Scalp, 0 R.H. 40-402 BRACKET, Anti-Scalp, 0 L.H. 41-44 BRACKET, Anti-Scalp, 0 L.H. 42-40 BRACKET, Anti-Scalp, 0 R.H. 4 2-45 BLADE, Ninja 28 -- 2-55 BLADE, Ninja 0 -- 2-441 BLADE, Ninja 44 1-980 BLADE, 28 Mulcher -- 1-982 BLADE, Mulcher 45-55 28 BLADE (High Lift) -- 1-809 0 BLADE -- -418 BLADE (High Lift) 4 1-9515 28 BLADE -- 1-952 BLADE R. E. RIDER SERIES 22 MANUAL No. 0128 1
RAILS, LIFT ARMS, CAM LIFT 1 1 2 5 2 9 5 11 12 2 24 1 8 14 4 25 40 2 8 15 18 1 14 22 28 20 19 1 9 1 0 29 2 28 2 21 2 4 CABLE, NO REVERSE IN MOW (SEE PAGE 20, ITEM 11) MANUAL No. 0128 R. E. RIDER SERIES 22 18
RAILS, LIFT ARMS, CAM LIFT 1 9-150 HAIRPIN, /2 X 1-1/2 (2) 2 2-8200 SWIVEL (2) 2-828 HOOK, Chain (2) 4 9-022 NUT, 5/1-24 Hex (2) 5 9-0854 NUT, /8-24 Hex Nyloc 9-0122 WASHER, /8 Flat -421 PIVOT, Leveling 8 5-924 ARM, Rear Lift (weldment) 9 9-048 SCREW, /8-24 X 1-/4 Hex Head Cap Grade 5-200 WASHER, 1/2 Flat (2) 11 4-155 LEVER, Height of Cut 12 9-0289 NUT, /8-24 Hex Center Lock 1 4-159 SPRING, Lever 14 1-208 RING, Blue (2) 15-1855 GUIDE, Belt 1 4-1 SPRING, Assist (2) 1-188 BRACE, Top 18 1-122 ROD, Leveling 19 9-01 SCREW, 5/1-18 x 5/8" Self-Tap 20 5-899 ASSEMBLY, Clutch Plate 21 4-848 RAIL, Deck Lift, Right Hand 22-29 RAIL, Deck Lift, Left Hand 2 4-15 DETENT, Height Adjust 24 9-024 SCREW, /8-1 x 1" Hex Washer Self-Tap (2) 25 4-21 DETENT, Spacer 2 9-1198 SCREW, /8-1 x 5/8" Hex Washer Self-Tap () 2 2-420 GRIP, Height Adjustment Lever 28 1-20 RING, Red (2) 29-299 ARM, Front Lift 0 5-8041 ARM, Front Lift (Weldment) 1 9-05 PIN, 1/8 x /4" Cotter 2 2-21 ROD, Support (Front Lift Arm to Front End) 1-84 SNAP RING, /1 4 9-0858 SCREW, 5/1-18 X 1/2 Hex Washer Self-Tap (2) 5-1920 SPACER, Deck Lift (2) 9-2051 BOLT, #-24 x 1 Flat Head Square Neck 9-1290 NUT, #-24 Hex Nyloc 8-224 ANCHOR 9 9-02 SCREW, 5/1-24 x /4 Hex Head Cap, Grade 5 (2) 40 9-091 WASHER, 5/1 Internal Tooth Lock (2) R. E. RIDER SERIES 22 MANUAL No. 0128 19
BLADE STOP PEDALS 2 9 12 11 1 1 8 5 4 1-2 PEDAL, Blade Stop Control 2-59 SPRING, Latching 1-5448 SPRING, Pedal 4 1-5495 BOLT, /8-24 Shoulder, Grade 5 5 1-544 BOLT, /8-24 x 9/1" Shoulder 1-20 WASHER, Cone 1/2 I. D. 9-0155 NUT, /8-24 Hex, Grade B 8 9-0250 WASHER, 1/2 Flat (2) 9 9-0289 NUT, /8-24 Hex Center Lock 9-1584 NUT, 1/4-20 Hex Flange Lock, Grade 5 11-21 CABLE, No Reverse In Mow 12-21 CLIP, Cable 1 9-1 BOLT, 1/4-20 x /4 Square Neck Carriage, Grade 5 MANUAL No. 0128 R. E. RIDER SERIES 22 20
1 ASSEMBLY SPINDLE 2 5 NOTE: Spindle housing assembly, Part no. 5-09 includes Items 4 and 5. 4 12 12 8 1 9 1 1 5-451 ASSEMBLY, Spindle Housing (Includes Items 2 Thru 1) 2 1-2491 RING, 1.85 Internal Retaining (2) 1-1 BEARING, Spindle (2) 4 4-040 WELDMENT, Spindle Housing 5 1-081 FITTING, Lube (for /1 diameter hole) 4-485 SPINDLE, Rider (.2 overall length) 1-095 WASHER, /4 Shim 8 1-440 WASHER, Spindle 9-51 HOLDER, Blade 4-482 SPACER, Blade Centering 11 9-05 NUT, 5/8-18 Hex Center Lock 12 9-0491 SCREW, 1/2-20 x 1-1/4 Hex Head Cap, Grade 5 (2) 1 9-199 NUT, 1/2-20 Hex Jam (2) R. E. RIDER SERIES 22 MANUAL No. 0128 11 21
BELTS, BRAKES, INTERLOCK 2 1 18 4 5 19 8 24 12 8 9 5 2 24 0 * 29 28 2 2 25 22 21 14 20 14 19 11 1 15 24 1 9 1 2 8 14 * SEE PAGE 18, ITEM 8 1 1 MANUAL No. 0128 R. E. RIDER SERIES 22 4 22
BELTS, BRAKES, INTERLOCK 1 4-844 BELT, Drive (.5 AA Section) (Note: part number appears on belt) 2-44 NUT, /4-1 Hex Jam, Grade 8-202 WASHER, 49/4 I.D. x 1-1/2 O.D. Flat (2) 4 1-881 PULLEY, Spindle 5 1-5290 HUB, Pulley 9-1299 NUT, /8-1 Nyloc (2) 2-924 PULLEY, 4 Idler (2) 8 9-149 SCREW, /8-1 x 1-1/2 Hex Head Cap, Grade 5 (2) 9-528 BRACKET, Fixed Idler -52 BRACE, Fixed Idler Bracket 11 9-0858 SCREW, 5/1-18 x 1/2 Hex Washer Self-Tap (5) 12 4-5 HANDLE, Blade Engage (Flip) 1 1-040 RING, 2 External Retaining (2) 14 9-00 PIN, /2 x /4 Cotter () 15-521 SPRING, Extension, 4 x 1/2 Diameter 1 4-8 ARM, Idler (weldment) 1 1-414 SPACER 18 4-84 GRIP, Handle 19 9-1514 WASHER, /8 Flat (2) 20-58 DRUM, Brake 21 1-404 PIN, 1/4 x 1-5/8 Clevis 22-4852 BAND, Brake 2 9-0122 WASHER, /8 Flat (2) 24 9-0055 WASHER, 1/4 Flat (4) 25 4- EYE-BOLT, 1/4-20 x 4 2 4-48 SPRING, Flip Handle 2 9-194 PIN, /1 x 1 Clevis 28 5-9254 HANDLE, Blade Lever (ON-OFF) (weldment) 29 1-418 SPRING, Blade Handle 0 1-2055 ROD, Idler 1 9-0299 SCREW, #-2 x 1 Hex Washer Self-Tap 2 1-8524 SWITCH, Deck Interlock (NO) -8021 MOUNT, Handle/Switch 4 9-02 SCREW, 1/4-20 x 5/8 Hex Washer Self-Tap (2) 5 9-0555 PIN, /2 x 1/2 Cotter 9-01 NUT, 1/4-20 Hex Top Lock 1-44 BUSHING 8 4-82 SPRING 9-2111 RESTRICTOR, Belt R. E. RIDER SERIES 22 MANUAL No. 0128 2
DRIVE DISC ASSEMBLY 1 2 1-418 WELDMENT, 5.25 O.D. Drive Disc (" Models) - -258 WELDMENT, 5.5 O.D. Drive Disc (28, 0 & 42 Models) 2 9-012 SCREW, /8-1 x /8 Set (2) 1-02 KEY, 1/4 Square x 2 MANUAL No. 0128 R. E. RIDER SERIES 22 24
FUEL TANK & OPERATORS SEAT 1 2 A 1 8 5 4 14 9 12 11 1 2-8595 SEAT, Operator (12, 14.5 & 15HP Models) (shown) -- 2-850 SEAT, Operator (9 & HP Models) (not shown) 2 5-1905 ASSEMBLY, Fuel Tank (9 & HP Models) (Includes Item ) -- 5-245 ASSEMBY, Fuel Tank with Gauge (12, 14.5 & 15HP Models) (Incl. Item A) 1-2515 CAP, Fuel Tank A 1-9 CAP, Fuel Tank (With Gauge) 4-22 HOSE, Fuel (8-1/2" Long) (Briggs & Stratton: 8HP thru 14HP) -- 1-2912 HOSE, Fuel (12-1/2 Long) (Kohler Only!) 5 1-459 FILTER, Fuel (In-Line) 1-2222 CLAMP, Fuel Line (4) - BRACKET, Fuel Tank (Rear) 8 9-1542 SCREW, 5/1-18 x 5/8" Pan Head Self-Tap (Torx #T-40) (2) 9 2-191 KNOB, Seat Adjusting (2) 1-849 SPACER, 5/1 (2) 11 2-450 VALVE, Fuel Shut-Off (Accessory) 12 9-8 BOLT, 5/1-18 x 1/2" Hex Flange Lock w/nylon Patch (2) 1 2-9211 SWITCH, Seat (Normally Closed) 14-51 HOSE, Fuel (-1/2 Long) R. E. RIDER SERIES 22 MANUAL No. 0128 25
ENGINES & EXHAUST MUFFLER ENGINE H.P. START TYPE ENGINE MFGR. MFGR. MODEL MFGR. TYPE 9.0 RECOIL BRIGGS & STRATTON 28B02 1154-E1 14.5 ELECTRIC BRIGGS & STRATTON C.A.R.B. 280 125-E1 15.0 ELECTRIC KOHLER CV15ST PS-41580 12 11 14 1 5 4 2 8 1 9 1 5-199 MUFFLER (B&S 9-12 HP) (Includes items 8 & 9) 2 9-020 SCREW, 5/1-18 x /4 Hex Head Cap, Grade 2 (2) 9-1814 SCREW, 1/4-20x1-1/4 Hex Head Cap 4 1-958 MUFFLER (Kohler 15 HP) 5-445 MUFFLER (B&S 14 HP) 1-849 SPACER (2) 9-5 NUT, 1/4-20 Hex Flange Lock 8 1-925 DEFLECTOR, Heat 9 2-02 SCREW #8-18 x /8 Type AB Modified 9-02 SCREW, 1/4-20 x 5/8 Hex Washer Self-Tap 11 9-1495 SCREW, 1/4-20 x /4 Hex Head Cap, Grade 5 12 1-552 GASKET, Muffler 1 9-1294 WASHER, 1/4 Flat 14 9-0052 WASHER, 1/4 Split Lock MANUAL No. 0128 R. E. RIDER SERIES 22 2
THROTTLE CONTROL 2 4 1 1 2-251 CONTROL, Throttle (2. long) (Briggs Engines) -- -420 CONTROL, Throttle (4. long) (Kohler Engine) 2 9-059 SCREW, 1/4-20 x 1/2 Hex Washer Self-Tap (2) -40 PLATE, Throttle Control 4 9-091 SCREW, #-24 x 1/2 Hex Washer Self-Tap (Torx) (2) R. E. RIDER SERIES 22 MANUAL No. 0128 2
DECALS 2 1 5 4 9 8 1 2-99 DECAL, 28 Inch 2 2-99 DECAL, 0 Inch 2-2991 DECAL, Inch 4-191 DECAL, Snapper 5-4481 DECAL, No Mow in Reverse 2-81 DECAL, Danger (CPSC) 4-218 DECAL, Height Cut 8 2-980 DECAL, Back-up Recoil 9 2-982 DECAL, OHV 2-940 DECAL, Patent Numbers MANUAL No. 0128 R. E. RIDER SERIES 22 28
DECALS 2 4 1 1 4-440 DECAL, Safety Instructions 2 4-20 DECAL, Chute/Deflector Warning 1-591 DECAL, Battery Caution 4-5 DECAL, OPEI, Ride-On 5 2-911 DECAL, Caution, Fuel (English) 1-258 DECAL, Battery 1-14 DECAL, Caution Tag 5 R. E. RIDER SERIES 22 MANUAL No. 0128 29
ELECTRICAL SYSTEMS (For 9HP Briggs Recoil Start) 8 2 TO ITEM 9 TO ITEM 11 5 4 H TO ITEM 1 (D, E, F) G TO ITEM 1 (A) 11 12 1 TO ITEM G MAGNETO SHORTING BLOCK 9 G. MAGNETO SHORTING BLOCK (SEE INSET) H H. ENGINE GROUND MANUAL No. 0128 R. E. RIDER SERIES 22 0
ELECTRICAL SYSTEMS (For 9HP Briggs Recoil Start) 1 2-80INTERLOCK, Module 2 2-88HARNESS, Deck Interlock 1-8524SWITCH, Deck Interlock (NO) 4 9-0880WASHER, 5/8 Internal Tooth Lock 5 1-548NUT, 5/8-2 Hex 1-118KEY, Switch (2) -14HARNESS, Ground (Recoil Start) 8 1-2080TIE, " Long Cable () 9 2-9211SWITCH, Seat (NC) 1-81SWITCH, Ignition (2-Pole) (Recoil Start) 11 2-288SWITCH, Traction Operator s Presence (NC/NO) 12 2-80HARNESS, Operator s Presence Control R. E. RIDER SERIES 22 MANUAL No. 0128 1
ELECTRICAL SYSTEMS (For & 12 HP BRIGGS) 8 2 24 TO ITEM 8 9 J I TO ITEM 2 TO ITEM 1 19 H G TO ITEM (D, E, F) 24 TO ITEM (A) TO ITEM 11 TO ITEM 4 20 1 H L 25 4 14 K L G. MAGNETO SHORTING BLOCK (See Inset, Page ) 21 5 1 11 12 2 L 2 M 15 L H. ENGINE GROUND I. ALTERNATOR CHARGING WIRE J. STARTER TERM INAL H M TO ITEM 5 G K 18 1 22 MANUAL No. 0128 R. E. RIDER SERIES 22 2
ELECTRICAL SYSTEMS (For & 12 HP BRIGGS) 1-05 KIT, 12V Dry Charge Battery 2 1-881 SOLENOID 2-288 HARNESS, Starter Wiring (Briggs) 4-15 HARNESS, Ignition Wiring (Briggs) 5 1-18 HOLDER, Fuse (Includes Fuse) -- 1-19 FUSE ( AMP) 2-80 INTERLOCK Module (Briggs) 2-88 HARNESS, (Deck Interlock Wiring) 8 1-8524 SWITCH, Deck Interlock (NO) 9 1-2444 COVER, Battery Cable 1-92 CABLE, Positive (Red) 11-9 SWITCH, Ignition (Used With Electric Start) 12 9-0880 WASHER, 5/8 Internal Tooth Lock 1 1-548 NUT, 5/8-2 Hex 14 1-118 KEY, Switch (2) 15 9-059 SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap () 1 2-288 SWITCH, Operator Presence Control (OPC) Traction (NC/NO) 1 9-15 NUT, 1/4-20 Hex, Grade 5 or B (4) 18 9-005 WASHER, 1/4 Internal Tooth Lock (2) 19 2-12 SCREW, 1/4-20 x 5/8" Hex Head Cap, Grade 5 (2) 20 2-802 CABLE, Negative 21 2-80 HARNESS, Operator Presence Control Wire 22 9-15 NUT, 1/4-20 Hex, Grade 5 or B 2 1-2080 TIE, " Long Cable (2) 24 9-02 NUT, 1/4-20 Hex Center Lock, Grade 5 or B (2) 25 1-4451 TIE, 2" Long Cable 2 2-9211 SWITCH, Seat (NC) MAGNETO SHORTING BLOCK R. E. RIDER SERIES 22 MANUAL No. 0128
ELECTRICAL SYSTEMS (For 14.5 HP BRIGGS) 25 2 TO ITEM 8 2 TO ITEM 2 24 9 8 J I TO ITEM 1 2 19 2 H G TO ITEM (D, E, TO ITEM (A) 1 24 14 20 H L TO ITEM 11 TO ITEM 4 1 4 1 12 K L H 21 11 5 G. MAGNETO SHORTING BLOCK (See Inset, Page 5) 15 2 L M L 18 H. ENGINE GROUND I. ALTERNATOR CHARGING WIRE M J. STARTER TERM INAL TO ITEM 5 N K TO CARBURETOR SOLENOID 1 22 MANUAL No. 0128 R. E. RIDER SERIES 22 4
ELECTRICAL SYSTEMS (For 14.5 HP BRIGGS) 1-05 KIT, 12V Dry Charge Battery 2 1-881 SOLENOID 2-288 HARNESS, Starter Wiring (Briggs) 4-440 HARNESS, Ignition Wiring (Briggs) 5 1-18 HOLDER, Fuse (Includes Fuse) -- 1-19 FUSE ( AMP) 2-80 INTERLOCK Module (Briggs) 2-88 HARNESS, (Deck Interlock Wiring) 8 1-8524 SWITCH, Deck Interlock (NO) 9 1-2444 COVER, Battery Cable 1-92 CABLE, Positive, 1 long (Red) 11 2-4 SWITCH, Ignition-Afterfire Solenoid 12 9-0880 WASHER, 5/8 Internal Tooth Lock 1 1-548 NUT, 5/8-2 Hex 14 1-118 KEY, Switch (2) 15 9-059 SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap () 1 2-288 SWITCH, Operator Presence Control (OPC) Traction (NC/NO) 1 9-15 NUT, 1/4-20 Hex, Grade 5 or B (4) 18 9-005 WASHER, 1/4 Internal Tooth Lock (2) 19 2-12 SCREW, 1/4-20 x 5/8" Hex Head Cap, Grade 5 (2) 20 2-802 CABLE, Negative (15 ) 21 2-85 HARNESS, Operator Presence Control Wire 22 9-15 NUT, 1/4-20 Hex, Grade 5 or B 2 1-2080 TIE, " Long Cable (2) 24 9-02 NUT, 1/4-20 Hex Center Lock, Grade 5 or B (2) 25 1-4451 TIE, 2 Long Cable 2 1-2485 RETAINER, 1/4 Bolt (2) 2 2-9211 SWITCH, Seat (NC) MAGNETO SHORTING BLOCK R. E. RIDER SERIES 22 MANUAL No. 0128 5
ELECTRICAL SYSTEMS (For 15 HP KOHLER) 24 TO ITEM 2 2 TO ITEM 1 19 2 9 TO ITEM 8 2 25 2 TO ITEM 4 H TO ITEM (D, E, F) TO ITEM (A) 1 G TO ITEM 11 24 20 L I 1 J 5 4 14 L 1 12 H. ENGINE GROUND I. BATTERY GROUND (See Inset, Page ) 21 2 11 M L 15 L 18 G. ELECTRONIC CONTROL UNIT ENGINE J. STARTER 22 MOUNTING TERMINAL PLATE TO ITEM 5 8 MANUAL No. 0128 R. E. RIDER SERIES 22 K H M K 1
ELECTRICAL SYSTEMS (For 15 HP KOHLER) 1-05 KIT, 12V Dry Charge Battery 2 1-881 SOLENOID 1-921 HARNESS, Starter Wiring (Kohler) 4-4405 HARNESS, Ignition Wiring (15HP Kohler) 5 1-18 HOLDER, Fuse (Includes Fuse) -- 1-19 FUSE ( AMP) 2-80 INTERLOCK Module 2-88 HARNESS, (Deck Interlock Wiring) 8 1-8524 SWITCH, Deck Interlock (NO) 9 1-2444 COVER, Battery Cable 1-92 CABLE, Positive (Red) (1 Long) 11-9 SWITCH, Ignition (Used With Electric Start) 12 9-0880 WASHER, 5/8 Internal Tooth Lock 1 1-548 NUT, 5/8-2 Hex 14 1-118 KEY, Switch (2) 15 9-059 SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap () 1 2-288 SWITCH, Operator Presence Control (OPC)Traction (NC/NO) 1 9-15 NUT, 1/4-20 Hex, Grade 5 or B (4) 18 9-005 WASHER, 1/4 Internal Tooth Lock (2) 19 2-12 SCREW, 1/4-20 x 5/8" Hex Head Cap, Grade 5 (2) 20 2-802 CABLE, Negative (15 ) 21 2-88 HARNESS, Operator Presence Control Wire 22 9-15 NUT, 1/4-20 Hex, Grade 5 or B 2 1-2080 TIE, " Long Cable (2) 24 9-02 NUT, 1/4-20 Hex Center Lock, Grade 5 or B (2) 25 1-4451 TIE, 2 Long Cable 2 1-2485 RETAINER, 1/4 Bolt (2) 2 2-9211 SWITCH, Seat (NC) BATTERY GROUND SCREW FRONT VIEW OF ENGINE R. E. RIDER SERIES 22 MANUAL No. 0128
WIRING SCHEMATICS MANUAL No. 0128 R. E. RIDER SERIES 22 8
WIRING SCHEMATICS R. E. RIDER SERIES 22 MANUAL No. 0128 9
WIRING SCHEMATICS WIRING SCHEMATIC FOR 14.5 HP (Briggs Engine) MANUAL No. 0128 R. E. RIDER SERIES 22 40
WIRING SCHEMATICS R. E. RIDER SERIES 22 MANUAL No. 0128 41
HARDWARE BAGS LOCATION -- -182 HARDWARE BAG (includes items listed below) 1 1-24 PLUG, Oil Fill & Check (2)... page 11, item 18 & page 1, item 14 2 1-21 BUSHING, Tie Rod (2)... page, item 12 1-849 SPACER, 21/4 (2)... page 25, item 4 1-82 PIN, 1/4 x 1-1/2 Roll... page, item 5 2-191 KNOB, Three Prong (2)... page 25, item 9 2- FOAM COVER, Steering Shaft... page, item 2 2-1 COVER, Steering Shaft... page, item 2 8 2-895 SPACER, Pivot (2)... page, item 9 2-9211 SEAT SWITCH, Quick Mount... page 25, item 1 9-02 NUT, 1/4-20 Hex Center Lock (2)... pg. 2 & 4, item 24 11 9-8 BOLT, 5/1-18 x 1/2 Hex Flange Lock (2)... page 25, item 12 12 9-151 PIN, 5/2 x 1 Cotter (2)... page, item 11 page, item 41 1 9-029 PIN, /1 x 1 Cotter... page, item 24 14 9-0122 WASHER, /8 Flat (2)... page, item 15 9-091 SCREW, #-24 x 1/2 Hex (Torx) (2)... page, item 4 LOCATION -- -185 HARDWARE BAG (includes items listed below) 1 1-24 PLUG, Oil Fill & Check (2)... page 11, item 18 & page 1, item 14 2 1-21 BUSHING, Tie Rod (2)... page, item 12 1-849 SPACER, 21/4 (2)... page 25, item 4 1-82 PIN, 1/4 x 1-1/2 Roll... page, item 5 2-191 KNOB, Three Prong (2)... page 25, item 9 2- FOAM COVER, Steering Shaft... page, item 2 2-1 COVER, Steering Shaft... page, item 2 8 2-9211 SEAT SWITCH, Quick Mount... page 25, item 1 9 9-02 NUT, 1/4-20 Hex Center Lock (2)... pg. 2 & 4 item 24 9-8 BOLT, 5/1-18 x 1/2 Hex Flange Lock (2)... page 25, item 12 11 9-151 PIN, 5/2 x 1 Cotter (2)... page, item 11 & page, item 41 12 9-029 PIN, /1 x 1 Cotter... page, item 24 1 9-0122 WASHER, /8 Flat (2)... page, item 14 9-091 SCREW, #-24 x 1/2 Hex (Torx) (2)... page, item 4 MANUAL No. 0128 R. E. RIDER SERIES 22 42
NOTES 4
Parts Manual for REAR ENGINE RIDER SERIES 22 SNAPPER REAR ENGINE RIDER ACCESSORIES* PART NO. DESCRIPTION OF KIT MODELS USED ON -051... Wheel Weight (8 Wheels)... All Rear Engine Riders -001... Smooth Start Clutch... All Rear Engine Riders -025... Drive Disc Puller... All RER Aluminum Drive Discs -09... Dump Cart... All Rear Engine Riders -1400... Gauge Wheel... All 28 & Deck Rear Engine Riders -094... Gauge Wheel... All 41 & 42 Deck Rear Engine Riders -0941... Single Bag Catcher... All 25 Deck Rear Engine Riders -0942... Single Bag Catcher... All 2 & 0 Deck Rear Engine Riders -094... Single Bag Catcher... All 28 & Deck Rear Engine Riders -0944... Single Bag Catcher... All 41 & 42 Deck Rear Engine Riders -094... Twin Bag Catcher... All 28 & Deck Rear Engine Riders -1414... Twin Bag Catcher... European 28 & Rear Engine Riders -0945... Twin Bag Catcher... All 41 & 42 Deck Rear Engine Riders -125... Clamshell Catcher... All 28 & Deck Rear Engine Riders -094... Bag-N-Wagon... All 28 & Deck Rear Engine Riders -0948... Thatcherizer... All Series & Newer Riders -094... Wagon Cover... All 28 & Deck Rear Engine Riders -1190... Weight (Front)... All Series & Newer Riders -0959... Dozer Blade ( Blade)... All Rear Engine Riders -05... Tire Chains (Tires-1 x.50-8)... All Rear Engine Riders -058... Tire Chains (Tires-1 x 4.80-8)... All Rear Engine Riders -182... Ninja Recycling (Cover)... All 25 Deck Rear Engine Riders -49... Recycling (Cover)... All 25 Deck Rear Engine Riders -125... Ninja Recycling (Cover)... All 28 Deck Rear Engine Riders -1254... Ninja Recycling (Cover)... All 0 Deck Rear Engine Riders -1255... Ninja Recycling (Cover)... All Deck Rear Engine Riders -1220... Ninja Recycling (Cover)... All 41 & 42 Deck Rear Engine Riders -19... Utility Trailer ( Cubic Feet) -1911... Spiker Aerator ( ) -1912... Dethatcher (40 ) -191... Lawn Sweeper ( ) -1914... Dethatcher Kit (For Sweeper) -1915... Poly Lawn Roller (24 & ) -191... Broadcast Spreader (.5 Feet) *For illustrated parts lists see manual #0-084. COPYRIGHT 2002 SNAPPER INC. ALL RIGHTS RESERVED MANUAL No. 0128 (Rev. 1, 0/0/02) Printed in U.S.A. 44