- Pricelist PRODUCT EACH PAIR STAGE 1 BODY CHASSIS UNIT s unique space frame chassis with body fitted. Doors boot and bonnet all hinged. $12,750.00 STAGE 2 ROLLING CHASSIS with 12 months warranty. 1. Reconditioned front and rear suspension fitted with our own 2. Spax adjustable shock absorbers. 3. Reconditioned front & rear brakes with new brake pads. 4. Serviced differential. 5. Shortened bottom wishbones for rear suspension. 6. Two new half shafts including new universals for rear suspension. 7. Brake lines fitted. 8. Both main fuel line and return line fitted. 9. New front springs and mounting plates. 10. Rolling on a set of LOAN slave wheels. $22,375.00 STAGE 3 AS PER STAGE 2 PLUS THE FOLLOWING :- 1. Steering system fitted: - includes rack & pinion unit, complete with universal joint and splined steering shaft, steering column with indicator unit, and the ignition lock and shroud. 2. Front and rear sway bars fitted. 3. Pedal box fitted complete with brake clutch and accelerator pedals. 4. Rolling on LOAN slave wheels. $25,235.00 STAGE 4 AS PER STAGE 3 PLUS THE FOLLOWING:- 1. Brake booster and master cylinder fitted. 2. Brake lines connected and system bled of air. 3. Clutch master cylinder & flexible hydraulic line fitted. 4. Aluminium dash-board fitted. 5. Hand brake lever & cable fitted to vehicle & connected to rear brakes. 6. Seat frames with head-rests supplied and fitted to vehicle. 7. Fuel tank fitted. 8. Main fuel and return lines fitted. 9. Aluminium boot floor fitted. 10. Fuel cap fitted. 11. Aluminium foot-well cladding fitted. 12. Heat shielding fitted. 13. Boot, bonnet & door locks fitted. $32,445.00 STAGE 5 AS PER STAGE 4 PLUS THE FOLLOWING COMPONENTS:- 1 Windscreen. 2 Windscreen wipers. 3 Windscreen washers. 4 Heater demister. 5 Wiring loom. 6 Bumper bars & over-riders. 7 Radiator. 8 Radiator air ducting. $40,865.00 We can supply a fuel injected 302 Windsor V8 engine running on unleaded fuel with a 5 speed gearbox fitted into the car for POA Price List 1 of 7
BODY CHASSIS ASSEMBLY & ACCESSORIES BODY CHASSIS UNIT $12,750.00 ALUMINIUM HEAT SHIELD & CLADDING Very necessary to keep cock-pit temperatures down. $610.00 BADGES Round. $32.00 BATTERY BOX Fabricated from heavy gauge steel and zinc plated. Or powder coated $120.00 BONNET PARTS Lock - Flush mounted, stainless steel with spare key. $81.00 Bonnet stay assembly $35.00 BOOT PARTS Lock - Just like the original. $71.00 Boot stay assembly $42.00 False Boot Floor p.o.a. BUMPER BARS & OVER-RIDERS Exact copies of the original parts in chrome plated steel. Complete kit consisting of :- One front and One rear bumper bars, Two front over-riders, Two rear over-riders, Set of mounting studs and spacers etc. $1,099.00 AVAILABLE SEPARATELY Front Bumper bar. $220.00 Rear Bumper Bar. $220.00 Front Over-riders $125.00 $250.00 Rear Over-riders $110.00 $220.00 Mounting pins. 4 needed per bumper bar $30.00 STONE GUARDS Specially made in stainless steel to protect the front face of the rear wheel arches from stone chips $395.00 DASHBOARD UNIT A close copy of the original S/C dashboard modified to accept a modern safety collapsible steering column Fabricated in aluminium with glove-box recess. $375.00 Also available with lockable lid. $90.00 A plain dashboard with no glovebox is also available DOOR LOCKS Both door locks complete with handles Modern locks that meet A.D.R. standards $190.00 FUEL FILLER CAP A large polished aluminium quick release fuel cap complements the rest of the original look-alike aquipment on the car. It has been designed to mount on the right hand rear fender. $395.00 HARD TOP HINGES Concealed Bonnet Hinges. $140.00 Concealed Door Hinges $70.00 Concealed Boot Hinges. $110.00 PEDAL BOX Bolts directly to chassis and under-frame. Drilled & studded for mounting brake and clutch master cylinders. Steering column also mounts to pedal box. $505.00 ROLL BAR Steel, Manufactured roll bar with high level brake insert and chromed $475.00 ROLL BAR SINGLE $475.00 SCUTTLE HOOP Designed to simplify mounting of doors & steering column. $175.00 Price List 2 of 7
SEATS Seat Frames Including Head Rest, and adjusting runners for drivers seat. Easily meets required A.D.R. Standard. Manufactured Specially for our car. $660.00 SIDE VENTS Polished Stainless Steel. $250.00 Painted also available. Prepared with a two pack undercoat ready to be painted the same colour as the rest of the car. Exactly like the original. SOFT TOP Requires only one person to assemble. Easily carried in boot. THROTTLE CABLE DRIVELINE ENGINES As the current Australian Design Rules require a motor in any vehicle to run on only non leaded fuel or L.P.G. Gas, the engine we are currently using is the WINDSOR 302 FORD MUSTANG UNIT. A very good and reliable motor, also used in the AUSTRALIAN FORD FALCON sedan. A 5 speed gearbox is available to couple to this engine. Engine mountings GEARBOX MOUNTING TAIL-SHAFT A purpose built tail-shaft designed to mate the Jaguar differential to either a Ford Top Loader or a Borg Warner gearbox. $570.00 WHEELS A wide range of different design road wheels are available. FUEL SYSTEM FUEL TANK alloy & steel POA FUEL PUMPS A high quality fuel pump with a delivery capacity of 30 gallons per hour, enough fuel to keep even the thirstiest V8 in fuel EFI gauge and pump FUEL FILTER A high grade fuel filter is the heart of any fuel system whether its carburrettors or fuel injection. We recommend a CAV unit with a large aluminium sediment bowl ( not glass ). STEEL FUEL LINES Main fuel supply line and fuel injection return line from engine fitted to the chassis. $220.00 CLUTCH SYSTEM CLUTCH MASTER CYLINDER $60.00 CLUTCH SLAVE CYLINDER The above clutch master cylinder and this slave cylinder give the clutch a good solid feel $56.00 CLUTCH HYDRAULIC LINE The right flexible line to do the job. Price List 3 of 7
SUSPENSION BOTTOM WISH BONE AND HALF-SHAFT MODIFICATIONS Bottom wishbones are shortened to suite the narrower track of our vehicle. Brand new half-shafts constructed to suite the new track dimensions fitted with four new universal joints completes the rear suspension. $1,410.00 FRONT AND REAR SUSPENSION All front and rear suspension components required for the kit, including differential, front and rear disk brakes & calipers. Visually checked for soundness, but requiring refurbishment. Rear bottom wishbones & half-shafts require modifying. $1,200.00 SHOCK-ABSORBERS Spax shocker absorbers have been chosen because of their reliability under all operating conditions.they are equipped with adjustment for both ride height and rebound. $350.00 FRONT SPRINGS Designed and manufactured to give a firm sports car ride and minimum body roll. $320.00 Upper and lower spring to shock absorber allow mounting seats to suite SPAX Shock Absorbers. Front Lower Shock Absorber Mounting Plates. $95.00 REAR SPRINGS With the rear suspension there is a choice of two spring $320.00 and shock-absorber combinations. MONO REAR SYSTEM PER WHEEL Designed from experience with our own racing Cobra. Definitely needed on the more competitive drivers vehicle. $320.00 FRONT SWAY BAR Complete with all rubber bushes, mounting plates and extension rods. A must for the handling conscience owner. Manufactured specially for our car. $320.00 REAR SWAY BAR Complete with all rubber bushes, mounting plates and extension rods. Definitely supplements the front sway bar, for a better handling car. $320.00 BALL JOINTS Front upper ball joints per side $92.00 Front lower ball joints per side $79.00 BUSHES Front upper inner bushes ( rubber ) Front lower inner bushes ( rubber ) Front upper inner bushes ( nolathane high performance ) per set Front lower inner bushes. ( nolathane high performance ) per set Price List 4 of 7
STEERING STEERING SYSTEM A heavy duty rack and pinion, with a collapsible steering column coupled together with a splined shaft equipped with two universals joints. Comes complete with indicators, ignition key and steering lock. $1,450.00 STEERING WHEEL A wide range of MOMO or Sportsline steering wheels are available on request. COOLING SYSTEM RADIATOR Specially designed and manufactured radiator with a high efficiency core. The complete cooling system has been designed to keep the engine at its correct operating temperature under all operating conditions. $690.00 RADIATOR HEADER TANK The header tank has been designed to minimize cap blow off caused by water surge. The stand and mounting are an integral part of the design. Powder coated black for better heat dissipation $395.00 RADIATOR COOLING FANS A pair of high efficiency 12 volt cooling fans for the radiator. Needed to keep the engine operating temperature within safe limits when caught up in traffic or during prolonged idling. Wiring diagram supplied $490.00 HEATER DEMISTER Demister system supplied complete with heater core, heater housing with sliding on/off controls, blower and demister ducts. RADIATOR MOUNTING KIT Heavy gauge aluminium mounting plates designed to make radiator servicing easy. $80.00 RADIATOR ( SHROUD ) AIR SCOOP Designed to duct air from the opening in the nose of the car and direct it onto and through the radiator with the minimum loss. Attaches to the aluminium radiator mounting plates and bottom of air intake. Manufactured from aluminium and preshaped for easy installation $310.00 OIL COOLER Designed to fit into lower radiator intake Price List 5 of 7
BRAKE SYSTEM BRAKE BOOSTER AND MASTER CYLINDER The combination of our chosen master cylinder and brake booster gives the driver of gives very brake pedal feel and control under all conditions BRAKE CALIPERS ( FRONT ) Four Spot Calipers we keep a stock of fully reconditoned calipers with new stainless steel pistons. (Exchange) Calipers are available to purchase outright BRAKE CALIPERS ( REAR ) Reconditoned rear brake calipers with new stainless steel pistons. less handbrake assembly. (Exchange) Rear Brake Calipers serviced, fitted with new stainless steel pistons. Complete with Serviced Handbrake assembly. (Exchange) Calipers are available to purchase outright With Handbrake Assembly. ROTORS Front rotors new Rear rotors new Machining BRAKE & HYDRAULIC SYSTEMS The correct length and type of hydraulic brake hoses are important for safety. Two required for front brakes. STEEL BRAKE LINES Steel brake lines, complete with all unions ready to accept hydraulic flexible hoses. Fitted to chassis. $320.00 HAND BRAKE LEVER A standard type handbrake lever with modified mounting lugs to suite our chassis $165.00 HAND BRAKE CABLE $185.00 BRAKE PADS ( Front Four Spot Calipers ) High quality front brake pads. ( H.P. Metal ) $70.00 Standard front brake pads. $55.00 BRAKE PADS ( Front Three Spot Calipers ) High quality front brake pads. ( H.P. Metal ) $85.00 Standard front brake pads $68.00 REAR BRAKE PADS High quality rear brake pads ( H.P. Metal ) $66.00 Standard rear brake pads. $43.00 High quality hand brake pads. $87.00 Price List 6 of 7
INSTRUMENTS, ELECTRICAL, LIGHTS & WIRING GAUGES Full set of instruments electronic speedo, electronic rev-counter oil pressure, oil temperature, water temperature, battery condition, and fuel gauge complete with sender units where required. $1,260.00 SPEEDO Smiths speedo K.P.H. Requires calibration. $200.00 Cable for speedo. TACHOMETER Smiths rev counter calibrated to 8 cylinder. $200.00 COLUMN SWITCH ASSEMBLY $140.00 FRONT & REAR INDICATOR LIGHTS These indicator lights comply with A.D.R. HEAD LIGHT UNIT HEAD LIGHT SURROUNDS $65.00 REAR STOP & TAIL LIGHTS STEERING COLUMN SHROUD $40.00 STOP LIGHT HIGH LEVEL Two types are available. STOP LIGHT HIGH LEVEL - STRIP TYPE We suggest is the better way to go if using a double width roll bar. As it can be fitted into the roll bar and does not look out of place. $80.30 STOP LIGHT HIGH LEVEL - BODY FITTED TYPE Sits on top of the body just in front of the boot lid. WIRING LOOM A high quality wiring harness designed to simply plug into dash and steering column sub looms etc. All relays fuse box etc included. When ordering please state whether the engine is Windsor or Cleveland running on Carrburrettors or Fuel Injection. $875.00 WINDSCREEN AND ACCESSORIES WINDSCREEN A superb reproduction of the original screen and surround in chrome plated brass. The screen is laminated glass and complies with A.D.R. requirements. $1,320.00 Windscreen packing case. $72.00 WINDSCREEN GLASS REPLACEMENT Just the bare glass. $390.00 Windscreen mounting frame hole cover plates. $45.00 WINDWINGS Replica of the original components in chrome plated brass with stainless steel fitment screws. $220.00 SUNVISORS $375.00 WINDSCREEN WIPERS The complete kit includes electric motor unit, wheel boxes, wiper blades and arms. Brand new. $850.00 Price List 7 of 7