PNEUMATIC ACTUATOR SERIES 0045 Valve automation leader HKC HCAG8 Rev.0
Introduction series pneumatic actuators are specifically designed to respond to customers needs on the valve automation market. It provides a wide range of torque outputs to suit quarter turn ball, butterfly, plug valves and dampers for complete valve automation solutions. The latest manufacturing technologies have been used to ensure high quality and long lifecycle of the series. Moreover, our extensive inventory & engineering capabilities allow us to provide reliable and safe product to our customer with satisfaction. Specification Rack & pinion design: 035 to 0 Scotch yoke design:, Single acting or double acting Wide range of torque outputs Pressure range Max. operating pressure: 8 bar Temperature range Standard: 0 to +80 C Option: 35 to +80 C (low temp.) 0 to +50 C (high temp.) Travel angle Standard: 90 ±5 Option: 35 Other travel angles (60, etc.) with travel adjustment Lubrication: All moving parts are lubricated at the factory for longlife cycle of the actuator Mounting standard Top/side: VDI/VDE 3845 NAMUR standard Bottom: ISO 5 standard Valve automation leader HKC
Features Body Extruded aluminum alloy body is anodized inside/outside for corrosion resistance and to reduce friction with the pistons for a long life cycle. Indicator A disc open / close indicator is standard on all models. Travel Stopers External ±5 adjustable travel stops in both open and close positions. End Caps Aluminum diecasting end caps are chromate coated and then polyester powder coated to maximize resistance against potentially corrosive elements. Spring High tensile spring sets are consisted of high strength alloy steel to provide high performance in fail safe and emergency shut down operations. Pinion Shaft Alloy steel pinion is electroless nickel plated in order to reduce friction, to provide maximum wear resistance and to protect against corrosion under severe conditions. Piston Guides Selflubricating (polypropylene + GF) piston guides provide high reliability and stability. Piston Seals NBR rubber pinion seals provide trouble free operation at standard temperature ranges. Optional viton seals are available for higher temperature range and silicon seals are available for lower temperature range. Piston Diecasted aluminum dual pistons are fitted with high quality piston seals and guides, providing high ratio of output torque to input air pressure. All series actuators are designed to provide constant output torque Pneumatic actuator Series
Rack & Pinion Design Torque diagram Torque Torque Start End Torque Start Start End End 0 90 (35 ) Travel Angle 0 90 0 Travel Angle 90 Travel Angle Double acting Single acting Double acting operation A B A Counterclockwise. Apply an air pressure to port A.. Then as the pistons move apart, the drive shaft turns counterclockwise. 3. Air volume exhausts through port B. B Clockwise. Apply an air pressure to port B.. Then as the pistons move inwards, the drive shaft turns clockwise. 3. Air volume exhausts through port A. Single acting operation A B A Counterclockwise. Apply an air pressure to port A.. Then as the pistons move apart, the springs are compressed and the drive shaft turns counterclockwise. 3. Air volume exhausts through port B. Clockwise (on air failure). In the event of an air failure. As the compressed springs push the pistons inwards, the drive shaft tuns clockwise. 3. Air volume exhausts through port A and comes in through port B.. Note: If air fail to counterclockwise is required, the pistons must be inverted. 3 B Valve automation leader HKC
Scotch yoke design Torque diagram Torque Torque Torque Start End Start Start End End 0 90 Travel Angle 0 90 Travel Angle 0 90 Travel Angle Double acting Single acting Double acting operation A B A B Counterclockwise Clockwise. Apply an air pressure to port A.. Then as the pistons move apart, the drive shaft turns counterclockwise. 3. Air volume exhausts through port B.. Apply an air pressure to port B.. Then as the pistons move inwards, the drive shaft turns clockwise. 3. Air volume exhausts through port A. Single acting operation A B A B Counterclockwise. Apply an air pressure to port A.. Then as the pistons move apart, the springs are compressed and the drive shaft turns counterclockwise. 3. Air volume exhausts through port B. Clockwise (on air failure). In the event of an air failure. As the compressed springs push the pistons inwards, the drive shaft tuns clockwise. 3. Air volume exhausts through port A and comes in through port B.. Note: If air fail to counterclockwise is required, the pistons must be inverted. Pneumatic actuator Series 4
Parts and Materials Rack & Pinion Design Part No. Unit Q ty Part Description Material Corrosion Protection Optional Material 3 4 5 6 7 8 Position indicator Position indicator holder Spring clip (pinion) Thrust washer (pinion) Thrust bearing (pinion) Body Bearing (piston back) Piston Polypropylene + GF Polypropylene + GF Polyphthalamide Extruded aluminium alloy Polyphthalamide Die cast aluminium Nickel plated (60, 00) Anodized / hardanodized Anodized / hardanodized 9 0 3 4 5 6 7 8 9 0 3 4 5 6 7 8 8 5 Oring (piston) Bearing (piston head) Cover bolt washer Cover bolt (end cover) Right and left end cover Oring (end cover) Piston guide Oring (pinion top) Bearing (piston top) Thrust bearing (pinion) Open, close cam (stop arragement) Drive shaft Bearing (piston bottom) Oring (pinion bottom) Oring (stop screw) Stop bolt washer Stop nut Stop bolt Spring Spring holder Nitrile (NBR70) Polyphthalamide Die cast aluminium Nitrile (NBR70) Polyphthalamide Nitrile (NBR70) Nylon 46 Polyphthalamide Steel alloy Nylon 46 Nitrile (NBR70) Nitrile (NBR70) High alloy spring steel Polypropylene + GF Chromate + polyester coated Nickel plated Epoxy coated FKM, VMQ FKM, VMQ FKM, VMQ FKM, VMQ FKM, VMQ Recommended spare parts 5 Valve automation leader HKC
Scotch Yoke Design Part No. Unit Q ty Part Description Material 3 4 5 Cylinder body Drive shaft Yoke pin Yoke Bottom spacer Aluminum alloy Steel alloy Steel Steel Nylon 6 7 8 9 0 3 4 5 6 3 Stem bottom bearing Stem bottom Oring Piston Snap ring Roller pin Shaft Snap ring Piston back bearing Hole sealant Top spacer OCT cam NBR Aluminum Steel Steel PTFE NBR Nylon Steel 7 8 9 0 Stem thrust bearing Stem top bearing Stem top Oring Teflon washer Stem thrust washer NBR PTFE Recommended spare parts Part No. Unit Q ty Part Description Material 3 4 5 6 7 8 9 30 3 3 33 34 35 36 37 38 39 40 4 5 3 8 Snap ring Indicator Indicator holder cover Double acting cover Piston Oring Piston head bearing Cover Oring Stop bolt Oring Stop bolt washer Stop bolt nut Stop bolt Inner spring Outer spring Spring bolt Spring retainer Spring Oring Spring washer Spring nut Spring retainer cover Cover bolt Stainless Steel ABS ABS Aluminum NBR PTFE NBR NBR Spring steel Spring steel Aluminum NBR Steel Aluminum Pneumatic actuator Series 6
Performance Data (Rack & Pinion) Double Acting (Torque: Nm) Model 35 turn AIR SUPPLY.5 bar 3 bar 3.5 bar 4 bar 4.5 bar 5 bar 5.6 bar 6 bar 7 bar 8 bar 035D 3.8 4.5 5.3 6.0 6.8 7.5 8.3 9.0 0.5.0 050D 8.3 0.0.7 3.3 5.0 6.6 8.3 0.0 3.3 6.6 063D 5.0 7.9 0.9 3.9 6.9 9.9 3.9 35.9 4.9 47.0 066D 0.9 5. 9.3 33.5 37.7 4.9 46. 50.3 58.6 67.0 075D O 8.7 34.5 40. 45.9 5.7 57.4 63. 68.9 80.4 9.0 088D 46. 55.3 64.5 73.7 83.0 9. 0.4 0.6 9.0 47.0 00D O 68. 8.9 95.5 09..8 36.5 50. 63.8 9. 4.0 5D 07.5 9.0 50.5 7.0 93.5 5.0 36.5 58.0 30.0 344.0 5D O 38.5 66. 94.0.7 49.4 77. 304.8 33.5 387.9 443.3 45D O 7.5 6.0 304.5 348.0 39.5 435.0 478.5 5.0 609.0 696.0 60D 83.7 340.5 397. 454.0 50.7 567.4 64. 680.9 794.4 908.0 80D O 38.8 459.4 536.0 6.5 689. 765.7 84. 98.8 07.9 5.0 00D O 53.7 638.0 744.4 850.7 957. 063.4 69.8 76. 488.8 70.5 0D 586.9 704.3 8.6 939.0 056.4 73.8 9. 408.5 643.3 878. Single Acting (Torque: Nm) AIR SUPPLY.5 bar 3 bar 3.5 bar 4 bar 4.5 bar 5 bar 5.6 bar 6 bar 7 bar 8 bar Spring Actuator Spring 0 90 0 90 0 90 0 90 0 90 0 90 0 90 0 90 0 90 0 90 90 0 Model Set Start End Start End Start End Start End Start End Start End Start End Start End Start End Start End Start End 050S 063S 066S 075S 088S S 05 4.9 3.4 6.6 5. 8.3 6.8 9.9 8.4.6 0. 3..7 4.9 3.4 4.9 3.4 S 06 4.3.5 6 4. 7.7 5.9 9.3 7.5 9..6 0.8 4.3.5 6 4. 5.8 4 S 07 3.6.5 5.3 3. 7 4.9 8.6 6.5 0.3 8..9 9.8 3.6.5 5.3 3. 8.6 6.5 6.8 4.7 S 08 4.6. 6.3 3.9 7.9 5.5 9.6 7.. 8.8.9 0.5 4.6. 7.9 5.5 7.8 5.4 S 09 5.6.9 7. 4.5 8.9 6. 0.5 7.8. 9.5 3.9. 7. 4.5 0.5 7.8 8.8 6. S 0 6.6 3.6 8.3 5.3 9.9 6.9.6 8.6 3.3 0.3 6.6 3.6 9.9 6.9 9.7 6.7 S 7.6 4.3 9. 5.9 0.9 7.6.6 9.3 5.9.6 9. 5.9 0.7 7.4 S 0. 6.6.9 8.3 5..6 8.5 4.9.7 8. D. A TORQUE 8.3 0.7 3.3 5 6.6 8.3 0 3.3 6.6 S 05 9.5 6.6.4 9.5 5.4.5 8.4 5.5.4 8.5 4.4.5 7.4 4.5 8.4 5.5 S 06 8.3 4.9. 7.8 4. 0.8 7. 3.8 0. 6.8 3. 9.8 6..8 9. 5.8 0. 6.7 S 07 7. 3. 0. 6. 3. 9. 6.. 9. 5.. 8. 5.. 8. 4. 34. 30..8 7.8 S 08 9 4.4 7.4 5 0.4 8 3.4 6.4 4 9.4 7.4 33 8.4 3.5 8.9 S 09 0.9 5.7 3.9 8.7 6.9.7 9.9 4.7.9 7.7 5.9 0.7 3.9 6.7 37 3.8 5. 0 S 0.8 7 5.8 0 8.8 3.8 6 4.8 9 30.8 5 35.9 30. 6.9. S 4.7 8.3 7.7.3 0.7 4.3 3.7 7.3 9.7 3.3 34.8 8.4 8.6. S 9.6.7.6 5.7 8.6.7 33.7 6.8 0. 3.3 D. A TORQUE 5 7.9 0.9 3.9 6.9 9.9 3.9 35.9 4.9 47 S 05 3.3 8.9 7.5 3..7 7.3 5.9.5 30. 5.7 34.3 9.9 38.5 34. 7.6 S 06.8 6.5 6 0.7 0. 4.9 4.4 9. 8.6 3.3 3.8 7.5 37 3.7 4. 35.9 4.4 9. S 07 4.5 8.3 8.7.5.9 6.7 7. 0.9 3.3 5. 35.5 9.3 39.7 33.5 48 4.8 6.8 0.6 S 08 3 5.9 7. 0..4 4.3 5.6 8.5 9.8.7 34 6.9 38. 3. 46.5 39.4 9.. S 09 5.6 7.7 9.8.9 4 6. 38. 0.3 3.4 4.5 36.6 8.7 44.9 37 53.3 45.4.6 3.7 S 0 8.3 9.5.5 3.7 6.7 7.9 30.9. 35. 6.3 43.4 34.6 5.8 43 4 5. S.3 5. 5.5 9.4 9.7 33.6 3.9 4.9 3. 50.3 40.6 6.4 6.7 S 7.9 7.3 3..5 40.4 9.8 48.8 38. 8.8 8. D. A TORQUE 0.9 5. 9.3 33.5 37.7 4.9 46. 50.3 58.6 67 S 05 7.6.4 3.4 7. 9..9 34.8 8.6 40.6 34.4 46.3 40. 5. 45.9 7.3. S 06 5.4 7.9. 3.7 6.9 9.4 3.6 5. 38.4 30.9 44. 36.6 49.9 4.4 55.6 48. 0.8 3.3 S 07 3. 4.5 9 0.3 4.7 6 30.4.7 36. 7.5 4.9 33. 47.7 39 53.4 44.7 64.9 56. 4. 5.5 S 08 6.8 6.8.5.5 8. 8. 34 4 39.7 9.7 45.5 35.5 5. 4. 6.7 5.7 7.7 7.7 S 09 0.3 9 6 4.7 3.8 0.5 37.5 6. 43.3 3 49 37.7 60.5 49. 7. 60.8 3. 9.9 S 0 3.8.3 9.6 7. 35.3.8 4. 8.6 46.8 34.3 58.3 45.8 69.9 57.4 34.6. S 7.4 3.6 33. 9.3 38.9 5. 44.6 30.8 56. 4.3 67.7 53.9 38. 4.3 S 36.7.7 4.4 7.4 53.9 38.9 65.5 50.5 4.5 6.5 D. A TORQUE 8.7 34.5 40. 45.9 5.7 57.4 63. 68.9 80.4 9 S 05 7.8 7. 37 6.4 46. 35.6 55.4 44.8 64.7 54. 73.9 63.3 83. 7.5 8.9 8.3 S 06 4..4 33.3 0.6 4.5 9.8 5.7 39 6 48.3 70. 57.5 79.4 66.7 88.6 75.9 34.7 S 07 0.4 5.7 9.6 4.9 38.8 4. 48 33.3 57.3 4.6 66.5 5.8 75.7 6 84.9 70. 03.3 88.6 40.4 5.7 S 08 6 9. 35. 8.3 44.4 7.5 53.7 36.8 6.9 46 7. 55. 8.3 64.4 99.7 8.8 46. 9.3 S 09 3.5.5 40.7.7 50 3 59. 40. 68.4 49.4 77.6 58.6 96 77 4 95 5 33 S 0 37 5.9 46.3 5. 55.5 34.4 64.7 43.6 73.9 5.8 9.3 7. 0.3 89. 57.8 36.7 S 4.7 9.5 5.9 8.7 6. 37.9 70.3 47. 88.7 65.5 06.7 83.5 63.5 40.3 S 57.4 3. 66.6 4.3 85 59.7 03 77.7 69.3 44 D. A TORQUE 46. 55.3 64.5 73.7 83 9. 0.4 0.6 9 47 S 05 4.9 8.8 56.6 4.5 70. 56. 83.9 69.8 97.5 83.4. 97. 4.8 0.7 39.4 5.3 S 06 37.8 0.9 5.5 34.6 65. 48. 78.8 6.9 9.4 75.5 06. 89. 9.7 0.8 33.4 6.5 47.3 30.4 7 Valve automation leader HKC
S 07 3. 4.5 9 0.3 4.7 6 30.4.7 36. 7.5 4.9 33. 47.7 39 53.4 44.7 64.9 56. 4. 5.5 S 08 6.8 6.8.5.5 8. 8. 34 4 39.7 9.7 45.5 35.5 5. 4. 6.7 5.7 7.7 7.7 S 09 0.3 9 6 4.7 3.8 0.5 37.5 6. 43.3 3 49 37.7 60.5 49. 7. 60.8 3. 9.9 075S S 0 3.8.3 9.6 7. 35.3.8 4. 8.6 46.8 34.3 58.3 45.8 69.9 57.4 34.6. AIR SUPPLY.5 bar 3 bar 3.5 bar 4 bar 4.5 bar 5 bar 5.6 bar 6 bar 7 bar 8 bar Spring S 7.4 3.6 33. 9.3 38.9 5. 44.6 30.8 56. 4.3 67.7 53.9 38. 4.3 Actuator Spring S 0 90 0 90 0 90 0 90 0 90 0 90 36.7 0.7 90 4.4 0 7.4 90 53.9 0 38.9 90 65.5 0 50.5 90 4.5 90 6.5 0 Model D. A Set TORQUE Start8.7End Start34.5End Start40.End Start45.9End Start5.7End Start57.4End Start63.End Start68.9End Start80.4End Start9 End Start End 088S 00S 5S 5S 60S 80S 00S 0S S 05 7.8 7. 37 6.4 46. 35.6 55.4 44.8 64.7 54. 73.9 63.3 83. 7.5 8.9 8.3 S 06 4..4 33.3 0.6 4.5 9.8 5.7 39 6 48.3 70. 57.5 79.4 66.7 88.6 75.9 34.7 S 07 0.4 5.7 9.6 4.9 38.8 4. 48 33.3 57.3 4.6 66.5 5.8 75.7 6 84.9 70. 03.3 88.6 40.4 5.7 S 08 6 9. 35. 8.3 44.4 7.5 53.7 36.8 6.9 46 7. 55. 8.3 64.4 99.7 8.8 46. 9.3 S 09 3.5.5 40.7.7 50 3 59. 40. 68.4 49.4 77.6 58.6 96 77 4 95 5 33 S 0 37 5.9 46.3 5. 55.5 34.4 64.7 43.6 73.9 5.8 9.3 7. 0.3 89. 57.8 36.7 S 4.7 9.5 5.9 8.7 6. 37.9 70.3 47. 88.7 65.5 06.7 83.5 63.5 40.3 S 57.4 3. 66.6 4.3 85 59.7 03 77.7 69.3 44 D. A TORQUE 46. 55.3 64.5 73.7 83 9. 0.4 0.6 9 47 S 05 4.9 8.8 56.6 4.5 70. 56. 83.9 69.8 97.5 83.4. 97. 4.8 0.7 39.4 5.3 S 06 37.8 0.9 5.5 34.6 65. 48. 78.8 6.9 9.4 75.5 06. 89. 9.7 0.8 33.4 6.5 47.3 30.4 S 07 3.7 3. 46.4 6.8 60 40.4 73.7 54. 87.3 67.7 0 8.4 4.6 95 8.3 08.7 55.6 36 55. 35.5 S 08 4.4 8.9 55 3.5 68.7 46. 8.3 59.8 96 73.5 09.6 87. 3.3 00.8 50.6 8. 63 40.5 S 09 49.9 4.6 63.6 38.3 77. 5.9 90.9 65.6 04.5 79. 8. 9.9 45.5 0. 68.4 43. 70.9 45.6 S 0 58.5 30.4 7. 44 85.8 57.7 99.4 7.3 3. 85 40.4.3 63.3 35. 78.8 50.7 S 67. 36. 80.8 49.8 94.4 63.4 08. 77. 35.4 04.4 58.3 7.3 86.7 55.7 S 89.3 55.6 03 69.3 30.3 96.6 53. 9.5 94.5 60.8 D. A TORQUE 68. 8.9 95.5 09..8 36.5 50. 63.8 9. 4 S 05 66.5 4 88 63.5 09.5 85 3 06.5 5.5 8 74 49.5 95.5 7 65.5 4 S 06 58.3 8.9 79.8 50.4 0.3 7.9.8 93.4 44.3 4.9 65.8 36.4 87.3 57.9 08.8 79.4 78.6 49. S 07 50. 5.8 7.6 37.3 93. 58.8 4.6 80.3 36. 0.8 57.6 3.3 79. 44.8 00.6 66.3 43.6 09.3 9.7 57.4 S 08 63.4 4 84.9 45.5 06.4 67 7.9 88.5 49.4 0 70.9 3.5 9.4 53 35.4 96 05 65.6 S 09 76.7 3.5 98. 54 9.7 75.5 4. 97 6.7 8.5 84. 40 7. 83 70. 6 8 73.8 S 0 90 4.5 6.5 33 84 54.5 05.5 76 7 9 70 6 3 3 8 S 03.3 49.5 4.8 7 46.3 9.5 67.8 4 0.8 57 53.8 00 44 90. S 38. 79.5 59.6 0 0.6 44 45.6 87 57 98.4 D. A TORQUE 07.5 9 50.5 7 93.5 5 36.5 58 30 344 S 05 86 56.5 3.7 84. 4.5 69. 39.7 96.9 67.4 4.6 95. 5.3.8 8 5.5 S 06 75.5 39.5 03. 67. 3 95 58.7.7 86.4 50.4 4. 78. 4.8 05.8 69.5 33.5 99 63 S 07 65 3.5 9.7 5. 5.5 79 48. 06.7 75.9 34.4 03.6 6. 3.3 89.8 59 7.5 34.4 7.9 5 73.5 S 08 8. 34. 0 6 37.7 89.7 65.4 7.4 93. 45. 0.8 7.8 48.5 00.5 303.9 55.9 3 84 S 09 99.5 46 7. 73.7 54.9 0.4 8.6 9. 0.3 56.8 38 84.5 93.4 39.9 348.8 95.3 48 94.5 S 0 6.7 56.7 44.4 84.4 7.. 99.8 39.8 7.5 67.5 8.9.9 338.3 78.3 65 05 S 33.4 68.4 6. 96. 88.8 3.8 6.5 5.5 7.9 06.9 37.3 6.3 8 6 S 78.8 06.8 06.5 34.5 6.9 89.9 37.3 45.3 98 6 D. A TORQUE 38.5 66. 94.7 49.4 77. 304.8 33.5 387.9 443.3 S 05 35.5 88.5 35.5 88.5.5 75.5 66 9 309.5 6.5 353 306 396.5 349.5 9 8 S 06 8.5 6.5 8.5 6.5 05.5 49.5 49 93 9.5 36.5 336 80 379.5 33.5 43 367 55 99 S 07 0.5 37.5 0.5 37.5 89.5 4.5 33 68 76.5.5 30 55 363.5 98.5 407 34 494 49 80 5 S 08 85.5.5 7.5 98.5 6 4 59.5 85.5 303 9 346.5 7.5 390 36 477 403 06 3 S 09 56.5 7.5 00 6 43.5 59.5 87 03 330.5 46.5 374 90 46 377 548 464 3 48 45S S 0 83 90 6.5 33.5 70 77 33.5 0.5 357 64 444 35 53 438 58 65 AIR SUPPLY S.5 bar 3 bar 3.5 bar 4 bar 0.5 4.5 bar 08.5 545 bar5 97.5 5.6 bar 95.5 346 bar39 487 bar36 558 bar43 83 Spring8 Actuator Spring S 0 90 0 90 0 90 0 90 0 90 0 90 80.5 0 69.5 90 34 0 3 90 4 0 300 90 498 0 387 90 309 90 98 0 Model D. A Set TORQUE Start7.5End Start6End Start304.5End Start348End Start39.5End Start435End Start478.5End Start5End Start609End Start696End Start End S 05 7.7 7.7 8.5 74.5 85. 3. 34 88 398.7 344.7 455.4 40.4 5. 458. 66 S 06 48.7 84.7 05.5 4.5 6. 98. 39 55 375.7 3.7 43.4 368.4 489. 45. 545.9 48.9 99 35 S 07 6.7 50.7 83.5 07.5 40. 64. 97 353.7 77.7 40.4 334.4 467. 39. 53.9 447.9 637.4 56.4 33 57 S 08 60.5 74.5 7. 3. 74 88 330.7 44.7 387.4 30.4 444. 358. 500.9 44.9 64.4 58.4 66 80 S 09 95. 98. 5 55 308.7.7 365.4 68.4 4. 35. 478.9 38.9 59.4 495.4 706 609 99 0 S 0 30 86.7 78.7 343.4 35.4 400. 9. 456.9 348.9 570.4 46.4 684 576 33 4 S 63.7 45.7 30.4 0.4 377. 59. 433.9 35.9 547.4 49.4 66 543 365 47 S 355. 5. 4.9 8.9 55.4 395.4 639 509 399 69 D. A TORQUE 83.7 340.5 397. 454 50.7 567.4 64. 680.9 794.4 908 S 05 4.8 45.8 30.4.4 378 99 454.5 375.5 53. 45. 607.7 58.7 684. 605. 37 58 S 06 9.8 98.8 69.4 75.4 346 5 4.5 38.5 499. 405. 575.7 48.7 65. 558. 78.8 634.8 84 90 S 07 6.8 50.8 38.4 7.4 35 04 39.5 80.5 468. 357. 544.7 433.7 6. 50. 697.8 586.8 850.9 739.9 33 S 08 06.4 80.4 83 57 359.5 33.5 436. 30. 5.7 386.7 589. 463. 665.8 539.8 88.9 69.9 379 53 S 09 5 0 37.5 86.5 404. 63. 480.7 339.7 557. 46. 633.8 49.8 786.9 645.9 940 799 46 85 S 0 96.5 38.5 373. 5. 449.7 9.7 56. 368. 60.8 444.8 755.9 597.9 909 75 474 36 S 34. 68. 47.7 44.7 494. 3. 570.8 397.8 73.9 550.9 877 704 5 348 S 463. 74. 539.8 350.8 69.9 503.9 846 657 568 379 D. A TORQUE 38.8 459.4 536 6.5 689. 765.7 84. 98.8 07.9 5 S 05 38.7 6.7 45 33 53.4 49.4 637.7 535.7 744. 64. 850.4 748.4 956.8 854.8 35 3 S 06 76.7 53.7 383 60 489.4 366.4 595.7 47.7 70. 579. 808.4 685.4 94.8 79.8 0 898. 378 55 S 07 33.7 90.7 340 97 446.4 303.4 55.7 409.7 659. 56. 765.4 6.4 87.8 78.8 978. 835. 9 048 44 98 S 08 98 34 404.4 40.4 50.7 346.7 67. 453. 73.4 559.4 89.8 665.8 936. 77. 49 984.8 504 340 S 09 36.4 77.4 467.7 83.7 574. 390. 680.4 496.4 786.8 60.8 893. 709. 06 9.8 39 35 567 383 S 0 45.7 0.7 53. 37. 638.4 433.4 744.8 539.8 85. 646. 064 858.8 77 07 630 45 S 489. 64. 595.4 370.4 70.8 476.8 808. 583. 0 795.8 34 009 693 468 S 659.8 43.8 766. 50. 978.8 73.8 9 945.5 756 50 D. A TORQUE 53.7 638 744.4 850.7 957. 063.4 69.8 76. 488.8 70.5 S 04 430 3.6 547.4 430 664.7 547.3 78. 664.7 74.3 56.9 S 05 390.8 44. 508. 36.5 65.5 478.8 74.9 596. 860.3 73.6 977.7 83 095 948.4 34.8 96. S 06 35.6 75.5 469 9.9 586.3 40. 703.7 57.6 8. 645 938.5 76.4 056 879.8 73 997. 4.4 35.3 S 07 49.7 4.3 547 34.6 664.4 459 78.8 576.4 899. 693.8 07 8. 34 98.5 369 63 480 74.6 S 08 507.8 73. 65. 390.5 74.6 507.9 860 65.3 977.4 74.7 095 860 330 095 548.5 33.8 S 09 468.6 04.5 586 3.9 703.4 439.3 80.8 556.7 938. 674. 056 79.4 90 06 55 6 67. 353 S 0 49.4 35.9 546.8 53.3 664. 370.7 78.6 488. 899 605.5 06 7.8 5 957.6 486 9 685.7 39. S 65 30. 74.4 49.6 859.8 537 977. 654.3 889. 447 4 754. 43.4 S 585.7 33.6 703. 35 80.5 468.4 937.8 585.7 73 80.5 407 055 8.8 470.7 D. A TORQUE 586.9 704.3 8.6 939 056.4 73.8 9. 408.5 643.3 878. Pneumatic actuator Series 8
Performance Data (Scotch Yoke) Double Acting (Torque: Nm) D Start Run End 4. bar,507 753,3 5.6 bar,009,005,750 7 bar,5,55,87 D Start Run End 4. Bar 3,0,506,6 5.6 Bar 4,07,006 3,498 7 Bar 5,0,509 4,373 Single Acting (Torque: Nm) S AIR TORQUE SPRING TORQUE Start Run End Start Run End 4. bar,4 45 634 678 83 393 5.6 bar,385 537 74,06 446 64 S AIR TORQUE SPRING TORQUE Start Run End Start Run End 4. bar,6 904,66,356 565 780 5.6 bar,769,074,446,045 883,43 Dimensional Drawing (Rack & Pinion) 035 A DETAIL A O BOTTOM, VIEWISO 5 F E Q&L M N R(TAP) DETAIL A C B D 4M5TAP DP0 I&K(TAP) H M6TAP DP S W X G DETAIL A T NAMUR VDI/VDE 3845 Standard Engagement U V DETAIL A NAMUR Mounting for Solenoidvalve Model 035 Flange L (ISO 5) R Q M/N(min) F03/F05 M5/M6 Ø36/Ø50 0/9 Unit: mm A B C D E F G H I K O S T U V W X 6 54 30 4 69 49 5 50 PF /8" 0 4 4 4 6 3 9 Valve automation leader HKC
050 to 0 DETAIL A A O BOTTOM, VIEWISO 5 F E Q&L M DETAIL A C B D N R(TAP) 4M5TAP DP0 H M6TAP DP I&K(TAP) S W X G T U V DETAIL A NAMUR VDI/VDE 3845 Standard Engagement DETAIL A NAMUR Mounting for Solenoidvalve Model 050 063 066 075 Flange L (ISO 5) R Q M/N(min) F03/F05 M5/M6 Ø36/Ø50 4/ F05/F07 M6/M8 Ø50/Ø70 8/4 F05/F07 M6/M8 Ø50/Ø70 8/4 F05/F07 M6/M8 Ø50/Ø70 /7 Unit: mm A B C D E F G H I K O S T U V W X 44 7 4 30 93 73 30 80 PF /8" 0 4 4 4 6 3 63 85 47 38 07 87 30 80 PF /8" 0 4 4 4 6 3 0 85 47 38 07 87 30 80 PF /8" 0 4 4 4 6 3 0 96 53.5 4.5 4 04 30 80 PF /8" 0 4 4 4 6 3 088 00 5 5 45 60 80 00 0 F05/F07/F0 M6/M8/M0 47 08 58.5 49.5 36 6 30 80 PF /8" 0 4 4 4 6 3 Ø50/Ø70/Ø0 /7 F05/F07/F0 M6/M8/M0 68 3 67 56 48 8 30 80 PF /4" 0 4 4 4 6 3 Ø50/Ø70/Ø0 /7 F07/F0 M8/M0 Ø70/Ø0 3/ 36 4 77 64 66 46 30 80 PF /4" 0 4 4 4 6 3 F07/F0F M8/M0/M 347 5 8 69 79 59 30 80 PF /4" 0 4 4 4 6 3 Ø70/Ø0/Ø5 3/ F0/F M0/M 44 7 9 80 09 79 30 30 PF /4" 30 4 4 4 6 3 Ø0/Ø5 36/7 F0/F M0/M 467 90 0 89 6 96 30 30 PF /4" 30 4 4 4 6 3 Ø0/Ø5 36/7 F0/F M0/M 497 06 07 99 5 30 30 PF /4" 30 4 4 4 6 3 Ø0/Ø5 39/36 F4 M6 Ø40 39/36 F4 M6 Ø40 43/36 555 7 6 77 47 30 30 PF /4" 30 4 4 4 6 3 68 36 0 6 86 56 30 30 PF /4" 30 4 4 4 6 3 Pneumatic actuator Series 0
Dimensional Drawing (Rack & Pinion 35 turn) 075D, 00D, 5D, 45D, 80D, 00D A DETAIL A O F E M DETAIL A C B D H M6TAP DP BOTTOM VIEW, ISO 5 Q&L G N R (TAP) 4M5TAP DP0 I&K(TAP) S W X T U V DETAIL A NAMUR VDI/VDE 3845 Standard Engagement DETAIL A NAMUR Mounting for Solenoidvalve Flange L (ISO 5) R Model Q M/N(min) 075D(35 ) F05/F07 M6/M8 Ø50/Ø70 /7 F05/F07/F0 M6/M8/M0 00D(35 ) Ø50/Ø70/Ø0 /7 Unit: mm A B C D E F G H I K O S T U V W X 7 96 53.5 4.5 4 04 30 80 PF /8" 0 4 4 4 6 3 346 3 67 56 48 8 30 80 PF /4" 0 4 4 4 6 3 5D(35 ) 45D(35 ) 80D(35 ) 00D(35 ) F07/F0/F M8/M0/M 453 5 8 69 79 59 30 80 PF /4" 0 4 4 4 6 3 Ø70/Ø0/Ø5 3/ F0/F M0/M Ø0/Ø5 36/7 F0/F M0/M Ø0/Ø5 39/36 F4 Ø40 M6 43/36 545 7 9 80 09 79 30 30 PF /4" 30 4 4 4 6 3 704 06 07 99 5 30 30 PF /4" 30 4 4 4 6 3 77 7 6 77 47 30 30 PF /4" 30 4 4 4 6 3 Valve automation leader HKC
Dimensional Drawing (Scotch Yoke) & (SINGLE ACTING ACTUATOR) 669 (DOUBLE ACTING ACTUATOR) 504 DETAIL A O F E M DETAIL A (DOUBLE ACTING ACTUATOR) 644 (SINGLE ACTING ACTUATOR) 0 C B D H M6TAP DP BOTTOM, VIEWISO 5 G Q&L R(TAP) 4M5TAP DP0 I&K(TAP) S W X T U V DETAIL A NAMUR VDI/VDE 3845 Standard Engagement DETAIL A NAMUR Mounting for Solenoidvalve Model Flange L (ISO 5) R Q M/N(min) F6 M0 Ø65 54/46 F6 M0 Ø65 54/46 Unit: mm B C D E F G H I K O S T U V W X 36 0 6 86 56 30 30 PF /4" 30 4 4 4 6 3 36 0 6 86 56 30 30 PF /4" 30 4 4 4 6 3 Pneumatic actuator Series
Air Consumption Double Acting (90 turn) Model Volume Unit: liter (l) AIR SUPPLY.5 bar 3 bar 3.5 bar 4 bar 4.5 bar 5 bar 5.6 bar 6 bar 7 bar 8 bar 035D 0. 0.7 0.8 0.9.0...3.4.6.8 050D 0.3...4.5.7.8.0..5.8 063D 0.5.8.0.3.6.8 3. 3.3 3.6 4. 4.6 066D 0.5..5.8 3. 3.4 3.7 4.0 4.3 4.9 5.5 075D 0.8.9 3.3 3.7 4. 4.5 4.9 5.3 5.7 6.5 7.4 088D.3 4.7 5.3 6.0 6.6 7.3 8.0 8.6 9.3 0.6.9 00D.8 6.4 7.4 8.3 9. 0..0.0.9 4.7 6.5 5D 3.0 0.7.3 3.8 5.3 6.9 8.4 9.9.5 4.5 7.6 5D 3.8 3.6 5.6 7.5 9.4.4 3.3 5. 7. 3.0 34.9 45D 6.. 5.4 8.5 3.7 34.9 38.0 4. 44.3 50.7 57.0 60D 7.3 6. 9.9 33.6 37.3 4.0 44.8 48.5 5. 59.6 67. 80D. 40. 45.8 5.5 57.3 63.0 68.7 74.4 80. 9.5 0.9 00D 5.4 55. 63.0 70.9 78.7 86.6 94.4 0.3 0. 5.8 4.5 0D 6.0 57.3 65.5 73.6 8.8 89.9 98. 06.3 4.4 30.7 47. D 3.7 49. 56. 63.0 70.0 77.0 84.0 9.0 98.0.9 5.9 D 0.3 7.7 83. 93.4 03.8 4. 4.5 34.8 45. 65.9 86.6 Double Acting (35 turn) Unit: liter (l) Model Volume AIR SUPPLY.5 bar 3 bar 3.5 bar 4 bar 4.5 bar 5 bar 5.6 bar 6 bar 7 bar 8 bar 075D. 4. 4.8 5.3 5.9 6.5 7. 7.7 8.3 9.5 0.7 00D.6 9.3 0.7.0 3.3 4.6 6.0 7.3 8.6.3 3.9 5D 5.5 9.9.7 5.5 8.3 3. 34.0 36.8 39.6 45.3 50.9 45D 9. 3.9 37.6 4.3 47.0 5.7 56.4 6. 65.8 75. 84.5 80D 6.4 58.6 67.0 75.3 83.7 9.0 00.3 08.7 7.0 33.7 50.4 00D.9 8. 93.9 05.6 7.3 9.0 40.7 5.4 64. 87.5 0.9 Single Acting (90 turn) Model Volume Unit: liter (l) AIR SUPPLY.5 bar 3 bar 3.5 bar 4 bar 4.5 bar 5 bar 5.6 bar 6 bar 7 bar 8 bar 050S 0. 0.4 0.4 0.5 0.5 0.6 0.6 0.7 0.7 0.8 0.9 063S 0. 0.7 0.8 0.9.0...3.4.6.8 066S 0. 0.9.0..3.4.5.7.8.0.3 075S 0.3...4.5.7.8.0..5.8 088S 0.5.8.0.3.6.8 3. 3.3 3.6 4. 4.6 00S 0.7.5.9 3. 3.6 3.9 4.3 4.6 5.0 5.7 6.4 5S. 4.3 4.9 5.5 6. 6.7 7.3 8.0 8.6 9.8.0 5S.5 5.4 6. 6.9 7.7 8.4 9. 0.0 0.7.3 3.8 45S.4 8.6 9.8.0.3 3.5 4.6 5.9 7. 9.6. 60S 3...7 4.3 5.8 7.4 8.9 0.6. 5.3 8.5 80S 4.3 5.4 7.6 9.8.0 4. 6. 8.6 30.8 35. 39.5 00S 5.9. 4. 7. 30. 33. 36.0 39. 4. 48. 54. 0S 7.8 7.9 3.9 35.9 39.9 43.8 47.6 5.8 55.8 63.7 7.7 S 5. 8.3 0.9 3.5 6. 8.7 3. 33.9 36.5 4.7 46.9 S 9.6 34.4 39.3 44. 49. 54.0 58.5 63.8 68.7 78.4 88. 3 Valve automation leader HKC
B Weight Rack & Pinion (90 turn) Unit: kg Model Weight Spring (ea) Rack & Pinion (Double Acting, 35 turn) Unit: kg Model Weight 035 0.5 N/A 050. 0.009 063 066 075 088 00 5 5 45 60 80 00.7.4 3. 4.3 6. 9.0.3 4..0 6.5 38.4 0.07 0.0 0.033 0.056 0.078 0. 0.65 0.0 0.359 0.5 0.75 0 46.0 0.88 075D(35 ) 00D(35 ) 5D(35 ) 45D(35 ) 80D(35 ) 00D(35 ) Scotch Yoke Model D S(4. bar) S(5.6 bar) D S(4. bar) S(5.6 bar) 4. 8.8 5.3.9 36.7 49.7 Unit: kg Weight 46. 59.8 64.0 7. 85.9 95.3 Pinion Shaft Star Adapter Unit: mm Model A B C D E A 050 9.5 5 3.5 063 9 4.5 9. 7.5 C 066 4 4 9. 0 D 075 7 5 3..5 088 4 7 9 3..5 00 4 7 9 3..5 5 4 9 9.6 3.5 5 7 3 9.6 3.5 45 7 7 3 36 35.5 E 60 7 30 36 35.5 80 7 36 37 48 39 00 7 36 37 48 39 0 7 36 37 48 43 Pneumatic actuator Series 4
Ordering Code Double Acting Actuator Single Acting Actuator D S( ) Double Acting Configuration Model / Cylinder Diameter 035 / 050 / 063 / 066 / 075 / 085 / 00 / 5 / 5 / 45 / 60 / 80 / 00 / 0 / / Fail Position FC : Fail Close FO: Fail Open Number of spring 05 / 06 / 07 / 08 / 09 / 0 / / Single Acting Configuration Model / Cylinder Diameter 035 / 050 / 063 / 066 / 075 / 085 / 00 / 5 / 5 / 45 / 60 / 80 / 00 / 0 / / HKC Co., Ltd. Seoul Office (Domestic sales) Add. 009hol, 78 beotkkotro, Geumcheongu, Seoul, Korea (085) Tel. +838866 Fax. +838869 Email. hk866@hkcon.co.kr Headquarter / Factory Add. 6, Emtibeui 8ro, Siheungsi, Gyeonggido, Korea (59) Tel. +83488866 Fax. +83488869 / 8696 Email. hkcon@hkcon.co.kr Web. www.hkcon.co.kr Busan Office Add. 043, 4ho, 4 Yutongdanji ro, Gangseogu, Busan, Korea (467) Tel. +85796064 Fax. +857960643 Email. busan@hkcon.co.kr Published product features and data do not express warranty and may be subject to change without prior notice. Valve automation leader HKC