Swing - Out Ball Valves High Technology Valve & Fitting
SWB 30 SERIES SPECIFICATION Pressure Rating up to 000 psig (9 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable leak rate of 0. SCCM. Hydrostatic shell test is performed at.5 times the working pressure. MATERIALS OF CONSTRUCTION 3 5 7 9 0 3 5 7 Component Material Q TY Body End Cap Ball Ball Seal Flange Seal Stem Stem Seal Upper/Lower Packing Packing Gland Handle Nut Disc Spring Stem Nut Handle Locking Device Stem Nut Lock Flange Bolt Flange Nut ASTM A35GR/CFM ASTM A35GR/CFM SS 3 PTFE PTFE SS3 PTFE PTFE STRAIN HARDNED 3
TABLE OF DIMENSIONS SUPERLOK TUBE END CONNECTIONS SIZE / SUPERLOK 30 3/ SUPERLOK SWB SW / SUPERLOK 30 3/ SUPERLOK 303 SUPERLOK A S D L A B P 7. 39.0 7..5 9 75. 7 0 3.0.0 53.0. 0.0 FEMALE PIPE THREAD END CONNECTIONS 30 SWB 30 F 303 30 305 SIZE A S D d L A B P N /.5 N 3/ 39.0 N /.5 N N N 3N 3/ -/ 3.0 53.0 70.0 7.0..0 3.7.5 3.5 9 5.0 7 0.0 7.5 0 5.0.0 3.0 50.0 0.0.5 3 3
SOCKET WELD END CONNECTIONS SIZE A / 30 3/ 39.0 / SWB 30 SW 3/ 3.0 303 53.0 30 / 70.0 305 3 7.0 S.5..0 3.7 D d L L A B P. 7. 3.5 0 9.7 7 7.3 7.5 0 3..0 3.7 0.0.0.5 3 BUTT WELD END CONNECTIONS SWB 30 30 BW 303 30 305 3 SIZE / 3/ / 3/ / A 39.0 3.0 53.0 70.0 7.0 S.5..0 3.7 D d L e A B P...5.7 7.5 9 5.0 5.5.7 7 0.0 7. 7.5 0 5.0.0 33.5 3.0 9.0. 50.0 3. 0.5 3
SANITARY END CONNECTIONS SWB 30 30 303 SA 30 305 3 SIZE / 3/ / A 39.0 3.0 53.0 70.0 7.0 S 9 9 L C d D A B P 9.0 9.5 5. 9 0.0 3. 5. 9 7.0. 50..0 35.0 50. 0 3.0 7. 3.9 OPTIONS ACTUATION We can provide pneumatic actuation package as optional item with following features - Direct mounted actuator - Reducing package devide If you require actuator as option, add A to the end of ordering number Ex)SWB305-SA-3-A BODY CAVITY FILLERS Body cavity fillers are designed to fill the cavity of the valve between the body and ball. Cavity fillers minimize problems with trapped fluid in the valve body that could contaminate the process or prevent smooth operation of the valve. If require body cavity filler as option, add BCF to the end of ordering number Ex)SWB305-SA-3-BCF 5
SWB 30 SERIES SPECIFICATION Pressure Rating up to 3000 psig (0 bar) at 00 (37 ) Temperature Range from -0 (- ) to 50 (3 ) TESTING Each valve is tested with nitrogen at 000 psig (9 bar) to maximum allowable leak rate of 0. SCCM. Hydrostatic shell test is performed at.5 times the working pressure. PRESSURE/TEMPERATURE RATING REINFORCED PTFE SEATS (R-PTFE) : STANDARD Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (- to 37) 00 (5) 50 (5) 50 (7) 00 (93) 500 (03) 50 () 50 (79.) SWB 30 300 () 00 (55.) 350 (7) 50 (3.5) 00 (0) 330 (.7) 50 (3) 00 (.) CARBON / GLASS PTEF SEATS : OPTION Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (- to 37) 500 (7) 50 (5) 30 (7) 00 (93) 70 () SWB 30 50 () 0 () 300 () 0 (5.) 350 (7) 0 (59.) 00 (0) 0 (33.0) 50 (3) 00 (.) To order option item, add C to the end of ordering number.
PRESSURE/TEMPERATURE RATING PEEK SEATS : OPTION Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (- to37) 3000 (0) 50 (5) 0 () 00 (93) 70 () SWB 30 50 () 770 () 300 () 00 (0) 350 (7) 30 (9.5) 00 (0) 0 (.) 50 (3) 00 (55.) To order option item, add P to the end of ordering number. VIRGIN PTFE SEATS : OPTION Pressure - Temperature Rating Temperature ( ) Working Pressure psig (bar) -0 to 00 (- to 37) 500 (03) 50 (5) 500 (03) 00 (93) 500 (03) SWB 30 50 () 50 (79.) 300 () 00 (55.) 350 (7) 50 (3.5) 00 (0) 330 (.7) 50 (3) 00 (.) To order option item, add V to the end of ordering number. MATERIALS OF CONSTRUCTION Component Valve Body Materials Material / ASTM Specification 3 5 7 9 Body Ball Support ring Seats Seat spring Flange seal Flange Stem Stem bearing CFM / A35 SS 3 / A79 SS 3 / A79 Reinforced PTFE Strain Hardned 3 SS / A0 PTFE CFM / A35 or SS 3 / A79 SS 3 / A79 Alloy X750 0 Lower packing Upper packing Reinforced PTFE 3 5 7 9 0 Packing support Packing gland Stem spring Packing nut Stem nut lock Handle Locking device Tooth washer Flange bolt Flange nut PEEK SS 3 / A79 Strain Hardned 3 Stainless Steel Q TY 7
TABLE OF DIMENSIONS SUPERLOK TUBE END CONNECTION SWB30 M M 0M S SWB30 M Orifice in. (mm) 0. (.) 0. (7.) 0. (.) 0.50 (.) 0. (7.) 0. (0.) 0.5 (3.) 0. (0.) Cv. 3...5 3. 7.5 3. 7.5 End Connection / Superlok 3/ Superlok mm Superlok mm Superlok 0mm Superlok / Superlok 3/ Superlok mm Superlok A B C D E F H Superlok SWB303 0.75 (.) 0.0 79.0.0 3.7.35 3.0.9 9. 5M 5mm Superlok 7.7. 33.0.5 0. 03. 0.0 5.90.75.5 3.. 57..0 FEMALE PIPE THREAD END CONNECTIONS SWB30 SWB30 F N N R N N R N Orifice in. (mm) 0. (7.) 0.5 (3.) Cv 3..0 End Connection / Female NPT / Female NPT / Female PT 3/ Female NPT / Female NPT / Female PT 3/ Female NPT N Female NPT SWB303 0.75 (.) 0.0 79.0.0 9.0.0 3.0.9 9. R 3/ Female PT R Female PT 7.7. 33.0.5 55..9 A B C D E F H 7.70 3.5.75.5 3.. 57..0
TABLE OF DIMENSIONS SOCKET WELD END CONNECTIONS Orifice in. (mm) Cv End Connection d B A B C D E F H K T 0. (.). / Soket Weld.50 3.70 7. SWB30 7.7 33.0 55. 7.70.75 3. 57. T 0. (7.) 3. 3/ Soket Weld 9.70 7.0 7.9 T 0. (0.) 7.5 / Soket Weld.90.30 9.7 SWB30 T 0.5 (3.) 3. 3/ Soket Weld 9.0.70..5.9 3.5.5..0. SW P 0.5 (3.) 5.0 / Soket Weld.0 3.0 9.7 T 0.0 Soket Weld 5.5 33.0.0 SWB303 P 0.75 (.) 3.0 3/ Soket Weld 7.0. 79.0.0 9.0.00 3.00.9 9..7 P.0 Soket Weld 33.90 5.30 BUTT WELD END CONNECTIONS SWB30 P SWB30 P SWB303 P SWB303 P SWB30 P SWB30 P BW SWB303 P SWB303 P SWB30 P SWB30 P SWB30 P SWB30 P SWB303 P Orifice in. Schedule Cv End Connection (mm) 0. (.) 0.5 (3.) 0 0.75 (.) 0. (.) 0.5 (3.) 0 0.75 (.) 0. (.) 0. (7.) 0 0. (0.) 0.5 (3.) 0.75 (.). / Butt Weld 5.0 / Butt Weld 3.0 3/ Butt Weld 0.0 Butt Weld. / Butt Weld 5.0 / Butt Weld 3.0 3/ Butt Weld 0.0 Butt Weld. / Butt Weld 3. 3/ Butt Weld 7.5 / Butt Weld 3. 3/ Butt Weld 0.0 Butt Weld d 0.0 7.0.5 7.90 9.0 5.0 0.93.0 7.70 0.70 3.90.0 3.90 B A B C D E F H 3.70.30 7.7. 33.0.5 5..9.0 3.5.75.5 3.. 57..0.7 9.0.00 79.0.0 33.0.9.5 3.0.9 9. 3.70.30 7.7. 33.0.5 5..9.0 3.5.75.5 3.. 57..0.7 9.0.00 79.0.0 33.0.9.5 3.0.9 9. 3.70 7.0.30.70 7.7. 33.0.5 5..9.0.75 3.5.5 3.. 57..0 33.0 79.0.0.9.5 3.00.9 9. 9
BALL VALVE 0 SERIES SUPERLOK TUBE FITTINGS INSTRUMENTATION, HIGH PRESSURE AND TEMPERATURE, CRYOGENIC SERVICE : 9000 psig @00 F(3 C) : -35 F(-9 C) TO 00 F( C) BITE TYPE TUBE FITTINGS (DIN 353) HYDRAULIC, PNEUMATIC, LUBRICATION : 00~30 barg @00 F(3 C) : 00 F(7 C) MULTI-PURPOSE, PNEUMATIC SYSTEM : 000 psig @70 F( C) : -5 F(-5 C) TO 50 F(3 C) BALL VALVE 30 SERIES HIGH PRESSURE INSTRUMENT LINES : 0000 psig @70 F( C) : - F(-30 C) TO 5 F(30 C) PLUG VALVES INSTRUMENT THREAD FITTINGS INSTRUMENTATION, GENERAL SERVICE : 0000 psig @00 F(3 C) : -35 F(-9 C) TO 00 F( C) INSTRUMENT AIR LINE, PILOT PLANT : 3000 psig @70 F( C) : -0 F(-3 C) TO 00 F(0 C) MANIFOLD VALVES 0 BALL VALVE 0 SERIES INSTRUMENT AIR LINE, REFINERY PILOT PLANT : 500 psig @70 F( C) : 50 F(0 C) TO 50 F(5 C) PRESSURE & DIFFERENTIAL PRESSURE INSTRUMENTATION : 000 psig @00 F(3 C) : -5 F(-5 C) TO 50 F(3 C)
TOGGLE VALVES INTEGRAL BONNET NEEDLE VALVES GENERAL SERVICE, INSTRUMENT ISOLATION : 5000 psig @00 F(3 C) : -5 F(-5 C) TO 50 F(3 C) INSTRUMENT LINE : 300 psig @00 F(3 C) : -0 F(- C) TO 00 F(93 C) QUICK CONNECTS UNION BONNET NEEDLE VALVES HIGH TEMPERATURE AND PRESSURE : 000 psig @00 F(3 C) : -5 F(-5 C) TO 00 F( C) INSTRUMENT LINE : 3000 psig @70 F( C) : -0 F(-3 C) TO 00 F(0 C) DOUBLE BLOCK & BLEED VALVES CHECK VALVES INSTRUMENT LINES : 3000 psig @70 F( C) : -0 F(-3 C) TO 375 F(9 C) PRIMARY ISOLATION, SAMPLING, CHEMICAL INJECTION : CLASS500 (000 psig) @00 F(3 C) : -5 F(-5 C) TO 00 F(0 C) WITH PEEK SEAT VACUUM CLAMP SWING-OUT BALL VALVES VACUUM LINES INSTRUMENT AIR LINE, OIL & GAS PRODUCTION : 3000 psig @00 F(3 C) : -0 F(- C) TO 50 F(3 C)