SALE PROPOSAL ROBBINS TBM UG1B-JAIPUR

Similar documents
1. Tunnel boring machine general... II Tunnel boring machine... II Tunnel... II Segments... II - 4

Use of Two Novel Hybrid-Type Crossover TBMs for Hard Rock Conditions with Water Inflows

TAC Backfill Grout Injection. Two Component Backfill Grout Injection

Multi Mode TBMs. OCT 4 6, 2015 Queens University Kingston, ON Canada Challenges and Innovations in Tunnelling

Mast Height ft (45.0 m) Free Working Height 98.4 ft (30.0 m) Mast Base 21.3 ft (6.5 m) x 24.6 ft (7.5 m)

Overburden drilling catalogue

Easer L. Mobile raiseboring machine for drifts and tunnels from 5.0 m x 5.0 m

EN TRA ENGINEERING AND TRADING SRL

Charmec MF 605 DA. Features. Technical data sheet USA & Canada

SD Series. SD, SDA, SDL Series Heavy Duty Submersible Dewatering and Drainage Pumps 415V. Dewatering Pumps. 3 Year Warranty!

Multimec SF 060. Features. Technical data sheet AUSTRALIA

MODEL Kg H x W x L mm LM/HM kw CODE PRICE

Features of the LM Guide

10-25J-00 SRM-261T 1 INTRODUCTION. Reference No J-00 ISSUED:

Typhoon L Series CNC Turning Centres

VDD 200 Super Single Rig - Automated Pipehandling System

CNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS

DUMPER. Data Book 50 Hz

VDD 370 Super Single Rig - Automatic Pipehandling System

Charmec MC 605 D(V) Features. Technical data sheet AUSTRALIA

DUMPER. Data Book 50 Hz

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive

ZAXIS-5 series SUPER LONG FRONT. ZX85US-5B 34.1 kw (45.7 HP) kg. Model Code Engine Rated Power Operating Weight

DUMPER. Data Book 50 Hz

Excavators. Mini/Midi

Spraymec MF 050 VC. Features. Technical data sheet AUSTRALIA

Charmec MF 605 DA. Features. Technical data sheet

The Singareni Collieries Company Limited (A Government Company) KOTHAGUDEM COLLIERIES Khammam District, Andhra Pradesh, (India)

VDD 400 Offshore Super Single - Automated Pipehandling System

Semmco Alpha 30. Features. Technical data sheet

General Catalog. A New Vision for Quality Pumps. General Catalog

Utimec LF 600 Transmixer

ZERO BACKLASH GEARING

- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403

DC DRUM CUTTER. Your choice for rock or concrete wall and surface profiling, trenching, frozen soil or rock excavation and demolition.

Semmco Alpha 30. Features. Technical data sheet

MIXING CENTRE FOR DELIVERY OF CELLULAR CONCRETE

Charmec LC 605 D(V) Features. Technical data sheet AUSTRALIA

SMALL CONSTRUCTION EQUIPMENTS

F R E S E I D R A U L I C H E

Multimec MF 100. Features. Technical data sheet USA & Canada

Spraymec 8100 VC. Features. Technical data sheet AUSTRALIA

Utimec SF 060 Material

- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403

HFP Series. Specifications. Switch specifications. Wide parallel hand Double acting. Operational stroke length: 20, 30, 40, 60mm.

AEROMAT. Dimensions, single-row design, machine attached to rear wall. Connection values. Dimensions and connection values. electrically-heated

Charmec MC 905 DA short end AUSTRALIA

DWK.E D.R

HPM 250 DRILLING RIG PRESENTATION HPM 250. HPM 250 Short Mast

Utimec LF 600 Agitator

PROFIMAT MT. Profile grinding with increased profitability. More than Precision

Typhoon B Series CNC Turning Centres

The most complete line of drilling rigs...

EC380EHR, EC480EHR VOLVO EXCAVATORS

Robbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter

Robbins 91/123. Large-size raise boring machines for holes ranging from 2.4 to 6.0 m (8-20 ft.) in diameter

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp)

ROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.

Uniport CNC Portal Machining Centre with Pallet Changer.

Iveco Cursor kW (463 HP) Automatic kg kg (40 Sht)

CONTINUOUS FLIGHT AUGERS AND BITS

ZAXIS. 210/210LC-5 n 119 kw (159 hp)

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp)

Cut-to-size saw fh6 430 / 160 Auto load

Section 25 Project Surplus Packages - Sales Item

SERVICE DATA TRIMMER/BRUSHCUTTER KIORITZ CORPORATION F-00 SRM-260 SRM-261 Series 1

Rated output 5,6 kw 5,6 kw. Max power consumption 6,7 kw 6,7 kw. Shaft speed 2890 RPM 2890 RPM

GRUNDFOS PRODUCT GUIDE. Redi-Flo3 and CU 300. Environmental Pumps 60Hz

Advanced Foundation Technology and Equipment

10.5 gal. Vertical Oil Lubricated Air Compressor

JUNG PUMPEN COMPLI 100 MC SEWAGE LIFTING STATIONS

CH 650. Self-Erecting Hydraulic Piling Rig. High Tech Line

ADT 40. Articulated Dumper 6x6 ENGLISH Engine Power Transmission G.V.W. Payload Body struck Body heaped (SAE 2:1)

ROBBINS 53RH C. Low-profile raise drill for holes ranging from 1.2 to 2.4 m (4-8 ft.) in diameter

Utimec LF 700 Agitator

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0

5" SUBMERSIBLE PUMPS. by Franklin Electric

SERVICE DATA. SRM-230U (Serial number : ~ ) SRM-231U (Serial number : ~ ) TRIMMER/BRUSHCUTTER KIORITZ CORPORATION

2CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page

AUGER BORING PRODUCT TOOLING

Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump

BEV. Deep well vertical pumps. 3. Design. 1. Fields of Application. 4. Designation. 2. Operating Data

INTRODUCTION. Reference No S-01 REVISED:

ACF5. Std Line. Product Description. Max differential pressure: 16 bar Circulation, lubrication and transfer ACF GB

EC380EHR, EC480EHR, EC750EHR. Volvo Excavators

EBARA Submersible Propeller Pumps Contents Project: Model: Chk d: Date: Model

5200 ITH Specifications and Features

MET-TECH Product Data Sheet REBAR PRODUCTION LINE MM - DIA MM - L= 6-14 M

Features of the LM Guide

Grout pumps and dosing systems - for grouting with 2 components

Company name: Created by: Phone: Note! Product picture may differ from actual product

SALE PROPOSAL CASTING YARD EQUIPMENTS

EQUIPMENT ENGINE HYDRAULIC SYSTEM

BELL BOOSTER STATIONS 16 Main Specifications INDEX

DYNATECH INDUSTRIES PVT LTD

Right rotation. Left rotation

Utimec LF 700 Agitator

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

UNIVERSAL PRODUCT LINE: STAINLESS STEEL NON-JACKETED PUMPS TABLE OF CONTENTS SERIES DESCRIPTION RELATED PRODUCTS OPERATING RANGE:

Transcription:

SALE PROPOSAL ROBBINS TBM UG1B-JAIPUR

INDEX Sl No Description Remarks 1 Index 2 Specification of TBM- Robbins 3 List of Rolling Stock attached to TBM & Other Equipments

SPECIFICATION OF TBM ROBBINS

f 6550 EARTH PRESSURE BALANCE TBM Make : ROBBINS YEAR OF RE-MANUFACTURE - 2014 1 DESIGN CONDITION General Condition Project Name East-West Corridor of Jaipur Metro (Phase-1B) at Jaipur India Site Location Number of TBMs 2 Total distance bored by TBM Badi Chouper and reversal line by Shield TBM, Underground Metro Stations as Choti Chouper by Cut & Cover Method on East-West Corridor of Jaipur Metro (Phase 1B) at Jaipur, Rajasthan 1) 1875 meter @ after Refurbishment. 2) 1875 meter @ after Refurbishment. 1.1 Geotechnical Condition Type of ground Overburden Mucking Type Clay, Silty Sand, Silty Sand with Clay and Gravel, Gravity Sand, Silty Sand with Gravel: Most above the water table 13.5 m Approximate (to rail level) Muck Cars Max. Water Level Soil Condition Silty Sand with Clay 1.2 Alignment Condition Tunnel Length Approx. 3600m( 2 TBM's ) Maximum tunnel to be continuously bored 1875 m Minimum Curve Radius a) Horizontal 125 mr b) Vertical 1000 mr Tunnel Depth (Max) 25 m 1.3 Tunnel Segment Lining Condition Type Number of Segments Segment Outer Diameter Segment Inner Diameter Length Thickness Segment Width Key Insertion Stroke Max. Segment Weight 2 Technical Specification 2.1 TBM Salient Features TBM Type Min. Horizontal Curve Radius Min. Vertical Curve Radius Pre-cast Concrete Segments 5 + 1 (key) ɸ 6350 mm ɸ 5800 mm 1200 mm 275 mm 1200 mm 500mm 30kN Earth Pressure Balance Machine 125 mr 1000 mr 2.2 Shield Forward Shield Outer Diameter ɸ 6520 mm Rear Shield Outer Diameter ɸ 6520 mm Rear Shield Inside Diameter ɸ 6400 mm Tail Clearance (in radius) 25 mm Shield Body Front Port Diameter 50 mm Quantity 16 Periphery Port Diameter 50 mm Quantity 6

f 6550 EARTH PRESSURE BALANCE TBM Make : ROBBINS YEAR OF RE-MANUFACTURE - 2014 2.3 Cutter Head Type Spoke Type Spokes Number 6 units Excavation Diameter ɸ 6550 mm Opening Ratio (approx.) 0.6 Soft Ground Cutting Tools Knife bits Tungsten Carbide Inserted type Wear Detectors Yes Over Cutter Type Hydraulic Cylinder Activated Drug bit type over cutter Over Cut 100 mm from forward Shield Quantity 1 2.4 Cutter Head Drive Driving Method Electric Drive, Bi-Directional, Electric Maximum Operating Cutter head Thrust 14500 kn Total Power 810 kw Number and unit power of drive motors 9 x 90 kw Speed 0-3 rpm Cutter Head Torque 5148 knm @100% Exceptional Torque 6178 knm @120% Main Bearing Type 3 axis, roller bearing Lubrication Re-Circulated Oil, Monitored and Filtered Seals Multi row lip seals Dynamic Pressure Ratting 5 bar Main Bearing Lube Type ISO VG 220 2.5 Thrust System Total Thrust (Max.) Number of Cylinders Stroke of Cylinders Speed (in case all cylinders are extended with full thrust)) Stroke Sensors Number of Groups Steering 2.6 Articulation System Type Articulation Angle Designed Horizontal Curve (Radius) Correction Curve (Radius) Total Thrust (Max.) Number of Cylinders Stroke of Cylinders Stroke Detectors 32000 kn 16 nos. 1750 mm 70mm/min 4 nos. 4 nos. Active ±1.5 (left & right). ±0.5 (up). 280m 250m 32000 kn 12 units. 250 mm 4 no 2.7 Screw Conveyor Type Shaft Type Drive Type Hydraulic Casing Internal Diameter ɸ 900 mm Speed 0-13.8 rpm Shaft Diameter ɸ 245 mm Working Torque 93 knm Max. Torque 105 knm Discharging Earth Volume 292 mᵌ/hr(n=100%) Retractable Yes Screw Slide Stroke 450 mm Injection Ports 2 Maintenance Windows 2 Pressure Sensors 2 (fwd and reverse)

f 6550 EARTH PRESSURE BALANCE TBM Make : ROBBINS YEAR OF RE-MANUFACTURE - 2014 Bulkhead Gate Guikkotine Type Rear Gate Guikkotine Type Rear Gate Opening Sensors Yes Rear Gate Emergency closers Hydraulic Accumulator Port Diameter ɸ 50 mm Quantity 3 2.8 Bulkhead Port Diameter (Outer Area) ɸ 50 mm Quantity 14 nos. Port Diameter (Inner Area) ɸ 25 mm Quantity 4 Probe Drill Type Hydraulic - Rotary Location Fit to Segment Erector Probe Drilling Ports Located in Shield Body Tail Sealing 3 rows of wire brush 1 row of extruder spring plate 2.9 Tail Seal Grease First Fill Grease Operation Type Pump Mapeblox PKG or Equivalent Mapeblox T or Equivalent Pneumatic 2.10 Segment Erector Type Rotary, Fixed Pick-up Mechanical Grip Rotation Angle ±200 Rotation Speed 0.71-1.42 rpm Degree of Freedom 6 Radial Stroke (in/out) 650 mm Axial Stroke (fwd and reverse) 600 mm Control Radio Control Box, Wired for Emergency Segment Feeder Capacity 1 Ring 2.11 Man Lock Manlock +Material Lock Type Double Chamber Working Pressure 3 bar Main Chamber Capacity 4 persons Head Clearance 1600 mm Length 1540 mm Sub Chamber Head Clearance 1600 mm Length 1000 mm Access Chamber Capacity 4 persons ( Sub chamber ) Air Filters and Regulators Not Included (Supplied by CEC) Breathable Air Supply Not Included (Supplied by CEC) Dimensions I.D. Ø1706 mm & Length 2950 mm long 2.12 Back-Up System Type Of Gantry No of Gantry Total Length 2.13 Back-up Conveyor Width Capacity Speed Belt Weigh System Quantity Open Style, Rolling on Rail 5 nos. 60 m (approx.) 900 mm 450 TPH 1.5 m/s Included 2 nos.

2.14 Backfilling System Hydraulic Power Unit Reservoir 4 mᵌ Type HFDU Viscosity TBD Filtration Unit Included Backfill Grouting Type Tail Plate Internal Plate Port Diameter 40 x 65 mm Quantity 4+4 Spares Injection Valve Electric Valve Liquid 2 Liquid type A-Liquid System Tank 6 mᵌ Pump Type Peristaltic Pump Capacity 18 mᵌ/hr Quantity 4 B-Liquid System Tank 2 mᵌ Pump Type Peristaltic Pump Capacity 1.8 mᵌ/hr Quantity 4 Foam System Agent Pump Flow Maximum 15 l/min Quantity 1 Located on Back-up Water Pump Flow Maximum 100 l/min Quantity 1 Foam Generator Quantity 5 Bentonite System Reservoir Tank Capacity 5 mᵌ Quantity 1 Pump Flow 10.2 mᵌ/hr Pressure Maximum 2 MPa Quantity 2 Installed System 45 kw Mixing System Not Included (at portal by customer) f 6550 EARTH PRESSURE BALANCE TBM Make : ROBBINS YEAR OF RE-MANUFACTURE - 2014 Control Cabin Touch Screen Monitor Air Conditioned Sound Proof Yes Yes Yes 2.15 Dewatering System Dewatering Tank Capacity 4.5 m³ Discharge Pump Type Submersible Capacity 4 l/s at 15 m Power 3.7 kw Quantity 2 2.16 Ventilation System Duct Cassette /Duct Extender Type Tunnel Air Duct Diameter Storage Capacity Secondary Ventilation Duct Diameter Fan Reversible Capacity Not Included - Supplied by CEC Cassette 1000 mm 150 m 600 mm Yes 6 mᵌ/s

f 6550 EARTH PRESSURE BALANCE TBM Make : ROBBINS YEAR OF RE-MANUFACTURE - 2014 2.17 Greasing System Type Pump Seal Grease Type Pump 2.18 Electrical System High Voltage Supply Power Circuit Control Unit Lighting Fluorescent Lights Emergency Lights Transformer Type Transformer Capacity Power Voltage HV. Cable Type HV. Cable Storage Capacity (Cable excluded) 2.19 Safety Systems Gas Detecting System Included Gas to Detect Emergency Stop Fire Detection & Alarm System CCTV System Communication 2.20 Guidance System Tunnel Guidance System Ring Calculation Data Logger Mapeblox H or Equivalent Pneumatic Mapeblox EP1 or Equivalent Pneumatic 6600 kv 400V AC, 50Hz, 3 phase 230V AC, 50Hz, 1 phase 24V AC 230V AC, 50Hz, 1 phase 20 W x100 AC as needed Battery Power as needed Air Cooled Open Type 2000 kva 6600 KV / 400V Cable Real 200 m Included O2/CO/CO2/NO2/H2S/CH4 Located at Operator Stations and other Locations as needed Included 1 Monitor and 4 cameras Loud Speaker phone PPS or Equal Yes Yes

ROLLING STOCK & OTHER EQUIPMENTS

CEC Rolling Stock Associated to the TBM / Other Equipments Sl No Asset / Materials Name of Equipment Qty in Nos Date of Acquisition Location Remarks 1 Assets Bentonite Silo 30 Ton/NMF 1 2015 Jaipur 2 Assets Locomotive - Battery Operated 5 2007 Jaipur 3 Assets Muck Car with trolley 8 2015 Jaipur 4 Assets Flat Car 2 2015 Jaipur 5 Material Segment Car 4 2007 Jaipur 6 Assets 7 Assets Segment Mould (Make -CBE) ( OD6350 +ID 5800 + Width 1200+Thk 275mm Segment Mould (Make -CBE) ( OD6350 +ID 5800 + Width 1200+Thk 275mm 4 2014 Jaipur 4 2015 Jaipur 8 Assets Segment Vaccum lifter 1 2012 Jaipur 9 Assets Turning Table 2 2012 Jaipur