DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO from 0... 00 mbar up to 0... 0 bar Output signals -wire:... 0 ma / -wire: 0... 0 V Special characteristics hygienic process connections, EHEDG-conformity reduced oil volume, minimises temperature influence at zero point CIP / SIP cleaning up to 50 C vacuum resistant Optional versions IS-version Ex ia = intrinsically safe for gases and dusts SIL according to IEC 6508 / IEC 65 special materials as Hastelloy and Tantal cooling element for media temperatures up to 00 C The pressure transmitter DMP P was designed for use in the food and pharmaceutical industry. The compact design with hygienic process connections makes it possible to achieve an outstanding performance in terms of accuracy, temperature behavior and long term stability. The modular construction concept allows a combination of various process connections with different filling fluids and a cooling element. Several electrical connections complete the profile of DMP P. This transmitter fulfills nearly all requirements in hygienic industrial processes. Preferred areas of use are Food Industry Pharmacy Material and test certificates material mill test report according to DIN EN 00-.. specific test report according to DIN EN 00-.. BD SENSORS GmbH BD-Sensors-Straße Tel +9 (0) 9 5 / 98-0 www.bdsensors.com D - 9599 Thierstein Fax +9 (0) 9 5 / 98 - info@bdsensors.de
DMP P Input pressure range gauge / abs. [bar] - 0 0.0 0.6 0.5 0.0 0.60.6 Overpressure [bar] 5 0.5 5 5 0 Burst pressure [bar] 7.5.5.5.5 7.5 7.5 5 gauge / abs. [bar].5 6 0 6 5 0 Overpressure [bar] 0 0 0 0 80 80 05 Burst pressure [bar] 5 5 50 50 0 0 0 Vacuum resistance P N bar: unlimited vacuum resistance P N < bar: on request consider the pressure resistance of fitting and clamps Output signal / Supply Standard -wire:... 0 ma / V S = 8... V DC Option IS-protection -wire:... 0 ma / V S = 0... 8 V DC Options -wire -wire: 0... 0 ma / V S =... 0 V DC 0... 0 V / V S =... 0 V DC Performance Accuracy standard: nominal pressure < 0. bar : ± 0.5 % FSO nominal pressure 0. bar: ± 0.5 % FSO option: nominal pressure 0. bar: ± 0.5 % FSO Permissible load current -wire: R max = [(V S V S min) / 0.0 A] Ω current -wire: R max = 500 Ω voltage -wire: R min = 0 kω Influence effects supply: 0.05 % FSO / 0 V load: 0.05 % FSO / kω Long term stability ± 0. % FSO / year at reference conditions Response time -wire: < 0 msec -wire: msec accuracy according to IEC 60770 limit point adjustment (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) / Permissible temperatures P N [bar] - 0 < 0.0 0.0 Tolerance band [% FSO] ± 0.75 ±,5 ± 0.75 in compensated range [ C] -0... 85 0... 50-0... 85 Permissible temperatures medium: -0... 5 C for filling fluid silicon oil -0... 5 C for filling fluid food compatible oil electronics / environment: -0... 85 C storage: -0... 00 C Permissible temperature medium filling fluid silicon oil overpressure: -0 00 C vacuum: -0... 50 C 5 for cooling element 00 C filling fluid food compatible oil overpressure: -0... 50 C vacuum: -0... 50 C 5 an optional cooling element can influence thermal effects for offset and span depending on installation position and filling conditions. max. temperature of the medium for nominal pressure gauge > 0 bar: 50 C for 60 minutes with a max. environmental temperature of 50 C 5 also for P abs bar Electrical protection Short-circuit protection Reverse polarity protection Electromagnetic compatibility Mechanical stability Vibration according to DIN EN 60068--6 Shock according to DIN EN 60068--7 Filling fluids Standard Options permanent no damage, but also no function emission and immunity according to EN 66 G /": 0 g RMS (5... 000 Hz) G /": 500 g / msec others except G /": 0 g RMS (5 000 Hz) others except G / : 00 g / msec silicon oil food compatible oil with FDA approval (Mobil DTE FM ; Category Code: H; NSF Registration No.: 066) Materials Pressure port stainless steel.0 (6 L) Housing stainless steel.0 (6 L) Option compact field housing stainless steel.05 (0), cable gland brass, nickel plated Seals (media wetted) standard: FKM (recommended for medium temperatures 00 C) option: FFKM (recommended for medium temperatures > 00 C) clamp and dairy pipe: without stainless steel.5 (6 L) / Tantalum and Hastelloy C-76 (.89) on request Media wetted parts pressure port, seals, diaphragm pressure and level
DMP P Explosion protection (only for 0 ma / -wire) Approvals IBExU 0 ATEX 068 X / IECEx IBE.007X DX 9-DMP P zone 0: II G Ex ia IIC T Ga zone 0: II D Ex ia IIIC T 85 C Da Safety technical maximum values U i = 8 V, I i = 9 ma, P i = 660 mw, C i 0 nf, L i 0 µh, the supply connections have an inner capacity of max. 7 nf to the housing Max. temperatures for in zone 0: -0... 60 C with p atm 0.8 bar up to. bar environment in zone or higher: -0... 70 C Connecting cables cable capacitance: signal line/shield also signal line/signal line: 60 pf/m (by factory) cable inductance: signal line/shield also signal line/signal line: µh/m Miscellaneous Option SIL according to IEC 6508 / IEC 65 Current consumption signal output current: max. 5 ma signal output voltage: max. 7 ma Weight min. 00 g (depending on process connection) Installation position any (standard calibration in a vertical position with the pressure port connection down; differing installation position for P N bar have to be specified in the order) Operational life CE-conformity ATEX Directive Wiring diagrams -Leiter-System (Strom) p Versorgung + > 00 x 0 6 pressure cycles EMC Directive: 00/08/EC 9//EG -wire-system (current / voltage) supply + p V S UB supply I Versorgung I/U signal + A/V Pin configuration Electrical connection ISO 00 Supply + Supply Signal (only -wire) Electrical connections (dimensions in mm) Binder 7 (5-pin) Mx / metal (-pin) Shield ground pin 5 field housing IN + IN - OUT+ cable colours (DIN 700) wh (white) bn (brown) gn (green) gn/ye (green / yellow) standard option ISO 00 Binder Series 7 Mx -pin cable outlet with PVC cable (IP 65) (IP 67) (IP 67) (IP 67) 6 compact field housing cable outlet, cable with ventilation tube (IP 67) (IP 68) 7 universal field housing stainless steel.0 (6 L) with cable gland M0x.5 (ordering code 880) and other versions on request 6 standard: m PVC cable without ventilation tube (permissible temperature: -5 70 C) 7 different cable types and lengths available, permissible temperature depends on kind of cable www.bdsensors.com
DMP P Mechanical connection (dimension in mm) Standard G/" flush DIN 85 8 Option G /" flush DIN 85 G" flush DIN 85 G/" flush G" flush with ISO 00 with ISO 00 with radial o-ring 8 with radial o-ring G" cone dairy pipe (DIN 85) clamp (ISO 85) cooling element 00 C with ISO 00 with ISO 00 with ISO 00 SIL- and SIL-Ex version: total length increases by 6.5 mm! metric threads and other versions on request 8 possible only for P N bar dimension in mm size DN 5 DN 0 DN 50 A 5 B 56 68.5 PN 0 0 5 dimension in mm size DN 5 DN 8 DN 5 A 5 B 50.5 50.5 6 PN 6 6 6 This data This datasheet contains contains product product specification, specification, properties properties are not are guaranteed. not guaranteed. Subject Subject to change to change without without notice. notice. DMPP_E_080 pressure Tel +9 and (0) level 9 5 / 98-0 www.bdsensors.com Fax +9 (0) 9 5 / 98 - info@bdsensors.de
Ordering code DMP P DMP P - - - - - - - - - Pressure gauge absolute 5 0 0 5 0 Input [bar] 0.0 0 0 0 0.6 6 0 0 0.5 5 0 0 0.0 0 0 0 0.60 6 0 0 0.0 0 0.6 6 0.5 5 0.0 0 0 6.0 6 0 0 0 0 0 6 6 0 5 5 0 0 0 0-0 X 0 9 9 9 Output 0 ma / -wire 0 0 ma / -wire 0 0 V / -wire Intrinsic safety 0 ma / -wire SIL 0 ma / -wire SIL with Intrinsic safety 0 ma / -wire E S ES Accuracy standard for P N 0, bar 0.5 % standard for P N < 0, bar 0.5 % 5 option for P N 0, bar 0.5 % Electrical connection Male and female plug ISO 00 Male plug Binder series 7 (5-pin) Cable outlet with PVC-cable Cable outlet Male plug Mx (-pin) / metal Compact field housing stainless steel stainless steel.05 0 0 0 0 T A 0 T R 0 M 0 8 5 0 9 9 Mechanical connection G/" with flush welded diaphragm (DIN 85) Z 0 0 G/" with flush welded diaphragm (DIN 85) Z 0 G" with flush welded diaphragm (DIN 85) Z G" DIN 85 with rad. o-ring and flush diaphragm Z 5 7 G/" DIN 85 with rad. o-ring and flush diaphragm Z 6 G " cone Clamp DN 5 (ISO 85) Clamp DN 8 (ISO 85) Clamp DN 5 (ISO 85) Dairy pipe DN 5 (DIN 85) Dairy pipe DN 0 (DIN 85) Dairy pipe DN 50 (DIN 85) K C 6 C 6 C 6 M 7 M 7 5 M 7 6 9 9 Stainless steel.5 (6L) Tantal Hastelloy C-76 (.89) T H Seals for clamp or dairy pipe: without 0 for inch thread - standard: FKM for inch thread - option: FFKM 7 Filling Fluids Silicon oil food compatible oil Special version standard with cooling element up to 00 C 0 0 0 0 0 9 9 standard: m PVC cable without ventilation tube (permissible temperature: -5 70 C), cable with ventilation tube (code TR0 = PVC cable), different cable types and lengths available, price without cable The cup nut has to be mounted by production of pressure transmitter with electrical connection field housing and mechanical connection dairy pipe. The cup nut has to be ordered as separate position. possible only for P N bar 07.0.0 This price list contains product specification; properties are not guaranteed. Detailed information about options are defined in the datasheet. Subject to change without notice.