Neutral Oils : 60R, 1RVL, 0R, 150R, 220R, 600R (80) Neutral Oils are all-hydroprocessed, / II+ paraffinic base oils that can be used in blending in a variety of lubricant and process oils. Application When combined with properly selected additives, Neutral Oils are ideal for blending a wide variety of finished products, including: Passenger car motor oils Heavy duty motor oils Industrial engine oils Tractor hydraulic fluids Transmission fluids Gear oils Greases Hydraulic oils Ammonia refrigeration oils Paper machine oils Turbine oils Process oils Lubricant additives Heat transfer fluids Customer Benefits Neutral Oils deliver value through: High viscosity index Good volatility Exceptional oxidation stability Compatibility with a wide array of additives for formulating flexibility Page 1 of 5
Features Neutral Oils are all-hydroprocessed, highly refined API /II+ paraffinic base stocks. Their extremely low sulfur, nitrogen, and aromatic content give them excellent thermal and oxidation stability. These base oils provide excellent cold flow performance because the ISODEWAXING catalyst and technology convert almost all of the wax in the feed into very stable, branched isoparaffins. Neutral Oils offer the following characteristics relative to typical Group I (solvent refined) base stocks: Lower volatility and cold cranking simulator (CCS) viscosity to meet modern engine oil specifications Better oxidation and thermal stability Lower aromatics, sulfur and nitrogen Improved response to pour point depressants Improved soot dispersancy in heavy duty motor oil formulations Neutral Oils 0R, 150R, 220R, and 600R are API base stocks with a typical viscosity index of 99-3. Neutral Oil 1RLV is a 5 cst "plus" base stock with a typical viscosity index of 115-117. It was designed to meet the strict volatility requirements of modern engine oils while maintaining API status to simplify qualification programs and to provide interchangeability of base stocks with other approved stocks. 1RLV enables blenders to minimize the amount of more expensive I oils needed for the most stringent W-XX and 5W-XX motor oil requirements. Neutral Oil 60R is a light viscosity oil that is typically used in light industrial oil applications, electrical insulating oils, as well as other specialty lubricants and process oils. Neutral Oils are non-toxic and meet U.S. Food and Drug Administration (FDA) requirement 21 CFR 178.3620(c) for components of nonfood articles. Page 2 of 5
Typical Test Data Product Number MSDS Number 60R 1RLV 0R 240664 255623 240667 30963 25003 (API 1509 E.1.3) + API Gravity 32.1 35.4 34.4 Specific Gravity at 60/60 F 0.865 0.8479 0.8529 Density, lb/gal 7.217 7.06 7.3.5 2.6 21.1 4.38 20.3 4.1 63 113 7 70 118 2 2500 1350 2200 1400-45 16 26 API Base Stock Category Viscosity, Kinematic cst at 40 C cst at 0 C ASTM D445 Viscosity, Saybolt SUS at 0 F ASTM D2161 Viscosity Index ASTM D2270 Cold-Cranking Simulator cp at -30 C cp at -25 C cp at -20 C cp at - C ASTM D5293 Pour Point, C Evaporation Loss, NOACK, wt % Flash Point, COC, C ASTM D97 CEC-L-40-A-93 ASTM D92 170 216 206 ASTM D1500 Sulfur, ppm 0 <6 Water, ppm ASTM D1744 80 Saturates, HPLC, wt % 99 Aromatics, HPLC, wt % 1 Color Minor variations in product typical test data are to be expected in normal manufacturing. Page 3 of 5
150R 220R 600R Product Number 581595 246748 246747 MSDS Number 11858 (API 1509 E.1.3) API Gravity 33.4 31.9 31.2 Specific Gravity at 60/60 F 0.8581 0.8660 0.8735 Density, lb/gal 7.145 7.216 7.279 29.7 5.2 43.7 6.6 8 12.2 153 214 590 5 2 3 2660 1550 3400 4800-13 -12 API Base Stock Category Viscosity, Kinematic cst at 40 C cst at 0 C ASTM D445 Viscosity, Saybolt SUS at 0 F ASTM D2161 Viscosity Index ASTM D2270 Cold-Cranking Simulator cp at -30 C cp at -25 C cp at -20 C cp at - C ASTM D5293 Pour Point, C Evaporation Loss, NOACK, wt % ASTM D97 CEC-L-40-A-93 14 2 ASTM D92 227 230 270 ASTM D1500 Sulfur, ppm Water, ppm Flash Point, COC, C Color ASTM D1744 Saturates, HPLC, wt % Aromatics, HPLC, wt % Minor variations in product typical test data are to be expected in normal manufacturing. Page 4 of 5
HANDLING AND SAFETY INFORMATION - Refer to Additives Technologies and Chemicals, Inc. SFS (Safety Data Sheets) for proper handling and safety information. Use the same care and handling as for any petroleum product. Nothing herein shall be deemed to constitute a warranty, express or implied, that said information or data are correct or that the products described are merchantable or fit for a particular purpose, or that said information, data or products can be used without infringing patents of third parties. The information in this bulletin is, to our best knowledge, sure and accurate, but all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control. Additives Technologies and Chemicals, Inc. and its affiliates disclaim any liability incurred in connection with the use of these data or suggestions. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use. Always confirm that the product selected whether combined with other base oils/additives or used alone will meet the required usage specifications or original equipment manufacturers recommendation for the equipment operating conditions and customer's maintenance practices. Page 5 of 5