Q Qualified roduct TO
ext3 eavy uty ylindrical onnectors I-T-22992, ext3 lass eavy uty onnectors are ruggedly constructed and tested to stand up to the rigors of unforgiving environments. This class represents the largest size cylindricals, and offer the performance demanded of both industrial and military applications. able connecting receptacle without coupling ring The design features of this connector series provide: TT ITY current ranges 40 to 200 amps, conductor sizes 6 to 4/0 Wall mount receptacle (power source) TY complete protection of personnel and equipment if connectors are inadvertently disconnected under load OOOO TI design incorporates specific voltage, current, frequency, phase and grounding requirements TIZTIO I-T-22992 lass insert arrangements specify connector/ cable combinations for maximum reliability traight plug VI OTT contacts are normally crimped to the cable Wall mount plug with coupling ring (equipment end) 2 ext3 design is covered by one or more of the following U.. atent umbers: 3,023,396; 3,221,292. 954-888-1024
ext3 eavy uty ylindrical onnectors I-T-22992/OITY igh urrent apacity ugged onstruction afety erviceability ext3 meets the demands for heavy duty connectors by providing three cylindrical connector series, each with unique design characteristics for reliable operation in specific industrial environments. for the heaviest electrical loads (ages 8 24) urrent range from 40 to 200 amperes irect current or single/three phase, 60/400 ertz alternating current utomatic grounding for safety I-T-22992 qualification QW for most power and control circuits (ages 26 66) ilitary (I-T-22992) qualified connectors and industrial equivalents available Increased shell size for greater durability than similar standard connectors QW a more compact heavy duty design for industrial power and control applications (age 66) These three series share the following common characteristics which are critical to reliable heavy duty connectors: esistance to the operating environment. efer to environmental data, below. ouble stub coupling threads for faster connections; no cross threading, easy cleaning. eft hand accessory threads to minimize cable twisting, wire breakage, accidental connector disassembly. askets or O-rings at appropriate surfaces for perfect weathertight connections. ext3 heavy duty connectors have been exposed to the following environmental conditions, without compromise of mechanical integrity or degradation of electrical performance. OITIO OIUTIO ITIO Thermal hock Unmated ive complete one hour temperature cycles of 55 to +125 I-T-1344, method 1003, test condition oisture esistance (able mounted connectors) ated Ten complete 24 hour cycles of +25 to +65 temperature at 90% to 98% humidity I-T-202, method 106 urability ated 500 complete mating/unmating cycles I--22992 alt pray (orrosion) Unmated 48 hour exposure to atomized 5% saline solution at +35 I-T-1344, method 1001 Vibration ated 10 to 55 z,.06 inch total excursion in 1 minute cycles for 6 hours, 55 to 2000 z, 10 peak amplitude sweep I-T-1344, method 2005 igh Impact ated ine hammer blows from 1, 3 and 5 feet, three each in three axes on mounting panel I-T-202, method 207 eat ise (lass only) ated aximum rated current for four hours at +25 in still air I-T-22992 luid Immersion Unmated 20 hours immersion in hydraulic fluid and lubricating oil I-T-22992 954-888-1024 3
ITOUTIO This catalog presents ext3 eavy uty ower onnectors covered by I-T-22992. or more information, please contact: ext3 15751 W 41st treet, uite 300 avie, lorida 33331 Telephone: 954.888.1024 ax: 954.888.1026 This catalog and other product literature from ext3 can be viewed, saved, and downloaded from our website: www.ext3.com ue to space limitations, metric equivalents of dimensional data in this catalog have not been included. ll dimensions given may be converted to the metric system by the standard formula; imension (inches) x 25.40 = dimension (millimeters).
Table of OTT XT3 VY UTY YII OTO: I-T-22992/OITY VY UTY YII OTO: I-T-22992, eneral Information, esign eatures....6 ow to Order...7 ontact rrangements.... 8,9 lternate Insert otations... 10 90555 Wall ount eceptacle (power source)... 11 90556 traight lug.... 12 90557 able onnecting eceptacle without coupling ring... 13 90558 Wall ount lug with coupling ring (equipment end)... 14 ccessories ontacts... 15 ccessories ontact ushing/emoval Tool... 16 ccessories able train elief/able ealing land... 17 ccessories rotective overs... 18 Installation Instructions... 19-22 VY UTY YII OTO: I--22992, QW eneral Information, esign eatures.... 24 ow to Order.... 25 I-T-22992, QW Insert rrangement harts... 26,30 QW pecial Insert rrangement hart... 28 lternate Insert otations... 29 I--22992, QW ontact rrangements... 30-41 17343 Wall ount eceptacle... 42 17345 able onnecting lug.... 43 17346 ox ount eceptacle... 44 17347 am ut eceptacle (Wall ount)... 45 ext3-1944xx Thru-ulkhead eceptacle... 46 17344 traight lug.... 47 17348 am ut eceptacle (ox ount)... 48 ccessories 85049/X able ealing dapters (lug)... 49-52 ccessories 85049/X able ealing dapters (eceptacle)... 53-56 ccessories able lamp, dapter... 57,58 ccessories rotective overs... 59,60 older ontacts... 61 olderless rimp ontacts... 62 pplication Tools (rimp Type).... 63 VY UTY YII OTO: OITY, QW I eneral Information, esign eatures, (eferences ext3 atalog 12-053)... 64 VY UTY YII OTO: 5015 I... 65 3400 ow to Order... 67 3100 ow to Order... 73 954-888-1024 5
ext3 eavy uty ylindrical onnectors I-T-22992, lass connectors are limited to the specific. configurations prescribed by I-T-22992. This spec is for both military and industrial applications. rigid configuration is required to ensure proper interconnection of electrical circuits. This configuration places a premium on safety and reliability. Variable factors include: onnector shell style and contact type wall mount and cable connecting receptacles are supplied with socket contacts only and always lead from the power source. lugs (with coupling rings) have pin contacts only and always lead to the equipment end. hell size the direct relationship of shell size to current carrying capability reduces the possibility of inadequate wiring for heavy electrical loads. IZ UT TI () OTT IZ 28 40 6 32 60 4 44 100 1/0 52 200 4/0 Other outstanding design features: rc quenching design recessed socket contacts within the insert create an arc suppressing chamber which protects the user when connectors are separated under load. rogrammed coupling sequence grounding and neutral contacts engage before power contacts. Waterproof design a unique combination of grommets and seals provides waterproofing in any condition - mated or unmated, capped or uncapped. ugged construction machined from high strength aluminum. traight-line attachment of accessories eliminates possibility of cable twisting or misalignment. ccessories supplied with all lass connectors as indicated on the individual connector descriptions. eplacement accessories may be ordered separately. ee pages 17 through 20. eyway position four positions of the main keyway are used to discriminate between the following power sources: two wire. two wire single phase.. three wire single phase.. four wire three phase.. Insert rotation when carrying alternating current (.), different angular rotations of the insert within the connector shell are used to distinguish between 60 ertz and 400 ertz circuits. I--22992 includes shell size 48, rated at 150 amperes. onsult your local ext3 sales representative or ext3, avie, for availability. 6 954-888-1024
I-T-22992, how to order onnectors are supplied with removable contacts unassembled and applicable accessories as listed in the individual connector style descriptions, pages 13 through 16. dditional/replacement contacts or accessories may be ordered by their designations. onnectors are ordered by designation. To illustrate the ordering procedure, part number 90555 32412Y is shown as follows: T U 90555 32 4 12 Y 1 2 3 4 5 6 7 1. umber 90555 designates wall mount receptacle (power source) 90556 designates straight plug 90557 designates cable connecting receptacle without coupling ring 90558 designates wall mount plug with coupling ring (equipment end) 2. hell inish (conductive) for or (nonconductive) for circuits. hell ize urrent ating mps rounding ssemblies: inish T Y/YWY OITIO 60z & 400z 1 hase 3 hase 2 Wire 3 Wire 3 Wire 4 Wire 120 V 240 V 120/240 V 450/480 V 120/208 V 240/416 V 277/480 V 28 40 4(120 ) 5 (135 ) 4 (120 ) 4 (120 ) 5 (135 ) 6 (150 ) 32 60 4 (120 ) 5 (135 ) 4 (120 ) 4 (120 ) 5 (135 ) 6 (150 ) 44 100 4 (120 ) 4 (120 ) 1 (60 ) 4 (120 ) 5 (135 ) 6 (150 ) 52 200 4 (120 ) 4 (120 ) 5 (135 ) 6 (150 ) hell ize on-rounding ssemblies: inish urrent ating mps T Y/ YWY OITIO 60z & 400z 2 Wire 28 V 28 40 (105 ) 32 60 (105 ) 44 100 (105 ) 52 200 (105 ) 3. hell ize related directly to current carrying capability. ize 28 40 amperes ize 32 60 amperes ize 44 100 amperes ize 52 200 amperes 4. aster ey/eyway osition designates normal position. ositions 1, 4, 5 and 6 of the master key/keyway prevent cross-mating of incompatible voltages. efer to the adjacent illustration. T YWY T Y/YWY OITIO 4 6 5 ormal 1 5. Insert rrangement determined by connector size (current carrying capability) and cable configuration to be accommodated. efer to pages 10 & 11. 6. ontact Type for pin, for socket. 90555 and 90557 are supplied with socket contacts only. 90556 and 90558 are supplied with pin contacts only. TYI OT T 15 front face of receptacle shown ote that insert arrangement does not rotate with master key/keyway 7. lternate Insert otation used to prevent cross-mating of incompatible frequencies. bsence of a letter in this space indicates normal (0 ) position of the insert. 954-888-1024 7
I-T-22992, contact arrangements hell ize 28, 40 amp rating 28-12, 28-13 Three phase, 4 wire, grounding able ontacts 28-12 I, type, round, four #8 conductors 28-13 O-04, (4/6-4/12) 1090 per I--3432 osition ize in 39029/48 ocket 39029/49,, 6-317 -329, 6-318 -329 hell ize 32, 60 amp rating 1 2 32-04, 32-05 ingle phase, 2 wire, grounding able 32-04 I, type, round, two #6 conductors 32-05 O-02, (2/4-2/8) 1100 per I--3432 ontacts osition ize in 39029/48 ocket 39029/49 4-320 -331 4-321 -331 1, 2 6-318 -329 hell ize 32, 60 amp rating 32-12, 32-13 Three phase, 4 wire, grounding able ontacts 32-12 I, type, round, four #6 conductors 32-13 O-04, (4/4-4/12) 1290 per I--3432 osition ize in 39029/48 ocket 39029/49,, 4-320 -331 4-321 -331 6-318 -329 hell ize 44, 100 amp rating able 44-02 I, type W, round, two #2 conductors ontacts 28-13 O-02, (2/1) 1385 per I--3432 osition ize in 39029/48 ocket 39029/49 1/0-1 -323-333 1/0-1 -324-333 44-02, 44-03 28 Volts, 2 wire OTT 6 4 1/0 4/0 8 954-888-1024
I-T-22992, contact arrangements hell ize 44, 100 amp rating able 44-12 I, type, round, four #2 conductors 44-13 O-04, (4/1-4/8) 1620 per I--3432 4 1 ontacts osition ize in 39029/48 ocket 39029/49,, 1/0-1 -323-333 3 2 1/0-1 -324-333 1, 2, 3, 4 6-319 -330 44-12, 44-13 Three phase, 4 wire, grounding hell ize 44, 100 amp rating or avy round upport quipment use only. 44-50, 44-51, 44-52, 44-56 Three phase, 3 wire, grounding able 44-50 vailable in 90555 & 90558 only, 4 each # 1 conductors 44-51 44-52 44-56 ontacts osition vailable in 90556 & 90557 only I, type W, round, four # 1 conductors vailable in 90556 only I, type W, round, four # 2 conductors vailable in 90556 only I, type W, round, four # 6 conductors ize in 39029/48 ocket 39029/49,, 1/0-1 -323-333 1/0-1 -324-333 hell ize 52, 200 amp rating able 52-12 I, type, round, four #4/0 conductors 52-13 O-04, (4/0000-4/4) 2380 per I--3432 ontacts 4 1 osition ize in 39029/48 ocket 39029/49,, 4/0-327 -335 4/0-328 -335 3 2 1, 2, 3, 4 4-322 -332 I Insulated ower able ngineers ssociation 52-12, 52-13 Three phase, 4 wire, grounding 954-888-1024 OTT 6 4 1/0 4/0 9
I-T-22992, alternate insert rotations To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. s shown in the diagram below, the front face of the pin insert is rotated within the shell in a counter-clockwise direction from the normal shell key. The socket insert would be rotated clockwise the same number of degrees in respect to the normal shell key. osition W osition X osition Y osition Z Views looking into front face of pin insert or rear of socket insert. Insert rrangements or 60 z ormal YI OITIO (degrees from normal position) 400 z W X Y Z 28-12 0 180 28-13 0 180 32-04 0 90 32-05 0 90 32-12 0 180 32-13 0 180 44-12 0 60 44-13 0 60 44-50 0 44-51 0 44-52 0 44-56 0 52-12 0 300 52-13 0 300 10 954-888-1024
I-T-22992, 90555 wall mount receptacle (power source).531 I U T * +.011.010.312.031 ±.005 T 4 O T.750 +.031.000 OT hell ize Thread lass 2.1428-.2857 ouble tub * ±.031 ia. +.006.010 ±.005 28 2.000 1.376 1.938 1.514 2.188 2.000 1.844 2.375.177 32 2.250 1.376 2.188 1.514 2.188 2.250 2.062 2.625.209 44 3.000 1.438 3.062 1.733 2.532 3.125 2.812 3.375.281 52 3.500 1.438 3.562 1.733 2.532 3.625 3.156 3.875.281 ll dimensions for reference only. To complete art number see how to order, pg. 9. rotective cover 90563 is supplied as part of this connector assembly. efer to page 20 for dimensions. * dimension applies only when rear nut is fully tightened. +.016.000 ia. +.011.020 () +.021.020 T ia. ±.005 954-888-1024 11
I-T-22992, 90556 straight plug.750 +.031.000 I OIT T "O" I Q hell ize and rrangement Thread lass 2.1428-.2857 ouble tub ia. ax able ange ±.005 ax ree ength pprox. ree ength 28-12 1.047.922 7.188 2.000 2.439 1.557 8.188 28-13 1.130 1.005 7.188 32-04.969.844 32-05, -12 2.250 2.689 1.130 1.005 1.557 8.188 7.188 32-13 1.342 1.217 8.688 44-02 1.312 1.187 44-03 1.438 1.313 9.688 3.000 3.667 1.776 10.172 44-12 1.516 1.391 10.688 7.188 10.688 44-13 1.672 1.547 12.688 44-51 1.734 1.609 11.688 44-52 3.000 3.667 1.525 1.435 1.776 10.172 11.188 44-56 1.135 1.065 7.188 52-12 2.328 2.183 17.188 3.500 4.167 1.776 11.109 52-13 2.453 2.308 18.188 ia. +.011.020 Q ia. ax 2.000 2.312 2.000 2.562 2.500 3.531 2.500 3.531 3.250 4.016 ll dimensions for reference only. To complete art number see how to order, pg. 9. rotective cover 90564 is supplied as part of this connector assembly. efer to page 20 for dimensions. ontact brushings 3348 are supplied as part of connector as required. efer to page 18 for dimensions. 12 954-888-1024
I-T-22992, 90557 cable connecting receptacle without coupling ring.531 I U T "O" I.750 +.031.000 hell ize and rrangement Thread lass 2.1428-.2857 ouble tub ±.005 ia. ax able ange ax ree ength pprox. ree ength 28-12 1.047.922 7.188 2.000 1.514 2.439 8.156 28-13 1.130 1.005 7.188 32-04.969.844 32-05, -12 2.250 1.514 2.689 1.130 1.005 8.156 7.188 32-13 1.342 1.217 8.688 44-02 1.312 1.187 44-03 1.438 1.313 9.688 44-12 3.000 1.733 3.667 1.516 1.391 10.125 10.688 44-13 1.672 1.547 12.688 44-51 1.734 1.609 11.688 52-12 2.328 2.183 17.188 3.500 1.733 4.167 11.062 52-13 2.453 2.308 18.188 7.188 10.688 ia. +.011.020 2.000 2.000 2.500 3.250 ll dimensions for reference only. To complete art number see how to order, pg. 9. rotective cover 90563 is supplied as part of this connector assembly. efer to page 20 for dimensions. ontact bushings 3348 are supplied as part of connector as required. efer to page 18 for dimensions. 954-888-1024 13
I-T-22992, 90558 wall mount plug with coupling ring (equipment end) T.031 ±.005.312+.011.010 I OIT T OT Q.750 +.031.000 ITI T 4 O hell ize Thread lass 2.1428.2857 ouble tub ±.031 ia. +.006.010 * +.016.000 28 2.000.959 1.938 2.639 1.557 2.000 2.312 1.844 2.375.177 32 2.250.959 2.188 2.639 1.557 2.250 2.562 2.062 2.625.209 44 3.000 1.021 3.062 2.998 1.776 3.125 3.531 2.812 3.375.281 52 3.500 1.021 3.562 2.998 1.776 3.625 4.016 3.156 3.875.281 ±.005 ll dimensions for reference only. To complete part number see how to order, pg. 9. rotective cover 90564 is supplied as part of this connector assembly. efer to page 20 for dimensions. * dimension applies only when rear nut is fully tightened. ia. +.011.020 Q ia. ax () +.021.020 T ia. ±.005 14 954-888-1024
I-T-22992, OI contacts 39029/48 pin contact.750 +.031.000 39029/49 socket contact.750 +.031.000 ocket art umber* in art umber ontact ize Wire Well ize ef. ±.005 39029/49-335 39029/48-327 4/0 4/0 3.207 2.097.641 +.004.003 39029/48-328 4/0 4/0 3.325 2.215.641 +.004.003 39029/49-333 39029/48-323 1/0 1 3.207 2.097.406 +.004.003 39029/48-324 1/0 1 3.325 2.215.406 +.004.003 ia ia ±.001 ia ia.500.781 ±.003.750 +.004.003.500.781 ±.003.750 +.004.003.357.609 ±.003.506 +.004.003.357.609 ±.003.506 +.004.003 ±.005 ef 1.283 2.393 1.283 2.393 39029/49-331 39029/48-320 4 4 2.786 1.738.281 ±.002.225.417 ±.002.374 ±.002 1.158 2.206 39029/48-321 4 4 2.904 1.856.281 ±.002.225.417 ±.002.374 ±.002 39029/49-329 39029/48-317 6 6 2.786 1.738.234 ±.002.178.342 ±.002.312 ±.002 1/158 2.206 39029/48-318 6 6 2.904 1.856.234 ±.002.178.342 ±.002.312 ±.002 39029/49-332 39029/48-322 4 4 2.856 1.746.281 ±.002.225.417 ±.002.374 ±.002 1.752 2.862 39029/49-330 39029/48-319 6 6 2.856 1.746.234 ±.002.178.342 ±.002.312 ±.002 1.752 2.862 ll dimensions for reference only. *Order by part number listed for either socket or pin. 954-888-1024 15
I-T-22992, OI contact bushing / removal tool 3348 OTT UI.700 +.017.016 art umber* ll dimensions for reference only. *Order by part number listed. ontact Wire arrel ize (ef) Wire ize (ef) ia +.010.003 ia +.002.003 3348-1 2 1 2.359.396 3348-4 5 4 5.250.272 3348-4 6 4 6.225.272 3348-6 8 6 8.185.225 3348-6 9 6 9.155.225 3348-1 6 1 6.225.396 3348-4 8 4 8.185.272 3348-6 10 6 10.136.225 3348-4/0 2/0 4/0 2/0.500.629 90562 OTT OV TOO 2.500 ±.016 art umber* ontact Wire arrel ize (ef) ll dimensions for reference only. *Order by part number listed. ia +.000.002 90562 1 4/0.790 90562 2 2/0.696 90562 3 1/0.558 90562 4 2.462 90562 5 4.376 90562 6 6.354 16 954-888-1024
I-T-22992, OI cable strain relief / cable sealing gland 90561 TI I art umber* rrangement umber ia +.000.010 ia able ange ax in pprox. 90561-2 28-13, 32-12 1.797 1.145 1.003 8.000 90561-4 28-02, -04 1.797.844.688 7.500 90561-12 28-12 1.797 1.047.891 8.000 90561-13 32-13 1.797 1.342 1.185 9.500 90561-15 44-12 2.235 1.516 1.360 11.500 90561-16 44-13 2.235 1.688 1.531 13.500 90561-17 52-12 2.922 2.328 2.039 18.000 90561-18 52-13 2.922 2.500 2.211 19.000 90561-19 44-51 2.235 1.750 1.550 12.500 90561-20 44-52 2.235 1.578 1.375 12.000 90561-21 44-56 2.235 1.160 1.010 8.000 ll dimensions for reference only. *Order by part number listed. 23747 I art umber* rrangement umber ia +.000.020 ia +.020.000 ±.010 in able ia ef. 23747-2 28-13, 32-05, -12 1.805 1.130 1.034 1.005 23747-12 28-12 1.805 1.047 1.034.922 23747-13 32-13 1.805 1.342 1.034 1.217 23747-14 44-03 2.242 1.438 1.160 1.313 23747-15 44-12 2.242 1.516 1.160 1.391 23747-16 44-13 2.242 1.672 1.160 1.547 23747-18 52-12 2.927 2.328 1.284 2.183 23747-19 52-13 2.927 2.453 1.284 2.308 23747-20 44-51 2.242 1.734 1.160 1.609 This gland must be used with 90561 strain relief. 23747-21 44-52 2.242 1.562 1.160 1.437 23747-22 44-56 2.242 1.150 1.160 1.025 ll dimensions for reference only. *Order by part number listed. 954-888-1024 17
I-T-22992, OI protective covers 90563 OTTIV OV used with: 90555 wall mount receptacle 90557 cable connecting receptacle art umber* Use with hell ize Thread lass 2.1428.2857 ouble tub or 90555 ia ef or 90557 pprox..969 X 90563-1( ) 28 2.000.190.190 6.000 90563-3( ) 32 2.250.190 4.500 90563-4( ) 32 2.250.190 6.000 90563-7( ) 44 3.000.265.265 7.500 90563-11( ) 52 3.500.265.265 7.500 T ll dimensions for reference only. *To complete part number, add letter (onductive) for or (non-conductive) for connector assemblies. 90564 OTTIV OV used with: 90556 straight plug 90558 wall mount plug art umber* Use with hell ize Thread lass 2 (lated).1428.2857 ouble tub or 90556 ia ef or 90558 pprox. ax 90564-1( ) 28 2.000.190.190 7.500 2.266 90564-3( ) 32 2.250.190 6.000 2.266 90564-4( ) 32 2.250.190 7.500 2.266 90564-7( ) 44 3.000.265.265 8.500 2.484 90564-11( ) 52 3.500.265.265 8.500 2.484 IVT ll dimensions for reference only. *To complete part number, add letter (onductive) for or (non-conductive) for connector assemblies. 18 954-888-1024
I-T-22992, installation instructions eproduced below are condensed assembly instructions to familiarize the user with the installation procedure and tooling required. able reparation (90556 and 90557 connectors only) The following table shows the standard wire color coding, generator terminal markings, and connector contact identification used with lass connectors. tandardized enerator Wiring and onnections TO TI I + (O) () ground 1 2 3 0 (or nd) UT OTT ITIO OUTO IUIT WI OO 28Vdc 28Vdc ositive egative hase hase hase eutral afety grounding lack White lack ed lue (ommercial may be orange) White reen (ommercial may be bare) tep 1) etermine cable lay to facilitate alignment of contacts and insert holes without wire crossing. tep 2) trip cable jacket to dimension shown. void cutting or nicking individual conductor insulation. OTO IZ I OX. 28 3.000 32 3.000 44 4.250 52 5.000 OUT T OT ote: ome insert arrangements require that two or more ground wires be terminated into one contact. imension must therefore be increased to permit routing these wires around the larger conductors. tep 3) Install connector components in the order shown in the applicable assembly view illustrated on pages 22 & 23. tep 4) trip insulation of individual conductors to ¾ inch from end of conductor. 954-888-1024 19
I-T-22992, installation instructions 90555 OTO Wall ount eceptacle omponents: 1. hell 2. Insert ssembly, ocket 3. ontact, ocket 4. rommet ssembly, ocket 5. ut, etaining 6. rotective ap ssembly (ot hown) 7. lange asket (ot hown) 90556 OTO traight lug omponents: 1. hell and oupling ut ssembly 2. Insert ssembly, in 3. ontact, in 4. pacer ssembly, in 5. ack dapter 6. land Washer 7. land 8. able rip 9. land ut 10. ockwasher (3 each) 11. crew (3 each) 12. O-ing 13. rotective ap ssembly (ot hown) 20 954-888-1024
I-T-22992, installation instructions 90557 OTO able onnecting eceptacle omponents: 1. hell 2. Insert ssembly, ocket 3. ontact, ocket 4. pacer ssembly, ocket 5. ack dapter 6. land Washer 7. land 8. able rip 9. land ut 10. ockwasher (3 each) 11. crew (3 each) 12. O-ing 13. rotective ap ssembly (ot hown) 90558 OTO Wall ount lug omponents: 1. hell and oupling ut ssembly 2. Insert ssembly, in 3. ontact, in 4. rommet ssembly, in 5. ut, etaining 6. rotective ap ssembly (ot hown) 7. lange asket (ot hown) 954-888-1024 21
I-T-22992, installation instructions ITI OTT tep 1) trip conductors and insert them into the contact wirewell. In cases where a contact bushing is used, first insert the conductor into the bushing, then insert the bushing into the contact wirewell. If your installation requires inserting two or more ground wires, ensure that all of the wires are fully seated in the wirewell. tep 2) eferring to the table at the right and identifying the contacts to be installed, choose the appropriate crimping tool, locater and die combination. Then insert the contact into the tool with the conductor or bushing in place. oldering otes: uniform crimp is attained by fully crimping the die. When crimping tools are not available, you may solder contacts to conductors. We recommend rosin-alcohol solder flux, 60/40 solder (good grade) and a 500-watt soldering iron of probe-type resistance tool. re-tinning conductors is recommended. lease remove any solder from contact shoulder or retention area. I OTO tep 1) heck inserts for positioning in the connector shell. fter aligning the large tab on the insert with the large slot in the shell, press the insert into place until it settles into the bottom of the shell. tep 2) Use ow orning -4 lubricant (thin coating), on the periphery of the contact holes in the spacer or grommet assembly. ress contacts into the rear of the spacer/grommet assembly. This assembly should lock in to the contact retainer bushing. tep 3) lign the contacts and holes within assembly, making sure to align the small key insert with the correct spacer/grommet assembly. ext, slide the contacts into the insert holes until the assembly is seated against the insert. gain we recommend a thin layer of ow orning -4 lubricant along the edge of the contact holes for maximum sealing. tep 4) ccessories may now be joined to the connector. We recommend a thin application of ow orning -4 lubricant for the back adapter O-ring. The gland (outer surfaces only!) requires a thin layer of UniTemp rease. aution: o not allow grease to come in contact with inside gland surfaces or cable jacket. tep 5) You may now tighten the retaining or gland nut on the shell or adapter. While metal-to metal seating is preferred, the largest cable diameters may not allow this degree of seating. OVI OTT ontact art umber ize Type 39029/48-327 39029/49-335 39029/48-328 39029/48-323 39029/49-333 39029/48-324 39029/48-320 39029/49-331 39029/48-321 39029/48-322 39029/49-332 39029/48-317 39029/49-329 39029/48-318 39029/48-319 39029/49-330 tep 1) oosen all of the rear assemblies, then slide them back along the cable. tep 2) etach the spacer/grommet assembly (and contacts) from the connector insert. tep 3) elect the appropriately sized contact removal tool. ush the tool over the front of the contact, until it finds the bottom of the spacer/ grommet hole. This enables you to open the contact retaining bushing, which, in turn, allows the removal of the contact from the spacer/grommet assembly. pecial note: When jacketed cables are present, first release all contacts from the contact retention bushings, prior to removing them from the spacer/grommet assembly. 4/0 4/0 4/0 1/0 1/0 1/0 4 4 4 4 4 6 6 6 6 6 rimping Tool* ico odel 400 or 400-1 ico odel 400 or 400-1 ico odel 400 or 400-1 ico odel 400 or 400-1 ocator* ie* emoval Tool 4297-1 414-4/0-1 90562-1 4297-3 414-1/0 90562-3 4297-5 414-4 90562-5 4297-6 414-6 90562-6 22 954-888-1024
954-888-1024 VY UTY YII I-T-22992, QW 23
ext3 eavy uty ylindrical onnectors I-T-22992, QW ext3 QW eries eavy uty cylindrical connectors have been designed to reliably deliver power and control in environments unsuitable for less rugged products. These connector products include the following features: Incredible trength water and explosion proof, resistant to abrasion, corrosion, vibration and shock ast, ositive ating double stub threads per I-T-1373 for fast coupling, simple cleaning hoice over 300 industrial and approved insert patterns available, including coaxial and thermocouple These circumstances are typical of the severe conditions under which thousands of ext3 QW connectors are operating every day. esign features that make these cylindricals a necessity for difficult environments include: lumilite 225* hard anodic finish for abrasion and corrosion resistance or conductive cadmium plate esilient inserts for moisture sealing, positive proof against shock and vibration ealing gaskets at every joint for waterproof assembly able strain relief provided by clamp bar type accessories eft hand accessory threads to prevent damage from disconnect torque applied in the wrong direction losed entry socket contact design in solder or replaceable crimp contacts *egistered trademark of luminum ompany of merica 24 954-888-1024
I-T-22992, QW how to order -OV OTO To illustrate the ordering procedure, part number 173432027W is shown as follows: T U 17343 20 27 W 1 2 3 4 5 6 7 1. umber 17343 designates wall mount receptacle 17344 designates straight plug 17345 designates cable connecting plug 17346 designates box mount receptacle 17347 designates jam nut receptacle with rear accessory threads (wall mount) 17348 designates jam nut receptacle (box mount) 2. lass designates pressurized used where circuit integrity is protected by a pressure differential designates environmental 3. hell ize available in shell sizes 12 through 44. efer to pages 44 through 50 for dimensional data. 4. hell inish for conductive or for non-conductive 5. Insert rrangement current insert arrangements are shown in black in the QW insert arrangements section of this catalog. Only these arrangements are available in -approved connectors. 6. ontact Type for pin, for socket. 7. lternate Insert otation used to prevent cross-mating of connectors. bsence of a letter in this space indicates normal (0 ) position of the insert. efer to page 31 for alternate insert rotation illustrations. *egistered trademark of luminum ompany of merica 954-888-1024 25
I-T-22992, QW insert arrangements Insert rrangement pproved Industrial ervice ating ontact ize Total ontacts 0 4 8 12 16 12-5 1 1 12-48 3 3 12-49 2 2 14-3 1 1 14-53 Inst. 6 6 16-2 1 1 16-7 3 1 2 16-9 4 2 2 16-10 3 3 16-11 2 2 16-12 1 1 16-13 2 2 18-1 16-61 7 7,,, = ; al. = Inst. 10 10 18-3 2 2 18-4 4 4 18-5 3 2 1 18-6 1 1 18-7 1 1 18-8 8 1 7 18-9 Inst. 7 2 5 18-10 4 4 18-11 5 5 18-12 6 6 18-13 4 1 3 18-14 2 1 1 18-15 4 4 18-16 1 1 18-17 Inst. 7 2 5 18-19 10 10 18-20 5 5 18-22 3 3 18-24,,, = ; al. = Inst. 10 10 18-29 5 5 18-30 5 5 18-31 5 5 20-2 1 1 20-3 3 3 20-4 4 4 20-7 20-6 3 3,,, = ;,,, = 8 8 20-8 Inst. 6 2 4 Insert rrangement pproved Industrial ervice ating ontact ize Total ontacts 0 4 8 12 16 20-9 = ; al. = 8 1 7 20-11 Inst. 13 13 20-12 2 1 1 20-14 5 2 3 20-15 7 7 20-16 9 2 7 20-17 6 5 1 20-18 9 3 6 20-19 3 3 20-20 4 1 3 20-21 9 1 8 20-22 6 3 3 20-23 2 2 20-24 4 2 2 20-25 Inst. 13 13 20-27 14 14 20-29 17 2 17 20-30 Inst. 13 13 20-33 11 11 22-1 2 2 22-2 3 3 22-4 4 2 2 22-5 6 2 4 22-6 3 2 1 22-7 1 1 22-8 2 2 22-9 3 3 22-10 4 4 22-11 2 2 22-12 5 2 3 22-13 = ;,,, = 5 4 1 22-14 19 19 22-15 = ;,,,, = 6 5 1 22-16 9 3 6 22-17 = ; al. = 9 1 8 22-18,,,, = ;,, = 8 8 22-19 14 14 22-20 9 9 22-21 3 1 2 22-22 4 4 22-23 = ; al. = 8 8 22-24,, = ;,, = 6 2 4 26 954-888-1024
I-T-22992, QW insert arrangements Insert rrangement pproved Industrial ervice ating 954-888-1024 ontact ize Total ontacts 0 4 8 12 16 22-7 = ; al. = 9 1 8 22-28 7 7 22-33,,, = ;,, = 7 7 22-34 5 3 2 22-36 = ; al. = 8 8 24-2 7 7 24-6 24-3 7 2 5 24-5 16 16,, = ; al. = 8 8 24-7 16 2 14 24-9 2 2 24-10 7 7 24-11 9 3 6 24-12 5 2 3 24-16,,, = ;,, = 7 1 3 3 24-17 5 2 3 24-20 11 2 9 24-21 10 1 9 24-22 4 4 24-27 7 7 24-28 Inst. 24 24 28-1,, = ; al. = 9 3 6 28-2 14 2 12 28-3 3 3 28-4,, = ; al. = 9 2 7 28-5 5 2 1 2 28-8 28-6 3 3 28-7 2 2, = ; = ; al. = 12 2 10 28-9 12 6 6 28-10 = ; al. = 7 2 2 3 28-11 22 4 18 28-12 26 26 28-13 26 26 28-15 35 35 28-17 28-18 28-19 28-16 20 20 = ;,, = ; to = = ;,,,, = ;, = ; al. = Inst., = ;, = ; al. = 15 15 12 12 10 4 6 28-20 14 10 4 Insert rrangement pproved Industrial ervice ating ontact ize Total ontacts 0 4 8 12 16 28-21 37 37 28-22 6 3 3 32-1 = ; al. = 5 2 3 32-2 5 3 2 32-3 9 1 2 2 4 32-4,,, = ; al. = 32-5 2 2 14 2 12 32-6 23 2 3 2 16 32-7,,, = Inst.; al. = 35 7 28 32-8 30 6 24 32-9 14 2 12 32-10 32-12, = ; = ;, = ;, =,,,, = ; al. = 7 2 2 3 15 5 10 32-13 23 5 18 32-15 8 2 6 32-16 23 2 3 2 16 32-17 4 4 32-73 46 46 36-1 22 4 18 36-3 6 3 3 36-4 = ;, = 3 3 36-5 4 4 36-6 6 2 4 36-7 47 7 40 36-8 47 1 46 36-9 31 1 2 14 14 36-10 48 48 36-11 48 48 36-12 48 48 36-13,, Q = ; al. = 17 2 15 36-14 16 5 5 6 36-15 = ; al. = 35 35 36-16 47 7 40 36-17 47 7 40 36-18 31 1 2 14 14 36-20 34 2 2 30 36-52 52 52 40-1 30 6 24 40-9 47 1 22 24 40-56 85 85 40-52 104 104 27
QW special insert arrangements ontact ize ontact ize Insert rrangement ervice ating Total ontacts 0 4 8 12 16 16-59 4 4 20-51 3 3 20-57 7 7* 20-58 10 5 5 20-59 3 3* 20-66 6 5* 1 20-79 / 8 1 7 22-63 12 4 8t 22-65 / 8 8* 22-70 13 8 5 22-80 3 3* 24-51 5 5 24-52 i Volt. 1 1 24-53 5 5 24-58 13 3 3 7 24-59 14 7 7 24-60 7 7* 24-65 15 11 4 24-66 7 7 24-67 Inst. 19 19 24-71 7 7* 24-75 7 7* 24-79 5 5 24-80 Inst. 23 23 28 954-888-1024 oax** 0 4 8 12 24-84 19 1 18 28-51 12 12 28-59 17 7 10 28-66 16 2 14 28-72 oax 3 3 28-74 16 7* 9 28-75 16 7* 9 28-79 16 7 9 28-82 6 2 4 28-84 9 9 32-52 8 2 6 32-53 Inst./ 42 5 37 32-56 30 6* 24 32-57 oax 8 6 2 32-58 oax 4 4 32-60 23 15 8 32-62 oax 23 2 1 2 16 2 32-64 Inst. 54 54 32-68 16 12 4 32-75 oax 9 2 7 32-76 19 19 32-79 5 4 1 * rimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. rrangements identified with an asterisk (*) are exceptions. ee insert arrangement drawings on pages 39-47 for application wire size. Insert rrangement ervice ating Total ontacts 0 4 8 12 16 36-51 4 2 2 36-54 39 8 31 36-55 39 8* 31 36-59 53 3* 50 36-60 47 7* 40 36-64 oax 4 4 36-65 oax 4 4 36-71 53 3 50 36-73 oax 7 7 oax** 0 4 8 12 36-74 44 43 1 36-75 48 48* 36-76 47 47 36-77 7 7 36-78 14 12 2 36-79 20 20 36-80 20 20* 36-83 oax 7 7 36-85 / 35 35* 40-53 60 60 40-57 4 4 40-61 59 1 3 55 40-62 60 60 40-63 61 61* 40-64 oax 36 3 20 13 40-66 oax 4 4 40-67 11 1 10 40-68 21 21 40-70 61 61 40-72 11 1 10 40-73 61 61 40-74 6 1 4 1 40-75 5 4 1 40-80 11 10 1 40-81 62 62* 40-82 62 62 40-85 60 60* 40-86 4 4 40-87 7 7 44-53 36 18 18 48-51 56 10 42 4 48-52 61 56 5 48-53 37 37 48-54 56 10 42 4 48-55 78 6 2 2 68 48-57 56 4 10 42 48-60 56 10 42 ** oaxial cable data can be found on insert arrangement drawings, pages 39-47. or further information on coaxial contacts and cable see catalog 12-130. onsult ext3 for availability
I-T-22992, QW alternate insert rotations ome installations require more than one connector of the same size and arrangement. In these installations, cross-plugging problems can be avoided by using alternate insert rotations. They are detailed in the charts on this page. ample otation ositions The diagrams show how the front face of the pin insert is rotated: within the shell clockwise direction from the normal shell key; socket insert counter-clockwise by the same degrees per normal shell key. osition W osition X osition Y osition Z Views looking into front face of pin insert or rear of socket insert. Insert rrangement W X Y Z Insert rrangement W X Y Z Insert rrangement W X Y Z 16-7 80 110 250 280 16-9 35 110 250 325 16-10 90 180 270 16-11 35 110 250 325 16-13 35 110 250 325 16-61 80 280 18-1 70 145 215 290 18-3 35 110 250 325 18-4 35 110 250 325 18-5 80 110 250 280 18-8 70 290 18-9 80 110 250 280 18-10 120 240 18-11 170 265 18-12 80 280 18-13 80 110 250 280 18-14 80 110 250 280 18-15 120 240 18-19 120 240 18-20 90 180 270 18-22 70 145 215 290 18-29 90 180 270 20-3 70 145 215 290 20-4 45 110 250 20-5 35 110 250 325 20-6 70 145 215 290 20-7 80 110 250 280 20-8 80 110 250 280 20-9 80 110 250 280 20-12 80 110 250 280 20-14 80 110 250 280 20-15 80 280 20-16 80 110 250 280 20-17 90 180 270 20-18 35 110 250 325 20-19 90 180 270 20-20 80 110 250 280 20-21 35 110 250 325 20-22 80 110 250 280 20-23 35 110 250 325 20-24 35 110 250 325 20-27 35 110 250 325 20-29 80 280 22-1 35 110 250 325 22-2 70 145 215 290 22-3 80 110 250 280 22-4 35 110 250 325 22-5 35 110 250 325 22-6 80 110 250 280 22-8 35 110 250 325 22-9 70 145 215 290 22-10 35 110 250 325 22-11 35 110 250 325 22-12 80 110 250 280 22-13 35 110 250 325 22-14 80 110 250 280 22-15 80 110 250 280 22-16 80 110 250 280 22-17 80 110 250 280 22-18 80 110 250 280 22-19 80 110 250 280 22-20 35 110 250 325 22-21 80 110 250 280 22-22 110 250 22-23 35 250 22-24 80 110 250 280 22-25 80 110 250 280 22-27 80 250 280 22-28 80 280 22-33 80 110 250 280 22-34 80 110 250 280 22-36 90 270 24-2 80 280 24-3 80 110 250 280 24-4 80 110 250 280 24-5 80 110 250 280 24-6 80 110 250 280 24-7 80 110 250 280 24-9 35 110 250 325 24-10 80 280 24-11 35 110 250 325 24-12 80 110 250 280 24-16 80 110 250 280 24-17 80 110 250 280 24-20 80 110 250 280 24-21 80 110 250 280 24-22 45 110 250 24-27 80 280 24-28 80 110 250 280 28-1 80 110 250 280 28-2 35 110 250 325 28-3 70 145 215 290 28-4 80 110 250 280 28-5 35 110 250 325 28-6 70 145 215 290 28-7 35 110 250 325 28-8 80 110 250 280 28-9 80 110 250 280 28-10 80 110 250 280 28-11 80 110 250 280 28-12 90 180 270 18-15 80 110 250 280 28-16 80 110 250 280 28-17 80 110 250 280 28-18 70 145 215 290 28-19 80 110 250 280 28-20 80 110 250 280 28-21 80 110 250 280 28-22 70 145 215 290 32-1 80 110 250 280 32-2 70 145 215 290 32-3 80 110 250 280 32-4 80 110 250 280 32-5 35 110 250 325 32-6 80 110 250 280 32-7 80 125 235 280 32-8 80 125 235 280 32-9 80 110 250 280 32-10 80 110 250 280 32-12 80 110 250 280 32-13 80 110 250 280 32-15 35 110 250 280 32-17 45 110 250 32-73 36 36-1 80 110 250 280 36-3 70 145 215 290 36-4 70 145 215 290 36-5 120 240 36-6 35 110 250 325 36-7 80 110 250 280 36-8 80 110 250 280 36-9 80 125 235 280 36-10 80 125 235 280 36-13 80 110 250 280 36-14 90 180 270 36-15 60 125 245 305 36-52 72 144 216 288 40-1 65 130 235 300 40-9 65 125 225 310 40-56 72 144 216 288 44-52 72 135 225 288 954-888-1024 29
I-T-22992, QW contact arrangements ront ace of in Insert or ear of ocket Insert Illustrated Insert rrangement ervice ating umber of ontacts ontact ize 12-5 12-48 12-49 14-3 14-53 16-2 Inst. 1 3 2 1 6 1 12 16 16 8 16 12 Insert rrangement ervice ating umber of ontacts ontact ize 16-7 16-9 16-10 16-11 16-12 16-13 1 2 2 2 3 2 1 2* 8 16 1216 12 12 4 12 I Insert rrangement ervice ating umber of ontacts ontact ize 16-61 18-1 18-3 18-4 18-5 18-6,,, = ; al. = Inst. 7 10 2 4 2 1 1 16 16 12 16 12 16 4 Insert rrangement ervice ating umber of ontacts ontact ize 18-7 18-8 18-9 18-10 18-11 18-12 Inst. 1 1 7 2 5 4 5 6 8 12 16 12 16 12 12 16 * = Iron; = onstantan OTT 16 12 8 4 0 30 954-888-1024
I-T-22992, QW contact arrangements ront ace of in Insert or ear of ocket Insert Illustrated 100 100 otation of 18-9 Insert rrangement ervice ating umber of ontacts ontact ize 18-13 18-14 18-15 18-16 18-17 18-19 Inst. 1 3 1 1 4** 1 2 5 10 812 4 16 12 12 12 16 16 I 110 250 260 250 otation 110 otation 260 otation of 18-1 of 18-20 of 18-20 Insert rrangement ervice ating umber of ontacts ontact ize 18-20 18-22 18-24 18-29 18-30 18-31,,, =, al. = Inst. 5 3 10 5 5 5 16 16 16 16 16 16 Insert rrangement ervice ating umber of ontacts ontact ize 20-2 20-3 20-4 20-6 20-7 20-8,,, = ;,,, = Inst. 1 3 4 3 8 2 4 0 12 12 16 16 8 16 **, = Iron;, = onstantan 954-888-1024 OTT 16 12 8 4 0 31
32 954-888-1024 I-T-22992, QW contact arrangements 20-9 20-11 20-12 20-14 20-15 20-16 = ; al. = Inst. 1 7 13 1 1 2 3 7 2 7 12 16 16 4 16 8 12 12 12 16 I 20-17 20-18 20-19 20-20 20-21 20-22 5 1 3 6 3 1 3 1 8 3 3 12 16 12 16 8 4 12 12 16 8 16 I I 100 otation 250 otation of 20-11 of 20-11 20-23 20-24 20-25 20-27 20-29 20-30 Inst. Inst. 2 2 2 13 14 17 13 8 8 16 16 16 16 16 100 250 I T ront ace of in Insert or ear of ocket Insert Illustrated Insert rrangement ervice ating umber of ontacts ontact ize Insert rrangement ervice ating umber of ontacts ontact ize Insert rrangement ervice ating umber of ontacts ontact ize OTT 16 12 8 4 0
I-T-22992, QW contact arrangements ront ace of in Insert or ear of ocket Insert Illustrated Insert rrangement ervice ating umber of ontacts ontact ize 20-33 22-1 22-2 22-4 22-5 11 2 3 2 2 2 4 16 8 8 8 12 12 16 Insert rrangement ervice ating umber of ontacts ontact ize 22-6 22-7 22-8 22-9 22-10 2 1 1 2 3 4 8 16 0 12 12 16 U T V Insert rrangement ervice ating umber of ontacts ontact ize 22-11 22-12 22-13 22-14 22-15 = ;,,, = = ;,,,, = 2 2 3 4 1 19 5 1 16 8 16 1216 16 1216 OTT 16 12 8 4 0 954-888-1024 33
I-T-22992, QW contact arrangements ront ace of in Insert or ear of ocket Insert Illustrated Insert rrangement ervice ating umber of ontacts ontact ize 22-16 22-17 22-18 22-19 22-20 = ; al. =,,,, = ;,, = 3 6 1 8 8 14 9 12 16 12 16 16 16 16 Insert rrangement ervice ating umber of ontacts ontact ize 22-21 22-22 22-23 22-24 22-27 = ; al. =,, = ;,, = = ; al. = 1 2 4 8 2 4 1 8 016 8 12 12 16 816 Insert rrangement ervice ating umber of ontacts ontact ize 22-28 22-33 22-34 22-36 24-2,,, = ;,, = = ; al. = 7 7 3 2 8 7 12 16 12 16 12 12 OTT 16 12 8 4 0 34 954-888-1024
I-T-22992, QW contact arrangements ront ace of in Insert or ear of ocket Insert Illustrated I O Insert rrangement ervice ating umber of ontacts ontact ize 24-3 24-5 24-6 24-7 24-9,, = ; al. = 2 5 16 8 2 14 2 12 16 16 12 12 16 4 I Insert rrangement ervice ating umber of ontacts ontact ize 24-10 24-11 24-12 24-16 24-17,,, = ;,, = 7 3 6 2 3 1 3 3 2 3 8 8 12 4 12 8 12 16 12 16 Q T U V W X Y Z Insert rrangement ervice ating umber of ontacts ontact ize 24-20 24-21 24-22 24-27 24-28 Inst. 2 9 1 9 4 7 24 12 16 816 8 16 16 954-888-1024 OTT 16 12 8 4 0 35
36 954-888-1024 I-T-22992, QW contact arrangements 28-1 28-2 28-3 28-4,, = ; al. =,, = ; al. = 3 6 2 12 3 2 7 8 12 1216 8 12 16 28-5 28-6 28-7 28-8, = ; = ; al. = 2 1 2 3 2 2 10 4 1216 4 4 1216 28-9 28-10 28-11 28-12 = ; al. = 6 6 2 2 3 4 18 26 12 16 4 8 12 12 16 16 I T U V W X T U V W X Y Z a b d ront ace of in Insert or ear of ocket Insert Illustrated Insert rrangement ervice ating umber of ontacts ontact ize Insert rrangement ervice ating umber of ontacts ontact ize Insert rrangement ervice ating umber of ontacts ontact ize OTT 16 12 8 4 0
I-T-22992, QW contact arrangements ront ace of in Insert or ear of ocket Insert Illustrated 100 a T Z b U Y d V X W T U V W X Y Z a b c e g d h f j k l m T V U Q 100 otation of 28-12 Insert rrangement ervice ating umber of ontacts ontact ize 28-13 28-15 28-16 28-17 = ;,, = ; to = 26 35 20 15 16 16 16 16 T U V W X Z a b c d e f h k m g j n p r s Insert rrangement ervice ating umber of ontacts ontact ize 28-18 28-19 28-20 28-21 = ;,,,, = ;, = ; al. = Inst., = ; = ; al = 12 4 6 10 4 37 16 12 16 12 16 16 Insert rrangement ervice ating umber of ontacts ontact ize 28-22 32-1 32-2 32-3 = ; al. = 3 3 2 3 3 2 1 2 2 4 4 16 0 12 4 16 0 4 1216 954-888-1024 OTT 16 12 8 4 0 37
38 954-888-1024 I-T-22992, QW contact arrangements 32-4 32-5 32-6 32-7,,, = ; al. =,,h, j = Inst; al. = 2 12 2 2 3 2 16 7 28 12 16 0 4 8 12 16 1216 O O T U V W I X I O T U V W X Y Z a b c d e f g h j k 32-8 32-9 32-10 32-12, =, = ;, = ;, =,,,, = ; al. = 6 24 2 12 2 2 3 5 10 12 16 4 16 4 8 16 1216 I O T U V W X Y Z a b c d e O I 100 otation of 32-6 32-13 32-15 32-16 32-17 5 18 2 6 2 3 2 16 4 12 16 0 12 4 8 12 16 4 100 I O T U V W X T U V W X Y Z ront ace of in Insert or ear of ocket Insert Illustrated Insert rrangement ervice ating umber of ontacts ontact ize Insert rrangement ervice ating umber of ontacts ontact ize Insert rrangement ervice ating umber of ontacts ontact ize OTT 16 12 8 4 0
I-T-22992, QW contact arrangements ront ace of in Insert or ear of ocket Insert Illustrated 20 21 1 19 2 36 22 23 18 35 3 34 44 37 24 4 17 43 38 33 45 25 16 5 42 39 32 26 6 15 46 31 41 40 27 14 7 28 13 30 29 8 12 9 11 10 I O T U V W Insert rrangement ervice ating umber of ontacts ontact ize 32-73 36-1 36-3 46 4 18 3 3 16 12 16 012 Insert rrangement ervice ating umber of ontacts ontact ize 36-4 36-5 36-6 = ;, = 3 4 2 4 0 0 0 4 I O T U V W X Y Z a b c h n r d j x u e f g k t p v w z y s m I O V W T Y U a X Z b c d e f g k h j n p m r s u t v w x z y d e f U Z a V Y W b c X T I O Insert rrangement ervice ating umber of ontacts ontact ize 36-7 36-8 36-9 740 1 46 1 2 14 14 12 16 12 16 4 8 12 16 954-888-1024 OTT 16 12 8 4 0 39
I-T-22992, QW contact arrangements ront ace of in Insert or ear of ocket Insert Illustrated O Q T U V W X Y Z a b c d e f g h j k m n p q r s t u v w x y z 100 O Q T U V W X Y Z a b c d e f g h j k m n p q r s t u v w x y z 110 O Q T U V W X Y Z a b c d e f g h j k q m n p r s t u v w x y z 100 otation 110 otation of 36-10 of 36-10 Insert rrangement ervice ating umber of ontacts ontact ize 36-10 36-11 36-12 48 48 48 16 16 16 Q I Q Q d c k j b h a Z T U V e m f W g X Y Insert rrangement ervice ating umber of ontacts ontact ize 36-13 36-14 36-15,, Q = ; al. = = ; al. = 2 15 5 5 6 35 12 16 8 1216 16 100 I O T U V W X Y Z a b c d e f g h j t k n p m u w v r s x y z 110 I O T U V W X Y Z a b c e d f g m h j t k n u v p w r s x y z 100 d e U Z a V Y f W b c X T I O 100 otation 110 otation 100 otation of 36-7 of 36-7 of 36-9 Insert rrangement ervice ating umber of ontacts ontact ize 36-16 36-17 36-18 740 7 40 1 2 14 14 12 16 12 16 4 8 12 16 OTT 16 12 8 4 0 40 954-888-1024
I-T-22992, QW contact arrangements ront ace of in Insert or ear of ocket Insert Illustrated T U V W X Y Z a b c d e h j f g k m T U V W X Y Z a b c d f g h i j k m n p q r s t u v w x y z I O T U V W X Y Z a b c d e Insert rrangement ervice ating umber of ontacts ontact ize 36-20 36-52 40-1 2 2 30 52 6 24 8 1216 16 1216 I O Q T U V W X Y Z a b c d g h i e f l m j o k n p q r s t u T U V W X Y Z a b c d f g q h i j k m n p r s t u v w x y z T U W X Y V Z T U V r f s Y T V W X Y Z T U V W Z a b c d g h i j k m n p t u v w x y z T U V W X Y Z U q X Insert rrangement ervice ating umber of ontacts ontact ize 40-9 40-56 44-52 1 2224 85 104 8 1216 16 16 OTT 16 12 8 4 0 954-888-1024 41
I-T-22992, QW 17343 wall mount receptacle (T) Z W (T) T 4 O V T hell ize Thread lass 2 (lated) 0.1-0.2 ouble tub in ull Thd +.021.020 ll dimensions for reference only. * To complete part number, see how to order, pg. 27. +.010.000 (T) +.021.020 T ia +.004.003 V Thread lass 2- (lated) W ±.010 12.8750.672.937.797.906 1.188.150.750-20U.640.700 14 1.0000.672.937.797.969 1.281.150.875-20U.640.700 16 1.1250.672.937.797 1.062 1.375.150 1.000-20U.640.700 18 1.2500.672.953.797 1.156 1.500.177 1.125-18U.625.686 20 1.3750.672.953.797 1.250 1.625.177 1.250-18U.625.686 22 1.5000.672.953.797 1.375 1.750.177 1.375-18U.625.686 24 1.7500.672 1.047.859 1.562 2.000.177 1.625-18U.594.585 28 2.0000.672 1.047.859 1.750 2.250.177 1.875-16U.594.591 32 2.2500.672 1.109.922 1.938 2.500.209 2.0625-16U.530.528 36 2.5000.672 1.109.922 2.188 2.750.209 2.3125-16U.530.528 40 2.7500.672 1.109.922 2.375 3.000.209 2.625-16U.703.528 44 3.0000.672 1.109.922 2.625 3.250.209 2.875-16U.703.770 48 3.2500.672 1.109.922 2.875 3.500.209 3.125-16U.703.770 Z ax 42 954-888-1024
I-T-22992, QW 17345 cable connecting plug Z W V T hell ize Thread lass 2 (lated) 0.1-0.2 ouble tub +.016.000 +.021.020 +.021.020 V Thread lass 2- (lated) W ±.010 Z ax 12.8750.688.938 1.000.750-20U.641.696 14 1.0000.688.938 1.094.875-20U.641.696 16 1.1250.688.938 1.281 1.000-20U.641.696 18 1.2500.703.957 1.375 1.125-18U.625.680 20 1.3750.703.957 1.500 1.250-18U.625.680 22 1.5000.703.957 1.625 1.375-18U.625.680 24 1.7500.766 1.016 1.875 1.625-18U.625.617 28 2.0000.766 1.016 2.125 1.875-16U.625.617 32 2.2500.703 1.078 2.375 2.0625-16U.563.555 36 2.5000.703 1.078 2.625 2.3125-16U.563.555 40 2.7500.703 1.078 3.000 2.625-16U.703.555 44 3.0000.703 1.078 3.250 2.875-16U.703.805 ll dimensions for reference only. * To complete part number, see how to order, pg. 27. 954-888-1024 43
I-T-22992, QW 17346 box mount receptacle (T) Z W (T) Y T 4 O hell ize Thread lass 2 (lated) 0.1-0.2 ouble tub in ull Thd +.021.010 +.010.000 (T) +.021.020 T ia +.004.003 W +.020.030 Y +.011.010 12.8750.672.938.797.906 1.188.150.640.640.700 14 1.0000.672.938.797.969 1.281.150.640.765.700 16 1.1250.672.938.797 1.062 1.375.150.640.890.700 18 1.2500.672.953.797 1.156 1.500.177.625 1.015.686 20 1.3750.672.953.797 1.250 1.625.177.625 1.171.686 22 1.5000.672.953.797 1.375 1.750.177.625 1.296.686 24 1.7500.672 1.047.859 1.562 2.000.177.594 1.421.585 28 2.0000.672 1.047.859 1.750 2.250.177.594 1.625.591 32 2.2500.672 1.110.922 1.938 2.500.209.531 1.891.528 36 2.5000.672 1.110.922 2.188 2.750.209.531 2.078.528 40 2.7500.672 1.110.922 2.375 3.000.209.531 2.312.528 44 3.0000.672 1.110.922 2.625 3.250.209.531 2.562.778 Z ax ll dimensions for reference only. * To complete part number, see how to order, pg. 27. 44 954-888-1024
I-T-22992, QW 17347 jam nut receptacle (wall mount) Z W hell ize ia. +.005.000 ±.003 U ±.005 12,13 1.005.562.688.632 ±.010 OUTI IIO V T 14,15 1.130.606.750 16,17 1.255.699.875 18 1.380.739.938 U.125 ±.002 I. I 20 1.505.783 1.000 22 1.630.830 1.062 24 1.880.919 1.188 U 28 2.130 1.007 1.312 32 2.380 1.096 1.438 36 2.630 1.183 1.562 40 2.880 1.292 1.703 hell ize Thread lass 2 (lated) 0.1-0.2 ouble tud Thread lass 2 (lated) ll dimensions for reference only. * To complete part number, see how to order, pg. 27. ex +.017.016 anel Thickness in ax ±.010 +.021.020 ±.010 +.011.010 V Thread lass 2- (lated) 12.8750 1.000-20U 1.250.094.188 1.141.641.486 1.375.750-20U.516.483 14 1.0000 1.125-18U 1.312.094.188 1.141.641.530 1.500.875-20U.516.483 16 1.1250 1.250-18U 1.500.094.188 1.141.703.623 1.750 1.000-20U.516.483 18 1.2500 1.375-18U 1.562.094.203 1.156.703.663 1.875 1.125-18U.516.467 20 1.3750 1.500-18U 1.750.094.203 1.156.703.707 2.000 1.250-18U.516.467 22 1.5000 1.625-18U 1.875.094.203 1.156.703.751 2.125 1.375-18U.516.467 24 1.7500 1.875-16U 2.125.094.265 1.219.703.840 2.375 1.625-18U.516.404 28 2.0000 2.125-16U 2.375.094.277 1.231.785.928 2.625 1.875-16U.516.392 32 2.2500 2.375-16U 2.625.094.215 1.231.785 1.017 2.875 2.0625-16U.516.392 36 2.5000 2.625-16U 2.875.094.215 1.231.785 1.104 3.125 2.3125-16U.516.392 40 2.7500 2.875-16U 3.125.094.215 1.231.972 1.213 3.406 2.625-16U.703.392 44 3.0000 3.125-16U 3.375.094.215 1.231.972 1.299 3.656 2.875-16U.703.642 W ±.010 Z ax 954-888-1024 45
QW thru bulkhead receptacle (T) (T) T 4 O.672 I. U T.155.672 I. U T hell ize Thread lass 2 (lated) 0.1-0.2 ouble tub ax ±.015 +.000.010 (T) +.021.020 12.8750.312 2.219 1.032.906 1.188.150 14 1.0000.312 2.219 1.032.969 1.281.150 16 1.1250.312 2.219 1.032 1.062 1.375.150 18 1.2500.312 2.219 1.032 1.156 1.500.177 20 1.3750.312 2.219 1.032 1.250 1.625.177 22 1.5000.312 2.219 1.032 1.375 1.750.177 24 1.7500.312 2.219 1.032 1.562 2.000.177 28 2.0000.312 2.219 1.032 1.750 2.250.177 32 2.2500.312 2.219 1.032 1.938 2.500.209 36 2.5000.312 2.219 1.032 2.188 2.750.209 40 2.7500.312 2.219 1.032 2.375 3.000.209 44 3.0000.447 2.469 1.157 2.625 3.250.209 T ia +.004.003 ll dimensions for reference only. * To complete part number, see how to order, pg. 27. 46 954-888-1024
I-T-22992, QW 17344 straight plug Z.766 ±.005 Q V T hell ize Thread lass 2 0.1-0.2 ouble tub +.010.001 +.011.010 Q ia ax V Thread lass 2- (lated) 12.8750.519±.020.985.030±.030.738 1.156.750-20U.807 14 1.0000.519±.020 1.109.013±.030.738 1.281.875-20U.807 16 1.1250.519±.020 1.235.091±.030.738 1.469 1.000-20U.807 18 1.2500.519±.020 1.359.216±.030.738 1.563 1.125-18U.807 20 1.3750.519±.020 1.485.216±.030.738 1.688 1.250-18U.807 22 1.5000.519±.020 1.609.216±.030.738 1.844 1.375-18U.807 24 1.7500.519±.020 1.859.184±.030.800 2.094 1.625-18U.807 28 2.0000.519±.020 2.109.184±.030.800 2.344 1.875-16U.807 32 2.2500.525±.026 2.359.190±.033.875 2.594 2.0625-16U.807 36 2.5000.525±.026 2.609.234±.033.875 2.844 2.3125-16U.807 40 2.7500.710±.023 2.922.049±.030 1.041 3.156 2.625-16U.807 44 3.0000.710±.023 3.172.049±.030 1.041 3.406 2.875-16U.957 Z ax ll dimensions for reference only. * To complete part number, see how to order, pg. 27. 954-888-1024 47
I-T-22992, QW 17348 jam nut receptacle (box mount) Z Y hell ize ia. +.005.000 ±.003 U ±.005 12,13 1.005.562.688 OUTI IIO.632 ±.010 14,15 1.130.606.750 16,17 1.255.699.875 18 1.380.739.938 U.125 ±.003 I. I 20 1.505.783 1.000 22 1.630.830 1.062 24 1.880.919 1.188 U 28 2.130 1.007 1.312 32 2.380 1.096 1.438 36 2.630 1.183 1.562 40 2.880 1.292 1.703 hell ize Thread lass 2 (lated) 0.1-0.2 ouble tud +.006.005 ll dimensions for reference only. * To complete part number, see how to order, pg. 27. Thread lass 2 (lated) ex +.017.016 in anel Thickness 12.8750.125 1.000-20U 1.250.094.297 1.578 1.235.486 1.375.640.483 14 1.0000.125 1.125-18U 1.312.094.297 1.578 1.235.530 1.500.765.483 16 1.1250.188 1.250-18U 1.500.094.297 1.578 1.235.623 1.750.890.483 18 1.2500.188 1.375-18U 1.562.094.266 1.578 1.203.663 1.875 1.015.467 20 1.3750.188 1.500-18U 1.750.094.266 1.578 1.203.707 2.000 1.171.467 22 1.5000.188 1.625-18U 1.875.094.266 1.578 1.203.751 2.125 1.296.467 24 1.7500.188 1.875-16U 2.125.094.328 1.641 1.266.840 2.375 1.421.404 28 2.0000.219 2.125-16U 2.375.094.328 1.641 1.329.928 2.625 1.625.392 32 2.2500.219 2.375-16U 2.625.094.328 1.641 1.329 1.017 2.875 1.891.392 36 2.5000.219 2.625-16U 2.875.094.328 1.641 1.329 1.104 3.125 2.078.392 40 2.7500.219 2.875-16U 3.125.094.328 1.641 1.329 1.213 3.406 2.312.392 44 3.0000.219 3.125-16U 3.375.094.328 1.641 1.329 1.299 3.656 2.562.642 ax +.011.010 ±.010 ±.010 +.011.010 Y +.011.010 Z ax 48 954-888-1024
I-T-22992, QW OI 85049 cable sealing adapters (plug) T TIO - 1.500 X. Q Type I T 1.500 X Q Type II T TIO - Q 1.500 X Type III 954-888-1024 49
I-T-22992, QW OI 85049 cable sealing adapters (plug) art umber* uperseded art umber Used With hell ize ax ia able ange in ia +.000.010 +.000.010 Thread lass 2- ree ength ax +.010.020 ia +.010.020 ax ±.031 +.015.025 Thread lass 2 (lated) 0.1-0.2 ouble tub 85049/411 1734211 12.530.436 1.000.812.750-20U 1.062 2.719.938 4.275 1.375 1.219.8750 5.000 III 85049/421 1734221 12.500.406.875.938.750-20U.969 2.215.938 3.678 1.125.871.8750 5.000 III 85049/431 1734231 12.405.311 1.000.812.750-20U 1.062 2.719.938 4.275 1.375 1.219.8750 5.000 III 85049/311 1734011 12.375.281.750.812.750-20U.969 1.902.938 3.365 1.062.621.8750 5.000 I 85049/321 1734021 12.281.188.750.812.750-20U.969 1.902.938 3.365 1.062.621.8750 5.000 I 85049/511 1734111 12.250.156.825.812.750-20U.906 1.782.938 3.182.938.563.8750 5.000 II 85049/451 1734251 14.625.531 1.062 1.125.875-20U 1.062 2.933 1.062 4.489 1.562 1.371 1.0000 5.000 III 85049/441 1734241 14.605.511 1.000 1.062.875-20U 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 5.000 III 85049/461 1734261 14.530.436 1.000 1.062.875-20U 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 5.000 III 85049/331 1734031 14.438.344.875.938.875-20U.969 2.215 1.062 3.678 1.125.871 1.0000 5.000 I 85049/471 1734271 14.405.311 1.000 1.062.875-20U 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 5.000 III 85049/341 1734041 16.605.511 1.000 1.062 1.000-20U 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 5.000 I 85049/351 1734051 16.530.436 1.000 1.062 1.000-20U 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 5.000 I 85049/361 1734061 16.405.311 1.000 1.062 1.000-20U 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 5.000 I 85049/481 1734281 18.828.715 1.188 1.250 1.125-18U 1.094 2.996 1.312 4.584 1.688 1.343 1.2500 5.000 III 85049/381 1734081 18.699.605 1.062 1.125 1.125-18U 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I 85049/371 1734071 18.625.531 1.062 1.125 1.125-18U 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I 85049/551 1734151 18.605.511 1.000 1.125 1.125-18U 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 5.000 II 85049/561 1734161 18.530.436 1.000 1.125 1.125-18U 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 5.000 II 85049/391 1734091 18.500.406 1.062 1.125 1.125-18U 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I 85049/3101 17340101 18.455.361 1.062 1.125 1.125-18U 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 5.000 I 85049/521 1734121 18.375.281.750 1.125 1.125-18U.969 2.438 1.312 3.901 1.062 1.157 1.2500 5.000 II 85049/531 1734131 18.375.281.875 1.125 1.125-18U.969 2.469 1.312 3.932 1.125 1.125 1.2500 5.000 II 85049/541 1734141 18.281.188.750 1.125 1.125-18U.969 2.438 1.312 3.901 1.062 1.157 1.2500 5.000 II 85049/4121 17342121 20 1.055.930 1.546 1.375 1.250-18U 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 5.000 III 85049/4101 17342101 20 1.000.875 1.546 1.375 1.250-18U 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 5.000 III 85049/4111 17342111 20.900.787 1.312 1.375 1.250-18U 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 5.000 III 85049/3111 17340111 20.828.715 1.188 1.250 1.250-18U 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 5.000 I 85049/491 1734291 20.750.637 1.312 1.375 1.250-18U 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 5.000 III 85049/571 1734171 20.699.605 1.062 1.250 1.250-18U 1.062 2.933 1.438 4.489 1.562 1.371 1.3750 5.000 II 85049/591 1734191 20.605.511 1.000 1.250 1.250-18U 1.062 2.750 1.438 4.308 1.375 1.250 1.3750 5.000 II 85049/3121 17340121 20.562.449 1.188 1.250 1.250-18U 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 5.000 I 85049/581 1734181 20.455.361 1.062 1.250 1.250-18U 1.062 2.933 1.438 4.489 1.562 1.371 1.3750 5.000 II 85049/4141 17342141 22 1.109.984 1.546 1.625 1.375-18U 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 6.000 III 85049/4131 17342131 22 1.000.875 1.546 1.625 1.375-18U 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 6.000 III 85049/3141 17340141 22.900.787 1.312 1.375 1.375-18U 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 I 85049/5141 17341141 22.828.715 1.188 1.406 1.375-18U 1.094 2.996 1.562 4.306 1.375 1.250 1.5000 6.000 II 85049/3151 17340151 22.805.692 1.312 1.375 1.375-18U 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 I 85049/3131 17340131 22.750.637 1.312 1.375 1.375-18U 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 I 85049/5101 17341101 22.562.449 1.188 1.406 1.375-18U 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 6.000 II 85049/5111 17341111 22.405.311 1.000 1.375 1.375-18U 1.062 2.750 1.562 4.306 1.375 1.250 1.5000 6.000 II Q pprox. Type ll dimensions for reference only. *Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either part number (column 1). numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 50 954-888-1024
I-T-22992, QW OI 85049 cable sealing adapters (plug) art umber* uperseded art umber Used With hell ize ax ia able ange in ia +.000.010 +.000.010 Thread lass 2-85049/4181 17342181 24 1.375 1.250 2.000 1.875 1.625-18U 1.281 3.184 1.812 4.959 2.625 1.309 1.7500 6.000 III 85049/4161 17342161 24 1.310 1.185 1.780 1.875 1.625-18U 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 6.000 III 85049/4171 17342171 24 1.230 1.105 1.780 1.875 1.625-18U 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 6.000 III 85049/4151 17342151 24 1.180 1.055 1.780 1.875 1.625-18U 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 6.000 III 85049/3181 17340181 24 1.109.984 1.546 1.625 1.625-18U 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I 85049/3161 17340161 24 1.055.930 1.546 1.625 1.625-18U 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I 85049/3171 17340171 24 1.000.675 1.546 1.625 1.625-18U 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I 85049/5161 17341161 24.970.857 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II 85049/5131 17341131 24.900.787 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II 85049/5191 17340191 24.880.755 1.546 1.625 1.625-18U 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 6.000 I 85049/5171 17341171 24.828.715 1.188 1.625 1.625-18U 1.094 2.954 1.812 4.542 1.688 1.301 1.7500 6.000 II 85049/5181 17341181 24.805.692 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II 85049/5151 17341151 24.750.637 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II 85049/5141 17341141 24.630.517 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 6.000 II 85049/4201 17342201 28 1.531 1.406 2.000 2.062 1.875-16U 1.281 3.246 2.062 5.021 2.625 1.371 2.000 6.000 III 85049/4191 17342191 28 1.445 1.320 2.000 2.062 1.875-16U 1.281 3.246 2.062 5.021 2.625 1.371 2.000 6.000 III 85049/4211 17342211 28 1.375 1.250 2.000 2.062 1.875-16U 1.281 3.246 2.062 5.021 2.625 1.371 2.000 6.000 III 85049/4221 17340221 28 1.310 1.185 1.780 1.875 1.875-16U 1.281 3.184 2.062 4.959 2.469 1.372 2.000 6.000 I 85049/3211 17340211 28 1.230 1.105 1.780 1.875 1.875-16U 1.281 3.184 2.062 4.959 2.469 1.372 2.000 6.000 I 85049/3201 17340201 28 1.180 1.055 1.780 1.875 1.875-16U 1.281 3.184 2.062 4.959 2.469 1.372 2.000 6.000 I 85049/5201 17341201 28 1.109.984 1.546 1.875 1.875-16U 1.281 3.121 2.062 4.896 2.125 1.371 2.000 6.000 II 85049/5241 17341241 28 1.100.875 1.546 1.875 1.875-16U 1.281 3.121 2.062 4.896 2.125 1.371 2.000 6.000 II 85049/5231 17341231 28.970.857 1.312 1.875 1.875-16U 1.094 3.059 2.062 4.647 1.812 1.371 2.000 6.000 II 85049/5191 17341191 28.880.755 1.546 1.875 1.875-16U 1.281 3.121 2.062 4.896 2.125 1.371 2.000 6.000 II 85049/5211 17341211 28.750.637 1.312 1.875 1.875-16U 1.094 3.059 2.062 4.647 1.812 1.371 2.000 6.000 II 85049/5261 17341261 28.680.567 1.312 1.875 1.875-16U 1.094 3.059 2.062 4.647 1.812 1.371 2.000 6.000 II 85049/5251 17341251 28.530.436 1.000 1.812 1.875-16U 1.062 2.875 2.062 4.431 1.375 1.375 2.000 6.000 II 85049/5221 17341221 28.375.281.875 1.875 1.875-16U.969 2.766 2.062 4.229 1.125 1.422 2.000 6.000 II 85049/4231 17342231 32 1.828 1.700 2.438 2.312 2.0625-16U 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 6.000 III 85049/4251 17342251 32 1.730 1.605 2.438 2.312 2.0625-16U 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 6.000 III 85049/4221 17342221 32 1.656 1.531 2.250 2.312 2.0625-16U 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 6.000 III 85049/4241 17342241 32 1.562 1.437 2.250 2.312 2.0625-16U 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 6.000 III 85049/3241 17340241 32 1.531 1.406 2.000 2.062 2.0625-16U 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 6.000 I 85049/3231 17340231 32 1.445 1.320 2.000 2.062 2.0625-16U 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 6.000 I 85049/3251 17340251 32 1.375 1.250 2.000 2.062 2.0625-16U 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 6.000 I 85049/5281 17341281 32 1.230 1.150 1.780 2.062 2.0625-16U 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 6.000 II 85049/5351 17341351 32 1.130 1.005 1.780 2.062 2.0625-16U 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 6.000 II 85049/5311 17341311 32 1.109.984 1.546 2.062 2.0625-16U 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 6.000 II 85049/5271 17341271 32 1.055.930 1.546 2.062 2.0625-16U 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 6.000 II 85049/5321 17341321 32.970.857 1.312 2.062 2.0625-16U 1.094 3.059 2.312 4.647 1.812 1.371 2.2500 6.000 II 85049/5301 17341301 32.880.755 1.546 2.062 2.0625-16U 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 6.000 II 85049/5291 17341291 32.750.637 1.312 2.062 2.0625-16U 1.094 3.059 2.312 4.647 1.812 1.371 2.2500 6.000 II ree ength ax +.010.020 ia +.010.020 ax ±.031 +.015.025 Thread lass 2 (lated) 0.1-0.2 ouble tub Q pprox. Type ll dimensions for reference only. *Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either part number (column 1). numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 954-888-1024 51
I-T-22992, QW OI 85049 cable sealing adapters (plug) art umber* uperseded art umber Used With hell ize able ange ax ia in ia +.000.010 +.000.010 Thread lass 2- ree ength ax +.010.020 ia +.010.020 ax ±.031 +.015.025 Thread lass 2 (lated) 0.1-0.2 ouble tub 85049/5341 17341341 32.530.436 1.000 2.000 2.0625-16U 1.062 2.875 2.312 4.431 1.375 1.375 2.2500 6.000 II 85049/5331 17341331 32.375.281.875 2.062 2.0625-16U.969 2.813 2.312 4.276 1.125 1.469 2.2500 6.000 II 85049/4301 17342301 36 2.062 1.917 2.750 2.500 2.3125-16U 1.391 3.500 2.562 5.385 3.375 1.375 2.5000 6.000 III 85049/4291 17342291 36 1.984 1.859 2.438 2.500 2.3125-16U 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III 85049/4261 17342261 36 1.900 1.775 2.438 2.500 2.3125-16U 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III 85049/4281 17342281 36 1.825 1.799 2.438 2.500 2.3125-16U 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III 85049/4271 17342271 36 1.730 1.605 2.438 2.500 2.3125-16U 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 6.000 III 85049/3261 17340261 36 1.656 1.531 2.250 2.312 2.3125-16U 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 6.000 I 85049/3271 17340271 36 1.562 1.437 2.250 2.312 2.3125-16U 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 6.000 I 85049/5401 17341401 36 1.445 1.320 2.000 2.312 2.3125-16U 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 6.000 II 85049/5381 17341381 36 1.375 1.250 2.000 2.312 2.3125-16U 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 6.000 II 85049/5361 17341361 36 1.310 1.185 1.780 2.312 2.3125-16U 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 6.000 II 85049/5421 17341421 36 1.230 1.105 1.780 2.312 2.3125-16U 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 6.000 II 85049/5391 17341391 36 1.180 1.055 1.780 2.312 2.3125-16U 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 6.000 II 85049/5371 17341371 36 1.109.984 1.546 2.312 2.3125-16U 1.281 3.121 2.562 4.896 2.125 1.371 2.5000 6.000 II 85049/5411 17341411 36.970.857 1.312 2.250 2.3125-16U 1.094 3.063 2.562 4.651 1.812 1.375 2.5000 6.000 II 85049/4311 17342311 40 2.375 2.230 3.000 2.812 2.625-16U 1.391 3.609 2.875 5.682 3.625 1.421 2.7500 6.000 III 85049/4321 17342321 40 2.250 2.105 2.875 2.625 2.625-16U 1.391 3.609 2.875 5.682 3.500 1.421 2.7500 6.000 III 85049/4331 17342331 40 2.145 2.000 2.750 2.625 2.625-16U 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 6.000 III 85049/4341 17342341 40 2.062 1.917 2.750 2.625 2.625-16U 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 6.000 III 85049/5431 17341431 40 1.940 1.815 2.438 2.750 2.625-16U 1.391 4.281 2.875 6.354 3.171 2.156 2.7500 6.000 II 85049/5441 17341441 40 1.825 1.700 2.438 2.750 2.625-16U 1.391 4.281 2.875 6.354 3.171 2.156 2.7500 6.000 II 85049/5451 17341451 40 1.730 1.605 2.438 2.750 2.625-16U 1.391 4.281 2.875 6.354 3.171 2.156 2.7500 6.000 II 85049/5461 17341461 40 1.656 1.531 2.250 2.750 2.625-16U 1.281 4.094 2.875 6.037 2.953 2.156 2.7500 6.000 II Q pprox. Type ll dimensions for reference only. *Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either part number (column 1). numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 52 954-888-1024
I-T-22992, QW OI 85049 cable sealing adapters (receptacle) T Q TIO - Type I T Q Type II T TIO - Q Type III 954-888-1024 53
I-T-22992, QW OI 85049 cable sealing adapters (receptacle) art umber* uperseded art umber Used With hell ize able ange ax ia in ia +.000.010 +.000.010 Thread lass 2- ree ength ax +.010.020 ia +.010.020 ax ±.031 +.015.025 Thread lass 2 0.1-0.2 ouble tub 85049/411 1734211 12.530.436 1.000.812.750-20U 1.062 2.719.938 4.275 1.375 1.219.8750 2.719.765 5.000 III 85049/421 1734221 12.500.406.875.938.750-20U.969 2.215.938 3.678 1.125.871.8750 2.719.765 5.000 III 85049/431 1734231 12.405.311 1.000.812.750-20U 1.062 2.719.938 4.275 1.375 1.219.8750 1.094.765 5.000 III 85049/311 1734011 12.375.281.750.812.750-20U.969 1.902.938 3.365 1.062.621.8750 1.094.765 5.000 I 85049/321 1734021 12.281.188.750.812.750-20U.969 1.902.938 3.365 1.062.621.8750 1.094.765 5.000 I 85049/511 1734111 12.250.156.625.812.750-20U.906 1.782.938 3.182.938.563.8750 1.094.765 5.000 II 85049/451 1734251 14.625.531 1.062 1.125.875-20U 1.062 2.933 1.062 4.489 1.562 1.371 1.0000 1.094.765 5.000 III 85049/441 1734241 14.605.511 1.000 1.062.875-20U 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 1.094.765 5.000 III 85049/461 1734261 14.530.436 1.000 1.062.875-20U 1.062 2.621 1.062 4.177 1.375 1.121 1.0000 1.094.765 5.000 III 85049/331 1734031 14.438.344.875.938.875-20U.969 2.215 1.062 3.678 1.125.871 1.0000 1.219.765 5.000 I 85049/471 1734271 14.405.311 1.000 1.062.875-20U 1.062 2.621 1.188 4.177 1.375 1.121 1.0000 1.344.765 5.000 III 85049/341 1734041 16.605.511 1.000 1.062 1.000-20U 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 1.344.980 5.000 I 85049/351 1734051 16.530.436 1.000 1.062 1.000-20U 1.062 2.621 1.188 4.177 1.375 1.121 1.1250 1.344.980 5.000 I 85049/361 1734061 16.405.311 1.000 1.062 1.000-20U 1.062 2.621 1.312 4.177 1.375 1.121 1.1250 1.344.980 5.000 I 85049/481 1734281 18.828.715 1.188 1.250 1.125-18U 1.094 2.996 1.312 4.584 1.688 1.343 1.2500 1.469.980 5.000 III 85049/381 1734081 18.699.605 1.062 1.125 1.125-18U 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469.980 5.000 I 85049/371 1734071 18.625.531 1.062 1.125 1.125-18U 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469.980 5.000 I 85049/551 1734151 18.605.511 1.000 1.125 1.125-18U 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 2.719.980 5.000 II 85049/561 1734161 18.530.436 1.000 1.125 1.125-18U 1.062 2.621 1.312 4.177 1.375 1.121 1.2500 2.719.980 5.000 II 85049/391 1734091 18.500.406 1.062 1.125 1.125-18U 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469.980 5.000 I 85049/3101 17340101 18.455.361 1.062 1.125 1.125-18U 1.062 2.933 1.312 4.489 1.562 1.371 1.2500 1.469.980 5.000 I 85049/521 1734121 18.375.281.750 1.125 1.125-18U.969 2.438 1.312 4.901 1.062 1.157 1.2500 2.719.980 5.000 II 85049/531 1734131 18.375.281.875 1.125 1.125-18U.969 2.469 1.312 4.932 1.125 1.125 1.2500 2.719.980 5.000 II 85049/541 1734141 18.281.188.750 1.125 1.125-18U.969 2.438 1.312 4.901 1.062 1.157 1.2500 2.719.980 5.000 II 85049/4121 17342121 20 1.055.930 1.546 1.375 1.250-18U 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 2.719.980 5.000 III 85049/4101 17342101 20 1.000.875 1.546 1.375 1.250-18U 1.281 3.121 1.438 4.896 2.125 1.371 1.3750 2.719.980 6.000 III 85049/4111 17342111 20.900.787 1.312 1.375 1.250-18U 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 2.719.980 5.000 III 85049/3111 17340111 20.828.715 1.188 1.250 1.250-18U 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 1.562.980 5.000 I 85049/491 1734291 20.750.637 1.312 1.375 1.250-18U 1.094 3.059 1.438 4.647 1.812 1.371 1.3750 2.719.980 5.000 III 85049/571 1734171 20.699.605 1.062 1.250 1.250-18U 1.062 2.933 1.438 4.489 1.562 1.250 1.3750 2.719.980 5.000 II 85049/591 1734191 20.605.511 1.000 1.250 1.250-18U 1.062 2.750 1.438 4.306 1.375 1.371 1.3750 1.562.980 5.000 II 85049/3121 17340121 20.562.449 1.188 1.250 1.250-18U 1.125 2.996 1.438 4.615 1.688 1.371 1.3750 1.562.980 5.000 I 85049/581 1734181 20.455.361 1.062 1.250 1.250-18U 1.062 2.933 1.438 4.489 1.562 1.371 1.3750 1.562.980 5.000 II 85049/4141 17342141 22 1.109.984 1.546 1.625 1.375-18U 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 1.562.980 6.000 III 85049/4131 17342131 22 1.000.875 1.546 1.625 1.375-18U 1.281 3.121 1.562 4.896 2.125 1.371 1.5000 1.562.980 6.000 III 85049/3141 17340141 22.900.787 1.312 1.375 1.375-18U 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 1.688.980 6.000 I 85049/5121 17341121 22.828.715 1.188 1.406 1.375-18U 1.094 2.996 1.562 4.306 1.375 1.250 1.5000 1.688.980 6.000 II 85049/3151 17340151 22.805.692 1.312 1.375 1.375-18U 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 1.688.980 6.000 I 85049/3131 17340131 22.750.637 1.312 1.375 1.375-18U 1.094 3.059 1.562 4.647 1.812 1.371 1.5000 1.688.980 6.000 I 85049/5101 17341101 22.562.449 1.188 1.406 1.375-18U 1.094 2.996 1.562 4.584 1.688 1.343 1.5000 2.719.980 6.000 II 85049/5111 17341111 22.405.311 1.000 1.375 1.375-18U 1.062 2.750 1.562 4.306 1.375 1.250 1.5000 2.719.980 6.000 II ia ax ax Q pprox. Type ll dimensions for reference only. *Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either part number (column 1). numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 54 954-888-1024
I-T-22992, QW OI 85049 cable sealing adapters (receptacle) art umber* uperseded art umber Used With hell ize able ange ax ia in ia +.000.010 +.000.010 Thread lass 2- ree ength ax +.010.020 ia +.010.020 ax ±.031 +.015.025 Thread lass 2 0.1-0.2 ouble tub 85049/4181 17342181 24 1.375 1.250 2.000 1.875 1.625-18U 1.281 3.184 1.812 4.959 2.625 1.309 1.7500 2.719.980 6.000 III 85049/4161 17342161 24 1.310 1.185 1.780 1.875 1.625-18U 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 2.719.980 6.000 III 85049/4171 17342171 24 1.230 1.105 1.780 1.875 1.625-18U 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 2.719.980 6.000 III 85049/4151 17342151 24 1.180 1.055 1.780 1.875 1.625-18U 1.281 3.184 1.812 4.959 2.469 1.372 1.7500 2.719.980 6.000 III 85049/3181 17340181 24 1.109.984 1.546 1.625 1.625-18U 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938.980 6.000 I 85049/3161 17340161 24 1.055.930 1.546 1.625 1.625-18U 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938.980 6.000 I 85049/3171 17340171 24 1.000.675 1.546 1.625 1.625-18U 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938.980 6.000 I 85049/5161 17341161 24.970.857 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719.980 6.000 II 85049/5131 17341131 24.900.787 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719.980 6.000 II 85049/3191 17340191 24.880.755 1.546 1.625 1.625-18U 1.281 3.121 1.812 4.896 2.125 1.371 1.7500 1.938.980 6.000 I 85049/5171 17341171 24.828.715 1.188 1.625 1.625-18U 1.094 2.954 1.812 4.542 1.688 1.301 1.7500 2.719.980 6.000 II 85049/5181 17341181 24.805.692 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719.980 6.000 II 85049/5151 17341151 24.750.637 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719.980 6.000 II 85049/5141 17341141 24.630.517 1.312 1.625 1.625-18U 1.094 3.059 1.812 4.647 1.812 1.371 1.7500 2.719.980 6.000 II 85049/4201 17342201 28 1.531 1.406 2.000 2.062 1.875-16U 1.281 3.246 2.062 5.021 2.625 1.371 2.0000 2.719.980 6.000 III 85049/4191 17342191 28 1.445 1.320 2.000 2.062 1.875-16U 1.281 3.246 2.062 5.021 2.625 1.371 2.0000 2.719.980 6.000 III 85049/4211 17342211 28 1.375 1.250 2.000 2.062 1.875-16U 1.281 3.246 2.062 5.021 2.625 1.371 2.0000 2.719.980 6.000 III 85049/3221 17340221 28 1.310 1.185 1.780 1.875 1.875-16U 1.281 3.184 2.062 4.959 2.469 1.372 2.0000 2.219.980 6.000 I 85049/3211 17340211 28 1.230 1.105 1.780 1.875 1.875-16U 1.281 3.184 2.062 4.959 2.469 1.372 2.0000 2.219.980 6.000 I 85049/3201 17340201 28 1.180 1.055 1.780 1.875 1.875-16U 1.281 3.184 2.062 4.959 2.469 1.372 2.0000 2.219.980 6.000 I 85049/5201 17341201 28 1.109.984 1.546 1.875 1.875-16U 1.281 3.121 2.062 4.896 2.125 1.371 2.0000 2.279.980 6.000 II 85049/5241 17341241 28 1.000.875 1.546 1.875 1.875-16U 1.281 3.121 2.062 4.896 2.125 1.371 2.0000 2.279.980 6.000 II 85049/5231 17341231 28.970.857 1.312 1.875 1.875-16U 1.094 3.059 2.062 4.647 1.812 1.371 2.0000 2.719.980 6.000 II 85049/5191 17341191 28.880.755 1.546 1.875 1.875-16U 1.281 3.121 2.062 4.896 2.125 1.371 2.0000 2.719.980 6.000 II 85049/5191 17341211 28.750.637 1.312 1.875 1.875-16U 1.094 3.059 2.062 4.647 1.812 1.371 2.0000 2.719.980 6.000 II 85049/5261 17341261 28.680.567 1.312 1.875 1.875-16U 1.094 3.059 2.062 4.647 1.812 1.371 2.0000 2.219.980 6.000 II 85049/5251 17341251 28.530.436 1.000 1.812 1.875-16U 1.062 2.875 2.062 4.431 1.375 1.375 2.0000 2.219.980 6.000 II 85049/5221 17341221 28.375.281.875 1.875 1.875-16U.969 2.766 2.062 4.229 1.125 1.422 2.0000 2.219.980 6.000 II 85049/4231 17342231 32 1.828 1.700 2.438 2.312 2.0625-16U 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 2.469.980 6.000 III 85049/4251 17342251 32 1.730 1.605 2.438 2.312 2.0625-16U 1.391 3.500 2.312 5.385 3.171 1.375 2.2500 2.469.980 6.000 III 85049/4221 17342221 32 1.656 1.531 2.250 2.312 2.0625-16U 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 2.469.980 6.000 III 85049/4241 17342241 32 1.562 1.437 2.250 2.312 2.0625-16U 1.281 3.308 2.312 5.083 2.953 1.370 2.2500 2.469.980 6.000 III 85049/3241 17340241 32 1.531 1.406 2.000 2.062 2.0625-16U 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 2.469.980 6.000 I 85049/3231 17340231 32 1.445 1.320 2.000 2.062 2.0625-16U 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 2.469.980 6.000 I 85049/3251 17340251 32 1.375 1.250 2.000 2.062 2.0625-16U 1.281 3.246 2.312 5.021 2.625 1.371 2.2500 2.469.980 6.000 I 85049/5281 17341281 32 1.230 1.150 1.780 2.062 2.0625-16U 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 2.469.980 6.000 II 85049/5351 17341351 32 1.130 1.005 1.780 2.062 2.0625-16U 1.281 3.184 2.312 4.959 2.469 1.372 2.2500 2.469.980 6.000 II 85049/5311 17341311 32 1.109.984 1.546 2.062 2.0625-16U 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 2.469.980 6.000 II 85049/5271 17341271 32 1.055.930 1.546 2.062 2.0625-16U 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 2.469.980 6.000 II 85049/5321 17341321 32.970.858 1.312 2.062 2.0625-16U 1.094 3.059 2.312 4.647 1.812 1.371 2.2500 2.469.980 6.000 II 85049/5301 17341301 32.880.755 1.546 2.062 2.0625-16U 1.281 3.121 2.312 4.896 2.125 1.371 2.2500 2.469.980 6.000 II ia ax ax Q pprox. Type ll dimensions for reference only. *Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either part number (column 1). numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 954-888-1024 55
I-T-22992, QW OI 85049 cable sealing adapters (receptacle) art umber* uperseded art umber Used With hell ize ax ia able ange in ia +.000.010 +.000.010 Thread lass 2- ree ength ax +.010.020 ia +.010.020 ax ±.031 +.015.025 Thread lass 2 0.1-0.2 ouble tub 85049/5291 17341291 32.750.637 1.312 2.062 2.0625-16U 1.094 3.059 2.312 4.647 1.612 1.371 2.2500 2.469.980 6.000 II 85049/5341 17341341 32.530.436 1.000 2.000 2.0625-16U 1.062 2.875 2.312 4.431 1.375 1.375 2.2500 2.469.980 6.000 II 85049/5531 17341331 32.375.281.875 2.062 2.0625-16U.969 2.813 2.312 4.276 1.125 1.469 2.2500 2.469.980 6.000 II 85049/4301 17342301 36 2.062 1.917 2.750 2.500 2.3125-16U 1.391 3.500 2.562 5.385 3.375 1.375 2.5000 2.719.980 6.000 III 85049/4291 17342291 36 1.984 1.859 2.438 2.500 2.3125-16U 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719.980 6.000 III 85049/4261 17342261 36 1.900 1.775 2.438 2.500 2.3125-16U 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719.980 6.000 III 85049/4281 17342281 36 1.825 1.700 2.438 2.500 2.3125-16U 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719.980 6.000 III 85049/4271 17342271 36 1.730 1.605 2.438 2.500 2.3125-16U 1.391 3.469 2.562 5.354 3.171 1.344 2.5000 2.719.980 6.000 III 85049/3261 17340261 36 1.656 1.531 2.250 2.312 2.3125-16U 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 2.719.980 6.000 I 85049/3271 17340271 36 1.562 1.437 2.250 2.312 2.3125-16U 1.281 3.308 2.562 5.083 2.953 1.370 2.5000 2.719.980 6.000 I 85049/5401 17341401 36 1.445 1.320 2.000 2.312 2.3125-16U 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 2.719.980 6.000 II 85049/5381 17341381 36 1.375 1.250 2.000 2.312 2.3125-16U 1.281 3.246 2.562 5.021 2.625 1.371 2.5000 2.719.980 6.000 II 85049/5361 17341361 36 1.310 1.185 1.780 2.312 2.3125-16U 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 2.719.980 6.000 II 85049/5421 17341421 36 1.230 1.105 1.780 2.312 2.3125-16U 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 2.719.980 6.000 II 85049/5391 17341391 36 1.180 1.055 1.780 2.312 2.3125-16U 1.281 3.184 2.562 4.959 2.469 1.372 2.5000 2.719.980 6.000 II 85049/5371 17341371 36 1.109.984 1.546 2.312 2.3125-16U 1.281 3.121 2.562 4.896 2.125 1.371 2.5000 2.719.980 6.000 II 85049/5411 17341411 36.970.857 1.312 2.250 2.3125-16U 1.094 3.063 2.562 4.651 1.812 1.375 2.5000 2.719.980 6.000 II 85049/4311 17342311 40 2.375 2.230 3.000 2.812 2.625-16U 1.391 3.609 2.875 5.682 3.625 1.421 2.7500 2.969.980 6.000 III 85049/4321 17342321 40 2.250 2.105 2.875 2.625 2.625-16U 1.391 3.609 2.875 5.682 3.500 1.421 2.7500 2.969.980 6.000 III 85049/4331 17342331 40 2.145 2.000 2.750 2.625 2.625-16U 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 2.969.980 6.000 III 85049/4341 17342341 40 2.062 1.917 2.750 2.625 2.625-16U 1.391 3.547 2.875 5.620 3.375 1.422 2.7500 2.969.980 6.000 III 85049/5431 17341431 40 1.940 1.815 2.438 2.750 2.625-16U 1.391 4.281 2.875 6.334 3.171 2.156 2.7500 2.969.980 6.000 II 85049/5441 17341441 40 1.825 1.700 2.438 2.750 2.625-16U 1.391 4.281 2.875 6.334 3.171 2.156 2.7500 2.969.980 6.000 II 85049/5451 17341451 40 1.730 1.605 2.438 2.750 2.625-16U 1.391 4.281 2.875 6.334 3.171 2.156 2.7500 2.969.980 6.000 II 85049/5461 17341461 40 1.656 1.531 2.250 2.625 2.625-16U 1.281 4.094 2.875 6.057 2.953 2.156 2.7500 2.969.980 6.000 II ia ax ax Q pprox. Type ll dimensions for reference only. *Ordering procedure: ocate shell size needed (olumn 4); select cable diameter range to be accommodated within the shell size (column 5); order by either part number (column 1). numbers shown are non-conductive finish. To order conductive finish, substitute W for in the part number listed. 56 954-888-1024
I-T-22992, QW OI adapters cable clamp 110-4007-XX(size) adapter 03 for onductive O 04 for ard oat rey nodized V T 3057-( ) cable cable clamp clamp Y Z 3420-( ) sleeve 954-888-1024 57
I-T-22992, QW OI 110-4007-XXXX adapters 3057 cable clamp hell ize dapters art umber Thread lass 2 (lated) in ull Thd ia +.000.010 +.010.020 ±.010 +.010.000 ia ±.010 ax V Thread lass 2-12 110-4007-12XX 3057-4.625-24U.422.386.875.688.484.302.094 1.609 1.375.750-20U.906 14 110-4007-14XX 3057-6.750-20U.422.500 1.000.812.484.428.230 1.609 1.375.875-20U 1.031 16 110-4007-16XX 3057-8.875-20U.422.625 1.188.938.481.515.316 1.609 1.375 1.000-20U 1.125 18 110-4007-18XX 3057-10 1.000-20U.422.752 1.312 1.062.481.614.378 1.609 1.437 1.125-18U 1.234 20 110-4007-20XX 3057-12 1.1875-18U.422.891 1.438 1.250.481.738.445 1.609 1.437 1.250-18U 1.484 22 110-4007-22XX 3057-12 1.1875-18U.422.891 1.562 1.250.481.738.445 1.609 1.437 1.375-18U 1.484 24 110-4007-24XX 3057-16 1.4375-18U.422 1.111 1.812 1.500.481.926.611 1.609 1.562 1.625-18U 1.671 28 110-4007-28XX 3057-16 1.4375-18U.422 1.111 2.062 1.500.481.926.611 1.781 1.562 1.875-16U 1.671 32 110-4007-32XX 3057-20 1.750-18U.484 1.422 2.250 1.875.481 1.200.922 1.781 1.812 2.0625-16U 2.188 36 110-4007-36XX 3057-24 2.000-18U.562 1.672 2.500 2.125.481 1.363.922 1.781 2.062 2.3125-16U 2.344 40 110-4007-40XX 3057-28 2.250-16U.562 1.914 2.812 2.375.672 1.611 1.180 2.032 2.062 2.625-16U 2.594 ll dimensions for reference only. * To attach the cable clamp to the left hand accessory threads of QW connectors, adapter ext3... is needed. Order this proprietary adapter from column 2 and suffix the part number with the finish desired, listed in the finish chart below. ** Order clamp (column 3) to accommodate the cable type being used. tandard finish on the clamp is olive drab, cadmium plate. ree losed Y ax hell ize leeve art umber Z ia ree ±.016 losed 12 3420-4.219.010 14 16 18 20 22 24 28 32 36 40 3420-4 3420-6 3420-6 3420-8 3420-6 3420-10 3420-8 3420-12 3420-8 3420-12 3420-8 3420-12 3420-16 3420-8 3420-12 3420-16 3420-12 3420-16 3420-20 3420-16 3420-18 3420-24 3420-16 3420-20 3420-28.219.312.312.438.312.438.438.541.438.541.438.541.750.438.541.750.541.750.938.750.938 1.125.750.938 1.250.020.114.085.222.085.200.177.270.177.270.186.260.433.186.260.433.273.442.620.358.504.682.368.514.816 leeve not supplied as part of assembly. Order separately by part number shown 58 954-888-1024
I-T-22992 QW OI protective covers 17350 plug protective cover 17349-XX receptacle protective cover 17349-XX receptacle protective cover 954-888-1024 59
I-T-22992, QW OI protective covers hell ize lug rotective over art umber* Thread lass 2 (lated) 0.1-0.2 ouble tub +.010.005 pprox. ax 12 17350-( ).8750.156 5.000 1.500 14 17350-( ) 1.0000.156 5.000 1.500 16 17350-( ) 1.1250.156 5.000 1.500 18 17350-( ) 1.2500.180 5.000 1.500 20 17350-( ) 1.3750.180 5.000 1.500 22 17350-( ) 1.5000.180 6.000 1.500 24 17350-( ) 1.7500.180 6.000 1.500 28 17350-( ) 2.0000.180 6.000 1.500 32 17350-( ) 2.2500.209 6.000 1.500 36 17350-( ) 2.5000.209 6.000 1.500 40 17350-( ) 2.7500.209 6.000 1.500 * Order -approved covers as per coded part number example: T U 17350 28 1 2 3 4 1. umber 17350 designated plug protective cover 17349 designated receptacle protect cover 2. over inish for conductive, for non-conductive. hell ize eceptacle rotective over art umber* Thread lass 2 0.1-0.2 ouble tub +.010.005 pprox. ia. ax +.010.000 ax 3. over ize hell size of connector with which cover is used. 12 14 16 18 20 22 17349-( ) 17349-( ) 17349-( ) 17349-( ) 17349-( ) 17349-( ) 17349-( ) 17349-( ) 17349-( ) 17349-( ) 17349-( ) 17349-( ).8750.156 5.000 1.094 1.016.765 1.0000.156 5.000 1.219 1.141.765 1.1250.156 5.000 1.344 1.266.980 1.2500.180 5.000 1.469 1.391.980 1.3750.180 5.000 1.562 1.516.980 1.5000.180 6.000 1.688 1.641.980 4. over Type (17349 only) Washer Termination, used with: 17345 line (cable connecting) plug 17347 jam nut receptacle 17348 jam nut receptacle yelet Termination - used with: 17343 wall mount receptacle 17346 box mount receptacle 24 17349-( ) 17349-( ) 1.7500.180 6.000 1.938 1.891.980 28 17349-( ) 17349-( ) 2.0000.180 6.000 2.219 2.141.980 32 17349-( ) 17349-( ) 2.2500.209 6.000 2.469 2.391.980 36 17349-( ) 17349-( ) 2.5000.209 6.000 2.719 2.641.980 40 17349-( ) 17349-( ) 2.7500.209 6.000 2.969 2.891.980 ll dimensions for reference only. ote: rotective covers are supplied with all 85049 style cable sealing adapters. 60 954-888-1024
I-T-22992, QW solder contacts To ensure maximum corrosion protection, current carrying capacity and low millivolt drop, all -style solder contacts are treated with a heavy silver-plated finish. ontacts with gold plating may also be specified. O OTT* I/ OT TI IZ WI IZ OW WI IZ TT UT** in ocket 16 ong 16 16 18 20 22 13 10 7.5 5 in ocket 12 12 12 10 23 17 in ocket 8 8 8 10 46 33 in ocket 4 4 4 6 80 60 in ocket 0 0 0 1 2 150 125 100 * older Wells Unfilled ** ontact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. lease note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. ervice ating Table I OTT T VI TI ecommended Operating Voltage* at ea evel () ffective reepage istance om. Inst. 250 200 1/16 echanical pacing om. 700 500 1/8 1/16 1250 900 3/16 1/8 1750 1250 1/4 3/16 2450 1750 5/16 1/14 4200 3000 1 5/16 ominal istance ervice ating irspace reepage Table II TITU VOT TI** tandard ea evel onditions inimum lashover Voltage () Test Voltage () ressure ltitude 50,000 feet inimum lashover Voltage () Test Voltage () ressure ltitude 70,000 feet inimum lashover Voltage () Test Voltage () Inst. 1/32 1/16 1400 1000 550 400 325 260 1/16 1/8 2800 2000 800 600 450 360 1/8 3/16 3600 2800 900 675 500 400 3/16 1/4 4500 3500 1000 750 550 440 1/4 5/16 5700 4500 1100 825 600 480 5/16 1 8500 7000 1300 975 700 560 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. ot corrected for changes in density due to variations in temperature. ** o attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 954-888-1024 61
QW solderless (crimp) contacts To ensure maximum corrosion protection, current carrying capacity and low millivolt drop, our 16- and 12-socket contacts, which are built with copper alloys and silver-plated offer closed entry design. rimp contacts are available for all insert layouts arrangements and bear a ext3 proprietary number. ontacts with gold plating may also be specified. To place your order, please contact factory. I OTT* I/ OT TI IZ WI IZ OW WI IZ QUI WI T V TT UT** in ocket 16 ong 16 16 18 20 22* 74696-6 13 10 7.5 5 in ocket 12 12 12 10 23 17 in ocket 8 8 8 10* 74696-1 46 33 in ocket 4 4 4 6* 74696-2 80 60 in ocket 0 0 0 2* 74696-2 150 100 * When using wire adapter sleeve shown. ** ontact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. lease note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer s hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. ervice ating Table I OTT T VI TI ecommended Operating Voltage* at ea evel () ffective reepage istance om. Inst. 250 200 1/16 echanical pacing om. 700 500 1/8 1/16 1250 900 3/16 1/8 1750 1250 1/4 3/16 2450 1750 5/16 1/14 4200 3000 1 5/16 ominal istance ervice ating irspace reepage Table II TITU VOT TI** tandard ea evel onditions inimum lashover Voltage () Test Voltage () ressure ltitude 50,000 feet inimum lashover Voltage () Test Voltage () ressure ltitude 70,000 feet inimum lashover Voltage () Test Voltage () Inst. 1/32 1/16 1400 1000 550 400 325 260 1/16 1/8 2800 2000 800 600 450 360 1/8 3/16 3600 2800 900 675 500 400 3/16 1/4 4500 3500 1000 750 550 440 1/4 5/16 5700 4500 1100 825 600 480 5/16 1 8500 7000 1300 975 700 560 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. ot corrected for changes in density due to variations in temperature. ** o attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc.a 62 954-888-1024
QW application tools Installation instructions (-615) for ext3 QW eries onnectors are available upon request. Information about specialized application tools for crimping, inserting and removing crimp contacts used in these products are shown below. OTT II, ITIO & OV TOO II TOO OITIO/TUT OTT IZ OTT TY 22520/1-01 * 16 in & ocket 22520/1-01 * 12 in & ocket ** ** 8 in & ocket ** ** 4 in & ocket ** ** 0 in & ocket * Use aniels Turret T29-1 or stro Tool o. Turret 616266 ** or appropriate crimp tool and positioner refer to ico rimping Tool o. 954-888-1024 63
ext3 eavy uty ylindrical onnectors QW I ext3 QW eries onnectors are purposebuilt for compact, heavy-duty industrial use. These connectors are the choice for maximum performance in shipboard installations, as well as ground support power distribution where strength and reliability matters the most. If military specs are not needed, but reliability under the most sever conditions is, this versatile series is your economical choice. The connectors in this series are produced for: XTOIY VI high strength aluminum shells with lumilite 225* hard anodic finish and shock resistant resilient inserts. OTIO rugged double stub coupling threads, left hand accessory threads and simple single keyway mating. T both and custom insert patterns available for a large selection of multiconductor cables. full line of accessories is available for use with QW eries connectors, including cable sealing, clamp adapters, protective covers, flange gaskets, and banding clamps. or further information about ext3 QW eries connectors, request catalog 12-053 or contact your local sales office. *egistered trademark of luminum ompany of merica 64 954-888-1024
VY UTY YII I-T-5015, 3100 & 3400 954-888-1024 65
ext3 eavy uty ylindrical onnectors I-T-5015, 3400 ext3 offers a wide variety of 5015 power connectors. These connectors are ideal for use in highly ruggedized applications, where power/signal has to be transmitted in an environment of extremely low or high temperatures, with high vibration and shock also present. part from providing mechanical protection to the contacts, the connectors offer the advantage of being light weight and easy to handle, which facilitates ease of mating/unmating. OUI: luminium alloy to provide high mechanical strength while ensuring light weight. U II: tandard finish is olive drab chromate over cadmium, for corrosion resistance and use in extreme operating condition. IUTO: tandard insulator material is olychloroprene, which provides high degree of insulation resistance, dielectric strength, ability to withstand shock, impact and vibration. Options include ilicon, Viton, and a flame-retardant halogen-free compound which has properties of low smoke and non-toxicity. OTT: opper base alloy - silver (or gold) plated, available in a range of current ratings from 10 amps to 150 amps. These offer excellent conductivity under severe service conditions with minimum loss or discontinuity of current even in dynamic applications. oth solder and crimp terminations are available. arge array of over 100 insert arrangementsin 13 shell sizes for power, signal, and combinations of power and signal pin configurations are available for a variety of applications. Temperature: Operating temperature from -40-200. 66 954-888-1024
I-T-5015, 3400 ow to Order T U il / ommercial 1 2 3 4 5 6 34 00 14-3 W T34 00 14-3 W 1. umber 3400 Wall ount eceptacle 3401 able onnecting eceptacle 3402 ox ount eceptacle 3406 traight lug or commercial callout, replace with T 2. lass - igh Impact 3. aterial - tainless teel T- arris lloy with admium late eave lank for luminum lloy 4. hell ize and Insert rrangement ee page 30 5. ontact Type - in - ocket 6. lternate Insert otation W,X,Y, or Z one = ormal *lease contact your represntative for alternate platings 954-888-1024 67
I-T-5015, 3400 wall mount receptacle hell ize ±.031.,,,W 16*12 8,4,0 Thread Thread 8.875.594.120.150 2.031-1/2-28 U 1/2-28 U.083 10 1.000.719.120.150 2.031-5/8-24 U 5/8-24 U.083 10 1.000.719.120.150 2.031-5/8-24 U 5/8-24 U.083 12 1.094.812.120.150 2.125-3/4-20 U 3/4-20 U.083 12 1.094.812.120.150 2.031-3/4-20 U 3/4-20 U.083 14 1.188.906.120.150 2.125-7/8-20 U 7/8-20 U.083 14 1.188.906.120.150 2.031-7/8-20 U 7/8-20 U.083 16 1.281.969.120.150 2.125 2.500 1-20 U 1-20 U.083 16 1.281.969.120.150 2.031-1-20 U 1-20 U.083 18 1.375 1.062.120.177 2.125 2.500 1 1/8-16 U 1 1/8-18 U.125 20 1.500 1.156.120.177 2.125 2.500 1 3/16-18 U 1 1/4-18 U.125 22 1.625 1.250.120.177 2.125 2.500 1 5/16-18 U 1 3/8-18 U.125 24 1.750 1.375.147.177 2.125 2.500 1 7/16-18 U 1 1/2-18 U.125 28 2.000 1.562.147.177 2.125 2.500 1 3/4-18 U 1 3/4-18 U.125 32 2.250 1.750.173.209 2.125 2.500 2-18 U 2-18 U.125 36 2.500 1.938.173.209 2.125 2.500 2 1/4-16 U 2 1/4-16 U.125 40 3.000 2.188.173.209 2.125 2.500 2 3/4-16 U 2 3/4-16 U.125 44 3.250 2.375.173.209 2.125 2.500 3-16 U 3-16 U.125 68 954-888-1024
I-T-5015, 3401 cable connecting recepticle hell ize ±.031. ax ontact ize oupling Threads ccessory Thread +.031 ax in 2 2-0.000 ±.015 16 & 12 8,4,0 8.729.504 0.496 1/2-20 U 1/2-20 U.562.830 2.031-10.854.629 0.621 5/8-24 U 5/8-24 U.562.830 2.031-10.854.629 0.621 5/8-24 U 5/8-24 U.562.830 2.031-12.974.754 0.746 3/4-20 U 3/4-20 U.562.830 2.031-12.974.754 0.746 3/4-20 U 3/4-20 U.750.830 2.125-14 1.099.879.871 7/8-20 U 7/8-20 U.562.830 2.031-14 1.099.879.871 7/8-20 U 7/8-20 U.750.830 2.125-16 1.224 1.005 0.996 1-20 U 1-20 U.562.830 2.031-16 1.224 1.005 0.996 1-20 U 1-20 U.750.830 2.125 2.500 18 1.349 1.131 1.121 1 1/8-18 U 1 1/16-18 U.750.125 2.125 2.500 20 1.474 1.256 1.246 1 1/4-18 U 1 3/16-18 U.750.125 2.125 2.500 22 1.599 1.381 1.371 1 3/8-18 U 1 5/16-18 U.750.125 2.125 2.500 24 1.715 1.506 1.496 1 1/2-18 U 1 7/16-18 U.750.125 2.125 2.500 28 1.974 1.756 1.746 1 3/4-18 U 1 3/4-18 U.750.125 2.125 2.500 32 2.224 2.007 1.996 2-18 U 2-18 U.875.125 2.125 2.500 36 2.474 2.257 2.246 2 1/4-16 U 2 1/4-16 U.875.125 2.125 2.500 40 2.724 2.511 2.496 2 1/2-16 U 2 1/2-16 U.875.125 2.125 2.500 44 2.974 2.746 2.761 2 3/4-16 U 2 3/4-16 U.875.125 2.125 2.500 954-888-1024 69
I-T-5015, 3402 box mount receptacle dc hell ize ize 16&12 ontacts ize 8,4,0 ontacts ±.016 ±.015 Thread 8.130/.115 1.662 -.500.578/.562.083 1/2-28 U.875.594 10.130/.115 1.662 -.625.578/.562.083 5/8-24 U 1.000.719 10.130/.115 1.662 -.625.578/.562.083 5/8-24 U 1.000.719 12.130/.115 1.662 -.750.765/.562.083 3/4-20 U 1.094.812 12.130/.115 1.662 -.750.577/.562.083 3/4-20 U 1.094.812 14.130/.115 1.662.875.765/.750.083 7/8-20 U 1.188.906 14.130/.115 1.662 -.875.577/.562.083 7/8-20 U 1.188.906 16.130/.115 1.662 1.937 1.000.765/.750.083 1-20 U 1.281.969 16.130/.115 1.662-1.000.577/.562.083 1-20 U 1.281.969 18.130/.115 1.662 1.937 1.062.765/.750.125 1-1/8-18 U 1.375 1.062 20.130/.115 1.662 1.937 1.187.765/.750.125 1-1/4-18 U 1.500 1.156 22.130/.115 1.662 1.937 1.312.765/.750.125 1-3/8-18 U 1.625 1.250 24.130/.115 1.662 1.937 1.437.827/.812.125 1-1/2-18 U 1.750 1.375 28.130/.115 1.662 1.937 1.750.827/.812.125 1-3/4-18 U 2.000 1.562 32.130/.115 1.662 1.937 2.000.988/.875.125 2-18 U 2.250 1.750 36.130/.115 1.662 1.937 2.250.988/.875.125 2-1/4-16 U 2.750 1.938 40.130/.115 1.662 1.937 2.750.988/.875.125 2-3/416 U 3.000 2.188 44.130/.115 1.662 1.937 3.000.988/.875.125 3-16 U 3.250 2.375 ±.31 T.. 70 954-888-1024
I-T-5015, 3406 straight plug 4 4 3 3 2 2 1 Q Q TIO - 2 : 1 TIO - 2 : 1 hell ize ax ontact ize 16&12 8,4,0 oupling Threads ccessory Thread Q ax. 8 2.031-1/2-28 U 1/2-20 U.844 10 2.031-5/8-24 U 5/8-24 U.969 10 2.031-5/8-24 U 5/8-24 U.969 12 2.031-3/4-20 U 3/4-20 U 1.062 12 2.125-3/4-20 U 3/4-20 U 1.062 14 2.031-7/8-20 U 7/8-20 U 1.156 14 2.125-7/8-20 U 7/8-20 U 1.156 16 2.031-1-20 U 1-20 U 1.250 16 2.125 2.500 1-20 U 1-20 U 1.250 18 2.125 2.500 1 1/8-18 U 1 1/16-18 U 1.344 20 2.125 2.500 1 1/4-18 U 1 3/16-18 U 1.469 22 2.125 2.500 1 3/8-18 U 1 5/16-18 U 1.594 24 2.125 2.500 1 1/2-18 U 1 3/4-18 U 1.719 W Q mitriy 7/8/2016 W mitriy 7/8/2016 TIT 4 4 28 2.125 2.500 1 3/4-18 U 1 3/4-18 U 1.969 Q 32 2.125 2.500 2-18 U 2-18 U 2.219 36 2.125 2.500 2 1/4-16 3U 2 1/4-16 U 2.469 40 2.125 2.500 2 1/2-16 U 2 1/2-16 U 2.719 3 OV 2 OV 2 TIT IZ IZ W O U3406 W U 1 954-888-1024 71
ext3 eavy uty ylindrical onnectors I-T-5015, 3100 ext3 offers a wide variety of 5015 power connectors. These connectors are ideal for use in highly ruggedized applications, where power/signal has to be transmitted in an environment of extremely low or high temperatures, with high vibration and shock also present. part from providing mechanical protection to the contacts, the connectors offer the advantage of being light weight and easy to handle, which facilitates ease of mating/unmating. OUI: luminium alloy to provide high mechanical strength while ensuring light weight. U II: tandard finish is olive drab chromate over cadmium, for corrosion resistance and use in extreme operating condition. O finishes available. right ickel lated, lectroless ickel, Zinc lloy IUTO: tandard insulator material is olychloroprene, which provides high degree of insulation resistance, dielectric strength, ability to withstand shock, impact and vibration. Options include ilicon, Viton, and a flame-retardant halogen-free compound which has properties of low smoke and non-toxicity. OTT: opper base alloy - silver (or gold) plated, available in a range of current ratings from 10 amps to 150 amps. These offer excellent conductivity under severe service conditions with minimum loss or discontinuity of current even in dynamic applications. oth solder and crimp terminations are available. arge array of over 100 insert arrangementsin 13 shell sizes for power, signal, and combinations of power and signal pin configurations are available for a variety of applications. Temperature: Operating temperature from -40-125. 72 954-888-1024