Owner s Manual & Safety Instructions

Similar documents
Owner s Manual & Safety Instructions

6 OFF ROAD LIGHT BAR

Swing Arm Magnifying Lamp

Owner s Manual & Safety Instructions

p.t.o. Slip clutch Read this material before using this product. Failure to do so can result in serious injury. Save this manual.

CAMBELT TENSION GAUGE

Owner s Manual & Safety Instructions

1250 LB. CAPACITY MECHANICAL WHEEL DOLLY

Table of Contents. Safety... 2 Specifications... 3 Setup Parts List and Diagram Warranty Operation Maintenance

will result in death or serious injury. could result in death or serious injury. Indicates a hazardous situation which, if not avoided,

Installation Precautions. Use Precautions. Specifications

Owner s Manual & Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

Component Size Weight Capacity

Owner s Manual & Safety Instructions

Automatic Emergency Light

360 Watt Charge Controller

DISC BRAKE CALIPER TOOL SET

25 GALLON PORTABLE OIL LIFT

Manual Operated Floor Jack

IMPORTANT SAFETY INFORMATION

PUSH BUTTON KEY CABINET

SIDE-WIND, A-FRAME TRAILER JACK. Model Due to continuing improvements, actual product may differ slightly from the product described herein.

IMPORTANT SAFETY INFORMATION

Manual Operated Floor Jack

SUBMERSIBLE PUMP. Model ASSEMBLY AND OPERATING INSTRUCTIONS

SPECIFICATIONS GENERAL SAFETY RULES PERSONAL SAFETY. Save This Manual TOOL USE AND CARE WORK AREA

4 in 1 solar bird bath

rechargeable umbrella light

For technical questions and replacement parts, please call

1200W Paint DRYING Lamp

RECHARGEABLE 24 LED WORK LIGHT

Digital Auto Multi-Tester

IMPORTANT SAFETY INFORMATION

Welding Clips. Model Due to continuing improvements, actual product may differ slightly from the product described herein.

Owner s Manual & Safety Instructions

SUBMERSIBLE MINI-PUMP

SUBMERSIBLE POND PUMP

Owner s Manual & Safety Instructions

Specifications. Important Safety Information

2,000 LB. REMOTE CONTROL UTILITY ELECTRIC WINCH

MINI AIR ANGLE DIE GRINDER

TRAILER SPRAYER 25 GALLON WITH TRAILER

POLISHER KIT Model 95030

Owner s Manual & Safety Instructions

ANGLE DIE GRINDER KIT

flexible infrared thermometer

1000 Lb. Motorcycle Lift

Owner s Manual & Safety Instructions

Solar mosquito killer

BATTERY CHARGER WITH LCD DISPLAY

MOTORCYCLE LIFT AIR OPERATED - 1,200 LB. CAPACITY. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:

MOTORCYCLE LIFT RAMP

Owner s Manual & Safety Instructions

1/2 Ton - 2 Stage Transmission Jack

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions

3-1/2 Digit LCD Multimeter with Tachometer Kit

AIR COMPRESSOR 2 HP - 8 GALLON

ELECTRIC PLATFORM SCALE

VAc A. Rc Ah. Table of contents. OpERATION MAINTENANcE. Safety... 2 Specifications... 6 Operation Maintenance Warranty...

Rio color changing solar light

5.5 HP GAS POWERED auger

CORDLESS POWER SHEAR 19.2 volts 99735

4 color Solar light. Model Due to continuing improvements, actual product may differ slightly from the product described herein.

Owner s Manual & Safety Instructions

EIGHT GALLON PSI AIR COMPRESSOR

2 PIECE SOLAR LIGHT SET 93886

Owner s Manual & Safety Instructions

4.8 VOLT RECHARGEABLE CORDLESS SCREWDRIVER

19.2V 1/2 Cordless impact

2 line price marking gun

TURTLE SOLAR LIGHT 94412

CHIPPER/SHREDDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS

SUBMERSIBLE DIRTY WATER PUMP

STEEL SIDE PANEL KIT. Model (FOR USE WITH MODEL FOLDABLE UTILITY TRAILER)

MINIATURE ALUMINUM JACK STANDS (1 PAIR) Model 90892

18V 3/8 CORDLESS. Read this material before using this product. Failure to do so can result in serious injury.

4 AIR ANGLE GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS. Visit our website at:

POWER INVERTER 700 WATT / 1800 WATT PEAK

Model Due to continuing improvements, actual product may differ slightly from the product described herein.

4 in 1 POWER STATION Model: 7226

Owner s Manual & Safety Instructions

WOODEN SIDE PANEL KIT

Road Sweeper. Model 96456

Owner s Manual & Safety Instructions

3/8 CORDLESS DRILL 18 VOLT - KEYLESS CHUCK

19.2V cordless autofeed screwdriver 99683

ELECTRIC LONG SHAFT DIE GRINDER 44141

14-Piece Master Ball Joint Adapter Set

5,500 LB. CAPACITY 12 VOLT WINCH WITH ROLLER FAIRLEAD

12V Lithium-Ion. Model Set up and Operating Instructions. Visit our website at:

ELECTRIC PORTABLE PIPE THREADER. Model 95955

WINDSHIELD REMOVAL KIT

19.2 VOLT, 4-1/2 Angle

VERTICAL FLOAT SUMP PUMP Model Model Model

4 TIER STOCKER SERVICE CART

ELECTRIC PORTABLE PIPE THREADER. Model ASSEMBLY AND OPERATING INSTRUCTIONS

Swing Back Trailer Jack

WHEEL KIT FOR 13 HP GENERATOR

Transcription:

Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. SOLAR MOLE CHASER 18b Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright 2006 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. 94661 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL.

Table of contents Safety...2 Specifications...4 Setup...4 Operation...6 Maintenance...7 Warranty...8 SAFETy SETUp OpERATION MAINTENANcE Important Safety Information personal Safety 1. Dress Properly - Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair. 2. Wear ANSI-approved safety goggles during setup. 3. Live moles, gophers and other rodents can be dangerous to approach, and may carry diseases. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. 4. Do not Overreach - Keep proper footing and balance at all times. 5. Stay Alert - Watch what you are doing. Use common sense. Do not operate appliance when you are tired. 6. People with pacemakers should consult their physician(s) before use. Electromagnetic fields in close proximity to heart pacemaker could cause pacemaker interference or pacemaker failure. Page 2 For technical questions, please call 1-888-866-5797. Item 94661

Use precautions 1. Bring unit indoors during extreme weather conditions like hail, ice, snow, or flooding. Although unit is weatherproof, avoid direct exposure to sprinkler systems. 2. For hard earth locations, dig a small hole in the ground before installing the solar mole chaser. 3. Do not use a hammer or mallet or excessive force to insert the solar mole chaser. Doing so may damage the unit. 4. This product is not a toy. Do not allow children to play with or near this item. 5. Use as intended only. 6. Inspect before every use; do not use if parts are loose or damaged. 7. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. SAFETy MAINTENANcE OpERATION SETUp Item 94661 For technical questions, please call 1-888-866-5797. Page 3

Specifications SAFETy SETUp OpERATION MAINTENANcE Frequency Battery Rating Battery Type Pulse Interval Setup - Before Use: 400-1000Hz 1.2V / 600mAh AA NiCd Rechargeable 30 sec. Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO prevent INJURy FROM AccIDENTAL OpERATION: Make sure that the power Button is in the off-position and remove the Battery pack before assembling or making any adjustments to the Mole chaser. Set Up 1. Make sure that the Power Button is in the off-position, then unthread the 6 screws on the underside of the head, remove the solar cell cover, and install a AA-sized NiCd rechargeable battery. Reattach the cover and tighten the screws. 2. Press the ON/OFF button beneath the head. The pulse will sound, indicating the product is in proper working condition. Charge the product for at least one full sunny day before its first operation. 3. Carefully insert the Chaser spike into the lawn. Press down firmly until the base of the head is approximately one inch from ground level. Page 4 For technical questions, please call 1-888-866-5797. Item 94661

Functions Solar cell cover Rechargeable Battery SAFETy Screw Spike power Button MAINTENANcE OpERATION SETUp Item 94661 For technical questions, please call 1-888-866-5797. Page 5

Operating Instructions SAFETy SETUp OpERATION MAINTENANcE Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. General Operating Instructions 1. The Solar Mole Chaser repels burrowing pests (such as moles, gophers, and other rodents) by emitting a piercing sonic pulse. 2. For best results, install 2 units approximately 60 ft. apart in the highest risk area. 3. To prevent accidents, turn off the Mole Chaser and remove its Battery after use. Clean, then store the Mole Chaser indoors out of children s reach. Page 6 For technical questions, please call 1-888-866-5797. Item 94661

Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. TO prevent INJURy FROM AccIDENTAL OpERATION: Make sure that the power Button is in the off-position and remove its Battery before performing any inspection, maintenance, or cleaning procedures. TO prevent INJURy FROM UNIT FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. cleaning, Maintenance, and Lubrication 1. BEFORE EAcH USE, inspect the general condition of the Mole Chaser. Check for: leaking, swollen, or cracked battery, loose hardware, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation. 2. AFTER USE, clean external surfaces of the appliance with clean, moist cloth. 3. Clean the solar cell cover periodically with a damp cloth to ensure maximum sun exposure. 4. The built-in battery may need to be replaced once a year. Unthread the 6 screws on the underside of the head, remove the solar cell cover, and replace the old battery with a AA-sized NiCd rechargeable battery. Reattach the cover and tighten the screws. 5. NiCd BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. Do not short, incinerate or open battery. SAFETy MAINTENANcE OpERATION SETUp Item 94661 For technical questions, please call 1-888-866-5797. Page 7

Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. po Box 6009 camarillo, ca 93011 1-888-866-5797