K1514 K5534 Product Brief The N-Series is designed for processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs, and other minimally corrosive applications. Features/Benefits Reviewed and approved by ABSA for use in Alberta, Canada. Awarded Canadian registration numbers: 0C13831.2, 0C15335.2. Suitable for air, water, oil, natural gas, and other fluids with low-level corrosiveness. Blowout-proof stem design to prevent accidental back-out and blowout issues. Mirror finish on stems for extended packing life. Globe, Y, or angle patterns available on hard seat versions. Straight pattern on soft seat versions. Tested and qualified: Cycle tested 500 times under full Cold Working Pressure (CWP) load; seat tested at 110% of CWP; shell tested at 200% of CWP. CRN needle valves meet the following standards: ASME B31.1 Power Piping ASME B31.3 Process Piping
K1514 Dimensions in Inches (mm) 0.45 (11.3) 4.58 (116.3) 3.81 (96.8) 1.50 3.25 (82.6) 1.50 Approximate valve weight: 2.3 lb (1.04 kg). Approximate number of turns to fully open/close valve: 12. Reviewed and approved by TSSA for use in Ontario, Canada. Awarded Canadian registration number: 0C19783.5 K1534 Dimensions in Inches (mm) 0.45 (11.3) 4.58 (116.3) 3.81 (96.8) 1.50 1.50 Male NPT 3.25 (82.6) Approximate valve weight: 2.0 lb (0.91 kg). Approximate number of turns to fully open/close valve: 12. 2
K1552 Dimensions in Inches (mm) 0.32 (8.1) 3.66 (93.0) Ø1.06 (27.0) 4.77 (121.2) 1.69 (43.0) 1.33 (33.8) 1.50 1/4 Inch 1/4 Inch Approximate valve weight: 1.7 lb (0.77 kg). Approximate number of turns to fully open/close valve: 7-3/4. K1572 Dimensions in Inches (mm) 0.36 (9.1) 3.64 (92.5) 1/4 Inch 4.76 (120.9) 1.33 (33.8) 2.06 (52.3) 1.50 1/4 Inch Male NPT Approximate valve weight: 1.5 lb (0.68 kg). Approximate number of turns to fully open/close valve: 9. 3
K5514 Dimensions in Inches (mm) 0.32 (8.1) 3.40 (86.4) Ø0.188 (4.8) 3.34 (84.8) 2.75 (69.9) Approximate valve weight: 1.1 lb (0.50 kg). Approximate number of turns to fully open/close valve: 4-3/4. K5534 Dimensions in Inches (mm) 0.32 (8.1) 3.90 (99.1) 3.34 (84.8) Male NPT 2.75 (69.9) Ø0.188 (4.8) Approximate valve weight: 1.0 lb (0.45 kg). Approximate number of turns to fully open/close valve: 4-3/4. 4
200K Dimensions in Inches (mm) 3.75 (95.3) 0.22 (5.6) 3.52 (89.4) Ø1.90 (48.3) 5.36 (136.1) Male NPT 2.38 (60.5) 1.85 (47.0) 1.43 (36.3) Approximate valve weight: 3.6 lb (1.63 kg). Approximate number of turns to fully open/close valve: 4-1/2. 5
110K Dimensions in Inches (mm) 3.75 (95.3) 5.41 (137.4) 0.22 (5.6) 1.44 (36.6) 2.23 (56.6) 4.03 (102.4) Male NPT 4.38 (111.3) Approximate valve weight: 3.0 lb (1.36 kg). Approximate number of turns to fully open/close valve: 4-1/2. 6
Standard Materials Model Body Bonnet Stem Hard Seat Carbon Steel Valves with Adjustable Packing K1514 410T Stainless Steel K1534 K1552 K1572 410T Stainless Steel 410T Stainless Steel 410T Stainless Steel Hard Seat Carbon Steel Valves with Adjustable Packing 200K 316 Stainless Steel 316 Stainless Steel 110K 316 Stainless Steel 316 Stainless Steel Soft Seat Carbon Steel Valves K5514 316 Stainless Steel K5534 316 Stainless Steel Pressure and Temperature Ratings Model Packing Seat Material Hard Seat Carbon Steel Valves with Adjustable Packing Maximum Operating Pressure K1514 PTFE Integral 10,000 psi 500 F K1534 PTFE Integral 10,000 psi 500 F K1552 PTFE Integral 10,000 psi 500 F K1572 PTFE Integral 10,000 psi 500 F Hard Seat Carbon Steel Valves with Adjustable Packing 200K PTFE Integral 10,000 psi 500 F 110K PTFE Integral 10,000 psi 500 F Soft Seat Carbon Steel Valves K5514 Viton O-Ring with Backup Ring Delrin 6,000 psi 200 F K5534 Viton O-Ring with Backup Ring Delrin 6,000 psi 200 F Maximum Operating Temperature 7
Valve Descriptions and Properties Model K1514 K1534 K1552 K1572 200K 110K K5514 K5534 Valve Descriptions and Properties 1/2" NPT, Female x Female Globe Pattern, Carbon Steel, Hard Seat Cv = 1.07 1/2" NPT, Male x Female Globe Pattern, Carbon Steel, Hard Seat Cv = 0.98 1/4" NPT, Female x Female Angle Pattern, Carbon Steel, Hard Seat Cv = 0.42 1/4" NPT, Male x Female Angle Pattern, Carbon Steel, Hard Seat Cv = 0.42 1/2" NPT, Male x Female Angle Pattern, Stainless Steel, Hard Seat Cv = 0.34 1/2" NPT, Male x Female Y Pattern, Stainless Steel, Hard Seat Cv = 0.34 1/2" NPT, Female x Female Straight Pattern, Carbon Steel, Soft Seat Cv = 0.7 1/2" NPT, Male x Female Straight Pattern, Carbon Steel, Soft Seat Cv = 0.7 All product names referenced herein are trademarks of their respective companies. Kerotest Manufacturing Corp. 5500 Second Avenue Pittsburgh, PA 15207 412.521.7688 Fax: 412.521.5990 www.kerotest.com Sales@Kerotest.com NV-CRN 1M 1/18