S & ENCLOSURES Floor Standing Cabinets A4 Series 18RU, 27RU & 42RU PSS 262 Wall Mounted Cabinets WM Series 6RU, 12RU & 18RU PSS 263 ZH Series 6RU, 12RU & 18RU PSS 263 Cabinet ACCESSORIES Wall & Floor Mounted PSS 264 EQUIPMENT ENCLOSURES Equipment Enclosures NESS 265-266 Equipment Enclosures POWERBOX 265 Equipment Enclosures ALTRONICS 266 EXTERNAL EQUIPMENT ENCLOSURES CB Box RADUM 267 261
ALARM S EQUIPMENT & ENCLOSURES Stand FLOOR STANDING Alone: one S channel A4 SERIES FLOOR STANDING 18RU, 27RU & 42RU Rack Mounted Cabinets Toughened glass front door alleviates static electricity and interference Removable cable entry plates on top & bottom of cabinet Fully assembled with rigid welded internal frame Vented rear door with lock Front/rear vertical mounting rails can be re-positioned Removable side panels for ease of access Heavy duty castors fitted with levelling feet (800kg load) Earth continuity leads fitted to every panel Pre-fitted fixed metal shelves included Spare cage nuts included Complies with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, ETSI standard. IP20 Powder coated Accessories Fans, power distribution and patch panels are available (see page 264) MODEL CAPACITY W H D KG A46618 600 54 A46818 18RU 600 988 800 63 A46018 1000 72 A46672 600 73 A46827 27RU 600 1388 800 88 A46027 1000 99 A46642 600 96 A46842 600 800 109 A46042 42RU 2055 1000 118 A48842D 800 105 800 A48042D 1000 110 A46618 Ex GST Inc GST 18RU 600mm WIDE 600MM DEEP FLOOR STANDING A46818 Ex GST Inc GST 18RU 600mm WIDE 800mm DEEP FLOOR STANDING A46018 Ex GST Inc GST 18RU 600mm WIDE 1000mm DEEP FLOOR STANDING A46627 Ex GST Inc GST 27RU 600mm WIDE 600MM DEEP FLOOR STANDING A46827 Ex GST Inc GST 27RU 600mm WIDE 800MM DEEP FLOOR STANDING A46027 Ex GST Inc GST 27RU 600mm WIDE 1000MM DEEP FLOOR STANDING A46642 Ex GST Inc GST 42RU 600mm WIDE 600MM DEEP FLOOR STANDING A46842 Ex GST Inc GST 42RU 600mm WIDE 800MM DEEP FLOOR STANDING A46042 Ex GST Inc GST 42RU 600mm WIDE 1000MM DEEP FLOOR STANDING A48842D Ex GST Inc GST 42RU 800mm WIDE 800MM DEEP FLOOR STANDING A48042D Ex GST Inc GST 42RU 800mm WIDE 1000MM DEEP FLOOR STANDING SEE PAGE 264 FOR the range of ACCESSORIES 262 All prices exclude delivery charges. Prices and specifications are subject to change without notice.
S & ENCLOSURES WALL MOUNTED S WM SERIES WALL MOUNTED 6RU, 12RU & 18RU Rack Mounted Cabinets Lockable tempered glass front door Sturdy welded internal frame structure Pre-fitted fixed metal shelves included Removable side panels Multiple earthing points with leads fitted Spare cage nuts included Complies with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GB/T3047.2-92 standard Loading Capacity 60Kg IP20 Powder coated MODEL CAPACITY W H D KG WM6406 6RU 368 22 WM6412 12RU 600 635 450 28 WM6418 18RU 901 35 WM6406 Ex GST Inc GST 6RU STANDARD WALL MOUNT WM6412 Ex GST Inc GST 12RU STANDARD WALL MOUNT WM6418 Ex GST Inc GST 18RU STANDARD WALL MOUNT ZH SERIES DOUBLE SECTION WALL MOUNTED 6RU, 12RU & 18RU Rack Mounted Cabinets Lockable tempered glass front door 10mm lockable rear swing section Sturdy welded internal frame structure Pre-fitted fixed metal shelves included Removable side panels Multiple earthing points with leads fitted Spare cage nuts included Complies with ANSI/EIA RS-310-D, DIN41497 part 1, IEC297-2, DIN41494 part 7, GB/T3047.2-92 standard Loading Capacity 60Kg IP20 Powder coated MODEL CAPACITY W H D KG ZH6606 6RU 368 25 ZH6612 12RU 600 635 600 36 ZH6618 18RU 901 48 ZH6606 Ex GST Inc GST 6RU DOUBLE SECTION WALL MOUNT ZH6612 Ex GST Inc GST 12RU DOUBLE SECTION WALL MOUNT ZH6618 Ex GST Inc GST 18RU DOUBLE SECTION WALL MOUNT 263
S & ENCLOSURES ACCESSORIES Accessories for cabinets 18RU, 27RU & 42RU Rack Mounted Cabinet Accessories Standard recommended operational accessories for cabinets are fans, Patch panels and PDU's (power distribution units) Full range or cabinet accessories are available including fixed and sliding shelves, cable management and additional sets of cage nuts FANS PATCH PANELS POWER DISTRIBUTION UNITS CAT5E/24 Ex GST Inc GST UTP Cat.5e Patch Panel,24 Port,LSA IDC, With Back Bar CAT6/24 Ex GST Inc GST UTP Cat.6 Patch Panel, 24 Port, LSA IDC, With Back Bar SA5202 Ex GST Inc GST Bag of cage nuts and bolts (20 sets included) (for all SA0245 Ex GST Inc GST Fixed Shelf (for 450mm depth wall mount SA0260 Ex GST Inc GST Fixed Shelf with mounting ear (for 600mm depth A4 SA0280 Ex GST Inc GST Fixed Shelf with mounting ear (for 800mm depth A4 SA0296 Ex GST Inc GST Fixed Shelf with mounting ear (for 1000mm depth A4 SA0660 Ex GST Inc GST Sliding shelf with mounting ear (for 600mm depth A4 SA0680 Ex GST Inc GST Sliding shelf with mounting ear (for 800mm depth A4 SA0696 Ex GST Inc GST Sliding shelf with mounting ear (for 1000mm depth A4 BRK2U Ex GST Inc GST 2RU WALL MOUNT BRACKET BRK3U Ex GST Inc GST 3RU WALL MOUNT BRACKET) BRK4U Ex GST Inc GST 4RU WALL MOUNT BRACKET SA9859 Ex GST Inc GST 900mm FIXED CHIMNEY FOR A4 RACKS SA4903 Ex GST Inc GST 1RU Digital Temperature Unit (for all the SA0806 Ex GST Inc GST 6 outlets PDU, w/o switch, with 3m lead (for all SA0815 Ex GST Inc GST 15 outlets PDU, w/o switch, with 3m lead (for 22RU or above SA1701 Ex GST Inc GST 1RU Cable Management with cap (for all SA1702 Ex GST Inc GST 2RU Cable Management with cap (for all SA4618 Ex GST Inc GST 18RU cable management (for 18RU A4 Cabinets) SA4627 Ex GST Inc GST 27RU cable management (for 27RU A4 Cabinets) SA4647 Ex GST Inc GST 47RU cable management (for 47RU A4 Cabinets) SA2904 Ex GST Inc GST 1RU fan unit with 4 fans (for all SA3103 Ex GST Inc GST 100 Fan Unit with 4 fans (for 1000mm depth A4 SA3163 Ex GST Inc GST 60 Fan Unit with 2 fans (for 600mm depth A4 SA3183 Ex GST Inc GST 80 Fan Unit with 4 fans (for 800mm depth A4 SA3322 Ex GST Inc GST 2 x Cooling Fan with plug (for all Wall Mount Cabinets) SA2452 Ex GST Inc GST 2RU,15 - Cantilever Shelf-III (for all A4 Cabinets) 264 All prices exclude delivery charges. Prices and specifications are subject to change without notice.
S & ENCLOSURES EQUIPMENT ENCLOSURES 101-008 NESS X Series EB04 Equipment Box Equipment box with removable lid and tamper protection. Suitable for housing power supplies or PCB access components. Dimensions (mm): 235 (W) x 300 (H) x 90 (D) 101-271FD NESS Flush Mount Door for 14 inch Metal Housing Flush mounting is ideal for hollow stud walls. Can be adjusted for varying wall finish thickness and this locking, removable, hinged door extends beyond the box edges approximately 14.73mm Easily conceals uneven cutouts of the wallboard edges. (Requires a 101-500.) The minimum rough opening is: 361.95mm (W) x 361.95mm (H) x 88.90mm (D) 101-008 Ex GST Inc GST Ness X Series EB04 Equipment Box 101-271FD Ex GST Inc GST Ness Flush Mount Door for 14 inch metal housing 101-500 NESS SWB14 Structured Wiring Housing 14 Inch Featuring hole-slot-hole mounting system to accommodate M1 controllers, shelves, brackets, wire modules, and third party equipment. Ample space for a controller, backup battery and accessory boards. Surface mounted or flush mounted in hollow walls with studs on 400mm centers. Knockouts for 13/19/32mm conduits & 50mm electrical box heavy duty steel, powder coated white & lockable lid with cam lock Dimensions (mm): 362 (W) x 362 (H) x 89 (D) 101-501 NESS SWB28 Structured Wiring Housing 28 Inch Featuring hole-slot-hole mounting system to accommodate M1 controllers, shelves, brackets, wire modules, and third party equipment Ample space for a controller, backup battery and several accessory boards. Knockouts for 13/19/32mm conduits & 50mm electrical box Heavy duty steel, powdercoated white & lockable lid with cam lock Housing can be surface mounted or flush mounted in hollow walls with studs on 400mm centers. Dimensions (mm): 362(W) x 710(H) x 115(D) 101-500 Ex GST Inc GST Ness SWB14 Structured Wiring Housing 14 Inch 101-501 Ex GST Inc GST Ness SWB28 Structured Wiring Housing 28 Inch 101-272KB Ness Replacement Camlock and Keys Replacement Cam lock and keys for 14" (101-500) housing and 28" (101-508) housing. PBBS-WMB Powerbox Equipment Enclosure Cabinet accept PBBS, PB256 and PB251 series The security enclosure is a wall mounted, vented cabinet with two flexible GPO cutouts. The Enclosure includes hardware, mounting kit, tamper switch and battery cable harness. Cabinet accepts batteries ranging from 7AH to 17AH Dimensions (mm): 360 (W) 370 (H) 105 (D) 101-272KB Ex GST Inc GST Ness Replacement Camlock and Keys PBBS-WMB Ex GST Inc GST POWER BOX ENCLOSURE 265
S & ENCLOSURES EQUIPMENT ENCLOSURES 101-290 NESS PB1 Project Box Stylish white project box Suitable for housing PCB access components. Dimensions (mm): 165 (W) x 109 (H) x 50 (D) H205 & H0201 Jiffy Box ABS ABS Black project box Suitable for housing PCB access components Allows PCB's to be installed vertically, or snapped in horizontally without the use of PCB stand-offs H0205 Dimensions (mm): 83 (W) x 54 (H) x 30 (D) H0201 Dimensions (mm): 158 (W) x 95 (H) x 53 (D) H0205 Ex GST Inc GST Jiffy Box BLACK ABS 101-290 Ex GST Inc GST Ness PB1 Equipment Box H0201 Ex GST Inc GST Jiffy Box BLACK ABS H0306 & H0310 Ritec ABS Enclosure Supplied with neoprene lid sealing gasket Supplied with a solid light grey lid PCB mounting points are moulded into the enclosure base H0306 Dimensions (mm): 165 (W) x 85 (H) x 55 (D) H0310 Dimensions (mm): 186 (W) x 146 (H) x 75 (D) H0330 & H0332A Ritec ABS Enclosure Supplied with neoprene lid sealing gasket Supplied with a clear lid PCB mounting points are moulded into the enclosure base H0330 Dimensions (mm): 186 (W) x 146 (H) x 75 (D H0332A Dimensions (mm): 220 (W) x 160 (H) x 55 (D) H0306 Ex GST Inc GST Ritec ABS Enclosure SOLID LID H0310 Ex GST Inc GST Ritec ABS Enclosure SOLID LID H0330 Ex GST Inc GST Ritec ABS Enclosure CLEAR LID H0332A Ex GST Inc GST Ritec ABS Enclosure CLEAR LID 266 All prices exclude delivery charges. Prices and specifications are subject to change without notice.
S & ENCLOSURES EXTERNAL EQUIPMENT ENCLOSURES RADUM EXTERNALLY RATED EQUIPMENT BOXES CB Equipment Boxes Multi-folded periphery of the enclosure to avoid water and sundries entering into the inners. Cold rolled steel welded frame with very strong structure. All-round polyurethane gasket inside door. Moulded door border with exquisite image and strong intensity. Smart design with door can be opened from left or right. Adjustable mounting panel M8 each pole is mounted on the body, door and the mounting panel. Complies with IEC60529, EN60529/10.91 and GB4208-93 Standard Loading Capacity Static loading: 60Kg Small size Box with IP66 ( Width is less than 400mm) Big size box with IP55 ( Width is over 400mm) Main Material SPCC Cold rolled steel Thickness of Steel Mounting panel: 2.0mm Others: 1.5mm Body & Door: Degreasing, pickling, phosphoric, electrophoretic dip-coated print, static powdered with textured stove enamel RAL7032 Mounting Plate ( SPCC cold steel) Degreasing, pickling, phosphoric, electrophoretic dip-coated printed, static powdered with flat coating RAL2000 3 Sizes Available CABTCB1033: SMALL CABTCB1034: MEDIUM CABTCB1038: LARGE MODEL W H D CABTCB1033 Ex GST Inc GST RADUM CB Series EXTERNAL Equipment Box CABTCB1034 Ex GST Inc GST RADUM CB Series EXTERNAL Equipment Box CABTCB1033 300 300 CABTCB1034 400 CABTCB1038 380 600 210 CABTCB1038 Ex GST Inc GST RADUM CB Series EXTERNAL Equipment Box 267