GLOBAL WARNING WWW.HAZTEC.UK warning, worklights message signs & ancillaries BROCHURE 1 JUNE 2018 lightbars sirens, speakers & controls BROCHURE 2 BROCHURE 3 warning beacons BROCHURE 4
CONTENTS Warning lights: - Slimline surface mount warning lights - Compact warning lights - Directional warning lights - Wide angle directional warning lights - Economy surface mount warning lights - Large surface mount warning lights - Slim warning lights - Slim vertical warning lights - Number plate mounted lights - Wind/rear screen mounted lights Personal safety lights Hideaway units Multi-module warning and Arrowbars 1-15 1-2 3-4 5-6 7 8 9 10 11 12 13-15 15 16 17-18 InfoSign LED message signs 19-20 Scene lights 21-23 Worklights: 24-27 - High power worklights 24 - General worklights 25-26 - Dual mount worklights 27 Linear bar lights 27 Motorised searchlights 28-29 Interior lights 30 Cigar plug leads and weatherproof switches 31 Rocker switches 32 Heavy duty switching units 33 Motorcycle handlebar switches 33 Flash control units 34 4-10026 WARNING LIGHT 5 YEAR WARRANTY E 12LED dual colour warning light Slimline (13mm deep) Built-in flasher Separate switching NEW 4-10026 1 The 4-10026 is a dual colour, slimline LED warning light, just 13mm deep. The depth of the unit removes the need to cut holes into bodywork and recess the light to limit protrusion, without compromising light output. The 4-10026 has 12 LEDs which allow the full light to illuminate in either of two chosen colours. NEW 4-10026 12LED ultra slim warning light Dimensions (mm): 124L x 31H x 13D Supply voltage (DC): 10-40 Order codes Dual colour EC65 amber/blue 4-10026-EAEB Dual colour EC65 blue/red 4-10026-EBER Dual colour blue/white 4-10026-BW Other colour combinations available - please contact sales for information Suitable for 12 or 24V use, the built-in flasher provides numerous single and dual colour patterns, and comes with synchronisation mode for multiple lights and dim mode. EC65 approvals: Class 2 amber/blue/red combinations. Dual colour All LEDs operate in the selected colour (LEDs change colour)
4-10014/16 WARNING LIGHTS 5 YEAR WARRANTY E Ultra-thin - just 10mm deep Built-in flasher Single or split colours Separate switching on split colour versions 2x6LED version also available (4-10016-D) 4-10014 4-10016-D 4-10016 With a depth of just 10mm, the 4-10014/4-10016 slim LED range defines a new standard in warning lights. This ultrathin unit removes the need to cut holes into bodywork and recess the lights to limit protrusion. With its very powerful output using 3W LEDs and many integrated functions, the extremely thin design does not compromise performance. The built-in flasher includes 27 patterns and is suitable for 12 or 24V use. Dim mode is also included for optional night-time use along with synchronisation mode for multiple lights. Lights can be single or split colour. Split colour versions have either 2 + 2 LEDs or 3 + 3LEDs and each colour can be independently controlled. The 6LED versions are also available in double row format (4-10016-D) and consist of two independently controlled 4-10016 units sharing a common mount plate for ease of installation. This unit provides even higher light output whilst retaining the 10mm depth. EC65 approvals: 6LED single and double row versions are EC65 approved in amber (Class 1) and blue (Class 2). Number of LEDs 4 6 2 x 6 Dimensions (mm) 90L x 29H x 10D 124L x 31H x 10D 124L x 60H x 10D Supply voltage (DC) 10-30 10-40 10-40 Order codes Amber 4-10014-A 4-10016-EA 4-10016-D-EAA Blue 4-10014-B 4-10016-EB 4-10016-D-EBB Blue/red (split colour) 4-10014-BR 4-10016-BR 4-10016-D-EBR Blue/white (split colour) 4-10014-BW 4-10016-BW 4-10016-D-EBW Amber/blue (split colour) 4-10014-AB 4-10016-AB 4-10016-D-EAEB Red 4-10014-R 4-10016-R 4-10016-D-R White 4-10014-W 4-10016-W 4-10016-D-W Other colour combinations are available - please contact our sales team for more details Split colour Just 10mm deep Half of LEDs are one colour and half are another colour (LED colour is fixed) See dash/deck mount versions on page 14 2
4-10415 WARNING LIGHT 5 YEAR WARRANTY E EC65 approved 4LED warning light Compact but powerful Single, split or dual colour options Simple surface fixing Built-in flash controller 4-10415 4-10415 with 4-1305 flush mount rubber bezel Designed for surface or recess mounting, the 4-10415 s compact body houses 4 or 8 x 3W LEDs providing a powerful warning output. A heavy duty metal base makes the light robust and also provides ample heatsinking for a long and reliable LED life. The unit is supplied with a neat plastic bezel designed for easy surface mounting; a recess mount rubber housing is also available. The built-in 10-40V flasher has selectable patterns (27 patterns on the 4-10145; 14 patterns on the dual colour (-D) version), with both models having day/night brightness modes and a synchronisation mode for multiple units. The 4-10415 is available in three different formats: Single colour type - four same colour LEDs Split colour type - two LEDs of one colour + 2 LEDs of another colour Dual colour type - four dual colour LEDs which allow the full light to illuminate in either of two chosen colours Both split and dual colour types allow independent control of each colour. EC65 approvals: Class 1 amber or blue and Class 2 red (single colour versions). Dimensions (mm) 120L x 36H x 25D Supply voltage: 10-40V Order Code Description 4-10415-EA 4LED surface mount, EC65 Class 1 amber 4-10415-EB 4LED surface mount, EC65 Class 1 blue 4-10415-ER 4LED surface mount, EC65 Class 2 red 4-10415-x/4-10415-xx 4LED surface mount, green or white or alternating 2+2LEDs (split colour) all colours 4-10415-D-xx 4 dual LED (4 optics) surface mount, dual colour combinations 4LEDs for each colour 4-1305 Flush mount rubber bezel for 4-10415 Clear lenses as standard. Coloured lenses are available to special order - please enquire for prices Split colour Dual colour Two LEDs of one colour and two of another (LED colour is fixed) All four LEDs operate in the selected colour (LEDs change colour) 3 See dash/deck mount versions on page 13
4-1548 COMPACT WARNING LIGHTS 5 YR WARRANTY E Ultra-compact, high output warning light EC65 Class 2 approved in amber, blue and red Single hole or surface mount versions 4-1548-S (surface mount) 4-1548 with 4-1005 L bracket 4-1548 (single hole mount) At just 50mmL x 40mmH, the 4-1548 is a very compact EC65 approved warning light that uses 6 x 3W LEDs and a purposedesigned optic lens. It is available as a single hole mount version. To install, simply drill a 20mm round hole which then acts as the fixing point and cable entry aperture (suitable for mounting panels of up to 5mm thick). When fitted, the light has a visible depth of just 16mm. Alternatively, a surface mount model is available incorporating a bezel that sits flush against the vehicle with 4-1548-S fitted with 4-10500 angled rubber mount no rear protrusions. The surface bezel is finished in black or white as standard, with other colours available to order. The 4-1548 is available in amber, blue or red, and is designed to operate with an external flasher providing an output of 10-40V - see page 34 for more information on flashers. A 20 degree angle-down moulded rubber mount is also available to direct the light downward or to compensate for non-vertical mounting surfaces. EC65 approvals: Class 2 amber, blue or red LEDs. Dimensions (mm) 4-1548-Ex Single hole mount, EC65 Class 2 amber, blue or red LEDs 50L x 40H x 34D1/16D2 4-1548-x Single hole mount, green or white LEDs 50L x 40H x 34D1/16D2 4-1548-S-Ex Surface mount, black bezel, EC65 Class 2 amber, blue or red LEDs 85L x 55H x 26D 4-1548-SW-Ex Surface mount, white bezel, EC65 Class 2 amber, blue or red LEDs 85L x 55H x 26D 4-1548-S-x Surface mount, black bezel, green or white LEDs 85L x 55H x 26D 4-1548-SW-x Surface mount, white bezel, green or white LEDs 85L x 55H x 26D 4-1005 L bracket for 4-1548 lights (finished in black) 45L x 56H x 31D 4-10500 20 degree angled rubber mount for 4-1548 light 90L x 59H x 22D (max) 6-62240 2 x 5A flasher, 18 flash patterns plus cruise and high/low power modes. Runs up to 2 lights per output, 10-30V input, 3 year warranty H L D2 D1 4
4-1043/44/48 DIRECTIONAL LIGHTS 5 YEAR WARRANTY E 4-1048 with surface bezel 2 x 4-1048 with 4-1238 double vertical bezel 4-1044 with surface bezel 4-1043 with flush bezel 4-1303 rubber bezel 4-1048 with L bracket 4-1308 rubber bezel 5 Impact 4-1043, 4-1044 and 4-1048 units are highly versatile, ultra-bright 3, 4 and 8 LED module directional lights. 8 LED modules (4-1048) are EC65 approved in blue and amber, with single, dual colour and infrared versions also available. Standard 3 and 4LED versions are 12V rated; 3LED 12/24V models are also available for 10-40V operating range but require an external flasher. 8LED versions (4-1048) are 10-40V rated as standard. 3LED modules Dimensions (mm) 69L X 27H x 27D 4-1043-x 3LED module with integral flasher, 12V only 4-1443-x 3LED module, 10-40V - requires external flasher Mounting options for 4-1043 and 4-1443 4-1003 L mounting bracket 4-1103-B or W Black or white bezel 4-1103-C Chromed bezel 4-1203-B or W Recessed black or white bezel 4-1203-C Recessed chromed bezel 4-1303 Flush mount moulded rubber housing Flasher units 6-62240 2 x 5A flasher, 18 flash patterns plus cruise and high/low power modes Runs up to 2 lights per output, 10-30V input 3 year warranty Please specify required LED and bezel colours when ordering. LED colours: amber, blue, green, red or white Bezel colours: black, chromed or white All bezels are supplied with gasket and mounting plate A range of fixing brackets and bezels is available, including double fixing bezels that allow modules to be stacked vertically or horizontally, and a neat flush-mount, moulded rubber housing for recess mounting. All units with integral flasher provide selectable flash patterns and synchronisation mode for multiple units. EC65 approvals: Class 1 amber or blue (4-1048 8LED module). 4LED modules with integral flasher, 12V only Dimensions (mm) 55L X 45H X 27D 4-1044-x 4LED module 4-1004 L mounting bracket 4-1104-B or W Black or white bezel 4-1104-C Chromed bezel 4-1204-B or W Recessed black or white bezel 4-1204-C Recessed chromed bezel 4-1304 Flush mount moulded rubber housing 8LED modules with integral flasher, 10-40V Dimensions (mm) 100L x 45H x 27D 4-1048-EA/EB 8LED module - EC65 Class 1 amber or blue 4-1048-x 8LED module - green, red or white 4-1048-xx 8LED split colour - all colours, 4+4LEDs alternating 4-1048-IR 8LED infrared 840-870nm or 930-960nm 4-1008 L mounting bracket 4-1108-B or W Black or white bezel 4-1108-C Chromed bezel 4-1208-B or W Recessed black or white bezel 4-1208-C Recessed chromed bezel 4-1308 Flush mount moulded rubber housing For prices for double mount bezels (for 2 x 4-1048 lights) please contact our sales team
IMPACT 9LED DIRECTIONAL LIGHTS 5 YR WARRANTY E EC65 approved Simple surface fixing Built-in flash controller Designed for simple surface mounting, the 4-10409 directional warning light range offers a choice of black, chromed, white or yellow mounting bezels and amber, blue, green, red or white LEDs. The 9LED arrangement provides three independent groups of three LEDs, which can be a single uniform colour or alternating colours, allowing a dual colour indicator in various colour combinations. Seventeen flash patterns are built into the device as standard, which can be easily selected and adjusted by the user as required. Standard features also include synchronisation of multiple units and dimming function for night use. Latest LED technology, coupled with a highly effective optical lens design, provide an impressive wide angle light output and a working life in excess of 50,000 hours. Standard lenses are clear, with amber, blue or red lenses available - please contact sales for prices. Materials: Strong UV stabilised polycarbonate lens and bezel. Supply voltage: 10-40VDC. EC65 approvals: Class 2 amber or blue. Dimensions (mm) 182L x 77H x 38D (7 x 3 x 1.5 ) Order Code Description 4-10409-EA 9LED EC65 Class 2 amber 4-10409-EB 9LED EC65 Class 2 blue 4-10409-xxx 9LED green, red, white or mixed colours, 3+3+3 LEDs alternating Please specify LED and bezel colours when ordering LED colours: amber, blue, green, red or white Bezel colours: black, chromed, white or yellow Matching scene light see 4-10412 (page 21) 6
WIDE ANGLE DIRECTIONAL LIGHTS 5 YEAR WARRANTY E EC65 Class 2 approved Wide viewing angle Choice of mounting options 10-40V supply range 4-10418 + 4-10001 4-10418 + 4-10002 4-10418-S 4-10418 + 4-10003 The 4-10418 is a low profile, wide angle directional warning light which provides high intensity output over a full 180 degree area. This is achieved using eight high output LEDs and an optical lens design to distribute the light evenly. Fully weatherproof, the 4-10418 is suitable for exterior use. The sophisticated built-in flasher includes high/low output modes, and multiple lights can be synchronised for simultaneous or alternating flash patterns. Cruise mode is also included. The 4-10418-S is supplied with the light mounted into a neat surface-mount, cast metal housing, or can be used in conjunction with a choice of additional fixing brackets: 4-10001 - fixed surface mount that does not require access to the rear of the light for fixing 4-10002 - adjustable surface mount bracket allowing the light to be angled up or down 4-10003 - allows the light to be angled up or down but is designed to fix the lights at a 45 degree angle. This bracket is ideally suited to motorcycle applications, allowing a pair of lights to each point out at 45 degrees and provide a full intensity coverage over 180 degrees (see illustration below) EC65 approvals: Class 2 amber, blue and red LEDs. 4-10418 dimensions (mm) excluding bracket 155L x 32H x 48D 4-10418-S dimensions (mm) 184L x 34H x 50D Order code (separate bracket type) Order code (cast housing - no bracket required) Description 4-10418-EA-F 4-10418-S-EA-F 8LED wide angle warning light, amber LEDs EC65 Class 2 4-10418-EB-F 4-10418-S-EB-F 8LED wide angle warning light, blue LEDs EC65 Class 2 4-10418-ER-F 4-10418-S-ER-F 8LED wide angle warning light, red LEDs EC65 Class 2 4-10418-BR-F 4-10418-S-BR-F 8LED wide angle warning light, dual colour (4+4LEDs) blue/red LEDs 4-10418-x-F 4-10418-S-x-F 8LED wide angle warning light, green or white LEDs Mounting brackets (order in addition to 4-10418 lights) 4-10001 Surface mount bracket 4-10002 U bracket mounting assembly (with vertical swivel) 4-10003 U bracket 45 degree angle mounting assembly (with vertical swivel) 2 x 10418 lights arranged to provide 180 degree full intensity coverage using 4-10003 brackets H D L 7
4-2033/34/53 LED WARNING LIGHTS 2 YEAR WARRANTY 4-2033 3LED economy surface mount warning light Built-in flasher 14 patterns 10-30V supply range (suitable for 12 or 24V use) Amber LEDs as standard - other colours available to order 4-2033 is a low cost, surface mount 3LED warning light. The neat plastic bezel makes it easy to install using just two screws. Dimensions (mm) 99L x 38H x 28D Order Code Description 4-2033-A 3LED warning light - amber LEDs, black bezel Other colours are available to order - please contact our sales team The unit has a built-in flasher with 14 selectable patterns. A synchronisation wire allows multiple lights to be synchronised. 4-2034 4LED economy surface mount warning light Built-in flasher 24 patterns 10-30V supply range (suitable for 12 or 24V use) Amber or red LEDs - other colours available to order NEW Similar to the 4-2033, but with the enhanced output of four A synchronisation wire allows multiple lights to be LEDs. The 4-2034 has an integral flasher with 24 selectable synchronised. patterns. Dimensions (mm) 120L x 38H x 28D Order Code Description 4-2034-A 4LED warning light - amber LEDs, black bezel 4-2034-R 4LED warning light - red LEDs, black bezel Other colours are available to order - please contact our sales team for assistance 4-2053 3LED economy surface mount warning light Built-in flasher E 20 patterns 10-30V supply range (suitable for 12 or 24V use) The 4-2053 is an EC65 approved surface mount 3LED warning light. It features a cast metal bezel which secures the light using just two screws and provides excellent heatsinking to maximise LED performance. The built-in flasher provides 20 selectable patterns and a synchronisation wire allows multiple lights to be synchronised for simultaneous or alternating flashing. EC65 approvals: Class 1 amber or blue. 4-2303 rubber housing for 4-2053 Dimensions (mm) 83L x 25H x 19D Order Code Description 4-2053-EA 3LED warning light - EC65 Class 1 amber, black bezel 4-2053-EB 3LED warning light - EC65 Class 1 blue, black bezel 4-2053-R 3LED warning light - red, black bezel 4-2303 Flush mount moulded rubber housing for 4-2053 8
4-10446/4-10479 WARNING LIGHTS 5 YEAR WARRANTY E Flat-back design - no need to cut recessing holes into the vehicle Large warning lights - 6x4 and 9x7 EC65 Class 2 approved in amber, blue and red Simple surface fixing Integral flasher 10-40V supply range suitable for 12/24 operation 4-10479 (black) 4-10479 (chrome) 4-10446 With dimensions of 150 x 100mm (6 x 4 ), the 4-10446 is ideal for use on a wide range of larger vehicles and features eight latest generation, high power LEDs. Its depth of just 24mm makes it ideal for unobtrusive surface mounting on the side of the vehicle, avoiding the need to make large cutouts. The larger 16LED 4-10479 is of a similar design but just 25mm deep. Both lights incorporate an integral flasher suitable for 12 or 24V use (10-40V supply) which provides a choice of 12 patterns. Multiple lights of either type can be synchronised for simultaneous or alternating flashing, and other functions include high/low power selection and cruise mode. The lights are easy to install by means of two or four screws. Both units have a flat-back mount with black bezel supplied as standard. Other bezel colours are available to order - please contact our sales team for more information. EC65 approvals: Class 2 amber, blue or red (4-10446), Class 2 blue (4-10479). 9 4-10446 (6 x 4 ) Dimensions (mm) 150L x 100H x 24D Order Code Description 4-10446-EA 8LED 6 x 4 Surface mount EC65 Class 2 amber 4-10446-EB 8LED 6 x 4 Surface mount EC65 Class 2 blue 4-10446-ER 8LED 6 x 4 Surface mount EC65 Class 2 red 4-10446-xx 8LED 6 x 4 Surface mount split colours - all colours 4-10446-x 8LED 6 x 4 Surface mount green or white 4-10479 (9 x 7 ) Dimensions (mm) 228L x 176H x 25D Order Code Description 4-10479-A 16LED 9 x 7 Surface mount amber 4-10479-EB 16LED 9 x 7 Surface mount EC65 Class 2 blue 4-10479-xx 16LED 9 x 7 Surface mount split colours - all colours 4-10479-x 16LED 9 x 7 Surface mount green, red or white Please specify lens and bezel colours when ordering Lens colours: clear as standard - amber, blue or red available to special order Bezel colours: black or chromed
SLIM WARNING LIGHTS 5 YEAR WARRANTY E EC65 approved 6LED warning light Very low profile, versatile design Supplied with multiple mounting brackets 10-30V supply range suitable for 12 or 24V use 4-1641 Lip mount bracket 4-1642/1643 4-1601 rubber bezel Surface mount bracket The 4-1641 is a very versatile 6LED slim, low profile warning light which has a built-in flasher with 29 selectable patterns and synchronisation function to control up to eight lights. The 4-1642 is similar to the 4-1641 but with a linear optic for enhanced light output. Also using a linear optic, the 4-1643 has 12 LEDs, providing dual colour output. The complete light operates in the selected colour. With 4-1643-D versions, the light alternates between colour 1 and colour 2; with 4-1643-DI models, each colour is independently controlled via a separate trigger wire. Units can be directly mounted onto a surface or in many different ways using the surface or lip mount brackets provided, such as to a panel or grille edge, both of which allow the light to be tilted. The optional 4-1601 rubber mount allows the light to be flush mounted - please order separately if required. All versions are protected to IP67 suitable for interior or exterior use. EC65 approvals: Class 1 amber or blue. Dimensions (mm) 130H x 24W x 17.5D 4-1641 6LED low profile warning light (TIR optic) - designed for horizontal mounting 29 flash patterns 4-1641-EA Universal mount, EC65 Class 1 amber 4-1641-EB Universal mount, EC65 Class 1 blue 4-1641-R Universal mount, red 4-1641-W Universal mount, white 4-1601 Flush/recess mount moulded rubber housing for 4-1641 4-1642 6LED low profile warning light (linear optic) - designed for horizontal mounting 29 flash patterns 4-1642-EA Surface mount, EC65 Class 1 amber 4-1642-EB Surface mount, EC65 Class 1 blue 4-1642-X Surface mount, red, white or split colour combinations - please specify when ordering 4-1601 Flush/recess mount moulded rubber housing 4-1643 12LED surface mount low profile warning light (linear optic) DUAL COLOUR -DI versions allow independent control of each colour Flash patterns: -D models 29, -DI models 81 4-1643-D-XX Dual colour - amber/red, blue/red or blue/white - 29 patterns 4-1643-DI-BR Dual colour - blue/red - independent switching - 81 patterns 4-1643-DI-EA/EB Dual colour - EC65 Class 1 amber Class 1 blue - independent switching - 81 patterns 10
SLIM VERTICAL WARNING LIGHT 5 YEAR WARRANTY E Purpose designed and EC65 approved for vertical mounting Produces wide horizontal beam spread Very low profile design Built-in flasher Suitable for 12 or 24V operation NEW The 4-1641-V has been purpose designed and EC65 approved for vertical mounting. The optical design ensures that, with the unit mounted on a vertical axis, the light is distributed correctly in accordance with EC65 requirements. In contrast, conventional warning lights designed to be mounted only on a horizontal axis produce a very narrow horizontal beam spread when mounted vertically. The 6LED slim, low profile warning light operates from 10-30V and is suitable for 12 or 24V use. The 4-1641-V has a built-in flasher with 12 selectable patterns plus dim mode and a synchronisation function to control up to eight lights. EC65 approvals: Class 2 amber or blue. Normal warning lights produce a very narrow vertical beam when mounted vertically 4-1641-V produces a wide horizontal beam spread when mounted vertically Dimensions (mm) 130H x 24W x 17.5D 4-1641-V 6LED low profile warning light (TIR optic) - designed for vertical mounting 12 flash patterns 4-1641-V-EA 6LED vertical mount, EC65 Class 2 amber 4-1641-V-EB 6LED vertical mount, EC65 Class 2 blue 4-1641-V-R 6LED vertical mount, red 4-1641-V-W 6LED vertical mount, white 4-1601 Flush/recess mount moulded rubber housing 11
NUMBER PLATE MOUNTED LIGHTS 5 YEAR WARRANTY E 4LED and 6LED options Ideal for covert applications Excellent fend-off function when emerging at junctions 6LED version is EC65 approved Class 2 in amber and blue NEW RANGE 5-7164/5-7166 number plate plinth 5-7064/5-7066 number plate end housing 4-1641-V 4-10014 Number plate mounted warning light systems emit sideways and forward warning light, providing excellent protection for vehicles emerging at junctions. They are also ideally suited for covert applications. Once activated, the powerful warning lights operate in a synchronised warning pattern providing excellent visibility to both the side and front of the vehicle. The versions with 4-10014 warning lights are designed to maximise vertical light spread and 4-1641-V lights to maximise horizontal light spread. The 5-7166 is designed to be easily and neatly mounted behind a number plate. To install, simply remove the number plate, fit the plate to the warning light unit and then refit in the original number plate position. 5-7064/5-7066 are separate end housings for mounting to each end of a number plate. 5-7164/5-7166 is a complete assembly where the number plate is mounted to the front. With both versions, all fixing holes are covered by the number plate. EC65 approvals: Class 2 amber or blue. Dimensions (mm) 5-7064/5-7066: 140H x 79L x 36D 5-7164/5-7166: 140H x 619L x 39D 5-7064-x Pair of number plate end housings with 4-10014 4LED warning lights - amber, blue, red or white LEDs 5-7066-EA/EB Pair of number plate end housings with 4-1641-V 6LED warning lights - EC65 Class 2 amber or blue 5-7066-x Pair of number plate end housings with 4-1641-V 6LED warning lights - red or white LEDs 5-7164-x Number plate mounted warning system with 2 x 4-10014 4LED warning lights - amber, blue, red or white LEDs 5-7166-EA/EB Number plate mounted warning system with 2 x 4-1641-V 6LED warning lights - EC65 Class 2 amber/ blue 5-7166-x Number plate mounted warning system with 2 x 4-1641-V - 6LED warning lights - red or white LEDs Replace -x with required LED colour (A, B, R or W) 12
WINDSCREEN MOUNTED LIGHTS 5 YEAR WARRANTY E EC65 approved Single, dual or split colour options Ventilation slot to assist windscreen de-misting Triple suction cups for secure fixing 4-1055-I The 4-1055 and 4-1065 are compact but powerful windscreen/deck mounted variants of the popular 4-10415 warning light (see page 3), available in a choice of single, dual and split colour configurations. Units are available with either a cigar plug connector (4-1055) or with wires for permanent installation (4-1065). Dash/deck mount variants can be suction-mounted to the windscreen or permanently fixed, and are supplied with a multi-core loom instead of a cigar lead, with wires for pattern change, high/low intensity, synchronisation and colour select (on split or dual colour types). The lights have built-in flashers offering multiple patterns and are suitable for 12 or 24V operation. 4-1055 versions are available with a pattern change button. Alternatively the light can be ordered with a pre-set fixed pattern. The mounting bracket allows both the reach and angle of the light to be adjusted, making it suitable for use in a variety of vehicles. A ventilation slot is included in the visor light to allow airflow and aid effective windscreen demisting. EC65 approvals: Class 1 amber or blue and Class 2 red (single colour versions). Windscreen mount Supplied with light shield, suction mounts and lead with switched options and fused cigar plug 27 patterns on single or split colour combinations; 14 patterns on dual colour combinations 10-40V supply range (suitable for 12 or 24V use) Dimensions (mm) 154mmW x 130D x 53H 4-1055-I-x/xx 4LED windscreen mount, single colour EC65 Class 1 amber or blue, Class 2 red, with single switch lead 4-1055-P-x/xx 4LED windscreen mount, single colour EC65 Class 1 amber or blue, Class 2 red, with double switch lead for pattern change. Also available in green or white, or split colour LEDs (2 + 2 - please specify required colours) 4-1055-S-xx 4LED windscreen mount, split colour, with double switch lead for individual colour selection 4-1055-D-P-xx 4 dual LED windscreen mount, dual colour, with double switch lead for pattern change 4-1055-D-S-xx 4 dual LED windscreen mount, dual colour, with double switch lead for individual colour selection Dash/deck mount Supplied with light shield, suction mounts and 1.5 metre lead with wiring options for: pattern/high-low intensity/ synchronisation/colour selection. Dimensions (mm) 154mmW x 130D x 53H 4-1065-x/xx 4LED deck/rear screen mount EC65 Class 1 amber or blue, Class 2 red. Also available in green, white or split colour options 4-1065-D-xx 4 dual LED deck/rear screen mount, dual colour - amber/blue or blue/red Please replace x with required colour(s) when ordering Split colour Dual colour 13 Half of LEDs are one colour and half are another (LED colour is fixed) All LEDs operate in the selected colour (LEDs change colour)
WIND/REAR SCREEN LIGHTS 5 YEAR WARRANTY E EC65 approved Single, dual or split colour options Ventilation slot to assist windscreen de-misting Triple suction cups for secure fixing NEW 4-1067 4-1056-I The 4-1056 and 4-1066 are compact but powerful screen/ deck mounted variants of the popular 4-10016 warning lights (page 2), and the 4-1067 a variant of the 4-10026 (page 1). Lights are available in single, dual or split colour versions with a cigar plug connector or wires for permanent installation. With its shortened visor, the 4-1067 is designed for mounting onto vertical or near vertical rear windscreens. The lights have built-in flashers offering multiple patterns and are suitable for 12 or 24V operation. 4-1056 versions are available with a pattern change button or can be ordered with a pre-set fixed pattern if preferred. Dash/deck mount variants can be suction-mounted to the windscreen or permanently fixed, and are supplied with a multi-core loom instead of a cigar lead, with wires for pattern change, high/low intensity, synchronisation and colour select (on split or dual colour types). A ventilation slot is included in the visor light to allow airflow and aid effective windscreen demisting. EC65 approvals: Class 1 amber/class 2 blue (single colour versions). Class 2 amber/blue/red combinations (dual colour versions). Windscreen mount Supplied with light shield, suction mounts and lead with switched options and fused cigar plug. 27 flash patterns, 10-40V supply range (suitable for 12 or 24V use) Dimensions (mm) 154W x 130D x 53H 4-1056-I-x/xx 6LED, single colour - EC65 Class 1 amber, Class 2 blue, with single switch lead 6LED, single colour - EC65 Class 1 amber, Class 2 blue, with double switch lead for pattern change. 4-1056-P-x/xx Also available in green, red or white, or split colour LEDs (3 + 3 - please specify required colours) 4-1056-S-xx 6LED, split colour, with double switch lead for individual colour selection 12LED dual colour, one button per colour 4-1056-D-I-xx All colours - EC65 approved in amber/blue/red combinations (Class 2) 12LED dual colour, one button activates lights in dual colour mode/one button for pattern selection 4-1056-D-P-xx All colours - EC65 approved in amber/blue/red combinations (Class 2) Dash/deck mount with full length visor Supplied with light shield, suction mounts and 1.5 metre lead with wiring options for: pattern/high-low intensity/ synchronisation/colour selection. Dimensions (mm) 154W x 130D x 53H 6LED, single colour - EC65 Class 1 amber, Class 2 blue. Also available in green, red or white or split NEW 4-1066-x/xx colours NEW 4-1066-D-xx 12 LED, dual colour, all colours - EC65 approved in amber/blue/red combinations (Class 2) Rear screen mount with reduced length visor Supplied with light shield, suction mounts and 1.5 metre lead with wiring options for: pattern/high-low intensity/ synchronisation/colour selection. Dimensions (mm) 154W x 48D x 53H 6LED, single colour - EC65 Class 1 amber, Class 2 blue, with single switch lead. Also available in green, NEW 4-1067-x/xx red or white or split colour variants NEW 4-1067-D-xx 12LED, dual colour, all colours including EC65 Class 2 amber/blue/red combinations Split colour Dual colour Half of LEDs are one colour and half are another (LED colour is fixed) All LEDs operate in the selected colour (LEDs change colour) 14
WINDSCREEN MOUNT LIGHTS 2 YEAR WARRANTY Low cost 4+4LED windscreen light Linear optic projects a uniform warning signal Triple suction cups for secure fixing NEW The 4-2060 light provides a powerful 8LED output in single colour, or amber blue or red (4+4LED) combinations. The mounting bracket allows both the reach and angle of the light to be adjusted, making it suitable for use in a variety of vehicles. 4-2060 The unit is supplied with a cigar plug connector and triple suction cups to affix securely to the windscreen. The light has a built-in flasher offering multiple patterns and is suitable for 12V operation. Dimensions (mm) 237W x 130D x 45H Order Code Description 4-2060-xx Dual 4+4 LED modules - amber, blue or red combinations, 12V 4-1741/42 PERSONAL SAFETY LIGHT 1 YEAR WARRANTY Compact wearable light with white LED torch USB rechargeable battery (USB cable provided) Typically 10 hours run time per charge Fully weatherproof, suitable for outdoor use 16mm deep 4-1741/4-1742 are small, lightweight wearable personal safety lights, easily attached to clothing via a sturdy, quickrelease clip. When activated, the light provides a highly visible flashing signal using eight coloured LEDs. 4-1741 - emits light from the side, providing warning in three directions. This version is ideal when fastened to epaulettes or a side pocket 4-1742 emits warning light to the front, providing a more intense single direction light Pressing the activation button toggles between off, coloured flashing mode and white light torch mode. It is also possible to switch modes by tapping the casing of the light. On both units, the white torch light is always emitted from the side. All models are fully weatherproof and suitable for outdoor use. The charger socket is protected by a rubber seal which remains attached to the light to prevent loss during charging. Recharge time is approximately four hours. 15 Dimensions (mm) 76L x 36H x 16D (excluding clip) Weight 50g Rechargeable personal safety light - side emitting LEDs Order Code Description 4-1741-A Amber LEDs - side emitting LEDs 4-1741-B Blue LEDs - side emitting LEDs 4-1741-R Red warning LEDs - side emitting LEDs Rechargeable personal safety light - front emitting LEDs 4-1742-A Amber warning LEDs - front emitting LEDs 4-1742-B Blue warning LEDs - front emitting LEDs 4-1742-R Red warning LEDs - front emitting LEDs Front emitting type Side emitting type
4-1420 LED HIDEAWAY UNIT E 3 YEAR WARRANTY EC65 approved in amber and blue (Class 1) Supplied with surface bezel and L bracket Can also be mounted in headlight In-line flash controller 4-2422 has dual colour heads with separate switching of each colour L bracket fixing 4-1420 Surface bezel fixing 4-2420/4-2422 linked pair with common flasher The 4-1420 is a high output LED hideaway light suitable for a variety of applications. It can be integrated within the normal vehicle lighting, or used as a standalone warning light by means of either a plastic surface mount bezel or a metal L bracket (both are supplied with the unit as standard). The light is also supplied with an in-line flasher that connects to the light head via a plug and socket connector. The unit includes 20 different flash patterns and has a synchronisation function to allow multiple lights to function in either simultaneous or alternating flash mode. The 4-1420 is a single light head unit, and the 4-2420 a dual light head unit, with both heads sharing a common flasher. Both versions operate from 10-30V and each light head uses four 3W LEDs, giving a very powerful output. 4-1420/4-2420 is EC65 approved in blue and amber. The 4-2422 is a special dual colour version. Each head has two blue LEDs and two red LEDs and each colour can be separately switched. Multiple simultaneous and alternating dual colour patterns are included. Lights are protected to IP65. EC65 approvals: Class 1 amber and blue. 57mm Flasher dimensions (mm) - see drawing for head dimensions: 4-1420/4-2420: 115L x 29H x 19D 4-2422: 85L x 62H x 29D 10-30V supply Order Code Description 12W LED hideaway directional light. Available in EC65 Class 1 amber or 4-1420-xx blue, or red or white LEDs 4-2420-x Linked pair of 12W LED hideaway directional lights (common flasher) Pair of 12W LED hideway directional lights with common flasher. Split 4-2422-x/x colours (2 + 2 LEDs per head) - amber, blue, green, red or white, each colour separately switched/independently controlled Please replace -x with required LED colour (A, B, R or W) when ordering 18mm 7mm 25mm 49mm 38mm diameter 16
multi-module warning & arrowbars 5 YEAR WARRANTY Lengths from 160 to 975mm (6 to 38 ) Single or multiple colour options Longer lengths can be split with interconnecting wiring Can operate as warning, arrowbar or combined warning/arrowbar units 4-3444 4 module unit 5-34412 12 module Arrowbar Multi-module bars are available in 2 to 14 module configurations, with 3LEDs per module, and almost any combination of LED colours. 2-4 module units have integral flasher with a choice of programmable warning patterns and synchronisation options 8-14 module bars have extra functionality and can be used as warning lights or programmed as arrowbars (to direct traffic) with either integrated or separate warning functions 8-14 module units without FP in the part number have three separate, individually programmed flash sequence modes. Any of the three modes can be activated by applying a 12V signal to the appropriate trigger wire A flash mode can be a warning pattern, an arrow pattern or a combination of arrow pattern followed by a warning pattern (all as one cycle). Any of the programmed modes can be re-programmed at any time Units with FP in the part numbers have four trigger wires instead of three, pre-configured for arrow left, arrow right, centre out and warning pattern (side to side alternating using all modules). FP range bars cannot be reconfigured Units are supplied complete with mounting brackets for vertical or horizontal mounting, bolts and wiring loom. The brackets incorporate mounting holes which allow the bar to be tilted for more precise directional lighting output. For ease of installation, all versions and sizes can be supplied in split configuration with linking cable. Units are suitable for 12 or 24V operation. Arrowbar controllers are ordered separately to suit the required operation mode - please contact sales for advice. 17 Multi-module warning bars (do not include arrow patterns) Dimensions (mm) 30H x 45D 4-3442-xx 160mm long, 2x3LED modules 4-3443-xxx 240mm long, 3x3LED modules 4-3444-xxxx 322mm long, 4x3LED modules Multi-module warning bars and arrowbars (with arrow patterns) Dimensions (mm) 30H x 45D 5-3448-x8 25 (644mm) - 8x3LED modules (configuration A) 5-3448-x4x4 25 (644mm) - 8x3LED modules (configuration B - 4 inner plus 4 outer modules or configuration C) 5-3448-x6x2 25 (644mm) - 8x3LED modules (configuration B with 6 inner and 2 outer) 5-34410-x10 32 (810mm) -10x3LED modules (configuration A) 5-3448+2-x8x2 32 (810mm) - 10x3LED module (configuration D with 8 inner plus 2 outer modules) 5-34412 -x12 38 (975mm) - 12x3LED modules (configuration A) 5-3448+4-X8X4 38 (975mm) - 12x3LED module (configuration D with 8 inner plus 4 outer modules) 5-34410+4- X10X4 45 (1140mm) - 14x3LED module (configuration D with 10 inner plus 4 outer modules) 5-3448-X8-FP 25 (644mm) - 8x3LED modules (configuration E) 5-3448+2-X8X2-FP 32 (810mm) - 10x3LED modules (configuration F) 5-3448+4-X8X4-FP 38 (975mm) - 12x3LED modules (configuration F) Notes: 1) When ordering please specify the required configuration (A-F - see facing page) 2) Choice of amber, blue, green, red or white LEDs - please replace X with required LED module colours in above part numbers
multi-module warning & arrowbars 5 YR WARRANTY Configuration A All LED modules are the same colour. Unit has three separately programmable modes. Each mode can be a warning pattern, arrow pattern or combined warning and arrow pattern. Normally configured to display combined warning and arrow patterns whereby inner modules are displayed as an arrow pattern before flashing the two outer modules as a warning pattern, then repeating. All three modes are stored in separate memories and can be activated at any time by applying a positive signal to the relevant trigger wire. Configuration B Generally as configuration A except one or two outer modules at each end are a different colour to inner modules. Configuration C Generally as configuration A except that units incorporate two different colour LED modules, arranged with differing colour lights left and right. Configuration D Inner modules operate as configuration A. In addition, two or four outer modules are provided (one or two at each end) which are wired separately and operate completely independently of inner modules. A separate flash controller is required (e.g. 6-62240) for flashing of outer modules. Configuration E All LED modules are the same colour, four separate fixed modes, each with a separate trigger wire. Modes are arrow left, arrow right, centre out and side-to-side warning pattern. Configuration F Inner modules operate as configuration E. In addition, two or four outer modules are provided (one or two at each end), these are wired separately and operate completely independently of inner modules. A separate flash controller is required (e.g. 6-62240) for flashing of outer modules. All Arrowbars are supplied with built-in flasher Please order Arrowbar controllers separately if required 1 year warranty Order Code Description 6-63100 Sequential three pattern LED Arrowbar flasher with harness, 12-24V, 8 output (10-40V) 6-63101 Arrowbar switch panel, three patterns plus on/off 6-63102 De-luxe controller for operation of 5-3448 series Arrowbars, on/off plus selection of 4 patterns (arrow left, right or centre out or warning) 6-63101 6-63102 18
5-9406/5-9405 LED MESSAGE SIGNS 2 YEAR WARRANTY Weatherproof design 110mm high characters for increased viewing distance Amber or red LEDs Large memory - stores up to 99 messages Controller has back-lit LCD display for simple message selection and verification 5-9406 message sign Flip-up InfoSign The 5-9406-99 programmable LED InfoSign allows 9 x 110mm high characters to be displayed without the need for scrolling and is available with a choice of amber or red LEDs. 5-9405- 99 is similar, but shorter, with an 8-character display. Each individual character or symbol can be up to 110mm high, giving an excellent viewing distance. Haztec Windows based software is available allowing authorised users to create and store custom messages; a range of built-in options allows scroll, flash and wipe functions to be easily included. In addition to standard characters, users can also create custom bitmap symbols. Up to 99 different messages can be created and stored in the separate display controller. The controllers have a back-lit LCD display that allows the user to scroll through the library and activate the chosen message with a push of a button. Once activated, the chosen message is shown on the LED sign and also as a confirmation on the handset. 5-9406 controller 5-9405 controller The 9406 controller has a multi-line display that shows the currently displayed message whilst allowing the user to scroll through the list of stored messages and preselect the next message (current and next message are shown as separate rows on the LCD screen). 5-9406 also has an adjustable control that allows the brightness of both the message sign and the LCD controller screen to be set at an appropriate level for different conditions. Both controllers have illuminated buttons for night-time use. In addition to the standard version, electrically controlled flipup versions are also available, allowing the sign to be raised when in use. The flip-up mechanism is suitable for interior vehicle use only. Standard versions are suitable for 12V operation only, with 24V versions available to special order at additional cost. 19 5-9405 8 x 110m high character InfoSign Dimensions (mm) 510L x 140H x 42D 5-9405-16-R Programmable LED message sign with back-lit LCD 16 message controller - red LEDs only 5-9405-F-16-R Flip-up programmable LED message sign with back-lit LCD 99 message controller - red LEDs only 5-9405-99-R Programmable LED message sign with back-lit LCD 99 message controller - red LEDs only 5-9405-F-99-R Flip-up programmable LED message sign with back-lit LCD 99 message controller - red LEDs only 5-9402-99 Programming software and USB data lead for 5-9405-99 InfoSign 5-9405-99-CTR 99 message programmable LCD controller for 9405-99 5-9406 9 x 110mm high character InfoSign Dimensions (mm) 573L x 142H x 45D 5-9406-99-x Programmable LED message sign with back-lit LCD 99 message controller - amber or red LEDs 5-9406-F-99-x Flip-up programmable LED message sign with back-lit LCD 99 message controller - amber or red LEDs 5-9403-99 Programming software and USB data lead for 5-9406-99 InfoSign 5-9406-99-CTR 99 message programmable LCD controller for 9406-99 Please specify LED colour when ordering
5-9305 LED MESSAGE SIGN 2 YEAR WARRANTY Compact LED message sign 70mm high characters in amber or red LEDs Choice of weatherproof sign or flip-up models suitable for interior vehicle use 5-9305 with controller The 5-9305 is a smaller model in the Haztec programmable LED InfoSign range, featuring 70mm high, high intensity LED characters. The 5-9305 allows 9 characters to be displayed without the need for scrolling and offers a choice of amber or red LEDs. All InfoSigns are available as a flip-up version which allows the sign to be raised when in use, suitable for vehicle interior use only. 5-9305 controller InfoSigns are supplied as a complete kit including mounting brackets, bolts, wiring loom and controller 5-9305 9 x 70mm high character InfoSign Dimensions (mm) 464L x 86H x 50D 5-9305-99-x Programmable LED message sign with back-lit LCD 99 message controller - amber or red LEDs 5-9305-F-99-R Flip-up programmable LED message sign with back-lit LCD 99 message controller - red LEDs only 5-9301-V2 Programming software and USB data lead for 5-9305-99 InfoSign 5-9305-99-CTR 99 message programmable LCD controller for 9305-99 Please specify LED colour when ordering 20
4-10412 12LED SCENE LIGHT 5 YEAR WARRANTY 12 high output LEDs Optical design directs light downward Working life of over 50,000 hours Additional mount plate available to increase downward angle if required The 4-10412 Impact 12LED surface mount scene light from Haztec features latest LED and optical technology to provide effective work area illumination. The purpose-designed optical system directs the light to where it is needed, minimising glare and wasted light. Latest LED technology offers a much higher efficiency than traditional tungsten light sources and excellent colour rendering. Light distribution is uniform and angled down to maximise effectiveness. The light is concentrated from 0 to 30 degrees below horizontal, with peak output 15 degrees below horizontal. The beam width is 20 degrees either side of vertical. This carefully controlled distribution provides excellent coverage whilst minimising stray light and glare. In addition to the 15 degree downward angle provided by the optic design, a separate mounting adaptor is available that allows the scene light to be mounted at a downward angle of 30 degrees, giving a total of 45 degrees beam angle - ideal for high mounting heights or where there is a need to focus light near to the vehicle. Supply range is 10-40V suitable for operating from a 12V or 24V supply. The unit has a low power consumption, typically drawing 0.75A at 13.8V whilst producing approximately 800 Lumens output. Its power regulated design automatically compensates for supply voltage fluctuations. Simple surface fixing avoids the need to make cut-outs to install the light. The unit is supplied with a rubber seal and is secured in place with just two screws. A substantial cast metal mounting bezel provides a robust construction along with ample heat dissipation to ensure long LED life. The light is fully sealed to IP65 and designed to withstand vibration from heavy duty commercial vehicle applications. Light source: 12 x 1W high performance white LEDs. Materials: Strong UV stabilised polycarbonate lens and bezel. Bezel finishes: Black, chrome, white or yellow. Dimensions (mm) L182 x H77 x D38 4-10412-BL 12LED scene light - black bezel, 10-40V 4-10412-WH 12LED scene light - white bezel, 10-40V 4-10412-YL 12LED scene light - yellow bezel, 10-40V 4-10412-CH 12LED scene light - chrome bezel, 10-40V 4-10400 30 degree angle-down moulded rubber mounting plinth for additional downward beam angle Innovative optical design directs light downward 4-10400 rubber mount increases downward beam angle to 45 degrees 21
4-1809 9LED SCENE LIGHT 3 YEAR WARRANTY Designed for vertical mounting 0-60 degree vertical beam spread 80 degree horizontal beam spread 10-33V supply range suitable for 12 or 24V use The 4-1809 is a compact, high output LED scene light that has been purpose-designed for mounting on the side of vehicles. With a depth of just 30mm, the 4-1809 is very unobtrusive and has an optical design that directs the light in a carefully controlled area. The beam has an asymmetrical 60 degree vertical spread and an 80 degree horizontal spread. 4-1809 uses 9 LEDs and produces a light output of 1000 Lumens with a current consumption of just 12W. An advanced design, cast alloy metal base with integral heatsink fins provides excellent thermal management ensuring long LED life and high light output. The units operates from 10-33V, suitable for 12 or 24V use. Bezel finishes: Black, white or red (RAL 3000). Dimensions (mm) L250 x D30 x H57 4-1809-BL 9LED scene light - black housing 4-1809-RD 9LED scene light - red (RAL 3000) housing 4-1089-WH 9LED scene light - white housing D - 30mm H - 57mm L - 250mm 60 o Asymmetric beam 22
COMPACT LED SCENE LIGHTS 5 YEAR WARRANTY Powerful 10W LED Choice of flood or spot beam 10-40V supply suitable for 12/24V operation 400 Lumen output 4-1547-S-F surface mount (flood beam optic) 4-1547- S single hole mount (spot beam optic) 4-1547-S on 4-10500 angled rubber mount 4-1547-S mounted on optional 4-1005 L bracket 4-1547 10W LED scene lights are available in two different mounting styles and with flood or spot beam optics to suit a range of applications. The 4-1547 can be ordered as a surface-mount unit complete with cast surface bezel, or as a single hole mount version. The single hole version utilises a single round 20mm mounting hole that secures the product to the mounting surface and also acts as the cable entry facility. Surface versions are available with either black or white bezels. 4-1547 lights are suitable for 10-40V operation and incorporate integral heatsinking to provide a typical working life of 50,000 hours. A neat rubber plinth is available for surface mount versions that can be used to direct the beam downwards or to compensate for angled mounting surfaces. Dimensions (mm) 4-1547-F Flood light single hole mount, black bezel 50L x 40H x 24D1 + 16D2 4-1547-S Spot light single hole mount, black bezel 50L x 40H x 24D1 + 16D2 4-1547-S-F Flood light surface mount, black bezel 85L x 55H x 37D 4-1547-SW-F Flood light surface mount, white bezel 85L x 55H x 37D 4-1547-S-S Spot light surface mount, black bezel 85L x 55H x 37D 4-1547-SW-S Spot light surface mount, white bezel 85L x 55H x 37D 4-1005 L bracket for 4-1547(black) 45L x 56H x 31D 4-10500 20 degree angled rubber mount for 4-1547 90L x 59H x 22D (max) 23
60 & 90W HIGH POWER LED WORKLIGHTS 2 YR WARRANTY Very powerful, heavy duty light using multiple 10W Cree LEDs Choice of long range spot or wide angle flood beam IP67 rated 7-1160-F 7-1190-F 7-1160-S 7-1190-S 7-1160 and 7-1190 are heavy duty LED floodlights with Lumen outputs of 5,400 and 8,100 respectively. Both models use 10W Cree LEDs and are available in either wide angle 90 degree flood beam or long range 10 degree spot beam versions. Of rugged construction with a cast aluminium body and polycarbonate lens, lights are sealed to IP67 so are suitable for internal or external use. The front lens is secured with Allen screws and is gasketed for enhanced ingress protection. A heavy duty bracket allows the light to be securely fixed, and extensive heatsinking fins are incorporated to maintain a stable LED temperature to maximise performance and LED life. Dimensions (mm) 135L x 124D x 150H (without bracket) Supply voltage: 9-32V Lumens 7-1160-F 60W LED flood light (90 degree beam) 5,400 7-1160-S 60W LED spot light (10 degree beam) 5,400 7-1190-F 90W LED flood light (90 degree beam) 8,100 7-1190-S 90W LED Spot light (10 degree beam) 8,100 24
GENERAL LED WORKLIGHTS 1 YEAR WARRANTY Rugged and weatherproof Latest LED technology Long life and low current drain Typical working life of 30,000 hours NEW 7-1009-F 7-1418 7-1015-F 7-1018-C Haztec supplies a wide range of LED worklights which offer high light output with low current drain in comparison with earlier halogen technologies. With a choice of power outputs and beam patterns, there are lights for every requirement - from the compact 7-1418, which is available with a choice of flood or concentrated beams, to the very high 3800 Lumen output 7-1048. With the exception of the 7-1110 compact unit, all lights incorporate multiple LEDs. 7-1027-C 7-1048-F The range includes optics designed for short range, wide angle illumination, with other models providing an excellent combination of short range beam spread or long range performance. All lights in the range are suitable for 12 or 24V operation and feature stainless steel mounting brackets and bolts. Order code Shape/Type Dimensions (mm) excl Beam angle Watts Beam mount bracket (degrees) Lumens 7-1009-F Rectangular 112W x 81H x 56D 9W Flood 90 540 7-1015-F Square 110W x 128H x 46D 15W Flood 60 1200 7-1018-C Round 116W x 128H x 48D 18W Concentrated 30 1400 NEW 7-1418-F Rectangular 150W x 45H x 59D 18W Flood 60 1400 NEW 7-1418-S Rectangular 150W x 45H x 59D 18W Concentrated 30 1400 7-1027-C Square 106W x 128H x 55D 27W Concentrated 30 2200 7-1048-F Square 110W x 127H x 72D 48W Flood 60 3800 7-0000-CW Magnetic mount option with coil lead and switched plug for work lights 25
GENERAL LED WORKLIGHTS 1 YEAR WARRANTY Rugged and weatherproof Latest LED technology Long life and low current drain Typical working life of 30,000 hours NEW NEW 7-1426-C 167mm 7-1118-S 7-1020 NEW 7-1127 with swivel mount and handle For general applications, the 7-1426 s specially designed combination optic beam offers an excellent combination of range and beam spread. At just 76mm wide, the 7-1118-S projects a very powerful 1400 Lumen spot for its compact size. The 7-1020 is available as a conventional white light version and as a separate model (7-1020-BS) featuring blue LEDs which, with its special purpose optic, projects a concentrated circle of blue light downwards. The 7-1020-BS is intended to warn pedestrians of an approaching fork lift truck or similar vehicle. There are further worklights in the range, including wireless remote control motorised searchlights which provide very precise illumination of a scene - please see page 29. In addition, for applications requiring even larger amounts of light, Haztec s linear bar lights (page 27) offer outputs from 3,400 up to a very powerful 25,500 Lumens. Lights can be angled up or down for better illumination of the working area and are sealed to IP67 so are sufficiently robust for harsh environments. Order code Shape/Type Dimensions (mm) excl Beam angle Watts Beam mount bracket (degrees) Lumens 7-1426-C Rectangular 139L x 45H x 72D 15W Combination 20/40 1050 NEW 7-1118-S Square 76W x 83H x 42D 18W Concentrated 30 1400 NEW 7-1118-F Square 76W x 83H x 42D 18W Flood 60 1400 NEW 7-1020-BS Round 98W x 63H x 75D 20W Spot blue 5 1400 NEW 7-1020-S Round 98W x 63H x 75D 20W Concentrated 30 1600 NEW 7-1127-F Rectangular - with integral on/off switch NEW 7-1127-FM With magnetic mount and coil lead/plug 150W x 167H x 57D 27W Flood 60 2160 NEW 7-1127-C With switched coil lead/ plug 7-0000-CW Magnetic mount option with coil lead and switched plug for work lights 26
DUAL MOUNT LED WORKLIGHT 2 YEAR WARRANTY Powerful Osram LEDs New generation 15W LED floodlight (60 degrees), 9-32V supply Can be mounted vertically or horizontally IP67 rated Dimensions (mm) 150 x 80 x 38D (excluding bracket) 7-5430-F 15W LED floodlight (60 degrees), 9-32V 7-5430 lights are compact but with a high output. For ease of installation in a variety of locations the light can be mounted horizontally or vertically. This is easily achieved by fastening the mounting bracket to one of the two sets of mounting holes. 10 x Osram LEDs running at low individual current maximise LED efficiency, producing a very uniform beam with an output of 1375 Lumens (typically 30-40% higher than most low cost 15W LED worklights) yet with a current consumption of just 1.25A @12V / 0.625A@24V. Lights are sealed to IP67 so suitable for internal or external use and can operate from 9-32VDC. Stainless steel mounting brackets and bolts ensure long reliable service life. LINEAR BAR LIGHTS 1 YEAR WARRANTY Powerful Cree LEDs Spot, flood or combination beams Single or double row 10-30V NEW 7-1212-300-49-C 7-1222-234-42-C Linear bar lights are ideal for applications requiring large amounts of light. Units are rated from 40-288W and, with a maximum output of over 25,000 Lumens, are sufficient for the most demanding of tasks. Lights are available in single or double row configurations, with a choice of spot, flood or combination beam options. Combination beam versions are normally divided into three sections, flood/spot/flood, giving an excellent combination of both short and long range performance. All lights operate from 10-30V so are suitable for 12 or 24V use, and are sealed to IP67. The bar lights are supplied with mounting feet that slide along the body of the light for ease of installation. Mounting brackets allow the light to be angled up or down. 27 Order code Description Output (Lumens) Beam details Dimensions (mm) 7-1211-40-8-F 8 (200mm) 40W single row flood beam 3400 45 Flood 90D x 70H 7-1211-40-8-S 8 (200mm) 40W single row spot beam 3400 15 Spot 90D x 70H 7-1212-120-20-C 20 (520mm) 120W sgl row combination beam 10200 45 + 15 + 45 Flood/Spot/Flood 90D x 70H 7-1212-240-40-C 40 (1010mm) 240W sgl row combination beam 20400 45 + 15 + 45 Flood/Spot/Flood 90D x 70H 7-1212-300-49-C 49 (1240mm) 300W sgl row combination beam 25500 45 + 15 + 45 Flood/Spot/Flood 90D x 70H 7-1222-72-14-C 14 (342mm) 72W dbl row combination beam 5760 60 + 30 +60 Flood/Spot/Flood 80D x 82H 7-1222-180-32-C 32 (810mm) 180W dbl row combination beam 14400 60 + 30 +60 Flood/Spot/Flood 80D x 82H 7-1222-234-42-C 42 (1044mm) 234W dbl row combination beam 18700 60 + 30 +60 Flood/Spot/Flood 80D x 82H 7-1222-288-50-C 50 (1278mm) 288W dbl row combination beam 23040 60 + 30 +60 Flood/Spot/Flood 80D x 82H
7-7250 SELF PARKING HIGH POWER LED SEARCHLIGHT 50W LED searchlight Wired or wireless control Self-parking for safe use Long range beam CANbus control interface option Fully weatherproof design NEW 7-7250 The new 7-7250 motorised searchlight is a powerful LED searchlight for use in a variety of applications. The 50W LED cluster provides a high 1800 Lumen output. Peak light output is generated across a 10 degree horizontal and vertical spread, providing an excellent long range beam. Significant light output is also provided over a 30 degree spread giving wide, uniform short range coverage as well. The motorised mechanism allows unlimited 360 degree horizontal rotation, 90 degree upward vertical elevation and 30 degree downward elevation. Depending on the chosen controller, fast and slow movement speed is also available. A handheld wireless remote control is included as standard, and a dash mount remote control can be added if required. An additional interface can be supplied allowing the searchlight to be operated by any of the Haztec CANbus controllers such as the 8-82306 or 8-82312. When switched off, the light automatically self-parks in the home position for both tilt and rotation, ensuring a safe position that will not dazzle other vehicles when next switched on. This function also allows the operator to know exactly where the aim point of the light will be when switched on even if they do not have direct sight of the searchlight. A stylish, clear weatherproof dome provides excellent sealing against the elements. The 7-7250 is suitable for 12/24V operation. Beam angle 30 0-30 10 70 190 250 Metres 32 Lux 16 Lux 8 Lux 4 Lux 2 Lux 1 Lux Dimensions (mm) 120H x 212W x 280D 50W Self-parking motorised LED searchlight NEW 7-7250 Self-parking 50W motorised LED searchlight (12/24V) 8-82858 8 output CANbus switch module allowing searchlight to be controlled using Haztec CANbus handsets 8-82306 6 button CANbus switch with coiled lead and magnetic mount holder 8-82312 12 button CANbus switch with coiled lead and magnetic mount holder 28
TL SERIES MOTORISED SEARCHLIGHTS 1 YR WARRANTY Low profile Wireless remote control Wide angle rotation and elevation Halogen or LED options 7-1007-B 7-1150-B 7-1220-W Available in either halogen or LED versions, TL searchlights All versions have a uniform, long range, 8 degree spot beam. consist of a low profile motorised searchlight with a wireless The wireless remote control operates at 433.92Mhz and has remote control that allows the user full control of on/off a typical range of up to 65 metres in free air. rotate and elevate functions. TL searchlights provide a full Each unit is supplied with a single remote control, and 360 degree rotation and a 90 degree elevation, and are additional remote controls can be purchased separately. Up available in black or white housings. to four controllers can be programmed to work with one The light source for 7-1007 is a 12V 55W/24V 70W H3 light. A dash mount wireless remote is also available. halogen lamp offering a 1000 Lumen output spot beam. Designed for permanent mounting, the light has four 7-1150 has a 30W LED assembly and a purpose-designed fixing bolts. The light head can be removed from the base optical reflector to provide a 1200 Lumen output. 7-1220 is a for maintenance. If preferred 7-1007 can be supplied as higher power 50W LED version with a 2400 Lumen output. magnetic mount with a flying lead and cigar plug. Handheld wireless remote control for halogen version Handheld wireless remote control for LED version 7-1027 dash mount wireless remote control Halogen handheld wireless remote control searchlight - permanent mount Dimensions (mm) 190L x 155W x 130H Weight 1.2kg 7-1007-x 12V 55W Halogen searchlight 7-1007-x-24 24V 70W Halogen searchlight LED wireless remote control searchlight Dimensions (mm) 190L x 155W x 130H Weight 1.4kg 7-1150-x 12V 30W LED searchlight 7-1150-x-24 24V 30W LED searchlight -M Magnetic mount option for 7-1007 and 7-1150 - heavy duty magnet, flying lead and cigar plug LED wireless remote control searchlight Dimensions (mm) 149L x 181W x 169H Weight 1.9kg 7-1220-x 12V 50W LED searchlight 7-1220-x-24 24V 50W LED searchlight 7-1027 Dash mount wireless remote control for 7-1007/1150 or 7-1220 lights (works in addition to handheld controller supplied as standard) Black or white housings available - please specify preferred colour when ordering 29
INTERIOR LIGHTS 1 YEAR WARRANTY 4-54300 4-54100/54150/54300/54600 16, 31, 61 & 121LED lights in lengths from 100-600mm Simple surface fixing 12 or 24V versions - specify when ordering 4-6220 4-6220 rectangular LED interior light Operating temperature -20 o C to +60 o C 4W consumption 64 SMD LEDs - 140 Lumen output 12 or 24V operation Dual levels touch to select off/dim/high (last setting is memorised on switch-off) 4-6221 4-6221 rectangular LED interior light Operating temperature -20 o C to +60 o C 4W consumption 60 SMD LEDs - 140 Lumen output 12 or 24V operation Dual levels touch to select off/dim/high (last setting is memorised on switch-off) 4-7343 rectangular LED interior light 3 high output white Generation 3 LEDs Optical lens maximises light distribution Durable polycarbonate lens and base Simple surface mount with 2 wire connection 10-30V supply for 12/24 operation 0.4A current consumption@13v 4-7343 4-7612/7614 12 (304mm) Flexi-Map light mount Halogen or LED models Sliding red filter On/off/dimmer switch 12 or 24V Order Description Dimensions (mm) code 4-54100 16LED interior light* 100L x 25W x 10D 4-54150 31LED interior light* 150L x 25W x 10D 4-54300 61LED interior light* 300L x 25W x 10D 4-54600 121LED interior light* 600L x 25W x 10D 4-6220 LED interior light, 12/24V 185L x 150W x 12D 4-6221 LED interior light, 12/24V 220L x 100W x 12D 4-7343 LED interior light, 12/24V 178L x 83W x 18D 4-8031 8 diameter dual bulb dome light, 12V Add -B to product code for blue lens 4-7612-T Halogen 12 Flexi-Map light mount* 4-7614-T LED 12 Flexi-Map light mount* * Please specify 12V or 24V when ordering 4-7612/4-7614 30
CIGAR PLUG LEADS & WEATHERPROOF SWITCHES Integral fuse protection LED indication when switch is operated 3 metre lead length 3-0990 3-0999 3-1000 3-0990, 3-0995, 3-0999 and 3-1000 are switched power leads to suit a variety of applications. 3-0990 and 3-0995 have a single illuminated on/off switch. 3-0990 has a coiled lead and is fused at 8A and 3-0995 is a straight lead version that is fused at 10A 3-0999 has two separate on/off rocker switches, each with a separate LED to indicate when activated. For ease of identification, each switch has a screen printed legend and a different colour indicator LED (1 red and 1 blue). Each switch operates independently of the other 3-1000 also has two switches, one is a standard on/off rocker switch with LED indication to confirm activation, the other is a momentary switch which is ideal for functions such as flash pattern select. The momentary output is interlocked with the main output so is only available when the main output is on Both models are supplied with a 3 metre, 3-core lead (common negative output plus 2 switched positive outputs). 3-0999 and 3-1000 are suitable for operation from a 12VDC supply and have a common 8A rated fuse protecting both switched outputs; the fuse can be replaced by the user if required. Fuse Rating 3-0990 Coil lead with fused and switched plug 8A 3-0995 Straight lead with fused and LED indicator switch plug 10A 3-0999 Straight lead with fused and 2LED indicator double switch plug 8A 3-1000 Straight lead with fused and 1 on/off and 1 momentary LED indicator switched plug 8A 1 YEAR WARRANTY 12V 10A rated switches Illuminated centre switch section Available with momentary or latching operation Haztec offers a range of weatherproof switches for exterior use, such as on motorcycles, with either instantaneous (press for on/release for off) or latching switching operation (press for on/press again for off) and in a choice of amber, green or red. Switches are back-lit in the chosen colour; the backlight connections are separate to the switching contacts, allowing completely independent operation. Switches are simple to install, with push-fit connection and push-on crimp connectors. Note that, whilst switch fronts are fully weatherproof, wiring connections should be in an area that is protected from water ingress. 31 Order code Backlight colour Description 8-61105-R Red On/off weatherproof push switch, 10A 8-61105-A Amber On/off weatherproof push switch, 10A 8-61105-G Green On/off weatherproof push switch, 10A 8-61106-R Red Momentary weatherproof push switch, 10A 8-61106-A Amber Momentary weatherproof push switch, 10A 8-61106-G Green Momentary weatherproof push switch, 10A 1 YEAR WARRANTY
ILLUMINATED ROCKER SWITCHES 1 YEAR WARRANTY 12/24V 20A rated switches Choice of legends Back-lit with additional indicator to show when activated Simple to install To provide unambiguous control of warning light and siren functions, Haztec offers a range of illuminated rocker switches. Designed to fit into a standard 20mm hole, switches are simple to install with push-lock fitting and push-on connectors. They are back-lit for ease of identification and have a separate indicator to show that the switch is on. Backlights are available in a choice of colours. Switches are designed for 12 or 24V operation and are rated to switch a maximum resistive load of 20A. When ordering, please specify the required backlight colour and legend from the standard configurations shown below. Other combinations are available on request subject to minimum order quantities - please contact our sales team for information. Order code Legend Backlight colour Description 8-61100-4-B-B-01 01 Blue 20A Single pole rocker switch 8-61100-4-R-R-02 02 Red 20A Single pole rocker switch 8-61100-4-G-G-08 08 Green 20A Single pole rocker switch 8-61100-4-G-G-10 10 Green 20A Single pole rocker switch 8-61100-4-A-A-12 12 Amber 20A Single pole rocker switch 8-61100-4-B-B-12 12 Blue 20A Single pole rocker switch 8-61100-4-R-R-19 19 Red 20A Single pole rocker switch Legend 01 Legend 02 Legend 08 Legend 10 Legend 12 Legend 19 12V ROCKER SWITCHES 1 YEAR WARRANTY Heavy duty rocker switches for use on 12V systems. Available as on/off type or on/off/on 3 position type. 6-62000 allows simple fixing of individual or multiple linked switches. 8-61200 Switch on/off large rocker: red/amber, blue, green or white light, 12V Switch on/off/on large rocker: amber/amber, 8-61220 red/amber, blue/red or red/white warning (on) light, 12V 8-62000 Linking mounting panel for 8-61200 and 8-61220 6-61200 6-61220 6-62000 Multiple 6-61200 + 6-62000 linked 32
HEAVY DUTY SWITCHING UNIT 1 YEAR WARRANTY Simple surface mount fixing 6 x 10A outputs Supplied with large selection of pre-printed button labels Back-lit for ease of use 8-66000 is a simple to fix, heavy duty switching unit. External connections are by means of self-locking plug and socket connections. Each button is rated at 10A. An easily accessible, user replaceable 15A blade fuse is included for each output. Buttons illuminate red when activated, providing status indication. All buttons have latching operation (press for on, press again for off). Units are supplied with a large selection of pre-printed selfadhesive labels, allowing the installer to simply select and install the appropriate label for the required function. Each label has a separate LED backlight. 8-66000 is supplied with an installation kit, including fixing brackets, cables and connectors. The switch unit has a single, common heavy duty positive supply and six separate switched positive outputs. A separate 12V auxiliary supply is used to operate the backlighting and button status indicators. Dimensions (mm) 160L X 57H x 30D 8-66000 Dash mount switch unit - with 6 back-lit switches, LED indicators and 6 x 10A fused outputs MOTORCYCLE HANDLEBAR SWITCH 1 YEAR WARRANTY NEW Labelled sliding switch Designed to control warning lights and siren Momentary air horn button 8-87421 is designed for trouble-free installation on motorcycle handlebars. The heavy duty slide switch allows the selection of cruise, warning lights or warning lights plus siren. An additional push button allows momentary activation of the siren or airhorn. A heavy duty cable loom is included with a weatherproof connector. Order code NEW 8-87421 Description Motorcycle handlebar slide switch unit with momentary push button 33
LED FLASH CONTROL UNITS Most Haztec warning lights are supplied with integrated flash controllers offering a selection of patterns. Where a flash controller is not included, stand-alone units are available. The units below are designed for latest generation Haztec LED warning lights and offer a choice of patterns, including simultaneous and alternating options. They are also suitable for use with other LED devices that require a 12 or 24V supply for operation. With the exception of the 6-60240, all units shown on this page are supplied with plug-in connections for ease of installation and maintenance. 6-60240 6-62240 6-62400 6-62440/6-62808 Outputs LED multi-pattern flasher - up to 4 x 130mm LEDs per output 1 year warranty 6-60240-12 2 output controller, 12V 2 x 1A 6-60240-24 2 output controller, 24V 2 x 1A LED flasher - 3 year warranty 6-62240 18 selectable patterns, with high/low power and cruise modes. Runs up to 2 lights per output 2 x 5A Airport standard and flash patterns plus high/low 6-62240-A power and cruise modes 2 x 5A Flash mode is easily selected by a remote switch LED programmable flashers - 2 year warranty 12/24V. Two or more modules can be linked 8-82814 Compact switch module 4 x 10A* 8-82838 Compact switch module 8-82848 LINbus switch module 8-82858 CANbus switch module * Max 2 x 15A total per group LED lightbar controllers - 3 year warranty 8 x 10A* Supply range 10-30V (Vin = Vout) 10-30V (Vin = Vout) Zonal switching options: cruise 25% constant illumination of corners, high/low (50%) output for night-time use plus front/rear and inner/outer switching options 6-62400 16 selectable patterns, 12V 4 x 3A 6-62440 16 selectable patterns, 12V 8 x 3A 10-30V 6-62808 16 selectable patterns, 10-40V 8 x 3A 12 selectable patterns, 12V. Includes data lead 6-62812 12 x 3A 10-30V for optional Eurosmart switching (Vin = 12 selectable patterns, 12V. Includes data lead 6-62820 20 x 3A Vout) for optional Eurosmart switching Solid state halogen light or headlight flasher unit - 1 year warranty 10-30V 6-60930 5 selectable patterns 2 x 9.5A (Vin = Vout) Run-lock unit - 2 year warranty 8-82800 Run-lock control unit - plug and play operation, 10-30V interlock function. Universal model for negative (Vin = earth vehicles, 12 or 24V - please state when Vout) ordering 8-82800-CAN CANbus run-lock control unit 6-62812 6-62820 6-60930 8-82814/8-82838/8-82800 34
NEW IN 12LED dual colour warning light 13mm deep - no recesses in bodywork Built-in flasher EC65 approved 6LED and dual 4LED dash/ screen mount lights Built-in flasher Permanent mount or cigar plug connection 4-1067 has shortened visor for vertical screens 4LED warning light with integral flasher 24 patterns Synchronise with other lights Easy to install 1 13-15 8 Slim vertical mount warning light Purpose-designed optics and EC65 approved for vertical mounting Built-in flasher and synchronisation functions Now available as part of a number plate mounted warning system - ideal for covert applications Extended range of LED worklights Choice of power outputs and beam patterns 7-1020-BS designed to warn pedestrians of an approaching fork lift truck 11-12 25-26 Linear bar lights Powerful Cree LEDs - spot, flood or combinations beams Up to 25,500 Lumen output Single or double row 27 Remote control LED searchlight Self-parking for safe use High 1800 Lumen output Excellent long and short range beams Motorcycle handlebar switch Slide switch control of warning lights and siren Momentary air horn button 33 28 WWW.HAZTEC.UK Haztec International Limited Moorfield Estate, Leeds LS19 7BN, England T: +44 (0)113 202 9115 F: +44 (0)113 202 9158 E mail: info@haztec.uk - www.haztec.uk V10