Fall Savings! ROCKWELL HARDNESS TESTER PACKAGES Valid: From October 2nd to December 22nd 2018 Prices Subject to Change without Notice & Stock Availability. Some items may not be exactly as shown 13% Without Trade In 26% With Trade In HR-32OMS Order No. 963-231-10A Without Trade In With Trade In $9,454.33 $8,125.00 HUGE SAVINGS! HR-430MR Order No. 963-240-10A Without Trade In With Trade In $9,735.58 $8,450.00 HR-430MS Order No. 963-241-10A Without Trade In With Trade In $10,817.31 $9,700.00 FOB MISSISSAUGA FOB MISSISSAUGA FOB MISSISSAUGA The frame design allows the full 7.1 of specimen capacity without the need to cut a hole in the table. *HR320 uses a flashing bar graph to indicate when the initial test force has been reached The frame design allows the full 7.1 of specimen capacity without the need to cut a hole in the table. *HR430 has an automatic brake and automatic start function that prevent overloading and begins test cycle The frame design allows the full 7.1 of specimen capacity without the need to cut a hole in the table. All models are complete with Flat and V-anvil, dimond and 1/16 carbide ball indenters
DEPTH MICROMETER Ø4mm interchangeable rods, with lapped measuring end, provides a wide measuring range With ratchet stop for constant force With measuring rod clamp DIGIMATIC MICROMETERS A nonslip surface with raised dots is employed for the frame cover and surface panel to achieve stable handheld measurement *Without SPC data 293-348-30 * 293-336-30 comes with standard bar and a certification of inspection is included Base size $ 329-350-30 0-6 /0-152.4mm 4 x63 203242 $538.30 $152.00 Digital model with carbon tip Pointed spindle and anvil for measuring the web thickness of drills, small grooves, keyways, and other hard-to-reach dimensions. 15 degree measurement point Non-slip grip finish With ratchet stop for constant force Supplied in fitted case $ 293-348-30 0-1 /0-25.4mm 303989 $169.87 293-335-30 0-1 /0-25.4mm.00005 / 300805 $217.43 0.001mm 293-336-30 1-2 /25.4-50.8mm 290797 $255.94 Provided only with zero set and in/mm models only keys. A ratchet stop or friction thimble for a constant measuring force Measurement readout with large characters on the LCD Supplied in fitted case $ 342-351-30 0-1 /0-25.4mm.00005 /0.001mm 224673 $418.26 The input tool allows you to connect any Mitutoyo gauge, with SPC output, directly to your PC INPUT TOOL, USB $ 293-831-30 0-1 /0-25.4mm 215941 $129.41.00005 /0.001mm 293-832-30 0-1 /0-25.4mm 151704 $133.31 264-016-10 PC Requirements PC Compatability (including laptops) with USB 2.0 OR 1.1 port $ 311802 $184.76
Satin chrome-finished frame, tapered (on the anvil side) for hard to reach places MECHANICAL MICROMETERS Hammerstone, baked-enamel-finished frame Ratchet stop or friction thimble for exact repetitive readings With Standard bar $ 101-113 0-1.0001 35235 $116.27 The anvil and the spindle have a blade for measuring groove diameter of shafts, keyways and hard-to-reach-areas. With ratchet stop for constant force With standard bar except 0-1 model Set 103-929 0-3 103-177,103-178,103-179 35343 $354.84 $166.00 Mechanical digit counter for quick and error-free reading. *Both vernier micrometers can obtaine a.0001 reading $ Remark $ 122-125 0-1 35433 $257.45.0001 Type A 122-126 1-2 35434 $265.75 $ 193-211 * 35740 $158.26 0-1.0001 193-212 * 35741 $178.93 Used for the zero point setting of outside micrometers Flat and lapped measuring faces Heat insulating handles to prevent expansion due to body temperature Supplied in fitted carton STANDARD MICROMETER S-F: Spherical anvil and flat spindle Designed to measure the wall thickness of various tubing With digit counter * is for the Indicator only Length Diameter (D) $ 167-141 1 55266 $18.87 167-142 2.25 57887 $19.63 $25.00 167-143 3 55267 $23.40 Remark $ 295-153 0-1.0001 (D).40 64626 $195.54
DIAL STANDARD Unique shock-proof mechanism provides improved immunity to shock due to sudden spindle retraction caused by high impact The crystal is hard coated for durability and scratch resistence Approximately 40% lighter than a conventional dial indicator Improved resistance to shop-floor contaminants such as water and dust Due to spindle bushing being offset from the stem, spindle movement will not be hindered or jammed when clamping along the stem. * Shockproof and jeweled bearing type 2803SB-10 & 2923S-10 * Reverse reading type 2904S & 2923S-10 DIAL TEST INDICATORS Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access. No-clutch structure for automatic reversal of measurement direction One-piece bezel and crystal design with O-ring provides resistance to water and dust High sensitivity and quick response because of jeweled bearings Standard carbide contact point provided * 513-414-10E double scale spacing and long contact point type Dial 2776S 1.0005 0-50 113881 $113.04 2904S 1.001 100-0 140654 $112.49 2803SB-10 *.025 0-5-0 234495 $144.96.0001 2923S-10.05 0-5-1 194320 $144.96 DIAL STANDARD Standard one revolution type for errorfree reading *Shockproof and jeweled bearing type. 2901SB-10 0.16mm/0.2mm 0.001mm 80-0-80 2901SB-10 + $164.58 Dial * is for the Indicator only Dial 513-401-10E 0.14mm 0.001mm 0-70-0 513-401-10E + $200.07 513-402-10E.03.0005 0-15-0 304881 $107.58 513-404-10T 0.8mm 0-40-0 513-404-10T + $140.43 0.01mm 513-414-10E 0.5mm 0-25-0 315575 $146.47 Horizontal, vertical and parallel series Anti magnetic and jeweled bearing type *513-445-10T long contact point type Includes dial test indicator and mini magentic stand (inch model) *Dial test indicator is antimagnetic and jewled bearing type Set 513-907-10E * 513-402, 7014E-10 Remarks Without magnetic on/off 306782 $194.78 * is for the Indicator only Dial 513-445-10T 0.4mm 0.002mm 0-100-00 513-445-10T + $240.08 513-453-10T.008.0001 0-4-0 316724 $200.82
DIAL COMPACT With lug back *Shockproof and Jewledge bearing type only with 1109SB-10 Dial 1109SB-10 1mm 0.001mm 0-100-0 1109SB-10 + $178.93 1411S.25.001 0-50-0 36318 $93.62 DIGIMATIC INDICATORS Similar in size to Series 2 dial indicators Large, easy to read LCD Go/no-go judgement can be performed by setting upper and lower tolerance limits The positive/negative count resulting from the spindle s up/down movement can be toggled. ID-C indicator face can be rotated 330 to an appropriate angle for easy reading EDGE FINDER The Edge Finders are hardened and ground on all surfaces 543-392.00005 /0.001mm 123542 $397.59.5 /12.7mm 543-402B.0005 /0.01mm 132695 $290.01 Shank Diameter 050109.50 219979 $12.83 1/2 (.50 ) 050110.20,.50 210908 $15.10 Thickness gauges offer a quick and efficient means of inspection with a convenient grip handle With a thumb trigger and spring loaded spindle Fine dial reading, ceramic spindle/anvil Tip A simple, small magnification device used to see small details more closely Contained in an opaque cylinder or cone or fold into an enclosing housing that protects the lenses when not in use. Magnification Remarks CLEAR LOUPE 183-302 10X Drawtube Removable 35668 $28.0 7326S 0-.05.0001 36477 $200.07 $51.00
DIGIMATIC ENCODER TECHNOLOGY CALIPER Electronic calipers, keeps track of origin point once it is set Large and clear LCD Readout Carbide-tipped jaw-type *500-505-10 without thumbroller 500-174-30 0-6 /0-150mm 500-174-30 + $317.09 500-175-30 0-6 /150mm 500-175-30 + $338.98 0.05mm/1/128 500-505-10 0-18 /0-450mm 120377 $742.14 MECHANICAL VERNIER Measures OD, ID depth, and steps. Lock screw for holding the sliding jaw position Suppled in vinyl holster in fitted carton * Dual reading scales and graduation of 0.02mm 530-118 $89.00 The slider moves only when the spring loaded thumb clamp is depressed Can measure OD, ID, depth and steps Supplied in vinyl holster in fitted carton 530-104 0-150mm/0-6 119337 $68.70 530-105 0-6 0.05mm/1/128 66990 $74.74 531-128 0-150mm/0-6 36242 $87.58 0.02mm/.001 531-129 0-200mm/0-8 36243 $103.43 $51.00 530-116 0-8 36234 $112.49 530-118 0-200mm/0-8 0.02mm/.001 36235 $104.47 CARBON FIBER DIGIMATIC CALIPER Lightweight Highly durable and easy to handle The range of application can be expanded by using the optional attachements Direct readout of ID measurements from the LCD $51.00 552-313-10 -(.5 )-24.0005 /0.01mm 237921 $960.33 $114.00 DIGIMATIC SOLAR CALIPER A measurement can be started at any time and without restrictions on operating speed. Eco-friendly solar-powered caliper requires no battery Supplied in a fitted case *without SPC data output 500-785 0-8 /0-200mm.0005 /0.01mm 207760 $277.08
BORE GAUGES Carbide-contact points for durability Optional extension rods can be attached for measuring deep holes * Indicator sold seperately, contact us for recommendation Measure ID at position close to the bottom of blind hole Carbide-contact point ensures high durability and wear resistance Grip is large and hollow to reduce effect of body heat on highaccuracy measurements 511-731.7-1.4 9 263606 $236.31 PITCH GAUGE SET Thread pitch size is stamped on each gauge Metric, Unified, and Whitworth screw pitch gauge 188-111 4-42 TPI 30 35701 $30.40 188-121 0.4-7 mm 18 35702 $25.73 188-122 0.4-7 mm 21 35703 $30.95 188-151 0.4-7mm/4-42 TPI 51 35704 $56.91 LINEAR GAUGE COUNTER Compact panel mounting type and DIN size. Can be easily incorporated into each system No.of Anvils Leaves Per Set No.of Anvils 511-438.6-1.4 11.4 sub anvils 305079 $505.83.0001 $89.00 511-440 2-6 11.2 sub anvils 511-440 + $548.11 GAUGE BLOCKS All Mitutoyo gauge blocks meet or exceed all know specifications. Flatness, parallelism and surface finish necessary to achieve the required accuracies are the same as or better than government requirements Block Per Set Grade 516-902-26 81 0 113661 $1,784.76 $329.00 STANDARD GAUGES Made of high quality steel Satin chrome finish Application Input 542-007A LGD, LGS, ID,SD, Digimatic code (SPD) 198468 $327.66 Specification 950-202 American Standard Wire Gauge 87941 $35.48 0-36 950-203 US Standard Wire Gauge 68936 $35.48
STEEL RULERS FLEXIBLE WIDE Clear graduation on stain-chrome finish Stainless tempered Size 182-208 6 x150mm 1/10,1/50,1mm,0mm 35618 $19.49 182-211 150mm 1mm,0.5mm,1mm,0.5mm 35619 $19.63 FALL SAVINGS $51.00 DIGITAL PROTRACTORS Machined aluminum frame Alternate reference (zero) Reading hold Simple calibration requiring no special fixtures Supplied in fitted case Display remains upright to view at all angles *950-317 Pro 360 model RS232C output *950-318 Pro 3600 model SEMI-FLEXIBLE Engraved on frontside only Size 182-302 6 x150mm 1/2mm,1mm,1/32,1/64,1/16 35640 $15.85 $51.00 182-305 12 x300mm 1/2mm,1mm,1/32,1/64,1/16 35642 $32.46 $101.00 DIGIMATIC HEIGHT GAUGE Switchable resolution and easy-to-use standard type Carbide-tipped scriber is provided Double-column structure ensures high measuring accuracy Coarse/fine feed switching Two preset reference heights 950-317 0.1 256487 $271.30 360 (90 x4) 360 (90 x4) 950-318 0.01 (0 to 9.99 ) / 0.1 (10 to 90 ) UNIVERSAL PROTRACTOR Data output function makes it easy to use the statistical data. Can be attached to height gauges. Setting preset value Blade POCKET Engraved on both sides 256488 $434.11 187-552 12 1 (0.01 ) 216713 $1,096.22 192-630-10 0-12 /0-300mm.0005 (0.01mm) [.0002 (0.005mm)] Switchable 132139 $1,121.89 $114.00 Size 950-300 6 x150mm 1mm, 1/64 64411 $9.36 $51.00
Minimum Purchase One AT715 Linear Scale & One KA-200 Counter (2or 3 axis) Effective BUILD YOUR OWN DIGITAL READOUT PACKAGE Code 539-801 4 /100mm 194775 $303.63 $288.45 539-802 6 /150mm 210609 $303.63 $288.45 539-803 8 /200mm 181217 $306.91 $291.57 539-804 10 /250mm 194119 $306.91 $291.57 539-805 12 /300mm 184151 $306.91 $291.57 539-806 14 /350mm 193574 $310.20 $294.69 539-807 16 /400mm 183638 $314.30 $298.58 539-808 18 /450mm 187084 $320.04 $304.04 539-809 20 /500mm 184148 $323.33 $307.16 539-811 24 /600mm 192148 $329.07 $312.62 174-183A KA-200 Counter (2-axis) 297345 $602.34 $572.22 174-185A KA-200 Counter (3-axis) 297346 $886.28 $841.96 your choice Description 1pc. Linerar Scale Withought With Minumum Purchase Minumum Purchase Withought With Minumum Purchase Minumum Purchase 25% KA-200 Digital Counter > Excellent addition to manual machine retrofit packages > Many high end functions packed into this standard counter > Large LED display is sharp and bright. Easy to see at a distance > The positive touch front panel keys are solid and easy to push with fast response > The sub display lets you know what function you are currently using with minimum on most items* 539-813 28 /700mm 195311 $335.64 $318.85 539-814 30 /750mm 185033 $340.56 $323.53 539-815 32 /800mm 194698 $343.02 $325.87 539-816 36 /900mm 184140 $374.21 $355.49 539-817 40 /1000mm 187083 $388.98 $369.53 539-818 44 /1100mm 210611 $441.50 $419.42 539-819 48 /1200mm 193790 $494.84 $470.10 539-820 52 /1300mm 210613 $549.00 $521.55 539-821 56 /1400mm 195310 $599.88 $569.88 539-822 60 /1500mm 189454 $665.53 $632.25 18% with minimum on most items* 539-823 64 /1600mm 210614 $745.95 $708.65 539-824 68 /1700mm 196934 $823.91 $782.71 539-825 72 /1800mm 193500 $902.69 $857.55 539-860 80 /2000mm 260282 $1,374.55 $1,305.82 539-861 88 /2200mm 273534 $1,467.28 $1,393.91 639-862 96 /2400mm 539-862 + $1,764.34 $1,676.13 Brackets Description 64AAB196 Universal bracket kit (12 ) 291933 $219.11 64AAB197 Universal bracket kit (14-16 ) 274267 $225.67 Milling System 64AAB198 System Universal bracket kit 64AAB198 + $243.73 64AAB199 Screw kit 64AAB199 + $185.46 539-863 100 /2500mm 304834 $1,805.38 $1,715.11 539-864 104 /2600mm 539-864 + $1,846.41 $1,754.09 539-865 112 /2800mm 539-865 + $1,969.50 $1,871.03 539-866 120 /3000mm 254494 $2,195.17 $2,085.41 64AAB191 Lathes Bracket kit 2363783 $265.88 64AAB194 Grinders Scale Y axis 64AAB194 + $370.10 64AAB200 All Systems Machine arm kit (KA Counter 274166 $185.46
The portable solution for precise, effective and uncomplicated surface testing in the production environment High-resolution detector with broad measuring range Removeable traverse unit for measurements where space is restricted Standard USB, RS232C. SPC interfaces SURFTEST SJ-210 Order No. 178-561-02A A.C.T. No 164965 FLYER SPECIAL $2,588.95 26% on most items 5.7 colour LCD 10 different measurement conditions can be stored internally, up to 500 with optional SD card SURFTEST SJ-310 Order No. 178-571-02A A.C.T. No. 268976 FLYER SPECIAL $3,948.85 SURFTEST SERIES 5.7 colour LCD Analysis of primary profile, roughness profile, filtered waviness *Contact us for calibration pricing SJ-400 COLUMN STAND Order No. 178-039 A.C.T. No. 193184 $686.86 Size Height SURFTEST SJ-411 Order No. 178-581-02A A.C.T. No. 274984 FLYER SPECIAL $7,376.54 Natural granite - free from dimensional change Superior to cast iron plates Free from wringing, burrs or protrusions High degree of flatness for longevity Meets & exceeds GGG-P-463c Each shipped with certification of accuracy Weight (lbs) OPTIONAL ACCESSORY PROMO AUTO-SET UNIT FOR 178-039 Order No. 178-010 A.C.T. No. 178-010 + $3,515.27 Accuracy Grade $ 517-708 24 x 36 6 600 85 µin AA 170568 $1,062.05 517-714 36 x 48 8 1500 150 µin Labroratory 161037 $2,167.68 517-801 9 x 12 3 40 100 µin 150547 $144.02 517-802 12 x 12 3 50 100 µin 126973 $177.26 517-803 12 x 18 4 100 100 µin 109629 $226.74 517-805 18 x 24 4 200 130 µin A Inspection 166780 $442.40 517-808 24 x 36 5 500 170 µin 127257 $841.96 517-814 36 x 48 6 1200 300 µin 163761 $1,770.33 517-819 48 x 72 10 3800 600 µin 170569 $4,394.45 Top quality ceramic axis Measuring head can swivle 90 for transverse measurement Analysis of primary profile, roughness profile, filtered waviness and geometric characteristics SURFTEST SJ-500 Order No. 178-533-02A A.C.T. No. 178-533-02A + FLYER SPECIAL $12,877.50 Steel stands support black granite surface plates at working level GRANITE SURFACE PLATES & STANDS Size Specification $ 517-950 12 x18 Stationary 517-950 + $1,034.93 517-950-1 12 x 18 With Caster 517-950-1 + $1,108.79 517-952 18 x 24 Stationary 114574 $1,139.09 517-952-1 18 x 24 With Caster 517-952-1 + $1,423.15 517-956 24 x 36 Stationary 135292 $1,389.07 517-956-1 24 x36 With Caster 152369 $1,527.31 517-964 36 x 48 Stationary 73810 $1,475.33 517-964-1 36 x 48 With Caster 517-964-1 + $1,759.29 517-969 48 x 72 Stationary 193261 $1,721.42 517-969-1 48 x 72 With Caster 517-969-1 + $2,296.17
Valid: October 2nd to December 22nd CIAL PE ER S E PRI8C8.95 $ 2,5 SUP $2,588.95
View We reserve the right to change prices and specifications without notice. ny other offer or promotion. This promotion is for Canadian market only. Request formal quotation for complete details.