Klöber Orbit Design: Eckhard Hansen, Gerhard Reichert Thanks to the elastic, anatomically shaped backrest frame, sitting in Orbit feels like sitting on a water-bed. For the manager s office or the front office.
Klöber Orbit Basic specification charge (Further functions and equipment features on the next page) Swivel chairs Function Point-synchronised mechanism with automatic weight adjustment. Dynamic movement thanks to optimum synchronous control of the seat and backrest with tilt ratio 1:2.7. Backrest tilt angle 2. Body weight adjustment Automatic adjustment to the user's body weight 0-100 kg. Additional fine adjustment of spring resistance for strong or weak counterpressure. Synchronised locking Synchro mechanism lockable in any seat position with new, user-friendly Ergoklick lever. Backrest moves gently forward when the lock is released. Seat tilt Seat surface tilt 0 (opening angle 2 ). Seat height adjustment Adjustment range 40-1 cm. Top release safety gas lift with gas lift cover. Seat Clip-on upholstery; 0 mm CFC-free PU foam cushion. Moulded foam with ergonomic contour for optimum support. Density kg/m³. Backrest Backrest frame in fibreglass-reinforced plastic. Dual component injection moulded soft, elastic membrane made of TPE plastic as base for 1 mm padding, cm high. Moulded foam with ergonomic contour and back membrane for optimum support of contact points. Foam density kg/m³. Headrest For model orb. Tiltable and can be rotated by 30. Available in Laif black for fabric upholstery or in for upholstery (same colour). Castors Load-dependent braked double castors, black plastic, hard castors Ø mm for carpets. Standards / certificates GS mark from State Trading Standards Authority Nuremberg DIN EN 133 Ergonomics certificate (ergonomics approved) from the State Trading Standards. Authority Nuremberg, ANSI/BIFMA X.1 Warranty years (see terms and conditions of sale and delivery). Conference cantilever chair Frame Oval tube 3 x 1 mm, not stackable. Suitable for up to 12 kg body weight. Seat 0 mm CFC-free PU foam cushion. Moulded foam with ergonomic contour for optimum support. Density kg/m³. Backrest 4 cm high, steel frame. Mesh membrane with moulded foam and upholstery for optimum pressure distribution. Foam density kg/m³. Armrests With finish. Warranty years (see terms and conditions of sale and delivery). Dimensions 48 42 + 48 42 + 104-11 7-78 40-1 104-11 7-78 40-1 13-21 70 orb + 34 With Armrests: orb - 2 kg Without Armrests: orb - 22 kg 70 orb8 + 34 With Armrests: orb8-24 kg Without Armrests: orb8-20 kg orb With Armrests: orb - 13 kg Fabric requirement orb orb8 orb Same colour: 1,2 x 1,30 m; Different colours: seat: 0,70 x 1,30 m; backrest: 0,70 x 1,30 m; Headrest: 0, x 1,30 m Same colour: 1,2 x 1,30 m; Different colours: seat: 0,70 x 1,30 m; backrest: 0,70 x 1,30 m Same colour: 1,2 x 1,30 m; Different colours: seat: 0,0 x 1,30 m; backrest: 080 x 1,30 m requirement on request
Klöber Orbit orb Swivel chairs orb8 Option Description Code orb orb8 Armrests Without armrests 300 Z armrest black 33 with finish 373 Armrest bar black 34 black with finish 374 polished 3 polished with finish 37 4F Arm Supports black 37 black with finish 377 alu-coloured 38 alu-coloured with finish 378 polished 3 polished with finish 37 MF Arm Supports black 37 alu-coloured 38 polished 3 Backrest bar colour Aluminium black 3801 alu-coloured 3802 Mechanism colour Aluminium black 3701 alu-coloured 3702 Base colour Aluminium black 3201 alu-coloured 3202 polished 3203 Castors / glides Hard castors Ø mm, for carpets 3103 Soft castors Ø mm, for hard floors 3104 Base glides (only in conjunction with auto-return mechanism) 310 Base glides with felt fixed (only in conjunction with auto-return mechanism) 311 Seat height 40-1 cm 3300 40-1 cm with additional mechanical spring 3301 4-0 cm 3302 42-4 cm with auto-return mechanism (only in conjunction with 310, 311) Further characteristics seat depth adjustment / sliding seat (seat can be adjusted by cm towards the front) 3330 3420 Adjustable seat tilt (0 / -3 ) 3422 Seat with box spring core 37 Air Support lumbar support (air support integrated into the backrest upholstery, height adjustable by cm) 3817 Seat and backrest upholstered in different colours P001 Headrest in (for model in fabric) PK08 - Klöber presentation cover for sample chairs 001
Klöber Orbit orb Conference cantilever chair Option Description Code orb Armrests finish 320 Frame colour black 321 alu-coloured 322 bright chrome-plated 323 Further characteristics Seat and backrest upholstered in different colours P001 Glides for hard floors 317 Felted skids 318 Klöber presentation cover for sample chairs 001
Design: Eckhard Hansen, Gerhard Reichert Orbit Network features a new approach to form. Its light and transparent Softnet backrest adapts to the individual user. Ideal for the front or back office.
Basic specification charge (Further functions and equipment features on the next page) Swivel chairs Function Point-synchronised mechanism with automatic weight adjustment. Dynamic movement thanks to optimum synchronous control of the seat and backrest with tilt ratio 1:2,7. Backrest tilt angle 2. Body weight adjustment Automatic adjustment to the user's body weight 0-100 kg. Additional fine adjustment of spring resistance for strong or weak counterpressure. Synchronised locking Synchro mechanism lockable in any seat position with new, user-friendly Ergoklick lever. Backrest moves gently forward when the lock is released. Seat tilt Seat surface tilt 0 (opening angle 2 ). Seat height adjustment Adjustment range 40-1 cm. Top release safety gas lift with gas lift cover. Seat Clip-on upholstery; 0 mm CFC-free PU foam cushion. Moulded foam with ergonomic contour for optimum support. Density kg/m³. Backrest cm high, backrest frame in fibreglass-reinforced plastic with black mesh membrane covering. Mesh membrane for optimum pressure distribution. Grabhole in backrest for transport. Headrest For model orb8. Tiltable and can be rotated by 30. Available in Laif black for fabric upholstery or in for upholstery (same colour). Castors Load-dependent braked double castors, black plastic, hard castors (Ø mm) for carpets. Standards / certificates GS mark from State Trading Standards Authority Nuremberg DIN EN 133.Ergonomics certificate (ergonomics approved) from the State Trading Standards. Authority Nuremberg, ANSI/BIFMA X.1. Warranty years (see terms and conditions of sale and delivery). Conference cantilever chair / Conference-Swivel chair Frame Conference cantilever chair: Cantilever frame, tubular Ø 2 mm, not stackable. Suitable for up to 12 kg body weight. Conference-Swivel chair: Cantilever frame, tubular Ø 2 mm, not stackable. Aluminium 4-star base, polished with glides. Suitable for up to 12 kg body weight. Seat 0 mm CFC-free PU foam cushion. Moulded foam with ergonomic contour for optimum support. Density kg/m³. Backrest 4 cm high backrest frame in fibreglass-reinforced plastic with black mesh membrane covering. Mesh membrane for optimum pressure distribution. Grabhole in backrest for transport. Armrests Plastic finish, black. Standards / certificates GS mark from State Trading Standards, Authority Nuremberg / DIN EN 1371. Warranty years (see terms and conditions of sale and delivery). Dimensions orb8 + 34 With Armrests: orb8-24 kg Without Armrests: orb8-22 kg orb88 + 34 With Armrests: orb88-22 kg Without Armrests: orb88-20 kg orb4 With Armrests: orb4 - kg orb80 With Armrests: orb80-12 kg Fabric requirement orb8 orb88 orb4 orb80 Seat: 0,70 x 1,30 m; Headrest: 0, x 1,30 m Seat: 0,70 x 1,30 m Seat: 0,0 x 1,30 m Seat: 0,0 x 1,30 m requirement on request
orb8 Swivel chairs orb88 Option Description Code orb8 orb88 Armrests Without armrests 300 Z armrest black 33 with finish 373 Armrest bar black 34 black with finish 374 polished 3 polished with finish 37 4F Arm Supports black 37 black with finish 377 alu-coloured 38 alu-coloured with finish 378 polished 3 polished with finish 37 MF Arm Supports black 37 alu-coloured 38 polished 3 Backrest bar colour Aluminium black 3801 alu-coloured 3802 Mechanism colour Aluminium black 3701 alu-coloured 3702 Base colour Aluminium black 3201 alu-coloured 3202 polished 3203 Castors / glides Hard castors Ø mm, for carpets 3103 Soft castors Ø mm, for hard floors 3104 Base glides (only in conjunction with auto-return mechanism) 310 Base glides with felt fixed (only in conjunction with auto-return mechanism) 311 Seat height 40-1 cm 3300 40-1 cm with additional mechanical spring 3301 4-0 cm 3302 42-4 cm with auto-return mechanism (only in conjunction with 310, 311) Further characteristics seat depth adjustment / sliding seat (seat can be adjusted by cm towards the front) 3330 3420 Adjustable seat tilt (0 / -3 ) 3422 Seat with box spring core 37 lordosis support (can be integrated into backrest, height adjustable by cm) 3817 Headrest in (for model in fabric) PK08 - Klöber presentation cover for sample chairs 001
orb4 Option Description Code orb4 Armrests Plastic finish, black 310 finish 320 Armrest in natural maple 304 Frame colour black 321 alu-coloured 322 bright chrome-plated 323 Further characteristics Stackable (1 + 4) 304 Row-linking devices 0013 Conference cantilever chair Glides for hard floors 317 Felted skids 318 Klöber presentation cover for sample chairs 001
orb80 Option Description Code orb80 Armrests Plastic finish, black 310 finish 320 Frame colour bright chrome-plated 323 Base colour Aluminium polished, 4-star 3233 Castors / glides Conference-Swivel chair bright chrome plated, 4-star 323 polished 3203 hard castors Ø mm, for carpet (not possible in conjunction with auto-return mechanism and 3233,323) soft castors Ø mm, for hard floors (not possible in conjunction with auto-return mechanism and 3233,323) chromed hard castors Ø 0 mm, for carpets (not possible in conjunction with auto-return mechanism and 3233, 323) chromed sorft castors Ø 0 mm, for hard floors (not possible in conjunction with auto-return mechanism and 3233,323) 3103 3104 3111 3112 Base glides (only in conjunction with auto-return mechanism) 310 Base glides with felt fixed (only in conjunction with auto-return mechanism) 311 Further characteristics Klöber presentation cover for sample chairs 001