2016 Mule 600 2x4 Small, Versatile and Capable The Mule 600 is a highly versatile vehicle for use in a variety of situations and for a variety of tasks. From the worksite to the golf course, when you need speed, manoeuvrability and the ability to get you and your equipment in and out with a minimum of fuss, the Mule 600 is the ideal vehicle. And you can rest easily with the knowledge that the 600?s low weight and low ground-pressure tyres avoid damage to sensitive areas such as golf fairways, parkland or recreation areas. * Terms & Conditions Available from Kawasaki Mule / Teryx Dealerships - Click to find a dealership Engine Type Air-cooled, 4-stroke Single, OHV Displacement 401 cm³ Bore and Stroke 82 x 76 mm Compression ratio 8.3:1 Fuel system Carburettor: Nikki 6C1026 Ignition Magneto & transistor Starting Electric Lubrication Forced lubrication, wet sump Drivetrain Transmission Constantly variable transmission (CVT) with reverse Primary drive Belt converter Final drive Gear (KAF400A: Selectable 2WD/4WD),Dual-Mode differential Primary reduction ratio 3.653 ~ 0.794 (belt converter) Gear ratios: Forward (High) 2.916 (35/24 x 36/18) Forward (Low) (KAF400A only) 4.315 (41/19 x 36/18) Reverse (Low) 3.750 (30/16 x 36/18) Final reduction ratio 2.866 (43/15) Frame Type Ladder type, tubular steel Suspension: front Independent, MacPherson strut rear Unit swing, dual shocks front 78 mm rear 78.7 mm front 22x9-10 Tubeless rear 22x11-10 Tubeless Wheel travel: Tyre: Caster (rake) 8 Trail 22x11-10 T/L Steering angle (left, right) 43 (IN) / 38 (OUT), 43 (IN) / 38 (OUT) Colour Dark Royal Red Brakes
Front brakes 165mm dual hydraulic drum brakes Rear brake 165mm dual hydraulic drum brakes Parking brake Mechanical drum Dimensions Overall length 2,720 mm verall width 1,335 mm Overall height 1,781 mm Wheelbase 1,779 mm Ground clearance 155 mm Seat height 768 mm Curb mass 432 kg Fuel capacity 15.5 litres Performance Maximum power 9.2 kw {12.5 PS}/ 3,800 rpm Maximum torque 27.9 N m {2.8 kgf m}/ 2,200 rpm Minimum turning radius 3.3 mm Cargo bed load capacity 181 kg Cargo box (inside) L x W x H 1,044 mm x 900 mm x 245 mm Seating capacity 2 Maximum permissible load 420 kg (including occupants and cargo) Maximum towing capacity 500 kg (includes trailer and load) Warranty 3 year warranty? Terms & Conditions Apply? Discuss with a Kawasaki Dealer? The specifications mentioned here apply to and have been achieved by production models under standard operating conditions. We intend only to give a fair description of the vehicle and its performance capabilities but these specifications may not apply to every machine supplied for sale. Kawasaki Heavy Industries, Ltd. reserves the right to alter specifications without prior notice. Equipment illustrated and specifications may vary to meet individual markets.
Automatic Transmission Smooth, Reliable Power The belt-driven, Continuously Variable Transmission The Mule 600 2x4 is powered by a spritely 401cc, (CVT) seamlessly adjusts to provide optimum gearing four-stroke, OHV, air-cooled engine. Compact, at all times. The inclusion of high and low ranges plus lightweight and durable, the engine has evolved from a reverse gear ensure maximum flexibility and Kawasaki?s long line of agricultural ATVs and is usability. continues their heritage of extreme reliability. Impressive Carrying Capacity The Mule?s 1,044mm x 900mm x 245mm cargo tray holds a sizable 181kg and features and easy-opening tailgate system. The front hood also opens to reveal a capacious 48L sealed storage area. Compact Dimensions Like its Mule 610 4x4 sibling, the Mule 600?s compact dimensions allow it to easily fit in the back of a mid-sized pickup truck. Its track measures 1,051 mm (front) and 999 mm (rear) with a wheelbase of 1,779 mm. Stylish Bodywork Classy styling gives the MULE 600 a more voluminous appearance. Its curved surfaces and lines contributing to a high-class design with a high-quality finish that looks right at home at the family campsite or out on the fairway. Dual-Mode Rear Differential A dual-mode rear differential enables locking for maximum traction in slippery situations and unlocking for tight turning circles and minimal impact on soft or sensitive surfaces. ROPS Approved and Safe Operation The Mule 600 is ROPS approved and fitted with 2 seat belts. The Mule 600 is governed to limit the top speed. Always wear a helmet and seat belts at all times.
Accessories for KAF400BGF 2016 MULE 600 (2678) CASE HOLDER FLOOR MAT GRAB RAILS (SET OF 2) * Folds to flat "box" shape, out of way * Adjustable top opening * Platform bottom with spill tray * Screw mounted Tough resilient rubber protects feet and Mule floorboards. Reduces sound levels and has Mule logo in the centre of the mat. * Make it easy to enter and exit, especially with windshields or cabs installed * Heavy-duty "soft-radius" plastic handles GUARD BRUSH GUARD TAIL LIGHT GUARDS FRONT C/V GUARDS HEADLIGHT Large diameter steel tubing protects vehicle * Integrated front skid plate * Mounts easily * Steel construction * Protects tail light from accidental damage * Mounts in original holes in bed * While stocks last Guards - Front C/V Joint, Black. Protects drive shaft boots from damage. Steel plate construction. * Protects headlights from damage * Improves appearance * While stocks last GUN BOOT IV HARD TOP BLACK LINER REG BED MAT BED LINER BLACK * Rugged polyethylene shell with plush pile lining will keep your gun protected and secure * Accommodates left & right hand bolts * Accepts 50mm scopes * Use with the Gun Boot IV mounts only * Shaped to compliment vehicle design * Simi-Rigid colour impregnated plastic * No special supports needed * Hardware to fit supplied * Use alone or with windshield * NOTE: Must be removed for transport on open trailer or truck * Made with the same design and materials as those made for pickup trucks * Divider notches to use 2" x 6" to compartment bed * Matching cover for tailgate * Stainless Steel mounting hardware * Rubber bed mat protects cargo and MULE bed surface * 5/16" Extra thick flexible rubber * Prevents cargo from sliding * Reduces sound levels * MULE logo in the centre of each mat * Rifle case holder fits ATV100-004 rifle case (not included) * Will not work with bed gates, tool holders, other bed side accessories * Fits either side of bed DRINK HOLDER WITH MOUNT MOTO MINDER HOUR METER REPL HARD TOP FITTING KIT REVERSE BEEPER KIT SKID PLATE MAIN MIDDLE
* MM is an engine hour meter specifically * Hard top replacement fittings Mountings designed for use in the harsh only environment of motocross racing As such, it will operate reliably in a number of other applications * - Motorcycles - MM has been specifically designed for motocross racing * It is also useful for tarmac race bikes, ATVs, enduro bikes, karts etc * Note: MM will operate on the new generation "pencil coil" ignitions * Marine - MM is fully spec'd for saltwater marine use * Applications include outboard motors, jet skis and other recreational and race craft * MM has a dual purpose input circuit * This means that the red sense wire can be cable tied along a sparkplug HT lead (Inductive Connection) OR it can be connected directly into a voltage supply (Direct Connection) * Automatically activates loud beep sound when shifted to reverse * Easy installation with new plunger switch * Switch (13151-1080) and Washer (92065-058) are required for installation (sold separately) BLACK SKID PLATE SUB MIDDLE SOFT TOP SPRING HEAVY DUTY REAR STORAGE BIN - UNDERSEAT Adds coverage for swing arm pivots. Steel plate construction. This kit contains the sub skid plate only and cannot be installed alone. It is supplemental to the Main Skid Plate, KAF600008 and must be installed at the same time, using the hardware supplied with the Main Skid Plate. * Durable, weatherproof 18 oz fibre reinforced PVC laminate material * Installs easily with adjustable straps * Includes fibreglass support rod to shape peak * Use alone or with windshield * NOTE: Must be removed for transport on open trailer or truck COIL SPRINGS REPLACE STANDARD REAR SPRING. RECOMMENDED FOR UNITS WITH CAB INSTALLED.ORDER 2 PER VEHICLE. Large storage bin fits under passenger side of seat. Lift seat bottom for access. Approximately 13 litres volume. TOP SOFT REPL ROD N CLAMP TRAILER HITCH TRAILER HITCH BALL TURF TIRE * Attaches to rear cross member * Load rating determined by vehicle tow rating 2" Chrome plated trailer hitch ball. Includes nut and lock washer. 3/4"diameter shank. 1&1/2" shank length. When used with Hitch Ball Mount KAF138 (for Mule) or TX750-015 (for Terxy), a reducer Bushing is required. Kawasaki Genuine Accessories part number TLR36A. * Good traction on grass and soft ground without damaging the surface * Moderate tread design * Not for use on front wheels of MULE 500, 550, 600 or 610's * Replacement rod and clamps Full width protection for the centre area. Steel plate construction. The Sub Main Skid Plate KAF600009 must be installed at the same time using the hardware supplied with the Main Skid Plate.
TURF/HARD TIRE 20X10X10 * Good traction and wear on turf, hard dirt, and paved surfaces * Not for use on front wheels of MULE 500, 550, 600 or 610's WINCH MOUNT TURF/HARD TIRE FR 20.5X8X10 * Front tire only for Mule 500,550,600,610's * 20.5x8x10 * Tread pattern same as rear turf/hard surface tires (41009-0140A) * For use on turf, hard dirt, and paved surfaces WINCH MOUNT PART 2 WINCH ACCESSORY KIT WINCH HANDLEBAR SWITCH * Accessory kit for all winches * Contains 2 Flexible Straps, 2 Shackles, and one Snatch Block * Packed in rugged Cordura nylon case 8" x 10" x 3" * Adjustable mounting straps on back * Rocker switch * Handlebar mounted * For Warn 2.5, 3.0 WINCH REMOTE HAND HELD WINCH REMOTE WIRELESS * Required to install Warn or Superwinch * Required to install winch mount winches * Mounts winch inside front grill * KAF600-021on Mule 600 2x4 only * Also For Mule 600, also order order 32190-0163 KAF600-021and 32190-0163 * This is a great accessory for your winch * This convenient remote allows you to use the handheld remote instead of the handlebar switch * Same as included with Warn RT30 * Includes connector socket * Operates your winch from anywhere from within a 50' radius * Wiring harness with built-in antenna and all hardware * Works with any warn powersports winch with a contactor and mini-rocker control switch * Activation process and recessed buttons prevent accidental winch activation * Two color LED indicates when the system has powered on (Green) and when the system has begun winching (Red) * System automatically powers off to conserve battery life * Large buttons for easy use and when wearing gloves * Works at all vehicle voltage levels that allow winch operation * All components are weatherproof * Handlebar-mounted holster keeps the handheld remote at the ready WINCH WARN RT25 WINDSHIELD FIXED WINDSHIELD FLIP UP * New ergonomic freewheel clutch handle * Fits existing mounts and spaces * Mini- rocker switch * Includes roller fairlead * Sealed all metal drive train and housing * Color-coded wiring for easy installation * Providing excellent protection and visibility, this high quality full width windshield is made from durable polycarbonate and provides unmatched protection against the elements The flexible centre portion allows easy access to front storage compartment * Easy installation and removal with included WINDSHIELD REPL FLEX WINDOW * Seamless one-piece design * Allows full opening of storage compartment * Strong * All parts to replace and install the and attractive 3-dimensional domed flexible flap on the Mule 600 series shape * Two position latching - fully windshield closed and vented * Works with hard or soft tops * Operating assist with gas springs
hardware * Use alone, or with soft or hard top * Must be removed to transport vehicle in non-enclosed vehicle Powered by TCPDF (www.tcpdf.org)