73
product s details SPECIFIC ENGINE OLIVATOR M SERIES REDUCTION GEAR CRANKCASE Reinforced engine housing fixed to the reduction gear (8 bolts). PATENTED BEARING SUPPORT These powerful engines have been designed specifically for the olive shakers. Every component of the engine has been studied to resist to high vibrations. The engine has high torque and high performances. ROTATION SYSTEM In case-hardening steel. ENGINE CRANKSHAFT - PISTON CLUTCH 78 mm clutch designed for the heavy duty conditions of professional use. CLUTCH DRUM Clutch drum made of special high performance material. No weldings are used; this is to guarantee a longer life of this component. 74 The two pieces crankshafts with two counterweights are made of high quality steel. The special design reduces vibrations and guarantees high performances. Ultra light pistons are used to reduce vibrations. All pistons made of special cast iron have two pistons rings to ensure a longer life of the engine. DIGITAL IGNITION The digital ignitions have been specifically developed by ACTIVE to offer better performances. The digital ignition guarantees an easier start of the engine in any condition, a cleaner engine and lower emissions. CARBURETTOR MUFFLER FUEL TANK Walbro WT diaphragm carburettors with primer are used on all engines. Diaphragms are made of a special material (Mylar) used to guarantee good and long performances even using unleaded fuel with high percentage of alcohol and/or alkylic fuels. The special muffler reduces the noise and improves the engine performances. Graphite gasket resists to high temperature (up to 900 C ). A larger cap on the gasoline tank makes easy the filling operation. All pipes are manufactured in Viton, special material resisting to unleaded fuel corrosion and high temperatures. Special device to avoid Vapor-Lock. www.active-srl.com
HARNESS AIR FILTER REDUCTION GEAR Reduction gear designed specifically for the use on the olive shakers. The harness is ergonomic, adjustable and is equipped with anti vibrations system. The cushion has been designed to guarantee the maximum comfort. The paper filter guarantees better performances and longer life of the engine. CHROMIUM-PLATED SHAFT PROJECT WITH 2 BUSHING PATENTED HANDLE OSCILLATING HANDLE The patented handle is freely sliding to reduce the vibrations an to offer an ideal comfort to the operator. The handle is also equipped with a control to avoid the branches to get out from the hook. The oscillating handle guarantees to the operator a better comfort. 75 TANK GUARD CARBURETTOR HEATING KIT SUPPORT An heavy duty steel guard is mounted to protect the tank and gear box from shocks. The kit to warm intake air ensures an easy start in any conditions. Ideal when temperatures are low. Thanks to a metal support, assembled to the engine, the unit can be easily layed on the ground.
Olivator Series M 50 Equipment Shaft reinforced 2 mt (ø26) Telescopic shaft extendible 2-3,20 mt (ø30 - ø26) 21128 21488 shaft, hook and rubber hook protection Displacement cc Power Hp/Kw Ignition Fuel tank capacity lt movement mm per minute Minimum length mt Weight kg (without shaft) 76 M50 - shaft 2 mt 600753 51.7 3.0/2.2 M50 - Telescopic shaft 600754 51.7 3.0/2.2 1.1 62 1800 2.9 10.5 1.1 62 1800 2.9 10.5 M 60 Powerful and high torque engine specifically designed for the shaker. Every component of the engine has been studied to resist to strong vibrations. Several patents pending. The Active OLIVATORS do not damage the tree roots and the young buds, vital for next harvesting. The Active OLIVATORS reduce the harvesting time and guarantee more competitiveness. Equipment Shaft reinforced 2 mt (ø30) Telescopic shaft extendible 2-3,20 mt (ø30 - ø26) 21865 shaft, hook and rubber hook 21866 protection Displacement cc Power Hp/Kw Ignition Fuel tank capacity lt movement mm per minute Minimum length mt Weight kg (without shaft) M 60 - shaft 2 mt 600702 51.7 3.0/2.2 1.3 62 1900 2.9 14 M 60 - shaft 2-3.20 mt 600703 51.7 3.0/2.2 1.3 62 1900 2.9 14 www.active-srl.com
Olivator Series M 70 A new powerful 63cc engine is assembled to this model. The extra power of this engine guarantees higher productivity. Every component of the engine has been studied to resist to strong vibrations. Several patents pending. The Active OLIVATORS do not damage the tree roots and the young buds, vital for next harvesting. The Active OLIVATORS reduce the harvesting time and guarantee more competitiveness. Equipment Shaft reinforced 2 mt (ø30) Shaft reinforced 4 mt (ø30) 22557 shaft, hook and rubber hook 22069 protection Displacement cc Power Hp/Kw Ignition Fuel tank capacity lt movement mm per minute Minimum length mt Weight kg (without shaft) M 70 - shaft reinforced 2 mt M 70 - shaft reinforced 4 mt 600801 63.0 4.5/3.3 600805 63.0 4.5/3.3 1.3 62 2000 2.9 14.5 1.3 62 2000 2.9 14.5 77 HOOK RUBBER HOOK PROTECTION 42 mm 42 mm 40 mm M70-M60 M50 M70-M60 M50 Hook designed to get the best grip on the branch Made of special rubber to guarantee the protection of the branches. Aluminium hook for 2 mt (M70/M60) and Aluminium hook for 4 mt (M70) 21762 Aluminium hook M60 21872 Aluminium hook M50 23252 Rubber hook for M70 and M60 21761 Rubber hook for M50 21280
Olivator Series MOD. E 20 - E 20 B TRANSMISSION BATTERY CHARGE DISPLAY Green and red leds indicating good or low battery charge. ADVANTAGES: 78 Very quiet unit; 5 working speeds; No damages to tree roots and leaves; High productivity (90-160 KG/hour); The motor positioned at the bottom of the shaft guarantees an balance when using the machine; Low battery consumption (i.e. 12V, 45 A battery = approx 8 working hours); Several safety devices: - When overheated motor, stops automatically. It will not restart till it reaches standard working temperature; - When, for any reason, the top heads are not rotating the motor stops till the moment the heads can again turn; - In the case a mistake is made in connecting the battery, the electronic circuit will not be damaged. Tension Power used Working area Speed control Max. fingers rotation Weight Length Height (including 1 mt extension) 12 v 4-10 Amp 550 mm x 275 mm 5 speed electronic control 2000 RPM 3 kg 2700 mm 4,2 mt - 5,2 mt Alimentation E 20 600900* 15 mt cable for car battery use E 20 B 600901* back pack battery *Battery not included www.active-srl.com
Accessories and Spare Parts for Olivator E 20 - E 20 B 79 LOOP HANDLE BACK PACK BATTERY (only for E 20 B) Loop handle 22570 1 mt EXTENSION Lithium-polymer battery (80% charge guaranteed up to 1600 charges) Capacity: 30 Amp h The battery has a charger indicator and a safety IP 65 connector Tension: 12,8 v Power: 600 Watt Weight: Battery only 4,2 Kg - Battery and back pack bag 5,0 Kg 1000 mm Extension 22632 Battery and back pack bag 600920* Battery 22848* Battery charger 22849 *Battery can be charged ONLY USING ORIGINAL battery charger (p.n. 22489)
Olivator Series MOD. M 34 shaft ø 26 mm - 1,5 mm 1500 mm 650 mm All attachment (brushcutter, pruner, hedge trimmer, blower, cultivator etc.- see pages 30-31) can be used on the Olivator M34. The patented Rotofix handle system allows the operator to lock the handle in the desired position. This device guarantees high comfort and safety. UNLOCKED LOCKED 80 Displacement cc Power Hp/Kw Carburettor diaphragm type Walbro WYK Ignition Air filter Clutch ø mm Fuel tank capacity lt M 34 600940 29.0 1.9/1.4 WYK digital single 78 0.6 7.0 Weight kg MOD. A 40 1500 mm RPM reduction Couple limitator A 40 600910 4 : 1 YES The Olivator A40 attachment can be used on all EVOLUTION, VIPER and BACK PACK brushcutter models. www.active-srl.com