Electric locks ELECTRIC LOCKS

6 Electric locks ELECTRIC LOCKS

Introduction ELECTRIC LOCKS ABLOY are without doubt, the world s premier manufacturer of electric locks. Our extensive range includes both motor and solenoid locks providing security, flexible functionality and good looks. When using an access control system, be it digital, card swipe, proximity or any other, ABLOY electric locks will ensure that the security of each door is not compromised whilst allowing the freedom of access required. The range of motor locks feature bolts withdrawn by motor to provide hands-free unlocking of the door, whilst ABLOY solenoid locks use solenoids to engage handles or free mechanisms to allow entry. As with other ABLOY ranges, electric locks come in all shapes and sizes, to suit most types of door. Mechanical override is provided by our ABLOY PROTEC cylinder mechanism which will be supplied as standard unless stated otherwise. If you are using an access control system, be sure to consider an electric lock it will provide all the security and looks of a mortice lock whilst ensuring convenient and reliable entry and exit. You will find wiring diagrams for each of our products, with online technical support on our website - www.abloysecurity.co.uk. Alternatively, call 0870 2256985 and speak to a member of our technical support team. Products comply with European legislation regarding Safety and Electro-Magnetic Compatibility (EMC). Handing diagram 1

Motor locks EL520 12/24V 8904 For wooden or metal doors, with deadbolt and anti-friction bolt. Fail locked outside. Free egress from inside when handle fitted (control unit included) For wooden or metal doors, with latch bolt and separate day/night functions (DIN 18251) 2 Non-handed Deadbolt is withdrawn by motor and thrown by spring force Deadbolt and antifriction bolt are both deadlocked when door closes Anti-friction bolt is freed when deadbolt withdrawn by motor If deadbolt is thrown manually by depressing trigger bolt when door is open, it will be withdrawn immediately to prevent abuse or damage In the event of power failure deadbolt is automatically thrown, released by mechanical override Meets EN179 and EN1125 for emergency and panic exit doors and EN 1634-1 for fire resistance (when used with correct exit hardware) Tested to draft standards for burglary pren1627 and mechanical resistance pren12209-1 Control switches Continuous bolt remains in open position as long as circuit is closed Momentary bolt deadlocks after a delay of 2-15 seconds (adjustable) Bolt position, door open, cylinder and handle operation Fitting Please add 10mm to the case depth to allow for cable socket and plug Bolt is withdrawn by motor and thrown by spring force Bolt deadlocks when door closes in night mode Modes of operation Night: bolt throws 20mm handle does not operate Day: bolt throws 14mm handle operates Switching between day/night modes can be done remotely Control switches Continuous - bolt remains in open position as long as circuit is closed Momentary bolt is released after delay of 1-20 seconds (adjustable) Bolt: changing point 15-18mm Anti-tamper door contact Installation prevents manual triggering of bolt

ELECTRIC LOCKS 60-0119-SSS 60-0219-PSS 6181 TECHNICAL SPECIFICATION Product No EL520 8904 Operating voltage +15%, -10% 12VAC to - 18VAC ±15% 12VDC to 24VDC 24VDC stabilized Current 12VDC Idle 80mA - Norm 450mA 100mA Max 1300mA 300mA Current 24VDC Idle 40mA - Norm 220mA - Max 600mA - Adjustable delay (secs) 2-15 1-20 Temperature range (ºC) -20 to +60-20 to+70 Backset (mm) Standard 65 50 Special 55 and 60 - Forend (mm) Standard 24 32 Special 20 - Follower (mm) 9 8 Forend finish Stainless steel Polished chrome ACCESSORIES Product No EL520 8904 Cylinder double - CY002 Cylinder single CY303 - CY307 CY313 CY317 Strike EA322 (inc) 4692 (inc) Flat1R Handles Futura 60-0119-SSS 60-0219-PSS Primo - 6181 (single) Cable EA218 (inc) EA212 Cover plate - 6171 Rebate set Reb 21, 22 Reb 9 or 10 (optional) or 23 Anti-tamper contact switch - 1076 Spindle converter (8-9mm) included 807227 - NB Unless otherwise stated all electro-mechanical lockcase cylinders will be supplied as ABLOY PROTEC PSS: Polished stainless steel SSS: Satin stainless steel 3

Motor locks 8910 GBR889 EL648 EL614 For wooden or metal doors, with latch bolt As 8910 but with RQE function For narrow stile doors, with heavy duty hook bolt (control unit plus strike plate with integrated door contact included) As EL648 but pierced for Euro profile fittings Bolt is withdrawn by motor and thrown by spring force Bolt deadlocks when door closes Inside handle operates at all times Control switches Continuous bolt remains in open position as long as circuit is closed Momentary bolt is released after delay of 1-20 seconds (adjustable) RQE (GBR889 only) Request to exit function operates on handle Single cylinder with inside blanking plate must be used EL648 EL614 4 Bolt: changing point 15-18mm Anti-tamper contact switch Installation prevents manual triggering of bolt Bolt is withdrawn and thrown by motor Integrated door contact in lockcase and EA300 strike prevents bolt being thrown when door is open, to prevent damage or abuse Control switches Continuous bolt remains in open position as long as circuit is closed Momentary bolt deadlocks again after delay of 1-20 seconds (adjustable) Bolt and door positions

ELECTRIC LOCKS TECHNICAL SPECIFICATION ACCESSORIES 60-0219-PSS Product No 8910 EL648 EL614 GBR889 Product No 8910 GBR889 EL648 EL614 6181 Operating voltage ±15% 24VDC 24VDC 24VDC stabilized stabilized stabilized Current Idle - 70mA 70mA Norm 100mA 150mA 150mA Max 300mA 700mA 700mA Adjustable delay (secs) 1-20 1-20 1-20 Temperature -20 to +70-25 to +70-20 to +60 range (ºC) Backset (mm) Standard 50 25 25 Special - 35 35 Follower (mm) 8 - - Forend finish Polished chrome Cylinder double - - CY202 CY304 CY308 CY314 CY318 Cylinder single CY016/ CY016/ - - plate 1 plate 1 Cylinder and turn - - CY201+ CY305 6411 CY309 CY315 CY319 Strike 4692 4692 EA300 EA300 (inc) (inc) (inc) (inc) Flat1R Flat1R Handles Primo 6181 6181 - - Futura 60-0219 60-0219 -PSS -PSS - - Cable EA211 EA210 EA214 EA214 (inc) (inc) Cover plate 6171 6171 - - Rebate set Reb 9 Reb 9 - - (optional) or 10 or 10 Anti-tamper contact switch 1076 1076 - - NB Unless otherwise stated all electro-mechanical lockcase cylinders will be supplied as ABLOY PROTEC PSS: Polished stainless steel SSS: Satin stainless steel 5

Motor locks EL420 12/24V For narrow stile doors, with deadbolt and anti-friction bolt. Fail locked outside. Free egress from inside when handle fitted (control unit included) 8329 For narrow stile doors, with latchbolt and separate day/night functions (DIN 18251) 12 6 Non-handed Deadbolt is withdrawn by motor and thrown by spring force Deadbolt and antifriction bolt are both deadlocked when door closes Anti-friction bolt is freed when deadbolt withdrawn by motor If deadbolt is thrown manually (by depressing trigger bolt when door is open) it will be withdrawn immediately to prevent abuse or damage In the event of power failure deadbolt is thrown automatically (released by mechanical override) Meets EN179 and EN1125 for emergency and panic exit doors and EN1634-1 for fire resistance (when used with correct exit hardware) Tested to draft standards for burglary pren1627 and mechanical resistance pren12209-1 Control switches Continuous - bolt remains in open position as long as circuit is closed Momentary - bolt deadlocks again after delay of 2-15 seconds (adjustable) Bolt positions, door open handle and cylinder operation Fitting For wooden doors please add 10mm to lockcase length to allow for cable socket and plug (forend fixing kit available - PTS0006) Bolt is withdrawn by motor and thrown by spring force Bolt can be deadlocked by allan key or by remote switch Modes of operation 1. Night: bolt throws 14mm - handle does not operate 2. Day: bolt throws 10mm - handle operates 3. Bolt may be retained in lockcase if required The function is selected by presetting the selector screw before fitting the lockcase. Depending on the choice of basic function the snib on the lock forend can be set to select the day/night function and then secured with a locking screw. Control switches Continuous bolt remains in open position as long as circuit is closed Momentary bolt throws automatically after delay of 1-20 seconds (adjustable) Bolt: changing point 3-7mm Anti-tamper contact switch Installation prevents manual triggering of bolt

ELECTRIC LOCKS TECHNICAL SPECIFICATION ACCESSORIES 60-0719-SSS 6317 Product No EL420 8329 Operating voltage +15%, -10% 12VAC to - 18VAC ±15% 12VDC 24VDC to 24VDC stabilized Current 12VDC Idle 80mA - Norm 450mA - Max 1300mA 0.3A Current 24VDC Idle 40mA - Norm 220mA - Max 600mA - Product No EL420 8329 Cylinder double - CY067 Cylinder single CY303 - CY307 CY313 CY317 Strike EA322 (inc) Flat 1R Handles Futura 60-0719 - -SSS Primo - 6317 (single) Cable EA218 (inc) EA212 Adjustable delay (secs) 2-15 1-20 Anti-tamper contact switch - 1076 Temperature -20 to +60-20 to +70 range (ºC) Backset (mm) Standard 30, 35 30 Special 40, 45 - Forend Standard 24 32 Special 28 - Spindle converter (8-9mm) included 807227 - NB Unless otherwise stated all electro-mechanical lockcase cylinders will be supplied as ABLOY PROTEC PSS: Polished stainless steel SSS: Satin stainless steel Follower (mm) 9 8 Forend finish Stainless steel Polished chrome 7

Solenoid locks EL560 12/24V EL561 12/24V EL580 12/24V EL582 12/24V For wooden or metal doors, with deadbolt and anti friction bolt, fail locked/fail unlocked As EL560 but both handles controlled For wooden or metal doors, with latchbolt, fail locked/ fail unlocked As EL580 but with solid spindle (DIN 18251) 88/93/98 55/60/65 16.5 10 66.5 22 8/ 9 38 235 8 6 20 6 8 21.5 72(PZ)/74(RZ) 168.5 35 8 20/24 6 3 33.7 38 8 Non-handed Easily reversible trigger bolt, suitable for all hands of door Quick change fail locked to fail unlocked Deadbolt and anti-friction bolt deadlock when door closes Inside handle operates at all times Meets EN179 and EN1125 (EL560 only) for emergency and panic exit doors and EN 1634-1 for fire resistance (when used with correct exit hardware) Tested to draft standards for burglary pren1627 and mechanical resistance pren12209-1 EL560 - Outside handle operates when engaged by solenoid EL561 both handles electronically controlled Key override at all times Request to exit (RQE) on inside handle Bolt position and cylinder operation Non-handed Quick change fail locked to fail unlocked Easily reversible trigger bolt and deadbolt, suitable for all hands of door Selectable 14mm or 20mm deadbolt throw Unique anti-tamper feature, when bolt throw is set at 14mm the deadbolt cannot be manually thrown by the trigger bolt Anti-thrust feature, to ensure the bolt cannot be manipulated from the outside when door is closed Selection of controlled follower side (EL580) Low current consumption Control Switches EL580 inside handle always operates Fail locked: outside handle operates when power on Fail unlocked: outside handle operates when power off EL582 Fail locked: both handles operate when power on Fail unlocked: both handles operate when power off EL580 and EL582 - bolt position and handle operation EL580 - request to exit (RQE)

ELECTRIC LOCKS 6/004PZ+BL 6/010PZ+BL 6/007 TECHNICAL SPECIFICATION Product No EL560 EL580 EL582 EL561 Operating voltage +15%, -10% 12VDC to 12VDC to 12VDC to 24VDC 24VDC 24VDC stabilized stabilized stabilized Current max 12VDC 1300mA - - 24VDC 650mA - - Idle - 0.12A 0.12A Norm - - - Max - 0.35A 0.35A Temperature ºC -20 to +60-20 to +60-20 to +60 Backset (mm) Standard 65 50 and 70 50 and 70 Special 55 and 60 - - ACCESSORIES Product No EL560 EL561 EL580 EL582 Cylinder double - CY304 - CY002 CY308 CY314 CY318 Cylinder single CY303 - CY016/ - CY307 plate1 CY313 CY317 Strike (included) EA322 EA322 EA305 EA305 Handles Futura 60-0419- 60-0419- 60-0619- 60-0619- SSS SSS PSS PSS or or 60-0319- 60-0319- SSS SSS 60-0619-PSS 60-0419-SSS Forend (mm) Standard 24 - - Special 20 - - Follower (mm) 9 8 8 Forend finish Stainless steel Polished chrome Primo - - 6/007 6/007 (double) (double) Cable 807671 807671 EA210 EA211 (inc) (inc) Rebate set Reb 21, Reb 21, Reb 7 or Reb 7 or (optional) 22 or 23 22 or 23 8 8 Spindle converter (8-9mm) inc 807227 807227 - - NB Unless otherwise stated all electro-mechanical lockcase cylinders will be supplied as ABLOY PROTEC PSS: Polished stainless steel SSS: Satin stainless steel 9

Solenoid locks EL410 12 or 24V EL411 12 or 24V EL460 12/24V EL461 12/24V For narrow stile doors, with single action bolt, fail locked As EL410 but fail unlocked For narrow stile doors, with antifriction bolt, fail locked/fail unlocked As EL440 but both handles controlled (ANSI Standard) (DIN 18251) Bolt deadlocks when door closes Bolt collapses into lockcase as door is opened (push or pull) Inside handle operates at all times Key override at all times Control switches EL410 bolt collapses when power on EL411 bolt collapses when power off 300 6 10 22 8 20 35 ø8.5 (45)/(50)/55/60 (30)/(35)/40/45 20.5 ø10.5 ø10.5 91 ø5.5 76 8/ 9 25 254 25 21.5 ø5.5 ø8 92(PZ)/94(RZ) Non handed Easily reversible trigger bolt, suitable for all hands of door Quick change fail locked to fail unlocked Deadbolt and anti-friction bolt deadlock when door closes EL460 - Inside handle operates at all times EL461 - Both handles electronically controlled Key override at all times Request to Exit (RQE) on inside handle Bolt position locked and unlocked (24)/28 3 20 21.8 16.9 ø8 15 ø4.5 30 Meets EN179 and EN1125 for emergency and panic exit doors (EL460 only) and EN 1634-1 for fire resistance (when used with correct exit hardware) Tested to draft standards for burglary pren1627 and mechanical resistance pren12209-1 Request to Exit (RQE) on inside handle Bolt and cylinder operation Fitting 10 For wooden doors please add 10mm to lockcase length to allow for cable socket and plug (forend fixing kit available - PTS0006)

ELECTRIC LOCKS TECHNICAL SPECIFICATION ACCESSORIES 4591 Product No EL410 EL411 EL460 EL461 Product No EL410 EL460 EL461 EL411 6310 6311 60-0819-SSS Operating voltage 12VDC 12VDC to +15%, -10% stabilized 24VDC stabilized ±15% 24VDC stabilized Current max 12VDC 0.4A 1300mA 24VDC 0.2A 650mA Temperature ºC -35 to +66-20 to +60 Backset (mm) Standard 24.6 30, 35 Special 28.6 40, 45 Forend (mm) Standard 25.4 24 Special - 28 Follower (mm) - 9 Split spindle (mm) - 8 Forend finish Stainless steel Satin chrome Cylinder double - - CY304 CY308 CY314 CY318 Cylinder single CY404 CY303 - CY307 CY313 CY317 Strike 4610 (inc) EA322 (inc) EA322 (inc) Flat 4 Handles: Futura - 60-0819- 60-0819- SSS SSS Paddle 4591 - - Lever 6310 - - or 6311 Threaded thumbturn 4067-SAA - - Cable - EA218 (inc) EA218 (inc) Spindle converter (8-9mm) included - 807227 807227 NB Unless otherwise stated all electro-mechanical lockcase cylinders will be supplied as ABLOY PROTEC SSS: Satin stainless steel 11

Solenoid locks EL412 12 or 24V EL413 12 or 24V EL414 12 or 24V EL415 12 or 24V For narrow stile doors, fail locked As EL412 but fail unlocked For narrow stile doors, fail locked and pierced for Euro profile DIN fittings As EL414 but fail unlocked High security double action bolt Bolt deadlocks when door closes Bolt collapses into lockcase as door is opened (push or pull) Key/thumbturn override at all times Suitable for mounting horizontally Non-handed Steel bolt for maximum security Control Switches EL412 bolt collapses allowing opening of door when power on EL413 bolt collapses allowing opening of door when power off Bolt position locked and unlocked N.B. It is recommended that mechanical override always be used with this lockcase Not recommended for fire route doors High security double action bolt Bolt deadlocks when door closes Bolt collapses into lockcase as door is opened (push or pull) Key/thumbturn override at all times Suitable for mounting horizontally Non-handed Steel bolt for maximum security Control Switches EL414 bolt collapses allowing opening of door when power on EL415 bolt collapses allowing opening of door when power off Bolt position locked and unlocked N.B. It is recommended that mechanical override always be used with this lockcase Not recommended for fire route doors 12

ELECTRIC LOCKS EL512 12 or 24V For wooden or metal doors, fail locked EL513 12 or 24V As EL512 but fail unlocked TECHNICAL SPECIFICATION High security double action bolt Bolt deadlocks when door closes Bolt collapses into lockcase as door is opened (push or pull) Key/thumbturn override at all times Non-handed Steel bolt for maximum security Control Switches EL512 bolt collapses allowing opening of door when power on EL513 bolt collapses allowing opening of door when power off Bolt position locked and unlocked N.B. It is recommended that mechanical override always be used with this lockcase Not recommended for fire route doors ACCESSORIES Product No EL412 EL414 EL512 EL413 EL415 EL513 Operating voltage +15%, -10% 12VDC 12VDC 12VDC stabilized stabilized stabilized ±15% 24VDC 24VDC 24VDC stabilized stabilized stabilized Current max 12VDC 0.48A 0.48A 0.48A 24VDC 0.24A 0.24A 0.24A Temperature ºC -20 to +60-20 to +60-20 to +60 Backset (mm) Standard 25 25 50 Special 30 or 35 30 or 35 Forend finish Polished chrome Product No EL412 EL414 EL512 EL413 EL415 EL513 Cylinder double CY067 CY304, CY308 CY002 CY314, CY318 Cylinder single - CY303, CY307 CY016/plate 1 CY313, CY317 Cylinder and turn CY066 CY305, CY309 CY001 CY315, CY319 Strike Flat 1R, 2R Flat 1R, 2R Flat 1R, 2R 3R, 4, or 3R, 4, or 3R, 4, or 4692 4692 4692 Cable EA211 EA211 EA211 NB Unless otherwise stated all electro-mechanical lockcase cylinders will be supplied as ABLOY PROTEC 13

Striker plates Flat1R Flat2R/Flat3R Flat4 EA322 Flat strike with lead in edge (hardened steel) Flat2R Flat strike with double lead in edge (hardened steel) Flat3R 100mm double lead in edge Flat strike with lead in edge to suit 100mm frame Flat strike with lead in edge to suit DIN/Europrofile mortice locks (hardened steel). NB special strikes are available for steel or UPVC door frames - please ask for details 4692 EA300 EA305 4610 Strike for wooden flush doors Strike for wooden flush doors Strike for metal flush frames Strike for wooden flush doors COMPATIBILITY EL520 Product No Flat1R Flat2R Flat3R Flat4 4692 EA300 EA305 EA322 4610 8904 8910 GBR889 EL648/EL614 EL420 8329 EL560/EL561 EL410/EL411 EL460/EL461 14 EL580/EL582 EL412/EL413/ EL414/EL415/ EL512/EL513

Futura handles ELECTRIC LOCKS Lever handles Futura lever handles Lever on round rose Lever on longplate Fixed pad and lever on narrow longplate Meet the requirements of BS EN179 for escape levers Return to door design ideal for fire escape doors Fixing plates are made of stainless steel with 2 pairs of holes placed to suit DIN or Scandinavian standards Stainless steel tube, 1.25mm thick, to prevent overload of the lockcase, with no need for a support spring Supplied complete with relevant escutcheons, roses/plates and fixings Handle dimensions for 60-0219-PSS 60-0319-SSS 60-0619-PSS Push/pull handles Handle dimensions for 60-0119-SSS 60-0419-SSS Handle dimensions for 60-0719-SSS 60-0819-SSS All push/pull handles supplied complete with fixings. 19mm diameter, 200mm between fixing points 50-3519-PSS Single 50-3719-PSS Single 50-3919-PSS Single 50-4119-PSS Single 50-4319-PSS Single 50-4519-PSS Single 50-3419-PSS Double 50-3619-PSS Double 50-3819-PSS Double 50-4019-PSS Double 50-4219-PSS Double 50-4419-PSS Double COMPATIBILITY Handle Lockcase EL520 8910 8904 GBR889 EL560 EL561 EL580 EL582 EL420 EL460 EL461 60-0119-SSS 60-0219-PSS PSS: Polished stainless steel SSS: Satin stainless steel 60-0319-SSS 60-0419-SSS 60-0619-PSS 60-0719-SSS 60-0819-SSS 15

Primo handles Rebate sets 6181 6317 Dimensions to suit lockcases (Reb21 illustrated) 6/007 6310, 6311 62 Ø16 35 16.5 12 135.5 COMPATIBILITY Product No Reb7 Reb8 Reb9 Reb10 Reb21 Reb22 Reb23 12mm 25mm 12mm 25mm 13mm 19mm 25mm 90 EL520 8904 8910 COMPATIBILITY Handle Lockcase 8329 8910 8904 GBR889 EL580 EL582 EL410 EL411 6181 6/007 6317 6310 6311 4591 GBR889 EL560 EL561 EL580 EL582 16

Electric locks EFF EFF 351 RR AK RR 12 or 24V Fail unlocked electric lock for single or double action doors. enables remote locking and unlocking. Monitored 351 AK RR 12 or 24V As EFF EFF 351 AK RR but unmonitored ELECTRIC LOCKS Non-handed The locking bolt is held in locked position by lever arm which is controlled by solenoid action When door closes, the bolt latches into the striking plate When power is applied to the door while in the closed position the bolt will deadlock The distance between lock and striking plate can be adjusted by the use of spacers placed under the strike plate Accessories A0502-01 Surface housing with mounting component. Allows the Eff Eff 351 to be surface mounted to glass doors or flush over panel, rebated or non-rebated 80335-01 Standard strike for doors up to 44mm (included) 80235-01 Strike for thicker doors up to 54mm Equipped with an armature and a trigger contact (both potential-free switch over contacts) Meet pren13637 building hardware standard with reliable unlocking under side pressure of up to 5000N Bolt position N.B. The armature contact can be used for monitoring the lock status TECHNICAL SPECIFICATION Operating voltage 12VDC (±1V) Operating voltage 24VDC (±2V) Rated resistance 37.0 OHm 150.0 Ohm DC current consumption 320mA 160.0 ma Resistance against door being forced 5000N 5000N Extension of latch bolt 10mm 10mm Admissible distance between lock face plate and strike 2-4.5mm 2-4.5mm (rec. 3mm) (rec. 3mm) Forend finish Stainless Stainless steel steel 17

Kamlok 2020 24VDC fail unlocked, with lock status monitoring switch, single bevelled door position switch and bevelled deadbolt 3020 24VDC fail locked, with integral lock status monitoring switch and door position switch. The bevelled deadbolt will behave as a mechanical mortice latch to ensure security when power is not available General Solenoid bolts for installation in metal or wooden frames and transom sections of single action entrance doors. - 2020 Bolt retracted by spring when not powered Snib releases bolt ready for locking as door closes Bolt deadlocks when power on Bolt bevelled to allow lock to operate under side pressure Key/thumbturn override - 3020 Bolt deadlocks when door closes Bolt retracts when power on Key/thumbturn override Lock status sensing (LSS) providing integral clean SPDT (Form C) change over contacts rated at 4amps at 250VAC (resistive load) Electrical Solenoid 24VDC continuous duty twin coil (both coils used to pull bolt in - one coil to hold bolt) 1.4amp total current draw during pull, 220mA on hold N.B. Connecting flying lead with soft start meets EU Regulations on electromagnetic compatibility. Accessories CY404PT/404838 ABLOY PROTEC mortice threaded cylinder, complete with keys and special operating cam KCE Cylinder extensions up to 200mm: for use where mechanical key override is required for a fail locked lock through a gate post or door frame 4067-SAA Exit thumbturn 18

Switch locks ELECTRIC LOCKS EP400 Key removable in on and off positions EP401 Key removable in on or off positions only EP402 Momentary contact General Circuit diagram ABLOY switch locks provide key actuated switching for burglar alarms, control boxes and other high security applications Dimensions Suitable for panels from 0.5mm to 22mm thick Cylinder housing of case-hardened chrome plated steel Hex nut: zinc plated steel Switch actuator and switch holder brackets of moulded plastic Cylinders: 11 Discs NB Supplied as ABLOY PROTEC unless stated otherwise Technical Details Locks have Honeywell ISXI-H58 microswitch Electrical values: 7A, 250VAC 7A res, 28VDC 4A ind, 28VDC Working temperature: -54 o C to +120 o C 19

Jig and extended drill DJ1010 Jig CD1010 Drill Designed for drilling through door leaf to accept electrical connections Door contact 1076 Used to indicate the position of the door. For wood or steel doors. Loop type: open or closed Electrical configuration: SPDT Max current: 0.25A. Max voltage: 30V AC/DC Gap distance: Wood - 25mm Steel - up to 12mm 20

Microswitch keeps 8400DB For monitoring a mortice deadbolt. Includes 4613 striker plate 8400DL For monitoring a mortice deadlatch. Includes Flat1RM striker plate 8852 connection cable For use with 8400DB/DL ELECTRIC LOCKS 4613 Flat1RM Striker plate for mortice deadbolt Striker plate for mortice latch 21

Interlocking controls Memorilok Two door interlock control units with desk console and battery back up. Available as 12/24VDC, 12VDC or 24VDC, rated 2 Amp Stylish, neat desk/wall mounted central console Full electronic interlocking Adjustable timed output LED status door indicators Mains on - fuse failed LED s Door open alarm output Materials Control unit: steel enclosure Control console (desk version): satin aluminium Dimensions Control unit: 300mm H x 310mm W x 75mm D Versions 902B Two door interlock control, 12/24VDC, without batteries 902B-12 Two door interlock control complete with 12VDC battery back up power supply and desk console 902B-24 Two door interlock control complete with 24VDC battery back up power supply and desk console 2069 Four way interlock interface programming module, enables the 902B and 903B range to be easily combined Desk console: 65mm H x 170mm W x 70mm D 22 Product on this page is manufactured by BSB Electronics Ltd

Switches ELECTRIC LOCKS 1900 series Available with key operation, push button and/or LEDs POWER SUPPLIES Black steel surface mounting box available (-01) Cylinders for 1930 and 1931 will be supplied as ABLOY PROTEC unless otherwise stated Finish SAA plates: 40 x 120mm - 10g 1900 Illuminated exit button, momentary contact 1901 With maintained contact push on/push off 1920 Indicator plate with 2 LED indicators 1930 Keyswitch: momentary contact spring return switch with LED indicators (cylinder not included - ref: CY404) 1931 With maintained contact, 2 position switch (cylinder not included - ref: CY404) 1910 Illuminated exit button with LED indicators, momentary contact 1911 Maintained contact push on/push off 901B 12/24VDC 2 Amp battery standby power supply without batteries 901B-12 12VDC 2 Amp battery standby power supply complete with one 12V 7Ah battery 901B-24 24VDC 2 Amp battery standby power supply complete with two 12V 7Ah batteries 903B 12/24 VDC 2 Amp battery standby timed power supply without batteries 903B-12 12VDC 2 Amp battery standby timed power supply complete with one 12V 7Ah battery 903B-24 24VDC 2 Amp battery standby timed power supply complete with two 12V 7Ah batteries 900-12-1 1 Amp power supply with battery back-up facility - 12VDC 23

Exit button 1940 Heavy duty green dome exit button on stainless plate. Contacts normally closed or normally open. Supplied with one gang back box Emergency call point KGGI/SG Break-glass emergency call point, surface mounting. Standard colour green, white to special order KGI Pack of 5 replacement glasses Flush bolts 942NH Automatic flush bolt for wooden doors (pair) 80 Spring loaded dust proof socket 842NH Automatic flush bolt for metal doors (pair) 24 23

Lead cover EA280 For doors opening up to 120 o EA281 Extra long, for doors opening to 180 o Door loop DL8 Surface mounted 13 armoured door loop ELECTRIC LOCKS 40 NB dimensions in brackets refer to EA281 Invisible when door is closed Enables the unbroken transfer of wires between door and frame Maximum diameter of wire bundle 6mm If distance from hinge pin to door frame is more than 20mm, the EA281 should be used Enables the unbroken transfer of wires between door and frame (internal use only) Maximum cable diameter 8mm Finish Satin anodised aluminium casting Not for use on centrally pivoted doors Finish Chrome 25

Cable concealment 71KP Frame bridge 77KP Return spring for 71KP 71KP Hole pattern For the concealed transfer of cable from the frame to the door leaf Simple to fit Accepts 6mm cable Suitable for any metal door opening to a maximum of 100º 77KP For use with doors opening in excess of 100º Allows cable to move within bridge without damage or kinking Finish Galvanized steel 26

Abloy Security Limited 1/3 Hatters Lane Croxley Business Park Watford Hertfordshire WD18 8QY... 01923 255066 01923 230281 sales@abloysecurity.co.uk www.abloysecurity.co.uk Master Locksmiths Association Full member Due to a continuous programme of development, Abloy Security Limited reserve the right to make alterations without notice. For technical reasons connected with colour reproduction the colours shown may vary slightly from those of the product. All dimensions provided within this catalogue are approximate and for guidance only. E. & O. E. For terms and conditions of sale, please refer to current price list. Abloy Security Limited markets high quality products and accessories for security applications. Our customer base provides solutions to a broad spectrum of public and private organisations throughout the UK and Ireland. The ASSA ABLOY Group is the world s leading manufacturer and supplier of locking solutions, dedicated to satisfying end-user needs for security, safety and convenience. An ASSA ABLOY Group company