side EX00 ecentralized Serial Wiring How to Order Valve Manifold Assembly Ordering example (000) Manifold S-WSAW-0B-C ( set) ouble solenoid 00-F ( sets) Single solenoid 00-F ( sets) side PW COM S-WSAW-0B-C set (Manifold part no.) 00-F sets (Single solenoid part no.) 00-F sets (ouble solenoid part no.) Stations J How to Order Solenoid Valves 00 F Note) Note) Available with manifold block for station additions. efer to pages --89 and --9. 000 000 000 000 : Non-locking push type : Push-turn locking slotted type A B position single solenoid position double solenoid position closed center position exhaust center position pressure center position dual port valve: N.C./N.C. position dual port valve: N.O./N.O. position dual port valve: N.C./N.O. C position dual port valves are applicable to 000 and 000 only. Internal pilot External pilot is not available for position dual port valves. Back pressure check valve None K Built-in Built-in back pressure check valve type is applicable to series 000 only. Back pressure check valve is not available for position closed center and position pressure ated voltage VC efer to Precautions on page --9. --
Specifications ateway (W) unit Model EX00-AB-X Applicable PLC/Communication protocol ockwell Automation, Inc. PLC 7. Kbit/sec,. Kbit/sec Communication speed 0. Kbit/sec ated voltage supply voltage range Current consumption No. of input/output points No. of input/output branches Branch cable Branch cable length Communication connector connector Ambient operating temperature/humidity Enclosure Applicable standard Weight (g) EX00-N evicenet elease.0 Kbit/sec, 0 Kbit/sec 00 Kbit/sec VC EX00-P POFIBS-P 9./9./9.7/87./00 kbit/sec./// Mbit/sec Input and control unit power supply: VC ±0% Solenoid valve power supply: VC +0%/ % ( drop warning at approx. ) Communication cables and connectors are sold separately. efer to options on page --7. 00 ma or less Maximum inputs/ outputs branches ( inputs/ outputs per branch) 8 core heavy duty cable m or less (total extension 0 m or less) M connector (8 pins, Socket) M connector ( pins, Plug) + to + C/ to 8% H (No condensation) IP L, CSA, CE 70 How to Order EX00 N Communication protocol N P AB evicenet POFIBS-P emote I/O (IO) Applicable W unit evicenet POFIBS-P -X emote I/O (IO) imensions 8 BS N SOL COM E ATEWAY NIT EX00 SEIES PE 7 88 EX00-AB-X VOLTAE VC/00 ma TYPE INPT/OTPT / IP COE IP SEIAL NO. MAE IN JAPAN VC COM A COM B COM C COM.. 0 0 7.9 8.8 --
side EX0 Serial Wiring with Input/Output nit How to Order Valve Manifold Assembly Ordering example (000) Manifold S-W0SQWN-0B-C ( set) side Stations ouble solenoid 00-F ( sets) Single solenoid 00-F ( sets) Input block (M: inputs, station) S-W0SQWN-0B-C set (manifold part no.) 00-F sets (Single solenoid part no.) 00-F sets (ouble solenoid part no.) J How to Order Solenoid Valves 00 F Note) Note) Available with manifold block for station additions. efer to page --9. 000 000 000 : Non-locking push type : Push-turn locking slotted type position single solenoid position double solenoid position closed center position exhaust center position pressure center A position dual port valve: N.C./N.C. B position dual port valve: N.O./N.O. C position dual port valve: N.C./N.O. position dual port valves are applicable to 000 and 000 only. Internal pilot External pilot is not available for position dual port valves. ated voltage VC Back pressure check valve None K Built-in Built-in back pressure check valve type is applicable to series 000 only. Back pressure check valve is not available for position closed center and position pressure center. efer to Precautions on page --9. --7
EX0 edicated Output Serial Wiring How to Order Valve Manifold Assembly Ordering example (000) Manifold S-SA-0B-C ( set) ouble solenoid 00-F ( sets) Single solenoid 00-F ( sets) side Stations 00 000 000 000 000 position single solenoid position double solenoid position closed center position exhaust center position pressure center A position dual port valve: N.C./N.C. B position dual port valve: N.O./N.O. C position dual port valve: N.C./N.O. position dual port valves are applicable to 000 and 000 only. side Internal pilot External pilot is not available for position dual port valves. How to Order Solenoid Valves S-SA-0B-C set (manifold part no.) 00-F sets (Single solenoid part no.) 00-F sets (ouble solenoid part no.) F ated voltage VC Back pressure check valve Note) Available with manifold block for station additions. efer to pages --89 and --9. : Non-locking push type : Push-turn locking slotted type None K Built-in Built-in back pressure check valve type is applicable to 000 only. Back pressure check valve is not available for position closed center and position pressure center. efer to Precautions on page --9. Note) J A, B port size (Metric) Symbol A, B port C fitting for ø. C fitting for ø C fitting for ø C fitting for ø C fitting for ø C8 fitting for ø8 C fitting for ø C8 fitting for ø8 C0 fitting for ø0 C8 fitting for ø8 C0 fitting for ø0 C fitting for ø 0 c / 0 c /8 0F / 0F /8 P, E port Applicable series fitting for ø8 fitting for ø0 fitting for ø fitting for ø c /8 /8 000 000 000 000 A, B port size (Inch) Symbol N N N7 N N7 N9 N7 N9 N N9 N 0N 0N 0T 0T M A, B port fitting for ø/8" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/8" fitting for ø/" fitting for ø/8" NPT / NPT /8 NPTF / NPTF /8 P, E port Applicable series fitting for ø/" fitting for ø/8" fitting for ø/8" fitting for ø/8" NPT /8 NPTF /8 A, B ports mixed 000 000 000 000 M A, B ports mixed In the case of mixed specifications (M), indicate separately on the manifold specification sheet. Port sizes of X, PE port for external pilot specification (, S) are ø (metric), ø/" (inch) for 000/000 and ø (metric) and ø/" (inch) for 000/000. --
EX0 edicated Output Serial Wiring Type F NKE Corporation ni-wire System Type ockwell Automation, Inc. Allen Bradley emote I/O (IO) System Type J, J SNX Corporation S-LINK System Name of terminal block, LE Note LE POWE SEN POWE V V V L L SHIL L L V V ni-wire System Send unit : S-0 SEN AESS escription ON for power supply input (ON when normal, flickers when voltage drops) Transmission indication: Blinks when normal, OFF or ON when abnormal No. of output points, points ON OFF LE POWE COM EO POWE SEN escription ON when power supply is ON ON when communication is normal Blinks when communication is initialized OFF for abnormal communication ON for abnormal communication emote I/O (IO) System AESS No. of output points, points ON OFF LE POWE SEN POWE SEN escription ON for power supply input Transmission indication: Blinks when normal, Blinks slowly when abnormal S-LINK System S-LINK controller: SL-CA IP SW. No. of output points, points (Type J) No. of output points, 8 points (Type J) J Cable wiring Transmission line supply supply V V supply V supply V V V V V Master unit LINE LINE SHIEL SI unit L L SHIEL L L V Type ground SI unit L L SHIEL L L V Type ground Terminal resistor a) Type T branching multi-drop wiring (S-LINK System) Black White Main transmission line V V Brown Blue Crimped connector SL-JA b) Crossover wiring (Sensor Link System) 0V V 0V V Transmission line The above is the example of using dedicated S-LINK flat ribbon cable SL-CMl00. Type K Fuji Electric Co., Ltd. T-LINK Mini System Type Q evicenet Type, OMON Corporation CompoBus/S STATION NO. PW MO/NET SETTINS Name of terminal block, LE LE LE POWE ALM POWE ALM TEM. x 0 x ON OFF V 0V S S S S S escription ON for power supply input ON for abnormal transmission or processor side power supply cut LE PW MO/ NET V V- CANL CANH V+ escription reen light ON for evicenet circuit power input OFF When this unit is off line or circuit power is OFF reen blinks When waiting for connection (On line) reen ON When connection is established (On line) ed blinks ed ON When connection time out occurs (recoverable communication abnormality) For MAC I duplication error, or BSOFF error (major communication abnormality) LE PW COMM E PW AESS NO. COMM E BS+ BH BL BS- V escription ON when communication power is supplied, OFF when power is OFF ON for normal communication, OFF for abnormal communication or waiting ON for abnormal communication, OFF for normal communication or waiting Note T-LINK Mini System Master unit : FTM00B Converter : FC00A-0 epeater : FC00A-C0 No. of output points, points evicenet OMON Corporation: CompoBus/ System Master unit : Type C00HW-M-V Master unit : Type CSW-M No. of output points, points CompoBus/S System Master unit : Type C00HW-SM-V Master unit : Type CQM-SM-V No. of output points, points (Type S) No. of output points, 8 points (Type S) V V CANL CANH V + V V CANL CANH V + BS + BH BL BS V BS + BH BL BS V Cable wiring Master unit Slave unit 0 Slave unit 0 Slave unit 7 S S S S S S S S S S S S Twisted pair wire with shield Type ground Type ground Type ground Type ground Connect the shielding wire to the S terminal. If the shielding wire is not connected to the S terminal, normal transmission will be impossible even for short distances. Furthermore, do not ground the shielding wire (S). V CANL CANH V + Master BH BL Connector with terminal resistor Branch crimped connectors --7
7 8 8 8 8 7 7 7 Type H NKE Corporation ni-wire H System Type JEMANET (JPCN-) Type V Mitsubishi Electric Corporation CC-LINK System Name of terminal block, LE LE POWE SEN POWE SEN ON OFF AESS V 0V V 0V O N escription ON for power supply input (ON when normal, flickers when voltage drops) Transmission indication: Blinks when normal, OFF or ON when abnormal LE POWE COMM ALAM POWECOMM ALAM V 0V A B S V 0V ON IP.SW escription ON for SI unit power supply input On for normal communication ON for abnormal communication LE PW L N S L E. LE. PW S LN B ATE 9 9 STATION NO. V 0V +V A B escription ON when communication power is supplied, OFF when power is OFF ON when normal data is being received ON when data is transmitted ON when data is received ON for transmission error/wrong setting, Blinks when station or transmission speed setting changes during operation 9 x 0 x Note ni-wire H System Send unit: S-H No. of output points, points JEMANET (JPCN-) (eference) AJ7J9-S (Mitsubishi Electric Corporation) ASJ7J9-S (Mitsubishi Electric Corporation) Type C00HW-JM (OMON Corporation) NJ-JPCN- (Fuji Electric Co., Ltd.) NPL-JP (Fuji Electric Co., Ltd.) No. of output points, points CC-Link System Master unit : AJBT Master unit : ASJBT Master unit : AJQBT Master unit : ASJQBT No. of output points, points a) -wire type Cable wiring Transmission line supply supply supply supply V V V V V V V V Master station S B A b) -wire type Master station S B A Slave unit (S unit) S BA Twisted pair wire with shield Slave unit (S unit) S BA Twisted pair wire with shield Slave unit (S unit) S BA Slave unit (S unit) S BA Slave unit (S unit) S BA Slave unit (S unit) S BA Terminal resistor Master unit SI unit SI unit A A A B B B SL Twisted pair wire with shield Type ground Type ground Terminal resistor Type ground --8
side Circular Connector How to Order Valve Manifold Assembly Ordering example (000) Manifold S-WC-0B-C ( set) ouble solenoid 00-F ( sets) side Stations Single solenoid 00-F ( sets) S-WC-0B-C set (manifold part no.) 00-F sets (Single solenoid part no.) 00-F sets (ouble solenoid part no.) J How to Order Solenoid Valves 00 F Note) Note) Available with manifold block for station additions. efer to pages --89 and --9. 000 000 000 000 : Non-locking push type : Push-turn locking slotted type position single solenoid position double solenoid position closed center position exhaust center position pressure center A position dual port valve: N.C./N.C. B position dual port valve: N.O./N.O. C position dual port valve: N.C./N.O. position dual port valves are applicable to 000 and 000 only. Internal pilot External pilot is not available for position dual port valves. Back pressure check valve None K Built-in Built-in back pressure check valve type is applicable to series 000 only. Back pressure check valve is not available for position closed center and position pressure center. ated voltage VC VC efer to Precautions on page --9. --7
side -sub Connector How to Order Valve Manifold Assembly Ordering example (000) Manifold S-F-0B-C ( set) ouble solenoid 00-F ( sets) Single solenoid 00-F ( sets) side S-F-0B-C set (manifold part no.) 00-F sets (Single solenoid part no.) 00-F sets (ouble solenoid part no.) Stations J How to Order Solenoid Valves 00 F Note) Note) Available with manifold block for station additions. efer to pages --89 and --9. 000 000 000 000 : Non-locking push type : Push-turn locking slotted type position single solenoid position double solenoid position closed center position exhaust center position pressure center A position dual port valve: N.C./N.C. B position dual port valve: N.O./N.O. C position dual port valve: N.C./N.O. position dual port valves are applicable to 000 and 000 only. Internal pilot External pilot is not available for position dual port valves. ated voltage VC VC Back pressure check valve None K Built-in Built-in back pressure check valve type is applicable to series 000 only. Back pressure check valve is not available for position closed center and position pressure center. efer to Precautions on page --9. --7
Flat ibbon Cable Connector How to Order Valve Manifold Assembly Ordering example (000) Manifold S-P-0B-C ( set) ouble solenoid 00-F ( sets) Single solenoid 00-F ( sets) side Stations A B 00 F 000 000 000 000 side position single solenoid position double solenoid position closed center position exhaust center position pressure center position dual port valve: N.C./N.C. position dual port valve: N.O./N.O. position dual port valve: N.C./N.O. C position dual port valves are applicable to 000 and 000 only. Internal pilot External pilot is not available for position dual port valves. How to Order Solenoid Valves S-P-0B-C set (manifold part no.) 00-F sets (Single solenoid part no.) 00-F sets (ouble solenoid part no.) ated voltage VC VC Back pressure check valve Note) Available with manifold block for station additions. efer to pages --89 and --9. : Non-locking push type : Push-turn locking slotted type Note) None K Built-in Built-in back pressure check valve type is applicable to series 000 only. Back pressure check valve is not available for position closed center and position pressure center. efer to Precautions on page --9. J A, B port size (Metric) A, B port size (Inch) Symbol C A, B port fitting for ø. P, E port Applicable series Symbol N A, B port C fitting for ø 000 N fitting for ø8 C fitting for ø N7 C fitting for ø N C fitting for ø 000 N7 fitting for ø0 C8 fitting for ø8 N9 C fitting for ø N7 C8 fitting for ø8 000 N9 fitting for ø C0 fitting for ø0 N C8 fitting for ø8 N9 C0 fitting for ø0 N fitting for ø C fitting for ø 0N 0 c / 000 0N c /8 0 c /8 0T 0F / 0T NPTF /8 /8 0F /8 M M A, B ports mixed fitting for ø/8" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/" fitting for ø/8" fitting for ø/" fitting for ø/8" NPT / NPT /8 NPTF / P, E port Applicable series fitting for ø/" fitting for ø/8" fitting for ø/8" fitting for ø/8" NPT /8 NPTF /8 A, B ports mixed 000 000 000 000 In the case of mixed specifications (M), indicate separately on the manifold specification sheet. Port sizes of X, PE port for external pilot specification (, S) are ø (metric), ø/" (inch) for 000/000 and ø(metric) and ø/" (inch) for 000/000. --77
How to order cassette base type solenoid valves with manifold block [ 000/000] Type with manifold block is used when adding stations, etc. 00 F 000 000 position single solenoid position double solenoid position closed center position exhaust center position pressure center A position dual port valve: N.C./N.C. B position dual port valve: N.O./N.O. C position dual port valve: N.C./N.O. Manifold block type C : Non-locking push type Manifold wiring specifications S A, B port size efer to A, B ports size tables on pages --0,,, and 7. ouble wiring Single wiring Cassette base type with manifold block : Push-turn locking slotted type J Internal pilot External pilot is not available for position dual port valves. Back pressure check valve None K Built-in Back pressure check valve is not available for position closed center and position pressure center. Built-in back pressure check valve type is applicable to series 000 only. efer to Precautions on page --9. ated voltage VC VC Note that serial wiring manifolds (EX00, EX0) are only available with VC. Example (000) 00-F-C-C --89
/, /8 thread type port block assembly For A, B port 9000 8A 0 0 For P, E port 9000 8B 0 B A Thread type F N T c NPT NPTF Note ) Be careful to avoid damage or contamination of O-rings, as this can cause air leakage. Note ) When removing a fitting assembly from a valve, after removing the clip, attach tubing or a plug (KQP- ) to the fitting, and pull it out while holding the tubing (or plug). If it is pulled out while holding the release button of the fitting assembly (resin part), the release button may be damaged. However, 0 and 0 port block assemblies should be pulled out as they are. Note ) Be sure to shut off the power and air supplies before disassembly. Furthermore, since air may remain inside the actuator, piping and manifold, confirm that the air is completely exhausted before performing any work. Clip P B B B B O-ring Fitting assembly J How to order tie-rod type 0 solenoid valves with manifold block [ 000 to 000] Type with manifold block is used when adding stations, etc. 00 F 000 000 000 000 position single solenoid position double solenoid position closed center position exhaust center position pressure center A position dual port valve: N.C./N.C. B position dual port valve: N.O./N.O. C position dual port valve: N.C./N.O. position dual port valves are applicable to 000 and 000 only. Internal pilot External pilot is not available for position dual port valves. Back pressure check valve None K Built-in Built-in back pressure check valve type is applicable to series 000 only. Back pressure check valve is not available for position closed center and position pressure center. efer to Precautions on page --9. ated voltage VC VC : Non-locking push type Note that serial wiring (EX00, EX0 and EX0) are only available with VC. Manifold wiring specifications S ouble wiring Single wiring Manifold block type For Tie-rod base type 0 with T manifold block Note) Tie-rod type 0 includes tie-rods for station additions. A, B port size efer to A, B port size table on pages --0,,, and 7. : Push-turn locking slotted type Example (000) 00-F-T-C --9
000/000/000/000 Single Valve/Sub-plate Type IP7 Compliant position single solenoid position double solenoid (EA) (P)(EB) (EA) (P)(EB) position closed center (EA) (P)(EB) position exhaust center (EA) (P)(EB) position pressure center Internal pilot External pilot ated voltage How to Order 00 W 000 000 000 000 is not available for position dual port valves. VC VC M waterproof connector Symbol Cable length (mm) W 00 W 00 W 000 W 000 W7 000 Thread type F N T c NPT NPTF Port size Symbol Port size Applicable series Without sub-plate 0 /8 000 0 / 000 000 0 /8 000 000 0 / 000 Non-locking push type Push-turn locking slotted type (EA) (P)(EB) A B C position dual port valve: N.C./N.C. SOL.a position dual port valve: N.O./N.O. SOL.a position dual port valve: N.C./N.O. SOL.a (EA) (EA) (EA) SOL.b (P) SOL.b (P) SOL.b (P) (EB) (EB) (EB) 000 and 000 are not available with dual port valve. --00
Single Valve/Sub-plate Type IP7 Compliant Solenoid Valve Specifications Fluid Internal pilot position single operating position dual port valve pressure range position double (MPa) position External pilot Operating pressure range operating pressure range position single, double (MPa) position Ambient and fluid temperature ( C) Max. operating position single, double frequency position dual port valve (Hz) position Internal pilot Pilot exhaust method External pilot Lubrication Mounting orientation Impact/Vibration resistance (ms ) Enclosure Electrical entry Coil rated voltage Allowable voltage fluctuation consumption (W) Surge voltage suppressor Indicator light esponse Time position single position double position position dual port valve Note) Based on dynamic performance test, JIS B 87-98. (Coil temperature: 0 C, at rated voltage) Air 0. to 0.7 0. to 0.7 0. to 0.7 00 kpa to 0.7 0. to 0.7 0 to 0 (No freezing. efer to page -7-.) Non-locking push type Push-turn locking slotted type Common exhaust type for main and pilot valve Pilot valve individual exhaust Not required nrestricted 0/0 (8. to 000 Hz) IP7 (Based on IEC9) M waterproof connector VC, VC ±0% of rated voltage 0. (With indicator light: 0.) Zener diode LE Note) Impact resistance: No malfunction occurred when it is tested with a drop tester in the axial direction and at the right angles to the main valve and armature in both energized and de-energized states every once for each condition. (Values at the initial period) Vibration resistance: No malfunction occurred in a one-sweep test between 8. and 000 Hz. Test was performed at both energized and de-energized states in the axial direction and at the right angles to the main valve and armature. (Values at the initial period) esponse time (ms) (at the pressure of 0. MPa) 000 or less 0 or less 8 or less or less 000 or less 7 or less 9 or less or less 000 8 or less or less or less 000 0 or less 0 or less 8 or less J M Waterproof Connector Wiring Specifications Single solenoid ouble solenoid pins connector (M) plug pins connector (M) plug (COM) (COM) Solenoid Solenoid A Solenoid B Circuit diagram Solenoid valve side pin wiring diagram Circuit diagram Solenoid valve side pin wiring diagram Note) Solenoid valves have no polarity. --0
Flow Characteristics/Weight 000 Valve model position Single ouble Flow characteristics () Port size / (P A/B) / /(A/B EA/EB) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv 00- -0 position Closed center Exhaust center c /8 0.77 0.7 0.8 0. 0.8 0.8 Pressure center. [0.] 0. [0.] 0.9 [0.] position dual N.C./N.C. 0.8 0. 0.8 N.O./N.O. 0.87 0. 0. Note ) [ ]: enotes the normal position. Note ) ( ): enotes without sub-plate..0 0.0 0.. 0.8. [0.] 0.89. 0.77 0.0 0. 0.0 0.9 0. [0.] 0. [0.] 0.7 0. 0.9 0.9 0. 0. Weight (g) () M waterproof connector (Cable length 00 mm) (88) 8 (9) 0 (9) 8 (9) 000 Flow characteristics () Valve model Port size / (P A/B) / /(A/B EA/EB) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv 00- -0 position position Single ouble Closed center Exhaust center Pressure center c /..8.. [0.8] 0. 0.7 0. 0. [0.0] 0. 0.0 0. 0.8 [0.8].8.8.0 [.].8 0.9 0.0 0. [0.8] 0.0 0. 0.7 0.7 [0.7] 0.8 position dual N.C./N.C.. 0.0 0.. 0. 0.0 N.O./N.O..7 0. 0.7. 0. 0. Note ) [ ]: enotes the normal position. Note ) ( ): enotes without sub-plate. Weight (g) () M waterproof connector (Cable length 00 mm) 9 (9) (00) 8 (0) (00) 000 Flow characteristics () Valve model Port size / (P A/B) / /(A/B EA/EB) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv position Single ouble. 0... 0.9.0 00- -0 Closed center c /.0 0. 0.80. 0. 0.7 position Exhaust center. 0. 0.7.7 [.7] 0. [0.8]. [0.9] position Pressure center Single ouble. [.].9 0.9 [0.9] 0.9. [0.]... 0.9 0.7 0.. 00- -0 Closed center c /8.0 0.0 0.80. 0. 0.7 position Exhaust center Pressure center.. [.] 0. 0. [0.] 0.7. [0.].8 [.7]. 0. [0.8] 0.. [0.] 0. Note ) [ ]: enotes the normal position. Note ) ( ): enotes without sub-plate. Weight (g) () M waterproof connector (Cable length 00 mm) 0 () () () 8 000 Flow characteristics () Valve model Port size / (P A/B) / /(A/B EA/EB) C [dm /(s bar)] b Cv C [dm /(s bar)] b Cv position Single ouble 7.9 0..0 9. 0.. 00- -0 Closed center c /8 7. 0. position position Exhaust center Pressure center Single ouble 7. [.] 8.0 0. 0. [0.] 0.8 00- -0 Closed center c / 7. 0. position Exhaust center Pressure center 7. [.] 0. 0. [0.] Note ) [ ]: enotes the normal position. Note ) ( ): enotes without sub-plate..8.7.8 [0.8]..8.0. [0.9] 7. 0.0 [.0] 0. [0.].7 0.0 0 0.9 7. 0. [.7] 0. [0.] 7. 0..7.8 [0.9].9..8. [.].9 Weight (g) () M waterproof connector (Cable length 00 mm) 0 (08) 09 () 0 () 8 88 09 --0