HV gate valve with protective ring Series 17 Main applications Isolation valve for contaminating processes Ordering information Series 17., Valve with manual actuator turning handle Ordering numbers ISO-F metric threads UNF threads 1½ 1732-E01 1732-E01 1732-UE01 2 173-E01 on request on request with position indicator: 17.. -. E0 Series 17., Valve with pneumatic actuator single acting with closing spring (N) with solenoid valve with position indicator Series 17., Valve with pneumatic actuator double acting with solenoid valve with position indicator Series 17.2, 3 320 Valve with manual actuator handwheel 1½ 1732-E1 1732-E1 1732-UE1 2 173-E1 on request on request without solenoid valve, without position indicator: 17.. -. E11 without solenoid valve, with position indicator: 17.. -. E21 with solenoid valve, without position indicator: 17.. -. E31 ( 31 / 1 specify control voltage) 1½ 1732-E 1732-E 1732-UE 2 173-E on request on request without solenoid valve, without position indicator: 17.. -. E1 without solenoid valve, with position indicator: 17.. -. E2 with solenoid valve, without position indicator: 17.. -. E3 ( 3 / specify control voltage) Ordering numbers ISO-F metric threads UNF threads S-LP JIS 3 1723-PE01 1723-E01 1723-UE01 1723-TE01 1723-JE01 172-PE01 172-E01 172-UE01 172-TE01 172-JE01 10 172-PE01 172-E01 172-UE01 172-TE01 172-JE01 172-PE01 172-E01 172-UE01 172-TE01 172-JE01 2 10 on request on request on request on request on request 320 12 on request on request on request on request on request with position indicator: 172.. -. E0 with lever (instead of handwheel): 172.. -. E0 Further ordering information on next page 90 www.vatvalve.com 1
Features ody material: stainless steel Long lifetime even under contaminating conditions Protective ring Easy to service: fast exchange of gate seal Functional principle open Functional principle 3 closed Series 17 1 Protective ring 3 Gate seal 5 Port for gas purge or pumping (option) 2 Gas purge Gate Valve seat side Technical data 1) Maximum values: depending on operating conditions and sealing materials Leak rate: valve body, valve seat < 1 10-9 mbar Is -1 Pressure range ifferential pressure on the gate ifferential pressure at opening 1 10 - mbar to 2 bar (abs) 2 bar 30 mbar ycles until first service 00 3 000 Temperature 1) Valve body - - 3 0 Manual actuator Pneumatic actuator Solenoid valve Position indicator Heating and cooling rate h -1 Further technical data on next page ontinued Ordering information Series 17.2, 3 320 Valve with pneumatic actuator double acting with solenoid valve with position indicator Ordering numbers (specify control voltage) ISO-F metric threads UNF threads S-LP JIS 3 1723-PE 1723-E 1723-UE 1723-TE 1723-JE 172-PE 172-E 172-UE 172-TE 172-JE 10 172-PE 172-E 172-UE 172-TE 172-JE 172-PE 172-E 172-UE 172-TE 172-JE 2 10 on request on request on request on request on request 320 12 on request on request on request on request on request without solenoid valve, without position indicator: 172.. -. E1 without solenoid valve, with position indicator: 172.. -. E2 with solenoid valve, without position indicator: 172.. -. E3 (specify control voltage) 1 www.vatvalve.com 91
HV gate valve with protective ring Series 17 ontinued Technical data Material Valve body, flange ISI 30 (1.301), ISI 31L (1.35) Mechanism (main components) ISI 30 (1.301), ISI 31L (1.) Seal onnet - metal - 3 FM (Viton ) Gate FM (Viton ) Feedthrough bellows 3 rotary feedthrough with intermediate pumping Mounting position Solenoid valve any 2 V, 2.5 W (others on request) Position indicator: contact rating Voltage 2 V V / urrent 2 3 Valve position indication visual (mechanical) Valve with manual actuator Valve with pneumatic actuator (nominal I..) Standard flanges onductance (molecular flow) (depending on dimension and flange type) Weight with turning handle Weight with handwheel Weight with lever ompressed air min. max. overpressure Volume of pneumatic actuator losing or opening time Weight ls -1 kg lbs kg lbs bar psi l ft 3 s kg lbs 1½ See pages 9 97 2.3 5.1 5 7 73 102 0.0 0.002 1 3. 2 2.5 5.5 5 7 73 102 0.0 0.002 1 3.1. 3 2½ 35 11 2 9 20 7 5 102 0.13 0.005 1.5 11 2 1 7 17 3 33 7 5 102 0.13 0.005 1.5 17 3 10 5 30 2 2 7 5 102 0.2 0.01 2.5 31 12 39 37 2 7 5 102 0.2 0.01 2.5 39 Options ia. 1 Standard: 1 Options: 2 / 3 / 1 / 2 / 3 ctuator Solenoid valve for impulse actuation: last valve position is maintained at power failure Solenoid valve separate, for external mounting Other solenoid valve voltage (standard: 2 V ) Pneumatic actuator of 3 mountable in positions (ia. 1): - position 1, 2, 3 on -side (valve seat side): to be specified with order - position 1, 2, 3 on -side (rear side): to be specified with order ouble position indicator (2 switches each for the positions «open» and «closed») 92 www.vatvalve.com 1
ia. 2 Valve ustomer specified flanges with / without watercooling For direct mounting to flat chamber: special flange for mounting to chamber wall, standard flange on opposite side Heat-resistant mechanism Ports for roughing (by-pass), venting or for gauges (ia. 2) - 3 : possible in positions 1, 2, 1, 2, F1 and F2 - : positions on request Series 17 valve Recoended port ISO-F oder Y Z Other ports on request 1½ VR ¼ 5 1.77 79. 3.13 2 VR ¼ 5 1.77 79. 3.13 3 1 ⅝ 1 5.75 20 0.79 30 1.1 1½ 1 7.2 20 0.79 7. 1.7 10 1½ 25 9.5 20 0.79 59 2.32 1½ 30. 11.9 20 0.79 Ordering information for options: Ordering No. of valve- (e. g. 172-PE-, = port ISO-F in position F2) Spare parts Seals on request (specify fabrication number of valve) ccessories Flange connections for installation of the valve: see series 31, 32 and 33 imensions Valve with manual actuator: turning handle (1½" 2") Valve with pneumatic actuator: single acting with closing spring (N) (1½" 2") Valve with pneumatic actuator: double acting (1½" 2") T = 1.5 (1.3") P =.2 (") T = 32.5 (1.2") P =.2 (") b ompressed air connection e Mechanical position indication g Required for dismantling c Electrical connection h Emergency operation 1 www.vatvalve.com 93
HV gate valve with protective ring Series 17 Main dimensions Valve with manual actuator: handwheel 3 (2½" ") Valve with manual actuator: lever 3 (2½" ") Flange dimensions: see pages 9 97 M N O O1 P Q R R1 S T T1 U V W Y 3 51 2.01 1 5.9 211.31 2 5.9 13 5.2 1 7.09 1 5.75 33 1.30 30 1.1 3 2. 2 10.3 7. 172.77 220. 129 5.0 312 12.2 7 3.07 1 7.2 33 1.30 7. 1.7 129 5.0 312 12.2 7 3.07 10 7 2.91 279 10.9 31 1.21 252 9.92 222.7 300 11.1 25 9.5 1.57 59 2.32 2.0 125.92 10..32 3 13.7 9 3. 10.09 77 3.03 35 1 1 17.3 30 11.97 27 10.79 3 13.7 305 12.01 1.57 7. 2. 125.92 10..32 352 13. 9 3. 10.09 g Required for dismantling e Mechanical position indication Standard actuator position Optional actuator positions L M N O O1 P Q R S T T1 V Y 3 51 2.01 27 10.7 1 5.9 211.31 2 5.9 13 5.2 1 7.09 1 5.75 30 1.1 3 2. 3 12. 2 10.3 7. 172.77 220. 120.72 9 3.7 1 7.2 7. 1.7 120.72 9 3.7 10 7 2.91 55 17.91 279 10.9 31 1.21 252 9.92 222.7 300 11.1 25 9.5 59 2.32 7. 2. 13 5.3 13 5.3 10.09 77 3.03 5 20.2 35 1 1 17.3 30 11.97 27 10.79 3 13.7 305 12.01 7. 2. 13 5.3 13 5.3 10.09 9 www.vatvalve.com 1
Main dimensions Valve with pneumatic actuator: double acting 3 (2½" ) Valve with pneumatic actuator: double acting 10 (" ") Series 17 L M N O O1 P Q R R1 S T U V W b ompressed air connection e Mech. position indication Standard actuator position g Required for c Electrical connection Optional actuator positions dismantling Flange dimensions: see pages 9 97 3 51 2.01 37 1.5 1 5.9 211.31 2 5.9 13 5.2 1 7.09 1 5.75 33 1.30 30 1.1 2.0 135 5.31 221. 7 3.07 3 2..9 2 10.3 7. 172.77 220. 1 7.2 33 1.30 7. 1.7 2.0 135.20 5.32 221. 7 3.07 L M N O O1 P Q R R1 S T T1 U V W 10 7 2.91 35 17.13 279 10.9 31 1.21 252 9.92 222.7 300 11.1 25 9.5 1.57 59 2.32 2.0 3. 9.2 7. 77 3.03 95 19.9 35 1 1 17.3 30 11.97 27 10.79 3 13.7 305 12.01 1.57 7. 2. 7 3.3 9.2 7. 1 www.vatvalve.com 95
HV gate valve with protective ring Series 17 Flange dimensions ISO-F Series 17.: (1½" 2") 1. ½ ISO-F 2 1. ½ 2 1.97 on request E 72 2.3. 1.59 3 1.2 1.30 1.3 72 2.3 1.97 3 1.2 52.30 2.0 72 2.3 5. 2.31 3 1.2 E F 1) M Series 17.: (1½") E F 2) F G H H1 H2 1) Metric threads 2) UNF threads 3 0.12 55 2.17 9 3.7 25 0.9 3 0.12 75 2.95 9 3.7 25 0.9 ¼" 2 UNF 7 0.2.30 1.90 2 1.5 17. 0.9 ISO-F Series 17.2: 3 (2½" ") 3 2. ½ 10 130 5.12 110.33. 5.71 225. 0 5.91 2 11.22 20 10.2 E F M M M10 12 M10 G H I 13 0.51 13 0.51 102.02 3 0.12 3.02 5 0.20 213.39 5 0.20 9 www.vatvalve.com 1
Flange dimensions Series 17 Series 17.2: 3 (2½" ") 3 2. ½ 10 O... ½ 10 113..7 1.0 5.97 202. 7.97 253.20 9.97 92.10 3.3 130.20 5.13 11 7.13 231. 9.13 0 5.91 E F 1) M 1 M 20 M 2 M E F 2) 5 / 1" 2 UNF 1 5 / 1" 2 UNF 20 5 / 1" 2 UNF 2 5 / 1" 2 UNF 1) Metric threads 2) UNF threads H1 2. 3.25 120..75 171.5.75 222..7 H2 77. 3.05 1..55 1.5 217.5 S-LP Series 17.2: 3 (2½" ") with or without O-ring groove For orders with O-ring groove specify:, or «+» JIS 2290: 199 / ISO 109 Series 17.2: 5 (2½" ") 5 13 5.35 120.72 1 7.2 10.30 0 235 9.25 210.27 0 5.91 300 11.1 2 10.3 E F M10 M10 M10 M12 G 3 2. ½ 12 0.7 12 0.7 10 12 0.7 S-LP 2 3 E F G H O-ring I.. d 2. 120..75 ⅜" 1 UN.90 3..9 3.53 3..139. 7. 2. ⅜" 1 UN 120.5.75 120.2 3.53.73.139 225.. 7. 0 5.91 ⅜" 1 UN.75.25.3 3.53.23.139 279. 11 21.30 9. ¾" 10 UN 19 0.75 20..13 202.79 3.53 7.9.139 1 www.vatvalve.com 97