Ditcher DT35 33328 324-099P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2018 Printed 07/10/18 Cover photo may show optional equipment not supplied with standard unit.
Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frame...6 Ditcher Frame DT35...6 Ripper Components...8 Skid Shoe Components...10 Section 3: Drive...12 Drive Assembly...12 Impeller Components...14 Section 4: Driveline...16 Driveline (826-717C)...16 Section 5: Decals...18 Decal Placement...18 Touch-up Paints...20...22 Copyright 2018. All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 DT35 Ditcher 324-099P 07/10/18
D I L R S Decal Placement...18 Ditcher Frame DT35...6 Drive Assembly...12 Driveline (826-717C)...16 Impeller Components...14 Touch-up Paints...20 Ripper Components...8 Skid Shoe Components...10 Alphabetized Table of Contents 07/10/18 DT35 Ditcher 324-099P 3
4 DT35 Ditcher 324-099P 07/10/18
07/10/18 DT35 Ditcher 324-099P 5
Ditcher Frame DT35 Section 2: Frame 33329 6 DT35 Ditcher 324-099P 07/10/18
Ditcher Frame DT35 Section 2: Frame Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. dwg33329 311-101H 311-101H82 311-101H83 322-009D 324-093H 324-093H82 324-093H83 324-154D 802-017C 802-068C 802-224C 803-014C 803-027C 803-255C 804-007C 804-012C 804-013C 804-023C 805-065C 805-103C 805-407C 816-504C Drawing Image Number PARKING STAND RTA25/35 PARKING STAND RTA25/35 ORANGE PARKING STAND RTA25/35 RED SPACER 1 1/4ODX7/32WLX12LG FRAME WELD DT35 FRAME WELD DT35 ORANGE FRAME WELD DT35 RED SHIELD SHEAR BOLT HHCS 3/8-16X1 GR5 HHCS 3/4-10X4 GR5 HHCS 1/4-20X1 1/4 GR5 NUT HEX 3/8-16 PLT NUT HEX 3/4-10 PLT NUT HEX NYLOCK 1/4-20 WASHER FLAT 1/4 SAE PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER LOCK SPRING 3/4 PLT PIN WIRE RETAINING 1/4 X 1 3/4 PIN LINCH 7/16 X 1 3/4 PIN HITCH CAT. I-II MANUAL STORAGE CONTAINER 07/10/18 DT35 Ditcher 324-099P 7
Ripper Components Section 2: Frame 33331 8 DT35 Ditcher 324-099P 07/10/18
Ripper Components Section 2: Frame Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 dwg33331 324-097K 324-150D 324-151D 324-152D 324-162D 802-034C 802-038C 802-258C 802-682C 803-169C 803-209C 820-008C Drawing Image Number SHANK ASSY RIPPER MNT RH RIPPER MNT LH RIPPER SHANK RIPPER ANCHOR HHCS 1/2-13X1 1/4 GR5 HHCS 1/2-13X2 1/4 GR5 HHCS 1/2-13X1 GR5 PLOW 3/8-16X2 1/2 GR5 BLK NUT HEX FLG LOCK 1/2-13 PLT NUT FLANGE LOCK 3/8-16 PLT DANISH TINE TOOTH 1 1/2 WIDE 07/10/18 DT35 Ditcher 324-099P 9
Skid Shoe Components Section 2: Frame 33332 10 DT35 Ditcher 324-099P 07/10/18
Skid Shoe Components Section 2: Frame Ref. Part No. Part Description Comments Revision 5. 6. dwg33332 324-092H 324-149D 802-045C 803-019C 805-032C 805-381C Drawing Image Number SKID SHOE WELD SKID ADJ BAR HHCS 1/2-13X5 GR5 NUT LOCK 1/2-13 PLT PIN HAIR COTTER.148 WIRE PIN CLEVIS 1/2X1 1/4 PLT 07/10/18 DT35 Ditcher 324-099P 11
Drive Assembly Table of Contents Section 3: Drive 33334 12 DT35 Ditcher 324-099P 07/10/18
Section 3: Drive Drive Assembly Table of Contents Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 20. 2 2 2 2 25. 26. 27. 27. 28. 29. 30. 3 Dwg 33334 311-200D 324-104H 324-105K 324-148D 324-153D 411-609D 800-066C 800-074C 800-306C 800-066C 802-286C 802-392C 803-020C 803-022C 803-023C 803-181C 804-015C 804-022C 808-317C 808-435C 809-305C 809-303C 815-378C 815-379C 816-704C 816-705C 816-706C 821-045C 822-283C 822-264C 822-284C 822-285C 826-717C 827-007C Drawing Image Number CHAIN TIGHTNER PIVOT RTA25/35 TIGHTENER WELD TIGHTENER BUNDLE ACCESS COVER SPACER SPROCKET KEY 1/2 X 1/2 X 2 DRAIN PLUG 3/4-16 UNF PLATED SNAP RING EXT.543.050T FILL PLUG VENTED 3/4-16 PLT DRAIN PLUG 3/4-16 UNF PLATED HHCS 5/8-11X4 GR5 FTHD HHCS 3/4-10X1 3/4 GR5 NUT HEX 1/2-13 PLT NUT HEX 5/8-18 PLT NUT HEX JAM 5/8-11 PLT NUT HEX FLANGE LOCK 3/4-10 PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK SPRING 5/8 PLT SPKT 8OSER11T WITH BRG SPKT 80B13 2" BORE W/KEY&SET CHAIN RL #80HR -54 PITCH W/CON RPBY 809-305C SHAFT TOP DT35 SHAFT LOWER DT35 O-RING 917IDX195ODX.139 O-RING 818IDX024ODX.103 GASKET FLANGETTE GRS SHELL GADUS S2 V22000 32OZ BRG W/FLG 00ID 4-BOLT RPBY 822-283C FLANGETTE 100MM 4-BOLT RD PLT BRG 00IDX937OD LOCK DRVLN, DITCHER 2100 SHEAR DT35 G.W. SPACER TUBE-SHORT S/N 767296+ S/N 767295- S/N 767296+ S/N 767295- S/N 767296+ S/N 767295-07/10/18 DT35 Ditcher 324-099P 13
Impeller Components Section 3: Drive 33333 14 DT35 Ditcher 324-099P 07/10/18
Impeller Components Section 3: Drive Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. dwg33333 324-091H 324-094K 802-082C 802-106C 803-020C 803-169C 804-015C 820-455C Drawing Image Number ROTOR WELD ROTOR HHCS 1/2-13X1 3/4 GR5 RHSNB 1/2-13X1 1/2 GR5 NUT HEX 1/2-13 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER LOCK SPRING 1/2 PLT DITCHER BLADE 07/10/18 DT35 Ditcher 324-099P 15
Driveline (826-717C) Section 4: Driveline 33336 16 DT35 Ditcher 324-099P 07/10/18
Driveline (826-717C) Section 4: Driveline Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 25. 26. 27. 28. 29. 30. 3 3 3 3 35. dwg33336 826-717C 14026.541 180.016.130 15016.028.1 190.000.018 180.016.316 15170.2630710 15160.174 190.000.016 15016.029.1 14260.055.1 180.016.237 180.01240 180.016.238 180.016.636 14260.4997621 190.000.451 15016.486 180.016.487 180.016.483 190.000.078 15016.258.1 190.000.023 165.000.576 15016.838.1 165.000.511 190.000.021 N/A 12026.12611 14266.2757621 14262797621 12360.468.11 12460.10211 190.000.098 190.000.099 165.000.628 Drawing Image Number DRVLN, DITCHER 2100 SHEAR DT35 * CO COMPLETE COLLAR YOKE C12 COMER CROSS ASSEMBLY CO OUTER YOKE CO ROLL PIN OUTER TUBE CO BUSH WITH GREASE FITTING CO COMPLETE OUTER TUBE CO INNER TUBE COMER ROLL PIN, INNER TUBE CO INNER YOKE CO COMPLETE SHEAR BOLT(46XM1O) CO GRD RETAIN CLLR FOR OTR TB COMER BOLT CO GRD RETAIN CLLR FOR INR TB CO SAFETY CHAINS CO COMPLETE GRD W/INSTR. MNL COMER OUTER CIRCLIP COMER SLIDING SLEEVE COLLER COMER SPRING COMER FIXED SLEEVE COMER BALL 1/2" CO YOKE FOR HUB B02 (46XM10) CO BALL DIA 5/16" CO BOLT & NUT M16X2X80 C8.8 CO HUB B02 (46XM10) CO BOLT M10X55 C8.8 AND NUT CO GREASE FITING M10X1 CO U JOINT FOR OUTER TUBE CO U JOINT FOR INNER TUBE CO HALF FEMALE GUARD CO HALF MALE GUARD COMER HALF FEMALE SHFT W/GUARD CO HALF MALE SHFT W/GUARDING COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER COLLOR KIT 1-3/8 YOKE (S/N 940014-) 07/10/18 DT35 Ditcher 324-099P 17
Decal Placement Table of Contents Section 5: Decals 33335 18 DT35 Ditcher 324-099P 07/10/18
Decal Placement Section 5: Decals Ref. Part No. Part Description Comments Revision 5. 6. 7. 7. 8. 9. 10. 1 1 1 Dwg 33335 818-130C 818-190C 818-205C 818-543C 818-552C 818-719C 818-897C 848-159C 838-287C 838-295C 838-415C 838-517C 848-737C 848-808C Drawing Image Number DECAL CAUTION 540 RPM DECAL FLAG DECAL WARNING MOVING PARTS HAZ DECAL DANGER PD GUARD MISS SML DECAL DANGER PTO DRIVELINE DECAL CAUTION GENERAL INSTR RPBY 848-159C DECAL LANDPRIDE 10" BROWN/GOLD DECAL THROWN OBJECT DITCHER DECAL ROTATNG BLADE DT55 SW407 DECAL SHELL GADUS S2 V220 00 DECAL QUICK HITCH SYSTEM DECAL DT35 GOLD RPBY 848-737C Beige Unit Orange Unit & Red Unit Obsolete 07/10/18 DT35 Ditcher 324-099P 19
Touch-up Paints Section 5: Decals No diagram associated with this Parts List 20 DT35 Ditcher 324-099P 07/10/18
Touch-up Paints Section 5: Decals Ref. Part No. Part Description Comments Revision 821-011C 821-070C 821-054C 821-058C 821-066C 821-067C 821-080C 821-011CTU 821-070CTU 821-054CTU 821-058CTU 821-066CTU 821-067CTU 821-080CTU 821-011CQT 821-070CQT 821-054CQT 821-058CQT 821-066CQT 821-067CQT 821-080CQT 821-011CGL 821-070CGL 821-054CGL 821-058CGL 821-066CGL 821-067CGL 821-080CGL LP BEIGE SPRAY CAN GLOSS BLACK SPRAY CAN MED. RED SPRAY TRCK/CTR GREEN SPRAY CUTTERS ORANGE SPRAY CAN BLUE SPRAY CAN PAINT ALUMINUM/ZINC SPRAY CAN LP BEIGE TOUCH-UP 5OZ GLOSS BLACK TOUCH-UP 5OZ MED RED TOUCH-UP 5OZ GREEN TOUCH-UP 5OZ ORANGE TOUCH-UP 5OZ BLUE TOUCH-UP 5OZ PAINT ALUMINUM/ZINC TOUCH UP LP BEIGE QUART GLOSS BLACK QUART MED RED QUART GREEN QUART ORANGE QUART BLUE QUART PAINT ALUMINUM/ZINC QUART LP BEIGE GALLON GLOSS BLACK GALLON MED RED GALLON GREEN GALLON ORANGE GALLON BLUE GALLON PAINT ALUMINUM/ZINC GALLON Spray can Spray can Spray can Spray can Spray can Spray can Spray can Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Quart can Quart can Quart can Quart can Quart can Quart can Quart can Gallon can Gallon can Gallon can Gallon can Gallon can Gallon can Gallon can 07/10/18 DT35 Ditcher 324-099P 21
The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page 12026.12611...17 12360.468.11...17 12460.10211...17 14026.541...17 14260.4997621...17 14262797621...17 14266.2757621...17 14260.055.1...17 15016.028.1...17 15016.029.1...17 15016.258.1...17 15016.486...17 15016.838.1...17 15170.2630710...17 15160.174...17 165.000.511...17 165.000.576...17 165.000.628...17 180.01240...17 180.016.130...17 180.016.237...17 180.016.238...17 180.016.316...17 180.016.483...17 180.016.487...17 180.016.636...17 190.000.016...17 190.000.018...17 190.000.021...17 190.000.023...17 190.000.078...17 190.000.098...17 190.000.099...17 190.000.451...17 311-101H...7 311-101H82...7 311-101H83...7 311-200D...13 322-009D...7 324-091H...15 324-092H...11 324-093H...7 324-093H82...7 324-093H83...7 324-094K...15 324-097K...9 324-104H...13 324-105K...13 324-148D...13 324-149D...11 324-150D...9 324-151D...9 324-152D...9 324-153D...13 324-154D...7 324-162D...9 411-609D...13 800-066C...13 800-074C...13 800-306C...13 802-017C...7 802-034C...9 802-038C...9 802-045C...11 802-068C...7 802-082C...15 802-106C...15 802-224C...7 802-258C...9 802-286C...13 802-392C...13 802-682C...9 803-014C...7 803-019C...11 803-020C...13, 15 803-022C...13 803-023C...13 803-027C...7 803-169C...9, 15 803-181C...13 803-209C...9 803-255C...7 804-007C...7 804-012C...7 804-013C...7 804-015C...13, 15 804-022C...13 804-023C...7 805-032C...11 805-065C...7 805-103C...7 805-381C...11 805-407C...7 808-317C...13 808-435C...13 809-303C...13 809-305C...13 815-378C...13 815-379C...13 816-504C...7 816-704C...13 816-705C...13 816-706C...13 818-130C...19 818-190C...19 818-205C...19 818-543C...19 818-552C...19 818-719C...19 818-897C...19 820-008C...9 820-455C...15 821-011C...21 821-011CGL...21 821-011CQT...21 821-011CTU...21 821-045C...13 821-054C...21 821-054CGL...21 821-054CQT...21 821-054CTU...21 821-058C...21 821-058CGL...21 821-058CQT...21 821-058CTU...21 821-066C...21 821-066CGL...21 821-066CQT...21 821-066CTU...21 821-067C...21 821-067CGL...21 821-067CQT...21 821-067CTU...21 821-070C...21 821-070CGL...21 821-070CQT...21 821-070CTU...21 821-080C...21 821-080CGL...21 821-080CQT...21 821-080CTU...21 822-264C...13 822-283C...13 822-284C...13 822-285C...13 826-717C...13, 17 827-007C...13 838-287C...19 838-295C...19 838-415C...19 838-517C...19 848-159C...19 848-737C...19 848-808C...19 Dwg 33334...13 Dwg 33335...19 dwg33329...7 dwg33331...9 dwg33332...11 dwg33333...15 dwg33336...17 N/A...17 22 DT35 Ditcher 324-099P 07/10/18
This Page Intentionally Left Blank 07/10/18 DT35 Ditcher 324-099P 23
Great Plains Manufacturing, Inc. Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com