INDUSTRIAL SECTIONAL DOORS. Maahantuoja:

INDUSTRIAL SECTIONAL DOORS Maahantuoja: Annerman PRICE Oy LIST www.ovetikkunat.fi 2011

TRACK SYSTEM NP normal LHRF low with front mounted springs LHR low with back mounted springs B max = 8000 mm b min = 100 mm H max = 5510 mm = 6000 mm Hn min = 450 mm = 510 mm Hp = H W min = H+675 mm B max = 6000 mm b min = 160 mm H max = 4570 mm Hn min = 20 mm Hp = H - 100 mm W min = H+920 mm BxH max = 20 m 2 B max = 6000 mm b min = 160 mm H max = 4570 mm Hn min = 180 mm Hp = H - 100 mm W min = H+1285 mm BxH max = 20 m 2 FTR normal along roof construction FHL high along roof construction FLH low along roof construction α HL α α B max = 8000 mm b min = 100 mm H max = 5510 mm = 6000 mm Hn min = 450 mm = 510 mm Hp = H W min = H+40 mm α = 5 5 B max = 8000 mm b min = 100 mm H max = 4800 mm = 4800 mm = 5800 mm HL max = 120 mm = 000 mm = 2850 mm Hn min = HL+260 mm = HL+25 mm = HL+60 mm HL min = 210 mm Hp = H W min = H - HL+900 mm α = 5 60 B max = 5500 mm b min = 160 mm H max = 4570 mm Hn min = 180 mm Hp = H - 100 mm W min = H+1285 mm α = 5 5 BxH max = 18 m 2 HL high HL-K high on wall brackets HL HL B max = 8000 mm b min = 100 mm H max = 4800 mm = 4800 mm = 5800 mm HL max = 120 mm = 000 mm = 2850 mm Hn min = HL+260 mm = HL+25 mm = HL+60 mm HL min = 210 mm Hp = H W min = H - HL+750 mm B max = 5500 mm b min = 140 mm H max = 4800 mm = 5800 mm HL max = 000 mm = 2850 mm Hn min = HL+175 mm HL min = 800 mm Hp = H W min = H - HL+750 mm 12 Customized solutions

TRACK SYSTEM / MEASUREMENT AND INSTALLATION VL vertical VL-K vertical on wall brackets B max = 8000 mm b min = 100 mm H max = 00 mm = 5500 mm Hn min = H+0 mm = H+0 mm W min = 500 mm = 550 mm Hp = H B max = 5500 mm b min = 140 mm H max = 5500 mm Hn min = H+0 mm W min = 700 mm Hp = H way of measurement, view from inside of the room B opening width b sideroom width bn sideroom width on drive side H opening height Hn lintel height Hp clear passage height HL lift height W building-in depth α roof angle order dimension B x H name description extra charge unit remarks LHR LHRF HL VL low track system with springs at the back low track system with springs at the front high lift track system vertical lift track system 119 set door height up to 250 mm 179 set door height from 251 mm up to 4570 mm 119 set door height up to 250 mm 179 set door height from 251 mm up to 4570 mm 87 set lift up to 120 mm 177 set lift from 121 mm up to 2000 mm 267 set lift from 2001 mm up to 000 mm 8 % door height up to 250 mm 11 % door height from 251 mm up to 5500 mm -K construction for springs for HL and VL track systems 198 set FTR normal track system along roof construction 10 % extra charge on the initial K2 IS table price FLH low track system along roof construction with springs at the back 10 % extra charge on the initial K2 IS table price + extra charge for LHR track system FHL high lift track system along roof construction 10 % extra charge on the initial K2 IS table price + extra charge for HL track system Customized solutions 1

ADDITIONAL EQUIPMENT window L1 window L2 window L window R10 ventilation grille, PVC article name of accessory extra charge unit remarks K2 IS K2 IM K2 IA K2 IP S K2 IP D ZAM.KW.001 cylinder lock with handle 45 pc unification of glazing or embossment levels 0 pc each time upon inquiry safety edge protection preparation 5 rm bottom seal for optical or pneumatic safety edge device; not available for doors with pass door with 15mm threshold XMEL.DO.001 chain mechanism with gear ratio 4:1 81 pc standard length of chain 8 m NAP.DO.001 chain tensioner 6 pc recommended for automation and chain mechanism LIB.FF.001 tensioning rope 8 pc used for NP, FTR track systems (recommended for automation and chain mechanism) XLIB.FF.001 tensioning rope 47 pc used for LHR, LHRF, FLH track systems (recommended for automation and chain mechanism) one-sided varnishing of steel / aluminum section in the RAL palette colour two-sided varnishing of IP section in the RAL palette colour, one-coloured colours from RAL palette except: pearl, 17 m 2 metallic, fluorescent 49 m 2 pearl, metallic and fluorescent colours 24 m 2 metallic, fluorescent (upon inquiry), window colours from RAL palette except: pearl, slats will not be painted allows to remove graffiti from the door panel anti-graffiti coating m 2 with solvent RAG.UC.001 solvent to remove graffiti (1 liter) 47 pc used only for doors with anti-graffiti coating square window L1, screw-joined 65 pc dimensions 89 x 4 mm, black square window L2, screw-joined 47 pc dimensions 6 x 2 mm, black square window L, screw-joined 40 pc dimensions 609 x 20 mm, black oval window R10, spring-lock 65 pc dimensions 66 x 4 mm, black, no possibility of varnishing 1 % extra charge to the IP section price mat / milk glazing in IP section 12 % extra charge to the initial table price, concerns the windows in the whole door 10 % extra charge to the initial table price, concerns the windows in the whole door see the price table glazing with Anti-Scratch Coating (ASC) extra charge to the initial table price, concerns 40 % with improved scratch resistance the windows in the whole door % extra charge to the initial table price, concerns the windows in the whole door top cover from steel section 44 rm height 125-400 mm (min width 250 mm) top / lateral cover from steel section 114 m 2 above the height 400 mm (min width 250 mm) top cover from aluminum section 68 rm height 125-400 mm (min width 250 mm) top / lateral cover from aluminum section 17 m 2 above the height 400 mm (min width 250 mm) chain mechanism XMEL.DO.001 chain tensioner NAP.DO.001 perforated angle 40x40, L=000 mm KAF.FF.001 top / lateral cover from IP section 158 m 2 ventilation grille, PVC 8 pc dimensions 460 x 15 mm, white one-sided coat of varnish of window frame / ventilation grille with a colour from RAL palette pass door D2S 1) threshold height 90 mm max door width 5500 mm pass door D2S 1) threshold height 15 mm max door width 4000 mm pass door D2P 1) threshold height 90 mm max door width 4500 mm 11 pc 578 (714*) 747 (88*) colours from RAL palette except: pearl, metallic, fluorescent (upon inquiry) 1) minimum height of door with pass door and HL, HL-K, FHL, VL, VL-K track system - 2700 mm 2) it is recommended to use doors made of aluminum panels (K2 IA, K2 IP S, K2 IP D) for rooms with high humidity (e.g. car washes) detailed recommendations available on www.e-krispol.pl pc pc 699 pc opening width 840 mm, fitted with anodized aluminum profiles, with slat door closer, microswitch and lock with Eurocylinder * if the rd or/and 4th section (from the bottom) is an IP section opening width 840 mm, fitted with anodized aluminum profiles, with slat door closer, microswitch and lock with Eurocylinder * if the rd or/and 4th section (from the bottom) is an IP section opening width 840 mm, fitted with anodized aluminum profiles, with slat door closer, micro-switch and lock with Eurocylinder additional pass door lock 24 pc varnishing of frame and handle of the pass colours from RAL palette except: pearl, 84 pc door metallic, fluorescent (upon inquiry) colours from RAL palette except: pearl, varnishing of aluminum threshold of the 7 rm metallic, fluorescent (upon inquiry); concerns pass door the running metre of door width springs with durability of 50 000 cycles 5 % extra charge to the initial K2 IS table price galvanized springs % extra charge to the initial K2 IS table price improved humidity resistance 2) 20 % extra charge to the initial K2 IS table price (stainless steel hinges, cables, screws and rollers, galvanized springs) KAF.FF.001 perforated angle 40x40 L=000 mm 14 pc WYS.DO.001 exhaust port 1 pc hole diameter 77 mm PS four-sided steel profile 80x40, zink-plated 2 rm PS four-sided steel profile 80x40, varnished in a RAL colour 29 rm colours from RAL palette except: pearl, metallic, fluorescent (upon inquiry) PS four-sided steel profile 120x40, zink-plated 2 rm PS four-sided steel profile 120x40, varnished in a RAL colour 29 rm colours from RAL palette except: pearl, metallic, fluorescent (upon inquiry) exhaust port WYS.DO.001 14 Customized solutions

DEADMAN SETS KRISPOL DRIVES PRODUCT SPECIFICATION drive STAC 10.0 (100 Nm, 0 RPM) for doors up to 6 m 2 digital limit switches (setting of end-positions from the floor level with up-stop-down control panel) motor duty cycle ED 60% control central CS100 (integrated in the drive) with 1 m power cable and 5-pin CEE plug (16 A) up/stop/down control panel CSI with illuminated buttons, with 5 m or 9 m cable and system plug drive and control central in IP 65 housing deadman-mode operation in closing direction (not expandable), impulse-mode available only in opening direction cycle counter emergency operation with hand chain (KE) - length of chain 5 rm supply voltage x 400 V set includes mounting bracket article name price unit XZES.MF.00 Door control set Deadman: drive STAC 10.0 KE + control central CS100 + control panel up/stop/down CSI with 5 m cable 547 set XZES.MF.004 Door control set Deadman: drive STAC 10.0 KE + control central CS100 + control panel up/stop/down CSI with 9 m cable 552 set IMPULSE SETS KRISPOL DRIVES PRODUCT SPECIFICATION drive STA 10.24 (100 Nm, 24 RPM) for doors up to 6 m 2 digital limit switches (setting of end-positions from the floor level with buttons in the control central) motor duty cycle ED 60% control central CS00 with illuminated buttons and 1 m power cable with 5-pin CEE plug (16 A), 2-line LCD display with menu in 8 languages drive and control central in IP 65 housing steering cable 5 m or 9 m with system plugs impulse-mode operation in closing and opening direction cycle counter emergency operation with hand chain (KE) - length of chain 5 rm connection box with spiral cable for safety edge device (possibility of connecting also a pass door micro-switch) and Z-angle optical safety edge device or pre-running photocells DUO with two lines of opto-sensors (for doors with pass door with low threshold) 4 programmable relay outputs for signaling lamps or external devices overload monitoring in opening direction automatic closing after programmed time or after passing photocells line summer/winter function (half-opening) possibility of connecting traffic lights (without two-way traffic management function), internal lamps possibility of connecting radio receiver, additional control devices (control panel up/stop/down, key switch etc.) supply voltage x 400 V set includes mounting bracket article name price unit XZES.MF.007 Door control set Impulse: drive STA 10.24 KE with 5 m cable + control central CS00 + optical safety edge device 689 set XZES.MF.008 Door control set Impulse: drive STA 10.24 KE with 9 m cable + control central CS00 + optical safety edge device 700 set XZES.MF.011 Door control set Impulse: drive STA 10.24 KE with 5 m cable + control central CS00 + pre-running photocells DUO 901 set XZES.MF.012 Door control set Impulse: drive STA 10.24 KE with 9 m cable + control central CS00 + pre-running photocells DUO 912 set Customized solutions 15

GFA DRIVES DEADMAN basic SET PRODUCT SPECIFICATION drive TSE 5.24 WS (50 Nm, 24 RPM) for doors up to 12 m 2 mechanical limit switches (setting of end-positions in the drive) motor duty cycle ED 40% control central T801 (integrated in the drive) up/stop/down control panel with 5 m cable and system plug 1 m power cable with -pin CEE plug (16 A) drive and control central in IP 54 housing deadman-mode operation in closing direction (not expandable), impulse-mode available only in opening direction emergency operation with hand chain (S2K) - length of chain 4 rm supply voltage 1 x 20 V set includes mounting bracket ATTENTION: the set is only available with 5 m steering cable, so it is impossible to apply it for: - doors with shaft mounted over 6500 mm high - doors with height over 2750 mm and LHR and FLH track system (assuming that standard cables are used and the control panel up/stop/down is mounted at a height of 1500 mm) article name price unit XMON.GF.066 Door control set Deadman basic: drive TSE 5.24 S2K + control central T801 + control panel up/stop/down with 5 m cable 517 set GFA DRIVES DEADMAN SETS PRODUCT SPECIFICATION drive SE 5.24 (50 Nm, 24 RPM) for doors up to 15 m2 / SE 9.0 (90 Nm, 0 RPM) for doors up to 0 m 2 mechanical limit switches (setting of end-positions in the drive) motor duty cycle ED 60% control central WS900 (mounted on the drive) up/stop/down control panel with 5 m or 9 m cable drive and control central in IP 54 housing deadman-mode operation in closing direction (not expandable), impulse-mode available only in opening direction emergency operation with hand chain (S2K) - length of chain 4 rm supply voltage x 400 V set includes mounting bracket article name price unit XMON.GF.068 Door control set Deadman: drive SE 5.24 S2K + control central WS900 + control panel up/stop/down with 5 m cable 56 set XMON.GF.069 Door control set Deadman: drive SE 5.24 S2K + control central WS900 + control panel up/stop/down with 9 m cable 568 set XMON.GF.070 Door control set Deadman: drive SE 9.0 S2K + control central WS900 + control panel up/stop/down with 5 m cable 595 set XMON.GF.071 Door control set Deadman: drive SE 9.0 S2K + control central WS900 + control panel up/stop/down with 9 m cable 600 set 16 Customized solutions

IMPULSE SETS GFA DRIVES PRODUCT SPECIFICATION drive SE 5.24 (50 Nm, 24 RPM) for doors up to 15 m 2 / SE 9.0 (90 Nm, 0 RPM) for doors up to 0 m 2 digital limit switches (setting of end-positions from the floor level with buttons in the control central) motor duty cycle ED 60% control central TS970 with 1 m power cable and 5-pin CEE plug (16 A) drive and control central in IP 54 housing steering cable 5 m or 9 m with system plugs impulse-mode operation in closing and opening direction cycle counter emergency operation with hand chain (S2K) - length of chain 4 rm connection box with spiral cable for safety edge device (possibility of connecting also a pass door micro-switch) optical safety edge device 1 relay output for signaling lamp or an external device overload monitoring in opening direction automatic closing after programmed time or after passing photocells line summer/winter function (half-closing) possibility of connecting traffic lights (without two-way traffic management function), internal lamps possibility of connecting radio receiver, additional control devices (control panel up/stop/down, key switch etc.) supply voltage x 400 V set includes mounting bracket article name price unit XMON.GF.072 Door control set Impulse: drive SE 5.24 S2K + control central TS970 with 5 m cable + optical safety edge device 74 set XMON.GF.07 Door control set Impulse: drive SE 5.24 S2K + control central TS970 with 9 m cable + optical safety edge device 75 set XMON.GF.074 Door control set Impulse: drive SE 9.0 S2K + control central TS970 with 5 m cable + optical safety edge device 775 set XMON.GF.075 Door control set Impulse: drive SE 9.0 S2K + control central TS970 with 9 m cable + optical safety edge device 786 set Customized solutions 17

GFA DRIVES IMPULSE traffic SETS PRODUCT SPECIFICATION drive SE 5.24 (50 Nm, 24 RPM) for doors up to 15 m 2 / SE 9.0 (90 Nm, 0 RPM) for doors up to 0 m 2 digital limit switches (setting of end-positions from the floor level with buttons in the control central) motor duty cycle ED 60% control central TS981 with 1 m power cable and 5-pin CEE plug (16 A) one-way and two-way traffic steering, possible setting the priority to entry or exit drive and control central in IP 54 housing steering cable 5 m or 9 m with system plugs impulse-mode operation in closing and opening direction cycle counter emergency operation with hand chain (S2K) - length of chain 4 rm connection box with spiral cable for safety edge device (possibility of connecting also a pass door micro-switch) optical safety edge device 2 relay outputs for traffic lights 2 programmable relay outputs for external devices overload monitoring in opening direction automatic closing after programmed time or after passing photocells line summer/winter function (half-closing) possibility of connecting radio receiver, additional control devices (control panel up/stop/down, key switch etc.) supply voltage x 400 V set includes mounting bracket article name price unit XMON.GF.076 Door control set Impulse traffic: drive SE 5.24 + control central TS981 with 5 m cable + optical edge safety device 991 set XMON.GF.077 Door control set Impulse traffic: drive SE 5.24 + control central TS981 with 9 m cable + optical edge safety device 1 002 set XMON.GF.078 Door control set Impulse traffic: drive SE 9.0 + control central TS981 with 5 m cable + optical edge safety device 1 019 set XMON.GF.079 Door control set Impulse traffic: drive SE 9.0 + control central TS981 with 9 m cable + optical edge safety device 1 00 set 18 Customized solutions

IMPULSE speed SETS GFA DRIVES PRODUCT SPECIFICATION high-speed drive SE 6.65 DU (60 Nm, 20-65 RPM) for doors up to 2 m 2 soft start and stop digital limit switches (setting of end-positions from the floor level with buttons in the control central) motor duty cycle ED 60% control central TS970 with 1 m power cable and 5-pin CEE plug (16 A) drive and control central in IP 54 housing steering cable 5 m or 9 m with system plugs impulse-mode operation in closing and opening direction cycle counter emergency operation with hand chain (S2K) - length of chain 4 rm / quick release mechanism (ER) connection box with spiral cable for safety edge device (possibility of connecting also a pass door micro-switch) optical safety edge device 1 relay output for signaling lamp or an external device overload monitoring in opening direction automatic closing after programmed time or after passing photocells line summer/winter function (half-closing) possibility of connecting traffic lights (without two-way traffic management function), internal lamps possibility of connecting radio receiver, additional control devices (control panel up/stop/down, key switch etc.) supply voltage x 400 V set includes mounting bracket article name price unit XMON.GF.080 Door control set Impulse speed: drive SE 6.65 DU S2K + control central TS970 with 5 m cable + optical safety edge device 1 166 set XMON.GF.081 Door control set Impulse speed: drive SE 6.65 DU S2K + control central TS970 with 9 m cable + optical safety edge device 1 177 set XMON.GF.082 Door control set Impulse speed: drive SE 6.65 DU ER + control central TS970 with 5 m cable + optical safety edge device 1 198 set XMON.GF.08 Door control set Impulse speed: drive SE 6.65 DU ER + control central TS970 with 9 m cable + optical safety edge device 1 209 set Customized solutions 19

AUTOMATIC EQUIPMENT SPECIFICATION KRISPOL GFA DEADMAN [2] IMPULSE [4] DEADMAN basic [1] DEADMAN [] IMPULSE [4] IMPULSE traffic [4] IMPULSE speed [4] operating mode closing deadman 1) impulse deadman 1) deadman 1) impulse impulse impulse opening impulse impulse impulse impulse impulse impulse impulse model STAC STA TSE SE SE SE SE DU max door size [m 2 ] 6 6 12 15 / 0 15 / 0 15 / 0 2 output torque [Nm] 100 100 50 50 / 90 50 / 90 50 / 90 60 output revolutions [RPM] 0 24 24 24 / 0 24 / 0 24 / 0 20-65 motor performance [kw] 0,55 0,7 0,7 0,0 / 0,7 0,0 / 0,7 0,0 / 0,7 0,45 limit switches digital digital mechanical mechanical digital digital digital setting of end-positions from the floor level from the floor level in the drive in the drive from the floor level from the floor level from the floor level motor duty cycle [ED] S-60% S-60% S-40% S-60% S-60% S-60% S-60% drive class of protection [IP] 65 65 54 54 / 65 54 / 65 54 / 65 54 / 65 operating voltage [V] x 400 x 400 1 x 20 x 400 x 400 x 400 x 400 mains frequency [Hz] 50 50 50 50 50 50 50 nominal motor current [A],0 2,1,5 1,1 / 1,2 1,1 / 1,2 1,1 / 1,2 0,9 fuse protection [A] 10 10 10 10 10 10 10 permanent sound emission [db(a)] <70 <70 <70 <70 <70 <70 <70 working temperature range [ C] -20 / +60-20 / +60-5 / +40-5 / +40-5 / +40-5 / +40-5 / +40 chain length [rm] 5 5 4 4 4 4 4 cable 2) [m] 5 / 9 5 / 9 5 5 / 9 5 / 9 5 / 9 5 / 9 model CS100 CS00 T801 WS900 TS970 TS981 TS970 class of protection [IP] 65 65 54 54 54 / 65 ) 54 / 65 ) 54 / 65 ) power cable, plug 1m 5-pin CEE 16A 1m 5-pin CEE 16A 1m -pin CEE 16A - 1m 5-pin CEE 16A 1m 5-pin CEE 16A 1m 5-pin CEE 16A working temperature range [ C] -10 / +45-10 / +45-5 / +40-5 / +40-5 / +40-5 / +40-5 / +40 illuminated buttons - - - - - automatic closing [s] - 1-60 - - 1-240 1-240 1-240 cycle counter - - traffic steering - - - - - - control central relay output [pc] - 4 (20V, 4A) - - 1 (20V, 1A) 2 + 2 (20V, 1A) 1 (20V, 1A) 24V output - - radio receiver input - - - impulse (step-by-step) input - - 4) up-stop-down input - 4) photocells input - - 5) 4) microswitch input automatic floor-level adjustment - - - summer/winter function - half-opening - - half-closing half-closing half-closing protections overload monitoring - - - safety edge device - optical / pre-running - - optical optical optical 1) not expandable to impulse-mode 2) length of cable between drive and control central / up-stop-down control panel ) class of protection IP 65 only with direct connection (without CEE plug) 4) separate inputs for commands from the outside and inside 5) only as an additional safety protection, does not allow impulse-mode closing NOTE: The chain opening device is not designed for everyday use, but only for emergency manual operation, e.g. in the case of power failure. Drives with class of protection IP 54 are not designed to work in areas with high humidity (e.g. car wash). Drives with class of protection IP 65 can only be mounted vertically. The ability to use emergency opening device only from the inside, it is necessary to apply a service door or additional entrance to the room. 20 Customized solutions

INSTALLATION DIAGRAMS AUTOMATIC EQUIPMENT [1] GFA DEADMAN basic [2] KRISPOL DEADMAN 1 2 1 2 x400v 4b 1x20V 4a [] GFA DEADMAN [4] KRISPOL IMPULSE, GFA IMPULSE... 1 2 x400v 4c 1 8 2 x400v 4b 7b 7a 7b 6 5 6 7a 1 drive 2 control central control panel up-stop-down 4a power supply - 1m cable with CEE plug (-pin, 16 A) 4b power supply - 1m cable with CEE plug (5-pin, 16 A) 4c power supply - direct connection (without CEE plug) 5 spiral cable, connection box 6 optical safety edge device / pre-running photocells 7 (optional photocell 7b (optional photocell (not available in case of photocell with reflex) 7c (optional) traffic light Customized solutions 21

AUTOMATIC EQUIPMENT ADDITIONAL ACCESSORIES article name price unit remarks DEADMAN IMPULSE XMIR.EK.001 micro-switch for bolt / lock 14 pc without cable MIZ.FF.004 micro-switch for cable break device (universal) 11 pc MIZ.FF.002/00 micro-switch for cable break device (left/right) 1 pc used for NP, HL, HL-K, VL, VL-K, FTR, FHL track systems; maximum door weight 400 kg; without cable used for NP, HL, HL-K, VL, VL-K, FTR, FHL track systems; door weight 400-750 kg and LHR, LHRF, FLH track systems; without cable MIZ.DO.001 micro-switch for spring break device 15 pc LAM.MF.001 additional hand chain for STA / STAC drive (Krispol) 2 rm used for doors with spring shaft mounted over,5 m high LAM.GF.001 additional hand chain for SE / TSE drive (GFA) 2 rm used for doors with spring shaft mounted over m high KON.GF.001 control panel up/stop/down 22 pc without cable, IP 65 KON.GF.004 control panel up/stop/down, lockable 61 pc without cable, IP 65 XPRE.GF.001 lintel switch (pull-switch) with 2,5 m chain 88 pc without cable, IP 65 XPRE.PL.006 one-position key switch, under-plaster 0 pc without cable, IP 54 XPRE.PL.005 one-position key switch, on-plaster 0 pc without cable, IP 54 XPRE.PL.00 two-position key switch, under-plaster 0 pc without cable, IP 54 XPRE.PL.001 two-position key switch, on-plaster 0 pc without cable, IP 54 KAL.EK.002 4-wire cable with ends, 5 m 6 pc used for control panel or key/lintel switch KAL.EK.00 4-wire cable with ends, 9 m 10 pc used for control panel or key/lintel switch FOT.MF.001 photocell with reflex 67 set without cable, IP 67 FOT.MF.002 photocells, one-way 104 set transmitter with 12 m cable, receiver with m cable, IP 65 ODR.MF.001 1-channel receiver for control central CS00 6 pc for max 15 transmitters ODR.MF.002 2-channel receiver, universal 72 pc for max 15 transmitters NAD.MF.001 2-channel transmitter RT 21 29 pc NAD.MF.002 4-channel transmitter RT 20 pc LAS.MF.001 traffic light red 7 pc including bulb, IP 65 LAS.MF.002 traffic light green 7 pc including bulb, IP 65 LAS.MF.00 traffic light red + green 74 pc including bulbs, IP 65 DET.MF.001 inductive loop detector, 1-channel 142 pc IP 54 DET.MF.002 inductive loop detector, 1-channel, in housing 197 pc IP 54 DET.MF.00 inductive loop detector, 2-channel 188 pc direction detection, IP 54 DET.MF.004 inductive loop detector, 2-channel, in housing 255 pc direction detection, IP 65 KAL.MF.004 inductive loop cable 1 rm RAD.MF.001 radar motion detector 27 pc distinguishes between persons and vehicles, direction detection, suppression of crossing traffic, setting of field size, IP 65 NAD.MF.00 remote control for radar motion detector 100 pc setting of all radar parameters from the bottom, IP 65 SEN.MF.001 headlamp flasher sensor with transmitter 57 pc opens door with car headlamp flash, possibility of setting the number of light pulses, wireless system works only in combination with ODR.MF.001/002 radio receiver, IP 65 additional hand chain LAM.MF.001/ LAM.GF.001 control panel up/stop/down KON.GF.001 one-position key switch XPRE.PL.006 / XPRE.PL.005 two-position key switch XPRE.PL.00 / XPRE.PL.001 22 Customized solutions

ADDITIONAL ACCESSORIES AUTOMATIC EQUIPMENT 1-channel receiver for control central CS00 ODR.MF.001 2-channel receiver, universal ODR.MF.002 2-channel transmitter RT 21 NAD.MF.001 4-channel transmitter RT 20 NAD.MF.002 photocell with reflex FOT.MF.001 photocells, one-way FOT.MF.002 radar motion detector RAD.MF.001 remote control for radar motion detector NAD.MF.00 headlamp flasher sensor with transmitter SEN.MF.001 traffic light red / green LAS.MF.001 / LAS.MF.002 traffic light red + green LAS.MF.00 inductive loop detector 1- channel / 2- channel DET.MF.001 / DET.MF.00 inductive loop detector 1-channel / 2- channel in housing DET.MF.002 / DET.MF.004 inductive loop cabel KAL.MF.004 Customized solutions 2

SIDE DOORS SIDE DOORS 50 without thermal insulation PROFILES single-leaf door without horizontal bar, opened outwards or inwards Ponzio NT 50 profile system (without thermal insulation) colour: depending on the type double-sided sealing mounted onto the catch slats low aluminum doorstep (12 mm) maximum dimensions: width 1200 mm, height 2400 mm FILLING colour: depending on the type FITTINGS cylinder lock adjustable clamp hinges hinges, lever handle, escutcheon in black DB IS DB IM DB IA DB IP S DB IP D basic colours white 9002 silver 9006 white 9002 anodized aluminum anodized aluminum height/width 755-884 885-1200 755-884 885-1200 755-884 885-1200 755-884 885-1200 755-884 885-1200 1780-2400 461 491 484 516 580 610 550 569 649 67 SIDE DOORS 60 with thermal insulation PROFILES single-leaf door without horizontal bar, opened outwards or inwards Aluprof MB 60E profile system (with thermal insulation) colour: depending on the type double-sided sealing mounted onto the catch slats aluminum doorstep with thermal insulation (20 mm at the highest point) FILLING colour: depending on the type FITTINGS cylinder lock adjustable surface hinges hinges, lever handle, escutcheon in black maximum dimensions: width 1100 mm, height 200 mm DB IS DB IM DB IA DB IP S DB IP D basic colours white 9002 silver 9006 white 9002 anodized aluminum anodized aluminum RAL colours RAL 1) RAL 1) RAL 1) RAL 2) RAL 2) height/width 755-884 885-1100 755-884 885-1100 755-884 885-1100 755-884 885-1100 755-884 885-1100 496 529 519 554 615 648 585 607 684 711 1780-200 5 566 556 591 652 685 622 644 721 748 1) all RAL colours except for pearl, metalic, fluorescent (upon inquiry); two-side painting of door leaf frame and door frame and outside painting of door leaf infill 2) all RAL colours except for pearl, metalic, fluorescent (upon inquiry); two-side painting of door leaf frame, door frame and door leaf infill; window slats will be not painted basic colours RAL colours 24 Customized solutions

SIDE DOORS ADDITIONAL EQUIPMENT article name of accessory extra charge unit side door closer 87 pc additional door lock 24 pc security door lock 107 pc drum lock - point latching 122 pc upon inquiry antipanic lock 94 pc lever in red remarks handle-knob 25 pc prevents the door from being opened without a key from the outside, also used for electromagnetic bolt electromagnetic bolt 56 pc cylinder lock, security class A 22 pc cylinder lock, security class B 41 pc cylinder lock, security class C 85 pc SIDE DOORS 50 - MEASUREMENT AND INSTALLATION SIDE DOORS 60 - MEASUREMENT AND INSTALLATION A installation in the opening opening to the outside/to the inside B D = B - 15 mm H D = H - 15 mm 42 Passage inside diameter dimensions: width BD - 18 mm height HD - 55 mm opening to the outside: 1 A installation in the opening HD A installation in the opening opening to the outside/to the inside BD = B - 15 mm H D = H - 15 mm 62,5 Passage inside diameter dimensions: width BD - 185 mm height HD - 82 mm opening 1 to the outside: dimensioning method view from outside the room B opening width BD door frame width H opening height HD door frame height opening to the inside 2 door frame dimension = order dimension B D x H D opening to the inside 2 B installation behind the opening opening to the inside B D = B + min 10 mm 4 max 80 mm H D = H + min 10 mm 4 max 40 mm 52 42 B installation behind the opening Passage inside diameter dimensions: width BD - 18 mm height HD - 55 mm opening 2 to the inside HD dimensioning method view from outside the room B opening width BD door frame width H opening height HD door frame height 60 62,5 B installation behind the opening opening to the inside B D = B + min 10 mm 4 max 120 mm H D = H + min 10 mm 4 max 58 mm Passage inside diameter dimensions: width B D - 185 mm height H D - 82 mm opening 2 to the inside inside 42 inside door frame dimension = order dimension B D x H D inside 62,5 inside outside outside outside outside right doors, outwards left doors, outwards left doors, inwards right doors, inwards Customized solutions 25

Customized solutions KRISPOL has been active in the construction industry since 1991. It is ranked among the leading manufacturers of garage doors, industrial doors, rolling grilles, roller shutters, windows and doors, cooperating with the best suppliers. KRISPOL s offer includes: GARAGE DOORS INDUSTRIAL DOORS ROLLING GRILLES ROLLER SHUTTERS ALUMINUM JOINERY KRISPOL garage doors are not only safe and functional, but also comfortable and elegant. Diversity of patterns and colours ensures that each Customer can find something to meet their expectations. KRISPOL offers sectional and rolling garage doors. Industrial doors offered by KRISPOL will perfectly protect your business premises. They not only protect from burglary, but also eliminate the risk of accidents. KRISPOL offers sectional and rolling industrial doors. KRISPOL offers two types of rolling grilles: steel and aluminum grilles, produced according to specified dimensions. Equipping your shop with a rolling grille enables your products to be displayed in a permanent and attractive fashion while preserving security at the same time. KRISPOL roller shutters are made of high quality aluminum profiles and are filled with freon-free polyurethane foam; as a result they keep the heat effectively in wintertime and at night-time, while protecting against light and overheating in the summer. Roller shutters also provide protection against noise and act as an additional hindrance to burglars. Entrance doors and specialized doors made by KRISPOL guarantee durability, easy maintenance, resistance to weather conditions and high level of thermal insulation. KRISPOL also offers doors with sidelights/ toplights, doubleleaf doors, windows, fixed windows and shop fronts. Maahantuoja: Annerman Oy Takkatie 14, 0070 Helsinki www.ovetikkunat.fi