INTERNATIONAL PRODUCT RANGE

EVOLVING AGRICULTURE. INTERNATIONAL PRODUCT RANGE www.trio-b.com SDFL301-229 Technical data and illustrations are approximations only. DEUTZ-FAHR, in its efforts to supply the product that you require, reserves the right to update this information at any time without notice. 308.8354.3.4-10 / 12 The use of SDF original lubricants and coolants is recommended. DEUTZ-FAHR LUBRICANTS DEUTZ-FAHR is a

content history... 4-5 technology... 6-7 tractors...8-19 combine harvesters... 20-25 forage harvesting... 26-29 aftersales & service... 30-33 SDF Group... 34-35 technical data... 36-39 2 3

DEUTZ-FAHR Deutz-Fahr. At your side for more than 85 years. When a brand has been acclaimed by farmers and contractors for over 80 years, then it must be something special. Even at the very start of mass production of diesel tractors in 1927, DEUTZ-FAHR was one of the first manufacturers in the world to recognize that mechanization of agriculture was the only way to increase farmers productivity and could therefore make a major contribution to raising the general standard of living in society. All technical developments have always been geared towards the requirements of farmers. With simple and rugged machines DEUTZ-FAHR delivered precisely the technology to make the work in the field both easier and more comfortable. It was the invention of the farmer s tractor, for instance the Deutz 11 series that helped the mechanization of agriculture really finally really take off in 1936. And this has been followed ever since by a constant flow of new trendsetting concepts such as the introduction of air-cooled engines (1950), the first controlled hydraulics (1958), the Intrac concept (1972), the free vision concept (1990), the spacious panoramic cab (1995) and front axle suspension (1996). In this connection the principle has always been that if it helps the farmer, then it is good. The fact that well over 320,000 tractors are currently still in use provides impressive testimony of DEUTZ-FAHR s reliability and closeness to its customers. 2001 1935 1959 MILESTONES IN TRACTOR PRODUCTION 1927 Serial production of DEUTZ tractors starts. 1933 F2M 315. First DEUTZ tractor with 5-gear transmission, PTO drive and block design (28 hp). 1936 F1M 414. The breakthrough for the motorization of small-scale agricultural operations came with the Deutz 11 series, the typical farmer s tractor F1M 414. late 50s D series. The launch of the D25 saw the new FL712 generation of engines, with power ranging from 13 to 52 hp, also Introduced to the range of Deutz-Fahr tractors. 1965 D-05. Four-wheel drive was offered for the first time for the D 6005 to D 9005 in the four- to six-cylinder class. 1968 D-06. First deliveries of the D-06 series. 1972 InTrac. The unusual tractor concept with three mounting areas, front cab, sliding doors, front powerlift and front PTO attracted tremendous interest. 1978 DX. With the DX series, DEUTZ-FAHR brought out a generation of tractors with a completely new design concept, featuring new engines, a fully-synchronized transmission with closed-circuit pressure lubrication and four-wheel drive as standard. Five-cylinder diesel engines were also used for the first time. 1990 AgroXtra. With the AgroXtra, DEUTZ-FAHR was the first manufacturer to offer the first genuine open-view tractor. 2000 Agrotron MK3. With its still revolutionary spacious cab concept DEUTZ-FAHR offers a series of tractors which set the standard in terms of hydraulic power, cab design and user-friendliness with power ranging from 80 to 260 hp. 2001 Agrotron TTV. The new AGROTRON TTV, launched in 2001, represented a new generation of tractors from DEUTZ-FAHR with infinitely variable gearbox and a completely new control concept. 2009 AgroXXL. At Agritechnica 2009 Deutz-Fahr presented the AgroXXL - the first 8wheel drive tractor in the world with 600hp. 2010 Agrofarm TTV. With its new compact continuously variable transmisson the Agrofarm TTV offers comfortable productivity in the 100 hp class. 2012 Series 7 Agrotron TTV: performance and comfort redefined. 1995 1990 1972 5

DEUTZ-FAHR Intelligent technology. PTO One transmission, two optional top speeds: 40 or 50 kph. With 4 PTO speeds as standard: 540 / 540 E / 1,000 / 1,000 E Stop & Go enables the driver to maneuver easily and comfortably because it eliminates exhausting coupling work. AGRex External exhaust gas recirculation considerably reduces emissions. DEUTZ Common-Rail. The technology for minimal fuel consumption and the quickest possible response characteristics. Approval for 100 % bio-diesel: Saves costs and protects the environment. The new DEUTZ Tier 4i engines have been equipped with the 2,000 bar Common Rail system: power output and fuel consumption have been considerably improved. Optimum fuel combustion thanks to four valves and 7-hole injection nozzles. SAVE DIESEL Working range 4 Consumption g/kwh D R I V E D E U T Z Thanks to their innovative engine technology and their PTOs, DEUTZ-FAHR tractors save up to 15 % on diesel fuel. Tapered chassis, new streamlined hood contour and new axles of DEUTZ-FAHR orchards tractors ensure a steering angle with reduced turning circle of just 3.4 metres. Power Efficiency is the philosophy that today DEUTZ-FAHR uses to design, improve and develop all its products. Working range 3 Working range 2 Working range 1 1,000-20 % 1,000 E MONTHS WARRANTY Multi-plate clutches 1,400 1,600 1,800 2,000 Speed n [rpm] Exclusively at DEUTZ-FAHR: 24 months guarantee for all Agrotron from 132 hp. TTV 10 YEARS ANNIVERSARY Ten years of continuously comfortable and productive work. Thanks to SCR (Selective Catalytic Reduction) technology, the new Deutz TIER 4i engines offer a unique combination of superior performance, notable fuel economy and low emissions. Up to 100 % mechanical power transmission: The high level of efficiency of the TTV transmission cannot fail to impress. Thanks to the economy PTO the Agrotron operates at speed of 1,600 rpm which is the optimum for consumption. The speed is reduced by 20 % and fuel consumption by 12 %. Surveys regularly show that what farmers and contractors want are reliable and economical machines. High-tech normally comes lower down the list of priorities. Which is why DEUTZ-FAHR concentrates on the essentials such as economical engines, perfectly coordinated transmissions, powerful hydraulics and comfortable cabs. Leading engine technology DEUTZ-FAHR s engine strategy is clear and unambiguous they have to be economical and reliable. DEUTZ-FAHR is one of the few manu facturers to still manufacture its own engines and, thanks to its holding in leading engine manufacturer DEUTZ AG, it also has access to modern and economical engine technology. Milestones such as electronic engine control, high-pressure injection and the Common-Rail system were largely DEUTZ developments. In summary, maximum power and torque for minimum fuel consumption. The right transmission technology for every application The customer has the choice. DEUTZ-FAHR has the right transmission for every tractor and application, be it synchro transmission, Eco-Speed transmission, Powershift transmission with 3 and 4 Powershift stages, Powershift transmission with APS (Automatic Powershift) or infinitely variable TTV transmission. DEUTZ-FAHR is one of just a few manufacturers to offer transmissions with electronically programmable top speeds (depending on the model). And fuel consumption was also taken into account here as well, with the top speed for most models being achieved with a reduced engine speed. Savings four times over From as low as the 90 hp models, DEUTZ-FAHR tractors come with four PTO speeds. This is because on top of the 540 / 1,000, the Agrotron models are equipped with the 540 E and 1,000 E economy PTOs as standard. Their low engine speeds reduce fuel consumption, engine load and noise disturbance for both driver and environment. Thanks to a well-coordinated transmission the working range of the PTO is within the most favourable consumption range and as a result of the engine characteristics offers extremely high power and torque levels at the same time. This means a lot of power even for the economy PTO as well. Maximum hydraulic capacity It is reassuring to know that all DEUTZ-FAHR tractors come with high-performance hydraulic systems. Because farmers always want to be able to use implements which match the performance of their tractor. The lifting forces, too, are up with the best and therefore ensure that the optimum working width is always utilized. 6 7

Tractors Special tractors, narrow-track and compact tractors in addition to large tractors. The DEUTZ-FAHR tractor program comprises models ranging from 40 to 275 hp, which can be productively used reliably, conveniently and above all economically in all agricultural businesses. 8 9

AGROTRON X 710 720 AGRex MONTHS WARRANTY Great class With over 50,000 units and a multitude of versions and equipment options, the Agrotron series is one of the most produced tractors in Europe. Its performance and reliability has been service-proven in well over 80 million operating hours in agricultural enterprises all over the world. As the leader in terms of cab concept and ease of operation, the Agrotron X sets new standards for operating convenience in the large tractor class. The extensive range of standard equipment features practical details and technical equipment that some competitors do not offer for love nor money. Operation is so easy and efficient that every driver quickly gets used to it intuitively and without lengthy instruction and can therefore immediately get down to productive work. Advantages which are particularly valued by contractors, for whom every minute is often critical. The driver can program the functions of the Agroton X to personal requirements and use automatic functions to make his work easier and more economical, leaving him free to concentrate on his work and not the operation of the tractor. The imonitor is optional available for the Agrotron X. 6-speed main transmission and the four-powershift stages can be conveniently operated on the gearshift lever. DEUTZ Common-Rail 24 valve engines, Tier III, 6 cylinder, 7146 cm 3 with turbo, intercooler, electronic engine management and external exhaust-gas recirculation system 100 % compatible with biodiesel fuel (B100) 6-speed transmission with automatic Powershift (4 Powershift gears with electrohydraulic pushbutton control): 40 FWD + 40 REV, max. speed 50 km / h, at economy engine speed, limited to 40 km / h with super-economy engine speed (to meet legal requirements) Hydraulic system with variable displacement pump with Load Sensing Electronically controlled radar-equipped rear lift Maximum comfort guaranteed by automatically controlled hydraulic suspension on front axle and cab Integrated multifunction monitor for control of main functions 10 Easy to read at night as well: The Info-Center in the Agrotron X. The Powershift stages can also be shifted at a touch with the PowerComS operating lever. 11

AGROTRON 165.7 AGROtrac 100 110 115 130 150 170 Flexible, versatile, manoeuvrable and compact The clear-view design, the lines and the spacious panoramic cab of the Agrotron are unmistakable. As a result, the Agrotron sets standards in tractor design and guarantees its owner productivity, lasting value and economic success. The latest DEUTZ engine technology with 7.2 l cylinder capacity for high constant torque and power range EMC electronic engine control 4-stage Powershift transmission with 24 / 24 or 40 / 40 speeds Powershuttle for clutch-free forwards/reverse shifting as standard feature 4-stage PTOs 540 / 540 E and 1,000 / 1,000 E rpm Load Sensing hydraulics with high pump rating available Spacious cab with air conditioning and excellent view of all cultivation areas Even more comfort provided by front axle and cab suspension The optional multi-function armrest accommodates the controls of the EHR, the Powershift, the manual throttle and the EMC. Electronic engine control ensures optimal injection efficiency, stable performance during all operating conditions. Agrotrac the perfect tractor for transports and field work The DEUTZ-FAHR Agrotrac range is designed and built to tackle a wide spread of farm work. Because they are so productive and versatile, Agrotrac tractors are perfectly at ease with demanding open field work, even carrying implement combinations. They also excel in fast transport. A good power-to-weight ratio, correct weight distribution, and advanced technical specifications guarantee maximum efficiency under all conditions, while intelligent ergonomics and an intuitive control layout make them easy to operate from the moment you climb aboard. SDF series 1,000 tier II engines, 6 cylinders, aspired, turbo or turbo intercooler 24 FWD + 12 REV synchronised gearbox Cab with a high visibility roof High efficiency transmission 240 litres fuel tank capacity 7,900 kg max. lifting capacity with 68 l / min pump delivery 12 Compact cooler system: All coolers are opened for maintenance and cleaning with one motion. The cab roof incorporates a large glass hatch so that front loading can be performed with full visibility. 13

AGROFARM 410 420 430 Agrolux 80 85 90 95 100 PTO Economical compact class Exceptional working economy from powerful, mid-range tractors. The new Agrofarm is a universal tractor specified with functional, modern equipment. With economical DEUTZ engines and compact dimensions giving great flexibility and manoeuvrability. Clear control layout and manageability in addition to maximum productivity are further important features. The ideal tractor for pasture, cultivation and yard applications. Deutz Tier III 2012 series engines, 4 cylinder turbo or turbo intercooler, 4,038 cm³ 100 % compatible with biodiesel fuel (B100) Modern one-piece hood design; new 4-post ergonomic cab with outstanding all round visibility 5 synchronised speed gears, 4 ranges (40 FWD + 40 REV), with creep and Hi-Lo Maximum speed 40 km / h also with Overspeed Hydraulic Powershuttle with control lever on steering column and modulation response control Fully independent PTO with four speeds (540 / 540 E / 1,000 / 1,000 E) Ground speed PTO available True 4-wheel braking on all four wheels with optional park brake 14 Hydraulic Powershuttle available on request. The central dashboard provides all the essential information. Productive and versatile: The Agrolux 80-100 Designed and built to meet a wide range of agricultural requirements, DEUTZ-FAHR Agrolux models are productive and versatile, perfectly capable of taking on the toughest of tillage and general yard duties without difficulty. An advantageous power-to-weight ratio, correct weight distribution and high technical specifications guarantee maximum efficiency under all conditions, while intelligent ergonomics and an intuitive control layout make these machines easy to operate right from the outset. SDF series 1,000 Tier I or II engines, 4 cylinders, aspired or turbo 12 FWD + 12 REV, 15 FWD + 15 REV or 20 FWD + 20 REV synchronised gearbox 30 or 40 km / h maximum speed Hydrostatic braking on all four wheels Hydrostatic steering with independent pump 2WD and 4WD availability Neatly arranged control levers in the right console. Neatly arranged control levers in the right console. 15

Agrolux 50 60 70 4.80 AgroPLUS F 310 315 320 405 410 420 The compact tractor for the home, yard, garden and leisure Featuring compact dimensions and powerful engines, the Agrolux is equipped with everything that a real tractor has to have. With a lifting force of 3.0 t and two PTO speeds, the Agrolux copes even with demanding tasks in horticulture and landscaping. SDF series 1,000 Tier I or II engines, 3 or 4 cylinders, aspired or turbo Fully-synchronized transmission with 12 / 3 FWD / REV speeds PTO with 2 speeds (540/ 540 E rpm)* Oil-immersed four-wheel disk brakes* Compact construction and low overall height Platform tractor with folding safety bar* * Availability as listed in the national price list. Two transmissions are available: 8 / 2 or 12 / 3 Synchrosplit transmission. Manoeuvrability is second to none, with the steering made easy to handle by a dedicated hydraulic system that renders the action consistently light and responsive under all conditions. One for many With a total of six models and two different wheelbases, the Agroplus F Ecoline is the ideal tractor for many enterprises and applications. Whether for agriculture, garden and cultivation landscaping enterprises, community or private use: efficiency, manoeuvrability and economic consumption are common to all models. SDF series 1,000 Tier III engines, 3 or 4 cylinders, turbo or turbo intercooler, with electronic engine management Possibility to adjust engine speeds and save them to memory at the press of a button 100 % compatible with biodiesel fuel (B100) Synchro gearbox, 30 FWD + 15 REV gears Maximum speed 40 km / h All-wheel braking with oil-bath discs and hydrostatic control Hydrostatic steering with independent hydraulic system 540 / 540 E / 1,000 and groundspeed PTO 16 The driver s cab is tidy and clearly arranged. The driving position is spacious and comfortable, with shift levers located to the right of the seat so that the operator can safely mount and dismount unhindered. 17

AGROMAXX 55 60 DEUTZ-FAHR agrosky Essential and reliable range The Agromaxx models are ideal for all applications mid-heavy duty even in the toughest conditions. 3 cilinders engines up to 60 hp and mechanical transmission with 4 gears and 2 ranges are the product milestone for this tractor family. Cost cutting depending on the precision Direct costs AEK ASG High-precision use on every field Increase income with the Agrosky and reduce labour costs. The satellite-controlled track guide system makes it possible to avoid track overlaps and misses. The absolute forerunner on the market in terms of its precision and user-friendliness. SDF Series 1,000.3 tier I engine, 3 cylinders, aspired 12 FWD + 3 REV mechanically operated gearbox Max speed 30 km/h PTO SPEED: 540 Hydrostatic braking on all four wheels Compact construction and low overall height Footstep tractor with folding safety bar 2 WD or 4 WD version Available also in 4WD version. Surface costs ±30 ±25 ±20 ±15 ±10 ±5 ±2 Precision [cm] ASG offers the maximum savings with a precision of ±2 cm. The userfriendly imonitor 2.0 with 8 or in a 12 touchscreen version. Prevention of track overlapping and omissions Savings of up to 15 % for fertilisers, pesticides and seed Less working hours and substantial fuel savings (up to 20 %) and therefore lowered costs for each job Less strain on the driver, especially for night work and in bad weather Maximum track accuracy and precision ( + /- 2 cm) due to RTK signal Absolute repeatability of driving tracks with ground signal Simple use in hilly terrain due to topographical compensation Agrosky is available with an accuracy of ± 30 cm with Egnos or ± 2 cm with RTK signal and with optical track guidance, steering aid or fully automatic steering control 18 Rear wheels ballast availability. Not only a Simple receiver but an integrated steering Solution. 19

combine harvesters The origins of DEUTZ-FAHR combine harvester production extend far back into the 1860 s. We manufacture combine harvesters with innovative spirit and competence, reliable, highly efficient and maintenance-friendly. Farmers and contractors rest assured, you can also rely on our experience in the future. 20 21

DEUTZ-FAHR SERIES 60 DEUTZ-FAHR 6040 6040 HTS Harvesting with power The five and six straw walker models in the 60 series continue the DEUTZ-FAHR tradition of powerful and reliable DEUTZ-FAHR combine harvesters. The new high-end combine harvesters offer impressive power and practical standard equipment. New Deutz TCD L6 T4i engines ensure great performance and low fuel consumption with power from 169 kw (230 HP) up to 290 kw (395 HP). Auto Control cutter bar management system Multi-segment concave Turbo separator with electrical adjustment Turbine air fan provides consistent, even flow of air Twin step ventilated sieve system Electrical sieve adjustment Up to 9,500 litre grain tank New 750 litre fuel tank and 85 litre AdBlue tank Dual power take-off from engine Hydrostatic pump flange-mounted directly to engine Proportional levelling system All-wheel drive with automatic control Commander Cab IV 22 Modern ab with a new operating console and three-position adjustable steering column. Perfect access to the engine compartment. Excellent view on the header and working area. Professional threshing Harvesting that protects the grain and is productive for crops of all types is also no problem for the 6040 and 6040 HTS. The powerful high capacity threshing unit and 5-straw walkers, provide a high flow rate. With cutting unit widths of up to 6.30 m and the new 6.1 litre DEUTZ T4i engine with 169 kw (230 HP), these are the ideal combine harvesters for farms and contractors who want a fast return of the investment. Multi-segment concave with Optimum Drescher treshing geometry Turbine air fan provides consistent, even flow of air Twin step ventilated sieve system Manual adjsutement of the turbo separator on 5 positions 6,500 litre grain tank Dual power take-off from engine 450 litre fuel tank and 53 lt AdBlue tank Hydrostatic pump flange-mounted directly to engine Commander Cab Evo Maximum visibility guaranteed by the wide glass surface and excellent ergonomic controls 23

DEUTZ-FAHR 6060 HTS CLIMBER DEUTZ-FAHR balance Loss-free threshing even in extreme situations With four-wheel drive and turbo separator as standard, the Climber delivers loss-free and reliable harvesting even in extreme situations. With the proportional levelling system it is possible to compensate for downhill slopes of up to 10 %, uphill slopes of up to 30 % and lateral inclinations of up to 40 %. Heavy-duty cutting units for all types of crop, with cutting widths of 4.80 m, 5.40 m and 6.30 m Central locking and multi-coupling for the cutting unit as standard Turbo separator as standard Four-wheel drive as standard Proportional reel speed with automatic engagement 5 large straw walkers with 4 air-blast chutes and an straw walker surface area of 5.60 m 2 Sifting box with pull out preparation floor and large cleaning surface area of 5.28 m 2 Grain tank volume of 7,500 l Convenient access to the engine and cooler; easier maintenance thanks to central lubrication blocks and large maintenance flaps 24 With four-wheel drive, reinforced brakes and a wider chassis as standard, the Climber maintains a secure hold even on slopes. The levelling proportional functions and the automatic 4WD engagement are managed by one single module. The 25 ton heavy duty axle. The autocontrol system ensures perfect cutting in all slope conditions. Inclines made level In hilly terrain the Balance technology ensures a threshing performance and quality equal to that achieved during harvesting on flat ground. Electronic sensors, acting as a spirit level detect the current combine inclination and immediately pass on the correct control signals to the hydraulic system. The DEUTZ-FAHR Balance combine harvesters maintain their full performance also with lateral inclinations of up to 20 % as well as uphill and downhill slopes of up to 6 %. Optimum harvesting even under difficult conditions Innovative slope compensation With up to 20 % levelling across slopes and up to 6 % up and down Actively controlled header with AutoControl feature Optional automatic cutting angle adjustment for compensation in direction of travel Optimum adaptation of the header to the terrain Constant threshing and separating capacity 25

forage Harvesting Pure, high quality forage. Farmers attach particular importance to this. Professional and powerful technology is available to the modern processing business with the DEUTZ-FAHR forage harvesting programme. 26 27

DEUTZ-FAHR forage harvesting technology DrumMaster Perfect adaptation to the land, a smooth cut, convenient operation and reliability have made DEUTZ-FAHR drum mowers the most successful products on the market. As a genuine trusty workhorse with a convincing reaping quality and tremendous power they have become, in economic terms, a guarantee of a quality forage harvest. FixMaster The increasing trend towards round bale silage in addition to the increasing utilization resulted in a completely new construction of the silage baler at DEUTZ-FAHR: with an increased compression density, a higher bale volume, more throughput, more stability and even more convenience. All this means 1A feed quality with the lowest costs per bale. DiscMaster Always an even number of counter-rotating mowing disks for a clear crop flow, a particularly flat cutter bar with spur drive in addition to the unique kinematics for perfect adaptation to the ground: DiscMaster mower conditioners fulfil the highest demands for technology and performance. The processing quality remains first-class even with crop which is damp or lies on the ground. Three blades per mowing disk are unique in the market. VariMaster Whether silage, hay or straw with the new generation of variable round balers DEUTZ-FAHR once again meets the challenge by providing contractors, machinery rings and farmers with state of the art technology. The uniform bale density, a bale diameter according to requirements, maximum throughput and first-rate operating comfort make the reliable DEUTZ-FAHR balers the tools of choice for professionals. Shown in the illustration is the press / wrap combination which combines two operations in one. To save you time. CondiMaster DEUTZ-FAHR offers a complete range of products for any crop harvesting chain with the CondiMaster. You can choose from eleven different types with working widths of between 4.60 m and 14.00 m with four to ten rotors. BigMaster Uncompromising technology meeting the demand from large farmers and contractors: these big balers from DEUTZ-FAHR are the customer s first choice for a made-to-measure square bale. This is because the precisely shaped bales allow economic transport and efficient warehousing. The new, bigger rotor delivers even higher outputs, while changing the blades is simply child s play thanks to the blade cassettes which can be pulled out at the side. SwatMaster The SwatMaster high-performance rotary swathing machine is characterised by convincing technology, gentle processing of the valuable crop in addition to outstanding operating comfort. The product range extends from the compact single rotary swather to the large quadruple machine. Aside from output per unit area performance the unmistakable features of the SwatMaster series also include perfect adjustment to the ground, top raking quality and setting down in precisely formed swathes. 28 Rotor Loader Wagons A complete range with high load capacities from DEUTZ-FAHR. The range covers load volumes of 22 to 44 m 3 and meets the highest requirements in terms of power, cutting quality and performance. Being particularly good value for money it is a commercially attractive solution for all grassland farmers. New in the range: The RotoMaster rotor loader with a loading volume of 55 m 3 and a payload of 20 t, to round off the range at the top end. 29

trade and service Competent all-round advice is essential. Intensively trained DEUTZ-FAHR dealers offer professional and competent service and ensure that your machines are always ready for operation. Day after day, and round the clock during the harvest too. 30 31

deutz-fahr original parts definitely DEUTZ-FAHR Your finance partner Original service parts are the commonsense solution You put your trust in original products when it came to tractors and machinery. This is why you should also only use original parts for those machines. Because only original parts meet the high DEUTZ-FAHR quality standards and readily guarantee the function, readiness for use and lasting value of your purchase. A smoothly operating parts service DEUTZ-FAHR has always relied on a smoothly operating parts service and makes major investments for continuous improvement in order to fulfil the high demands of dealers, farmers and contractors, since the same rules apply to the parts business as for tractor development: investments are constantly made in employees, data processing and logistical techniques which render excellent service even more efficient and rapid. True-to-deadline supplies throughout the world The central parts warehouse in Lauingen supplies dealers throughout the world from its strategic and central location. The site allows the SDF parts service to deliver urgent orders from throughout the whole of Europe, starting from Portugal to Finland and Greece within 24 hours on every day of the year. The aim is simplicity itself: customers must know that their specialist dealer always has all maintenance parts and appropriate parts available. For all other special needs the central spare parts warehouse in Lauingen, which keeps over 220,000 spare parts, dispatches deliveries within three days, so that interruptions to work are reduced to a minimum. Owing to the excellent relationships with international deliverers, SDF can therefore offer a wide and diverse product range with an excellent price-performance ratio. Premium quality for accessories too DEUTZ-FAHR dealers also maintain a wide range of accessories to meet all requirements. From supplies to cleaning chemicals, from working headlights and driver s seats to nets, yarn and foil, as well as wearing parts and spare parts for other makes. All of the same high quality and at low prices. To save you time and unnecessary effort expended in trying to find the right parts. Our capable consultant team is always there for you. Competent finance partners SAME DEUTZ-FAHR Finance offers professional finance schemes tailored to market prices for all customers on purchase of tractors, combine harvesters or other products of the SAME DEUTZ- FAHR group. The financial services range of offers comprises conventional financing facilities such as credit or leasing. Rental solutions can be drawn up individually. The comprehensive offer is supplemented by insurance. Competent employees are aware of the products and markets and devise individual financing offers in conjunction with the dealer which facilitate decisions on investment and above all adapt the latter to you, the customer. SAME DEUTZ-FAHR Finance works with a competent team of onthe road and office employees, who competently offer customer care to all DEUTZ-FAHR dealers and their customers, whether farmers or contractors. Professional customer care and consultancy Customers are visited by specialists, in order to deal on-site with financing and complete all the necessary formalities. Rapid, competent and uncomplicated. The member of the field service staff organizes all the steps involved, through to successful loan approval. The efficient customer services also assists the customer in all matters relating to exchange of property, change of loan / lessor, plan modifications and other matters concerning the current contract. DEUTZ-FAHR lubricants We recommend new genuine DEUTZ-FAHR lubricants. The outstanding quality of this product range, which is made exclusively for DEUTZ-FAHR, ensures that your tractor always receives exactly what it needs. 32 33

DEUTZ-FAHR same deutz-fahr Production Locations SAME DEUTZ-FAHR (SDF), founded in Treviglio, Italy, in 1927 by Francesco and Eugenio Cassani, is one of the world s leading manufacturers of tractors, harvesters, engines and agricultural machinery. The company s products are sold under the brand names SAME, LAMBORGHINI, DEUTZ-FAHR, LAMBORGHINI GREEN PRO, HÜRLIMANN and GRÉGOIRE. The company strategy, which has long been oriented towards internationalization, combines decentralized production activities with a sales and service network providing extensive coverage of all key markets. Sales, after-sales service and parts distribution are handled by 15 branches, 120 import firms, and 3,000 authorized dealers all over the world. The group s production network is comprised of plants in Europe (Italy, Germany, France and Croatia), one in India, one in Russia and one in China. Furthermore, in Bandirma, Turkey, the production of tractors from 50 to 70 HP has started in co-operation with a local partner. SDF offers a vast range of tractors with models from 23 to 270 HP to meet all types of application requirements. The range of harvesters covers the market s core segments, with models from 100 to 366 HP. Subsidiaries 34

Technical data 36 37

DEUTZ-FAHR Technical data Tractors 179-45 hp Tractors 95-37 hp Agrotron X 710 720 Max. Power kw / hp 184 / 250* 202 / 275 Homologated Power (2,000 / 25 EC) kw / hp 178 / 244 191 / 260 Max. torque Nm 961 1,075 Cylinders / displacement n / cc 6 / 7,146 Lifting capacity kg 10,500 Weight with cab kg 9,430 10,435 Agrotron 165.7 Max. Power Tier II Engine kw / hp 132 / 179 Max. Torque Nm 683 Cylinders / Displacement n /cc 6 / 7,146 Lifting force kg 9,200 Weight kg 5,970 Agrotrac 100 110 115 130 150 170 Max. Power Tier II Engine kw / hp 70.5 / 96 74 / 101 85 / 116 92.6 / 126 114.7 / 156 126 / 171 Max. Torque Nm 367 390 471 479 614 635 Cylinders / Displacement n /cc 4 / 4,000 6 / 6,000 Lifting capacity kg 7,000 Width Min. (mm) 2,000 2,082 2,170 2,170 2,216 2,216 Width Max. (mm) 2,320 2,304 2,670 2,670 2,424 2,424 Weight with cab kg 4,055 4,320 5,450 5,450 5,700 5,700 Weight with platform kg 3,695 3,960 5,700 5,250 5,500 5,500 Agrofarm 410 420 430 Max. Power kw / hp 62.5 / 85 73 / 99 80 / 109 Homologated Power (2,000 / 25 EC) kw / hp 62.5 / 85 73 / 99 80 / 109 Max. torque Nm 320 380 400 Cylinders / displacement n / cc 4 / 4,038 Lifting capacity kg 4,300 5,100 5,300 Width min mm 2,050 Weight with cab kg 3,700 4,050 4,100 Weight with safety frame kg 3,440 3,650 Agrolux 80 85 90 95 100 Max. Power Tier I Engine kw / hp 62.5 / 85 67.7 / 92 Max. Power Tier II Engine kw / hp 54.7 / 74 64.6 / 87 70 / 90 Max. Torque Nm 258 277 348 330 377 Cylinders / Displacement n /cc 4 / 4,000 Lifting force kg 4,200 Weight kg 3,100 3,200 Agrolux 50 60 70 4.80 Max. Power Tier I Engine kw / hp 33 / 45 40.5 / 55 49.3 / 67 53.7 / 73 Max. Power Tier II Engine kw / hp 34.6 / 47 40.5 / 55 51.5 / 70 54.4 / 74 Max. Torque Tier I / Tier II Nm 169.9 / 170 185.4 / 204 261 / 261 270 / 258 Cylinders / Displacement n /cc 3 / 3,000 4 / 4,000 Lifting force kg 3,000 Weight Tier I kg 2,420 2,820 Weight Tier II kg 2,420 2,820 Combine harvesters Agroplus F 310 315 320 405 410 420 Max. Power kw / hp 46 / 62 53 / 72 60 / 82 59 / 80 63 / 85 70 / 95 Homologated Power (2,000 / 25 EC) kw / hp 46 / 62 53 / 72 60 / 82 59 / 80 63 / 85 70 / 95 Max. torque Nm 240 265 310 325 345 373 Cylinders / displacement n / cc 3 / 3,000 4 / 4,000 Lifting capacity kg 2,600 3,000 Width min mm 1,514 Weight with safety frame kg 2,500 2,630 Agromaxx 55 60 Max. Power Tier II Engine kw / hp 50 / 37 55 / 40.5 Max. Torque Nm 234 234 Cylinders / Displacement n /cc 3 / 3,000 Lifting capacity kg 3,000 Weight with safety frame 2 WD kg 1,940 2,090 Weight with safety frame 4 WD kg 2,150 2,300 60 series 6040 6040 HTS Cutting width m 4.20-5.40 4.20; 6.30 Engine kw / hp 164 / 222 173 / 235 Treshing drum diameter / width 600 / 1,270 Turbo separator (TS) - on request Walker area m 2 5.28 7.36 or 8.80 Sieve area m 2 4.22 Grain tank volume l 6,500 60 series 6060 6065 6090 6095 Cutting width m 4.20-6.30 4.80-7.20 5.40-7.20 Engine kw / hp 184 / 250 228 / 310 228 / 310 269 / 366 Treshing drum diameter / width mm 600 / 1,270 600 / 1,521 Turbo separator (TS) on request standard on request standard Walker area m 2 7.36 or 8.80 Sieve area m 2 5.28 6.32 Grain tank volume l 7,500 8,500 Balance 6060 6065 6090 6095 Cutting width m 4.20-6.30 4.80-7.20 5.40-7.20 Engine kw / hp 184 / 250 228 / 310 228 / 310 269 / 366 Treshing drum diameter / width mm 600 / 1,270 600 / 1,521 Turbo separator (TS) standard Walker area m 2 7.36 or 8.80 Sieve area m 2 5.28 6.32 Grain tank volume l 7,500 8,500 38 39