CERTIFICATE OF APPROVAL N CF 119 1 This is t certify that, in accrdance with TS00 General Requirements fr Certificatin f Fire Prtectin Prducts The undermentined prducts f Wilbury Way, Hitchin, Hertfrdshire SG4 0AB Tel: 01462 477600 Fax: 01462 477601 Have been assessed against the requirements f the Technical Schedule(s) dented belw and are apprved fr use subject t the cnditins appended heret: CERTIFIED PRODUCT DORMA TS 90, TS 91, TS 92, TS 9, TS 97 and TS 99 Overhead Munted Dr Clsers TECHNICAL SCHEDULE TS 4 - The Cntributin Of Cntrlled Dr Clsing Devices And Accessries T Fire Resisting Drsets Signed and sealed fr and n behalf f Exva (UK) Limited trading as Warringtn Certificatin Sir Ken Knight Chairman Impartiality Cmmittee Paul Duggan Certificatin Manager Page 1 f 7
1. Drma TS90, TS 91, TS 92, TS 9, TS 97 and TS 99 are verhead munted cam actin dr clsing devices. The TS 92, TS 9 and TS 99 have adjustable pwer. The TS 9 als includes integral back check and delayed actin. The TS 99 is a free swing unit cmplying with EN 11. This apprval relates t the fllwing cnfiguratins: Prjecting arm (Fig. 1) Bdy dr munted n pull face Link-arms Prjecting arm (Fig. 61) Bdy transm munted n push face Parallel arm (Fig. 6) Bdy dr munted n push face Bdy dr munted n pull face Bdy transm munted n push face Slide arms Bdy dr munted n push face Bdy transm munted n pull face TS 90 TS 91 B TS 92 B TS 92 G TS 9 B 2- TS 9 G 2- TS 9 B -7 TS 9 G -7 TS 97 TS 99 FL G-EMF G-EMR GSR GSR EMF GSR EMR Key: - apprved - Nt apprved Nte: Where alternative arms fr nn-fire applicatins are included within the packaging, the use f these cmpnents n fire resisting dr assemblies will invalidate the certificatin. 2. This certificatin is designed t demnstrate cmpliance f the prduct r system specifically with Apprved Dcument B (England and Wales), the Technical Handbks (Sctland) and Technical Bklet E (N. Ireland). If cmpliance is required t ther regulatry r guidance dcuments there may be additinal cnsideratins r cnflict t be taken int accunt. Page 2 f 7 Signed
. This apprval relates t its use with the fllwing dr assemblies:- Latched and unlatched, intumescent sealed dr assemblies cnsisting f timber faced and edged leaves with timber, cellulsic r mineral cres in timber frames having a fire resistance up t 120 minutes (Cde ITT). Latched and unlatched dr assemblies (intumescent sealed r nnintumescent sealed) cnsisting f uninsulated r insulated metal dr assemblies in metal frames, having a fire resistance f up t 240 minutes (IMM and MM)*. Latched and unlatched, intumescent sealed dr assemblies cnsisting f timber faced and edged leaves with timber, cellulsic r mineral cres in steel frames having a fire resistance up t 120 minutes (Cde ITM)*. * G-EMF, G-EMR, GSR EMF and GSR EMR accessries are nt apprved fr use with uninsulated steel dr assemblies, r ITM dr assemblies with uninsulated steel frames. 4. The clsers are apprved n the basis f: i) Initial type testing t EN114 and BS EN 164-1. ii) An appraisal against TS4 iii) Inspectin f quality management system iv) Inspectin and surveillance f factry prductin cntrl v) Onging audit testing in accrdance with EN 114 requirements. This apprval is applicable nly t the specified clsers used with dr assemblies f prven fire resistance (as defined in BS EN 164-1 r BS 476: Part 22: 1987) and having pwer ratings apprpriate t the leaf sizes subject t a minimum size (as specified in BS EN 114). 6. The apprval relates t n ging prductin. The prduct and/r its immediate packaging is identified with the manufacturer s name, the prduct name r number, the CERTIFIRE name r name and mark, tgether with the CERTIFIRE certificate number and applicatin where apprpriate. Page f 7 Signed
7. The fllwing table shws acceptable drsets types and fire resistance perids: Apprved Dr Type Class IMM MM ITT ITM ITC FD20 FD0 FD60 FD120 FD240 * * E 20 EI 20 E 0 EI 0 E 60 EI 60 E 90 EI 90 E 120 EI 120 E 240 * * EI 240 * * Key: - apprved - Nt apprved * - G-EMF, G-EMR, GSR EMF and GSR EMR accessries are nt apprved fr use with uninsulated steel dr assemblies, r ITM dr assemblies with uninsulated steel frames. Page 4 f 7 Signed
8. Drs are classified as the fllwing types: Type IMM - 20 minute t 240 minute drsets that cnsist f metallic leaves in metallic frames that cntain intumescent materials in the frame t leaf gap. Type ITT - 20 minute t 120 minute drsets cntaining intumescent seals and cnsisting f nn-metallic faced and edged leaves hung in timber frames Type ITM - 20 minute t 120 minute drsets cntaining intumescent seals and cnsisting f nn-metallic faced and edged leaves hung in metal frames. Type ITC - 20 minute t 120 minute drsets cntaining intumescent seals and cnsisting f nn-metallic faced and edged leaves hung in prprietary cmpsite frames, f which the principal material is ther than timber r metal but which may include any ther materials. Scpe f Apprval: Drs may nt include uninsulated glass abve 20% f their ttal area. All clser mdels are nly apprved in the fitting applicatins detailed with their classificatin cdes. Mechanical hld pen ptin is nt apprved. Classificatin cdes The apprval prvides the fllwing classificatins: Drma TS 90 Dr leaf munted pull side and transm munted pull side nly: 8 1 1 Drma TS 91 B Dr leaf munted pull side and transm munted push side nly (mdel suffixed B) 9. 4 8 1 1 Page f 7 Signed
Classificatin cdes (cntinued) Drma TS 92 B & TS 92 G Dr leaf munted pull side and transm munted push side (mdel suffixed B) Dr leaf munted push side and transm munted pull side (mdel suffixed G) 4 8 4 1 1 Drma TS 9 B & TS 9 G (EN 2-) Dr leaf munted pull side and transm munted push side (mdel suffixed B) Dr leaf munted push side and transm munted pull side (mdel suffixed G) 4 8 1 1 4 Drma TS 9 B/G EN -7 Dr leaf munted pull side (mdel suffixed B) Transm munted pull side (mdel suffixed G) 4 8 7 1 1 4 Drma TS 97 Dr leaf munted pull side and transm munted pull side nly 8 4 1 1 Drma TS 99 FL EN 2- (EN11) Standard r Tp jamb Installatin Dr leaf munted pull side and transm munted pull side nly 8 1 1 Page 6 f 7 Signed
Accessries The fllwing accessries are apprved fr use with the TS 91, TS 92 and TS 9: G-EMF Electr-mechanical hld-pen G-EMR Electr-mechanical hld-pen and integral smke detectr GSR Standard dr c-rdinatr GSR EMF Dr c-rdinatr with electr-mechanical hld-pen GSR EMR Dr c-rdinatr with integral smke detectr Classificatin f these slide arm channels is given as fllws: G-EMR & G-EMF Clser bdy dr leaf munted pull side and dr leaf munted push side nly 8 1 1 GSR, GSR-EMR & GSR-EMF Clser bdy dr leaf munted pull side nly 8 1 1 Nte 1: Where ne f the abve slide arm channels are used in cnjunctin with a clser mdel having a differing classificatin cde, the lwer cde shall apply. Nte 2: G-EMF, G-EMR, GSR EMF and GSR EMR accessries are nt apprved fr use with uninsulated steel dr assemblies r ITM dr assemblies with uninsulated steel frames. Further Infrmatin Further infrmatin regarding the details cntained in this data sheet may be btained frm Drma UK Limited (Tel: 01462 477600). Further infrmatin regarding CERTIFIRE certificatin and ther apprved prducts can be btained frm CERTIFIRE (Tel: 0192 646777). Page 7 f 7 Signed