out Recycling Material Enclosed Recycling Collectors Recycle Bins and Lids 67-69 70 Bin Carrier haliroll 71 Waste Carts halinorm 72 Waste Collector Straubing plus 73-74 Polymer Container and Labels 75 Recycling Collector haliwert 76 66 Hammerlit GmbH
Closed Recycling Collector WSLK Smooth, easy to clean front panels and seamless body are just some of the features this series of collectors has to offer. These carts are outfitted with tilt out bins that can be opened by using the pedal at the bottom. The individual containers are removable through the rear of the cart. The bins have an approximate 43- litre capacity (see page 70). The open bottom construction minimizes the soiling of the collector due to incorrect waste insertion. WSLK 330C with individual colour coded lacquered panels To meet individual requirements the carts are available in different designs: As standard the body of the cart is made of STAINLESS STEEL. Bins are not included. On request they are also available with coloured front panels. The fully one coloured versions of these carts are made of ALUMINIUM with polymer handles and the standard colour is grey (RAL 7035) WSLK 330A ALUMINIUM, light grey Additional colours are available : - Dark Grey (charcoal) (RAL 7016) - Green (RAL6032) - Blue (RAL 5012) - Yellow (RAL 1016) - Red (RAL 3020) Castors: 75 mm diameter, rubber, 4 swivel castors, 2 with brake Castor housing: zinc-chromatised Containers: Polypropylene (43 litre capacity) WSLK 440, STAINLESS STEEL The table gives you an overview over the different model numbers: Bins not included. Design Dimensions Model # Width x Depth x Height STAINLESS STEEL STAINLESS STEEL ALUMINIUM ALUMINIUM STAINLESS STEEL colour coded light grey colour coded fire retardant front panels (RAL) (RAL) version Single collector 390 x 550 x 785 mm WSLK 110 WSLK 110 C WSLK 110 A WSLK 110 AC WSLK 110 F Double collector 730 x 550 x 785 mm WSLK 220 WSLK 220 C WSLK 220 A WSLK 220 AC WSLK 220 F Triple collector 1070 x 550 x 785 mm WSLK 330 WSLK 330 C WSLK 330 A WSLK 330 AC WSLK 330 F Quadruple collector 1410 x 550 x 785 mm WSLK 440 WSLK 440 C WSLK 440 A WSLK 440 AC WSLK 440 F Matching bins WSB 5000 WSB 5008 see page 70 67 Hammerlit GmbH Hammerlit GmbH 67
Closed Recycling Collector WSLK Fire retardant model WSLK 220 F WSLK 333 Custom units, like the WSLK 333 pictured here, are available to suit specialized applications. Please consult your Hammerlit representative. WSLK 333 Dimensions: Width x Depth x Height =1090 x 550 x 1070mm All models are also available in a fire retardant version with a closed bottom and rear panel. The rear panel adds an extra of 30 mm to the overall depth of the unit, height of 25 mm. Closed Recycling Collector WSLQ Another version of the closed recycling collector with tilt out bins is our model WSLQ. This collector, which is specially designeåd for narrow places, has a depth of only 400 mm. The containers are removable through the front panels of the cart via a new second angle of the opening mechanism. WSLQ 220 Design Dimensions Model # Width x Depth x Height Single collector 540 x 400 x 785 mm WSLQ 110 Double collector 1050 x 400 x 785 mm WSLQ 220 Triple collector 1535 x 400 x 785 mm WSLQ 330 Matching containers WSB 5000 WSB 5008 see page 70 68 Hammerlit GmbH Containers easy removable through front penals. Lift pedal before opening and reach second angle to remove bin easily! Hammerlit GmbH 68
Closed Waste Collector These closed waste collectors are equipped with pedal lids. For emptying bins or sorting bags, the front door can be pulled out like a drawer. These collectors are equipped with a noise absorbing lid damping. On request, the front doors are available in a coloured, lacquered design for a surcharge. (RAL-colour) Material: STAINLESS STEEL Wheels: ø 75 mm, all rubber, 4 swivel castors, 2 with brake Castor housing : zinc-chromatised Bins: Polypropylene, 43 litres * Bins not included. Please order bins seperately. Depth by pulled out container 950 mm. WSB 5000 WSB 5008 (see page 70) WSLT 202 WSLT 110, WSB 5004 WSLT 101 Design Number of Dimensions mm Model # 43-litre-bins* 70-Litres-bags Lenght x Depth x Height Single collector 0 1 430 x 550 x 850 (1275) WSLT 101 1 0 WSLT 110 Double collector 0 2 WSLT 202 1 1 825 x 550 x 850 (1275) WSLT 211 2 0 WSLT 220 Triple collector 0 3 WSLT 303 1 2 1200 x 550 x 850 (1275) WSLT 312 2 1 WSLT 321 3 0 WSLT 330 Quadruple 2 collector 0 4 WSLT 404 1 3 WSLT 413 2 1575 x 550 x 850 (1275) WSLT 422 3 1 WSLT 431 4 0 WSLT 440 Hammerlit GmbH 69
Recycle Bins (43 l) Recycle Bins and Lids This line of containers was specially developed for the Hammerlit waste management system. This system encompasses in house transport and waste sorting. The containers are easily cleanable in any facility. Features: 2 sturdy integrated handles 2 additional integrated handles in the bottom of the container to facilitate emptying. Integrated moulds to accommodate our slide system (see page 73). Drainage holes on ridges and handles Stackable, both with and without lids. Material: Polypropylene Dimensions: 305 x 445 x 515 mm (W x D x H) Lids We recommend that all containers should have lids. The Hammerlit lid is constructed of impact resistant anti- static polymer. The integrated handle is easy to clean and allows an ergonomic handling. Lids are available in the following versions. 1. Lids with integrated hook (D60-D68) The inside of the lid is equipped with a hook to allow the lid to be hanged on the container when opened (see picture). 2. Lids with integrated hinge (DT60-DT68) This Hammerlit version of lid is outfitted with an integrated one piece moulded hinge. This avoids having spaces in which dirt can accumulate. Contrary to other similar lids in the industry, the Hammerlit lids are outfitted with an overload security device, which prevents the hinge from braking under stress. Model # Container Lid Hinged Container with Colour Lid Hinged Lid white WSB 5000 D 60 DT 60 WSB 5060 green WSB 5001 D 61 DT 61 WSB 5061 blue WSB 5002 D 62 DT 62 WSB 5062 red WSB 5003 D 63 DT 63 WSB 5063 yellow WSB 5004 D 64 DT 64 WSB 5064 brown WSB 5005 D 65 DT 65 WSB 5065 grey WSB 5007 D 67 DT 67 WSB 5067 black WSB 5008 D 68 DT 68 WSB 5068 In order to achieve a maximum level of cleanliness and hygiene, we recommend that our containers be used with our garbage bags (see page 76), if containers are not washed during each cycle. 70 Hammerlit GmbH
haliroll Bin Carrier WSR 531 WSR 532 2x WSR 532 With the haliroll bin carrier the Hammerlit recycle bins can be used as independant, mobile collecting units.-the frames can be joined together to make various units.this combination consisting of bins and haliroll frames makes it possible to easily assemble a practical collecting unit.no tools or screws are needed to join the frames together. The construction enables one frame to simply be hitched to another one. The mobil frame is made of STAINLESS STEEL wire, extremely strong and easy to clean. It is equipped with four swivel castors, Ø 50 mm, plastic wheels and galvanized chrome-plated casings. Each haliroll frame has a storage slot on the side to hold a lid. Example of a sorting unit, consisting of 2 double frames. Construction Dimensions (W x D x H) Model # Single frame, without bins 370 x 340 x 160 mm WSR 531 Double frame, without bins 670 x 340 x 160 mm WSR 532 Triple frame, without bins 995 x 340 x 160 mm WSR 533 Plastic bins and lids on page 70, labels on page 75. NEW: with lid-damping Bin carrier with pedal mechanism to carry 1, 2, 3 or even 4 WSB bins series 5000 ( see also page 70). Please order lids and recycle bins separately. Material: Stainless Steel 4 swivel castors ø 75 mm Construction Dimensions Model# Model# (W x D x H) with lid damping Single collector 400 x 500 x 720 WSBF 1LT WSBF 1LTD Double collector 765 x 500 x 720 WSBF 2LT WSBF 2LTD Triple collector 1115 x 500 x 720 WSBF 3LT WSBF 3LTD Quadruple coll. 1465 x 500 x 720 WSBF 4LT WSBF 4LTD Hammerlit GmbH 71
WSN 1300 WSN 1400 WSN 1500 halinorm Waste Carts The basic models of the series halinorm differ in size and the number of boxes. Two (300 x 400 mm) boxes can be used instead of one (600 x 400 mm) box. Standard models are equipped with upper frames and cover plates. All boxes have to bee ordered seperately. WSN 2100 WSN 2200 WSN 2300 WSN 2400 WSN 2500 WSN 4100 WSN 4200 WSN 4300 WSN 4400 WSN 4500 The labels shown and containers in the illustration are not included with the carts (see page 75 for label ordering information). When placing an order, please don t forget to specify the colour of the boxes. Container dimensions Dimensions of collector No. of boxes Model # mm L x W x H (mm) Height 325 mm Height 220 mm Size 1 390 x 455 x 1160 1x WSNK 343* 2x WSNK 342* WSN 1300 300 x 400 390 x 455 x 1070 3x WSNK 342* WSN 1400 390 x 455 x 1025 2x WSNK 343* WSN 1500 Size 2 400 x 600 72 Hammerlit GmbH 490 x 645 x 1370 3x WSNK 463* WSN 2100 490 x 645 x 1270 2x WSNK 463* 1x WSNK 462* WSN 2200 490 x 645 x 1160 1x WSNK 463* 2x WSNK 462* WSN 2300 490 x 645 x 1070 3x WSNK 462* WSN 2400 490 x 645 x 1025 2x WSNK 463* WSN 2500 700 x 455 x 1370 6x WSNK 343* WSN 3100 Size 3 700 x 455 x 1270 4x WSNK 343* 2x WSNK 342* WSN 3200 2 x 300 x 400 700 x 455 x 1160 2x WSNK 343* 4x WSNK 342* WSN 3300 700 x 455 x 1070 6x WSNK 342* WSN 3400 700 x 455 x 1025 4x WSNK 343* WSN 3500 895 x 645 x 1370 6x WSNK 463* WSN 4100 895 x 645 x 1270 4x WSNK 463* 2x WSNK 462* WSN 4200 Size 4 895 x 645 x 1160 2x WSNK 463* 4x WSNK 462* WSN 4300 2 x 400 x 600 895 x 645 x 1070 6x WSNK 462* WSN 4400 895 x 645 x 1025 4x WSNK 463* WSN 4500 Please replace * by colourcode 0 to 7 (see page 75).
Straubing plus Series Waste Collectors WSP 110 WSP 210 WSP 330 WSP 410 with pedal mechanism WSP 540 The Straubing plus series offers a variety of possibilities (see chart on page 73). All models consist of STAINLESS STEEL frames, swivel castors and corner bumpers. These carts are available standard from single up to quadruple wide units. Every unit has slides to accommodate one 43 litre container. Lids and containers have to be ordered seperately (see page 70). An optional grip ring assembly for holding bags and nets can also be added to any bay. These assemblies are outfitted with hinged lids and the Hammerlit HR 2000 grip ring. Since these assemblies can be added and removed easily, the units can be re-configured at will to suit your changing needs. Bag and net holder assemblies are also available for mounting on the side of the units. As an option, the carts can be outfitted with an optional pedal mechanism and lid damping (as seen on page 17). Lids, containers, bins see page 70 and 75. Design Single wide collector Wall mount collector Double wide collector Triple wide collector Quadruple wide collector Linear Fivefold wide collector Sixfold wide collector Matching containers Matching lids Dimensions Model # with number of containers Bottom (w x d x h) mm without one two three four pan 450 x 475 x 940 WSP 100 WSP 110 PWS 100 450 x 380 x 290 WSP 109 WSP 119 800 x 475 x 940 WSP 200 WSP 210 WSP 220 PWS 200 1140 x 475 x 940 WSP 300 WSP 310 WSP 320 WSP 330 PWS 300 1480 x 475 x 940 WSP 400 WSP 410 WSP 420 WSP 430 WSP 440 PWS 400 1795 x 475 x 940 WSP 500 WSP 510 WSP 520 WSP 530 WSP 540 PWS 400 2110 x 475 x 940 WSP 600 WSP 610 WSP 620 WSP 630 WSP 640 PWS 400 WSB 5000 WSB 5008 see page 70. DT 60 DT 68 see page 70. Bottom pan* The collectors shown in the above table are without bottom pan. All collectors are also available with a removable anti static bottom pan. * Bottom pan not available in combination with pedal mechanism. Hammerlit GmbH 73
Straubing plus Series Waste Collectors Added versatility to the Straubing plus line can be achieved by combining it with our WSA collectors as shown below. All versions of the Straubing plus cart can be outfitted with this add on unit at each side. WSA 13 WSP 310 WSA add on unit without containers Model # WSA 13 Every bay of a Straubing plus collector is covered by a hinged lid. These are available in a wide range of colours (see page 70). Please order the lids seperately. The lids are easily cleanable due to their smooth surface. All lids can also be ordered with cut out openings in circular or oval form, to accommodate specific types of waste. These cut out openings offer the following advantages: 1. The lid does not have to be lifted to dispose of items. 2. The opening has the approximate shape and size of the goods to be thrown in (e.g. oval for paper and round for bottles). In addition to the colour coding and labelling of the lids, this provides extra security for efficient waste sorting. In the case of some types of waste, for example flowers or miscellaneous waste, a cut out open this sort is neither recommended or practical. For applications such as these, we recommend a hinged lid without opening. The number of grip rings results by deducting the number of containers from the total number of bays. E.g. the fivefold wide collector with two containers has 3 grip rings. Please do not forget to mention: Small diagramm is recommended e.g. 1. Colour of lid Quadruple collector 2. Shape of opening (if necessary) WSP 420 3. Arrangement of lids 4. Colours of containers container container brown blue yellow green 74 Hammerlit GmbH
Polymer Containers and Labels Polymer containers for the halinorm system and for Straubing plus collectors Five different sizes of containers are available in a variety of heights, widths and depths. There is also a choice of 7 colours and adhesive labels are also available for different categories of waste. Size Capacity Model # (W x D x H) in Litres white (0) green (1) blue (2) red (3) 300 x 400 x 125 12 300 x 400 x 220 21 WSNK 3420 WSNK 3421 WSNK 3422 WSNK 3423 300 x 400 x 325 31 WSNK 3430 WSNK 3431 WSNK 3432 WSNK 3433 400 x 600 x 220 45 WSNK 4620 WSNK 4621 WSNK 4622 WSNK 4623 400 x 600 x 325 66 WSNK 4630 WSNK 4631 WSNK 4632 WSNK 4633 Size Capacity Model # (W x D x H) in Litres yellow (4) brown (5) grey (7) 300 x 400 x 125 12 WSNK 3417 300 x 400 x 220 21 WSNK 3424 WSNK 3425 WSNK 3427 300 x 400 x 325 31 WSNK 3434 WSNK 3435 WSNK 3437 400 x 600 x 220 45 WSNK 4624 WSNK 4625 WSNK 4627 400 x 600 x 325 66 WSNK 4634 WSNK 4635 WSNK 4637 Adhesive Labels (Size = 160 x 140 mm) Colour Text Model # Colour Text Model # Colour Text Model # Glass EKN 10 Aluminium EKN 31 green Glass EKN 101 Brown glass EKN 11 Misc. Waste EKN 40 blue Paper EKN 422 Green glass EKN 12 Flowers EKN 41 yellow Plastic EKN 204 white Clear Glass EKN 13 white Paper EKN 42 brown Bio Degradables EKN 455 Coloured Glass EKN 14 I. V. bags EKN 19 grey Misc. Waste EKN 407 Plastic EKN 20 Bio Degradables EKN 45 Foils EKN 21 Waste EKN 43 Metal EKN 30 Compost EKN 48 Custom labelling available. Refundables EKN 39 Batteries EKN 38 Please contact your Hammerlit representative. Hammerlit GmbH 75
haliwert Recycling Collector Carriage of HLW 20F and HLW 21F HLW 31F with insert for bottles HLW 40F Model Dimensions mm Model # Width Depth Height Height Height without with with without with with lid lid lid handle lid lid open lid Double collector 9 Litres 340 390 360 450 550 HLW 920 FHLW 921 F with two bins 14 Litres 380 450 450 520 680 HLW 20 F HLW 21 F Triple collector 9 Litres 340 540 360 450 550 HLW 930 FHLW 931 F with three bins 14 Litres 380 630 450 520 680 HLW 30 F HLW 31 F Quadruple 9 Litres 340 710 360 450 550 HLW 940 collector with FHLW 941 F four bins 14 Litres 380 830 450 520 680 HLW 40 F HLW 41 F Bin 9 Litres 280 170 265 355 455 WSB 5090H WSB 5190 Bin 14 Litres 335 200 325 420 530 WSB 4040H WSB 4140 Insert for bottles for 9 Litres-bins (2 bottles Ø max. 90 mm) HLWE 2 Insert for bottles for 14 Litres-bins (6 bottles Ø max. 90 mm) HLWE 6 Please order labels separately (page 75) All-plastic fastener Plastic bags Polyethylene, covered colouring Accessories waste sorting Model # Size (mm) unit/ colour Gauge (mm) Set green blue red yellow brown grey black 450x500 1000 P 2 0,04 BLAU 400x600 500 P 3 0,06 BLAU 500x800 250 P 4 P 4 0,06 BLAU ROT 575x1000 250 P 12 0,06 BLAU 600x1000 250 P 71 P 72 P 73 P 74 P 75 P 77 P 78 0,05 700x1100 250 P 20 0,06 BLAU 630x800 720 transparent for bins WSB 5000 P 50 0,02 Model # Pack of 1000 fasteners MS 04 ROT Drill-twister and wire ties see page 58, sorting nets see page 8. 76 Hammerlit GmbH