Machine for Industrial Applications A C litronic` Operating Weight:,, lb Engine Output: hp / kw
Technical Data Engine Rating per ISO hp ( kw) at rpm Model Liebherr D S according to level IIIA / Tier Type cylinder in-line Bore/Stroke./. in Displacement in Engine operation -stroke diesel unit pump system turbo-charged and after-cooled reduced emissions Cooling system water-cooled and integrated motor oil cooler Air cleaner dry-type air cleaner with pre-cleaner, primary and safety elements Fuel tank gal Engine idling sensor controlled Electrical system Voltage V Batteries x Ah/ V Alternator three phase current V/ A Hydraulic System Hydraulic pump Liebherr, variable displacement, swash plate double pump Max. flow x gpm Max. hydr. pressure,76 psi Hydraulic pump regulation and control Liebherr-Synchronic-Comfort-system (LSC) with electronic engine speed sensing regulation, pressure and flow compensation, load sensing and torque controlled swing drive priority Hydraulic tank capacity 6 gal Hydraulic system capacity max. gal Filtration one main return filter with integrated partial micro filtration ( µm) Cooling system cooler unit, consisting of radiator for engine coolant with after-cooler core, sandwiched with cooler for hydraulic fluid and fuel with hydrostatically controlled fan drive Modes adjustment of machine performance and the hydraulics via mode selector to match job application (Note: All modes provide full max. power) LIFT for precise lifting tasks FINE for precision work and lifting with sensitive movements ECO for economical operation POWER for max. output Super-Finish additional operator adjustable work speed function for further increased feathering. Applies to all modes and all control functions RPM adjustment step less adjustment of engine output via rpm Tool Control (Option) ten pre-adjustable pump flows and pres - sures for add on tools Hydraulic Controls Power distribution via control valve with integrated safety valves, simultaneous and independent operation of travel drive, swing drive and work Control type Attachment and swing proportional via joystick levers Travel proportional via foot pedal Additional functions via joystick push buttons or foot pedals Swing Drive Drive Liebherr swash plate motor with torque control and integrated brake valve Transmission Liebherr compact planetary reduction gear Swing ring Liebherr sealed single race ball bearing swing ring, internal teeth Swing speed. rpm Swing torque, lbf ft Holding brake wet discs (spring applied pressure released) Option pedal controlled positioning brake Operator s Cab Cab resiliently mounted, sound insulated, tinted windows, front window stores overhead, door with sliding window Operator s seat fully adjustable, shock absorbing suspension, adjustable to operator s weight and size, 6-way adjustable Liebherr seat Joysticks integrated into adjustable seat consoles Monitoring menu driven query of current operating conditions via the LCD display. Automatic monitoring, display, warning (acoustical and optical signal) and saving machine data, for example, engine overheating, low engine oil pressure or low hydraulic oil level Air conditioning standard air conditioning, combined cooler/heater, additional dust filter in fresh air/recirculated Noise emission ISO 66 L pa (inside cab) = 7 db(a) //EC L WA (surround noise) = db(a) Sound level in correspondence with Blue Angel guidelines. Undercarriage Drive variable flow swash plate motor with automatic brake valve Transmission oversized two speed power shift trans - mission with additional creeper speed Travel speed.6 mph (creeper speed off road)). mph (off road).6 mph (creeper speed on road). mph (road travel) Axles, lb excavator axles; automatic or operator controlled front axle oscillation lock Brakes steering and rigid axle with wet, mainte - nance-free multi disc brakes with minimized backlash. Spring applied/pressure released parking brake integrated into gear box Stabilization -point outriggers Attachment Type high-strength steel plates at highly stressed points for the toughest requirements. Complex and stable mountings of attachment and cylinders. Unrivalled strength, even at high loads Hydraulic cylinders Liebherr cylinders with special seal system. Shock absorption Pivots sealed, low maintenance Lubrication Liebherr semi-automatic central lubrication system A C Litronic Machine for Industrial Applications
Dimensions E D A W H C K Q T X V L U Z M T B B I J Q U T B B R R ft in A B B B B* C D E H I J K L M Q R R T T T U 7 U 6 Z 6 Industrial Industrial-Type Industrial-Type Stick Straight Boom Gooseneck Boom Prop up pt. Prop up pt. blade outr. blade outr. ft in ft in ft in ft in ft in V 6 6 6 * * W 7 7 6 6 7 * 6 6 * X 6 6 6 * 6 * Dimensions are with attachment over steering axle * Attachment over digging axle for shorter transport dimensions * = EW-undercarriage/Standard cab E = Tail radius Tires.- A C Litronic Machine for Industrial Applications
Industrial Attachment for Scrap Handling with Straight Boom ft m 7 Attachment Envelope Industrial-type straight boom pinned in rear bearing of boom foot bracket with industrial stick with industrial stick 6 with industrial stick and grapple model 6 with industrial stick 6 and grapple model 6 6 Operating Weight The operating weight includes basic machine A C litronic` with pt. outriggers, hydr. cab elevation, solid tires plus spacer rings and industrial attachment with industrial-type straight boom. with grapple model 6/.7 yd semi-closed tines Weight and industrial stick, lb and industrial stick 6, lb - - - - - - - - - -6-7 7 6 m ft A C Litronic Machine for Industrial Applications
Lift Capacities for Scrap Handling with Straight Boom Industrial Stick ft ft ft ft ft ft ft Undercarriage ft in pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down, 6,*,,* 6,* 6,*,*,*,6,6*,,,,,6*,6* 6,* 6,*,6*,6*,,*,,,7,, 7,7,*,* 6,* 6,*,,*,,*,,*,,,6,7, 7,,6 6,6,*,* 6,* 6,*,,*,,,,*,,7*,7, 7,6,,,, 7,,,,7*,7*,*,* 6, 7,7*,6,*,7, 7,,* 6,* 6,*,, 6,,,,,7 6,,,6 6,* 6,*,*,*,7,*,,6*,, 7,,, 7,7 6,,7,6,6, 6,6,,,,6*,,*,,*,,* 6,,6*, 6,7*,,,,, 6,,, 6,7* 6,7*, 7,*,,*,,* 6, 7,*, 6,,6,,,, 6,, 6, 7,* 7,*,*,*,,*,*,* 7,7* 7,7* 7 6 7 Industrial Stick 6 ft ft ft ft ft ft ft Undercarriage ft in pt. outriggers down,*,*,*,*,*,*,*,* 7 pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down,7,7* 6,,*,7*,7*,*,*,,* 6,,, 7,7,*,*,*,*,*,*,, 6,,, 7,, 6,,*,*,,*,,* 7,6* 7,6*,6,,,, 7,,,,6*,6*,,*,,6* 6, 7,*,7,*,,7,,6, 7,,,,6,,*,* 6,6* 6,6*,,*,,7* 6,, 6, 7,*,,*,, 7,,,,,7 6,,,,,,*,*,*,* 6, 7,6*,,*,6,6 6,7, 6, 7,* 6,* 6,*,, 6,,,6,7, 6,6,7,,,7 6,* 6,*,,*,,*,,*,, 6,6,, 7,7*,*,*, 7,,,,,, 6,,6,,,7,*,*,*,*, 7,7*,,*,,* 6,,* 6, 6,*,*,* 7, 6,,,,,, 6,,6,,,,*,*,*,*,,*,,* 7,,* 6, 6,* 6,* 6,*,,, 7,, 6,7,6*,6*,*,*,*,* 6 6 7 7 6 7 7 Height Can be slewed through 6 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities are stated in pounds (lb) on the stick tip without attachment and are valid on firm, level supporting surface with blocked oscillating axle. These capacities can be lifted 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. A C Litronic Machine for Industrial Applications
Industrial Attachment for Loose Material with Gooseneck Boom ft m 7 Attachment Envelope Industrial-type gooseneck boom pinned in rear bearing of boom foot bracket with industrial stick with industrial stick 6 with industrial stick and clamshell model B with industrial stick 6 and clamshell model B 6 Operating Weight The operating weight includes basic machine A C litronic` with pt. outriggers, hydr. cab elevation, solid tires plus spacer rings and industrial attachment with industrial-type gooseneck boom. with clamshell model B/. yd shells for loose material and industrial stick and industrial stick 6 Weight, lb, lb - - - - - - - - - -6-7 7 6 m ft 6 A C Litronic Machine for Industrial Applications
Lift Capacities for Loose Material with Gooseneck Boom Industrial Stick ft ft ft ft ft ft ft Undercarriage ft in pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down,*,*,*,*,,*,6,*,,6*,*,*,*,*,6*,6*, 7,*,7,,,,,7* 7,* 7,*,*,*,*,*,7*,7*,,*,,,,,6,,*,*,6*,6*,,7*,*,*,,*,6,6*,,,6,7, 7,, 7,,*,*,6*,6* 6,6* 6,6*,,*,,*,,6*, 6,*,, 7,,,,, 7,,6 6,6 6,* 6,*,*,* 6, 7,*,6,*,7,,,*,*,*,, 6,,,,, 6,, 6,,*,*,,*,6,6*,,7*,6,6,,7*,*,*, 7, 6,,,7,7,6 6,, 6,,*,*,,7*,,*,,*,,*,,*, 7, 6,,,,,7 6,,6*,6*,7 6,*,7,6*,7,* 6 Industrial Stick 6 ft ft ft ft ft ft ft Undercarriage ft in pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down,*,*,*,*,*,*,*,*,,* 6,,* 6,,*,*,*,*,*,*,*,,* 6,,,6 7,6*,*,*,7*,7* 7,6* 7,6*,,* 6,,, 7,, 6,,*,*,6,6*,,* 7,* 7,*, 7,*,,,,, 7,, 6, 7,* 7,*,*,*,,*,,6* 7,* 7,*,7,*,,* 7,,,,, 7,,,7,*,*,*,* 6,6* 6,6*,,*,,* 7, 7,6*,,*,, 7,,6,,, 6,,,,*,*,*,*, 7,*,,*,6,6 6,,*,*,*,, 6,,,7,7,6 6,7,,,*,*,7,*,,*,,*,, 6,,*,*,*,6 7,,,,,, 6,,,,*,*,,7*,6 7,*,6,6*,,* 7,,6*, 7,,,,,, 7,,*,*,,*,,6*,,* 7 6 7 6 Height Can be slewed through 6 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities are stated in pounds (lb) on the stick tip without attachment and are valid on firm, level supporting surface with blocked oscillating axle. These capacities can be lifted 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. A C Litronic Machine for Industrial Applications 7
Industrial Attachment for Wood Handling with Gooseneck Boom ft m 7 Attachment Envelope Industrial-type gooseneck boom pinned in rear bearing of boom foot bracket with industrial stick with industrial stick 6 with industrial stick and wood grapple with industrial stick 6 and wood grapple 6 Operating Weight The operating weight includes basic machine A C EW litronic` with prop-up blade, without cab elevation, tires plus spacer rings and industrial attachment with industrial-type gooseneck boom. with wood grapple, in rotary drive with motors Weight with industrial stick, lb with industrial stick 6,7 lb - - - - - - - - - -6-7 7 6 m ft A C Litronic Machine for Industrial Applications
Lift Capacities for Wood Handling with Gooseneck Boom Industrial Stick ft ft ft ft ft ft ft Undercarriage ft in pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down,6*,6*,6*,6*,6*,6*,7,* 7,7,* 7,6,6*,,*,,*,,6*,*,*,7,*,,6*, 7,* 7,,,,,,, 7,*,7,*,,*,7,7* 6, 7,*,,* 6,6,* 6,,7*,,* 7,7,,,, 6,,7,*,,6*,,7*,6,*,6,*,6,6* 6,6,,,*,,*,, 7,,, 7,,,,,7,,*,,6*, 6,6*,,,,,,6*,*,*,6,6*, 6,6* 6,,,6,,,,,, 6, 6,6,7,6 7,6,,6,,, 6,*,,* 7, 7,*,,6,,,,, 6,*,,*, 7,* 6,,6,,,,7,*,*,, 6,,, 7,,,,,,*,*,,* 6,7,6*,,,7,,,,*,*,7,* 7, 7,,6,,,,,,*,*,,,,, 6,,,,,,*,*,,* 6,,*,6,,,7,,,*,*,,* 7, 6,,,,,,,6 7,7,,,, 6,7,,,,7* 6, 6,*,,6,6,*,,7* 7, 6,*,,7,, 6 6 Industrial Stick 6 ft ft ft ft ft ft ft Undercarriage ft in pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down pt. outriggers down,*,*,,*,*,*,*,*,*,*,*,*,,*,,*,,* 6,,*,,* 6,,*,,7,6,6, 6,,,* 6,,7*, 7,6*,,* 7,,7*, 7,6*,,,,, 6,,,,,* 6,,6*,,*,7 7,*,,* 6,,6*,,*, 7,*, 7,* 7,7,,,,7 6,,,,7 7,*,,*,,*,,, 7,*,6 7,*,6,* 6,6,*,7,7, 7,*,,*, 7, 7,,, 7,,,7,6,,,*,,* 7, 6,6*,,*,,, 7,6*,,*,,*, 6,6* 6,,,,, 7, 6,7,*, 6, 6,,, 7,,,,,,,*,6,* 7, 7,*,,,7,, 7,,,*,,*, 7,*,7,,,, 7,,*,*,,,,, 6,,,,,,*,*,,* 6,,*,6,,,6, 7,,*,*,,* 7, 7,,,,,, 7,,*,* 7,,,,,7 6,6,,,,,*,*,6,7*, 7,6*,,,,,,,*,*,,7* 6, 6,,,,,, 7,7 7,,,,,6 6,,,7,,*,7,*,,6*,7,*,,* 6,7,*,,,, 7 6 7 Height Can be slewed through 6 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities are stated in pounds (lb) on the stick tip without attachment and are valid on firm, level supporting surface with blocked oscillating axle. These capacities can be lifted 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. A C Litronic Machine for Industrial Applications
Industrial Attachment for Recycling with Straight Boom ft m Attachment Envelope Industrial-type straight boom pinned in rear bearing of boom foot bracket with industrial stick and sorting grab Operating Weight 7 6 The operating weight includes basic machine A C litronic` with pt. outriggers, hydr. cab elevation, solid tires plus spacer rings and industrial attachment with industrial-type straight boom. with sorting grab Weight with industrial stick with tipping kinematics, lb - - - - - - - - - -6 7 6 m Lift Capacities ft Industrial Stick ft ft ft ft ft ft ft Undercarriage ft in,*,*,*,* pt. outriggers down,*,*,*,* 6, 6,* 7,,* 6,,* pt. outriggers down 6,* 6,*,*,*,*,*,,,,, 7, pt. outriggers down,*,*,7,7*,*,* 7 6,,,,,6 6,7, 6, pt. outriggers down,*,*,,*,,* 7,,*, 7,* 7,,7,,,6 6,7,6, pt. outriggers down 7,* 7,*,6*,6*,6,*,,* 6,7 7,*,6*,6*,7, 7,,,,, 6,6,,,, pt. outriggers down,6*,6*,*,* 6, 6,6*,,*,,* 6,,7 6, 7,* 6,*,*,, 6,,,,, 6,,,,, pt. outriggers down,*,*,6*,6*, 7,*,7,*,, 6,,6, 7,* 6,6 7,,7,,,, 6,,,7,, pt. outriggers down,,*, 7,7*,,7* 7,7, 6,,*,7 7,* 6 6,*,* 7,7,*,,7,7 7,7,,,,7,, pt. outriggers down,*,*,*,*, 6,7*,,* 7,,* 6, 6,*, 6,* 6 7,,6*,,,6 7,,7,,, pt. outriggers down,6*,6*,,*,7,* 7,,* 6,* 6,* Height Can be slewed through 6 In longitudinal position of undercarriage Max. reach * Limited by hydr. capacity The lift capacities are stated in pounds (lb) on the stick tip without attachment and are valid on firm, level supporting surface with blocked oscillating axle. These capacities can be lifted 6 with the undercarriage in the transverse position. Capacities in the longitudinal position of the undercarriage (+/ ) are specified over the steering axle with the stabilizers raised and over the rigid axle with the stabilizers down. Indicated loads comply with the ISO 67 standard and do not exceed 7 % of tipping or 7 % of hydraulic capacity. A C Litronic Machine for Industrial Applications
Choice of Cab Elevations and Cab Protections D Rigid Cab Elevation Height 7 C B A A 7 6 B C D A rigid cab elevation has a fixed eye level height. For a lower transport height the shell of the cab can be removed. The overall height is then dimension A. C B C B D D E Hydraulic Cab Elevation (Parallelogram) B B 6 C C 7 D 6 D E The parallelogram cab riser allows the operator to choose his field of view between dimensions B and B. For a transport height lower than C the shell of the cab can be removed. The overall height is then E. Cab guard for cab with elevation FOPS Guard Front Guard A C Litronic Machine for Industrial Applications
Variety of Tools Shells for loose material with Shells for Loose Material Clamshell Model B cutting edge (without teeth) Cutting width of shells ft in Capacity yd..6. For loose material, specific weight up to lb/yd,,, Total weight lb,,6, Multiple Tine Grapples open tines semi-closed tines closed tines Grapple model 6 Capacity yd..7..7..7 ( tines) Weight lb,6,,6,,7, Grapple model 6 Capacity yd..7..7..7 ( tines) Weight lb,,7,,,, Crane Hook with Suspension Max. load lb 7, Height with suspension ft in Total weight lb Magnet Devices/Lifting Magnets Generator kw Electromagnets with Suspension Power kw. 6 Diameter of magnet ft in Height with suspension ft in 7 7 Weight lb,6,6 A C Litronic Machine for Industrial Applications
Equipment Undercarriage S O Two circuit travel brake with accumulator Travel motor protection Outrigger cylinder rod guards Travel speed switch New tires Service free parking brake Independent outrigger control Choice of tires Auto check valve on each stabilizer cylinder Proportional power steering with mechanical back up Customized colors Two lockable storage boxes Additional lockable storage box Two-speed power shift transmission Uppercarriage S O Electric fuel tank filler pump Maintenance-free swing brake lock Handrails, Non slip surfaces Main switch for electric circuit Engine hood with lift assistance Pedal controlled positioning swing brake Reverse travel warning system Sound insulation Customized colors Pin lock upper/lower Maintenance-free HD-batteries Extended tool kit Lockable tool box Tool kit Operator s Cab S O Storage tray Displays for engine operating condition Mechanical hour meters, reader outside cab Roof hatch Adjustable roof vent 6-way adjustable seat Air pressure operator seat with heating and head-rest Seat and consoles independently adjustable Extinguisher Removable customized foot mat Dome light Rigid or hydraulic cab Cab heater with defroster Coat hook Air conditioning Cooler Adjustable steering wheel Bullet proof window (fixed installation can not be opened) Radio stereo Radio installation Rain hood over front window opening Beacon Tinted windows Door with sliding window Optical and acoustical warning if outriggers are not fully retracted Auxiliary heating Sun shade Sun blinds Electronic theft protection Wiper blades Cigarette lighter and ashtray Additional flood lights Hydraulics S O Hydraulic tank shut-off valve Extra hydr. control for hydr. swivel Pressure compensation Hook up for pressure checks Pressure storage for controlled lowering of attachments with engine turned off Filter with partial micro filtration ( µm) Electronic pump regulation Step less mode system (ECO) Flow compensation Four mixed modes, can also be adjusted Full flow micro filtration Bio degradable hydraulic oil Tool Control Additional hydraulic circuits Engine S O Turbo charger Unit pump system Cold start aid Sensor controlled engine idling Air filter with pre-cleaner main- and safety element Attachment S O Flood lights on boom Hydr. lines for clam operation in sticks Industrial-type gooseneck sticks with remote hydraulic pin puller Sealed pivots Safety lift hook Liebherr line of clams Liebherr semi-automatic central lubrication system Liebherr fully-automatic central lubrication system Likufix Safety check valves on hoist cylinder Safety check valves on stick cylinder Hose quick connection Hydraulic or manual quick change tool adapter Customized colors Special buckets and other tools Overload warning device Two way valves for bucket/clam use Locking of connections for clam operation Cylinders with shock absorber S = Standard, O = Option Options and/or special attachments, supplied by vendors other than Liebherr, are only to be installed with the knowledge and approval of Liebherr to retain warranty. A C Litronic Machine for Industrial Applications
Liebherr Construction Equipment Co. Chestnut Avenue, Newport News, VA 67, USA (7 7), Fax (7 7) 7 www.liebherr.us, E-Mail: info.lce@liebherr.com Printed in Germany by Typodruck RG-BK LHB/VF 7--. Illustrations and data may differ from standard equipment. Subject to change without notice.