Jameco SKU Number:

Jameco SKU Number: 2105842 60W Single Output with Battery Charger(US Function) SC-60 s e ries SECIFICATION MODEL OUTUT INUT ROTECTION FUNCTION ENVIRONMENT SAFETY & EMC (Note 4) OTHERS NOTE OUTUT NUMBER DC VOLTAGE RATED CURRENT CURRENT RANGE RATED OWER VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETU, RISE TIME HOLD U TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD OVER VOLTAGE BATTERY CUT OFF AC OK BATTERY LOW WORKING TEM. WORKING HUMIDITY STORAGE TEM., HUMIDITY TEM. COEFFICIENT VIBRATION SAFETY STANDARDS HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION ACKING SC-60A 13.8V 2.8A 0 ~ 4.3A 59.34W RILE & NOISE (max.) Note.2 120mVp-p VOLTAGE TOLERANCE Note.3 WITHSTAND VOLTAGE CH1 CH1: 12 ~ 15V 1.0% 0.5% 0.5% Note.5 800ms, 50ms/230VAC 50ms/230VAC 1600ms, 50ms/115VAC at full load 10ms/115VAC at full load 90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz 84% 1.6A/115VAC 1A/230VAC COLD START 30A/115VAC <1mA / 240VAC 105 ~ 150% rated output power 60A/230VAC rotection type : Hiccup mode, recovers automatically after fault condition is removed CH1:14.49 ~ 18.63V CH1:28.98 ~ 37.26V 84% rotection type : Hiccup mode, recovers automatically after fault condition is removed 10.5 0.5V -20 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85, 10 ~ 95% RH 0.03%/ (0~50 ) on CH1 output 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved Compliance to EN61000-3-2,-3 21 1V TTL open collector output, ON : AC OK ; OFF : AC Fail ; Ice : max. 30mA@ 50VDC TTL open collector output, ON : Battery Low ; OFF : Battery OK ; Ice : max. 30mA@ 50VDC Battery low voltage : < 11V Battery low voltage : < 22V Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 589.7K hrs min. MIL-HDBK-217F (25 ) 101.6*50.8*29mm (L*W*H) 0.13Kg; 96pcs/13.5Kg/0.89CUFT CH2 13.8V 1.5A I/-O/:3KVAC I/-FG:1.5KVAC O/-FG:0.5KVAC ISOLATION RESISTANCE I/-O/, I/-FG, O/-FG:100M Ohms / 500VDC / 25 EMI CONDUCTION & RADIATION Compliance to EN55022 (CISR22) Class B / 70% RH SC-60B CH1 27.6V 1.4A 0 ~ 2.15A 59.34W 240mVp-p CH1: 24 ~ 29V 1.0% 0.5% 0.5% CH2 27.6V 0.75A File Name:SC-60-SEC 2009-01-13

Jameco SKU Number: 2105842 60W Single Output with Battery Charger(US Function) SC-60 s e ries Mechanical Specification 101.6 Unit:mm 50.8 44.45 3.175 3 2 1 FS1 CN1 AC FUSE T2.5A/250V 95.25 3.175 HS1 HS2 SVR1 1 2 3 4 5 6 CN2 4-3.3 29 3 max. AC Input Connector (CN1) : JST B3-VH or equivalent in No. Assignment Mating Housing Terminal 1 AC/N JST VHR JST SVH-21T-1.1 2 No in or equivalent or equivalent 3 AC/L Block Diagram DC Output Connector (CN2) : JST B6-VH or equivalent in No. Assignment in No. Assignment Mating Housing 1 Bat. Low 4 Battery + JST VHR 2 AC OK 5 DC Output + or equivalent 3 Battery - 6 DC Output COM ALARM CIRCUIT Terminal JST SVH-21T-1.1 or equivalent AC OK Bat. Low I/ EMI FILTER RECTIFIERS & FILTER OWER SWITCHING RECTIFIERS & FILTER +V -V Bat. + FG O.L.. CONTROL DETECTION CIRCUIT O.V.. Battery Charger & Back Up Control Bat. - Output Derating Output Derating VS Input Voltage Ta=25 100 100 90 80 80 60 70 LOAD (%) 40 20 LOAD (%) 60 50 40-20 0 10 20 30 40 50 60 70 (HORIZONTAL) 90 95 100 115 120 140 160 180 200 220 240 264 AMBIENT TEMERATURE ( ) INUT VOLTAGE (VAC) 60Hz File Name:SC-60-SEC 2009-01-13

Jameco SKU Number: 2105842 60W Single Output with Battery Charger(US Function) SC-60 s e ries Suggested Application 1.Back up connection for AC interruption (1) lease refer to the Fig1.1 for suggested connection. The power supply charge the battery and provide energy to the load in the same time when the AC main is OK. The battery start to supply power to the load when the AC main fails. Bat- Bat+ DC+ DC- - + + - A : 12V B : 24V Battery Load Fig 1.1 Suggested system connection 2.Alarm Signal for AC OK and Battery Low (1) Alarm Signal is sent out through " AC OK " & " Battery Low " pins. (2) An external voltage source is required for this function. The maximum applied voltage is 50V and the maximum sink current is 30mA. (3) Table2.1 explain the alarm function built-in the power supply Function AC OK Battery Low AC OK (Battery low) Description The signal is "Low" when the power supply turns on The signal turns to be "High" when the power supply turns OFF The signal is "Low" when the voltage of battery is under A:11V, B:22V The signal is "High" when the voltage of battery is above A:11V, B:22V Table 2.1 Explanation of Alarm Signal Output of alarm Low (0.3V max. at 30mA) High or open(external applied voltage 30mA max.) Low (0.3V max. at 30mA) High or open(external applied voltage 30mA max.) R V in6 DC output com External voltage and R (The max. Sink is 30mA and 50V) Fig 2.2 Internal circuit of AC OK (Battery Low) File Name:SC-60-SEC 2009-01-13

60W Single Output with Battery Charger(US Function) SC-60 series MODEL:SC-60B OUTUT FUNCTION TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 RILE & NOISE V1: 240 mvp-p (Max ) I/: 230VAC V1: 28 mvp-p (Max ) O/:FULL LOAD 2 OUTUT VOLTAGE ADJUST RANGE CH1: 24V~ 29 V I/: 230 VAC I/: 115 VAC O/:MIN LOAD 23.39 23.38 V~ V 30 30 V/ 230 VAC V/115VAC 3 OUTUT VOLTAGE TOLERANCE V1: 1 %~ -1 % (Max) I/: 115 VAC / 264 VAC O/:FULL/ MIN LOAD V1: 0.12 %~ -0.12 % 4 LINE REGULATION V1: 0.5 %~ -0.5 % (Max) I/: 115VAC ~ 264 VAC O/:FULL LOAD V1: 0.03 %~ -0.03 % 5 LOAD REGULATION V1: 0.5 %~ 0.5 % (Max) I/: 230 VAC O/:FULL /MIN LOAD V1: 0.12 %~ -0.12 % 6 SET U TIME 230VAC: 115VAC: 800 1600 ms (Max) ms (Max) I/: 230 VAC I/: 115 VAC O/:FULL LOAD 230VAC/ 115VAC/ 295 600 ms ms 7 RISE TIME 230VAC: 50 ms (Max) I/: 230 VAC 230VAC/ 15 ms 115VAC: 50 ms (Max) I/: 115 VAC 115VAC/ 17 ms O/:FULL LOAD 8 HOLD U TIME 230VAC: 115VAC: 50 10 ms (TY) ms (TY) I/: 230 VAC I/: 115 VAC O/:FULL LOAD 230VAC/ 115VAC/ 72 15 ms ms 9 OVER/UNDERSHOOT TEST < +5% I/: 230 VAC O/:FULL LOAD 10 DYNAMIC LOAD V1: 2760 mvp-p I/: 230 VAC O/:FULL /Min LOAD 90%DUTY/ 1KHZ TEST: < 5 % 210 mvp-p Model: SC-60B Test Report 1 / 6

60W Single Output with Battery Charger(US Function) SC-60 series INUT FUNCTION TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 INUT VOLTAGE RANGE 90VAC~264 VAC I/:TESTING O/:FULL LOAD I/: LOW-LINE-3V= 87 V HIGH-LINE+15%=300 V O/:FULL/MIN LOAD ON: 30 Sec. OFF: 30 Sec 10MIN ( AC OWER ON/OFF NO DAMAGE ) TEST: OK 49V~264V 2 INUT FREQUENCY RANGE 47HZ ~63 HZ NO DAMAGE OSC I/: 90VAC ~ 264 VAC O/:FULL/MIN LOAD TEST: OK 4 EFFICIENCY 84% (TY) I/: 230 VAC 86 % O/:FULL LOAD 5 INUT CURRENT 230V/ 1 A (TY) I/: 230 VAC I = 0.64 A/ 230 VAC 115V/ 1.6 A (TY) I/: 115 VAC I = 1.1 A/ 115 VAC O/:FULL LOAD 6 INRUSH CURRENT 230V/ 60 A (TY) I/: 230 VAC I = 44 A/ 230 VAC 115V/ 30 A(TY) I/: 115 VAC I = 22 A/ 115 VAC COLD START O/:FULL LOAD 7 LEAKAGE CURRENT < 1 ma / 240 VAC I/: 264 VAC O/:Min LOAD L-FG: 0.035 ma N-FG: 0.01 ma Model: SC-60B Test Report 2 / 6

60W Single Output with Battery Charger(US Function) SC-60 series ROTECTION FUNCTION TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 OVER LOAD ROTECTION 105%~ 150 % I/: 230 VAC I/: 115 VAC O/:TESTING 134%/ 230 VAC 129%/ 115 VAC Hiccup Mode 2 OVER VOLTAGE ROTECTION CH1: 28.98V~ 37.26 V I/: 230 VAC I/: 115 VAC O/:MIN LOAD 31.61 V/ 230 VAC 31.14 V/ 115 VAC Hiccup Model 3 BATTERY CUT OFF 21V + 1V I/: 230 VAC O/:FULL LOAD 20.6 V/230VAC 4 SHORT ROTECTION SHORT EVERY OUTUT 1 HOUR NO DAMAGE I/: 264 VAC O/:FULL LOAD NO DAMAGE Hiccup Mode CONTROL FUNCTION TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 AC OK TTL open collector output, I/: 230 VAC ON : AC OK ; O/:FULL LOAD OK OFF : AC Fail ; Ice : max. 30mA@ 50VDC 2 BATTERY LOW TTL open collector output, ON : Battery Low ; OFF : Battery OK ; Ice : max. 30mA@ 50VDC I/: 230 VAC O/:FULL LOAD 21.4V Battery low voltage < 22V Model: SC-60B Test Report 3 / 6

60W Single Output with Battery Charger(US Function) SC-60 series ENVIRONMENT TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 TEMERATURE RISE TEST MODEL: SC-60A 1. ROOM AMBIENT BURN-IN: 31.5 HRS I/: 230VAC O/: FULL LOAD Ta= 23.4 2. HIGH AMBIENT BURN-IN: 1.5 HRS I/: 230VAC O/: FULL LOAD Ta= 54.5 NO osition /N ROOM AMBIENT HIGH AMBIENT Ta= 23.4 Ta= 54.5 1 LF1 LF853 58.3 83.0 2 BD1 4A/800V 梳型 SILICON 56.1 82.2 3 D1 EG20J 2A/600V 76.4 102.5 4 C5 100u/400V 105 KMG 54.9 81.7 5 T1 TF1891 80.0 106.1 6 Q1 2SK4110 6A/600V 82.7 113.0 7 C36 100u/35V L7Kh 8*11.5 YXF 64.0 89.5 8 U1 NC1200D 66.4 92.4 9 D100 20CTQ150 20A/150V 80.2 105.5 10 C105 560u/35V UL7Kh 10*25 KY 66.0 93.4 11 C107 220u/35V UL7Kh 8*15 KY 51.3 77.9 12 C108 470u/25V UL7Kh KY 73.9 98.7 13 L100 1.2Φ 1.1uH 67.6 93.9 2 OVER LOAD BURN-IN TEST NO DAMAGE 1 HOUR ( MIN ) 3 LOW TEMERATURE TURN ON AFTER 2 HOUR TURN ON TEST I/: 230 VAC O/: 114 % LOAD Ta:25.8 I/: 230 VAC O/: 100 % LOAD Ta= -25 TEST:OK TEST:OK 4 HIGH HUMIDITY HIGH TEMERATURE HIGH VOLTAGE TURN ON TEST 5 TEMERATURE COEFFICIENT AFTER 12 HOURS IN CHAMBER ON CONTROL 50 6 VIBRATION TEST 1 Carton & 1 Set (1) Waveform: Sine Wave I/: 272 VAC O/:FULL LOAD Ta= 50 NO DAMAGE HUMIDITY= 95 %R.H + 0.03 %(0~50 ) I/: 230 VAC O/:FULL LOAD (2) Frequency:10~500Hz (3) Sweep Time:10min/sweep cycle (4) Acceleration:2G (5) Test Time:1 hour in each axis (X.Y.Z) (6) TEST:OK + 0.005 %(0~50 ) TEST:OK Model: SC-60B Test Report 4 / 6

60W Single Output with Battery Charger(US Function) SC-60 series SAFETY TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 WITHSTAND VOLTAGE I/-O/: 3 KVAC/min I/-FG: 1.5 KVAC/min I/-O/: 3.6 KVAC/min I/-FG: 1.8 KVAC/min I/-O/: I/-FG: 1.01 0.489 ma ma O/-FG: 0.5 KVAC/min O/-FG: 0.6 KVAC/min O/-FG: NO DAMAGE 0.085 ma 2 ISOLATION RESISTANCE I/-O/:500VDC>100MΩ I/-FG: 500VDC>100MΩ O/-FG:500VDC>100MΩ I/-O/: 500 VDC I/-FG: 500 VDC O/-FG: 500 VDC Ta:25 /70%RH I/-O/: 30 GΩ I/-FG: 30 GΩ O/-FG: 30 GΩ NO DAMAGE 3 AROVAL TUV: Certificate NO : UL: File NO : N/A E.M.C TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 HARMONIC EN61000-3-2 CLASS A 2 CONDUCTION EN55022 CLASS B 3 RADIATION EN55022,EN55011 CLASS B 4 E.S.D EN61000-4-2 LIGHT INDUSTRY AIR:8KV / Contact:4KV I/: 220/230 /240VAC/50HZ O/:100/75/50/25%LOAD I/:230 VAC(50HZ)/115V(60HZ) O/:FULL/50% LOAD I/:230 VAC(50HZ) /115V(60HZ) O/:FULL LOAD I/: 230 VAC/50HZ O/:FULL LOAD ASS ASS Test by certified Lab ASS Test by certified Lab CRITERIA A 5 E.F.T EN61000-4-4 LIGHT INDUSTRY INUT: 1KV I/: 230 VAC/50HZ O/:FULL LOAD CRITERIA A 6 SURGE IEC61000-4-5 LIGHT INDUSTRY L-N :1KV L,N-E:2KV I/: 230 VAC/50HZ O/:FULL LOAD CRITERIA A 7 Test by certified Lab & Test Report repare M.T.B.F & LIFE CYCLE CALCULATION NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 CAACITOR LIFE CYCLE SC-60A: SUOSE C105 IS THE MOST CRITICAL COMONENT I/: 230VAC O/:FULL LOAD Ta= 25 LIFE TIME= 96887 HRS I/: 230VAC O/:FULL LOAD Ta= 50 LIFE TIME= 22119 HRS 2 MTBF MIL-HDBK-217F NOTICES2 ARTS COUNT TOTAL FAILURE RATE: 589.7 KHRS Model: SC-60B Test Report 5 / 6

60W Single Output with Battery Charger(US Function) SC-60 series COMONENT STRESS TEST NO TEST ITEM SECIFICATION TEST CONDITION RESULT VERDICT 1 ower Transistor ( D to S) or (C to E) eak Voltage 2 Diode eak Voltage D100Rated Q 1 Rated 2SK4110 6A/600V SF10LC40 10A/400V 3 Clamp Diode eak Voltage D1 Rated EG20J 2A/600V I/:High-Line +3V = 267 V O/:(1)Full Load Turn on (2) Output Short I/:High-Line +3V = 267 V O/:(1)Full Load Turn on (2)Output Short I/:High-Line +3V = 267 V O/:(1) Dynamic Load 90%Duty/ 1KHz (1) 558 V (2) 560 V (1) 316 V (2) 272 V (1) 492 V 4 Input Capacitor Voltage C 5 Rated 100u/400V 105 KMG I/:High-Line +3V = 267 V O/:(1)Full Load Turn on /Off (2) Min load Turn on /Off (3)Full Load /Min load Change (1) 369.4 V (2) 377 V (3) 376.5 V 5 Control IC Voltage Test U1Rated NC1200 16V I/:High-Line +3V = 267 V O/:(1)Full Load Turn on /Off (2) Min load Turn on /Off (3)Full Load /Min load Change (1) 13.79 V (2) 13.12 V (3) 13.12 V DATE SAMLE TEST RESULT TESTER AROVAL 2008/11/3 RD SAMLE ASS SANFORD SU VINCENT TSENG 2009/2/20 2009/3/11 RODUCT SAMLE W0811C37 RODUCT SAMLE W0901D38 ASS SANFORD SU VINCENT TSENG ASS SANFORD SU VINCENT TSENG 2003/12/12 A50-F023 Model: SC-60B Test Report 6 / 6