TRANSNET 100% NZ OWNED HV JUICE October November 2013 The NEW ERA in Power Distribution ECO PILLAR LOW PROFILE, UNOBTRUSIVE DESIGN Raychem GelPort Now up to 300mm2
CRSM-CT-M Single Core Branch Joint up to 300mm2 NEW We are pleased to announce the release of the new generation Raychem low voltage single core XLPE/ PVC branch joints; The CRSM-CT-M. This re-designed range now offers solutions for cable sizes 25-300mm² (main) and 16-35mm2 (service). This will not phase out the existing CRSM-CT non mechanical kits but simply give a mechanical option. The new concept is based on the tried and proven CRSM-CT kits which use heat shrink technology to branch a single core service cable from a single core main cable. The service cable is then run into a pillar or TUD to feed a house or other residence, we have simply included a UBR mechanical range taking connector and a BOCL clip with additional mastic for sealing the joint. The UBR connector with single or double service tap ensures a reliable branch connection for a single core service cable from a single core main cable. A branch off clip is provided to assist with the environmental seal between the cables and a wraparound sleeve with thermo-sensitive paint is provided for environmental and mechanical protection of the entire joint. Product FEATURES BENEFITS CNSM Wraparound Thermo-sensitive paint provides visual guide to assist with installation. Technology Superior mechanical protection. Bi-Metal applications. Inclusion of USB Fits solid, stranded, round and sector cable types. Mechanical Connector Range taking ability allows better product offering and reduced inventory. Reduced installation time. Branch Off Clip (BOCL) Provides greater reliability when sealing between two cables. This product was designed in order to eliminate the risk of using an inappropriate connector and to remove the guess work by offering everything required to make the connection in a complete package. Watch out for the product installation video which will be made available in the coming months. It will be accessed via a QR code on the label. Product # Main Cable Service Cable Single Service Double Service (mm2) (mm2) CRSM-CT1-M CRSM-CT1-MD 25-95 16-35 CRSM-CT2-M CRSM-CT2-MD 50-185 16-35 CRSM-CT3-M CRSM-CT3-MD 185-300 16-35
GELPORT Now Up To 300mm2 RAYCHEM GELPORT BIGGER AND BETTER! Strip the cable, push it into the gel-filled cable port tighten the bolt and close the cap it really is that simple. GelPorts use Raychem PowerGel to seal cable entry ports. A sealing gel specifically developed for the electrical power industry, it is hydrophobic and provides an excellent moisture seal over a wide operating temperature range (-40 0 C to 95 0 C). Up until recently the GelPort has been able to accommodate cables from 6-150mm2 and 16-240mm2, it can now accommodate cables up to 300mm2. FEATURES 2 x Ports accommodate 185-300mm2, 1 x Port accommodates 16-185mm2 Corrosion resistant No loose parts due to one piece housing Gel-filled cable entry ports provide a reliable cable seal Clear view back for fast, positive visual indication of wire position in connector Voltage range: 600V Tested up to 700A GEL SEALED SCREW PORT CAP CLEAR VIEW BACK MAKES INSTALLATION EVEN EASIER PROVEN TOUGH HINGE DESIGN NEW! PROVEN ROBUST LATCH DESIGN OUTER PORT STRIP GUIDE OUTER PORT CENTRE PORT SHIPPING CAP PRODUCT # GPRT-300-3P-OR
NEW EP6 ECOPILLAR The Safe One INTRODUCING THE EP6 ECOPILLAR The NEW ERA in POWER DISTRIBUTION GOOD VENTILATION FLAME RETARDANT PANELS COVERED NEUTRAL BAR USES FULLY INSULATED, SUBMERSIBLE GELPORT CONNECTORS FOR 2-3 LOOPING MAIN CABLES 16-240mm2 OR 185-300mm2 A RANGE OF LOCKING SYSTEMS AVAILABLE GROUND LEVEL INDICATION EP6 ECOPILLAR > FITS 10 X 63A FUSES OR DIN SWITCHGEAR > IF EXTRA SPACE IS REQUIRED, STANDARD (10 FUSES) AND TALL (20FUSES) UNITS HAVE THE SAME FOOTPRINT LOW PROFILE, UNOBTRUSIVE DESIGN Contact customer service or your local TransNet rep for more information on how this unit could work for your network. ECO PILLAR ECO > IMPROVE AESTHETICS OF YOUR STREET > SAFELY AND QUICKLY DISCONNECT, TEST AND RECONNECT MAIN CABLE > KEEP PUBLIC SAFER WITH CAPTURED BOLTS AND SPECIAL LOCKING SYSTEM > PROTECT WORKERS WITH COVERED NEUTRAL BAR > FULLY RECYCLABLE
END OF LINE DEALS Don t Miss Out!!! 764 1000V DEPTH GAUGE SAW For cable with sheet steel/aluminium sheathing Adjustable stopper for adjustable cutting depth Replaceable 24tpi saw-blade Notched saw-blade for soft materials available separately Fully insulated to EN60900-1000V maximum working 764 $90.00 12O range $110.00 12KV COOPER BUSSMANN OIL FUSE LINKS BS 2692-1 medium voltage fuses for use on the primary circuit of three-phase 50Hz transformers in oil field switchgear. Fitted with powerful pyrotechnic striker pin Current Limiting 12kV Fuse Links for use in Oil Switchgear Rated Voltage: 12kV Rated Breaking Capacity: 40kA Standard specifications: IEC 282-1/BS 2692-1/ESI 12-8 Contact customer service for sizes available KME3 PARROT BEAK CABLE CUTTER UP TO 500MM2 Large cable cutter for annealed copper and aluminium conductors up to 500 mm2. Parrot Beak blades do not distort cable which inturn eases lugging. Technical data Length 805 mm Weight 2.8 kg KME3 $150.00
SUPER SPECIALS Utility Essentials VTT-4 Telescopic Hot Stick The VTT-4 triangular shape RITZGLAS telescopic hot stick boasts a universal end fitting, able to accept a wide range of attachments so the stick can be used in a multitude of different applications. Able to extend from 1.52m to 5.0m, this hot stick is an extremely versatile tool. Assembled with epoxy-resin reinforced fibreglass poles, the VTT-4 complies with ASTM F-1826/99 and IEC 62193/03 Features Fully insulated top section Triangular shape locks into place quickly Supplied with rubber ring and seal to secure in place during transportation Comes with M4455-9 attachment TNHSFP House Service Fuse Puller Made of tough, UV stabilised plastic this tool offers no risk if contacting live wires. With the pigtail mould, it s fast and easy to use, simply line it up with the hole in the fuse plug, screw it in and pull the fuse plug out. The new design allows for use with or without a hotstick depending on your current work practises. VTT-4 $300.00 TNHSFP $5.95 VTT-7 Telescopic Hot Stick The VTT-7 triangular shape RITZGLAS telescopic hot stick boasts a universal end fitting, able to accept a wide range of attachments so the stick can be used in a multitude of different applications. Able to extend from 1.68m to 9.14m, this hot stick is an extremely versatile tool. Assembled with epoxy-resin reinforced fibreglass poles, the VTT-7 complies with ASTM F-1826/99 and IEC 62193/03 Features Fully insulated top section Triangular shape locks into place quickly Supplied with rubber ring and seal to secure in place during transportation Comes with M4455-9 attachment MI3202 5kV Insulation Tester Five test voltages up to 5kV and 1TΩ resistance measuring range cover most applications. User friendly design is assured with a large LCD dispay. A rugged carrying case provides mechanical robustness needed for use in harsh environments. FEATURES Fast charging CAT IV, 600V Large LCD display with backlight 5 preset test voltages (250V, 500V, 1000V, 2500V & 5000V) High quality accessories included in standard set VTT-7 $500.00 STANDARDS Adheres to IEC & EN standards MI3202 $2500.00
PORTABLE LED LIGHTS Perfect for Fault Situations Extended Height = 5m PORTABLE LIGHT STANDS 400W Using a bicycle foot pump, this temporary light stand extends to 5 meters. It automatically locks in place at each extension stage with locking pins. The 400 watt LED light has a comparable lighting level to a 1000W metal halide. The stand is very stable, and for added stability in poor weather conditions, it is supplied with anchor pegs and strops. This unit can be powered by mains, generator or your vehicles battery (simply connect the inverter mounted inside of the carry). LEDILS-5000 KIT INCLUDES: 400W LED light fitting Air extendable light stand Storage bag for stand, Tough plastic carry case for kit Bicycle foot pump Quick mount light bracket Carry/Storage bag Battery leads 400W inverter TECHNICAL SPECIFICATIONS LED Sources Input Voltage IP Rating Dimensions Stand Packed in Carry Case Weight Stand Packed in Carry Case 400W 230V AC IP65 1.6m up to 5m when extended LxWxH 80x52x32cm 17.85kg 32.85kg Retracted Height = 1.6m ECO LIGHT BATTERY POWERED LED FLOODLIGHT 10W & 20W The perfect portable work light. Available in 10W and 20W, this rechargable battery powered LED Floodlight on a sturdy stand is a must have for all tradesmen. FEATURES 120 0 Light beam 5000K Colour Temperature/Ra75 4hr Battery run time Rechargable Li-Ion battery IP65 rated 85 ~ 265V AC NZ power plug and 12 24V DC car plug chargers included LEDFL-10WBATT $99.00+GST LEDFL-20WBATT $155.00+GST
TNERIB Main Earth Inspection Box STRONGER, SAFER, BETTER! Designed by NZ contractors for NZ contractors! Improve the looks and integrity of your main earth connection with the TransNet Main Earth Inspection Box. Strengthened Lid Heavy Duty Hinged Lid Clear Description Embossed on Lid Lid Latches Closed UV Stabilised Material Dimensions 120x120x200mm TransNet New Zealand Ltd Auckland Wellington TransNet Equipment Pty Ltd Perth TransNet Tonga Tonga 20 Neilpark Drive East Tamaki Auckland NEW ZEALAND Fax 0800 442 183 PO Box 39 383 Howick, Auckland 18 Sydney Street Petone Wellington NEW ZEALAND Ph 04 576 2530 Fax 04 576 0040 PO Box 39 383 Howick, Auckland Unit 20, 8 Hurley Street Canning Vale WA 6155 Perth AUSTRALIA Ph +61 8 9256 3417 Fax +61 8 9256 3917 PO Box 1439 Canning Vale DC WA 6970 Small Industries Ma ufanga Tonga Ph +67 627 939 Fax +67 627 976 PO Box 2932 Nukualofa sales@transnetequipment.com transnet@kalianet.to NEW ZEALAND AUSTRALIA TONGA