49 ELECTRONIC LOCKS AND BARS BLOCK POWERED ELECTRIC LOCKS
49 49.M01/M21 Powered electronic locks Characteristics Lock for double cylinders Variation in centre distance:.../28 -.../37 BATTERY or MAINS operated lock with mainframe inside the lock. Three-points Cylinder and handle backset 63 mm Round bolts Ø mm 18 with 29 mm travel Bar travel 20 mm Including wiring for internal/external escutcheons. CAN MANAGE ALL OF PROGRAMMING FUNCTION: - TIME SLOT - COURTESY TIME - TIME SLOT BACK STOP - TAG IN TIME SLOT - ACCESS CONTROL - 100 KEYBOARD CODES - OVER 250 MOTTURA TRANSPONDER TAG MAGNETIC DOOR STATUS SENSOR The item can be reversed. On request locks may be supplied with: burglar-proof device (cylinder extraction) T Y. Pair with Defender TOP SYSTEM, LEVEL, BASIC, DF.. (Order separately; see section 94) Product tested according to EN 14846 RIM LOCK 49.M01W8/7..49.M21W8/7.. NON-RESTRICTED KEY DUPLICATION, CERTIFIED Three-points for double cylinders Upper lock with Ø 20 mm latchbolt activated by cylinder and q8 handle square. Reversible latchbolt. Lower lock with upper lock blocking function. Disables the use of electronics. Cylinders, reinforcements and other accessories are NOT included. Dependent locks. Activate A first, then proceed with B. MORTISE-TYPE 49.M03W8/7..49.M23W8/7.. PROTECTED KEY DUPLICATION Three-points for double cylinder Upper lock with Ø 20 mm latchbolt activated by cylinder and q8 handle square. Reversible latchbolt. Lower lock with upper lock blocking function. Disables the use of electronics. Cylinders, reinforcements and other accessories are NOT included. Dependent locks. Activate A first, then proceed with B. 214
Powered electronic locks 49 SEMI-AUTOMATIC 49.A20 Characteristics Lock for double cylinder Variation in centre distance:.../28 -.../37 BATTERY operated lock with mainframe inside the lock. Three-points Cylinder and handle backset 63 mm Round bolts Ø mm 18 with 29 mm travel Bar travel 20 mm The Kit includes : 1- Mortise-type/rim lock 2- Battery drawer holder 3- Magnet with increased intensity 4- Internal escutcheon wiring 5- Internal escutcheon with opening push button The item can be reversed. On request locks may be supplied with: mechanical or electronic burglar-proof device (cylinder extraction) T Y. Pair with Defender TOP SYSTEM, LEVEL, BASIC, DF.. (Order separately; see section 94) Product tested according to EN 14846 POWERED ELECTRIC LOCKS RIM LOCK 49.A00W8/7.. 49.A20W8/7.. (B0A) COMPLETE BRONZE ESCUTCHEON KIT (C0A) COMPLETE CHROME ESCUTCHEON KIT (T0A) COMPLETE BRASS ESCUTCHEON KIT (V0A) COMPLETE PVD GOLD ESCUTCHEON KIT (A0A) COMPLETE ANODISED SILVER ESCUTCHEON KIT (S0A) COMPLETE SATIN CHROME ESCUTCHEON KIT Three-points for double cylinder Upper lock with Ø 20 mm latchbolt activated by cylinder and q8 handle square. Reversible latchbolt. Lower lock with upper lock blocking function. Disables the use of electronics. Cylinders, reinforcements and other accessories are NOT included. Dependent locks. Activate A first, then proceed with B. MORTISE-TYPE Locks can be supplied with mechanic or electronic burglary-resistant system (extraction of the cylinder) T Y. The electronic sensor (Mottura patent) avoids false maneuvers in absence of the cylinder. 215
\ 49 94.348.. Nickel-plated Striker plate for locks with magnetic door status sensor. Variation in centre distance: 28/37 Specify in the order Dimensions 356x35x3 mm 94.349.. Nickel-plated Striker plate for locks with door status sensor for contact. Variation in centre distance: 28/37 Specify in the order Dimensions 356x35x3 mm 95.423.. Anod. silver Anod. bronze Brass Chrome Satin Chrome PVD Gold Internal/external escutcheon 70 x 95 x 15 mm for Europrofile cylinder. Central body in black or gray finish. Add G for gray insignia to the code. 95.424.. Anod. silver Anod. bronze Brass Chrome Satin Chrome PVD Gold External escutcheon 70 x 95 x 15 mm with Ø 50 mm hole for Defender. Central body in black or gray finish. Add G for gray insignia to the code. Spares and accessories 95.601 Rectangular escutcheon 65 x 90 x 9 mm Full plastic support for cylinder with knob. 95.603 Rectangular escutcheon 65 x 90 x 9 mm Full plastic support with Ø 50 mm hole for Defender 95.604 Rectangular escutcheon 65 x 90 x 9 mm Full plastic support with Ø 45 mm hole for Defender 99.144 Steel grommet enamelled black Box dimensions 258x22 mm Depth 22 mm External dimensions 292x37 mm 99.648 Magnet with increased intensity for locks sensor. 95.600 Rectangular escutcheon 65 x 90 x 9 mm Full plastic support for euro profile cylinder 99.683 Mains adaptor (Transformer + Charger) Input 230 V AC. Output 12V DC. - 24VA max Dimensions 142x110x62 mm 216
Spares and accessories 99.684 Remote control suitable for home automation systems. Dimensions 142x110x62 mm 49 99.689.. Internal escutcheon (52 x 70 mm) with pushbutton. Connection via dry contact. 99.685.. Internal escutcheon (70 x 95 x 15 mm) with pad. Black or grey central body finish. Add G to the code for grey escutcheons 99.686.. 99.691 Transponder CARD with PROTECTED DUPLICATION Only to be used with art. 99686/687/729/730/736 99.692 Transponder KEY with PROTECTED DUPLICATION Only to be used with art. 99686/687/729/730/736 POWERED ELECTRIC LOCKS External escutcheon (70 x 95 x 15 mm) with traditional backlit pad and transponder reader. Black or grey central body finish. Add G to the code for grey escutcheons. 99.687.. 99.694 Reserved to Mottura Club DUPLICATED transponder CARD External escutcheon (70 x 95 x 15 mm) with transponder reader. Black or grey central body finish. Add G to the code for grey escutcheons. 99.695 Reserved to Mottura Club DUPLICATED transponder KEY 99.688.. Internal escutcheon (70 x 95 x 15 mm) with colour display. Black or grey central body finish. Add G to the code for grey escutcheons. 99.697 lock - adaptor. Cable length approx. 4000 mm In combination with art. 99.683 Product tested according to EN 14846 217
49 99.698 lock - internal escutcheon Cable length about 1000 mm Spares and accessories 99.705 Transponder CARD with NON-RESTRICTED KEY DUPLICATION Only to be used with art. 99686/729/730/736 99.699 lock - external escutcheon Cable length about 1000 mm 99.706 Transponder KEY with NON-RESTRICTED KEY DUPLICATION Only to be used with art. 99686/729/730/736 99.701 lock - external device via dry contact. Cable length about 4000 mm 99.711 Battery charger for XMode for 6 rechargeable batteries (NiMH type D 2200 mah - NOT included). Dimensions 54x110x33 mm In combination with art. 99.712 99.702 lock - remote control. Cable length about 4000 mm In combination with art. 99.684 99.712 lock - battery charger. Cable length about 1000 mm 99.703 Wired 9 V tubular battery holder (6 batteries D type - NOT included). Cable length approx. 1800 mm Dimensions 96x46x208 mm 99.713 Electric striker, used with contact. It determines the door status. black resin finish - size 30x68x4 mm. Mains or battery. 99.704 Wired 9 V battery drawer holder (6 batteries D type - NOT included). Cable length approx. 1800 mm Dimensions 156x42x208 mm 99.726 Connection cable for connect XBLUE with the battery holder. Cable length approx. 3000 mm Used battery holder art. 99703/704 218
Spares and accessories 49 99.729.. External escutcheon (70 x 95 x 5 mm) with fingerprint and transponder reader. Black central body finish. 99.739.. Rectangular internal escutcheon 65 x 90 x 9 mm with push-button. Connection via dry contact. 99.730.. Rectangular external escutcheon 65 x 90 x 9 mm with fingerprint and transponder reader. 99.734 Bluetooth device - XBLUE Suitable for all electric locks, motorized and electric strikes. Connection via dry contact. 99.741.. Rectangular internal escutcheon 65 x 90 x 9 mm with capacitive keypad. 99.742.. Rectangular internal escutcheon 65 x 90 x 9 mm with colour display. POWERED ELECTRIC LOCKS 99.736.. Rectangular external escutcheon 65 x 90 x 9 mm with traditional backlit pad and transponder reader. Product tested according to EN 61000-6-1 : 2007 EN 61000-6-3 : 2007/A1 : 2011 Product tested according to international standards for electromagnetic compatibility. Product tested according to EN 14846 Use DEFENDER (Order separately: see section 94) TOP SYSTEM LEVEL BASIC DF... WE RECOMMEND USING CHAMPIONS SECURITY CYLINDERS 219
49 49.120 Electronic bar block ARMOURED VERSION Characteristics ARMOURED DOORS VERSION BATTERY operated lock Additional locking that completes any armoured door lock, even if already installed, with bar travel between 17 and 23 mm Vertical locking Fixing with front bushes and/or caged nuts Fixing plate (OPTIONAL art. 94399/400) to ease fixing and adjustment Internal locking/unlocking knob External locking/unlocking keypad with electronic code All articles are supplied either left or right-hand (specify in the order) Product tested according to EN14846 BARS NOT INCLUDED We recommend art. 93316/317/318 49.120D/S.. Escutcheons finish Bronze (BR) Chrome (CR) Brass (OT) PVD gold (PV) Anod.Silver (AA) Satin chrome (CS) ARMOURED DOOR VERSION Supplied with: ZINC-PLATED BAR BLOCK External KEYPAD escutcheon art. 99716 Internal escutcheon art. 95321. Connection cables art. 99718/721 Wired battery holder art. 99720 9 volt 6LR61 battery Knob with adjustable shaft Bar hooking pin ASSEMBLY EXAMPLES CONNECTION WITH BAR 93.317 CONNECTION WITHOUT BAR CONNECTION WITH PLATE 94.399 220
Electronic bar block 49 RIM LOCK VERSION 49.130 Characteristics RIM LOCK VERSION BATTERY operated lock Additional locking that completes any security door rim lock, even if already installed, with bar travel between 17 and 23 mm Vertical locking Fixing with screws provided Internal locking/unlocking knob External locking/unlocking keypad with electronic code All articles are supplied either left or right-hand (specify in the order) Product tested according to EN14846 BARS NOT INCLUDED We recommend art. 93316/317/318 POWERED ELECTRIC LOCKS 49.130D/S.. Escutcheon finish Bronze (BR) Chrome (CR) Brass (OT) PVD gold (PV) Anod.Silver (AA) Satin chrome (CS) RIM LOCK VERSION Supplied with: ENAMELLED BAR LOCK finish External KEYPAD escutcheon art. 99716 Connection cable art. 99717 9 volt 6LR61 battery Bar hooking pin Fixing screws and nuts 93.316 Enamelled Zinc-plated Bar pair Ø 18 mm adjustable 1 from 17.5 cm to 24.5 cm 1 from 51 cm to 81.5 cm connection for Astablock - Xcode 93.317 Enamelled Zinc-plated Bar Ø 18 mm adjustable from 17.5 to 24.5 cm for connection between Astablock - XCode and main lock 93.318 Enamelled Zinc-plated Bar Ø 18 mm adjustable from 51 cm to 81.5 cm 221
49 94.399D/S Connecting plate for fitting art. 49.120 (XCode) on standard 52.571 locks etc. Dimensions 134x204 mm The item is supplied left or right-hand (specify in the order) Spare parts and accessories 99.513.. Contoured knob for art. 49.120 - XCode. 94.400D/S Connecting plate for fitting art. 49.120 (XCode) on locks with upper latchbolt 52.505 etc. including bar shift plate Dimensions 134x195 mm The item is supplied left or right-hand (specify in the order) 94.401 Black face plate for XCode battery holder art. 49.120 Dimensions 57x33x1 mm 99.716.. External escutcheon with traditional pad - XCODE. Central body in black finish. (70 x 95 mm) 95.321.. Internal escutcheon 52 x 70 mm with Ø 9.5 mm hole, with plastic support Package of 10 99.717 External escutcheon connection cable - XCODE art. 49.130 Cable length 110 mm 99.251 Bar shift plate/extension to connect Astablock, XCode to locks with 40 mm bar travel Package of 10 99.718 External escutcheon connection cable - XCODE art. 49.120 Cable length 450 mm 99.253 Bar shift plate/extension to connect Astablock, XCode to locks series 50.555-85.555 Package of 10 99.720 Wired battery holder for XCODE art. 49.120 Batteries NOT included Cable length approx. 1.500 mm Do not use the previous version of battery holders (99604/677) as this may irreparably damage the XCODE system. 222