VALVES & CONTROLS ANDERSON GREENWOOD INSTRUMENTATION PRODUCTS Stabilized Connector (Futbol) System, The next generation of manifold systems Product overview The Large Bore IntelliMount direct mount manifold is the next generation of the ACCU-Mount System for natural gas, liquid or steam measurement applications. Designed for close-coupling DP or multi-instruments (, pressure, electronic flowmeter, etc.) to senior and junior orifice changers and/or orifice-flange unions. The Large Bore IntelliMount is available in renewable metal or soft seat configurations and features either GRAFOIL or Teflon stem packings. The Large Bore IntelliMount s superior design reduces the number of leakpoints and overall installation weight in relation to the former ACCU-Mount modular manifold system. Furthermore, the Large Bore IntelliMount is factory assembled and tested, decreasing required costly field-installation time. The Large Bore IntelliMount used with Coplanar transmitters features unique patented integral differential pressure/ pressure adapter plates. This feature eliminates the otherwise required Coplanar adapter flange, removing a potential leakpoint and unnecessary weight. Features and benefits Enhanced transmitter performance - close coupled straight through 3 /8 " [10 mm] bore to transmitter, reducing gauge line error. Provides required spacing for installation via Sr. Orifice Changers without the otherwise required spacer flanges or manifolds. Optional rating to FIRESAFE API 607. Coplanar flange (Rosemount 305) elimination system available. Two-piece modular system affords permanent protection of Rosemount 305 diaphragms during maintenance procedures. No additional brackets or pipe support required. Maximum two-piece system, regardless of the number of required instruments. The DP and Gauge Pressure adapter plate integral to the manifold system eliminates the otherwise additional required flange connectors, reducing leakpoints, installation time, required components and weight. Elimination of impulse lines - direct mount system. Post installation instrument retrofit capability. Mounts all manufacturers field instruments i.e., Rosemount, Yokogawa, Smar, Taylor, Bailey, Moore, Honeywell and Foxboro. Elimination of conventional root block valve block system. Modular design allows for system hydrotest, and certification while affording instrument protection/ controlled storage until commissioning. Total installation, including transmitter, ships in one package to the field. AGIMC-0347-US-1303 Copyright 2013 Pentair WWW.PENTAIR.COM/VALVES
Leak Point and Weight Comparison Leak points comparison Reduction of leak points by 50% Weight reduction of 60% Installation space requirements reduced by 40% Easier installation Large bore intellimount: AF/5GDB Dual Installation of Differential and Gauge Pressure Coplanar Transmitters Materials Technical data Standard Material Traceability Standard material traceability to EN10204-3.1, 50049-3.1, instrument and isolation/block modules bodies only. Valve Packings and Flange Seals Teflon (Standard) Maximum pressure: 6,000 psig [414 barg] Maximum temperature: 500 F [260 C] GRAFOIL (Optional) Maximum pressure: 6,000 psig [414 barg] Maximum temperature: 1000 F [538 C] Seat Temperatures Delrin 200 F [93 C] maximum Teflon 500 F [260 C] maximum PEEK 400 F [204 C] maximum Standard SS Valve Body 316 SS Bonnet 316 SS Stem 316 SS Non-Wetted Parts Austenitic SS CS Valve Body A105 CS Bonnet 316 SS Stem 316 SS Non-Wetted Parts Austenitic SS Special For severe service, manifolds are available in the following exotic materials: Monel Alloy 400 Duplex S31803 Hastelloy C276 Bolting All IntelliMount assemblies are supplied with high tensile steel bolts as standard. Optional stainless steel bolts (B8M Class 2) are available; please specify when ordering. = Potential Leak Points Conventional direct mount: = Potential Leak Points Notes: 1. Coplanar is a trademark of Rosemount, Inc. 2. Delrin and Teflon are registered trademarks of E.I. dupont de Nemours and Company. 3. GRAFOIL is a registered trademark of Graftech International Inc. 4. Hastelloy is a registered trademark of Haynes International. 5. Monel is a registered trademark of Special Metals Corporation. 6. Viton is a registered trademark of DuPont Performance Elastomers. page 2 AGIMC-0347-US-1303 Copyright 2013 Pentair
Dimensions, inches [mm] Horizontal Shown AF/3B Style Single block for use with biplanar transmitters. 8.1 [206] 10.9 [277] AF/5GDB Style Single block for dual mounted biplanar transmitters. G/P 10.5 [267] 14.0 [356] AFD/5GC Style Double block for Coplanar transmitters. 9.3 [336] AFS/5GC Style Single block for Coplanar transmitter. 12.2 [310] 11.2 [284] 9.3 [236] AFD/5GDB Style Double block for dual mounted biplanar transmitters. G/P 12.2 [310] 8.9 [226] 14.0 [356] 10.9 [277] Standard Configuration Block Configuration Copyright 2013 Pentair AGIMC-0347-US-1303 page 3
Bonnet Technology Valve technical specifications The IntelliMount features high performance valves for reliable bubble-tight performance. Isolation is achieved with the H series plug valve or the optional Fire-Safe P (use FS designation for Fire-Safe service) non-rotating stem bonnet assembly. ing and equalizing are achieved with the H7/H5 needle/globe valve. Features and benefits Body to bonnet pressure seals below threads preventing process from corroding bonnet retention threads which are loaded in compression for additional strength. Back seat design provides secondary stem seating and prevents stem blowout. Adjustable gland follower allows easy access to adjust the packing gland. Stem threads are located above the stem packing and are completely isolated from the process. Stem packing with GRAFOIL or Teflon for bubble-tight sealing. Optional Fire-Safe block valves to AP1 607. H5 bonnet for venting and equalize service Needle valve 0.14" [3.5 mm] bore Rotating stem and plug Soft or metal seats Soft seat - Delrin, Teflon, PEEK Hard seat - 316/316L SS PTFE Stem Packing H7 bonnet for venting and equalize service Needle/globe valve 0.2" [5.0 mm] bore Free swivel ball end stem -71 F to 1000 F [-57 C to 538 C] Weather Resistant Plastic Cap (PTFE Packed only) Stem Packing Below the Threads Bonnet Lock Pin Metal Seat for High Temperature Applications Bonnet Lock Pin Bonnet-to-Body Metal Seal H bonnet for isolation service Rising plug valve 3 /8" [10 mm] bore Rotating stem and plug Soft or metal seats Soft seat - Delrin, Teflon, PEEK Hard seat - 316/316L SS P bonnet for Fire-Safe service API 607 Fire-Safe Rising (non-rotating stem) plug valve 3 /8" [10 mm] bore Hard seat - 316/316L SS Weather Resistant Metal Cap Weather Resistant Metal Cap Non-Rotating Stem Bonnet Lock Pin Packing Stem Packing Below the Threads Rising Plug Non-Rotating Plug page 4 AGIMC-0347-US-1303 Copyright 2013 Pentair
Stabilized Connectors (Futbols) The Anderson Greenwood Stabilized Futbol/Connector (AGSF) is used as the connection between a orifice fitting or flange and manifold on direct mounted differential pressure measurement installations. The AGSF unique design provides support of the entire installation while transferring the radial-stress load away from the NPT connections. The AGSF comes in both a short and a long version for clearance requirements (crank handles, Simplex style clamping bar, orifice plate housing, etc.). Features and benefits Unique design provides support of the entire installation while transferring the radial-stress load away from the NPT connections. Quick, easy, one-handed installation. Large footprint reduces radial-stress load on the NPT threads. Slotted bolt holes accommodate 2 1 /8" to 2 1 /4" bolt spacings. Available with dielectric shielding which provides a non-conductive barrier between the instrument and the orifice fitting. Universal design for both vertical and horizontal mount configurations. Available in standard length (4") or extended length (5.6") for additional clearance requirements. Oxygen or chlorine cleaning available. Available in stainless or carbon steel construction. High temperature (GRAFOIL ) flange gaskets available. No special tools required for installation. Ordering Information for Futbols Body Length S Short (standard clearance - overall length 4.0" [101.6 mm]) L Long (additional clearance - overall length 5.6" [142.4 mm]) Construction Material S A351-CF8M (316 SS) C A216-WCB (CS) Dielectric Shielding Option DI-D Dielectric Shielding - Delrin Construction AGSF L S DI-D SSC Options H OC SSA 1 SSB SSC 1 GRAFOIL Gaskets (not available with incorporation of dielectric shielding option) Cleaned for oxygen service SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg] 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg] Notes: 1. 316 SS bolts lower pressure ratings to a maximum of 4500 psi [310 barg]. Consult factory for full rating with 316 SS bolts. 2. All standard AG stabilized connectors include Teflon gaskets. 3. All standard AG stabilized connectors include Carbon Steel A193 B7 bolts. Copyright 2013 Pentair AGIMC-0347-US-1303 page 5
Ordering Information (patent pending) IMS AF 5GC H V I S 4 FS Style AF Direct Mount (Flange x Flange) 3 /8" [10 mm] full bore TF Remote Mount (Pipe x Flange) 3 /8" [10 mm] full bore AFD Direct Mount, Double Block and Bleed (Flange x Flange) 3 /8" [10 mm] TFD Remote Mount, Double Block and Bleed (Pipe x Flange) 3 /8" [10 mm] Type 2 2-Valve Gauge Pressure Rosemount 305 2B 2-Valve Gauge Pressure Biplanar 2C 2-Valve Gauge Pressure Rosemount 305 with no Coplanar flange 3 3-Valve Rosemount 305 3B 3-Valve Biplanar 3C 3-Valve Rosemount 305 with no Coplanar flange 5G 5-Valve (Gas) Rosemount 305 5GC 5-Valve (Gas) Rosemount 305 with no Coplanar flange 5GB 5-Valve (Gas) Biplanar 5GD 5-Valve, Dual Mount DP and Gauge Pressure Rosemount 305 5GDC 5-Valve, Dual Mount DP and Gauge Pressure Rosemount 305, with no Coplanar flange 5GDB 5-Valve, Dual Mount DP and Gauge Gas Biplanar 5P 5-Valve (Power) Rosemount 305 5PB 5-Valve (Power) Biplanar 5PC 5-Valve (Power) Rosemount 305, with no Coplanar flange Tap Orientation H Horizontal V Vertical Packing V Teflon E Low Emissions Graphite H GRAFOIL Seat IS 316 SS Seat on Block and TI Teflon, Block Module only Integral on Instrument Module EI PEEK, Block Module only DI Delrin, Block Module only Material S 316 SS/316SSL M Monel C CS End Connection (IMSTF or IMSTFD only) 4 1/2" Female NPT x Female Ports Options AM AGCO Mount Kit for 2-inch pipe stand mounting of manifold AMS 316 SS AGCO Mount Kit for 2-inch pipe stand mounting of manifold BL Bonnet Lock Device (patent protected) FS FIRESAFE to API 607 CL Cleaned for chlorine service OC Cleaned for oxygen service SSA 1 SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg] SSB 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating SSC 1 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg] SG3 (Sour Gas) meets the requirements of NACE MR0175/ISO 15156 (for Chloride conditions > 50 mg/l [ppm]) SP Special Requirements - please specify VALVES & CONTROLS Note: 1. 316 SS bolts lower pressure ratings to a maximum of 4500 psi [310 barg]. Consult factory for full rating with 316 SS bolts. 5500 WAYZATA BLVD # 800, MINNEAPOLIS, MN 55416 WWW.PENTAIR.COM/VALVES All Pentair trademarks and logos are owned by Pentair, Ltd. All other brand or product names trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice. Pentair is an equal opportunity employer. page 6 AGIMC-0347-US-1303 Copyright 2013 Pentair