MIRAGE Mirage Panel 8 8 1 16 Coverage Mirage Mirage Test Data. Section Properties or Load Tables For any available Testing Data, Section Properties, or Load Tables, please visit www.mcelroymetal.com. For all other additional information, please contact the McElroy Engineering Department at 1-800-950-9082. Details: - Minimum Slope: 1/4:12 Factory applied sealant is required in seam (side laps) at less than 3:12 slope. - Can be installed over solid deck or open framing - Mirage is also available with MoistureLok Mirage Seam Detail Mirage Panel Panel Options: Factory applied Sealant (for 3:12 or less slope). Mirage Clip - Panel width: 16 - Panel configurations: ribbed - Coating: - Kynar 500 (PVDF) Fastener - Mirage is produced in Adelanto, CA - Substrate: - Standard 24 GA Galvalume Notes: - Oil canning is a natural occurrence in metal panels and is not cause for panel rejection. - Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a McElroy Metal color chart. - Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroy s website at www.mcelroymetal.com. 1
MIRAGE TRIM Simple Eave 3 3/ 1 3/ Sculptured Eave 1/ 1 1/ 4 1/ 3 1/ Rake Trim 6 1/ 1 1/ Rake Tie-In Rake Slide Rake Closure 3/ 2 1/ 5 3/8 1/ 1/ 6 3/ Up Zee Closure Floating High Tie-In Trim Alternate High Tie-In Trim 1 1/ 1 2 1/ 1 1/ 2 1/ 1 1/ 1 3/ 1 3/ 1 3/8 5 3/ 3 7/8 High Eave Trim 1 1/ 7 1/ Alternate High Eave Trim 1 1/ 7 Fixed Ridge Cap 11 1/ 11 1/ Alternate Fixed Ridge Cap 9 9 Floating Ridge Cap 7 7 Alternate Floating Ridge Cap 5 3/ 5 3/ 2 specify roof pitch 1 3/ 1 3/ 1 3/ 1 3/ H Indicates an open hem - All other hems are closed.
MIRAGE TRIM Fixed Peak Box For 3:12 (Additional Roof Pitch Available - 1:12 to 6:12) Floating Peak Box For 3:12 (Additional Roof Pitch Available - 1:12 to 6:12) Cinch Angle 2ʼ - 1ʼ - 8 7 1/8 11 13/16 24 GA 1ʼ - 8 24 GA 2ʼ - 0ʼ - Outside Corner Box for Standard Gutter Up to 3:12 Pitch 10 10 Gutter Corner Box for Sculptured Eave 6 1/ 4 1/8 3 1/ High Corner Box 10 8 3/ Snow guards required to prevent Outside Corner Box for Standard Gutter Above 3:12 to 6:12 Pitch 10 1/ 8 1/8 4 3/ Snow guards required to prevent Gutter Strap 3 1/ 3/ Snow guards required to prevent Gutter Up to 3:12 Pitch 5 1/8 7/8 Snow guards required to prevent Gutter End Cap Up to 3:12 Pitch Gutter Above 3:12 to 6:12 Pitch 7/8 5 3/8 3 3/ 2 1/ Snow guards required to prevent Gutter End Cap Above 3:12 to 6:12 Pitch 15/16 15/16 1 11/16 3 7/16 4 3/ Up 5 1 11/16 2 7/16 4 3/ Up 5 3/16 3 specify roof pitch 3 7/8 H 3 15/16 Indicates an open hem - All other hems are closed.
TRIM MIRAGE Adelanto Downspout 2 1/ 2 1/ H H 90 90 95 95 Adelanto Downspout Strap 1/ 3 3/8 Adelanto Aluminum Downspout Outlet 5 7/8 3 3/8 3 7/8 4 1/ N/A SPECIAL RAKE AND GUTTER TRIM 5 1/ Gutter Manufactured in Adelanto, CA 3/ 3/8 5 1/ Barge Manufactured in Adelanto, CA 5 Mirage Gutter Clip Item #: 241429 3/ 5 1/ 3 1/8 1 1/ 5 1/ 5 3/8 Snow guards required to prevent 3/ N/A Mirage 5 1/ Barge Cleat Painted Item #: 206556 Bare Item #: 206557 Rainhead Gutter (Adelanto, CA) 3/ 7/8 3/8 1/ 1 1/ 5 3/8 7 3/ 1/ 5 16 ACCESSORIES Utility Eave Plate Item #: 221025 1 1/ 15/16 Mirage Clip Item #: 212674 #10-12 x Type A Pancake Head Woodgrip - Plain Item #: 36116001 1 1/ 4 specify roof pitch 10ʼ - 0 H Indicates an open hem - All other hems are closed.
ACCESSORIES #10-16 x TEK2 Pancake Head 2/2 Quadrex Self-Driller - Plain Item #: 36117 MIRAGE 1/4-14 x 1 1/ TEK2 ZAC 3/8 HWH Plain (Part # Varies by ) 1/4-14 x 7/8 LAPTEK ZAC Self-Driller (Part # Varies by ) HHAB #14-10 x 1 1/ Type A ZAC Tapper (Part # Varies by ) 1/4-14 x 1 1/ Shoulder TEK2 3/8 HWH W/O Washer - Plain Item #: 10975 Butyl Bead Tape Sealant 1/ x 5/16 x 20ʼ Item #: 95462 Butyl Tape Sealant 1/ x 3/3 x 45ʼ Item #: 94680 Butyl Tape Sealant 3/3 x x 45ʼ Item #: 95335 Titebond Caulk Sealant (Part # varies by color) Butyl Tube Sealant Item #: 95342 43D Pop Rivet (Part # Varies by ) Touch-Up Paint Pen (Part # Varies by ) Mirage Outside Closure Item #: 38622 Mirage Inside Closure Item #: 38621 Hem-Down Tool Item #: 38618 Hem-Up Tool Item #: 38617 2ʼ - 8 Mirage Notching Tool Item #: 38619 2ʼ - 8 5
MIRAGE II Mirage II Panel 8 8 1 3/ 16 Coverage Mirage II Mirage II Test Data. Section Properties or Load Tables For any available Testing Data, Section Properties, or Load Tables, please visit www.mcelroymetal.com. For all other additional information, please contact the McElroy Engineering Department at 1-800-950-9082. Mirage II Seam Detail Mirage II Panel Mirage II Clip Factory applied Sealant (for 3:12 or less slope) Fastener Details: Panel Options: - Minimum Slope: 1/4:12 Factory applied sealant is required in seam (side laps) at less than 3:12 slope - Can be installed over solid deck or open framing - Mirage II is produced in Bossier City, LA and Ashburn, GA - Panel width: 16 - Panel configurations: ribbed - Coating: - Kynar 500 (PVDF) - Substrate: - Standard 24 GA Galvalume Notes: - Oil canning is a natural occurrence in metal panels and is not cause for panel rejection. - Please contact a McElroy representative for specific pricing, lead times, special colors or gauges that may not be on a McElroy Metal color chart. - Contents in this manual are subject to change without notice. To confirm this book is the most current copy, please visit McElroy s website at www.mcelroymetal.com. 6
MIRAGE II TRIM Simple Eave 3 3/ 1 3/ Sculptured Eave 1/ 1 1/ 4 1/ 3 1/ Rake Trim 1 1/ 6 1/ Rake Tie-In Rake Slide Rake Closure 3/ 2 1/ 5 3/8 1/ 1/ 6 3/ Up Zee Closure Floating High Tie-In Trim Alternate High Tie-In Trim 1 1/ 1 2 1/ 1 1/ 2 1/ 1 1/ 1 3/ 1 3/ 1 3/8 5 3/ 3 7/8 High Eave Trim 1 1/ 7 1/ Alternate High Eave Trim 1 1/ 7 Fixed Ridge Cap 11 1/ 11 1/ Alternate Fixed Ridge Cap 9 9 Floating Ridge Cap 7 7 Alternate Floating Ridge Cap 5 3/ 5 3/ 7 specify roof pitch 1 3/ 1 3/ 1 3/ 1 3/ H Indicates an open hem - All other hems are closed.
MIRAGE II TRIM Fixed Peak Box For 3:12 (Additional Roof Pitch Available - 1:12 to 6:12) Floating Peak Box For 3:12 (Additional Roof Pitch Available - 1:12 to 6:12) Cinch Angle 2ʼ - 1ʼ - 8 7 1/8 11 13/16 24 GA 1ʼ - 8 24 GA 2ʼ - 0ʼ - Outside Corner Box for Standard Gutter Up to 3:12 Pitch 10 10 Gutter Corner Box for Sculptured Eave 6 1/ 4 1/8 3 1/ High Corner Box 10 8 3/ Snow guards required to prevent Outside Corner Box for Standard Gutter Above 3:12 to 6:12 Pitch 10 1/ 8 1/8 4 3/ Snow guards required to prevent Gutter Strap 3 1/ 3/ Snow guards required to prevent Gutter Up to 3:12 Pitch 5 1/8 7/8 Snow guards required to prevent Gutter End Cap Up to 3:12 Pitch Gutter Above 3:12 to 6:12 Pitch 7/8 5 3/8 3 3/ 2 1/ Snow guards required to prevent Gutter End Cap Above 3:12 to 6:12 Pitch 15/16 15/16 1 11/16 3 7/16 4 3/ Up 5 1 11/16 2 7/16 4 3/ Up 5 3/16 8 specify roof pitch 3 7/8 H 3 15/16 Indicates an open hem - All other hems are closed.
TRIM Downspout BBPPS MIRAGE II Downspout Strap BBPDSS 10 Aluminum Downspout Outlet Box BBPOUT 4 3/ 1 3/8 Only available in 26 Ga. 14ʼ x Downspout Elbow A-Style BBPELA Lock-Seam Downspout 2 1/ 2 1/ H H 9.5 90 90.5 95 95 Only available in 26 Ga. 14ʼ - Only available in 26 Ga. 8.5 24 GA (Ashburn, GA) Lock-Seam Downspout Outlet - Standard Lock-Seam Downspout Strap 3 3/8 5 7/8 3 7/8 3 3/8 3 3/8 4 1/ SPECIAL RAKE AND GUTTER TRIM 7 Gutter Manufactured In Ashburn, GA 1/ 3/8 7 Barge Manufactured in Ashburn, GA 4 7/8 Mirage II Gutter Clip Item #: 38973 7 3/ 5 1 3/ 7 4 7/8 3/8 Snow guards required to prevent 1/ N/A Mirage II Barge Clip Item #: 39020 (To be used with 7 Barge)) 9 specify roof pitch N/A H Indicates an open hem - All other hems are closed.
ACCESSORIES Utility Eave Plate Item #: 17477 1 1/ 15/16 MIRAGE II Mirage II 8 Clip Item #: 38978 #10-12 x Type A Pancake Head Woodgrip - Plain Item #: 36116 1 1/ #10-16 x TEK2 Pancake Head 2/2 Quadrex Self-Driller - Plain Item #: 36117 10ʼ - 0 1/4-14 x 1 1/ TEK2 ZAC 3/8 HWH Plain (Part # Varies by ) 8 1/4-14 x 7/8 LAPTEK ZAC Self-Driller (Part # Varies by ) HHAB #14-10 x 1 1/ Type A ZAC Tapper (Part # Varies by ) 1/4-14 x 1 1/ Shoulder TEK2 3/8 HWH W/O Washer - Plain Item #: 10975 Butyl Bead Tape Sealant 1/ x 5/16 x 20ʼ Item #: 95462 Butyl Tape Sealant 3/8 x 3/3 x 45ʼ Item #: 95340 Butyl Tape Sealant 3/3 x x 30ʼ Item #: 95345 Titebond Caulk Sealant (Part # varies by color) White Urethane Sealant Item #: 95320 Butyl Tube Sealant Item #: 95342 43D Pop Rivet (Part # Varies by ) Touch-Up Paint Pen (Part # Varies by ) Mirage II Outside Closure Item #: 39018 Mirage II Inside Closure Item #: 39017 Hem-Down Tool Item #: 38618 Hem-Up Tool Item #: 38617 2ʼ - 8 2ʼ - 8 10