igubal igubal Easy to fit Extremely cost-effective Resistant to chemicals Light weight High strength 55.1
igubal Technical data igubal igus GmbH 51147 Cologne Internet www.igus.de E-mail info@igus.de The use of pivoting bearings is usually associated with high weight materials, difficult installation, and high costs. Most of the time, maintenance is still necessary long term, and the bearings are only corrosion resistant in special designs. Often roller bear ings or plain bearings malfunction pre maturely due to high edge loads, or because they need to be readjusted, reamed, or re fitted in order to compensate for align ment errors. igubal pivoting bearings put an end to all of these disadvantages and open up many new possibilities for your engineering design. igubal pivoting bearings are: l Easy to fit l Especially cost-effective l Light weight l High strength Area of Application Ease of installation makes diverse applications possible for igubal pivoting bearings. They can be used anywhere. The self-aligning feature offers design advantages or helps to simplify assembly. Tolerances Maintenance-free igubal pivoting bearings are designed to be oversized before being pressfitted. After correct installation into a recommended housing bore, the inner diameter adjusts to meet our specified to l erances. Please pressfit the igubal pivot - ing bearings into a housing tolerance of H7, and use a shaft of h tolerance, normally h6 to h9 (see page 64.45 for igus shafts). This will help to ensure optimal performance of iglidur plain bear ings. If you have any ques - tions, please contact an iglidur technical expert for assistance. Installation igubal pivoting bearings are pressfitted into a recommended housing bore and axially secured. An exact orientation of the bear ing housing is not necessary, since the spheri cal bearing compensates for alignment errors. Dimensions igubal pivoting bearings are manufactured according to DIN ISO 12240 dimensional series K and E. The product range provides dimensions from 0.19 to 1.0 and 2 to 30 mm. Please contact us if you need other dimensions. Structure of the part numbers for igubal pivoting bearings The part numbers of igubal pivoting bear ings are designed according to the follow ing system: K GL M-08 LC series K = series K E = series E Design GL = Spherical bearing Measuring system M = I = Inches Nominal dimensions of the inner diameter Design LC = low cost The example shows a metric spherical bear ing of the dimensional series K with a spherical ball inner diameter of 8 mm. 55.2 www.igus.de/en/igubal
igubal KGLM/EGLM mm C KGLM Load Data and Dimensions [mm] 30 l Compensates for alignment errors l Corrosion resistant l Compensates for edge loads l High vibration dampening capacity l Suitable for rotating, oscillat - ing and linear movements l Light weight K GL M-04 KGLM-02 300 60 1 2 8 4 3,0 32 KGLM-03 550 200 2 3 10 6 4,5 32 KGLM-05 1300 500 5 5 13 8 6,0 30 KGLM-06 1800 650 10 6 16 9 6,5 29 KGLM-08 2700 1200 12 8 19 12 9,0 25 KGLM-10 4000 1400 20 10 22 14 10,5 25 KGLM-12 5400 1500 30 12 26 16 12,0 25 KGLM-14 6000 2500 35 14 28 19 13,5 25 KGLM-16 8000 3000 40 16 32 21 15,0 23 KGLM-18 9000 4000 45 18 35 23 16,5 23 KGLM-20 10000 5000 55 20 40 25 18,0 23 KGLM-22 11700 6500 60 22 42 28 20,0 22 KGLM-25 13600 7500 65 25 47 31 22,0 22 KGLM-30 20000 9000 70 30 55 37 25,0 22 * The maximum stat. axial load is determined in a remote location hole. iglidur W300 Chapter 5 Part Number Max. static Maximum C Max. Compressive Strength Torque [mm] [mm] [mm] [mm] Pivot radial axial* through ball E10 Angle [N] [N] [Nm] Pivoting bearing series mm KGLM/EGLM C EGLM Load Data and Dimensions [mm] 30 E GL M-04 Pivoting bearing series Part Number Max. static Maximum C Max. Compressive Strength Torque [mm] [mm] [mm] [mm] Pivot radial axial through ball E10 Angle [N] [N] [Nm] EGLM-04 600 50 1 4 12 5 3,0 37 EGLM-05 1000 130 2 5 14 6 4,0 33 EGLM-06 1200 150 2,5 6 14 6 4,0 27 EGLM-08 1800 175 7 8 16 8 5,0 24 EGLM-10 2500 400 14 10 19 9 6,0 24 EGLM-12 3800 650 25 12 22 10 7,0 21 EGLM-15 5500 1000 30 15 26 12 9,0 21 EGLM-16 6000 1150 32 16 28 13 9,5 21 EGLM-17 6300 1200 35 17 30 14 10,0 21 EGLM-20 9000 1400 40 20 35 16 12,0 18 EGLM-25 14000 2900 55 25 42 20 16,0 16 EGLM-30 17000 4000 70 30 47 22 18,0 13º 55.3
igubal KGLM SL Pivoting earing Slim line mm mm KGLM SL/H D C C 5ϒmax. D f 30ϒ pressfit in hole K GL M-08 SL Slim line Diameter Spherical bearing series igus GmbH 51147 Cologne l Very small space, halved wall thickness compared to KGLM l Angle balancing up to 5 l Low weight Load Data and Dimensions [mm] igubal Mini KGLM-SL iglidur W300 Chapter 5 Part Number Max. static compressive Max. static compressive f Max. strength (short term) strength (long term) [mm] [mm] [mm] [mm] Pivot radial axial radial axial E10 Angle [N] [N] [N] [N] KGLM-08 SL 2700 450 1350 225 8 14 9,0 0,5 5 KGLM-10 SL 4000 750 2000 375 10 16 10,5 0,5 5 KGLM-12 SL 4500 750 2250 375 12 18 12,0 0,5 5 KGLM-16 SL 6500 500 3250 250 16 22 15,0 0,5 5 Available from stock Internet www.igus.de E-mail info@igus.de 55.4 www.igus.de/en/igubal
igubal KGLM LC Pivoting earing Low Cost mm C K GL M-10 LC Low Cost Diameter Spherical bearing series inch KGLM LC l Spherical ball can be replaced l Easy to fit l Low Cost earing material can be varied (standard is iglidur W300) Page 57.3 Load Data igubal Pivoting earing KGLM LC variable Page 57.3 Part Number Max. static compressive Max. static compressive strength (short term) strength (long term) radial [N] axial [N] radial [N] axial [N] KGLM-10 LC 4000 1400 2000 700 KGLM-12 LC 5400 1500 2700 750 KGLM-16 LC 8000 3000 4000 1500 KGLM-20 LC 10000 5000 5000 2500 KGLM-25 LC 13600 7500 6800 3750 KGLM-30 LC 20000 9000 10000 4500 Dimensions [mm] igubal Pivoting earing KGLM LC with iglidur W300 spherical ball Part Number C f Max. Pivot E10 [mm] [mm] [mm] [mm] [mm] Angle KGLM-10 LC 10 22,0 14 10,5 0,8 25 KGLM-12 LC 12 26,0 16 12 0,8 25 KGLM-16 LC 16 32,0 21 15 0,8 23 KGLM-20 LC 20 40,0 25 18 0,8 30 KGLM-25 LC 25 47,0 31 22 0,8 23 KGLM-30 LC 30 55,0 37 25 1,0 22 www.igus.de/en/kglm 55.5
igubal ECLM Pivoting Clip earing mm mm ECLM d4 b2 b1 y E CL M-05-02 Sheet thickness Diameter Clip in style style l Very easy installation by simply snapping into sheet metal l No additional axial securing necessary l Extremely small installation space: Space-saving, thin-walled design l Maintenance-free iglidur J spherical ball Load Data igubal Pivoting earing ECLM iglidur J Chapter 3 igus GmbH 51147 Cologne Part Number Maximum static Maximum static Compression Force (Short term) Compression (Long term) radial axial radial axial [N] [N] [N] [N] ECLM-05-02 700 25 350 12,5 ECLM-06-02 700 25 350 12,5 ECLM-08-02 1000 25 500 12,5 ECLM-10-03 1400 15 700 7 ECLM-12-03 1800 20 900 10 ECLM-16-03 2800 40 1400 20 Dimensions [mm] igubal Pivoting earing ECLM Part Number Ø Spherical Spherical Ø Outside Ø Collar Housing Sheet Pivot all all Width Width thickness Angle d4 b1 Y α Internet www.igus.de E-mail info@igus.de ECLM-05-02 5 6 12 13 2,0 3,9 6,0 25 ECLM-06-02 6 6 12 13 2,0 3,9 6,0 18 ECLM-08-02 8 6 14 15 2,0 3,9 6,0 16 ECLM-10-03 10 6 16 17 3,0 4,5 6,7 12 ECLM-12-03 12 6 18 19 3,0 4,5 6,7 12 ECLM-16-03 16 6 22 24 3,0 4,5 6,7 12 Available from stock 55.6 www.igus.de/en/eclm
igubal ECLM Pivoting Clip earing Heavy Duty mm earing material can be varied (standard is iglidur W300) Page 57.3 d4 Y E10 E CL M-10-05 HD Heavy Duty sheet thickness Diameter Clip in style style mm ECLM l High axial and radial loads l Easily clips into sheet metal l No additional axial fastening necessary l Extremely compact design and installation l Adjustment of axial and radial clearance by pre-loading l Maintenance-free iglidur spherical balls l For sheet thickness 5 mm Load Data igubal Pivoting earing ECLM Heavy Duty variable Page 57.3 Part Number Maximum static Maximum static long term Compression Force (Short term) Compression (Long term) radial axial radial axial [N] [N] [N] [N] ECLM-10-05 HD 2500 150 1250 75 Dimensions [mm] igubal Pivoting earing ECLM Heavy Duty Part Number Ø Spherical Spherical Ø outside Ø Collar sheet- Pivot all all Width thickness Angle d4 Y α E10 0,15 0,1 ECLM-10-05 HD 10,0 9,0 22,0 28 5,0 24 For another spherical bearing material instead of iglidur W300, please add J, R, X or UW to the part number: e.g. ECLM-10-05 HD J. Spherical bearing material to choose Page 57.3 XEM: High Temperatures REM: Low Cost JEM: Low moisture absorption UWEM: for under water applications J4VEM: Clearance-free spherical ball Page 57.6 www.igus.de/en/eclm 55.7
igubal EGFM Pivoting earing mm mm EGFM igus GmbH 51147 Cologne Internet www.igus.de E-mail info@igus.de 55.8 l Maintance-free, dry-running l Easy to fit l Can compensate for a housing tolerance of 0,2 mm Dimensions [mm] igubal Pivoting earing EGFM E GFM- 08 T EGFM-08 T SL* 8 (H10) 15,8 16,5 18 5,0 6 1,1 15,8 16,2 11 EGFM-10 T 10 (E10) 20,8 21,6 26 6,0 9 1,0 20,8 21,2 24 EGFM-12 T 12 (E10) 22,8 23,6 28 7,0 10 1,0 22,8 23,2 21 EGFM-16 T 16 (E10) 29,8 30,6 35 9,5 13 1,5 29,8 30,2 21 EGFM-20 T 20 (E10) 34,8 35,6 42 12,0 16 2,0 34,8 35,2 18 EGFM-25 T 25 (E10) 41,8 42,6 50 16,0 20 2,0 41,8 42,2 16 EGFM-30 T 30 (E10) 46,8 47,6 55 18,0 22 2,0 46,8 47,2 13 * spherical ball from iglidur J iglidur W300 Chapter 5 Part Number d3 C b2 Housing Housing Max. Min. Max. Min. Max. Pivot [mm] [mm] [mm] [mm] [mm] [mm] [mm] Angle Load Data igubal Pivoting earing EGFM EGFM-08 T SL 1100 150 550 75 EGFM-10 T 1900 220 950 110 EGFM-12 T 2500 270 1250 135 EGFM-16 T 6000 600 3000 300 EGFM-20 T 9000 800 4500 400 EGFM-25 T 14000 2800 7000 1400 EGFM-30 T 17000 3000 8500 1500 Part Number Maximum static Maximum static Compression Force (Short term) Compression Force (Long term) radial axial radial axial [N] [N] [N] [N] Spherical bearing material to choose Page 57.3 REM: Low Cost JEM: Low moisture absorption UWEM: for under water applications J4VEM: Clearance-free spherical ball Page 57.6 www.igus.de/en/egfm Tolerance compensation Spherical bearing style
igubal EGZM Double Joint mm E GZ M-05-50 b x a l Maintenance-free, self-lubricating l Mechanical joining link between 2 components l Self-aligning to compensate for angular errors Special lengths are usually possible, please contact us Series E = Series E Design GZ = Double joint Measuring System M = metric Nominal dimension of the inside diameter Pitch X Load Data and Dimensions [mm] igubal Double Joint EGZM iglidur W300 Chapter 5 Double Joints mm EGZM Part Number Maximum Static Maximum Static X b a Radial Tensile Strength Axial Compressive Strength [mm] [mm] [mm] [mm] [mm] Short term Long term Short term Long term E10 [N] [N] [N] [N] EGZM-04-25 1100 550 1300 650 04 20 25 4 10 EGZM-04-50 1100 550 750 375 04 20 50 4 10 EGZM-04-75 1100 550 500 250 04 20 75 4 10 EGZM-05-25 1100 550 1300 650 05 20 25 4 10 EGZM-05-50 1100 550 750 375 05 20 50 4 10 EGZM-05-75 1100 550 500 250 05 20 75 4 10 EGZM-06-25 1100 550 1300 650 06 20 25 4 10 EGZM-06-50 1100 550 750 375 06 20 50 4 10 EGZM-06-75 1100 550 500 250 06 20 75 4 10 EGZM-08-60 3000 1500 3500 1750 08 30 60 7 15 EGZM-08-100 3000 1500 1900 950 08 30 100 7 15 EGZM-10-60 2500 1250 3500 1750 10 30 60 7 15 EGZM-10-85 2500 1250 2300 1150 10 30 85 7 15 EGZM-10-100 2500 1250 1900 950 10 30 100 7 15 EGZM-12-60 2000 1000 3500 1750 12 30 60 7 15 EGZM-12-100 2000 1000 1900 950 12 30 100 7 15 Spherical bearing material to choose Page 57.3 REM: Low Cost JEM: Low moisture absorption J4VEM: Clearance-free spherical ball Page 57.6 www.igus.de/en/egzm 55.9
igubal EGXM Double Joint mm mm EGXM Double Joints b2 b1 L R10 E GX M-06-75 Pitch Dimension Double Joint 90 turned series Special properties: l Double joint, 90 turned l Easy assembling l Custom-design, with or without ball stud l Maintenance-free iglidur W300 spherical ball d E10 Special lengths are usually possible, please contact us iglidur W300 Chapter 5 igus GmbH 51147 Cologne Load Data igubal Double Joint EGXM Part Number Maximum Permitted Maximum Permitted Tensile Force Compressive Force Short term Long term Short term Long term [N] [N] [N] [N] EGXM-06-75 1100 550 1600 800 Dimensions [mm] igubal Double Joint EGXM Part Number Ø Spherical Centre Head Housing all Distance Thickness Size d L b1 b2 EGXM-06-75 6 75 4 10 Internet www.igus.de E-mail info@igus.de 55.10 Further combinations: EGXM-06-75 ZM (with metal ball stud) EGXM-06-75 ZK (with plastic ball stud) EGXM-06-75 EK (with stainless steel ball) Available from stock www.igus.de/en/egxm
igubal KGLI Pivoting earing Inch C KGLI 30 K GL I- 03 Diameter Inch Pivoting bearing series Inch KGLI l Imperial dimensions l Compensates for alignment errors l Compensates for edge loads l Corrosion resistant l High vibration dampening capacity l Suitable for rotating, oscillating and linear movements l Light weight iglidur W300 Chapter 5 Load Data and Dimensions [Inch] igubal Pivoting earing KGLI Part Maximum static Maximum C Max. Number Compressive Strength Torque [Inch] [Inch] [Inch] [Inch] Pivot radial axial through ball E10 Angle [N] [N] [Nm] KGLI-03 1000 150 5,1900,5625,312,218 34º KGLI-04 1500 250 10,2500,6562,375,250 30º KGLI-05 2000 350 12,3125,7500,437,281 29º KGLI-06 2800 400 20,3750,8125,500,312 25º KGLI-07 3750 450 30,4375,9375,562,343 25º KGLI-08 4250 500 35,5000 1,0625,625,390 25º KGLI-10 5300 750 40,6250 1,1875,750,500 23º KGLI-12 8500 850 55,7500 1,4375,875,593 23º KGLI-16 13600 2500 65 1,0000 2,1250 1,375 1,005 23º Available from stock www.igus.de/en/kgli 55.11
igubal Costum Parts igubal Custom Parts Custom Solutions l Custom-made igubal spherical bearings starting from medium batch sizes l Short delivery times l Low-cost production l We can manufacture spherical balls in different iglidur materials l Maintance-free Internet www.igus.de E-mail info@igus.de igus GmbH 51147 Cologne 55.12 www.igus.de/en/igubal