ONSITE OFFERS FEBRUARY - MARCH

ONSITE OFFERS FEBRUARY - MARCH 2015

COMING SOON* COMING SOON* 18V XR COLLATED SCREWDRIVER DEWALT 18V XR EXTREME RUNTIME 5.0AH Batteries for extreme runtime INTRODUCING THE LATEST, HARDEST HITTING, LOWEST VIBRATING 18V BRUSHLESS SDS-PLUS CORDLESS ROTARY HAMMER DRILL. BUILT FOR THE TOUGHEST JOB SITES The essential tool for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. 5.0Ah 18 Volt Lithium Ion battery for maximum runtime. Drill over 90 holes on a single charge (10mm holes). Best in class vibration, 6.6m/s² lets you work safer and more comfortably for longer. Bright white LED improves visibility for your application. DCH274P2T-XE* DCH274N-XE* Battery Capacity 5AH Bare Unit 3 Mode ü ü Power Output 400W 400W No Speed (RPM) 0-1100 0-1100 Blows per 0-4600 0-4600 minute (BPM) Impact Energy 2.1J 2.1J (EPTA 05/2009) Vibration (m/s²) 6.6 6.6 (Tri-Axial) (inc. GST) 749 479 *Includes SDS+ Chuck and 13mm Keyless Chuck Extraction Unit sold seperately. (Inc. GST) 179 DCF620P2K-XE 18V XR BAND SAW * Includes both collated and single screw locking nose cone attachments for versatility One of the lightest and most compact tools on the market LED Light for worksite convenience Accepts most collated screws COMING SOON* ALSO AVAILABLE INTEGRATED DUST EXTRACTION UNIT D25303DH-XJ DEWALT 18V XR CUTTING POWER Smooth cuts leaves surfaces burr-free Creates little or no sparks XR BRUSHLESS MOTOR Powerful Brushless motor for heavy duty tasks Longer runtime and longer tool life Compact design and low weight, with no need for additional hoses gives near perfect balance. Essential for dust free drilling up to 16 mm in diameter. HEPA filter capable of achieving 99.5% efficiency with dust particles as small as 0.3 microns. Well balanced and easy to handle LED Light for worksite convenience 63mm cut capacity cuts up to DN 50 or 2 SCH 40 pipe DCS371N-XE *Only available as a bare unit in ANZ 2 3

NEW 18V XR RECIPROCATING SAW DEWALT 18V XR CUTTING POWER Compact ergonomic design only 2.3 kg - for improved access to restricted work spaces Centrally-located motor for improved balance Powerful four pole XR motor for fast cutting Four position blade clamp for improved versatility and flush cutting AC/DC WET & DRY VAC Powerful operation using either 14.4V/18V battery packs or mains supply. High efficiency washable HEPA filter traps 99.97% of dust can vacuum wet or dry without the need to change filter. DCV582-XE Voltage 14.4/ 18 Battery Capacity 1.3AH - 5.0AH Max. Airflow 15.9 l/sec Tank volume 7.5 L Power Source AC/DC Hose Nozzle 32mm Blower Yes 4.2 kg 279 EX GST 253.63 DCS387N-XE * Voltage 18V Power Output 610 W No Load Stroke Rate 0-2900 spm Stroke Length 28.6mm 2.3kg Height 363mm (inc. GST) 199 *Supplied as bare unit. THE NEW GENERATION OF PORTABLE JOBSITE LIGHTING High power LED spot and area lights with enough runtime for a full working day when used with an XR 5.0AH battery pack Ideal for tradespeople who work in a confined or poorly lit spaces for extended periods Durable rubberised handles and heavy duty build quality LED SPOTLIGHT DCL043-XE COMING SOON DCL043-XE * Voltage 18V Light Output 120-1000 Lumens 0.7kg Runtime < 10 hrs (inc. GST) 149 *Supplied as bare unit. DCL060-XE * Voltage LED AREA LIGHT DCL060-XE 18V Light Output 1500 Lumens 1.5kg Runtime < 4 hrs (inc. GST) 179 *Supplied as bare unit. NEW *Battery pack & USB cable not included. *DCV5801H-XJ Replacement filter available separately. USB POWER ANYWHERE CHARGE YOUR PHONE, TABLET & OTHER DEVICES 49 EX GST 44.54 USB charging adaptor turns any XR battery into a portable USB power source Bright State of Charge Indicator supports all battery voltages x2 USB Outlets 1.5A max current to charge multiple devices simultaneously DCB090-XJ 1.5 A Max current out 3 LED State of Charge Indicator Discharge Control 4 5

NEW LARGE ANGLE GRINDERS FEATURED & FULLY FEATURED 180MM & 230MM HEAVY DUTY FEATURED Dust Ejection System The dust ejection system deflects debris that would be harmful to the motor and allows cleaner air to pass over the motor. Anti-Vibration Rear Handle Reduces user fatigue DEWALT is constantly pushing the boundaries to create the most innovative tools for the construction professional. Power tools which carry the Perform & Protect shield have passed rigorous testing to ensure they exceed the highest demands of the toughest environments, while maintaining a fundamental emphasis on safety. All of these products have to meet strict criteria in one or more of the following core areas: Control; Vibration; Dust. Dust Sealed Bearings For prolonged product life 4KG MULTI DRILL Keyless Guard 3 Position Anti-Vibration Side Handle Reduces user fatigue SPECIFICATIONS DWE4557-XE DWE4559-XE Power Input 2400 Watts 2400 Watts NL Speed 8500 RPM 6500 RPM Wheel Diameter 180mm 230mm Spindle Diameter M14 M14 Switch Type Lock-on/off Lock-on/off Keyless Guard Yes Yes 5.5kg 5.7kg Inc. GST 219 219 Quick Change 3 jaw Chuck (QCC) provides speed, precision, and flexibility when drilling in wood, ceramic, and steel. Power and Speed The new hammer mechanism delivers 4.2J impact energy at an unrivalled speed of 0-4700 bpm 3 mode versatility for hammer-drilling, drill only, and chiselling. Active Vibration Control with floating back handle delivers extremely low vibration 8.2m/s². Increasing levels of user comfort and giving longer trigger time. Recessed mode selector for added durability 180MM & 230MM HEAVY DUTY FULLY FEATURED Constant Speed Under Load Consistent wheel speed even under load. Dust Sealed Bearings For prolonged product life E-Clutch The Electro-mechanical clutch reduces the kickback transmitted to the operator if the disc jams. E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs, which also extends the life of the gears and motor. Dust Ejection System The dust ejection system deflects debris that would be harmful to the motor and allows cleaner air to pass over the motor. Keyless Guard 3 Position Anti-Vibration Side Handle Reduces user fatigue Electronic Soft Start Limits the initial start up momentum, also minimises breaker trips. CONTROL Power-OFF OVERLOAD Protection The power supply will be reduced in case of motor overload. With continued motor overload, the tool will shut off. Anti-Vibration Rear Handle Reduces user fatigue E-switch Protection The ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned on and off) to restart tool. SPECIFICATIONS DWE4597N-XE DWE4599N-XE Power Input 2400 Watts 2400 Watts NL Speed 8500 RPM 6500 RPM Wheel Diameter 180mm 230mm Spindle Diameter M14 M14 Switch Type Lock-off/deadman Lock-off/deadman Keyless Guard Yes Yes 5.6kg 6.2kg Inc. GST 299 299 A NEW DIMENSION IN PRODUCTIVITY Class leading Performance: Combining a 1000 W motor and a high Bpm optimised hammer mechanism with innovative safety features, the new 32mm hammer range from DEWALT has set new standards in the 4kg class. D25414KT-XE Anti Rotational Technology protects the user by instantly reducing power to the unit in a bind up situation. 32MM HAMMER D25414KT-XE Power 1000W Impact Energy 4.2J 4.2kg Vibration 8.2m/s 2 Concrete Capacity 32mm BPM 0-4700bpm RPM 0-820rpm Size 250 mm x 370mm Quick Change Chuck ü 649 EX GST 590 6 7

COMING SOON* PLUNGE SAWS THE NEW DEWALT PLUNGE SAW RANGE. ALWAYS ON THE RIGHT TRACK. A NEW concept in DEWALT sawing - The plunge saw offers new levels of speed of set up, accuracy of cut and quality of finish. Central to this cutting system is the DEWALT track, which combines with other tools in the DEWALT range, with a full range of attachments and with dust management system to provide a complete job site solution. The DEWALT DWS520KT-XE plunge saw comes as standard with a 1.5m rail, AirLock adaptor and a TSTAK kit box. SYSTEM DEWALT guide rails can also be used with most DEWALT routers and circular saws, providing a complete system for the end user. DUST MANAGEMENT Fully compatible with the DEWALT dust management system. POWER High torque motor delivers powerful cuts in heavy duty applications. DUST MANAGEMENT Enclosed guard gives 90% dust extraction capability. ACCURACY Superior tool design and excellent rail system with fixed rail adjusters to eliminate deflection during a cut. SAFETY Anti kick back function. DURABILITY Full wave tachometric variable speed for motor protection even when used with hard woods. EASE OF USE Parallel plunge allows the user to maintain a smooth and constant hand position while cutting. VERSATILITY Lockable spindle lock for quick and easy blade changing. EASE OF USE Spring loaded riving knife which automatically retracts during plunge cuts. STANDARD EQUIPMENT FINISH The DEWALT guide rail system offers anti-splinter lips on both sides of the guide rails. BEVEL 47" bevel giving extra capacity in 2nd fix applications. RAIL STABILITY The underside of the rail features foam cushioning strips which keep the rail secure on the workpiece during cuts. DWS520KT-XE CAPACITY 165mm blade gives 55mm depth of cut on the rail (59mm off the rail). VERSATILITY DE6292-XJ jointing bar allows two rails to be joined together where extra capacity is required such as when cutting sheet material. DWS520KTK-XE BONUS PACK DWS5021-XJ DWS5025-XJ ACCURACY 48 tooth blade - very little breakout in laminates. DWS5026-XJ SPEED. ACCURACY. SYSTEM. SPECIFICATIONS DWS520KT-XE DWS520KTK-XE Power Input 1400W 1400W No Load Speed 1750-4000rpm 1750-4000rpm Blade Diameter 165mm 165mm Bevel Capacity 47 47 Max. Depth Cut at 45 44 44 Max. Depth Cut at 45 on Guide Rails 40 40 Max. Depth Cut 59 59 Max. Depth Cut on Guide Rails 55 55 5.1kg 5.1kg (inc. GST) 749 1049 PRODUCT SPECIFICATION DWS520KT-XE ATTACHMENTS AVAILABLE DWS5021-XJ DWS5026-XJ DWS5022-XJ DWS5023-XJ DWS5025-XJ EASE OF USE DWS5029-XJ DWS5030-XJ DWS5031-XJ DWS5032-XJ Low friction strip allows the saw to guide easily along the rail. DE6292-XJ DWV9210-XJ DE6292-XJ Bonus Plunge Saw accessories come as standard when you purchase the DWS520KTK-XE CODE DESCRIPTION DWS5021-XJ 1m guide rail 129 DWS5022-XJ 1.5m guide rail 179 DWS5023-XJ 2.6m guide rail 249 DWS5025-XJ Bag - for use with 1m and 1.5m DEWALT guide rails 79 DWS5026-XJ Clamps for use with DEWALT guide rails (Pair) 99 DWS5029-XJ Replacement edge strip 39 DWS5030-XJ Replacement Low Friction Strip (Top of Guide Rail) 39 DWS5031-XJ Router attachment for guide rail 99 DWS5032-XJ Replacement high friction strip (Bottom of Guide Rail) 39 DE6292-XJ Jointing Bar for DEWALT Guide Rails 39 8 9

NEW TABLE SAW LIGHTWEIGHT, HEAVY DUTY 254MM NEW DUST MANAGEMENT RANGE FROM DEWALT Compact Size with Large Cutting Capacities Fence Design Allows Rip Capacity to 610mm Rack & Pinion for BEST IN CLASS Accuracy and Ease of Use DUST Durable Roll Cage Positive On/Off Switch Easy to Use controls for Bevel, Mitre, Rip Fence Adjustments On Board Storage AVAILABLE LEGSTANDS DW745-XE Power Input 1700W Blade Speed 3800RPM Blade Diameter 254mm Blade Bore 16mm Bevel Capacity -3 to 48 Max. Ripping Capacity [right] 610mm Max. Ripping Capacity [left] 315mm Max. Depth of Cut at 90º 79mm Max. Depth of Cut at 45º 57mm Table Size 630x570mm 22kg 799 EX GST 726.36 INDUSTRY-LEADING DUST EXTRACTION SOLUTIONS When the Perform & Protect shield is awarded for dust, it is guaranteed the potential of inhaling dust is dramatically reduced to give a cleaner and safer working environment. Durable tank design for tough job site conditions Power Take Off Socket AirLock system allows quick, secure, rotatable connection to power tool 30L CAPACITY TSTAK compatible with Vac Rack attachments (DWV9500-XJ Vac Rack Adaptor sold seperately) Durable latch design Tough castor design to withstand job site conditions Convenient onboard tool storage. SPECIFICATIONS Power Input Max. Airflow Capacity Height Power Take Off Rating DWV900L-XE 1400W 4080 l/min 30 Litre 9.5 Kg 500mm 1000W Extract dust at source for a safer working environment, Increased accessory life and reduce jobsite clean-up time. The DEWALT AIR LOCK system allows for quick and easy connection to a tools dust port. 349 EX GST 317.27 DUST EXTRACTION ATTACHMENTS Patented rack and pinion fence system along with both front and rear fence lock combine to provide an extremely accurate cut. DE7400-XJ 279 EX GST 253.63 DE7450-XJ* *Unique to DW745-XE Table Saw 99 EX GST 90 CAT NO. DESCRIPTION DWV9210-XJ Basic Construction Kit. Includes 1 x DWV9000-XJ, 1 x DWV9130-XJ, 1 DWV9120-XJ 45 DWV9220-XJ Premium Woodworking Kit Includes 1 x DWV9000-XJ, 3 x DWV9130-XJ, 79 1 DWV9120-XJ, 1 x DWV9150-XJ, 1 x D279058CL-XJ DWV9000-XJ 35mm Hose Connector 25 DWV9110-XJ 29mm/30mm/35mm Rubber Stepped Adaptor 20 DWV9120-XJ 35mm/38mm Rubber Stepped Adaptor 20 DWV9130-XJ 35mm Outer Diameter Adaptor 20 DWV9150-XJ 35mm Angled Adaptor 20 D279058CL-XJ Power Cord to Hose Clips (5 Pack) 20 D279058CL-XJ DWV9000-XJ DWV9110-XJ DWV9120-XJ DWV9130-XJ DWV9150-XJ DWV9210-XJ DWV9220-XJ 10 11

NEW 5.0AH PACKS DELIVER 66% MORE RUNTIME* NEW 18V 3-SPEED XRP HEAVY DUTY HAMMER DRILL Designed to store more power providing XR tools with longer runtime without compromising size or weight. Use of E-Clutch technology provides the most compact Hammer Drill Driver ever from DEWALT E-Clutch Technology Precise finish first time, every time 34,000BPM for fast masonry drilling All metal chuck Increased performance & durability 80Nm Torque Brushless motor efficiency + High capacity battery = Extreme Runtime DCD985 237mm DCD995 213mm EXTREME RUNTIME BRUSHLESS VS BRUSHED DRILLS A standard motor contains carbon brushes which generate friction. The XR BRUSHLESS MOTOR eliminates this wasted energy, maximising the runtime and life of the tool. New 3-speed XRP draws cool, clean air from the base of the tool to maintain ideal running temperature. Result: your tool will last longer DCD995P2-XE Torque Length Power Output 80 Nm 213 mm 2.13 kg 650 W BPM 0-7650/22100/34000 RPM 0-450/1300/2000 Chuck size 1.5-13 mm 599 EX GST 544.54 LED work light On the foot reduces chuck shadow XR Intelligent switch module Maximum tool & battery protection XR Li-Ion 5.0Ah batteries Extended runtime & optimised power ELECTRONIC CLUTCH STANDARD MOTOR Friction causes a build up of heat around the motor 1000 900 800 700 600 500 400 300 200 100 0 DCD985M2-XE Brushed XRP Drill Ah Battery 607 No.4 x 46mm Dry Wall Screw into soft wood COOLER RUNNING XR BRUSHLESS MOTOR Longer runtime and longer tool life 1161 DCD995P2-XE Brushless XRP Drill 5.0Ah Battery The Intelligent trigger just got smarter, not only does it protect the tool and battery but it also now controls the clutch. The Electronic Clutch is smart enough to know what speed the drill is in, what torque setting is selected and even how hard you are pulling the trigger. The Electronic Clutch with 11 torque settings offers more precise control from fewer settings which means you get the job done better and faster. BRIGHT WHITE LED on the foot to reduce shadow HIGH CAPACITY BATTERY packs for extended runtime ALL METAL GEARBOX provides smooth power transfer and increased durability POWERFUL BRUSHLESS MOTOR for improved efficiency and heavy duty tasks 5.0AH BATTERIES ARE BACKWARDS COMPATIBLE WITH ALL XR TOOLS OF THE SAME VOLTAGE *VERSUS DEWALT DCB180-XE 3.0AH BATTERY PACK 12 13

50 40 30 20 10 0 10 20 NEW FRAMING NAILER 2-SPEED WITH 5.0AH TECHNOLOGY NEW ALSO AVAILABLE IN THE XR 5.0AH RANGE WHY 2 SPEEDS? SMALLER NAILS REQUIRE LESS FORCE TO DRIVE THEM HOME. USING A LOWER SPEED SETTING PROVIDES: - MORE RUNTIME - FASTER APPLICATION SPEED - LONGER TOOL LIFE 50-90mm 350mm DCN692P2-XE -15 C Battery Capacity 5.0Ah Nail diameter 2.8-3.3mm Magazine angle 30-34 Magazine loading Rear-load Nail length 50-90mm Magazine capacity Up to 55 nails 999 EX GST 908.18 50 C X2 Sec NO GAS Nail jams are simple to clear 18V XR 6-TOOL COMBO KIT 5.0AH DCK653P3-XE DCD995 Brushless XRP Hammer Drill, DCF895 Brushless 3-Speed Impact Driver, DCS380 Reciprocating Saw, DCS391 Circular Saw, DCG412 125mm Grinder, DCL040 LED work light, 3 x 5.0AH Slide Pack Batteries, Multi-voltage charger, DS300 & DS400 Tough System Kit Box Tough System Specification IP65 Dust tight & water jet resistant, Internal accessory storage, Side clips for stacking, Metal hinges and latches, Bi-material handles 18V XR 4-TOOL COMBO KIT 5.0AH DCK450P2-XE DCD795 Brushless Hammer Drill, DCF886 Brushless Impact Driver, DCS380 Reciprocating Saw, DCS391 Circular Saw, 2 x 5.0AH Slide Pack Batteries, Multi-voltage charger, DS150 & DS400 Tough System Kit Box Tough System Specification IP65 Dust tight & water jet resistant, Internal accessory storage, Side clips for stacking, Metal hinges and latches, Bi-material handles 1479 EX GST 1344.55 INCLUDES 1079 EX GST 980.91 INCLUDES COMPACT SIZE Fits easily between 400mm centre studs -15 c Profiled nose-piece provides stable platform Unique Bump Mode function allows user to fire 2 nails per second NO GAS! Completely battery powered operation allows for low maintenance, and more consistent operation especially in low temperatures Fault indicator lights communicate instantly why your nailer has failed to fire either a low battery or a nail jam Less noise Less recoil/vibration No storage of flammable gases No breathing in toxic chemicals REDEMPTION 18V XRP TWIN KIT 5.0AH 3 SPEED DCK251P2-XE DCD995 Brushless XRP 3 Speed Hammer Drill driver, DCF895 Brushless 3 Speed Impact Driver, 2 x 5.0AH Slide Pack Batteries, Multi-voltage charger, DS150 Tough System Kit Box DS150 Kit Box Included IP65 Dust tight & water jet resistant, Internal accessory storage, Side clips for stacking, Metal hinges and latches, Bi-material handles 3 PIECE SET VIA REDEMPTION WHEN YOU PURCHASE A DCK450P2-XE. BONUS PACK VALUED AT 147. GO TO WWW.GUARANTEEDTOUGH.COM.AU + 699 EX GST 635.45 BOTH TOOLS 3 SPEED ULTIMATE 5.0AH BATTERIES ARE BACKWARDS COMPATIBLE WITH ALL XR TOOLS OF THE SAME VOLTAGE 14 15

18V XR AH COMBO KITS XR 18V BARE UNITS 18V XR LI-ION 6-TOOL COMBO KIT DCK693M3-XE 1299 18V XR SDS HAMMER DRILL DCH254N-XE 379 EX GST 344.55 18V XR JIGSAW DCS331N-XE 279 EX GST 253.64 DCD985N-XE 18V XR XRP 3-Speed Hammer Drill DCF885N-XE 18V XR Impact Driver DCS380N-XE 18V XR Reciprocating Saw DCS391N-XE 18V XR Circular Saw DCG412N-XE 18V XR 125mm Angle Grinder DCL040-XE 18V XR LED Work Light DCB182-XE 18V XR Ah Batteries (x3) DCB105-XE XR Multi-Voltage Charger DS300 Tough System Modular Storage Unit DS400 Tough System Modular Storage Unit EX GST 1180.91 3 Mode Dedicated Cordless Hammer Drill Ideal for drilling anchors & fixing holes into concrete, brick & masonry Rotation stop for light chiseling Rotary only for metal and wood drilling Anti vibration control reduces user fatigue and maximises operating usage Intelligent trigger protects battery & tool Quick Change Chuck - Comes with 3 jaw chuck & SDS+ Chuck for increased versatility. Powerful 400W fan cooled motor Variable speed trigger & lock off switch Tool free adjustable shoe with antiscratch cover Patented keyless blade change Anti vibration counter balance mechanism 3 position pendulum action Dust blower keeps cut line clear of dust Intelligent trigger protects battery & tool BONUS XR COMPACT FM AM RADIO VALUED AT 159 DCR019-XE + 829 EX GST 753.63 629 EX GST 571.81 18V XR 125MM GRINDER DCG412N-XE Powerful 405W fan cooled motor 7000 RPM for fast cutting and grinding Steel cut spiral gears for highest durability Low profile gear case for greater access Two position side handle Quick change wheel release for productivity. M14 Spindle 125mm Max Disc Diameter Intelligent trigger protects battery & tool 199 EX GST 180.91 18V XR CIRCULAR SAW DCS391N-XE Powerful 460W motor for fast cutting even in the toughest of applications 3700 RPM for fast high torque cutting Extremely durable tool design, cast aluminum base Keyless bevel angle and depth of cut Spindle lock for quick and easy blade change Lock off switch & electronic motor brake 165mm Blade, Hex key, dust port Intelligent trigger protects battery & tool 219 EX GST 199.09 18V XR LI-ION 5-TOOL COMBO KIT DCK593M2-XE DCD985 XRP 3 Speed Hammer Drill driver, DCF885 Impact Driver, DCG412 125mm Grinder, DCL040 LED Light, DCS387 Reciprocating Saw, 2 x AH Slide Pack Batteries, Multi-voltage charger, DEWALT Job Site Bag 579 18V XR LI-ION 3-TOOL COMBO KIT DCK391M2-XE DCD985 XRP 3 Speed Hammer Drill driver, DCF885 Impact Driver, DCG412 125mm Grinder, 2 x AH Slide Pack Batteries, Multi-voltage charger, DEWALT Job Site Bag 599 18V XR IMPACT WRENCH DCF880N-XE Powerful 203 Nm Max Torque 1/2 (12.7mm) square socket drive All metal gearing for durability Aluminium front housing disperses heat and increases motor life 3 LED Halo ring provides maximum illumination Intelligent trigger protects battery and tool 199 EX GST 180.91 18V XR IMPACT DRIVER DCF885N-XE Powerful 155 Nm Max Torque 6.35mm drop in keyless hex driver All metal gearing for durability Aluminium front housing disperses heat and increases motor life 3 LED Halo ring provides maximum illumination Intelligent trigger protects battery and tool 149 EX GST 135.45 EX GST 526.36 + EX GST 544.54 BONUS: 18V XR LI-ION AH BATTERY VALUED AT 129 DCB182-XE 219 EX GST 199.09 279 EX GST 253.64 279 EX GST 253.64 18V XR LI-ION 2-TOOL COMBO KIT DCK290M2-XE : DCD985 XRP 3 Speed Hammer Drill driver, DCF885 Impact Driver, 2 x AH Slide Pack Batteries, Multi-voltage charger, DS150 Tough System Kit Box DS150 Kit Box Included: IP65 Dust tight & water jet resistant, Internal accessory storage, Side clips for stacking, Metal hinges and latches, Bi-material handles 18V XR LI-ION 2-TOOL COMBO KIT DCK295M2-XE : DCD985 XRP 3 Speed Hammer Drill driver, DCF880 Impact Wrench, 2 x AH Slide Pack Batteries, Multi-voltage charger, DS150 Tough System Kit Box DS150 Kit Box Included: IP65 Dust tight & water jet resistant, Internal accessory storage, Side clips for stacking, Metal hinges and latches, Bi-material handles * 18V XR RECIPROCATING SAW DCS380N-XE Powerful 560W motor for fast cuts 2950 Strokes per minute, 28.6mm stroke length Variable speed trigger & lock-off switch lever Pivoting adjustable shoe 4 Position blade clamp Intelligent trigger protects battery & tool * 18V XR HIGH TORQUE WRENCH DCF889N-XE 418Nm of torque and 2300 impacts per min Aluminium front housing disperses heat and increases motor life 1/2" (12.7mm) square socket drive Bright white LED light Intelligent trigger protects battery and tool * 18V XR METAL CIRC SAW DCS373N-XE Powerful 460W motor, 3700rpm for fast cutting Extremely durable tool design with steel shoe Spindle lock for easy blade change Transparent front guard and LED light Burr-free cuts at 43mm cutting depth Intelligent trigger protects battery and tool 16 17

CONSTRUCTION DEALS 18V XR HIGH TORQUE WRENCH AH KIT DCF889M2-XE Powerful fan cooled motor provides 540Nm of torque and 2300 impacts per minute All metal gearing for durability Aluminium front housing disperses heat and increases motor life 1/2 (12.7mm) square socket drive Bright white LED light Intelligent trigger protects battery and tool Standard Equipment 2 x Ah XR Li-Ion battery packs with state of charge indicator Multi-voltage XR charger Heavy duty kitbox 549 EX GST 499.09 Keyless adjustable guard METALWORKING DEALS ANGLE GRINDER 125MM (5") 1400W D28135-XE Anti Vibration side handle 1400W Dust Ejection System provides durability by ejecting damaging dust E-Clutch Keyless adjustable guard ANGLE GRINDER 125MM (5") 1400W NO-LOCK ON PADDLE SWITCH GRINDER D28114N-XE Anti Vibration side handle 1400W Dust Ejection System provides durability by ejecting damaging dust CONTROL BONUS 9 PCE IMPACT SOCKET SET VALUED AT 119 DT7507-QZ 3 MODE 2KG SDS + HAMMER DRILL D25013K-XE Drilling 4-22mm diameter anchor holes into concrete and masonry Impact stop for drilling in wood, steel, plastic & screwdriving applications Rotation stop for light chiselling in concrete & masonry Variable speed switch & full power in forward & reverse for total control Very compact design & low weight Same power in forward & reverse mode Low vibration level Mechanical clutch reduces sudden high -torque reaction should the bit jam Soft grip on main handle for comfort and safety 4m cord set + 219 EX GST 199.09 ADD THIS LED SIDE HANDLE D250521-XJ 29 EX GST 26.36 Dust ejection system removes majority of debris from the air Anti lock flange prevents flanges Abrasion protected motor for increased durability Tool free guard fitment for increased flexibility Anti vibration side handle to improve user comfort Fully leaded stator windings for increased motor durability Pop off brushes protect the armature from damage The low profile gear case allows access in confined areas One piece brush arm prevents brush hang up in extreme conditions Side positioned spindle lock gives greater protection Includes Protective keyless guard Multi-position anti vibration side handle Inner and outer disc flanges Spanner 209 EX GST 190 E-Clutch shuts the grinder off when a wheel pinch or wheel stall occurs 11,000 rpm DEWALT built G55 motor designed for higher overload protection No Lock-On paddle switch prevents the user from locking the grinder on Complete Electronic Control provides multiple advanced technology features such as E-Clutch, Power-Off, and Power-Loss Reset One-piece brush arm prevents brush hang-up due to dust ingestion Power-Off Advanced Overload Protection shuts the tool off before overload Power-Loss Reset prevents accidental re-starts Low profile, jam-pot gear case provides precise gear alignment Includes Protective keyless guard, Multi-position anti vibration side handle, Inner and outer disc flanges Hex Wrench 259 EX GST 235.45 *Suitable for D25013K-XE 184MM CIRCULAR SAW 1350W DWE560-XE Cuttaway inner guard improved cut line visibility Dust blower clears dust and debris from cut line High Power 1350W Motor 48 Bevel Capacity 65mm depth of cut 3m Cord 129 EX GST 117.29 POWERFUL 1350W MOTOR BONUS 4 800W GRINDER VALUED AT 89 DWE4001-XE 355MM ABRASIVE CHOP SAW D28710-XE 125MM SLIDE SWITCH SMALL ANGLE GRINDER + BONUS VALUED AT 109 + DWE4151-XE 2200W TUNGSTEN CARBIDE 355MM CHOPSAW DW872-XE Includes: 36 tooth saw blade, Rip Fence, Blade Spanner BONUS 184MM 24T BLADE VALUED AT 19 DT1214-QZ + 36T FINISHING BLADE CUTTAWAY INNER GUARD IMPROVED VISIBILITY Quick release clamp for fast work piece clamping High power abrasion protected motor delivers high overload capabilities for greater durability Spindle lock for quick & easy wheel change Adjustable spark guard allows user to control the direction of sparks Ergonomic handle design reduces fatigue 289 EX GST 262.73 Burr-free cuts at constant cutting depth High power 2200 Watt motor Electronic soft start for metal cutting Robust cool-running 355mm, 70 tooth tungsten carbide tipped blade 25.4mm arbor fitment Large tool-free pivoting fence for parallel and mitre cuts up to 45 Vertical clamping system for safety Max Cut at 90 (Square profile) 100x100mm 779 EX GST 708.18 18 19

NEW HIGH CAPACITY 5.0AH PACKS 66% MORE RUNTIME* *VERSUS DEWALT DCB180-XE 3.0AH BATTERY PACK DEWALT 82 Taryn Drive, Epping, Victoria 3076 Telephone: 1800 338 002 Fax: 1800 080 898 Your DeWALT Dealer: The yellow and black colour scheme is used on DEWALT Power Tools and Accessories as a trademark. DEWALT reserves the right to change any deal or price at any time without notice. Pricing includes GST unless otherwise stated. Onsite Offers promotion runs from 1/2/15 31/3/15. www.dewalt.com Any product highlighted as Coming Soon will be available after April 2015. Deals available while stocks last and only at participating stores. SMITH Be the first to see product news and special offers from DEWALT... Register at MYDEWALT to be sent onsite offers by email. Simply go to www.dewalt.com/mydewalt MY