SOLAR LED LIGHTING PRODUCTS

SOLAR LED LIGHTING PRODUCTS

WHY CONSIDER SOLAR LIGHTING PRODUCTS? ECONOMICAL NATURAL DISASTER RESISTANT The cost of solar power has fallen well below that of nuclear power and is set to fall further. Reducing maintenance costs by using solar power assemblies lasting 30+ years and by improving lamp life with LEDs, solar can have a quick ROI and even beats out the cost of traditional grid lighting systems in many cases. In fact, for some outdoor applications, such as roadways, lower installation costs and maintenance savings can far exceed energy savings. After a natural disaster hits, the loss of power is imminent. Solar power systems are a rugged and practical system that can generate electricity for homes, cities, and businesses when the electrical grid is off-line. LED solar lights require very little maintenance and are easier to install than their wired counterparts. Underground wiring, on-site transformers and electrical enclosures are typically costlier than installing new solar lights. Solar systems can withstand winds of up to 140 mph, the equivalent of a Category-4 hurricane, which has average winds speeds of 130 to 156 mph. LED technology means that the lamps require fewer replacements, can be controlled and provide significant energy savings over traditional lamps. Solar means there is no electric bill...ever. Hurricane season is a trying time for many, why not prepare with Solar Energy. SUSTAINABLE The sun comes up every day. That s the definition of renewable energy. Another sustainability plus is solar lighting s low environmental impact. For sensitive environments like wetlands, the seashore, or other sensitive ecosystems, solar lighting minimizes the impact on nature by avoiding below-grade services and unsightly enclosures. Solar lights can also utilize turtle friendly and dark sky compliant fixtures to lessen their impact on nature. Solar power helps combat greenhouse gas emissions and reduces our collective dependence on fossil fuel.

HOW DOES SOLAR ENERGY WORK? CONVERTING SUNLIGHT INTO ELECTRICITY When Sunlight hits a solar panel it produces electrons on the surface of the silicon material that it s made of. (Silicon is a semiconductor material that naturally releases electrons when exposed to sunlight). The negatively charged electrons migrate to the positive side of the solar panel circuit and are either stored as energy in a battery or the energy is immediately used for devices connected to the solar system. Solar panels produce direct current (DC Power) therefore their energy must be converted to AC (alternating current) before it can be used with every day appliances. This is accomplished by using an inverter. An inverter is a device that converts the DC power to AC power and also converts the solar panel s or battery s low voltage range of (12 volt, 24 volt or 48 volt) to a normal range of 120 volt or 240 volt that is typically used by your appliances. WHAT S THE DIFFERENCE BETWEEN MONOCRYSTALLINE AND POLYCRYSTALLINE SOLAR PANELS? Solar Panels are typically made of either Mono or Polycrystalline Silicon cells. Both technologies have improved sufficiently to give good arguments for either type of Silicon cell. This is true not only in terms of their efficiency but also in terms of their availability for mass commercial use and pricing. It s not difficult to find examples that illustrate the above points therefore Jademar develops solar products with either mono or poly crystalline silicon cells depending on the price, performance, efficiency and availability of the product. We will always strive to find the highest efficiency products that meet our customers needs.

Model #: PSAL10LED24-50DRMS Features: All-in one design : Perfect combination of solar power, LED, LiFePO4 battery, motion sensor, light sensor and timing control technology Lamp Wattage: Lumens: Efficiency: 10W 1000 lms 100 lpw Easy installation and less maintenance Integrated design without cabling. Can be installed on wood, or iron poles. Can be Mounted on wall surface outside any building structure. LED Lamp CCT: Listings/Ratings: Life Hours: Warranty 5000K CE, RoHS, IP65 50,000 Hrs 2 Yrs. Long life span : Using high power capacity and long life LiFePO4 battery. Saves energy: Integrates infrared sensor to save power and lighting performance. Housing Material: ABS Plastic for solar panel frame Weather Resistant Metal with rust-proof coating for LED Housing Solar Panel Mounting Height: Pole Distance: Panel: Charging Time: Lighting Time: Lifetime: 10-15 FT 30-36 FT Poly Crystalline Silicon 6-8 Hrs 12 Hrs 10 Yrs Adjustable mount Housing in Grey Finish Type: Grade A LiFePO4 (Lithium Iron Phosphate) MOUNTING OPTIONS Battery Capacity: 6AH Nominal Voltage: 9.6V Lifetime: >5 Yrs Dimensions: 20.3" x 10.2" x 3.0" Units/Ctn Weight/Ctn 4 pcs 42 lbs

Model #: PSAL20LED12-50DRMS-SB FEATURES: All In one New design Extruded aluminum housing ensures great heat dissipation. 150lm/w Branded EPISTAR chips PIR smart sensor control provides continuously lighting for 5 raining days after fully charged Adjustable poles and mounting brackets meet your every installation requirements 3 years warranty MOUNTING BRACKET Easy installation 150 degree adjustable Can be fixed on the wall MOUNTING OPTIONS LED Lamp Solar Panel Battery Lamp Wattage: Lumens: Efficiency: CCT: Listings/Ratings: Life Hours: Warranty Mounting Height: Pole Distance: Panel: Charging Time: Lighting Time: Lifetime: Type: Capacity: 20W 2720 lms 136 lpw 5000K CE, RoHS, IP66 50,000 Hrs 3 Yrs. 13-20 FT 25-30 FT Mono Crystalline Silicon 10-12Hrs 60 Hrs 20 Yrs Grade A LiFePO4 (Lithium Iron Phosphate) 20AH Nominal Voltage: 12.8V Lifetime: >5 Yrs Dimensions: 19.6" x 15.16" x 2.56" Units/Ctn Weight/Ctn 1 pc. 18.9 lbs.

LEVEL 12 WIND TEST UN38.8 Model #: Lamp Wattage: Lumens: PSRL30LED12-50DMS-SF 30W 6000 lms FEATURES: All- in one design, aluminum alloy die-casting housing Long lifespan of grade A power LiFePO4 battery pack High efficient 20% conversion Mono crystalline solar panel Adjustable angle light module Efficiency >200LM/W High charge efficiency MPPT controller Microwave sensor, remote control by one-key dimming, automatically Turn on at night and turn off during daylight. Ambient temperature: -4 F~ +122 F Half output when battery capacity less than 40% LED Lamp Solar Panel Battery Efficiency: CCT: Listings/Ratings: Life Hours: Warranty Mounting Height: Pole Distance: Panel: Charging Time: Lighting Time: Lifetime: Type: Capacity: 200 lpw 5000K CE, IP66 50,000 Hrs 5 Yrs. 10-20 FT 10-25 FT Mono Crystalline Silicon 7 Hrs 10 Hrs 20 Yrs Grade A LiFePO4 (Lithium Iron Phosphate) 30AH Nominal Voltage: 12.8V Lifetime: >5 Yrs Dimensions: 35.5 X 16.5 X 3.7 Units/Ctn Weight/Ctn 1 pc. 29.8 lbs.

19.3 Features: Patented solar lamp, aluminum body, powder coated painting, anti-rust corrosion Light Sensor, PIR, Time Control, Microwave Control. Adjustable Optics Solar Panel PRODUCT DIMENSION 11.0 27.3 LED Lamp Solar Panel Battery Fixture Solar Panel Model #: Lamp Wattage: Lumens: Efficiency: CCT: Listings/Ratings: Life Hours: Warranty Mounting Height: Pole Distance: Model # Panel: Charging Time: Lighting Time: Lifetime: Type: Capacity: PSRL80LED44-60DMS 80W 13600 lms 170 lpw 6000K CE, RoHS, FCC, IP65 50,000 Hrs 3 Yrs. 24-30 FT 20-30 FT PSRL80-SP160-36MS Mono Crystalline Silicon 5-6 Hrs <12 Hrs in Full Power Model 20-25 Yrs Nominal Voltage: 25.6V Lifetime: Grade A LiFePO4 (Lithium Iron Phosphate) 614.4WH/24AH 5-8 Yrs Dimensions: 14.96" x 19.49" x 31.69" Units/Ctn Weight/Ctn 1 pc. 43.7 lbs. Dimensions: 3.35" x 29.97" x 58.47" Units/Ctn 1 Weight/Ctn 50.3 lbs.

Model #: PSAL10LED24-50DRMS PSSL20LED12-50DRMS-SB PSRL30LED12-50DMS-SF PSRL80LED44-60DMS Led Lamp Solar Panel Housing Color: Charcoal Gray Gray Gray Gray Lamp Wattage: 10W 20W 30W 80W Lamp Voltage: 24V 22.4V 12V 43.8V Current: 417mA 670mA 2.5mA 1.8mA LED Chip: Epistar Epistar 3030 Philips 5050 Hongli Tronic 5050 Efficiency: 100 lpw 136 lpw 200 lpw 170 lpw Optics: Beam Angle: 120 x 120 136 x 78 70 x 150 140 x 75 Luminous Flux: 1000 lms 2720 lms 6000 lms 13600 lms CRI: 75 75 70 80 Construction: Aluminum Alloy Pure Aluminum Alloy and Polycarbonate Aluminum Alloy Die-Cast Type II or Type IV Distribution Adjustable Optics 2 Series 36 Parallel Protection Grade: IP65 IP66 IP66 IP65 Work Temperature: -13 F ~ +149 F -13 F ~ +149 F -4 F~ +122 F -13 F ~ +149 F CCT: 5000K 5000K 5000K 6000K Mounting Height: 10-15 FT 13-20 FT 10-20 FT 24-30 FT Pole Distance: 30-36 FT 25-30 FT 10-25 FT 20-30 FT Mounting Type: Certification CE, RoHS CE, RoHS CE CE, RoHS, FCC Life Hours: 50,000 Hrs 50,000 Hrs 50,000 Hrs 50,000 Hrs Warranty 2 Yrs. 3 Yrs. 5 Yrs. 3 Yrs. Model # PSRL80-SP160-36MS Panel: Poly Crystalline Silicon Mono Crystalline Silicon Mono Crystalline Silicon Mono Crystalline Silicon Angle: 15 150 110 Power: 15W 26W 52W 160W Voltage: 15V 18V 18V 36V Current: 1.0A >1.22A 2.83A 4.44A Adjustable 360 Horizontal / 60 Vertical Charging Time: 6-8 Hrs 10-12Hrs 7 Hrs 5-6 Hrs Lighting Time: 12 Hrs 60 Hrs 10 Hrs <12 Hrs in Full Power Model Lifetime: 10 Yrs 20 Yrs 20 Yrs 20-25 Yrs Controller Charge Controller PWM SES-IR2 Fixture Controller SES-TR2 MPPT (Maximum Power Point Tracking) Ensure Proper Battery Charging and Prolong Battery Life Programmable PWM Solar Controller MPPT (Maximum Power Point Tracking) Ensure Proper Battery Charging and Prolong Battery Life Adjustable Luminaire Current,Reduce LED Attenuation,Prolong LED Chip Life Battery Solar Panel Type: Grade A LiFePO4 (Lithium Iron Phosphate) Grade A LiFePO4 (Lithium Iron Phosphate) Grade A LiFePO4 (Lithium Iron Phosphate) Grade A LiFePO4 (Lithium Iron Phosphate) Capacity: 6AH 20AH 30AH 614.4WH/24AH Nominal Voltage: 9.6V 12.8V 12.8V 25.6V Lifetime: >5 Yrs >5 Yrs >5 Yrs 5-8 Yrs Dimensions: 20.3" x 10.2" x 3.0" 19.6" x 15.16" x 2.56" 35.5 X 16.5 X 3.7 14.96" x 19.49" x 31.69" Units/Ctn 4 pcs 1 pc. 1 pc. 1 pc. Weight/Ctn 42 lbs. 18.9 lbs. 29.8 lbs. 43.7 lbs. Dimensions: 3.35" x 29.97" x 58.47" Units/Ctn 1 Weight/Ctn 50.3 lbs.

POLE CONFIGURATIONS Poles used for solar lighting applications are built to meet the local AASHTO wind load requirements understanding the weight and EPA requirements. Every pole is custom ordered for the specific project with little variances. Poles can either be Aluminum, Stainless Steel, Fiberglass Composite or Concrete and come with Anchor Bases, Direct Burial configurations, or Transformer Bases. Pole heights range from 10 to 35 and provide a minimum of 3 at the top of the pole for mounting of the solar power assembly. Consult your designer for additional options and recommendations. ANCHOR BASE Pole is installed via cast-in-place steel anchor bolts which are sized according to the pole loading and AASHTO wind zone. This is the most popular installation method. DIRECT BURIAL Pole includes an integral shaft extension which is installed below grade and reinforced with compacted aggregate or concrete. This mounting method may be preferred for installations where foreign construction materials are limited. AUGER FOUNDATION Pole foundation is screwed into place and pole is attached via steel coupling hardware. Special installation equipment is required.

2-3/8 x 4 TENON POLE ALUMINUM TUBE 5 x 0.188 WALL 6061-T6 16 2 X 4 HAND HOLE 18 GROUND LEVEL 5 1-1/2 CABLE ENTRY 18 BELOW GRADE

Features: IP65 Internal driver. Input voltage 5VDC. No UV or IR in the beam. Easy to install and operate. Energy saving and long lifespan. Light is soft and uniform safe on the eyes. Instant start, NO flickering, NO humming. Green and eco-friendly without mercury. LED Lamp Model #: Housing Color: Lamp Wattage: Lamp Voltage: LED Chip: PSWP5LED5-50 Black 5W 5V SMD2835 Application: Entrance lighting for residential and commercial properties. Outdoor landscape lighting and courtyard Industrial lighting Efficiency: Luminous Flux: CCT: Dimensions: Units/Ctn 90-100 lpw 450-500 lms 5000K 19.10 X 15.95 X 17.33 8 pcs. 6.81 Weight/Ctn 17.64 lbs. 6.26 7.83

Applications: It is a perfect solution for many outdoor applications such as carports, bus shelters, warehouses, temporary shelters, outdoor kiosks, street kiosks, camping tents, Boats or any remote locations where grids are a challenge. Power and length of the lights can be customized to meet different project requirements. The All-in-One Solar LED Batten Light is the first solar lighting system for outdoor use as a tube light. Composed of a built-in microwave sensor, Lithium battery, high quality MPPT controller, and LED light source. There are more than 70 different lighting modes built into the controller, and it can be easily set by the remote control. The solar light head and solar panel connected by 2.5MM2 cable with UNIVERSAL MC4 plugs. Distance from light to panel can reach to 30 meters. A reliable and durable stand alone solar solution for sustainable lighting. Works great in arid, tropical, and high temperate environments. 3.62 3.31 23.62 Remote Setting LED Lamp Battery Microwave Sensor Model #: MC4 Plugs Connection Housing Color: Lamp Wattage: Lamp Voltage: LED Chip: Efficiency: Luminous Flux: Work Temperature: CCT: Lithium Battery PSBL12LED12-65 White 12W 12V SMD2836 125 lpw 1500 lms -4 F ~ +149 F 6500K Angle: 120 Power: Voltage: Charging Time: Lighting Time: Fixture Controller Capacity: 40W 18V 6 Hours >48 Hrs 12Hrs/Day 130 lms/w Programmable PWM Solar Controller 144W Nominal Voltage: 12V Dimensions: Units/Ctn Weight/Ctn 27.56 x 8.66 x 11.81 6 pcs. 8.16 lbs.

A.250 1.75 Acrylic Enclosure 3-5W LED MR16 Lamps Type 3 Light Distribution 42 Battery Compartment Aluminum Body Tamper Proof Screws.250 A 11 Aluminum Top Plate Secured with Tamper Proof Screws SECTION A-A LED Lamp Model #: Housing Color: Lamp Wattage: PSB10LED12-30 PSB10LED12-60 Black Black 10W 10W Aluminum Powder Coat Finish Anchor Bolts 0.75 x 12 x 3 per ASTM 1554-55, Includes 8-Hex Nuts and 8- Flat Washers Solar Panel CCT: 3000K 6000K Power: 5W 5W Voltage: 12V 12V Lighting Time: 12 Hrs 12 Hrs Lifetime: 10 Yrs 11 Yrs Battery Lifetime: 2 Yrs 2Yrs Dimensions: 10" x 10" x 42" 10" x 10" x 42" Units/Ctn 1 pc. 1 pc.

12 5W UL Listed Solar Panels 10 Square Aluminum Tube Powder Coat Finish Paint Color Silver Rubber Protection Around Table 10 4 LED Lights One on each side Total of 8 USB Chargers 2 on each side, Two USB Chargers 1A, 2A Battery Compartment 3-120V, 18AH 42 Ø 22.00 ANCHOR BOLTS 0.75"X24'X3" PER ASTM 1554-55 INCLUDES 8-HEX NUTS AND 8-FLAT WASHERS 20 x20 x3/4 Aluminum Base

12950 NW 25TH STREET SUITE 300 MIAMI, FL 33182 T: 305.640.0465 f: 305.640.0468 Email: info@jademar.com Web: www.photonxled.com